Blue Dye Removal Research Articles

Valorization of agricultural by-product Moringa stenopetala seed husks into activated carbon for Reactive Black and Basic Blue dye removal from textile wastewater

Valorization of agricultural by-product Moringa stenopetala seed husks into activated carbon for Reactive Black and Basic Blue dye removal from textile wastewater

Sustainable removal of methylene blue dye from textile effluents by magnetized Tea waste and Peanut shells

Methylene blue finds numerous applications across various industries but its prolonged exposure to living organisms can result in significant health risks. In this study, the adsorption of magnetized Peanut shells and Tea waste for methylene blue dye removal has been reported. The biosorbents were synthesized by co-precipitation method and their suitability for methylene blue adsorption was confirmed through characterization techniques including Scanning Electron Microscope, Fourier Transfer Infrared Spectroscopy and X-Ray Diffraction analysis. After optimizing for pH (8.0), temperature (312 k), biosorbents dosage 25 mg/L with contact periods (35 min for Tea waste@Fe3O4 and 40 min for Peanut shells@Fe3O4), and initial methylene blue concentrations (5 ppm), the removal percentages of 95.88 % for Tea waste@Fe3O4 and 84.11 % for Peanut shells@Fe3O4 were achieved effectively. The equilibrium data for MB dye adsorption fitted well with the Langmuir model (R2 = 0.99) for Tea waste@Fe3O4 which indicated the formation of monolayer formation of adsorbate at the surface of adsorbent and the Freundlich model (R2 = 0.98) for Peanut shells@Fe3O4 confirmed the multilayers formation of MB dye at the material surface. Kinetic studies specified that both Tea waste@Fe3O4 (R2 = 0.99) and Peanut shells@Fe3O4 (R2 = 0.99) followed the pseudo-second order. Thermodynamic analysis showed that the adsorption process on Tea waste@Fe3O4 and Peanut shells@Fe3O4 was spontaneous (−ΔG) and endothermic. Tea waste@Fe3O4 exhibited ΔH (27.97 kJ/mol) and entropy ΔS (93.69 kJ/mol) while ΔH = 208.9 kJ/mol and ΔS 62 kJ/mol were found for Peanut shells@Fe3O4. The performance of the proposed biosorbent in industrial effluent demonstrated their effectiveness, highlighting their potential as a cost effective and sustainable solution for wastewater treatment.

Methylene blue dye removal by adsorption with coconut coir and acid-treated forms: adsorption-desorption study, MPR and modeling using artificial intelligence

A batch study is conducted to remove methylene blue (MB) dye from an aqueous solution using coconut coir and its acid-treated forms. The sulfuric acid-treated coconut coir (SCC), phosphoric acid-treated coconut coir (PCC) and untreated coconut coir (UCC) were prepared. Adsorbents were characterized via BET, SEM, pHPZC, FTIR, and FT-Raman analysis. Adsorbent’s total organic carbon (TOC) and the number of oxygen-containing functional groups like carboxylic, lactonic and phenolic, total acidic, and basic groups were also estimated. FTIR and FT-Raman studies establish functional groups responsible for dye removal. The operating parameters were optimized through experiments. Dye was removed maximally at the lowest temperature, 303K. Langmuir and Temkin isotherm models use linear equations, and the Pseudo-second-order kinetic model uses a nonlinear equation, which fits well. The adsorption capacity of SCC, PCC and UCC adsorbents was 88.18 ± 0.63 mg/g, 92.68 ± 2.74 mg/g and 76.39 ± 0.36 mg/g, respectively, for 303K. Intraparticle diffusion dominated more than film diffusion. Physisorption was estimated by applying the Dubinin-Radushkevich (D-R) isotherm model. Thermodynamic study indicates a spontaneous, favorable, exothermic process. 75% glacial acetic acid and 100% methanol are the best solvents for desorbing dye-loaded adsorbents. Porous coir and non-covalent interactions like hydrogen bonding, van der Waals force and π-π interaction between dye and coir are vital in the dye removal process. The regression equation has been successfully formulated, and the application of a genetic algorithm has predicted the percentage removal of methylene blue dye.

Blended tropical pineapple peel and crown fruit wastes as precursor for activated carbon by microwave-assisted H3PO4 activation: process optimization for methylene blue dye removal

Blended tropical pineapple peel and crown fruit wastes as precursor for activated carbon by microwave-assisted H3PO4 activation: process optimization for methylene blue dye removal

Green-synthesized CuO and ZnO nanoparticles derived from Calotropis gigantea (Apple of Sodom): enhancing plant growth, efficient dye removal, and potent antibacterial applications.

Nanoparticles, owing to their unique physicochemical properties, have garnered significant attention in various scientific disciplines, including materials science, chemistry, biology, and environmental engineering. In recent years, the synthesis of metal oxide nanoparticles, such as NiO, Fe2O3, ZnO, SnO2, and CuO via green routes, has gained attraction due to their diverse applications in fields ranging from catalysis and electronics to medicine and environmental remediation. This study focuses on the green synthesis of copper oxide (CuO) and zinc oxide (ZnO) nanoparticles using Calotropis gigantea (Apple of Sodom) leaf extract as a reducing agent and stabilizer, with zinc nitrate (ZnNO3.6H2O) and copper nitrate (CuNO3.3H2O) as precursors. The hexagonal phase of ZnO and monoclinic plan structure of CuO with high crystallinity was confirmed by XRD and elemental composition by EDX analysis. With the help of an SEM image, particle size measured for CuO and ZnO using ImageJ software was found to be 56.08nm and 46.49nm, respectively. This study investigates the efficacy of nanoparticles in wastewater treatment, particularly focusing on methylene blue dye decolorization using the statistical processing of response surface methodology (RSM) using the Box-Behnken method. Additionally, it explores the impact of synthesized nanoparticles on seed growth enhancement, using Vigna radiata (green gram) seeds immersed in various doses of nanoparticles (0, 0.5, 1, 1.5, 2mg/30mL). Furthermore, the antibacterial activity of the nanoparticles against both gram-positive and gram-negative bacteria is evaluated. The results confirm the effectiveness of the materials for methylene blue dye removal, achieving 80.53% with CuO and 78.25% with ZnO. Significant seed growth was observed with a low nanoparticle dosage of 1.5mg/30mL, resulting in the highest seedling vigour index and germination percentage. This reduces the need for fertilizers and lessens environmental impact.

Polymer based Carbon Aerogels for Methylene blue and indigo carmine dyes removal

Abstract Herein we prepared the polymer-based carbon aerogel (CAs) from resorcinol and thiophene-2-carboxyaldehyde. The prepared CAs was characterized using the powder X-Ray diffraction (PXRD) spectroscopy and Fourier Transform Infra-Red (FT-IR) spectroscopy. The above characterization techniques confirmed the formation of CA’s. As we know the CA’s possess good surface area. Hence, we used the CAs for the purpose of removing the organic dyes from the water. In the application purpose we removed Methylene Blue (MB) dye and Indigo Carmine (IC) dye from the water. Initial results confirmed that CAs actively removes 100% dyes in 3.5 and 4 h for MB and IC dyes respectively.

Adsorption study of methylene blue dye removal with activated carbon derived from Leucaena leucocephala wastes prepared via H3PO4 activation

Adsorption study of methylene blue dye removal with activated carbon derived from Leucaena leucocephala wastes prepared via H3PO4 activation

MnO2 decoration onto the guava leaves: A sustainable and cost-effective material for methylene blue dye removal

Excessive number of dyes in water is becoming the main cause of water pollution, which is very important to remove because it is harmful. Dye contaminated water is being treated by various methods. Adsorption method can be considered best for the study of dye removal due to several technological reasons. The adsorption method has also been emphasized in this study. In the present work, a nano-bio-composite was fabricated by growing manganese oxide nanoparticles on abundant cellulosic guava leaf powder. This allows nanocomposite to be prepared in large quantities at nominal cost. The characterization technique confirmed the irregular growth of manganese oxide nanoparticles onto the guava leaf powder. The electrostatic and non-electrostatic interactions was confirmed in between manganese oxide nanoparticles and the carbon structure of guava leaf powder. The massive functional groups were found to be in the prepared nano-bio-composite. The grain size of prepared material was in nano range. The developed nano-bio-composite was used to remove methylene blue from water. This showed a very good adsorptive capacity for methylene blue. The analyzed adsorption data was modelled through isotherms, kinetics and thermodynamics models. The nature of the adsorption process was determined to be spontaneous and exothermic. The reusability test was carried out for five adsorption-desorption cycles. The reusability results suggested the better removal efficiency (%) in the first two cycles with only 20 % reduction in removal efficiency (%). The leaching test result revealed the good stability of MnO2/GL at neutral pH. It was a unique and cheap adsorbent of its kind, which had not been noticed anywhere before.

Polyethersulfone/Chamomile Mixed Matrix Membrane for Methylene Blue Dye Removal from Wastewater

Polyethersulfone/Chamomile Mixed Matrix Membrane for Methylene Blue Dye Removal from Wastewater

Numerical parametric optimization with desirability functions for methylene blue dye removal by sunflower seed pericarp activated carbon

Numerical parametric optimization with desirability functions for methylene blue dye removal by sunflower seed pericarp activated carbon

Structural Analysis and Adsorption Studies of (PbO, MgO) Metal Oxide Nanocomposites for Efficient Methylene Blue Dye Removal from Water.

In the present work, magnesium oxide (MgO) and lead oxide (PbO) nanoparticles were prepared by the co-precipitation method. Their structural parameters and morphology were investigated using XRD, HRTEM, and FTIR. The formation of the phases was seen to have small average crystallite sizes and an orthorhombic crystal structure for both MgO and PbO nanoparticles. The results of HR-TEM showed irregularly shaped nanoparticles: quasi-spherical or rod-like shapes and spherical-like shapes for MgO and PbO nanoparticles, respectively. The produced nanoparticles' size using X-ray diffraction analysis was found to be 17 nm and 41 nm for MgO and PbO nanoparticles, respectively. On the other hand, it was observed from the calculations that the optical band gap obeys an indirect allowed transition. The calculated values of the band gap were 4.52 and 4.28 eV for MgO and PbO NPs, respectively. The MB was extracted from the wastewater using the prepared composites via absorption. Using a variety of kinetic models, the adsorptions were examined. Out of all the particles, it was discovered that the composites were best. Furthermore, of the models currently under consideration, the pseudo-second-order model best fit the degradation mechanism. The resultant composites could be beneficial for degrading specific organic dyes for water purification, as well as applications needing a wider optical band gap.

Banana leaves powder as an effective, low-cost adsorbent for methyl blue dye removal: kinetics, isothermal, thermodynamics, ANN and DFT analysis

Banana leaves powder as an effective, low-cost adsorbent for methyl blue dye removal: kinetics, isothermal, thermodynamics, ANN and DFT analysis

A Novel Coal-Associated Soil as an Effective Adsorbent for Reactive Blue Dye Removal

The project aims to remove reactive blue dye from the effluent of textile industries by utilizing coal-associated soil as an adsorbent, as it possesses effective physical properties and distinguishing characteristics. In comparison to other separation techniques, the adsorption method is the most effective, cost-effective, and straightforward. A batch adsorption investigation was carried out to examine the various adsorption-influencing factors, including solution pH, adsorbent dosage, contact time, temperature, and dye concentration. Contact time of 30 min, an adsorbent dosage of 10g.100 mL-1, a solution pH of 7, a temperature of 30°C, and an initial dye concentration of 100 mg.L-1 were found to be optimal for dye adsorption. Using two distinct kinetic models, the evaluation of kinetic studies revealed that the pseudo-second-order provided the greatest fit, with a higher R2 value than the pseudo-first-order. The thermodynamic parameters Gibbs free energy (ΔG°), entropy (ΔS°), and enthalpy (ΔH°) indicated that the current adsorption system was exothermic and spontaneous. Further study of the adsorption isotherm revealed that the Langmuir isotherm model provided the best fit, with an R2 value of 0.977%.

Metal-free adsorption and photodegradation methods for methylene blue dye removal using different reduction grades of graphene oxide

The release of organic pollutants and dyes into the environment by industries has had profound and harmful effects on both humans and ecosystems. Graphene oxide (GO) and its reduced form have been investigated for their effectiveness in removing pollutant dyes. GO nano-powder was synthesized using an improved version of Hummer's method and subsequently thermally reduced at various temperatures, including 125, 150, 175, and 200 °C, under vacuum conditions. In the X-ray diffraction spectra, an intense (001) diffraction peak was initially observed at 9.136° (2θ) for pristine GO. This peak gradually shifted towards higher angles as the reduction process took place and eventually disappeared when the GO was reduced at 200 °C. The intensity ratio of the D and G bands (ID/IG ratio) for GO nano-powder in the Raman spectra decreased from 0.94 to 0.76 due to the reduction process. The FTIR spectra of GO and reduced graphene oxide (rGO) also illustrated the reduction process. The bandgap of pristine GO significantly decreased from 2.31 to 0.73 eV, as determined by ultraviolet–visible (UV–Vis) diffuse reflectance spectrophotometry during the reduction process. The surface area and pore volume of both pristine GO and rGO-150 were determined using the BET (Brunauer-Emmett-Teller) and BJH (Barrett-Joyner-Halenda) methods. The results indicated an increase in the BET surface area from 6.61 to 7.86 m2/g and a corresponding enhancement in pore volume from 0.118 to 0.128 cc/g after reduction. The adsorption and photocatalytic degradation behavior of pristine GO and reduced graphene oxides (rGOs) were examined using methylene blue dye. The pristine GO demonstrated impressive adsorption capability, effectively removing the dye by 85.78 % within just 15 min and achieving nearly 97 % removal after 4 h. In contrast, the highest photocatalytic degradation of methylene blue, about 47.58 %, was attained for the rGO sample reduced at 150 °C under the illumination of visible light.

Facile fabrication of sulfonated porous yeast carbon microspheres through a hydrothermal method and their application for the removal of cationic dye

Water pollution containing dyes become increasingly serious environmental problem with the acceleration of urbanization and industrialization process. Renewable adsorbents for cationic dye wastewater treatment are becoming an obstacle because of the difficulty of desorbing the dye from the adsorbent surface after adsorption. To overcome this dilemma, herein, we report a hydrothermal method to fabricate sulfonic acid modified yeast carbon microspheres (SA/YCM). Different characterization techniques like scanning electron microscopy, FTIR spectroscopy, and X-ray diffraction have been used to test the SA/YCM. Decorated with sulfonic acid group, the modified yeast carbon microspheres possess excellent ability of adsorbing positively charged materials. The removal rate of Methyl blue (MB) by renewable adsorbent SA/YCM can reach 85.3% when the concentration is 500 mg/L. The SA/YCM regenerated by HCl showed excellent regeneration adsorption capacity (78.1%) after five cycles of adsorption–desorption regeneration experiment. Adsorption isotherm and kinetic behaviors of SA/YCM for methylene blue dyes removal were studied and fitted to different existing models. Owing to the numerous sulfonic acid groups on the surface, the SA/YCM showed prominent reusability after regeneration under acidic conditions, which could withstand repeated adsorption–desorption cycles as well as multiple practical applications.

Exploring the potential of Cu-LDHs composite for efficient Coomassie brilliant blue dye removal: evaluating adsorption isotherms and antibacterial activity

Exploring the potential of Cu-LDHs composite for efficient Coomassie brilliant blue dye removal: evaluating adsorption isotherms and antibacterial activity

Blended Nephelium lappaceum and Durio zibethinus wastes for activated carbon production via microwave-ZnCl2 activation: optimization for methylene blue dye removal

Herein, this work targets to employ the blended fruit wastes including rambutan (Nephelium lappaceum) peel and durian (Durio zibethinus) seed as a promising precursor to produce activated carbon (RPDSAC). The generation of RPDSAC was accomplished through a rapid and practical procedure (microwave-ZnCl2 activation). To evaluate the adsorptive capabilities of RPDSAC, its efficacy in eliminating methylene blue (MB), a simulated cationic dye, was measured. The Box–Behnken design (BBD) was utilized to optimize the crucial adsorption parameters, namely A: RPDSAC dose (0.02–01 g/100 mL), B: pH (4–10), and C: time (2–6 min). The BBD design determined that the highest level of MB removal (79.4%) was achieved with the condition dosage of RPDSAC at 0.1 g/100 mL, contact time (6 min), and pH (10). The adsorption isotherm data is consistent with the Freundlich concept, and the pseudo-second-order versions adequately describe the kinetic data. The monolayer adsorption capacity (qmax ) of RPDSAC reached 120.4 mg/g at 25 °C. Various adsorption mechanisms are involved in the adsorption of MB dye onto the surface of RPDSAC, including π–π stacking, H-bonding, pore filling, and electrostatic forces. This study exhibits the potential of the RPDSAC as an adsorbent for removal of toxic cationic dye (MB) from contaminated wastewater.

Constructing sustainable keratin/algae biohydrogels for efficient removal of aniline blue via a pre-extrusion induced self-crosslinking strategy

Two environmentally friendly hierarchical porous biohydrogels, honeycomb keratin hydrogel (HKH) and spongy keratin-algae hydrogel (SKAH), were fabricated using an extrusion approach by using extruded keratin with or without algae. The extruded keratin exhibits exceptional self-crosslinking properties, making the biohydrogels behave with excellent adsorption performance for aniline blue dye removal from wastewater. In addition, the SKAH demonstrated a significantly higher maximum uptake capacity of 442.56 mg/g, surpassing that of the HKH (134.63 mg/g). This enhancement can be attributed to the looser porous structure of the SKAH, which enables better exposure of active groups within the material, which indicates the introduction of algae led to noticeable variations in the microstructure and performance of the adsorbent. Systematic investigation on the adsorption performance of isotherm and kinetics analyses indicated that chemisorption played a predominant role in governing the overall rate of adsorption. Overall, this extrusion approach allows for a simplified and non-toxic method of synthesizing these biohydrogels without the need for additional chemical reagents or biocross-linkers, promoting their eco-friendliness and reducing potential environmental impacts. The unique feature presents significant opportunity to fabricate sustainable and eco-friendly biohydrogel adsorbent for wastewater treatment.

Neem biomass derived carbon quantum dots synthesized via one step ultrasonification method for ecofriendly methylene blue dye removal

This article presents a one-step ultrasonication technique for generating biomass carbon dots (BCDs) from neem bark (Azadirachta indica) powder. The BCDs were characterized using modern techniques such as UV–Vis, FTIR, Raman, XRD, HRTEM, FESEM, EDAX, and Zeta potential analyses. Unlike traditional nanocomposite bed systems, this study utilized BCDs as a liquid-phase adsorbent for the regenerative adsorption of the environmentally harmful dye, methylene blue (MB), through an in-situ precipitation reaction. This involved the formation of BCDs-MB adduct via an electrostatic mechanism. The adsorption capacity and percentage of removal were remarkable at 605 mg g–1 and 64.7% respectively, exceeding various solid-based adsorption methods in the literature. The Langmuir isotherm and pseudo-second-order kinetics model provided an excellent fit for this system. The calculated thermodynamic parameter, Gibbs free energy change (ΔG) was negative, indicating a spontaneous, exothermic, and physisorption-based mechanism. The regenerative capacity of our system was further demonstrated by successfully extracting and recovering the MB dye (64%) using ethyl alcohol as the solvent. This method provides an efficient means of recovering valuable cationic organic dye compounds from contaminated environments.

Green Synthesis of Titanium dioxide Nanoparticles by utilizing Marchantia polymorpha and their Application in Methylene Blue Dye Removal

Green Synthesis of Titanium dioxide Nanoparticles by utilizing Marchantia polymorpha and their Application in Methylene Blue Dye Removal