Blood-material Interactions Research Articles

Research progress on blood compatibility of hemoperfusion adsorbent materials.

This comprehensive review examines the latest developments in improving the blood compatibility of hemoperfusion adsorbents. By leveraging advanced coating and modification techniques, including albumin-collodion, cellulose, hydrogel, and heparin coatings, notable enhancements in blood compatibility have been achieved across diverse adsorbent types, such as carbon-based, resin-based, and polysaccharide-based materials. Despite promising laboratory results, the intricate manufacturing processes and elevated costs present significant challenges for broad clinical application. Therefore, future endeavors should focus on cost-benefit analysis, large-scale production strategies, in-depth exploration of blood-material interactions, and innovative technologies to propel the development of safer and more effective blood purification therapies.

A Janus Gelatin Sponge with a Procoagulant Nanoparticle-Embedded Surface for Coagulopathic Hemostasis.

Apart from the wide and safe application of natural polymer-based hemostatic materials/devices, it is still desirable to develop new types of hemostatic materials that can achieve both potent coagulopathic hemostasis and a facile preparation process. In this work, one Janus gelatin sponge (J-ZGS) is readily constructed for both coagulation-dependent and coagulopathic hemostasis by embedding zein nanoparticles on the surface of a self-prepared gelatin sponge (S-GS): zein nanoparticles were facilely prepared by an antisolvent method to achieve procoagulant blood-material interactions, while S-GS was prepared by freeze-drying a foaming gelatin solution. Due to the distinct secondary structure, the optimal zein nanoparticles possessed a higher in vitro hemostatic property than the pristine zein powder and other nanoparticles, the underlying mechanism of which was revealed as the superior RBC/platelet adhesion property in the presence/absence of plasma proteins. Compared with S-GS and a commercial gelatin sponge, J-ZGS achieved a significantly higher in vitro hemostatic property and similarly good blood compatibility/cytocompatibility. Moreover, in vivo artery-injury models confirmed the outstanding hemostatic performance of J-ZGS under both coagulation-dependent and coagulopathic conditions. Our work offers an appealing approach for developing potent hemostatic sponges from natural polymer-based nanoparticles that could be further extended to versatile hemostatic materials for coagulopathic hemostasis.

Tuning Blood-Material Interactions to Generate Versatile Hemostatic Powders and Gels.

Polymer-based hemostatic materials/devices have been increasingly exploited for versatile clinical scenarios, while there is an urgent needto reveal the rational design/facile approach for procoagulant surfaces through regulating blood-material interactions. In this work, degradable powders (PLPS) and thermoresponsive gels (F127-PLPS) are readily developed as promising hemostatic materials for versatile clinical applications, through tuning blood-material interactions with optimized grafting of cationic polylysine: the former is facilely prepared by conjugating polylysine onto porous starch particle, while F127-PLPS is prepared by the simple mixture of PLPS and commercial thermosensitive polymer. In vitro and in vivo results demonstrate that PLPS2 with the optimal-/medium content of polylysine grafts achieve the superior hemostatic performance. The underlying procoagulant mechanism of PLPS2 surface is revealed as the selective fibrinogen adsorption among the competitive plasma-protein-adsorption process, which is the foundation of other blood-material interactions. Moreover, in vitro results confirm the achieved procoagulant surface of F127-PLPS through optimal PLPS2 loading. Together with the tunable thermoresponsiveness, F127-PLPS exhibits outstanding hemostatic utilization in both femoral-artery-injury and renal-artery-embolization models. The work thereby pioneers an appealing approach for generating versatile polymer-based hemostatic materials/devices.

Challenge of material haemocompatibility for microfluidic blood-contacting applications.

Biological applications of microfluidics technology is beginning to expand beyond the original focus of diagnostics, analytics and organ-on-chip devices. There is a growing interest in the development of microfluidic devices for therapeutic treatments, such as extra-corporeal haemodialysis and oxygenation. However, the great potential in this area comes with great challenges. Haemocompatibility of materials has long been a concern for blood-contacting medical devices, and microfluidic devices are no exception. The small channel size, high surface area to volume ratio and dynamic conditions integral to microchannels contribute to the blood-material interactions. This review will begin by describing features of microfluidic technology with a focus on blood-contacting applications. Material haemocompatibility will be discussed in the context of interactions with blood components, from the initial absorption of plasma proteins to the activation of cells and factors, and the contribution of these interactions to the coagulation cascade and thrombogenesis. Reference will be made to the testing requirements for medical devices in contact with blood, set out by International Standards in ISO 10993-4. Finally, we will review the techniques for improving microfluidic channel haemocompatibility through material surface modifications-including bioactive and biopassive coatings-and future directions.

Titanium surface interacting with blood clot enhanced migration and osteogenic differentiation of bone marrow mesenchymal stem cells.

Introduction: Blood clot formation is the initial phase upon implantation, and the feature of blood clot orchestrates the following complement system activation, coagulation cascade, and bone marrow mesenchymal stromal cells (BMSCs) recruitment. This study aimed to investigate the effect of implant surface on blood-material interactions and subsequent BMSC cellular behaviors. Methods: This study was established to imitate the physiological process of implantation in vivo and in vitro. Whole blood was incubated with polished titanium (PT) surfaces and sandblasted and double acid-etching (SLA) surfaces for 10min or 2h, then seeded with BMSCs. The adhesion, proliferation, migration, and differentiation of cells were studied at specific time points. Titanium implants were implanted into the tibia in vivo and were screwed out after implantation. The activation of the coagulation cascade, platelets, complement system, and clot networks were assessed and further quantitatively analyzed. Results: Compared with the PT surface, the SLA surface induced the earlier and stronger blood coagulation cascade and formed a more stratified clots network with fibrinogen, platelets, and CD14 positive cell. The adhesion, proliferation, and migration of BMSCs were enhanced by pre-incubated surfaces. The higher levels of the osteogenic-related genes, ALP activity, and calcium nodule formation were showed on SLA surfaces with blood incubation. Conclusion: SLA titanium surfaces play a role in influencing the formation of blood clots and coordinating surface-blood interactions and cell biological processes. These findings provide the idea of modifying the blood clots formed on the implant surface by biomaterials modification and thus has implications for the development of better osteogenic biomaterials.

Osteogenesis, hemocompatibility, and foreign body response of polyvinylidene difluoride-based composite reinforced with carbonaceous filler and higher volume of piezoelectric ceramic phase

Hybrid polymer-ceramic composites have been widely investigated for bone tissue engineering applications. The incorporation of a large amount of inorganic phase, like barium titanate (BaTiO3) with good dispersion, in a polymeric matrix using a conventional processing approach has always been challenging. Also, the comprehensive study encompassing the interactions of key components of living organisms (cell, blood, tissue) with such hybrid composites is not well explored in many published studies. Built on our earlier studies and recognizing the importance of poly(vinylidene fluoride) (PVDF) as a widely used polymer for a wide spectrum of biomedical applications, the present study reports the qualitative and quantitative analysis of the biocompatibility of PVDF composite (PVDF/30BT/3MWCNT) reinforced with large amounts of BaTiO3 (30 wt %) and tailored addition of multiwalled carbon nanotubes (MWCNT; 3 wt %). The melt mixing-extrusion-compression moulding-based processing approach resulted in an enhancement of β-phase content, thermal stability, and wettability in the semi-crystalline PVDF composite. The enhanced hemocompatibility of PVDF/30BT/3MWCNT has been established conclusively by a series of in vitro blood-material interaction assays, including haemolysi, analysis of platelets attachment and activation, dynamic blood coagulation, and plasma recalcification time. The cytocompatibility study confirms an improved adhesion, proliferation, and migration of osteoprogenitor cells (preosteoblasts; MC3T3-E1) on PVDF/30BT/3MWCNT, in a manner better than neat PVDF, in vitro. When these cells were cultured in osteogenic differentiating media, the modulated osteogenesis, in terms of alkaline phosphatase activity, intracellular Ca2+ concentration, and calcium deposition on the PVDF/30BT/3MWCNT, was recorded. Following subcutaneous implantation of PVDF/30BT/3MWCNT in rat model, no apparent variation was recorded in the complete hemogram (blood hematology analysis) or serum biochemistry, post 30-, 60-, and 90-days surgery. Importantly, 90-days post-implantation, the fibrous capsule thickness was significantly reduced in the composites w.r.t PVDF alone, together with better blood vessel formation, indicating improved neovascularization around the composite. This study establishes the efficacy of inorganic fillers in enhancing the biocompatibility of PVDF, which could open up a wide range of biomedical applications.

Promoting Angiogenesis Using Immune Cells for Tissue-Engineered Vascular Grafts.

Implantable tissue-engineered vascular grafts (TEVGs) usually trigger the host reaction which is inextricably linked with the immune system, including blood-material interaction, protein absorption, inflammation, foreign body reaction, and so on. With remarkable progress, the immune response is no longer considered to be entirely harmful to TEVGs, but its therapeutic and impaired effects on angiogenesis and tissue regeneration are parallel. Although the implicated immune mechanisms remain elusive, it is certainly worthwhile to gain detailed knowledge about the function of the individual immune components during angiogenesis and vascular remodeling. This review provides a general overview of immune cells with an emphasis on macrophages in light of the current literature. To the extent possible, we summarize state-of-the-art approaches to immune cell regulation of the vasculature and suggest that future studies are needed to better define the timing of the activity of each cell subpopulation and to further reveal key regulatory switches.

Assessment of the Anti-Thrombogenic Activity of Polyurethane Starch Composites.

The increasing morbidity and mortality of patients due to post-surgery complications of coronary artery bypass grafts (CABPG) are related to blood–material interactions. Thus, the characterization of the thrombogenicity of the biomaterial for cardiovascular devices is of particular interest. This research evaluated the anti-thrombogenic activity of polyurethanes–starch composites. We previously synthesized polyurethane matrices that were obtained from polycaprolactone diol (PCL), polyethylene glycol (PEG), pentaerythritol (PE), and isophorone diisocyanate (IPDI). In addition, potato starch (AL-N) and zwitterionic starch (AL-Z) were added as fillers. The anti-thrombogenic property was characterized by the clot formation time, platelet adhesion, protein absorption, TAT complex levels, and hemolysis. Additionally, we evaluated the cell viability of the endothelial and smooth muscle cells. Statically significant differences among the polyurethane matrices (P1, P2, and P3) were found for protein absorption and the blood clotting time without fillers. The polyurethanes composites with AL-Z presented an improvement in the anti-thrombogenic property. On the other hand, the composites with AL-Z reduced the viability of the endothelial cells and did not significantly affect the AoSCM (except for P1, which increased). These results classify these biomaterials as inert; therefore, they can be used for cardiovascular applications.

The response of soft tissue cells to Ti implants is modulated by blood-implant interactions.

Titanium-based dental implants have been highly optimized to enhance osseointegration, but little attention has been given to the soft tissue-implant interface, despite being a major contributor to long term implant stability. This is strongly linked to a lack of model systems that enable the reliable evaluation of soft tissue-implant interactions. Current in vitro platforms to assess these interactions are very simplistic, thus suffering from limited biological relevance and sensitivity to varying implant surface properties. The aim of this study was to investigate how blood-implant interactions affect downstream responses of different soft tissue cells to implants in vitro, thus taking into account not only the early events of blood coagulation upon implantation, but also the multicellular nature of soft tissue. For this, three surfaces (smooth and hydrophobic; rough and hydrophobic; rough and hydrophilic with nanostructures), which reflect a wide range of implant surface properties, were used to study blood-material interactions as well as cell-material interactions in the presence and absence of blood. Rough surfaces stimulated denser fibrin network formation compared to smooth surfaces and hydrophilicity accelerated the rate of blood coagulation compared to hydrophobic surfaces. In the absence of blood, smooth surfaces supported enhanced attachment of human gingival fibroblasts and keratinocytes, but limited changes in gene expression and cytokine production were observed between surfaces. In the presence of blood, rough surfaces supported enhanced fibroblast attachment and stimulated a stronger anti-inflammatory response from macrophage-like cells than smooth surfaces, but only smooth surfaces were capable of supporting long-term keratinocyte attachment and formation of a layer of epithelial cells. These findings indicate that surface properties not only govern blood-implant interactions, but that this can in turn also significantly modulate subsequent soft tissue cell-implant interactions.

Nanofiber Topographies Enhance Platelet-Fibrinogen Scaffold Interactions.

The initial contact with blood and its components, including plasma proteins and platelets, directs the body's response to foreign materials. Natural scaffolds of extracellular matrix or fibrin contain fibrils with nanoscale dimensions, but how platelets specifically respond to the topography and architecture of fibrous materials is still incompletely understood. Here, planar and nanofiber scaffolds are fabricated from native fibrinogen to characterize the morphology of adherent platelets and activation markers for phosphatidylserine exposure and α-granule secretion by confocal fluorescence microscopy and scanning electron microscopy. Different fibrinogen topographies equally support the spreading and α-granule secretion of washed platelets. In contrast, preincubation of the scaffolds with plasma diminishes platelet spreading on planar fibrinogen surfaces but not on nanofibers. The data show that the enhanced interactions of platelets with nanofibers result from a higher locally accessible surface area, effectively increasing the ligand density for integrin-mediated responses. Overall, fibrinogen nanofibers direct platelets toward robust adhesion formation and α-granule secretion while minimizing their procoagulant activity. Similar results on fibrinogen-coated polydimethylsiloxane substrates with micrometer-sized 3D features suggest that surface topography could be used more generally to steer blood-materials interactions on different length scales for enhancing the initial wound healing steps.

Balloon expandable coronary stent materials: a systematic review focused on clinical success

Balloon expandable coronary stenting has revolutionized the field of interventional cardiology as a potential, minimally invasive modality for treating coronary artery disease. Even though stenting is successful compared to angioplasty (that leaves no stent in place), still there are many associated clinical complications. Bare metal stents are associated with in-stent restenosis caused mostly by neointimal hyperplasia, whereas success of drug-eluting stents comes at the expense of late-stent thrombosis and neoatherosclerosis. Even though innovative and promising, clinical trials with bioabsorbable stents reported thrombosis and a rapid pace of degradation without performing scaffolding action in several instances. It should be noted that a vast majority of these stents are based on a metallic platform which still holds the potential to mitigate major cardiovascular events and reduced economic burden to patients, alongside continuous improvement in stent technology and antiplatelet regimes. Hence, a systematic review was conducted following PRISMA guidelines to assess the clinically relevant material properties for a metallic stent material. From a materials perspective, the major causes identified for clinical failure of stents are inferior mechanical properties and blood-material interaction–related complications at the stent surface. In addition to these, the stent material should possess increased radiopacity for improved visibility and lower magnetic susceptibility values for artefact reduction. Moreover, the review provides an overview of future scope of percutaneous coronary interventional strategy. Most importantly, this review highlights the need for an interdisciplinary approach by clinicians, biomaterial scientists, and interventional cardiologists to collaborate in mitigating the impediments associated with cardiovascular stents for alleviating sufferings of millions of people worldwide.

Failure Analysis of TEVG's I: Overcoming the Initial Stages of Blood Material Interaction and Stabilization of the Immune Response.

Vascular grafts (VG) are medical devices intended to replace the function of a diseased vessel. Current approaches use non-biodegradable materials that struggle to maintain patency under complex hemodynamic conditions. Even with the current advances in tissue engineering and regenerative medicine with the tissue engineered vascular grafts (TEVGs), the cellular response is not yet close to mimicking the biological function of native vessels, and the understanding of the interactions between cells from the blood and the vascular wall with the material in operative conditions is much needed. These interactions change over time after the implantation of the graft. Here we aim to analyze the current knowledge in bio-molecular interactions between blood components, cells and materials that lead either to an early failure or to the stabilization of the vascular graft before the wall regeneration begins.

Vascular Polyurethane Prostheses Modified with a Bioactive Coating-Physicochemical, Mechanical and Biological Properties.

This study describes a method for the modification of polyurethane small-diameter (5 mm) vascular prostheses obtained with the phase inversion method. The modification process involves two steps: the introduction of a linker (acrylic acid) and a peptide (REDV and YIGSR). FTIR and XPS analysis confirmed the process of chemical modification. The obtained prostheses had a porosity of approx. 60%, Young’s Modulus in the range of 9–11 MPa, and a water contact angle around 40°. Endothelial (EC) and smooth muscle (SMC) cell co-culture showed that the surfaces modified with peptides increase the adhesion of ECs. At the same time, SMCs adhesion was low both on unmodified and peptide-modified surfaces. Analysis of blood-materials interaction showed high hemocompatibility of obtained materials. The whole blood clotting time assay showed differences in the amount of free hemoglobin present in blood contacted with different materials. It can be concluded that the peptide coating increased the hemocompatibility of the surface by increasing ECs adhesion and, at the same time, decreasing platelet adhesion. When comparing both types of peptide coatings, more promising results were obtained for the surfaces coated with the YISGR than REDV-coated prostheses.

On the origin of better hemocompatibility of the BCxNyOz coatings

The development of hemocompatible coatings on metallic implants is one of the challenges for blood-contacting implantable devices. In this paper, we investigated the blood-material interaction of BCxNyOz coatings deposited on Ti-6Al-4V substrates, using reactive radiofrequency magnetron sputtering technique with variation in nitrogen (N2) flow rate. A series of experiments, including hemolysis tests, erythrocytes, and platelets adhesion and activation analysis, dynamic blood coagulation, and plasma recalcification time tests, were performed to understand the blood-material interactions, qualitatively and quantitatively. The results revealed that the degree of hemolysis on all the samples was below 2.5%, suggesting their favourable interaction with RBCs. The interactions between erythrocytes and platelets with all the BCxNyOz coatings were reduced significantly compared to Ti-6Al-4V. BCxNyOz coatings could substantially delay the time of blood coagulation to the period of 60 min. The plasma recalcification time of coatings was also increased significantly. An effort has been made to rationalize the difference in hardness or blood compatibility parameters in terms of [N]/[B] or [N]/[C] ratio. The present study conclusively establishes that BCxNyOz coatings can significantly enhance hemocompatibility, thereby opening up a myriad of biomedical applications.

Ex vivo evaluation of blood coagulation on endothelial glycocalyx-inspired surfaces using thromboelastography

Present blood-contacting materials have not yet demonstrated to be effective in reducing blood coagulation without causing additional side effects clinically. We have developed an endothelial glycocalyx-inspired biomimetic surface that combines nanotopography, heparin presentation, and nitric oxide (NO)-releasing features. The resulting modified surfaces have already shown promise in reducing unfavorable blood-material interactions using platelet-rich plasma. In this study, the efficacy of modified surfaces for reducing coagulation of human whole blood was measured. In addition, the effects of leached polysaccharides and chemical modification of the modified surfaces were evaluated. Leached polysaccharides in the incubation solution were detected by a refractive index method to determine the potential influences of these modified surfaces on the blood coagulation observation. Chemical modifications by the nitrosation process on the polysaccharides in the modified surfaces were detected using attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR). Clot formation parameters were measured using thromboelastography (TEG), a clinically relevant technique to evaluate whole blood coagulation. No polysaccharides were detected in the heparinized polyelectrolyte multilayer-coated titania nanotube array surface (TiO2NT + PEM) incubation solution; however, polysaccharides were detected from NO-releasing TiO2NT + PEM surface (TiO2NT + PEM + NO) incubation solution both after the nitrosation process and after all NO was released. The structures of thiolated chitosan and heparin were altered by t-butyl nitrite. All heparin-containing surfaces were shown to slow or inhibit clot formation. This study is the first to evaluate these endothelial glycocalyx-inspired surfaces using clinically relevant parameters, as well as proposing potential influences of these modified surfaces on the inhibition of clot formation.

Biomimetic silk biomaterials: Perlecan-functionalized silk fibroin for use in blood-contacting devices

Blood compatible materials are required for the development of therapeutic and diagnostic blood contacting devices as blood-material interactions are a key factor dictating device functionality. In this work, we explored biofunctionalization of silk biomaterials with a recombinantly expressed domain V of the human basement membrane proteoglycan perlecan (rDV) towards the development of blood compatible surfaces. Perlecan and rDV are of interest in vascular device development as they uniquely support endothelial cell, while inhibiting smooth muscle cell and platelet interactions. rDV was covalently immobilized on silk biomaterials using plasma immersion ion implantation (PIII), a new method of immobilizing proteins on silk biomaterials that does not rely on modification of specific amino acids in the silk protein chain, and compared to physisorbed and carbodiimide immobilized rDV. Untreated and treated silk biomaterials were examined for interactions with blood components with varying degrees of complexity, including isolated platelets, platelet rich plasma, blood plasma, and whole blood, both under agitated and flow conditions. rDV-biofunctionalized silk biomaterials were shown to be blood compatible in terms of platelet and whole blood interactions and the PIII treatment was shown to be an effective and efficient means of covalently immobilizing rDV in its bioactive form. These biomimetic silk biomaterials are a promising platform toward development of silk-based blood-contacting devices for therapeutic, diagnostic, and research applications. Statement of significanceBlood compatible materials are required for the development of therapeutic and diagnostic blood contacting devices as blood-material interactions are a key factor dictating device functionality. In this work, we explored biofunctionalization of silk biomaterials with a recombinantly expressed domain V (rDV) of the human basement membrane proteoglycan perlecan towards the development of blood compatible surfaces. Perlecan and rDV are of interest in vascular device development as they uniquely support endothelial cell, while inhibiting smooth muscle cell and platelet interactions. rDV was covalently immobilized on silk biomaterials using plasma immersion ion implantation (PIII), a new method of immobilizing proteins on silk biomaterials that does not rely on modification of specific amino acids in the silk protein chain. These biomimetic silk biomaterials are a promising platform toward development of silk-based blood-contacting devices for therapeutic, diagnostic, and research applications.

Blood-Compatible Materials: Vascular Endothelium-Mimetic Surfaces that Mitigate Multiple Cell-Material Interactions.

When flowing whole blood contacts medical device surfaces, the most common blood-material interactions result in coagulation, inflammation, and infection. Many new blood-contacting biomaterials have been proposed based on strategies that address just one of these common modes of failure. This study proposes to mitigate unfavorable biological reactions that occur with blood-contacting medical devices by designing multifunctional surfaces, with features optimized to meet multiple performance criteria. These multifunctional surfaces incorporate the release of the small molecule hormone nitric oxide (NO) with surface chemistry and nanotopography that mimic features of the vascular endothelial glycocalyx. These multifunctional surfaces have features that interact with coagulation components, inflammatory cells, and bacterial cells. While a single surface feature alone may not be sufficient to achieve multiple functions, the release of NO from the surfaces along with their modification to mimic the endothelial glycocalyx synergistically improves platelet-, leukocyte-, and bacteria-surface interactions. This work demonstrates that new blood-compatible materials should be designed with multiple features, to better address the multiple modes of failure of blood-contacting medical devices.

In vitro haemocompatibility assessment of acrylic acid deposited on solid, polyurethane substrate

The main purpose of the work was to assess the haemocompatible properties of polyurethane discs with a modified surface dedicated to cardiovascular system regeneration. They were coated with acrylic acid-based material to inhibit the activation of the blood coagulation cascade. This coating improved the wettability of the material, leading to the prevention of protein adsorption on the surface. The blood-material interaction was analyzed in dynamic conditions with a specially designed tester, which helps to control blood-material interaction under high shear stress conditions. The corresponding numerical model of the tester was also developed by finite volume method (FVM). The 3D FVM model allows the determination of shear stresses applying different flow and boundary conditions representing blood-material interactions. The haemocompatibility analyses were performed through in vitro tests using a blood flow simulator. They revealed a low probability of activation of blood coagulation and low leukocyte activation. The original mechanical set-up to test the blood-material interaction helped to prove that acrylic acid-based coatings expressed good haemocompatible properties.

Titanium surface interacting with clot network and entrapped blood components promotes migration and osteogenic differentiation of bone marrow mesenchymal stem cells

Background: A series of biological events was initiated upon the implantation placement, beginning with blood-material contact, followed by coagulation cascade, blood clot formation and bone marrow mesenchymal stromal cells (BMSCs) recruitment. Aim/Hypothesis: The aim of this study was to investigate the effect of implant surface on blood-material interactions and subsequent rBMSCs cellular behaviors via mimicking physiological process in vitro and in vivo. Materials and Methods: This study established in vivo and in vitro to imitate the physiological process of implantation. Titanium slices with sandblasted and double acid-etching (SLA) surface, while polished titanium (PT) surfaces as control group, were incubated with whole blood for 10 min or 2 h, then rBMSCs were seeded. The adhesion, proliferation, migration and differentiation of rBMSCs were studied at specific time points. Titanium implants with different surfaces were implanted into the tibia of Sprague-Dawley (SD) rats and were screwed out at 10 min or 2 h after implantation. The activation of coagulation cascade, platelets and complement system and the clot networks were observed and further quantitatively analyzed. Results: Compared with PT surface, the SLA surface induced the greater and earlier surface-induced blood coagulation cascade and showed more stratified clots network with adsorption of fibrinogen, platelets and CD14 positive cell. Furthermore, increased rBMSCs proliferation as well as the migration and movement of cells were induced by titanium surface pre-incubated with whole blood. Finally, the higher expression levels of the osteogenic-related and angiogenic-related genes showed on SLA surfaces with blood incubation. Conclusions and Clinical Implications: SLA titanium surfaces positively influenced the formed clot structure with entrapped blood components, blood-surface interactions and subsequent cellular biological processes which are important for early bone healing and integration. Acknowledgements: This study was financially supported by Zhejiang Provincial Natural Science Foundation of China under Grant No. LY17H40006, National Natural Science Foundation of China (No. 31670970) and Key Research and Development Program of Science and Technology Department of Zhejiang Province (No. 2019C03081). Keywords: Dental implants, Blood incubation, Bone marrow mesenchymal stromal cells, Osteogenesis

Investigation of the potency of leukodepletion filter membranes immobilized with bovine serum albumin via polydopamine spacer

Conjugation of biomolecules over membrane surfaces intended for blood contacting applications has been proven worthwhile for the improvement of their hemocompatibility. In conjunction with this factuality, this manuscript for the first time unveils the feasibility of bovine serum albumin (BSA) immobilization via polydopamine precursors on electrospun poly(ethylene-co-vinyl alcohol) (EVAL) leukodepletion filter membranes. The successful immobilization of different extents of BSA on EVAL membranes was endorsed by the Attenuated Total Reflectance—Fourier Transform Infrared (ATR-FTIR) Spectrum, variations in the wettability, electron microscopic images revealing the alterations in the fiber diameter and porousness of membranes. An interesting backlash was encountered in the in vitro plasma protein adsorption and in vitro platelet adhesion on the BSA-immobilized membranes as they exhibited a higher protein adsorption and lower platelet adhesion in comparison with neat EVAL. The infiltration of immobilized BSA to the leukodepletion capacity of those membranes was preliminarily studied by in vitro blood-material interactions followed by typical whole blood filtration of selected membranes. The data presented highlight that BSA moieties do not particularly affect the white blood cell (WBC) adhesion and platelet adhesion of EVAL membranes whereas resulted in a significantly higher red blood cell (RBC) recovery and decreased hemolysis under in vitro conditions. Accordingly, BSA-immobilized EVAL membranes were made to asymmetric leukodepletion filters; however, their further evaluation by whole blood filtration ensued that immobilization of BSA could not particularly enhance the overall whole blood leukodepletion efficacy of EVAL membranes.