Blood Coagulation Assays Research Articles

Therapeutic potency of marine collagen/pectin scaffolds - Fabrication, characterization and evaluation

Skin is an important vital organ that must be given proper care and protection from external damage and harmful microbes. If injured, it must be treated with an ideal wound dressing material with potent hemostatic and non-toxic properties. In the present study, fish collagen (FC) was extracted from the fins and tails of Black pomfret (Parastromateus niger). The isolated fish collagen was homogenized with pectin (P) and freeze dried to obtain fish collagen/pectin (FC/P) scaffolds. Scanning electron microscopic analysis showed the porous nature of scaffolds with intermittent holes. UV–Visible and Fourier infrared spectroscopic analyses demonstrated the physicochemical properties of FC/P scaffolds. Hemolytic assay performed using human blood demonstrated the percentage of hemolysis as 0.5 %. In vitro blood clotting assay carried out to determine the hemostatic behaviour displayed the formation of blood clot within 60 s in the presence of FC/P scaffolds. 95 % of cells were viable with the highest concentration of FC/P scaffold used for MTT (3-[4,5-dimethylthiazol-2-yl]-2,5 diphenyl tetrazolium bromide) assay. Scratch wound assay demonstrated complete closure of wound in FC/P scaffold treated cells after 48 h of treatment. Chick embryo chorioallantoic membrane (CAM) assay showed the development of new blood vessels within 6 h of incubation with the FC/P scaffolds, thereby proving their angiogenic potency. These results indicate the potential use of FC/P scaffolds as effective biomaterials for tissue regenerative applications.

Eco-Friendly Synthesis, Characterization, and Biomedical Applications of Biosynthesized Bimetallic Silver-Gold Nanoparticles by Culture Supernatant of Aspergillus niger.

Green synthesis of bimetallic nanoparticles of noble metals is highly desirable in nanomedicine because of their potential use as anticoagulant, thrombolytic and anticancer agents. In this study, it was discovered that the filamentous fungus Aspergillus niger proved effective in producing bimetallic Ag-Au nanoparticles. A. niger culture supernatant was able to produce Ag-AuNPs by reducing the solution of chloroauric acid/silver nitrate (1.0:1.0 mM) within 2 min at 100 °C and pH 8. Experimental Ag-AuNP detection was performed by visually observing the color change to reddish brown. The produced nanoparticles displayed maximal absorbance at 530 nm in UV-vis spectroscopy. According to transmission electron microscopy, most of the nanoparticles were spherical, with a mean diameter of 8-10 nm. The biosynthesis of Ag-AuNPs by A. niger was confirmed by Fourier transform infrared spectroscopy, X-ray diffraction and energy dispersive X-ray analytical techniques. Its zeta potential was discovered to be -34.01 mV. The biosynthesized Ag-AuNPs exhibited effective thrombolytic and antiplatelet aggregation actions by totally preventing and dissolving the blood clot which was verified by microscopic examination, amelioration of blood coagulation assays, and carrageenan-induced tail thrombosis model. The findings verified the effectiveness of biosynthesized Ag-AuNPs as a powerful antitumor agent against HepG2 and A549 cell lines with IC50 values of 15.57 and 27.07 μg/mL, respectively. Crystal violet assay validated the cytopathic effects of Ag-AuNPs on A549 and HepG2 cell lines. Therefore, the produced Ag-AuNPs from A. niger are a promising candidate in the management of thrombosis.

Multifunctional curcumin-based polymer coating: A promising platform against bacteria, inflammation and coagulation

The extensive use of polymers in the medical field has facilitated the development of various devices and implants, contributing to the restoration of organ function. However, despite their advantages such as biocompatibility and robustness, these materials often face challenges like bacterial contamination and subsequent inflammation, leading to implant-associated infections (IAI). Integrating implants effectively is crucial to prevent bacterial colonization and reduce inflammatory responses. To overcome these major issues, surface chemical modifications have been extensively explored. Indeed, click chemistry, and particularly, copper (I)-catalyzed azide-alkyne cycloaddition (CuAAC) reaction has emerged as a promising approach for surface functionalization without affecting material bulk properties. Curcumin, known for its diverse biological activities, suffers from low solubility and stability. To enhance its bioavailability, bioconjugation strategy has garnered attention in recent years. This study represents pioneering work in immobilizing curcumin derivative onto polyethylene terephthalate (PET) surfaces, aiming to combat bacterial adhesion, inflammation and coagulation. Before curcumin derivative bioconjugation, a fluorophore, dansyl derivative, was employed in order to monitor and determine the efficiency of the proposed methodology. Previous surface chemical modifications were required for the immobilization of both dansyl and curcumin derivatives. Ultraviolet-Visible (UV-Vis) demonstrated the amidation functionalization of PET surface. Other surface characterization techniques including X-ray Photoelectron Spectroscopy (XPS), Attenuated Total Reflectance Fourier Transformed Infrared (ATR-FTIR), Scanning Electron Microscopy (SEM) and contact angle, among others, confirmed also the conjugation of both dansyl and curcumin derivatives. On the other hand, different biological assays corroborated that curcumin derivative immobilized PET surfaces do not exhibit cytotoxicity effect. Additionally, corresponding inflammation test were performed, indicating that these polymeric surfaces do not produce inflammation and, when curcumin derivative is immobilized, they decrease the inflammation marker level (IL-6). Moreover, the bacterial growth of both Gram positive and Gram negative bacteria were measured, demonstrating that the immobilization of curcumin derivative on PET provided antibacterial properties to the material. Finally, hemolysis rate analysis and whole blood clotting assay demonstrated the antithrombogenic effect of PET-Cur surfaces as well as no hemolysis concern in the fabricated functional surfaces.

Generation of Rapid and High-Quality Serum by Recombinant Prothrombin Activator Ecarin (RAPClot™).

We recently reported the potential application of recombinant prothrombin activator ecarin (RAPClot™) in blood diagnostics. In a new study, we describe RAPClot™ as an additive to develop a novel blood collection prototype tube that produces the highest quality serum for accurate biochemical analyte determination. The drying process of the RAPClot™ tube generated minimal effect on the enzymatic activity of the prothrombin activator. According to the bioassays of thrombin activity and plasma clotting, γ-radiation (>25 kGy) resulted in a 30-40% loss of the enzymatic activity of the RAPClot™ tubes. However, a visual blood clotting assay revealed that the γ-radiation-sterilized RAPClot™ tubes showed a high capacity for clotting high-dose heparinized blood (8 U/mL) within 5 min. This was confirmed using Thrombelastography (TEG), indicating full clotting efficiency under anticoagulant conditions. The storage of the RAPClot™ tubes at room temperature (RT) for greater than 12 months resulted in the retention of efficient and effective clotting activity for heparinized blood in 342 s. Furthermore, the enzymatic activity of the RAPClot™ tubes sterilized with an electron-beam (EB) was significantly greater than that with γ-radiation. The EB-sterilized RAPClot™ tubes stored at RT for 251 days retained over 70% enzyme activity and clotted the heparinized blood in 340 s after 682 days. Preliminary clinical studies revealed in the two trials that 5 common analytes (K, Glu, lactate dehydrogenase (LD), Fe, and Phos) or 33 analytes determined in the second study in the γ-sterilized RAPClot™ tubes were similar to those in commercial tubes. In conclusion, the findings indicate that the novel RAPClot™ blood collection prototype tube has a significant advantage over current serum or lithium heparin plasma tubes for routine use in measuring biochemical analytes, confirming a promising application of RAPClot™ in clinical medicine.

Wound microenvironment-responsive peptide hydrogel with multifunctionalities for accelerating wound healing.

The fabrication of wound microenvironment-responsive peptide hydrogels with hemostatic ability, antibacterial activity, and wound healing potential remains a challenge. Herein, we constructed a multifunctional dressing by inducing the self-assembly of a peptide (Pep-1) and water-soluble new methylene blue (NMB) through electrostatic interaction. The self-assembly mechanism was demonstrated using a combination of transmission electron microscopy, circular dichroism spectrum, fluorescence spectrum, Zeta potential, and rheological analysis. The Pep-1/NMB hydrogel also exhibited a faster drug release rate in wound acidic environment. Furthermore, when Pep-1/NMB was exposed to a 635 nm laser, its antibacterial ratios increased sharply to 95.3%, indicating remarkably improved antibacterial effects. The findings from the blood coagulation and hemostasis assay indicated that Pep-1/NMB effectively enhanced the speed of blood clotting in vitro and efficiently controlled hemorrhage in a mouse liver hemorrhage model. Meanwhile, hemolytic and cytotoxicity evaluation revealed that the hydrogel had excellent hemocompatibility and cytocompatibility. Finally, the findings from the wound healing studies and H&E staining indicated that the Pep-1/NMB hydrogel had a significant impact on cell migration and wound repair. The results indicated that wound microenvironment-responsive Pep-1/NMB hydrogel had significant potential as a highly effective wound dressing platform, offering rapid hemostasis, antibacterial, and wound healing acceleration properties.

Effect of Surface Chemistry on Hemolysis, Thrombogenicity, and Toxicity of Carbon Nanotube Doped Thermally Sprayed Hydroxyapatite Implants.

Assessing blood compatibility is crucial before in vivo procedures and is considered more reliable than many in vitro tests. This study examines the physiochemical properties and blood compatibility of bioactive powders ((0.5-2 wt % carbon nanotube (CNT)/alumina)-20 wt %)) produced through a heterocoagulation colloidal technique followed by ball milling with hydroxyapatite (HAp). The 1 wt % CNT composite demonstrated a surface charge ∼5 times higher than HAp at pH 7.4, with a value of -11 mV compared to -2 mV. This increase in electrostatic charge is desirable for achieving hemocompatibility, as evidenced by a range of blood compatibility assessments, including hemolysis, blood clotting, platelet adhesion, platelet activation, and coagulation assays (prothrombin time (PT) and activated partial thrombin time (aPTT)). The 1 wt % CNT composite exhibited hemolysis ranging from 2 to 7%, indicating its hemocompatibility. In the blood clot investigation, the absorbance values for 1-2 wt % CNT samples were 0.927 ± 0.038 and 1.184 ± 0.128, respectively, indicating their nonthrombogenicity. Additionally, the percentage of platelet adhered on the 1 wt % CNT sample (∼5.67%) showed a ∼2.5-fold decrement compared to the clinically used negative control, polypropylene (∼13.73%). The PT and aPTT experiments showed no difference in the coagulation time for CNT samples even at higher concentrations, unlike HAC2 (80 mg). In conclusion, the 1 wt % CNT sample was nontoxic to human blood, making it more hemocompatible, nonhemolytic, and nonthrombogenic than other samples. This reliable study reduces the need for additional in vitro and in vivo studies before clinical trials, saving time and cost.

Unravelling the impact of COVID-19 on pregnancy: In aspect of placental histopathology and umbilical cord macrophage immunoactivity with neonatal outcomes

COVID-19 has turned into a global pandemic since it was first detected in 2019, causing serious public health problems. Our objective was to investigate the impact of COVID-19 on pregnant women and newborns, who belong to the vulnerable segments of society. Our study involved the histopathological examination of placentas and umbilical cords from two groups of pregnant women. Group I consisted of pregnant women who had never tested positive for COVID-19 during their pregnancy (n: 20). Group II consisted of pregnant women who had contracted COVID-19, exhibited moderate and mild symptoms, and recovered from the disease before giving birth (n: 23). Furthermore, we employed immunofluorescence techniques to detect macrophage activity in the umbilical cord. Prenatal assessments were based on maternal complete blood counts and coagulation assays (n:40 in both groups). Newborn conditions were evaluated using birth weight, height, head circumference, and APGAR (n:40 in both groups). Our analyses reveal that COVID-19 causes placental and umbilical cord inflammation and maternal and foetal vascular malperfussion. Our immunofluorescence investigations demonstrate a notable increase in macrophage numbers and the macrophage-to-total cell ratio within the COVID-19 group. In this aspect, this study provides the initial report incorporating macrophage activity results from Warton's jelly in pregnants who have recovered from COVID-19. We have also ascertained that COVID-19 abbreviates gestation periods and concurrently diminishes maternal haemoglobin concentrations. Consequently, COVID-19 with mild and moderate symptoms during pregnancy, causes significant changes to the placenta and umbilical cord, but propitiously does not cause a significant difference in the neonatal outcomes.

Preparation and Modification of Collagen/Sodium Alginate-Based Biomedical Materials and Their Characteristics.

(1) Background: Collagen and sodium alginate are commonly used in the field of biomedical materials due to their excellent biocompatibility. This study focuses on the preparation, modification, and characterization of collagen/sodium alginate (C/SA)-based biomedical materials. (2) Methods: The characteristics, including surface chemistry, mechanical properties, hygroscopicity, and porosity, were analyzed. The hemostatic activity in vitro was measured using a blood clotting assay and dynamic blood clotting assay. (3) Results: The results from microstructure and porosity measurement revealed that all of the sponges exhibited a porosity of more than 95 percent. The sponge cross-linked with 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide/N-hydroxysuccinimide (EDC/NHS) showed better tensile strength and lower elongation at break. The sponges cross-linked with EDC/NHS and oxidized sodium alginate (OSA) exhibited the highest hygroscopicity in comparison with the uncross-linked sponge. (4) Conclusions: Our study demonstrated that the C/SA-based material we prepared exhibited a high level of porosity, enabling efficient absorption of tissue exudate and blood. Additionally, the materials revealed excellent hemocompatibility, making them suitable for use as a hemostatic dressing in the field of biomedical materials.

PDGF-AA loaded photo-crosslinked chitosan-based hydrogel for promoting wound healing

Chitosan-based hydrogels are considered to be ideal materials for promoting wound healing due to their nontoxic, biodegradable, and biocompatible properties. However, the weak mechanical strength, hemostatic properties, and adhesive properties of chitosan hydrogels limit their potential applications. In this study, we synthesized methacrylimide-chitosan (MAC)-4-arm polyethylene glycol (PEG)-dopamine (DMA) (MAC-PEG-DMA) hybrid hydrogels containing A-chain homodimers of platelet-derived growth factor (PDGF-AA) through one-pot photo-crosslinking. The resulting hydrogel exhibited improved mechanical strength and hemostatic properties as demonstrated by both in vitro blood clotting assay and rat liver hemorrhage assay. Furthermore, The PDGF-AA loaded hydrogel was also able to accelerate cell migration and proliferation. Data from skin wounds treated with this hybrid hydrogel showed faster wound closure and collagen maturation. Therefore, MAC-PEG-DMA (PDGF-AA) has great potential as a dressing to promote wound healing.

Haemostatic potency of sodium alginate/aloe vera/sericin composite scaffolds – preparation, characterisation, and evaluation

Fabrication of haemostatic materials with excellent antimicrobial, biocompatible and biodegradable properties remains as a major challenge in the field of medicine. Haemostatic agents play vital role in protecting patients and military individuals during emergency situations. Natural polymers serve as promising materials for fabricating haemostatic compounds due to their efficacy in promoting hemostasis and wound healing. In the present work, sodium alginate/aloe vera/sericin (SA/AV/S) scaffold has been fabricated using a simple cost-effective casting method. The prepared SA/AV/S scaffolds were characterised for their physicochemical properties such as scanning electron microscope, UV–visible spectroscopy and Fourier transform infra-red spectroscopy. SA/AV/S scaffold showed good mechanical strength, swelling behaviour and antibacterial activity. In vitro experiments using erythrocytes proved the hemocompatible and biocompatible features of SA/AV/S scaffold. In vitro blood clotting assay performed using human blood demonstrated the haemostatic and blood absorption properties of SA/AV/S scaffold. Scratch wound assay was performed to study the wound healing efficacy of prepared scaffolds. Chick embryo chorioallantoic membrane assay carried out using fertilised embryos proved the angiogenic property of SA/AV/S scaffold. Thus, SA/AV/S scaffold could serve as a potential haemostatic healthcare product due to its outstanding haemostatic, antimicrobial, hemocompatible, biocompatible and angiogenic properties.

Thrombolytic and anticoagulant efficiencies of purified fibrinolytic enzyme produced from Cochliobolus hawaiiensis under solid-state fermentation.

Cochliobolus hawaiiensis Alcorn Assiut University Mycological Centre 8606 was chosen from the screened 20 fungal species as the potent producer of fibrinolytic enzyme on skimmed-milk agar plates. The greatest enzyme yield was attained when the submerged fermentation (SmF) conditions were optimized, and it was around (39.7U/mg protein). Moreover, upon optimization of fibrinolytic enzyme production under solid-state fermentation (SSF), the maximum productivity of fibrinolytic enzyme was greatly increased recorded a bout (405U/mg protein) on sugarcane bagasse, incubation period of 5 days, moisture level of 100%, initial pH of salt basal medium 7.8, incubation temperature at 35°C, and supplementation of the salt basal medium with corn steep liquor (80％, v/v). The yield of fibrinolytic enzyme by C. hawaiiensis under SSF was higher than that of SmF with about 10.20-fold. The purification procedures of fibrinolytic enzyme by ammonium sulfate (70%), gel filtration, and ion-exchange columns chromatography caused a great increase in its specific activity to 2581.6U/mg protein with an overall yield of 55.89%, 6.37 purification fold and molecular weight of 35kDa. Maximal activity was recorded at pH 7 and 37°C. Significant pH stability was recorded at pH 6.6-7.2, and thermal stability was recorded at 33-41°C. The enzyme showed the highest affinity toward fibrin, with Vmax of 240U/mL and an apparent Km value of 47.61mmol. Mg2+ and Ca2+ moderately induced fibrinolytic activity, whereas Cu2+ and Zn2+ greatly suppressed the enzyme activity. The produced enzyme is categorized as serine protease and non-metalloprotease. The purified fibrinolytic enzyme showed efficient thrombolytic and antiplatelet aggregation activities by completely prevention and dissolution of the blood clot which confirmed by microscopic examination and amelioration of blood coagulation assays. These findings suggested that the produced fibrinolytic enzyme is a promising agent in management of blood coagulation disorders.

Strong tissue adhesive polyelectrolyte complex powders based on low molecular weight chitosan for acute hemorrhage control

Self-gelling and bioadhesive powders offered promising effective hemostats to suit irregularly shaped, complex and non-compressible wounds for clinical applications. In the current study, chitosan based polyelectrolyte complex coacervate were simply prepared by mixing high concentrations (10 %) of low molecular weight chitosan (CS) and polyacrylic acid (PAA) solutions. Obtained by lyophilization, the physical cross-linked polyelectrolyte complex powders would form a gel within 5 s upon hydration, which demonstrated excellent mechanical properties, significant antibacterial activities, strong and lasting adhesion on wet tissues in physiological environment. In vitro blood clotting assays showed that the CS/PAA powders could remarkably aggregate blood cells and accelerate blood clotting process. As studied by diverse hemorrhage models, including rat tail, liver and heart injuries and dog incision, CS/PAA powders significantly facilitated the decrease of blood loss as well as hemostatic time by creating robust physical barriers and promoting blood clot formation on the bleeding sites. These outstanding properties in terms of easy preparation, rapid self-gelling, strong wet adhesion, effective hemostasis and shape-adaptability endowed CS/PAA polyelectrolyte complex powders with great potential in managing acute hemorrhage of non-compressible trauma.

Study on the safety and effectiveness of low-dose vs. regular-dose fondaparinux in preventing venous thromboembolism prophylaxis following total knee arthroplasty.

This study aims to evaluate the effectiveness and safety of low-dose (1.5 mg) fondaparinux for venous thromboembolism (VTE) prophylaxis in patients post-total knee arthroplasty (TKA). We retrospectively identified 314 patients who carried out the primary TKAs and received fondaparinux for VTE chemoprophylaxis between July 2020 and December 2021. A total of 141 TKA patients were excluded according to the exclusion criteria. Two groups of patients were established: the low-dose group included 84 patients who injected 1.5 mg of fondaparinux, and the regular-dose group included 89 patients who injected 2.5 mg of fondaparinux. The pre-operative blood analysis and coagulation assays were performed. The surgical time, the incidence of symptomatic VET, blood loss, wound complication, bleeding, drainage, and mortality of patients were determined and assessed. The pre-operative blood analysis, body mass index, sex, age, and coagulation assays of patients in both groups were comparable. In terms of symptomatic pulmonary embolism and deep vein thrombosis, there was no significant difference (variation) between the two groups. However, patients in both groups showed a substantial difference in terms of blood loss, drain volume, wound complication, and transfusion rate. In prevention of VET in patients post-TKA, low-dose fondaparin is as effective as conventional dose fondaparinux. A significant decrease in blood loss, post-surgical transfusion rates, and wound complications were detected in patients given low-dose fondaparinux compared to those receiving regular-dose fondaparinux.

Synthesis and characterization of new biomaterial ZnMg doped HAp for orthopaedic implant

The present study illustrates the doping of Zn and Mg in the HAp matrix synthesized using sol-gel process. The addition of two vital metal ions in HAp enhances both mechanical and biocompatibility of the HAp. The present investigation focuses on how ZnMg doping affects the phase, its morphology, shifting of the functional groups, mechanical, corrosion resistance, and dielectric properties. The Ca/P ratio was maintained between 1.60 and 1.63 as confirmed from EDS analysis. The clotting behaviour was studied using whole blood clotting assay method. The XRD and Raman spectra were used to determine different compound formation. The grain size increases after adding the Zn/Mg as observed from FESEM. However, the crystallite size decreases as calculated from XRD. Therefore, hardness increases after the addition of ZnMg in HAp. The ECA study in Ringer solution showed that addition of two different metals Zn & Mg in HAp improves the corrosion resistance. The impedance studies showed doped sample ZnMg/HAp has more polarization resistance compared to pure HAp and hence has more corrosion resistance. Moderate clotting behaviour was observed for this doped sample as well.

Benzeneboronic−alginate/quaternized chitosan−catechol powder with rapid self-gelation, wet adhesion, biodegradation and antibacterial activity for non-compressible hemorrhage control

Although hemostatic powders have excellent adaptability for irregular and inaccessible wounds, their hemostasis for continuous bleeding or bleeding wounds of non-compressible organs remains a critical challenge. Herein, a series of benzeneboronic acid-modified sodium alginate/catechol-modified quaternized chitosan (SA-BA/QCS-C, SBQCC) powders is developed by borate ester crosslinking for non-compressible hemorrhage control. SBQCC powders possess remarkable tissue adhesion, rapid self-gelation, good cytocompatibility and antibacterial activity against S. aureus and E. coil. The blood coagulation assays show that SBQCC powders display excellent blood clotting ability due to the synergistic effect of SA-BA and QCS-C. The SBQCC2 powder with the SA-BA to QCS-C mass ratio of 5 to 3 has the greatest effect on the blood-clotting rate. Upon depositing SBQCC2 powder to bleeding wounds of rabbit liver, the powder can absorb a large amount of blood and form a stable hydrogel physical barrier at the bleeding wounds in situ to achieve non-pressing rapid hemostasis. The SBQCC2 powder also has good biocompatibility and can be degraded in vivo. Altogether, the SBQCC powders can be a promising candidate for rapid hemostasis, and these findings may provide a new perspective for improving the hemostatic efficiency of the hemostatic powder in biomedical fields.

Hemostatic effects of FmocF-ADP hydrogel consisted of Fmoc-Phenylalanine and ADP.

During trauma and surgery, bleeding is a major concern. One of the crucial strategies for hemostasis is the use of biological hemostatic material. Herein, we reported an amino acid-based hydrogel FmocF-ADP hydrogel, which consisted of N-[(9H-fluoren-9-ylmethoxy) carbonyl]-3-phenyl-L-alanine (FmocF) and adenosine diphosphate (ADP) sodium solution. The hydrogel was created by FmocF self-assembling to nanofiber in ADP sodium solution and then cross-linking to hydrogel. FmocF-ADP hydrogel showed good in vitro coagulation activity as measured by whole blood clotting assays, platelet clotting assays, platelet activation assays, and platelet adhesion assays. Further, it was noted to reveal an exceptional in vivo hemostatic effect in a mouse liver bleeding model. Together with the previous report of the good biocompatibility and antimicrobial activity of FmocF hydrogel, our study would extend the biomedical application of FmocF hydrogel. In conclusion, the present study would provide a constructive strategy for the development of new antimicrobial and hemostatic materials or develop a potential hemostatic material.

Synthesis and characterization of mussel-inspired nanocomposites based on dopamine–chitosan–iron oxide for wound healing: In vitro study

There are many challenges faced the soft tissue adhesives in the medical application field. For example, there is a limited effective binding between the medical adhesive and different types of soft tissues. Chitosan (CS) and dopamine (DA) were used as structural units for synthesizing nanocomposites utilized as a wet tissue adhesive. To produce dopamine–chitosan–iron oxide nanocomposites (DA–CS–Fe3O4 NCs), DA was loaded onto chitosan–iron oxide nanocomposites. The nanocomposites have been prepared using ionic gelation method under vigorous homogenization and characterized by different techniques. Fourier-transform infrared spectroscopy (FTIR) have shown that DA–CS– Fe3O4 NCs could attach to the tissue through two possible functional groups, namely, the catechol and amine groups. The results of in vitro scratch wound-healing assay suggested that the prepared DA–CS– Fe3O4 NCs facilitate cell migration (the wound-closure percentage reached 96% at 72 h). All experimental results confirm that DA–CS– Fe3O4 NCs are strongly recommended for use as a soft medical tissue adhesive in wound healing and surgeries such as vascular surgery. In addition, the results of the whole blood clotting, antibacterial assessment, live and dead assay, cytotoxicity test, and wound-healing assay indicate that DA-CS–Fe3O4 NCs can be used as a multifunctional biomedical adhesive.

Light-Activated Modified Arginine Carbon Dots as Antibacterial Particles

Nitrogen-doped arginine carbon dots (Arg CDs) as light-sensitive antibacterial agents were prepared by using citric acid as the carbon source and arginine amino acid as the nitrogen source via a microwave-assisted synthesis method. Dynamic light scattering (DLS) measurements and TEM images revealed that the Arg CDs were in the 1–10 nm size range with a graphitic structure. To improve their antibacterial capability, the Arg CDs were modified with ethyleneimine (EDA), pentaethylenehexamine (PEHA), and polyethyleneimine (PEI) as different amine sources, and the zeta potential value of +2.8 ± 0.6 mV for Arg CDs was increased to +34.4 ± 4.1 mV for PEI-modified Arg CDs. The fluorescence intensity of the Arg CDs was significantly enhanced after the modification with EDA, and the highest antibacterial effect was observed for the PEI-modified Arg CDs. Furthermore, the photodynamic antibacterial capacity of bare and EDA-modified Arg CDs was determined upon light exposure to show their light-induced antibacterial effects. Photoexcited (315–400 nm, UVA, 300 W), EDA-modified Arg CDs at 5 mg/mL concentration were found to inhibit about 49 ± 7% of pathogenic bacteria, e.g., Escherichia coli, with 5 min of light exposure. Furthermore, the biocompatibilities of the bare and modified Arg CDs were also investigated with blood compatibility tests via hemolysis and blood clotting assays and cytotoxicity analysis on L929 fibroblast cells.

A novel composition of bioactive glass with potent haemostatic action and antibacterial competence

Haemorrhagic bleeding is a crucial area of concern related to military as well as civilian trauma. In recent years, bioactive glass is gaining attention in a number of healthcare applications, including haemostasis. Herewith, we report a unique composition of bioactive glass, 70 SiO2: (30-x-y) CaO: x.Al2O3: y.ZnO, where x = 10–18 mole% and y = 0–8 mole%, (Al-BAG) exhibiting haemostatic property as well as antibacterial activity. The as-prepared glass was characterized using XRD, SEM-EDX, FTIR and TG-DSC along with in-vitro degradation study and biological studies e.g., cytocompatibility, haemocompatibility, in-vitro thrombus formation, in-vitro blood absorption capacity, blood coagulation assays (PT, aPTT), in-vitro antibacterial assay against Staph. aureus as well as in-vivo acute dermal toxicity followed by histopathological analysis) and in-vivo haemostasis efficacy were undertaken. The novel bioactive glass composition exhibits promises to be an efficient haemostatic agent with antibacterial activity.

Collateral damage: Anticoagulant rodenticides pose threats to California condors

Anticoagulant rodenticides (ARs) are widespread environmental contaminants that pose risks to scavenging birds because they routinely occur within their prey and can cause secondary poisoning. However, little is known about AR exposure in one of the rarest avian scavengers in the world, the California condor (Gymnogyps californianus). We assessed AR exposure in California condors and surrogate turkey vultures (Cathartes aura) to gauge potential hazard to a proposed future condor flock by determining how application rate and environmental factors influence exposure. Additionally, we examined whether ARs might be correlated with prolonged blood clotting time and potential mortality in condors. Only second-generation ARs (SGARs) were detected, and exposure was detected in all condor flocks. Liver AR residues were detected in 42% of the condors (27 of 65) and 93% of the turkey vultures (66 of 71). Although concentrations were generally low (<10 ng/g ww), 48% of the California condors and 64% of the turkey vultures exposed to ARs exceeded the 5% probability of exhibiting signs of toxicosis (>20 ng/g ww), and 10% and 13% exceeded the 20% probability of exhibiting signs toxicosis (>80 ng/g ww). There was evidence of prolonged blood clotting time in 16% of the free-flying condors. For condors, there was a relationship between the interaction of AR exposure index (legal use across regions where condors existed) and precipitation, and the probability of detecting ARs in liver. Exposure to ARs may complicate recovery efforts of condor populations within their current range and in the soon to be established northern California experimental population. Continued monitoring of AR exposure using plasma blood clotting assays and residue analysis would allow for an improved understanding of their hazard to condors, particularly if paired with recent movement data that could elucidate exposure sources on the landscape occupied by this endangered species.