Block Copolymer Nanoparticles Research Articles

Arginine-Functional Methacrylic Block Copolymer Nanoparticles: Synthesis, Characterization, and Adsorption onto a Model Planar Substrate.

Recently, we reported the synthesis of a hydrophilic aldehyde-functional methacrylic polymer (Angew. Chem., 2021, 60, 12032-12037). Herein we demonstrate that such polymers can be reacted with arginine in aqueous solution to produce arginine-functional methacrylic polymers without recourse to protecting group chemistry. Careful control of the solution pH is essential to ensure regioselective imine bond formation; subsequent reductive amination leads to a hydrolytically stable amide linkage. This new protocol was used to prepare a series of arginine-functionalized diblock copolymer nanoparticles of varying size via polymerization-induced self-assembly in aqueous media. Adsorption of these cationic nanoparticles onto silica was monitored using a quartz crystal microbalance. Strong electrostatic adsorption occurred at pH 7 (Γ = 14.7 mg m-2), whereas much weaker adsorption occurred at pH 3 (Γ = 1.9 mg m-2). These findings were corroborated by electron microscopy, which indicated a surface coverage of 42% at pH 7 but only 5% at pH 3.

Grafting Block Copolymer Nanoparticles to a Surface via Aqueous Photoinduced Polymerization-induced Self-Assembly at Room Temperature.

The creation of well-defined surface nanostructures is important for a diverse set of applications such as cell adhesion, superhydrophobic coating, and lithography. In this study, we describe a robust bottom-up method for surface functionalization that involves surface-initiated reversible deactivation radical polymerization (RDRP) and the grafting of block copolymer nanoparticles to material surfaces via aqueous photoinduced polymerization-induced self-assembly (photo-PISA) at room temperature. Using silica nanoparticles as a model substrate, colloidal mesoscale hybrid assemblies with various morphologies were successfully prepared. The morphologies can be easily tuned by changing the lengths of macromolecular chain transfer agents and parameters of the silica nanoparticles. The surface-initiated photo-PISA approach can also be employed for other large-scale substrates such as silicon wafer. Taking advantage of mild reaction conditions of this method (room temperature, aqueous medium, and visible light), enzymatic deoxygenation was introduced to develop oxygen-tolerant surface-initiated photo-PISA that can fabricate well-defined nanostructures on large-scale substrates under open-to-air conditions.

Controlling the Formation of Polyhedral Block Copolymer Nanoparticles: Insights from Process Variables and Dynamic Modeling.

This study delves into the formation of nanoscale polyhedral block copolymer particles (PBCPs) exhibiting cubic, octahedral, and variant geometries. These structures represent a pioneering class that has never been fabricated previously. PBCP features distinct variations in curvature on the outer surface, aligning with the edges and corners of polyhedral shapes. This characteristic sharply contrasts with previous block copolymers (BCPs), which displayed a smooth spherical surface. The emergence of these cornered morphologies presents an intriguing and counterintuitive phenomenon and is linked to process parameters, such as evaporation rates and initial concentration, while keeping other variables constant. Using a system of coupled Cahn-Hillard (CCH) equations, we uncover the mechanisms driving polyhedral particle formation, emphasizing the importance of controlling relaxation parameters for shape variable u and microphase separation v. This unconventional approach, differing from traditional steepest descent method, allows for precise control and diverse polyhedral particle generation. Accelerating the shape variable u proves crucial for expediting precipitation and aligns with experimental observations. Employing the above theoretical model, we achieve shape predictions for particles and the microphase separation within them, which overcomes the limitations of ab initio computations. Additionally, a numerical stability analysis discerns the transient nature versus local minimizer characteristics. Overall, our findings contribute to understanding the complex interplay between process variables and the morphology of polyhedral BCP nanoparticles.

Hybrid Photoiniferter and Ring-Opening Polymerization Yields One-Pot Anisotropic Nanorods.

Polymerization-induced self-assembly (PISA) has emerged as a scalable one-pot technique to prepare block copolymer nanoparticles. Recently, we developed a PISA process that resulted in poly(L-lactide)-b-poly(ethylene glycol) block copolymer nanoparticles coined ring-opening polymerization-induced crystallization-driven self-assembly (ROPI-CDSA). The resulting nanorods demonstrated a strong propensity for aggregation, resulting in the formation of 2D sheets and 3D networks. Here, we report the synthesis of poly(N,N-dimethyl acrylamide)-b-poly(L)-lactide block copolymer nanoparticles by ROPI-CDSA utilizing a two-step, one-pot approach. A dual-functionalized photoiniferter was first used for controlled radical polymerization of the acrylamido-based monomer, and the resulting polymer served as a macroinitiator for organocatalyzed ring-opening polymerization to form the solvophobic polyester block. The resulting nanorods are highly stable and display anisotropy at higher molecular weights (>12k Da) and concentrations (>20% solids) than our previous report. This development expands the chemical scope of ROPI-CDSA block copolymers and provides readily accessible nanorods made with biocompatible materials. This article is protected by copyright. All rights reserved.

Mechanism of Action and Design of Potent Antibacterial Block Copolymer Nanoparticles.

Self-assembled polymer nanoparticles are promising antibacterials, with nonspherical morphologies of particular interest as recent work has demonstrated enhanced antibacterial activity relative to their spherical counterparts. However, the reasons for this enhancement are currently unclear. We have performed a multifaceted analysis of the antibacterial mechanism of action of 1D nanofibers relative to nanospheres by the use of flow cytometry, high-resolution microscopy, and evaluations of the antibacterial activity of pristine and tetracycline-loaded nanoparticles. Low-length dispersity, fluorescent diblock copolymer nanofibers with a crystalline poly(fluorenetrimethylenecarbonate) (PFTMC) core (length = 104 and 472 nm, height = 7 nm, width = 10-13 nm) and a partially protonated poly(dimethylaminoethyl methacrylate) (PDMAEMA) corona (length = 12 nm) were prepared via seeded growth living crystallization-driven self-assembly. Their behavior was compared to that of analogous nanospheres containing an amorphous PFTMC core (diameter of 12 nm). While all nanoparticles were uptaken into Escherichia coli W3110, crystalline-core nanofibers were observed to cause significant bacterial damage. Drug loading studies indicated that while all nanoparticle antibacterial activity was enhanced in combination with tetracycline, the enhancement was especially prominent when small nanoparticles (ca. 15-25 nm) were employed. Therefore, the identified differences in the mechanism of action and the demonstrated consequences for nanoparticle size and morphology control may be exploited for the future design of potent antibacterial agents for overcoming antibacterial resistance. This study also reinforces the requirement of morphological control over polymer nanoparticles for biomedical applications, as differences in activity are observed depending on their size, shape, and core-crystallinity.

Degradable Block Copolymer Nanoparticles Synthesized by Polymerization-Induced Self-Assembly.

Polymerization-induced self-assembly (PISA) combines polymerization and in situ self-assembly of block copolymers in one system and has become a widely used method to prepare block copolymer nanoparticles at high concentrations. The persistence of polymers in the environment poses a huge threat to the ecosystem and represents a significant waste of resources. There is an urgent need to develop novel chemical approaches to synthesize degradable polymers. To meet with this demand, it is crucial to install degradability into PISA nanoparticles. Most recently, degradable PISA nanoparticles have been synthesized by introducing degradation mechanisms into either shell-forming or core-forming blocks. This Minireview summarizes the development in degradable block copolymer nanoparticles synthesized by PISA, including shell-degradable, core-degradable, and all-degradable nanoparticles. Future development will benefit from expansion of polymerization techniques with new degradation mechanisms and adaptation of high-throughput approaches for both PISA syntheses and degradation studies.

Degradable Block Copolymer Nanoparticles Synthesized by Polymerization‐Induced Self‐Assembly

AbstractPolymerization‐induced self‐assembly (PISA) combines polymerization and in situ self‐assembly of block copolymers in one system and has become a widely used method to prepare block copolymer nanoparticles at high concentrations. The persistence of polymers in the environment poses a huge threat to the ecosystem and represents a significant waste of resources. There is an urgent need to develop novel chemical approaches to synthesize degradable polymers. To meet with this demand, it is crucial to install degradability into PISA nanoparticles. Most recently, degradable PISA nanoparticles have been synthesized by introducing degradation mechanisms into either shell‐forming or core‐forming blocks. This Minireview summarizes the development in degradable block copolymer nanoparticles synthesized by PISA, including shell‐degradable, core‐degradable, and all‐degradable nanoparticles. Future development will benefit from expansion of polymerization techniques with new degradation mechanisms and adaptation of high‐throughput approaches for both PISA syntheses and degradation studies.

Block copolymer synthesis in ionic liquid via polymerisation-induced self-assembly: a convenient route to gel electrolytes.

We report for the first time a reversible addition-fragmentation chain transfer polymerisation-induced self-assembly (RAFT-PISA) formulation in ionic liquid (IL) that yields worm gels. A series of poly(2-hydroxyethyl methacrylate)-b-poly(benzyl methacrylate) (PHEMA-b-PBzMA) block copolymer nanoparticles were synthesised via RAFT dispersion polymerisation of benzyl methacrylate in the hydrophilic IL 1-ethyl-3-methyl imidazolium dicyanamide, [EMIM][DCA]. This RAFT-PISA formulation can be controlled to afford spherical, worm-like and vesicular nano-objects, with free-standing gels being obtained over a broad range of PBzMA core-forming degrees of polymerisation (DPs). High monomer conversions (≥96%) were obtained within 2 hours for all PISA syntheses as determined by 1H NMR spectroscopy, and good control over molar mass was confirmed by gel permeation chromatography (GPC). Nanoparticle morphologies were identified using small-angle X-ray scattering (SAXS) and transmission electron microscopy (TEM), and further detailed characterisation was conducted to monitor rheological, electrochemical and thermal characteristics of the nanoparticle dispersions to assess their potential in future electronic applications. Most importantly, this new PISA formulation in IL facilitates the in situ formation of worm ionogel electrolyte materials at copolymer concentrations >4% w/w via efficient and convenient synthesis routes without the need for organic co-solvents or post-polymerisation processing/purification. Moreover, we demonstrate that the worm ionogels developed in this work exhibit comparable electrochemical properties and thermal stability to that of the IL alone, showcasing their potential as gel electrolytes.

Polymerization-induced self-assembly of (2-(4-vinylbenzyl)iso-indoline-1,3-dione) for the synthesis of hydrazine responsive block copolymer nanoparticles

Hydrazine-responsive block copolymer nanoparticles with a phthalimide core are synthesized via reversible addition–fragmentation chain transfer (RAFT)-mediated dispersion polymerization-induced self-assembly.

Effects of stirring rate on morphology of aqueous RAFT emulsion PISA-derived block copolymer nanoparticles

The influence of stirring rate on nanoparticle morphology in aqueous RAFT emulsion PISA has been investigated.

The effect of comb length on the in vitro and in vivo properties of self-assembled poly(oligoethylene glycol methacrylate)-based block copolymer nanoparticles.

Comb copolymer analogues of poly(lactic acid)-polyethylene glycol block copolymers (PLA-b-PEG) offer potential to overcome the inherent chemistry and stability limitations of their linear block copolymer counterparts. Herein, we examine the differences between P(L)LA10K-b-PEG10K and linear-comb copolymer analogues thereof in which the linear PEG block is replaced by poly(oligo(ethylene glycol) methacrylate) (POEGMA) blocks with different side chain (comb) lengths but the same overall molecular weight. P(L)LA10K-b-POEGMA47510K and P(L)LA10K-b-POEGMA200010K block copolymers were synthesized via activators regenerated by electron transfer atom transfer radical polymerization (ARGET ATRP) and fabricated into self-assembled nanoparticles using flash nanoprecipitation via confined impinging jet mixing. Linear-comb copolymer analogues based on PLA-b-POEGMA yielded smaller but still well-controlled nanoparticle sizes (88 ± 2 nm and 114 ± 1 nm respectively compared to 159 ± 2 nm for P(L)LA10K-b-PEG10K nanoparticles) that exhibited improved colloidal stability relative to linear copolymer-based nanoparticles over a 15 day incubation period while maintaining comparably high cytocompatibility, although the comb copolymer analogues had somewhat lower loading capacity for doxorubicin hydrochloride. Cell spheroid studies showed that the linear-comb copolymers promoted enhanced tumor transport and thus cell killing compared to conventional linear block copolymers. In vivo studies showed all NP types could passively accumulate within implanted CT26 tumors but with different accumulation profiles, with P(L)LA10K-b-POEGMA200010K NPs showing continuous accumulation throughout the full 24 h monitoring period whereas tumor accumulation of P(L)LA10K-b-POEGMA47510K NPs was significant only between 8 h and 24 h. Overall, the linear-comb copolymer analogues exhibited superior stability, biodistribution, spheroid penetration, and inherent tunability over linear NP counterparts.

Exploiting the Monomer-Feeding Mechanism of RAFT Emulsion Polymerization for Polymerization-Induced Self-Assembly of Asymmetric Divinyl Monomers.

We exploited the monomer-feeding mechanism of reversible addition-fragmentation chain transfer (RAFT) emulsion polymerization to achieve the successful polymerization-induced self-assembly (PISA) of asymmetric divinyl monomers. Colloidally stable cross-linked block copolymer nanoparticles with various morphologies, such as vesicles, were directly prepared at high solids. Morphologies of the cross-linked block copolymer nanoparticles could be controlled by varying the monomer concentration, degree of polymerization (DP) of the core-forming block, and length of the macro-RAFT agent. X-ray photoelectron spectroscopy (XPS) characterization confirmed the presence of unreacted vinyl groups within the obtained block copolymer nanoparticles, providing a landscape for further functionalization via thiol-ene chemistry. Finally, the obtained block copolymer nanoparticles were employed as additives to tune the mechanical properties of hydrogels. We expect that this study not only offers considerable opportunities for the preparation of well-defined cross-linked block copolymer nanoparticles, but also provides important insights into the controlled polymerization of multivinyl monomers.

Ectoenzymes as promising cell identification structures for the high avidity targeting of polymeric nanoparticles

Pharmacotherapy is often limited by undesired side effects while insufficient drug reaches the site of action. Active-targeted nanotherapy should provide a solution for this problem, by using ligands in the nanoparticle corona for the identification of receptors on the target-cell surface. However, since receptor binding is directly associated with pharmacological responses, today's targeting concepts must be critically evaluated. We hypothesized that addressing ectoenzymes would help to overcome this problem, but it was not clear if particles would show sufficiently high avidity to provide us with a viable alternative to classical ligand-receptor concepts. We scrutinized this aspect by immobilizing the highly selective angiotensin-converting enzyme 2 (ACE2) inhibitor MLN-4760 in the corona of block-copolymer nanoparticles and investigated enzyme binding via microscale thermophoresis and flow cytometry. Excellent avidities with Kd values as low as 243 pM for soluble ACE2 and 306 pM for ACE2-positive cells were obtained. In addition, the inhibitory activity had an IC50 value of 2.88 nM. Reliable target cell identification could be proven in coculture experiments. High avidity is the basis for minimizing material loss to off-target sites and paves the way for a paradigm shift in nanoparticle targeting which does not trigger unintended side effects following target cell identification.

Interfacial Supra-Assembly of Copolymer Nanoparticles Enables the Formation of Nanocomposite Crystals with a Tunable Internal Structure.

It is highly desirable but technically challenging to precisely control the spatial composition and internal structure of crystalline nanocomposite materials, especially in a one-pot synthetic route. Herein, we demonstrate a versatile pathway to tune the spatial distribution of guest species within a host inorganic crystal via an incorporation strategy. Specifically, well-defined block copolymer nanoparticles, poly(methacrylic acid)x-block-poly(styrene-alt-N-phenylmaleimide)y [PMAAx-P(St-alt-NMI)y], are synthesized by polymerization-induced self-assembly. Such anionic nanoparticles can supra-assemble onto the surface of larger cationic nanoparticles via an electrostatic interaction, forming colloidal nanocomposite particles (CNPs). Remarkably, such CNPs can be incorporated into calcite single crystals in a spatially controlled manner: the depth of CNPs incorporation into calcite is tunable. Systematic investigation indicates that this interesting phenomenon is governed by the colloidal stability of CNPs, which in turn is dictated by the PMAAx-P(St-alt-NMI)y adsorption density and calcium ion concentration. This study opens up a general and efficient route for the preparation of a wide range of crystalline nanocomposite materials with a controlled internal composition and structure.

Seeded Raft Polymerization-Induced Self-assembly: Recent Advances and Future Opportunities.

Over the past decade, polymerization-induced self-assembly (PISA) has fully proved its versatility for scale-up production of block copolymer nanoparticles with tunable sizes and morphologies; yet, there are still some limitations. Recently, seeded PISA approaches combing PISA with heterogeneous seeded polymerizations have been greatly explored and are expected to overcome the limitations of traditional PISA. In this review, recent advances in seeded PISA that have expanded new horizons for PISA are highlighted including i) general considerations for seeded PISA (e.g., kinetics, the preparation of seeds, the selection of monomers), ii) morphological evolution induced by seeded PISA (e.g., from corona-shell-core nanoparticles to vesicles, vesicles-to-toroid, disassembly of vesicles into nanospheres), and iii) various well-defined nanoparticles with hierarchical and sophisticated morphologies (e.g., multicompartment micelles, porous vesicles, framboidal vesicles, AXn -type colloidal molecules). Finally, new insights into seeded PISA and future perspectives are proposed. This article is protected by copyright. All rights reserved.

Efficient Synthesis of Hydrolytically Degradable Block Copolymer Nanoparticles via Reverse Sequence Polymerization‐Induced Self‐Assembly in Aqueous Media

AbstractHydrolytically degradable block copolymer nanoparticles are prepared via reverse sequence polymerization‐induced self‐assembly (PISA) in aqueous media. This efficient protocol involves the reversible addition‐fragmentation chain transfer (RAFT) polymerization of N,N′‐dimethylacrylamide (DMAC) using a monofunctional or bifunctional trithiocarbonate‐capped poly(ϵ‐caprolactone) (PCL) precursor. DMAC monomer is employed as a co‐solvent to solubilize the hydrophobic PCL chains. At an intermediate DMAC conversion of 20–60 %, the reaction mixture is diluted with water to 10–25 % w/w solids. The growing amphiphilic block copolymer chains undergo nucleation to form sterically‐stabilized PCL‐core nanoparticles with PDMAC coronas. 1H NMR studies confirm more than 99 % DMAC conversion while gel permeation chromatography (GPC) studies indicate well‐controlled RAFT polymerizations (Mw/Mn≤1.30). Transmission electron microscopy (TEM) and dynamic light scattering (DLS) indicate spheres of 20–120 nm diameter. As expected, hydrolytic degradation occurs within days at 37 °C in either acidic or alkaline solution. Degradation is also observed in phosphate‐buffered saline (PBS) (pH 7.4) at 37 °C. However, no degradation is detected over a three‐month period when these nanoparticles are stored at 20 °C in deionized water (pH 6.7). Finally, PDMAC30‐PCL16‐PDMAC30 nanoparticles are briefly evaluated as a dispersant for an agrochemical formulation based on a broad‐spectrum fungicide (azoxystrobin).

Efficient Synthesis of Hydrolytically Degradable Block Copolymer Nanoparticles via Reverse Sequence Polymerization-Induced Self-Assembly in Aqueous Media.

Hydrolytically degradable block copolymer nanoparticles are prepared via reverse sequence polymerization-induced self-assembly (PISA) in aqueous media. This efficient protocol involves the reversible addition-fragmentation chain transfer (RAFT) polymerization of N,N'-dimethylacrylamide (DMAC) using a monofunctional or bifunctional trithiocarbonate-capped poly(ϵ-caprolactone) (PCL) precursor. DMAC monomer is employed as a co-solvent to solubilize the hydrophobic PCL chains. At an intermediate DMAC conversion of 20-60 %, the reaction mixture is diluted with water to 10-25 % w/w solids. The growing amphiphilic block copolymer chains undergo nucleation to form sterically-stabilized PCL-core nanoparticles with PDMAC coronas. 1 H NMR studies confirm more than 99 % DMAC conversion while gel permeation chromatography (GPC) studies indicate well-controlled RAFT polymerizations (Mw /Mn ≤1.30). Transmission electron microscopy (TEM) and dynamic light scattering (DLS) indicate spheres of 20-120 nm diameter. As expected, hydrolytic degradation occurs within days at 37 °C in either acidic or alkaline solution. Degradation is also observed in phosphate-buffered saline (PBS) (pH 7.4) at 37 °C. However, no degradation is detected over a three-month period when these nanoparticles are stored at 20 °C in deionized water (pH 6.7). Finally, PDMAC30 -PCL16 -PDMAC30 nanoparticles are briefly evaluated as a dispersant for an agrochemical formulation based on a broad-spectrum fungicide (azoxystrobin).

Group‐Transfer Polymerization‐Induced Self‐Assembly (GTPISA) in Non‐polar Media: An Organocatalyzed Route to Block Copolymer Nanoparticles at Room Temperature

AbstractPolymerization‐induced self‐assembly (PISA) enables the synthesis at large scale of a wide variety of functional nanoparticles. However, a large number of works are related to controlled radical polymerization (CRP) methods and are generally undertaken at elevated temperatures (>50 °C). Here is the first report on methacrylate‐based nanoparticles fabricated by group transfer polymerization‐induced self‐assembly (GTPISA) in non‐polar media (n‐heptane). This GTPISA process is achieved at room temperature (RT) using 1‐methoxy‐1‐(trimethylsiloxy)‐2‐methylprop‐1‐ene (MTS) and tetrabutylammonium bis‐benzoate (TBABB) as initiator and organic catalyst, respectively. Under these conditions, well‐defined metal‐free and colorless diblock copolymers are produced with efficient crossover from the non‐polar stabilizing poly(lauryl methacrylate) (PLMA) block to the non‐soluble poly(benzyl methacrylate) (PBzMA) segment. The resulting PLMA‐b‐PBzMA block copolymers simultaneously self‐assemble into nanostructures of various sizes and morphologies. GTPISA in non‐polar solvent proceeds rapidly at RT and avoids the use of sulfur or halogenated compounds or metallic catalysts associated with the implementation of CRP methods, thus expanding the potential of PISA formulations for applications in non‐polar environments.

Group-Transfer Polymerization-Induced Self-Assembly (GTPISA) in Non-polar Media: An Organocatalyzed Route to Block Copolymer Nanoparticles at Room Temperature.

Polymerization-induced self-assembly (PISA) enables the synthesis at large scale of a wide variety of functional nanoparticles. However, a large number of works are related to controlled radical polymerization (CRP) methods and are generally undertaken at elevated temperatures (>50 °C). Here is the first report on methacrylate-based nanoparticles fabricated by group transfer polymerization-induced self-assembly (GTPISA) in non-polar media (n-heptane). This GTPISA process is achieved at room temperature (RT) using 1-methoxy-1-(trimethylsiloxy)-2-methylprop-1-ene (MTS) and tetrabutylammonium bis-benzoate (TBABB) as initiator and organic catalyst, respectively. Under these conditions, well-defined metal-free and colorless diblock copolymers are produced with efficient crossover from the non-polar stabilizing poly(lauryl methacrylate) (PLMA) block to the non-soluble poly(benzyl methacrylate) (PBzMA) segment. The resulting PLMA-b-PBzMA block copolymers simultaneously self-assemble into nanostructures of various sizes and morphologies. GTPISA in non-polar solvent proceeds rapidly at RT and avoids the use of sulfur or halogenated compounds or metallic catalysts associated with the implementation of CRP methods, thus expanding the potential of PISA formulations for applications in non-polar environments.

Synthesis of Hydrophobic Block Copolymer Nanoparticles in Alcohol/Water Stabilized by Poly(methyl methacrylate) via RAFT Dispersion Polymerization-Induced Self-Assembly

Poly(methyl methacrylate) (PMMA) is an important common polymer widely used in industry. While PMMA has been used as a core-forming block for polymerization-induced self-assembly (PISA), a powerful approach for the synthesis of block copolymer nanoparticles, it has not been utilized as a corona block due to PMMA being insoluble in common solvents for PISA formulations (e.g., water and alcohols). Exploiting the solubility of PMMA-dithiobenzoate (DTB) in ethanol/water mixtures, such macroRAFT agents have in the present work been successfully employed for reversible addition–fragmentation chain transfer (RAFT) PISA in ethanol/water (80/20 by volume). RAFT dispersion polymerization of benzyl methacrylate mediated by PMMA-DTB macroRAFT agents with various degrees of polymerization has been investigated. Transmission electron microscopy analyses revealed well-defined block copolymer nano-objects, including spheres, worms, as well as vesicles. Nanoparticles comprising a PMMA outer layer would have superior compatibility with various hydrophobic polymer matrices, thereby enabling various new applications such as, e.g., use as nanofillers.