Tooth Bleaching Research Articles

Knowledge of Tooth Discoloration and Tooth Bleaching amongst Adult Patients Visiting a Dental Hospital in Kathmandu, Nepal

A beautiful smile increases the self-confidence and well being of an individual. Tooth discoloration is one of the cause for a patient to stop smiling, be less interactive with other people and the person might feel neglected from the society. Many people don’t know about the various causes of tooth discoloration and the treatment options. Bleaching is a very conservative method to whiten the teeth. Until now limited studies have been done to assess the knowledge of tooth discoloration and vital tooth bleaching in context to Nepal. Hence, the objective of this study was to assess the knowledge of tooth discoloration and tooth bleaching amongst adult patients. This cross sectional study was done on 326 patients of 18 years and above. Personal interviews using a structured and validated questionnaire were conducted to collect the following information: demographic data, the participant’s level of satisfaction of their tooth color, the participant’s level of knowledge on tooth discoloration and tooth bleaching. Data were analyzed using Chi square test and descriptive statistics were calculated. It was found that majority of the study participants (63.8%) were satisfied with the color of their teeth and most of them (58.9%) had not heard about tooth bleaching. It was seen that there was no association of different aspects of bleaching as well as etiology of tooth discoloration with gender, age group, level of education and marital status.

Effectiveness of KTP lasers in tooth bleaching, by comparing tooth color change after bleaching with KTP, Nd:YAG, Er:YAG, and diode laser system: A systematic review.

This systematic review evaluated the role of Potassium-titanyl-phosphate (KTP) lasers in dental bleaching by comparing tooth color change and rise in intrapulpal temperature after bleaching with KTP, Neodymium-doped yttrium aluminum garnet (Nd:YAG), Er:YAG, and diode laser system. Following were the inclusion criteria: in vitro studies in English available in full text. Articles published between 2000 and 2021 were selected. The search for was conducted on PubMed, Cochrane library/CENTRAL, Wiley online library, ProQuest, Science Direct, and Hand searching/specialized registers. Keywords were used: "Lasers" [Mesh] and "Tooth bleaching" [Mesh] using Boolean operators. A total of four articles fulfilled the inclusion criteria. The quality assessment of studies included was undertaken independently as part of data extraction process. KTP lasers demonstrated more effectiveness in attaining color change in stained teeth and showed the lowest rise in intrapulpal temperature. Based on the data obtained in the present review, the choice of bleaching treatment is directly related to the type of discoloration, activation of the bleaching agent, and esthetic requirement. Although all bleaching procedures were effective in color change, the KTP laser showed better results when compared to other laser activation. The bleaching treatment protocol is directly related to the type of discoloration, activation of the bleaching agent, and esthetic requirement. It has been demonstrated that a faster change in color can be obtained when bleaching is performed in combination with a light source, i.e., power bleaching aiming for a more in-depth change of color.

Phytochemicals in vital tooth bleaching: Spectrophotometric evaluation of efficacy with papaya, pineapple, or kiwi extracts and 30% hydrogen peroxide.

Dental bleaching, a common cosmetic treatment, typically uses hydrogen peroxide (H2O2). Yet, the search for natural options has prompted an investigation into fruit extract efficacies such as papain, bromelain, and actinidin for tooth whitening. The aim of this study was to evaluate the efficacy of 30% hydrogen peroxide and fruit extracts (papaya, pineapple, and kiwi) on human enamel using a spectrophotometer at different time intervals. Eighty maxillary anterior teeth were stained with tea solution and evaluated for baseline color. They were then divided into four groups: hydrogen peroxide alone and hydrogen peroxide combined with papaya, pineapple, or kiwi extracts. Each group was further divided based on bleaching duration: 10 or 20 min. The color value of the bleached teeth was measured using a reflectance spectrophotometer. In order to analyze the data, one-way ANOVA, post hoc Tukey, and paired t-tests were used. The significance level was established at α =0.05. Combining hydrogen peroxide with pineapple extract showed the highest efficacy, followed by papaya and kiwi extracts. Hydrogen peroxide alone also demonstrated significant bleaching efficacy, albeit lower than the combinations with fruit extracts. Combining hydrogen peroxide with pineapple and papaya extracts notably improves dental bleaching efficacy, as shown by reduced color difference (ΔE) values. This underscores the potential of natural enzymes in tooth whitening.

One Year Clinical Follow-up of the rebound of bleached teeth Color using of two different in-office bleaching techniques.

One Year Clinical Follow-up of the rebound of bleached teeth Color using of two different in-office bleaching techniques.

Distinguishing discolored caries lesions using biofluorescence and dental bleaching: An in vitro simulation model study

BackgroundDistinguishing between discoloration caused by caries and organic stains is challenging for dentists in clinical settings. Biofluorescence (BF)-bleaching assesses caries lesions by evaluating BF changes after removing organic stains through dental bleaching, leaving cariogenic discoloration. This study aimed to apply BF-bleaching to a simulation model mimicking cariogenic discoloration and compare the BF color changes between organic staining and cariogenic discoloration. MethodsThirty artificial caries lesions in bovine incisors were equally divided into three groups: non-stained (NS), organic-stained (OS), and cariogenic-stained (CS) groups. The specimens were treated with bleaching agent, then BF color of each specimen was evaluated using red BF intensity (ΔR), BF hue angle (h°), and hyperspectral BF spectrum. ResultsThe ΔR of CS was approximately 2.74 and 1.73 times higher than that of OS, at baseline and after bleaching for 20 min, respectively. After 20 min of bleaching, the h° of CS increased by approximately 8.1° compared to the baseline, while maintaining the red BF hue range (345‒15°). In contrast, the BF hue of OS shifted from orange (15‒45°) to yellow (45‒75°) simultaneously, and the h° change was approximately 21.9°. Both CS and OS exhibited first emission peaks near 515 nm, and CS showed second peaks in the red range (620‒780 nm). After bleaching, the first peaks were restored to the sound enamel direction (peak at 486 nm), whereas the second peaks of red BF in CS were maintained. ConclusionApplying BF-bleaching to discolored caries lesions allowed differentiation between cariogenic discoloration and organic staining based on BF color changes.

Efficacy of polishing in reducing surface roughness of different restorative materials after tooth whitening

Efficacy of polishing in reducing surface roughness of different restorative materials after tooth whitening

Exploring the efficacy of laser-assisted in-office tooth bleaching: A study on varied irradiation times and power settings utilizing a diode laser (445 nm)

The aim of this study was to evaluate the effectiveness of a laser-assisted in-office tooth bleaching treatment, employing a diode laser (445 nm) using different power and time settings. Two hundred human incisors were collected for evaluating tooth color change (ΔΕ00) and whiteness index in dentistry (ΔWID) following laser-assisted tooth bleaching treatment. The specimens were distributed into 25 groups (n = 8) according to laser output power (0.5–2 W) and duration of irradiation (10–60 s) that was applied. ΔΕ00 and ΔWID were evaluated using a spectrophotometer at three points of time (24 h, 1 week and 1 month after treatments). Three-way ANOVA revealed that power, duration of laser irradiation, and time of measurement after bleaching treatments significantly affected both ΔΕ00 and ΔWID(p < 0.05). Furthermore, laser irradiation increased ΔΕ00 and ΔWID at all applied powers compared to the control group (p < 0.05), but this increase was dependent on the duration of irradiation. Laser irradiation significantly increased ΔΕ00 when the duration of operation was 50–60 s at 0.5–1 W, while at 1.5–2 W was significantly increased when the duration was 30–60 s. ΔWID was significant higher in the laser groups compared to the control group at all powers, except for 0.5 W where it was significant higher when the duration was 50–60 s. The outcomes of the study can help in selecting the suitable power settings and duration of laser exposure to achieve the optimal whitening results while ensuring the safety of the tooth pulp.

The Application of Apple (Malus sylvestris) Extract-Based Gel: Effects on Teeth Colour Change and Hardness

Manalagi apple extract, which contains malic acid, has the potential to be used as an alternative teeth whitening. Therefore, this study aimed to investigate the effect of Manalagi Apple (Malus sylvestris) extract-based gel on teeth colour change and hardness. It included an experimental laboratory with a pre-test, post-test, and control group design. The samples consisted of thirty anterior extracted teeth which were divided into five groups, including negative control, 10% carbamide peroxide, 25%, 50%, and 75% extract. Teeth were discoloured for seven days using a coffee solution, and gel was applied for 8 hours a day for 14 days. Teeth colour change was assessed using colourimeter device, while hardness was measured using a micro Vicker hardness tester. The data analysis was carried out using the Kruskal-Wallis test followed by Mann Whitney test, and the t-dependent test. The result showed that there was a significant change in teeth colour after treatment with 75% apple extract gel compared to the negative control and carbamide peroxide 10%. The extracted gel significantly increased teeth hardness value. These results showed that apple extract-based gel improves teeth colour without negatively affecting the hardness, suggesting that apple extract-based gel can potentially be used as a dental whitening agent.

Effects of Internal Bleaching on Microtensile Bond Strength of a Former Veneer Composite to Tooth Enamel

Background: At present, combined provision of direct composite restorations and dental bleaching has become increasingly popular to meet the esthetic demands of patients. This study aimed to assess the effect of internal bleaching on microtensile bond strength of composite to freshly veneered enamel. Methods: In this in vitro experimental study, 50 sound extracted human premolars were randomly divided into five groups (n=10). All teeth received composite veneers. Two groups underwent no further intervention and were subjected to measurement of microtensile bond strength of composite to enamel 24 hr and one week after the veneering. The remaining three groups underwent internal bleaching. Group 3 underwent bleaching one month after the veneering, and microtensile bond strength was measured after 24 hr. In groups 4 and 5, bleaching was performed immediately after the veneering. Microtensile bond strength was measured after 24 hr in group 4 and after one month in group 5. Data were analyzed using one-way ANOVA. Results: All the groups were not significantly different regarding the mean bond strength (p=0.110), but they were significantly different in terms of the mode of failure (p=0.01) such that the mode of failure was mainly adhesive in the three bleached groups. Conclusion: Internal bleaching after composite veneering has no significant effect on microtensile bond strength of composite to the enamel.

Reduction of surface treatment time by combination of citric acid and ascorbic acid while restoring shear bond strength of metal brackets bonded to bleached enamel: a pilot study

BackgroundTo investigate the effect of a 50% ascorbic acid with 50% citric acid solution on the immediate shear bond strength (SBS) of metallic brackets after tooth bleaching. The enamel etching pattern and the required quantity of these combined acids as antioxidants following 35% hydrogen peroxide (HP) bleaching were also determined.MethodsThe stability of the solution at room temperature was assessed at various time intervals. Fifty teeth were randomly divided into five groups: non-bleached (G1), bleached then acid etched (G2), bleached followed by a 10-minute treatment with 10% sodium ascorbate and acid etched (G3), 5-minute treatment with 50% ascorbic acid (G4), and 5-minute treatment with a combination of 50% ascorbic acid and 50% citric acid (G5). Groups G2, G3, G4 and G5 were bleached by 35% HP gel for a total of 32 min. Acid etching in groups G1, G2, and G3 was performed using 37% phosphoric acid (Ormco®, Orange, CA, USA) for 15 s. In all groups, metal brackets were immediately bonded using Transbond™ XT primer and Transbond™ PLUS adhesive, with light curing for 40 s. The SBS was tested with a universal testing machine, and statistical analysis was conducted using one-way ANOVA followed by Tukey’s HSD test. The level of significance was set at p < 0.05 for all statistical tests.ResultsStability tests demonstrated that the combined acids remained effective for up to 21 days. Group G5 significantly increased the SBS of bleached teeth to the level of G1 (p < 0.05), while G3 did not achieve the same increase in SBS (p > 0.05). SEM analysis revealed enamel etching patterns similar to those of both control groups (G1 and G2). Kinetic studies at 6 min indicated that the antioxidation in G5 reacted 0.2 mmole lower than in G3 and G4.Conclusion5-minute application of the combined acids enhanced the SBS of bleached teeth comparable to unbleached teeth. The combined acids remain stable over two weeks, presenting a time-efficient, single-step solution for antioxidant application and enamel etching in orthodontic bracket bonding.

Effect of air-abrasion pretreatment with three desensitizing agents on efficacy of in-office tooth bleaching.

To evaluate the influence of air-abrasion of enamel with three different desensitizing powders on the whitening effect of a bleaching gel containing 40% H2O2, which was used for in-office tooth bleaching. Forty human incisors, extracted and prepared, were acquired for this study and subsequently randomized into four groups (n = 10). The control group specimens underwent no pretreatment prior to the bleaching procedure, whereas the remaining three groups underwent air abrasion using distinct desensitizing powders; (a) Sylc, which contains bioglass 45S5; (b) BioMinF, which contains calcium phospho-fluoro-silicate glass; and (c) MI Pearls, which contains nano-hydroxyapatite, 1 h preceding the Opalescence Boost PF 40% bleaching procedure. Color measurements were conducted using a double-beam UV-Vis spectrophotometer at four distinct time points (prior to bleaching, 24 h, 15 days, and 30 days post-bleaching). Tooth color change outcomes revealed that there were no statistically significant results with respect to the interaction of the two criteria (treatments and time) (p = 0.990). Additionally, there were no statistically significant results with respect to the main effects of treatments (p = 0.385), while there were statistically significant effects with respect to the time criterion (p = 0.013). The use of the tested desensitizing powders prior the bleaching procedure did not affect the tooth color change induced by the tested bleaching agent. Tooth color change and whiteness are not affected by air-abrasion desensitizing treatments when applied prior to in-office bleaching procedures.

Effectiveness and safety of biosilicate-enhanced bleaching gels on enamel with early erosion lesion.

This study evaluated the efficacy and cytotoxicity of 35% hydrogen peroxide (HP) gel incorporated with 10% (w/w) biosilicate (BioS) on sound enamel and early-stage enamel erosion lesions. Discs of enamel/dentin were selected, subjected to erosive cycles (0.3% citric acid, pH 2.6), and treated with (n = 8): HP (35% HP, positive control); HP_BioS [carboxymethyl cellulose (CMC) + HP + BioS]; BioS (CMC + BioS); CMC (negative control). The discs were adapted to artificial pulp chambers with the enamel exposed for bleaching, and the dentin facing toward the culture medium (Dulbecco's modified Eagle's medium [DMEM]). Bleaching was performed in three 30-min sessions at 7-day intervals. After bleaching, the diffusion product (DMEM extract + diffused HP) was pipetted onto MDPC-23 odontoblastic cell line and inoculated. Color parameters (ΔL, Δa, Δb), color change (ΔE00), and changes in whiteness index (ΔWID) were determined before (T0) and after the last bleaching session (T3). Cell viability (MTT, %), H2O2 diffusion (μg/mL), oxidative cell stress (OxS), and cell fluorescence (live/dead assay, in confocal microscopy) were assessed (ANOVA/Tukey; α = 0.05). No difference in ΔL, Δa, Δb, ΔE00, and ΔWID were found between HP and HP_BioS (p > 0.05). The incorporation of BioS decreased the HP diffusion into the substrates and mitigated oxidative stress in early-stage eroded enamel (p < 0.05). HP_BioS presented significantly higher cell viability compared with HP under erosion conditions. Live/dead assay indicated that BioS_HP maintained viability with larger clusters of viable cells. Incorporating BioS into HP maintained bleaching effectiveness, favored cell viability, reduced the oxidative stress, and the cytotoxicity in teeth with early-stage erosion. BioS formulation showed promising results for reducing cytotoxicity in patients seeking tooth bleaching and presenting undetectable early-stage erosion.

Bleaching effect on bonding performance of composite to enamel.

This study aimed to assess the effects of dental bleaching on the immediate shear bond strength (SBS) of composite to enamel. Different bleaching methods and time intervals between bleaching and composite restoration were examined. A total of 45 enamel specimens were divided into three groups (n = 15) based on the applied bleaching protocol: in-office (A), at-home (B), and unbleached control (C). Groups A and B were then subdivided into three time intervals until bonding: 1, 3, and 7 days. The composite was bonded to enamel using self-etch adhesive technique and submitted to SBS testing. The enamel surface and adhesive interface were observed under scanning electron microscope (SEM). The highest average SBS was measured in the control (unbleached) group (31.1 ± 3.4). A significant difference in SBS was found between the control and in-office bleaching (p < .001), as well as between control and at-home bleaching (p = .034), while the difference between in-office and at-home bleaching methods was insignificant. In relation to the waiting period, a significant reduction in SBS (p < .001) was found 1 day post-bleaching. The weakest marginal sealing to enamel under SEM was observed also 1 day after bleaching. Both bleaching methods significantly reduced the SBS of composite to enamel, especially immediately after the bleaching procedure. Reduction in SBS is temporary and 3-day waiting period seems to be sufficient to reverse the adverse effects of bleaching. RESEARCH HIGHLIGHTS: SBS of composite to enamel is significantly reduced by bleaching procedures, especially immediately after bleaching. The reduction in SBS is temporary and reversible by delaying the restoration for a minimum of 3 days.

The Effect of Two Different Wavelengths of Diode Laser on the Shear Bond Strength of Composite to Dental Enamel after Bleaching Process: An In Vitro Study.

In recent years, tooth whitening has become one of the most popular ways of achieving the original tooth color. The effect of whitening gel can be improved through heat, light or laser. The bond strength between the enamel and the composite can be reduced through bleaching and laser radiation. The purpose of this study is to assess the shear bond strength of resin composite to enamel after a bleaching process using hydrogen peroxide, with and without a laser (970 nm and 445 nm lasers). This study used 51 extracted anterior teeth without caries that were divided into three groups. A 40% hydrogen peroxide gel was used on the enamel of all teeth. The control group received bleaching without a laser. Both the second and third treatment groups received bleaching with a laser, one with 970 nm and the other with 445 nm. After the bleaching process, all groups had etching, bonding and curing of the composite performed. Lastly, the shear bond strength between the enamel and the composite was measured and the failure modes were recorded. The data were compared using a one-way ANOVA test. The mean shear bond strength between the enamel and the composite in the 445 nm group three (445 nanometer) was significantly lower than the other groups (p < 0.05). There was no significant difference between the control and the 970 nm groups (p = 0.2). According to the laser wavelengths and parameters that were used in this study and the results of this study, office bleaching with a 445 nm laser weakened the shear bond strength between the enamel and the composite.

Effect of Calcium Hydroxide and Antioxidant Agents Filling the Pulp Chamber after Internal Bleaching.

To evaluate the effect of calcium hydroxide (CH), sodium ascorbate (SA) and sodium thiosulfate (ST) filling the pulp chamber on color stability and longevity of teeth after internal bleaching. Crowns of bovine incisors were submitted to internal bleaching and divided into groups according the material used in the pulp chamber: Control, CH, SA, ST. Each group was divided into two subgroups according to the time to perform restorative procedures (7 or 15 days). Color measurement was performed with a spectrophotometer at nine periods. The darkening (ΔE) values were calculated. The Mann-Whitney test was used to statistically analyze the data (p ⟨ 0.05). After bleaching, ΔE values were higher than 3.5, showing that the procedure was effective. After 24 hours, no difference was observed between groups. After 7 days, SA showed higher ΔE than the control group (p ⟨ 0.05). CH and TS did not differ from the control group. In restorations performed after 7/15 days, SA group showed higher values of darkening after 1 and 4 months than the control group (p ⟨ 0.05). SA induced perceptible darkening after bleaching and should not be used to fill the pulp chamber. ST and CH show color stability and longevity after 12 months.

Inverted Layering Technique as a Biomimetic Procedure in a Multidisciplinary Resolution of Discolored Teeth: A Case Report.

The objective of this work is to report a restorative approach with composite resin applied in reverse in the aesthetic resolution of darkened anterior teeth. A 27-year-old female patient presented with the main complaint of dissatisfaction with the aesthetics of her smile due to dental darkening, a result of childhood trauma, without painful symptoms, pathological clinical signs or change in care. In the intraoral examination, a darkening of teeth 11 and 21 was observed, which radiographically showed thickening of the periodontal ligament, with disharmonious configuration of the marginal gingiva. From the clinical and radiographic characteristics, we opted for periodontal intervention for recovery and gingival levelling, followed by endodontic intervention and aesthetic restorative restoration. The restorative step was carried out sequentially by internal tooth bleaching, removal of dentin still pigmented after bleaching and enamel preservation. Soon after, it was restored in an alternative way and layered using a technique called reverse, using strips of polyethylene fiber over the dentin resin. The technique preserved the remaining enamel with the maintenance of the original remaining guides, proving to be a viable conservative alternative since of the diagnosis to the restorative conclusion in view of the longitudinal confirmation of the restorative efficacy after 1 year.

Evaluating the effectiveness of two wavelengths of 810 and 980 nm Diode laser with two different beam profiles on tooth discoloration in bleaching: an experimental study

Teeth color has a significant impact on facial aesthetics. Tooth bleaching is the safest way to lighten the color of your teeth. Today, hydrogen peroxide is the most commonly used bleaching agent. The diode laser is one of the light sources that speeds up the bleaching process. One of the laser beam features is the laser beam profile, which depicts the distribution of laser intensity across the beam section. The goal of this study is to look into the effectiveness of Gaussian and Flat top beam profiles on tooth shade using two diode laser wavelengths of 810 and 980 nm in the tooth bleaching process. Fifty human anterior and premolar teeth were extracted and placed in a tea and coffee solution for three weeks before being divided into five groups. The first group did not receive laser radiation because 40% hydrogen peroxide was used; in the second and third groups, the profile of the flat top beam and the wavelength were 810 and 980 nm, respectively; and in the fourth and fifth groups, the wavelength of the Gaussian beam profile was 810 and 980 nm. The shade of the samples before and after bleaching was measured with a CIELab-based spectrophotometer, and the results were analyzed using one-way ANOVA and Tukey’s multiple comparison test. All bleaching methods resulted in a significant change in tooth color (ΔE&gt;3.3). There was a significant difference in average shade changes across groups (P&lt;0.001). The highest degree of shade change was observed in two groups of lasers with a wavelength of 980 nm and profiles of Flat top beam (ΔE=5.35) and Gaussian (ΔE=5.02). There were no differences between the remaining groups. We conclude that the 980 nm wavelength produces a greater shade change than the 810 nm wavelength and chemical method. The diode laser’s 810 nm wavelength has no effect on the shade of teeth.

“Ǫuantum Jump” and Their Effects on the Photo Whitening Technique

Recent research on tooth whitening aims to optimize whitening while minimizing its side effects, such as tooth hypersensitivity and damage to the soft and hard tissues of the oral cavity. Various research with methodology using colorimetric and spectrophotometric tests shows that the technique applying violet light, with a wavelength of 408 nm, produced better results than other sources normally used in tooth whitening. Scientific findings prove the results that simultaneously applying dental whitening in the office with transparent/colorless gels and violet LEDs allows the light to interact directly with the pigments, increasing the oxidation effect with the peroxide itself. So, there is a double effect: the photochemical action with the oxidation molecule with the peroxides promoting the optimization of the traditional use of chemical agents. This short communication aims to highlight the advantage of using violet light and provide more physical and chemical information about this whitening process. This is a new technique, without producing heat, roughness or sensitivity, with comfort and safety for the patient and professional. We can conclude that new studies become relevant for the evolution of this technique.

Whitening and antioxidant activities of Inonotus sanghuang Extract and development of primary whitening gel products.

Polysaccharides and flavonoids have excellent antioxidant properties and tyrosinase inhibitory effects. In this paper, the antioxidant capacity of Inonotus sanghuang extract and its inhibition kinetics on mushroom tyrosinase were investigated to determine the preparation process of Inonotus sanghuang primary whitening gel. By conducting experimental studies on the effects of water extract and alcohol extract of Inonotus sanghuang on antioxidant capacity and tyrosinase activity, their inhibitory ability and types of inhibitory effects were determined. The single factor experiment was used to determine the preparation process of Sanghuang primary whitening gel. This study has proven that the extract of Inonotus sanghuang possesses antioxidant and tyrosinase inhibitory capabilities. It also identified the preparation process for the primary whitening gel of Inonotus sanghuang, thereby providing a theoretical and experimental basis for the development of whitening products utilising Inonotus sanghuang.

Oxygen self-sufficient nanodroplet composed of fluorinated polymer for high-efficiently PDT eradicating oral biofilm

Oral biofilm is the leading cause of dental caries, which is difficult to completely eradicate because of the complicated biofilm structure. What's more, the hypoxia environment of biofilm and low water-solubility of conventional photosensitizers severely restrict the therapeutic effect of photodynamic therapy (PDT) for biofilm. Although conventional photosensitizers could be loaded in nanocarriers, it has reduced PDT effect because of aggregation-caused quenching (ACQ) phenomenon. In this study, we fabricated an oxygen self-sufficient nanodroplet (PFC/TPA@FNDs), which was composed of fluorinated-polymer (FP), perfluorocarbons (PFC) and an aggregation-induced emission (AIE) photosensitizer (Triphenylamine, TPA), to eradicate oral bacterial biofilm and whiten tooth. Fluorinated-polymer was synthesized by polymerizing (Dimethylamino)ethyl methacrylate, fluorinated monomer and 1-nonanol monomer. The nanodroplets could be protonated and behave strong positive charge under bacterial biofilm acid environment promoting nanodroplets deeply penetrating biofilm. More importantly, the nanodroplets had extremely high PFC and oxygen loading efficacy because of the hydrophobic affinity between fluorinated-polymer and PFC to relieve the hypoxia environment and enhance PDT effect. Additionally, compared with conventional ACQ photosensitizers loaded system, PFC/TPA@FNDs could behave superior PDT effect to ablate oral bacterial biofilm under light irradiation due to the unique AIE effect. In vivo caries animal model proved the nanodroplets could reduce dental caries area without damaging tooth structure. Ex vivo tooth whitening assay also confirmed the nanodroplets had similar tooth whitening ability compared with commercial tooth whitener H2O2, while did not disrupt the surface microstructure of tooth. This oxygen self-sufficient nanodroplet provides an alternative visual angle for oral biofilm eradication in biomedicine.