In this paper details of rotary tillage regarding the movement of tilled soil are presented. A noticeable reduction of tillage power requirement was achieved during rotary tillage. The soil movement depended upon the direction of rotation and the ratio of tilling depth ( H) to blade radius ( R). With the differences in the soil movement, four kinds of rotary tilling patterns were determined. Increase in operating power generally resulted when a large amount of tilled soil was re-tilled in the zone of blade rotation. Improvement of backward throwing of the soil was required for power reduction, especially in deep tillage. A backward throwing model of soil by the blade was developed on the basis of trochoidal motion of the blade and sliding motion of the soil over a scoop-surface on the horizontal portion of the blade. The throwing model estimated the conditions for avoiding re-tillage, such as direction of rotation and shape of scoop-surface. The throwing model was applied to the design of the shape of the scoop-surface which enabled maximum backward throwing of the soil sufficient to avoid re-tilling. At tilling depths greater than 300 mm, reverse rotation with the new shaped blades brought about a tillage power reduction by about a half compared to forward or reverse rotation with conventional blades.