Black Lipid Membranes Research Articles

Identification and Functional Characterization of a Novel OprD-like Chitin Uptake Channel in Non-chitinolytic Bacteria

Chitoporin from the chitinolytic marine Vibrio has been characterized as a trimeric OmpC-like channel responsible for effective chitin uptake. In this study we describe the identification and characterization of a novel OprD-like chitoporin (so-called EcChiP) from Escherichia coli The gene was identified, cloned, and functionally expressed in the Omp-deficient E. coli BL21 (Omp8) Rosetta strain. On size exclusion chromatography, EcChiP had an apparent native molecular mass of 50 kDa, as predicted by amino acid sequencing and mass analysis, confirming that the protein is a monomer. Black lipid membrane reconstitution demonstrated that EcChiP could readily form stable, monomeric channels in artificial phospholipid membranes, with an average single channel conductance of 0.55 ± 0.01 nanosiemens and a slight preference for cations. Single EcChiP channels showed strong specificity, interacting with long chain chitooligosaccharides but not with maltooligosaccharides. Liposome swelling assays indicated the bulk permeation of neutral monosaccharides and showed the size exclusion limit of EcChiP to be ∼200-300 Da for small permeants that pass through by general diffusion while allowing long chain chitooligosaccharides to pass through by a facilitated diffusion process. Taking E. coli as a model, we offer the first evidence that non-chitinolytic bacteria can activate a quiescent ChiP gene to express a functional chitoporin, enabling them to take up chitooligosaccharides for metabolism as an immediate source of energy.

A Simple low-cost device enables four epi-illumination techniques on standard light microscopes.

Back-scattering darkfield (BSDF), epi-fluorescence (EF), interference reflection contrast (IRC), and darkfield surface reflection (DFSR) are advanced but expensive light microscopy techniques with limited availability. Here we show a simple optical design that combines these four techniques in a simple low-cost miniature epi-illuminator, which inserts into the differential interference-contrast (DIC) slider bay of a commercial microscope, without further additions required. We demonstrate with this device: 1) BSDF-based detection of Malarial parasites inside unstained human erythrocytes; 2) EF imaging with and without dichroic components, including detection of DAPI-stained Leishmania parasite without using excitation or emission filters; 3) RIC of black lipid membranes and other thin films, and 4) DFSR of patterned opaque and transparent surfaces. We believe that our design can expand the functionality of commercial bright field microscopes, provide easy field detection of parasites and be of interest to many users of light microscopy.

Addition of Cleaved Tail Fragments during Lipid Oxidation Stabilizes Membrane Permeability Behavior.

Lipid oxidation has been linked to plasma membrane damage leading to cell death. In previous work, we examined the effect of oxidation on bilayer permeability by replacing defined amounts of an unsaturated lipid species with the corresponding phospholipid product that would result from oxidative tail scission of that species. This study adds the cleaved tail fragment, better mimicking the chemical results of oxidation. Permeability of PEG12-NBD, a small, uncharged molecule, was measured for vesicles with oxidation concentration corresponding to between 0 and 18 mol % of total lipid content. Permeability was measured using a microfluidic trap to capture the vesicles and spinning disk confocal microscopy (SDCM) to measure the transport of fluorescent PEG12-NBD at the equatorial plane. The thicknesses of lipid bilayers containing oxidized species were estimated by measuring capacitance of a black lipid membrane while simultaneously measuring bilayer area. We found that relative to chemically modeled oxidized bilayers without tail fragments, bilayers containing cleaved tail groups were less permeable for the same degree of oxidation. Curiously, membrane capacitance measurements indicated that the addition of tail fragments to chemically modeled oxidized bilayers also thinned these bilayers relative to samples with no tail fragments; in other words, the more permeable membranes were thicker. Above 12.5% chemically modeled oxidation, compositions both with and without the cleaved tail groups showed pore formation. This work highlights the complexity of the relationship between chemically modeled lipid bilayer oxidation and cell membrane properties.

Ligand-lipid and ligand-core affinity control the interaction of gold nanoparticles with artificial lipid bilayers and cell membranes

Interactions between nanoparticles (NPs) and biomembranes depend on the physicochemical properties of the NPs, such as size and surface charge. Here we report on the size-dependent interaction of gold nanoparticles (AuNPs), stabilized with ligands differing in charge, i.e. sodium 3-(diphenylphosphino)benzene sulfonate (TPPMS) and sodium 3,3′,3″-triphenylphosphine sulfonate (TPPTS), respectively, with artificial membranes (black lipid membranes; BLMs) and HeLa cells. The TPPTS-stabilized AuNPs affect BLMs at lower size than TPPMS-stabilized ones. On HeLa cells we found decreasing cytotoxicity with increasing particle size, however, with an overall lower cytotoxicity for TPPTS-stabilized AuNPs. We attribute size-dependent BLM properties as well as reduced cytotoxicity of TPPTS-stabilized AuNPs to weaker shielding of the AuNP core when stabilized with TPPTS. We hypothesize that the partially unshielded hydrophobic gold core can embed into the hydrophobic membrane interior. Thereby we demonstrate that ligand-dependent cytotoxicity of NP can occur even when the NPs are not translocated through the membrane. From the Clinical EditorThe use of nanoparticles (NPs) in the clinical setting means that there will be interactions between NPs and cell membranes. The authors investigated the underlying processes concerning cellular uptake and potential toxicity of gold nanoparticles (AuNPs) using particles with ligands different sizes and charges. The findings should further enhance existing knowledge on future design of safer NPs in the clinic.

ChemInform Abstract: Bilayer Membrane Interactions with Nanofabricated Scaffolds

AbstractReview: 144 refs.

Highly efficient integration of the viral portal proteins from different types of phages into planar bilayers for the black lipid membrane analysis.

The planar lipid bilayer technology is a technique that yields incredibly useful structural function information about a single channel protein. It is also currently actively utilized as a powerful platform using biological protein nanopores for the development of single-molecule nanopore sensing technology, as well as ultrafast DNA sequencing technology. The portal protein, GP10, from the bacteriophage Φ29 was the first phage portal protein shown to be successfully inserted into planar bilayer membranes, thereby it may inspire more researchers to apply the techniques to portal proteins from the other bacteriophages. However, the technology is far from perfect since the insertion of the channel proteins into planar bilayer membranes is not only technically difficult but also time-consuming. For the fusion of phage portal proteins, vesicles are typically needed to be reconstituted with the portal proteins to form proteoliposomes. However, most of the phage portal proteins have low solubility, and may self-aggregate during the preparation of the proteoliposomes. Furthermore, the fusion of the formed proteoliposomes is sporadic, unpredictable and varied from person to person. Due to the lack of experimental consistency between labs, the results from different methodologies reported for generating fusible proteoliposomes are highly variable. In this research, we propose a new method for the preparation of the fusible proteoliposomes containing portal proteins from bacteriophages, to circumvent the problems aforementioned. Compared to the conventional methods, this method was able to avoid the protein aggregation issues during the vesicle preparation by eliminating the need for detergents and the subsequent time-consuming step for detergent removal. The proteoliposomes prepared by the method were shown to be more efficiently and rapidly inserted into planar bilayer membranes bathed in different conducting buffer solutions including those with nonelectrolytes such as glycerol and PEG. In addition, the method of forming proteoliposomes has significantly extended the shelf life of the proteoliposomes. To further explore its potentials, we have successfully applied the method to the insertion of a mutant portal protein, GP20, from T4 bacteriophage, a hydrophobic portal protein that has not been explored using the planar lipid bilayer membrane technique. The results suggest that this method could be used to prepare proteoliposomes formed by hydrophobic portal proteins from other bacteriophages.

Host-Guest Strategy to Reversibly Control a Chloride Carrier Process with Cyclodextrins.

Herein, we report a reversible modular chloride transport process based on host-guest competitive interactions between an imidazolium-based chloride carrier and beta-cyclodextrin. We report evidence for the formation of the supramolecular complex between 1,3-bis(2-(adamantan-1-yl)ethyl)imidazolium bis(trifluorometyl-sulfonyl)imide with two β-cyclodextrins. Through fluorescence assays in liposomes and black lipid membrane experiments, we demonstrate that the formation of the supramolecular complex results in the inhibition of the chloride transport. We show that the chloride transport process can be entirely restored in the presence of competitive adamantyl-functionalized guests. This is the first example of an entirely reversible modular chloride transport process in phospholipid bilayers involving a mobile carrier transporter and cyclodextrin supramolecular complex.

Methacrylate Polymer Scaffolding Enhances the Stability of Suspended Lipid Bilayers for Ion Channel Recordings and Biosensor Development.

Black lipid membranes (BLMs) provide a synthetic environment that facilitates measurement of ion channel activity in diverse analytical platforms. The limited electrical, mechanical and temporal stabilities of BLMs pose a significant challenge to development of highly stable measurement platforms. Here, ethylene glycol dimethacrylate (EGDMA) and butyl methacrylate (BMA) were partitioned into BLMs and photopolymerized to create a cross-linked polymer scaffold in the bilayer lamella that dramatically improved BLM stability. The commercially available methacrylate monomers provide a simple, low cost, and broadly accessible approach for preparing highly stabilized BLMs useful for ion channel analytical platforms. When prepared on silane-modified glass microapertures, the resulting polymer scaffold-stabilized (PSS)-BLMs exhibited significantly improved lifetimes of 23 ± 9 to 40 ± 14 h and > 10-fold increase in mechanical stability, with breakdown potentials > 2000 mV attainable, depending on surface modification and polymer cross-link density. Additionally, the polymer scaffold exerted minimal perturbations to membrane electrical integrity as indicated by mean conductance measurements. When gramicidin A and α-hemolysin were reconstituted into PSS-BLMs, the ion channels retained function comparable to conventional BLMs. This approach is a key advance in the formation of stabilized BLMs and should be amenable to a wide range of receptor and ion channel functionalized platforms.

Bilayer membrane interactions with nanofabricated scaffolds

Membrane function is facilitated by lateral organization within the lipid bilayer, includingphase-separation of lipids into more ordered domains (lipid rafts) and anchoring of the membrane to a cytoskeleton. These features have proven difficult to reproduce in model membrane systems such as black lipid membranes, unilamellar vesicles and supported bilayers. However, advances in micro/nanofabrication have resulted in more realistic synthetic models of membrane-cytoskeleton interactions that can help uncover the design rules responsible for biological membrane formation and organization. This review will focus on describing micro-/nanostructured scaffolds that can emulate the connections of a cellular membrane to an underlying “cytoskeleton”. Examples include molecular-based scaffolds anchored to a solid substrate through surface chemistry, solid-state supports modified by material deposition, lithography and etching, the creation of micro/nanoporous arrays, integration with microfluidics, and droplet-based bilayers at interfaces.Model systems such as theseare increasing our understanding of structure and organization in cell membranes, and how they result in the emergence of functionality at the nanoscale.

A streptococcal lipid toxin induces membrane permeabilization and pyroptosis leading to fetal injury.

Group B streptococci (GBS) are Gram-positive bacteria that cause infections in utero and in newborns. We recently showed that the GBS pigment is hemolytic and increased pigment production promotes bacterial penetration of human placenta. However, mechanisms utilized by the hemolytic pigment to induce host cell lysis and the consequence on fetal injury are not known. Here, we show that the GBS pigment induces membrane permeability in artificial lipid bilayers and host cells. Membrane defects induced by the GBS pigment trigger K+ efflux leading to osmotic lysis of red blood cells or pyroptosis in human macrophages. Macrophages lacking the NLRP3 inflammasome recovered from pigment-induced cell damage. In a murine model of in utero infection, hyperpigmented GBS strains induced fetal injury in both an NLRP3 inflammasome-dependent and NLRP3 inflammasome-independent manner. These results demonstrate that the dual mechanism of action of the bacterial pigment/lipid toxin leading to hemolysis or pyroptosis exacerbates fetal injury and suggest that preventing both activities of the hemolytic lipid is likely critical to reduce GBS fetal injury and preterm birth.

Molecular mechanism of action of chlorogenic acid on erythrocyte and lipid membranes.

The high antioxidant capacity of chlorogenic acid (CGA) in respect to biological systems is commonly known, though the molecular mechanism underlying that activity is not known. The aim of the study was to determine that mechanism at the molecular and cell level, in particular with regard to the erythrocyte and the lipid phase of its membrane. The effect of CGA on erythrocytes and lipid membranes was studied using microscopic, spectrophotometric and electric methods. The biological activity of the acid was determined on the basis of changes in the physical parameters of the membrane, in particular its osmotic resistance and shapes of erythrocytes, polar head packing order and fluidity of erythrocyte membrane as well as capacity and resistivity of black lipid membrane (BLM). The study showed that CGA becomes localized mainly in the outer part of membrane, does not induce hemolysis or change the osmotic resistance of erythrocytes, and induces formation of echinocytes. The values of generalized polarization and fluorescence anisotropy indicate that CGA alters the hydrophilic region of the membrane, practically without changing the fluidity in the hydrophobic region. The assay of electric parameters showed that CGA causes decreased capacity and resistivity of black lipid membranes. The overall result is that CGA takes position mainly in the hydrophilic region of the membrane, modifying its properties. Such localization allows the acid to reduce free radicals in the immediate vicinity of the cell and hinders their diffusion into the membrane interior.

A reusable device for electrochemical applications of hydrogel supported black lipid membranes.

Black lipid membranes (BLMs) are significant in studies of membrane transport, incorporated proteins/ion transporters, and hence in construction of biosensor devices. Although BLMs provide an accepted mimic of cellular membranes, they are inherently fragile. Techniques are developed to stabilize them, such as hydrogel supports. In this paper, we present a reusable device for studies on hydrogel supported (hs) BLMs. These are formed across an ethylene tetrafluoroethylene (ETFE) aperture array supported by the hydrogel, which is during in situ polymerization covalently "sandwiched" between the ETFE substrate and a gold electrode microchip, thus allowing direct electrochemical studies with the integrated working electrodes. Using electrochemical impedance spectroscopy (EIS), X-ray photoelectron spectroscopy and contact angle measurements, we demonstrate the optimized chemical modifications of the gold electrode microchips and plasma modification of the ETFE aperture arrays facilitating covalent "sandwiching" of the hydrogel. Both fluorescence microscopy and EIS were used to demonstrate the induced spontaneous thinning of a deposited lipid solution, leading to formation of stabilized hsBLMs on average in 10 min. The determined specific membrane capacitance and resistance were shown to vary in the range 0.31-0.49 μF/cm(2) and 45-65 kΩ cm(2), respectively, corresponding to partially solvent containing BLMs with an average life time of 60-80 min. The characterized hsBLM formation and devised equivalent circuit models lead to a schematic model to illustrate lipid molecule distribution in hydrogel-supported apertures. The functionality of stabilized hsBLMs and detection sensitivity of the platform were verified by monitoring the effect of the ion transporter valinomycin.

TtOmp85, a β-Barrel Assembly Protein, Functions by Barrel Augmentation

Outer membrane proteins are vital for Gram-negative bacteria and organisms that inherited organelles from them. Proteins from the Omp85/BamA family conduct the insertion of membrane proteins into the outer membrane. We show that an eight-stranded outer membrane β-barrel protein, TtoA, is inserted and folded into liposomes by an Omp85 homologue. Furthermore, we recorded the channel conductance of this Omp85 protein in black lipid membranes, alone and in the presence of peptides comprising the sequence of the two N-terminal and the two C-terminal β-strands of TtoA. Only with the latter could a long-living compound channel that exhibits conductance levels higher than those of the Omp85 protein alone be observed. These data support a model in which unfolded outer membrane protein after docking with its C-terminus penetrates into the transmembrane β-barrel of the Omp85 protein and augments its β-sheet at the first strand. Augmentation with successive β-strands leads to a compound, dilated barrel of both proteins.

Measurement of membrane tension of free standing lipid bilayers via laser-induced surface deformation spectroscopy.

Non-invasive measurement of the membrane tension of free-standing black lipid membranes (BLMs), with sensitivity on the order of μN m(-1), was achieved using laser-induced surface deformation (LISD) spectroscopy. A BLM was vertically formed via the folding method and aqueous phases with different refractive indices were added on each side in order to induce radiation pressure by a laser beam. The dynamic response of the deformed BLMs was measured under periodic intensity modulation and their tensions could be estimated. The dependence of membrane tension on the cholesterol concentration of BLMs composed of phosphatidylcholine and phosphatidylethanolamine was investigated, with the membrane tension increasing from 1.3 μN m(-1) to 68.1 μN m(-1) when the cholesterol concentration increased from zero to 33%. These tension values are much smaller than some of those previously reported, because this method does not suppress membrane fluctuation unlike other conventional methods. Our LISD system can be a promising tool for the measurement of membrane tension in BLMs.

A Microfluidic Device to Study Translocation Across Lipid Membranes

The regulation of protein trafficking across cellular membranes, done by transmembrane proteins, is a vital process known as translocation. However, protein translocation is not completely understood and traditional electrophysiology techniques cannot give an insight into the mechanical properties of translocation. On the other hand, optical tweezers has been shown to be a suitable candidate to study the translocation of soluble proteins but becomes a challenge with transmembrane proteins. Hence there is a need to develop a biophysical tool that allows the study of transmembrane proteins into their membrane environment with optical tweezers.There is an increasing effort to miniaturize black lipid membranes (BLM), and several approaches have now been developed to study the translocation of proteins in miniaturized systems. In this work, we develop a microfluidic system suitable for the study of transmembrane proteins into artificial membranes. The advantages of our approach include: real-time control over the charge gradient across the membrane, dynamic exchange of buffers, and capability to combine with force-spectroscopy techniques.We demonstrate the formation of a free-standing BLM on a glass micro-device by measures of capacitance and electron flux detection through toxin pores. This microfluidic device is combined with a high-resolution optical tweezers for the study of protein translocation across membranes and the evaluation of current translocation models.

Membrane activity of the pentaene macrolide didehydroroflamycoin in model lipid bilayers

Didehydroroflamycoin (DDHR), a recently isolated member of the polyene macrolide family, was shown to have antibacterial and antifungal activity. However, its mechanism of action has not been investigated. Antibiotics from this family are amphiphilic; thus, they have membrane activity, their biological action is localized in the membrane, and the membrane composition and physical properties facilitate the recognition of a particular compound by the target organism. In this work, we use model lipid membranes comprised of giant unilamellar vesicles (GUVs) for a systematic study of the action of DDHR. In parallel, experiments are conducted using filipin III and amphotericin B, other members of the family, and the behavior observed for DDHR is described in the context of that of these two heavily studied compounds. The study shows that DDHR disrupts membranes via two different mechanisms and that the involvement of these mechanisms depends on the presence of cholesterol. The leakage assays performed in GUVs and the conductance measurements using black lipid membranes (BLM) reveal that the pores that develop in the absence of cholesterol are transient and their size is dependent on the DDHR concentration. In contrast, cholesterol promotes the formation of more defined structures that are temporally stable.

The assembly and use of tethered bilayer lipid membranes (tBLMs).

Because they are firmly held in place, tethered bilayer lipid membranes (tBLMs) are considerably more robust than supported lipid bilayers such as black lipid membranes (BLMs) (Cornell et al. Nature 387(6633): 580-583, 1997). Here we describe the procedures required to assemble and test tethered lipid bilayers that can incorporate various lipid species, peptides, and ion channel proteins.

Automated Lipid Membrane Formation Using a Polydimethylsiloxane Film for Ion Channel Measurements

A black lipid membrane (BLM) is a powerful platform for studying the electrophysiology of cell membranes as well as transmembrane proteins. However, BLMs have disadvantages in terms of stability, accessibility, and transportability, which preclude their industrial applications. To resolve these issues, frozen membrane precursor (MP) was devised to improve the transportability and storability of BLMs. As described previously, MP is a storable and transportable platform that can be delivered to the point-of-use, where BLMs are automatically formed upon thawing at room temperature. However, MP has an inconsistent thinning-out time, ranging from 30 min to 24 h, as well as a low success rate of BLM formation (~27%), which make it undesirable for practical use. In our study, polydimethylsiloxane (PDMS) was introduced as a replacement for conventionally used Teflon film to control thinning-out time. As such, we used a PDMS thin-film, a porous-structured hydrophobic polymer, and squalene, a high viscosity solvent, to facilitate membrane formation, whereas the absorption rates of solvents were controlled to achieve consistent BLM formation time. We successfully reduced thinning-out time down to <1 h as well as enhanced the success rate of BLM formation to greater than 80%. Moreover, we demonstrated the feasibility of our platform for use in drug screening using gramicidin A and guanidine.

Emerging trends in precision fabrication of microapertures to support suspended lipid membranes for sensors, sequencing, and beyond

Suspended lipid membranes, also called black lipid membranes (BLMs), are an important model system that approximates the lipid bilayer environment of cell membranes. Increasingly, BLMs are utilized in sensing strategies that harness high sensitivity measurements of ion flux across the membrane, typically facilitated by ion channel proteins. BLMs are suspended across microapertures that connect two otherwise isolated fluidic compartments, and the precision fabrication of such microapertures can contribute to the stability and performance of the resulting BLM. Here, we highlight two emerging trends in the precision fabrication of microapertures for BLM formation: microfabrication in silicon-based thin film substrates, and microfabrication in the negative photoresist material SU-8. Four unique fabrication strategies are outlined, and we project the impact that these microfabrication strategies will have for BLM-integrated bioanalytical technologies.

Inhibition of the human respiratory syncytial virus small hydrophobic protein and structural variations in a bicelle environment.

The small hydrophobic (SH) protein is a 64-amino-acid polypeptide encoded by the human respiratory syncytial virus (hRSV). SH protein has a single α-helical transmembrane (TM) domain that forms pentameric ion channels. Herein, we report the first inhibitor of the SH protein channel, pyronin B, and we have mapped its binding site to a conserved surface of the RSV SH pentamer, at the C-terminal end of the transmembrane domain. The validity of the SH protein structural model used has been confirmed by using a bicellar membrane-mimicking environment. However, in bicelles the α-helical stretch of the TM domain extends up to His-51, and by comparison with previous models both His-22 and His-51 adopt an interhelical/lumenal orientation relative to the channel pore. Neither His residue was found to be essential for channel activity although His-51 protonation reduced channel activity at low pH, with His-22 adopting a more structural role. The latter results are in contrast with previous patch clamp data showing channel activation at low pH, which could not be reproduced in the present work. Overall, these results establish a solid ground for future drug development targeting this important viroporin. Importance: The human respiratory syncytial virus (hRSV) is responsible for 64 million reported cases of infection and 160,000 deaths each year. Lack of adequate antivirals fuels the search for new targets for treatment. The small hydrophobic (SH) protein is a 64-amino-acid polypeptide encoded by hRSV and other paramyxoviruses, and its absence leads to viral attenuation in vivo and early apoptosis in infected cells. SH protein forms pentameric ion channels that may constitute novel drug targets, but no inhibitor for this channel activity has been reported so far. A small-molecule inhibitor, pyronin B, can reduce SH channel activity, and its likely binding site on the SH protein channel has been identified. Black lipid membrane (BLM) experiments confirm that protonation of both histidine residues reduces stability and channel activity. These results contrast with previous patch clamp data that showed low-pH activation, which we have not been able to reproduce.