Bipolar Waveform Research Articles

Electrostatic Solitary Waves in Electronegative Martian Plasma

The solar wind interacts with planetary magnetospheres, generating plasma waves in both the upstream region and the magnetospheric environment. Mars, lacking an inherent magnetic field, has an induced magnetosphere formed through solar wind interaction with its ionosphere. These waves are crucial for momentum and energy exchange within the planetary plasma environment. This study focuses on the existence and dynamics of electrostatic solitary waves (ESWs) in Martian ionospheric plasma, characterized by various flowing ions. We employ a multifluid plasma model incorporating positive (streaming) ions, negative ions, and two distinct kappa-distributed electron populations to study ESW propagation in the Martian ionosphere from first principles. Linear analysis reveals four distinct modes, including a subsonic mode due to the negative-ion beam. Electrostatic waves may become unstable due to a beam instability excited at long wavelengths. Seeking stationary profile solutions, an energy balance equation is obtained in the moving reference frame, and the shape of the solitary wave can thus be predicted numerically. A meticulous analysis reveals that either positive- or negative-polarity ESWs (or both) may occur (simultaneously) in the Martian environment. In addition to conventional bipolar E-field waveforms, our theoretical model predicts the existence of wiggly bipolar pulses (supersolitary waves) and offset bipolar pulses (flat-top solitary waves) in Martian plasma. Comparison of our model’s predictions with real observational plasma parameters indicates that, like Martian magnetosheath plasma, ionospheric plasma may sustain ESWs measuring several tens of millivolts per meter.

First-in-human experience of high-energy ElectroPulse pulsed field ablation: Acute results for pulmonary veins and posterior wall isolation

BackgroundDifferent iterations of catheter and energy delivery system configurations are evolving for pulsed field ablation (PFA); however, some have used large and complex catheters, required large sheaths, and had a recognized risk of hemolysis. ObjectiveThe purpose of this study was to evaluate the acute safety and efficacy of a custom designed 8F variable loop multielectrode mapping and PFA catheter with contact sensing. MethodsThis acute feasibility study recruited 30 patients undergoing de novo ablation of paroxysmal or persistent atrial fibrillation (AF). The ElectroPulse Study is a first-in-human, nonrandomized, prospective study of a novel PFA system that utilizes an 8F, 10-electrode variable loop steerable mapping and ablation catheter with 2800-V biphasic bipolar waveform. All patients had pulmonary vein isolation (PVI) and posterior wall isolation (PWI) using the PFA system. The main outcomes were the acute success of PV/PWI and periprocedural serious adverse events. ResultsComplete PVI/PWI was successfully achieved in all 30 patients using 59.7 ± 7.2 applications. Total procedural time was 113.6 ± 26.3 minutes, fluoroscopy time 8.0 ± 5.5 minutes, and left atrial dwell time 78.7 ± 18.6 minutes. There was no esophageal injury, phrenic nerve palsy, clinical stroke, or death. Brain magnetic resonance imaging detected 2 new but transient silent cerebral lesions. Two patients (6.7%) had vascular access complications. Although there were changes in the biomarkers for hemolysis, none of the patients experienced clinical hemolysis or related acute kidney injury. ConclusionThis first-in-human study demonstrated that PFA using a novel variable loop catheter with a contact sensing system safely achieved 100% acute PVI/PWI with safety profile comparable to existing PFA systems.

Self-repairing Al2O3−TiO2 coatings fabricated through plasma electrolytic oxidation with various cathodic pulse parameters

The influence of cathodic pulse parameters was evaluated on plasma electrolytic oxidation (PEO) coatings grown on 7075 aluminum alloy in a silicate-based electrolyte containing potassium titanyl oxalate (PTO) using pulsed bipolar waveforms with various cathodic duty cycles and cathodic current densities. The coatings were characterized by SEM, EDS, and XRD. EIS was applied to investigate the electrochemical properties. It was observed that the increase of cathodic duty cycle and cathodic current density from 20% and 6 A/dm2 to 40% and 12 A/dm2 enhances the growth rate of the inner layer from 0.22 to 0.75 µm/min. Adding PTO into the bath showed a fortifying effect on influence of the cathodic pulse and the mentioned change of cathodic pulse parameters, resulting in an increase of the inner layer growth rate from 0.25 to 1.10 µm/min. Based on EDS analysis, Si and Ti were incorporated dominantly in the upper parts of the coatings. XRD technique merely detected γ-Al2O3, and there were no detectable peaks related to Ti and Si compounds. However, the EIS results confirmed that the incorporation of Ti4+ into alumina changed the electronic properties of the coating. The coatings obtained from the bath containing PTO using the bipolar waveforms with a cathodic duty cycle of 40% and current density values higher than 6 A/dm2 showed highly appropriate electrochemical behavior during 240 d of immersion due to an efficient repairing mechanism. Regarding the effects of studied parameters on the coating properties, the roles of cathodic pulse parameters and PTO in the PEO process were highlighted.

In-situ incorporation of polydopamine surface modified bioactive glass nanoparticles into a plasma electrolytic oxidation coating on biodegradable AZ31 Mg alloy: A study of bioactivity and corrosion performance

Magnesium alloys are promising candidates for next-generation biodegradable biomaterials. However, their poor corrosion resistance has limited their medical applications. In this study, to improve the bioactivity performance and control the degradation rate of an AZ31 Mg alloy, anodic oxide coatings containing bioactive glass (BG) were created on the alloy using plasma electrolytic oxidation (PEO). First, BG nanoparticles were synthesized through the sol-gel method and surface-modified with polydopamine (BG/PDA). These nanoparticles were then dispersed in an alkaline phosphate electrolyte and incorporated into the coatings grown using unipolar and bipolar waveforms. According to EDS results, incorporation of BG/PDA nanoparticles was higher when the bipolar waveform was applied. Electrochemical impedance spectroscopy revealed that the coatings significantly enhanced the corrosion resistance of the AZ31 Mg alloy, with the BG/PDA nanoparticle-containing coatings demonstrating the lowest degradation rate during long-term immersion. These coatings achieved the highest faradic resistance of ∼ 12 kΩ.cm² after 28 days of immersion. The incorporation of BG and BG/PDA nanoparticles enhanced the bioactivity performance of the coatings, facilitating hydroxyapatite formation on the coating surface. Based on the results, the newly developed BG-coated alloy shows promising potential for biomedical applications.

Commissioning of a modulated pulse-power magnetron sputtering system for depositing niobium thin films

A modulated pulse-power magnetron sputtering system (MPPMS) was commissioned and used to deposit niobium on copper. MPPMS utilizes a modulated pulse train with high peak-to-average energy ratios, thereby increasing the energy density leading to the production of the energetic ions. The MPPMS modulator was designed and constructed based on large voltage/current IGBT modules, which can be externally modulated, produce bi-polar waveforms, and are readily available. A high voltage power supply provides moderate current to the IGBT module to create the precise pulse structure. The MPPMS system was used to deposit ∼1 μm thick, niobium film on a copper substrate held at ∼77 K to minimize Nb atom surface diffusion and maximize intrinsic film energy. The Nb film had an average grain size of ∼8 nm.

P‐86: Prediction of Droplet Behavior in Piezoelectric Inkjet Printing Based on Waveguide Theory

In the present study, we numerically investigate the effect of sub‐pulse addition on the applied voltage waveform on the high‐speed jetting procedure of drop‐on‐demand inkjet printing. The concept of a waveguide was adopted to model the reflective and interference properties of sound waves in complex geometrical layout of the pump structure partially surrounded by the piezoelectric actuator. We proposed a nonlinear model in which the mass is concentrated in points by dividing the fluid column and the connecting duct inside the pump section into equal‐sized volumetric elements. A three‐dimensional finite volume numerical simulation was performed for the solution of the Navier‐Stokes equation based on the volume‐of‐fluid method for tracing the fluid interface. The negative part of the bipolar waveform acts as a suction‐removal residual pressure, suppressing the satellite, while the positive voltage repels the meniscus and separates the liquid from the meniscus. The present method based on waveguide theory was successfully applied to evaluate the effect of multi‐step waveform voltage in terms of maximum velocity, size, satellite generation, ligament length.

Efficacy and safety of pulsed field ablation for accessory pathways: a pilot study.

Radiofrequency ablation is used as a first-line therapy for accessory pathways (APs). However, data regarding the effects of pulsed field ablation (PFA) on APs are limited. We sought to evaluate the acute procedural and 6-month success and safety of PFA in a cohort of patients with APs. A focal contact force-sensing PFA catheter was used for patients with APs. Pulsed field ablation generator generated a bipolar and biphasic waveform (±1000 V) with a duration of 100 ms from the tip of the PFA catheter. A 100% acute procedural success was achieved in 10 conscious patients with APs (7 left anterolateral, 2 left inferolateral, and 1 right posteroseptal APs) including 6 (60%) patients after an initial application. The average total ablation time was 6.3 ± 4.9 s for 4.7 ± 1.8 ablation sites (ASs), including 3.1 ± 2.4 s at targets and 3.2 ± 2.9 s at 3.2 ± 2 bolus ASs. The mean skin-to-skin time was 59.3 ± 15.5 min, and PFA catheter dwell time was 29.4 ± 7.8 min. One patient encountered transient sinus arrest during PFA due to parasympathetic overexcitation. Sinus rhythm was restored in all patients without any significant adverse events during the short-term follow-up. Pulsed field ablation of APs was feasible, effective, and safe. Its efficiency was remarkable for its ultrarapid termination of AP conduction. Further studies are warranted to prove whether utilization of PFA with current parameters can extend to manifold AP ablation.

Electrostatic supersolitary waves: A challenging paradigm in nonlinear plasma science and beyond – State of the art and overview of recent results

A comprehensive overview is presented of recent theoretical advancements and observational manifestations of a relatively new type of electrostatic solitary wave (ESW), known as supersoliton or supersolitary wave (SSW). These nonlinear structures are characterized by a distorted pulse-shaped electrostatic potential excitations, deviating from the standard (“sech2”-like) form generally expected from solitonic pulses. In Space plasmas, in particular, e.g. in magnetospheric observations, SSWs may be associated with a characteristic wiggly bipolar electric field waveform. It has been shown that a three-component configuration is essential, as a minimum requirement for SSWs to occur in a plasma.Various spacecraft missions have recorded evidence of “non-conventional” electrostatic solitary waves (pulses) such as wiggly bipolar pulses, offset bipolar pulses, and monopolar pairs. This review article aims to present the current state of the art in this fascinating new theme, first outlining the basic framework for the modeling of such “exotic” ESWs and then putting forward a correlation between SSW structures with certain non-standard bipolar electric field forms observed in planetary magnetospheres.

Additive Manufacturing for Terahertz Metamaterials on the Dielectric Surface based on Optimized Electrohydrodynamic Drop-on-demand Printing Technology.

The conventional techniques used to fabricate terahertz metamaterials, such as photolithography and etching, face hindrances in the form of high costs, lengthy processing cycles, and environmental pollution. In contrast, electrohydrodynamic (EHD) drop-on-demand (DOD) printing technology holds promise as an additive manufacturing method capable of producing micrometer- and nanometer-scale patterns rapidly and cost-effectively. However, achieving stable large-area printing proves challenging due to issues related to charge accumulation in insulated substrates and inconsistent meniscus vibration. In this paper, a smooth bipolar waveform driving method is proposed aimed at solving the problems of charge accumulation on insulated substrates and poor print consistency. The method involves utilizing driving waveforms with opposite polarities for neighboring droplets, allowing the charges carried by the printed droplets to neutralize each other. Moreover, extending the duration of the high voltage rise and fall times enhances the consistency of meniscus motion, thereby improving the stability of printing. Through optimization of the printing parameters, droplets with a diameter of 1.37 μm and straight lines with a width of 3 μm were printed. Furthermore, this approach was employed to print terahertz metamaterial surface devices, and the performance of the metamaterial is in good agreement with the simulation results. These findings demonstrate that the method greatly improves the stability of EHD DOD printing, thereby advancing the application of the technology in additive processing at the micro- and nanoscale.

Myocardial injury and inflammation following pulsed-field ablation and very high-power short-duration ablation for atrial fibrillation.

Pulmonary vein isolation (PVI) using radiofrequency ablation (RFA) is an established treatment strategy for atrial fibrillation (AF). To improve PVI efficacy and safety, high-power short-duration (HPSD) ablation and pulsed-field ablation (PFA) were recently introduced into clinical practice. This study aimed to determine the extent of myocardial injury and systemic inflammation following PFA, HPSD, and standard RFA using established biomarkers. We included 179 patients with paroxysmal AF receiving first-time PVI with different ablation technologies: standard RFA (30-40 W/20-30 s, n = 52), power-controlled HPSD (70 W/5-7 s, n = 60), temperature-controlled HPSD (90 W/4 s, n = 32), and PFA (biphasic, bipolar waveform, n = 35). High-sensitivity cardiac troponin T (hs-cTnT), creatine kinase (CK),CK MB isoform(CK-MB), and white blood cell (WBC) count were determined before and after ablation. Baseline characteristics were well-balanced between groups (age 63.1 ± 10.3 years, 61.5% male). Postablation hs-cTnT release was significantly higher with PFA (1469.3 ± 495.0 ng/L), HPSD-70W (1322.3 ± 510.6 ng/L), and HPSD-90W (1441.2 ± 409.9 ng/L) than with standard RFA (1045.9 ± 369.7 ng/L; p < .001). CK and CK-MB release was increased with PFA by 3.4-fold and 5.8-fold, respectively, as compared to standard RFA (p < .001). PFA was associated with the lowest elevation in WBC (Δ1.5 ± 1.5 × 109 /L), as compared to standard RFA (Δ3.8 ± 2.5 × 109 /L, p < .001), HPSD-70W (Δ2.7 ± 1.7 × 109 /L, p = .037), and HPSD-90W (Δ3.6 ± 2.5 × 109 /L, p < .001). Among the four investigated ablation technologies, PFA was associated with the highest myocardial injury and the lowest inflammatory reaction.

Effect of electrochemical parameters on wear and tribocorrosion capabilities of the PEO coatings generated through pulsed waveforms on AZ91 magnesium alloy

In this study, PEO coatings were produced on AZ91 Mg alloy using pulsed waveforms at different electrical parameters such as type (unipolar and bipolar), cathodic duty cycle (20 and 40 %), and voltage amplitude (350 and 400 V) to assess wear and tribocorrosion resistance. The coating bath contained NaAl2O4 and NaF. The coating phase composition, microstructure, and chemical composition of the coatings were evaluated using GXRD, SEM, and EDS. Dry wear behavior was studied using the reciprocating ball-on-flat device, while tribocorrosion behavior was evaluated by immersing the coated specimens in 3.5 wt% NaCl solution and reading the OCP before, during, and after sliding. The worn area in both cases was also examined. The results showed that the bipolar waveform with the higher cathodic duty cycle (40 %) provided the best tribocorrosion and wear performance by forming MgF2 (as a corrosion-resistant phase) and MgAl2O4 (as a hard phase). At all three waveforms, the higher coating voltage (i.e. 400 V) enhanced the wear and tribocorrosion resistance by forming thicker coatings with higher amounts of MgF2 and MgAl2O4 phases.

Rapid Detection of Microparticles Using a Microfluidic Resistive Pulse Sensor Based on Bipolar Pulse-Width Multiplexing.

Rapid and accurate analysis of micro/nano bio-objects (e.g., cells, biomolecules) is crucial in clinical diagnostics and drug discovery. While a traditional resistive pulse sensor can provide multiple kinds of information (size, count, surface charge, etc.) about analytes, it has low throughput. We present a unique bipolar pulse-width, multiplexing-based resistive pulse sensor for high-throughput analysis of microparticles. Signal multiplexing is enabled by exposing the central electrode at different locations inside the parallel sensing channels. Together with two common electrodes, the central electrode encodes the electrical signal from each sensing channel, generating specific bipolar template waveforms with different pulse widths. Only one DC source is needed as input, and only one combined electrical output is collected. The combined signal can be demodulated using correlation analysis and a unique iterative cancellation scheme. The accuracy of particle counting and sizing was validated using mixtures of various sized microparticles. Results showed errors of 2.6% and 6.1% in sizing and counting, respectively. We further demonstrated its accuracy for cell analysis using HeLa cells.

Influence of carbon nanotubes on the plasma electrolytic oxidation process of aluminum under “soft” sparking conditions

Plasma electrolytic oxidation of aluminum (PEO) was performed with dispersed multi-walled carbon nanotubes (MWCNTs) into the electrolyte. The effect of the carbon nanotubes concentration, as well as that of the electrical processing conditions, on the PEO process was investigated. From the point of view of the electrical response of the process, results show that the “soft” sparking regime appears earlier in presence of MWCNTs. The process time at which the transition to the “soft” regime occurs decreases linearly with the increase in the MWCNTs concentration. Over a concentration threshold, depending on the applied pulse bipolar current waveform, the PEO process is inhibited. The dispersion of MWCNTs in the electrolyte results in thicker but more porous alumina layers. More specifically, the proportion of the α-alumina phase relative to the γ-alumina phase decreases with the increase in the MWCNTs concentration. Results are explained by considering the increased coating growth kinetics and lower heat accumulation from MWCNTs addition. Finally, the present study gives new insights into the right management of the PEO process under “soft” sparking regime with dispersed carbon-based nanoparticles in the electrolyte.

A fluid model of pulsed direct current planar magnetron discharge

We simulated a pulsed direct current (DC) planar magnetron discharge using fluid model, solving for species continuity, momentum, and energy transfer equations, coupled with Poisson equation and Lorentz force for electromagnetism. Based on a validated DC magnetron model, an asymmetric bipolar potential waveform is applied at the cathode at 50–200 kHz frequency and 50–80% duty cycle. Our results show that pulsing leads to increased electron density and electron temperature, but decreased deposition rate over non-pulsed DC magnetron, trends consistent with those reported by experimental studies. Increasing pulse frequency increases electron temperature but reduces the electron density and deposition rate, whereas increasing duty cycle decreases both electron temperature and density but increases deposition rate. We found that the time-averaged electron density scales inversely with the frequency, and time-averaged discharge voltage magnitude scales with the duty cycle. Our results are readily applicable to modulated pulse power magnetron sputtering and can be extended to alternating current (AC) reactive sputtering processes.

Long-duration bipolar linear transformer driver based on a multi-turn half-bridge structure

All-solid linear transformer driver(LTD) generators are widely used to output unipolar high-voltage rectangular pulses in nanoseconds. However in some applications, the bipolar output is necessary and the size of the generator is limited, which is challenging for LTD topology because the size of the magnetic core is related directly to the amplitude and pulse duration of the output waveforms. In this paper, a bipolar long-duration pulse generator based on the topology of a linear transformer driver combined with a half-bridge and multi-turn structure is put forward. The half-bridge topology can output bipolar waveforms easily and can save the number of switches used in the generator. To eliminate the crosstalk voltage that appears during operation, a differential mode inductance is used to protect the circuit. A snubber circuit is applied to suppress the reverse overshoot. The multi-turn design is chosen to make the size more compact. However, the multi-turn usually leads to a lower rise speed. To improve the performance, an optimization method that improves the rising speed by changing the turns of each stage is discussed. The strategy is useful and can be applied on some other occasions. The generator can output bipolar waveforms whose amplitudes are 4 kV and the duration can be adjusted from 200 ns to 800 ns. The rise time can be limited to 70 ns. The size of the generator is 10 cm * 10 cm * 15 cm, which is compact compared to the generators put forward before.

Next generation CANCAN focusing for remote stimulation by nanosecond electric pulses

Focusing electric pulse effects away from electrodes is a challenge because the electric field weakens with distance. Previously we introduced a remote focusing method based on bipolar cancellation, a phenomenon of low efficiency of bipolar nanosecond electric pulses (nsEP). Superpositioning two bipolar nsEP into a unipolar pulse canceled bipolar cancellation (“CANCAN” effect), enhancing bioeffects at a distance despite the electric field weakening. Here, we introduce the next generation (NG) CANCAN focusing with unipolar nsEP packets designed to produce bipolar waveforms near electrodes (suppressing electroporation) but not at the remote target. NG-CANCAN was tested in CHO cell monolayers using a quadrupole electrode array and labeling electroporated cells with YO-PRO-1 dye. We routinely achieved 1.5–2 times stronger electroporation in the center of the quadrupole than near electrodes, despite a 3–4-fold field attenuation. With the array lifted 1–2 mm above the monolayer (imitating a 3D treatment), the remote effect was enhanced up to 6-fold. We analyzed the role of nsEP number, amplitude, rotation, and inter-pulse delay, and showed how remote focusing is enhanced when re-created bipolar waveforms exhibit stronger cancellation. Advantages of NG-CANCAN include the exceptional versatility of designing pulse packets and easy remote focusing using an off-the-shelf 4-channel nsEP generator.

A portable, programmable, multichannel stimulator with high compliance voltage for noninvasive neural stimulation of motor and sensory nerves in humans

Most neural stimulators do not have a high enough compliance voltage to pass current through the skin. The few stimulators that meet the high compliance voltage necessary for transcutaneous stimulation are typically large benchtop units that are not portable, and the stimulation waveforms cannot be readily customized. To address this, we present the design and validation of a portable, programmable, multichannel, noninvasive neural stimulator that can generate three custom bipolar waveforms at ± 150 V with microsecond temporal resolution. The design is low-cost, open-source, and validated on the benchtop and with a healthy population to demonstrate its functionality for sensory and motor stimulation. Sensory stimulation included electrocutaneous stimulation targeting cutaneous mechanoreceptors at the surface of the skin and transcutaneous nerve stimulation targeting the median nerve at the wrist. Both electrocutaneous stimulation on the hand and transcutaneous stimulation at the wrist can elicit isolated tactile percepts on the hand but changes in pulse frequency are more discriminable for electrocutaneous stimulation. Also, neuromuscular electrical stimulation of the flexor digiti profundus is evoked by applying electrical stimulation directly above the muscle in the forearm and to the median and ulnar nerves in the upper arm. Muscle and nerve stimulation evoked similar grip forces and force rise times, but nerve stimulation had a significantly slower fatigue rate. The development and validation of this noninvasive stimulator and direct comparison of common sensory and motor stimulation targets in a human population constitute an important step towards more widespread use and accessibility of neural stimulation for education and research.

Evidence for fireballs in bipolar HiPIMS plasmas

Using laser Thomson scattering (LTS) and 2D optical imaging, a fireball-like discharge is detected during the positive pulse period of bipolar voltage waveforms, for a circular planar unbalanced magnetron with W target operating in argon. These reverse discharges, excited for positive pulse voltages V pp from 200 to 300 V, sit primarily on the discharge centreline. Their establishment is delayed relative to the initiation of the positive pulse, with the delay time shortening with increased V pp: they are clearly attached to the target (anode in this phase) and have lifetimes extending to the end of the positive pulse. LTS measurements of the electron temperature T e show dramatic electron heating (T e rises from 1 up to 3 eV) both on the discharge centre line and above the racetrack during the fireball event. This is consistent with greater light intensities from the broad band optical imaging of the discharge. In the fireball phase, the LTS measurements also show greatly reduced election densities (by a factor of 5) in the magnetic trap (directly above the racetrack) compared to the unipolar pulse case. The existence of such anodic fireballs is quite possibly an unwanted effect in bipolar HiPIMS.

Design and implementation of a versatile H-bridge power supply for experiments on the STOR-M Tokamak

An H-bridge power supply has been developed for different experiments on the STOR-M tokamak. Four insulated-gate bipolar transistors (IGBTs) are used to guide the current to the load from a capacitor bank discharge. The timing signal to the gates of the IGBTs is controlled by a field programmable gate array (FPGA). The power supply can be programmed to drive either a sinusoidal current waveform to an inductive load or a bipolar rectangular current waveform to a resistive load. The maximum frequency and current tested for the sinusoidal current waveform are 25 kHz and 2200 A, respectively. For bipolar current waveforms, the maximum current tested is 1500 A at 3 kHz. The sinusoidal current to a set of helical coils was used for the Resonant Magnetic Perturbation (RMP) experiments and the bipolar rectangular current waveform was used for both the electrode biasing experiments and the RMP experiments on the STOR-M tokamak.

765 PULSED FIELD ABLATION FOR PULMONARY VEIN ISOLATION: PRELIMINARY RESULTS OF A SINGLE CENTER EXPERIENCE

Abstract Background Pulsed Field Ablation (PFA) is a new and promising non-thermal ablation modality for Pulmonary Vein Isolation (PVI) for the treatment of patients with Atrial Fibrillation (AF). It preferentially ablates myocardial tissue via electroporation leading to minimal effects on surrounding structures. We sought to evaluate safety and efficacy of PFA in our single center experience. Methods PFA was performed at optimized bipolar biphasic waveform using Farapulse system. A protocol of 8 pulses per vein, 4 in the basket configuration and 4 in the flower configuration was followed. The procedure was performed under general anesthesia. Fluoroscopy was used to guide single transseptal puncture. 1 mg of atropine was administered before starting applications. One third of patients underwent CTI ablation using radiofrequency during the same procedure. In one patient we mapped the left atrium before and after ablation using a high-density mapping catheter. Results We prospectively enrolled 21 patients (76% men, age 58,6 ± 9) who underwent PVI using PFA from July to September 2022 for the treatment of Paroxysmal AF (81%) or Persistent AF (19%). Acute pulmonary veins isolation was achieved in the totality of patients. Median skin-to-skin procedure time and catheter dwell time were 56 minutes and 29 minutes respectively. Median fluoroscopy time was 12 minutes. The average number of total applications was 34 ± 4. No adverse events were observed. After a median follow-up of 77 days, we observed early AF recurrence in two patients. Conclusion Preliminary results of our singe center experience confirm that PFA is a safe and effective ablation modality. Pulmonary vein isolation can be achieved very rapidly with short procedural time, catheter dwell time and fluoroscopy time. Further studies are needed to assess durability of the technique.