Biplane Angiography Research Articles

Effectiveness of biplane angiography compared to monoplane angiography for vascular neuro-interventions: a systematic review of the literature

To compare biplane technology to monoplane technology for vascular neuro-intervention. A systematic review of the literature in MEDLINE (via PubMed), Scopus, and ScienceDirect was conducted without date or language restrictions. The Downs and Black quality-assessment checklist was used. The findings of this systematic review were combined with local and Canadian data. The nine articles selected for analysis had a very low level of evidence. The studies report that the biplane system appears to reduce ionising radiation and medical complications as well as shorten procedure time. Most major hospitals in Canada use the biplane system. The biplane system could improve the operator's confidence, which could translate into reduced risk, especially for more complex procedures. The superiority of the biplane system cannot be scientifically proven based on the data in the literature. Nevertheless, given the advantages that a biplane system can provide in terms of safety, quality of care, support to university teaching programmes based on best practices, enhanced capability in performing complex procedures, this technology should be implemented with a responsibility to collect outcome data to optimise the clinical protocol regarding the dose of ionising radiation delivered.

Analysis of Radiation Doses and Dose Reduction Strategies During Cerebral Digital Subtraction Angiography.

Adverse effects of increased use of cerebral digital subtraction angiography (DSA) include radiation-induced skin reactions and increased risk of malignancy. This study aimed to identify a method for reducing radiation exposure during routine cerebral DSA. A retrospective review of 138 consecutive adult patients who underwent DSA with a biplane angiography system (Artis Zee, Siemens, Germany) from September 2015 to February 2016 was performed. In January 2016, the dose parameter was reset by the manufacturer from 2.4 μGy to 1.2 μGy. Predose (group 1) and postdose parameter reduction (group 2) groups were established. Angiograms and procedure examination protocols were reviewed according to patient age, gender, and diagnosis and angiography techniques were reviewed on the basis of the following radiation dose parameters: fluoroscopy time, reference point air kerma (Ka,r; in mGy), and kerma-area product (PKA; in μGym2). The mean Ka,r values in groups 1 and 2 were 1841.5 mGy and 1274.8 mGy, respectively. The mean PKA values in groups 1 and 2 were 23212.5 μGym2 and 14854.0 μGym2, respectively. Ka,r and PKA values were significantly lower in group 2 compared with group 1 (P < 0.001). Among individual factors, young age was a determining factor for reduced fluoroscopy time (P < 0.001), Ka,r (P=0.047), and PKA (P= 0.022). Increased awareness of radiation risks, as well as the establishment of strategies to reduce radiation dose, led to lower radiation doses for DSA. The use of appropriate examinations and low-dose parameters in fluoroscopy contributed significantly to the radiation dose reductions.

VP192 Importance Of Contextual Data In Producing Health Technology Assessment Recommendations

INTRODUCTION:Available data in the scientific literature is not always sufficient to make a clear Health Technology Assessment (HTA) recommendation without any other source of data. Contextual data and local expertize are an important source of data that cannot be ignored in HTA process. Despite a lack of evidence in the scientific literature, a technology can be recommended in a given context. We illustrate this by a case study about biplane angiography for vascular neurointervention.METHODS:A systematic review was conducted. The level of evidence was assessed by the grid of Downs and Black. An analysis of the context in our setting was also conducted. The main outcomes were: radiation doses, clinical complications, procedure times, purchase cost, impact on teaching programs, confidence of clinicians in the technology, quality of care, and volume of activity. A committee constituted of managers, clinical experts, physicians, physicists and HTA experts was created to produce a recommendation about biplane technology acquisition.RESULTS:A list of 257 citations was obtained yielding 9 eligible articles for analysis. Despite the lack of evidence found in the literature (median of Downs and Black: 3/32), the biplane system appears to reduce ionizing radiation and medical complications as well as shorten procedure time. Contextual data indicated that biplane system could improve operator's confidence, which could translate into reduced risk, especially for complex procedures. We estimate that a minimum of 50 cases can be done in our context (University hospital center covering a population of 306,322 people) with a higher level of patient safety. In addition, the biplane system can support our institution in advanced procedures teaching program.CONCLUSIONS:Given on the advantages provided by the biplane technology in our setting, the committee has recommended its acquisition. However, this technology should be implemented with a responsibility in collecting outcome data to optimize clinical protocol in doses of ionizing delivered.

Impact of cavotricuspid isthmus morphology in CRYO versus radiofrequency ablation of typical atrial flutter

Objectives. Cryoablation (CRYO) is an alternative to radiofrequency (RF) for catheter ablation of cavotricuspid isthmus (CTI)-dependent atrial flutter (AFL). We aimed to study whether different CTI morphologies had different impacts on procedural success for CRYO and RF. Design. This study randomized 153 patients with CTI-dependent AFL (median age 65 years; range 34–82) to RF or CRYO (78 CRYO; 75 RF). Biplane angiography (RAO 30° and LAO 60°) was done before the ablation procedure and isthmuses were classified as straight (n = 81), concave (n = 43) or pouch-like (n = 29). RF was performed with a 3.5-mm open-irrigated tip catheter and CRYO was performed with a 9 F, 8-mm tip catheter. The ablation endpoint was bidirectional block of CTI. Results. Acute procedural success was achieved in 70/75 patients in the RF group and in 72/78 patients in the CRYO group. With regard to CRYO or RF, acute procedural success rates were similar between the three isthmus types: straight: CRYO (92%) and RF (96%); concave: CRYO (92%) and RF (94%); and pouch-like: CRYO (94%) and RF (85%). There were no significant differences regarding success rate between the different morphologies in the CRYO or the RF group. The CTI was longer in patients with acute failure compared to the patients with acute success (38 ± 7 mm versus 33 ± 6 mm, p = 0.045). Conclusion. The CTI morphology did not influence the acute success rate for either the CRYO or the RF ablation of CTI-dependent AFL. A longer CTI was associated with a lower success rate regardless of energy source.

Three-dimensional rotational angiography in children with an aortic coarctation.

BackgroundChildren with aortic coarctations (CoA) are increasingly percutaneously treated. Good visualisation of the CoA is mandatory and can be obtained with three-dimensional rotational angiography (3DRA). This study aims to compare the diagnostic and therapeutic additional value of 3DRA with conventional biplane angiography (CA) in children with a CoA.MethodsPatients undergoing percutaneous treatment of CoA with balloon angioplasty (BA) or stent between 2003 and 2015, were retrospectively reviewed on success rate, complications, radiation and technical settings. Diagnostic quality of CA and 3DRA and additional value of 3DRA were scored.ResultsIn total, 134 patients underwent 183 catheterisations, 121 CA and 62 3DRA-guided. Median age was 0.52 years in the BA group and 11.19 years in the stent group. 3DRA was superior to CA in displaying the left ventricle (p = 0.008), ascending aorta (p < 0.001), aortic arch (p = 0.005) and coronary arteries (p < 0.001). In the BA group, 3DRA had a significantly higher success rate than CA (100.0 % versus 68.9 %, p = 0.016). All stent interventions were successful. Complication rates did not differ significantly. The median total dose area product did not significantly differ between CA and 3DRA in the BA (27.88 μGym2/kg versus 15.81 μGym2/kg, p = 0.275) or stent group (37.34 μGym2/kg versus 45.24 μGym2/kg, p = 0.090). 3DRA was of additional value in 96.8 % of the interventions.Conclusions3DRA is superior to CA in diagnostic quality and not associated with increased radiation exposure. It provides high additional value in guiding CoA related interventions.Electronic supplementary materialThe online version of this article (doi: 10.1007/s12471-016-0899-2) contains supplementary material, which is available to authorized users.

Patient doses in a biplane angiography system

Introduction The development of biplane angiography systems is a huge advance in neurointerventional procedures but also a possible increase in patient doses. Purpose This work aims to evaluate dosimetric parameters associated with doses to patients during the first year of use of a biplane angiography system Materials and methods The angiography system analyzed was a Siemens Artist Zee biplane. Intervention’s parameters were obtained by means of the radiation dose structured report. 358 interventions were analyzed according to the following parameters: radiation time, skin dose, dose at interventional reference point and dose-area product (DAP). Average (±95% CI) and the maximum values of each data series were obtained Results On average, each intervention needed 39:03 ±4:05 min of radiation time (71.2% due to plane A) with a maximum value of 7:12:34 h. DAP was, on average, 136 ±11 Gycm2 (80.8% due to plane A) with a maximum of 1435 Gycm2. Patient skin dose was, on average, 0.55 ± 0.07 Gy for plane A and 0.51 ± 0.09 Gy for plane B with maximum values of 4.24 Gy (plane A) and 4.20 Gy (plane B) Conclusion Patient doses from a biplane angiography system are evaluated. Results show patient dose values significantly greater than those obtained in other interventional procedures. DAP and irradiation time were considerably higher for the plane A (usually craniocaudal). However, the skin dose for both planes shows similar values. Disclosure The authors declare that they have no conflicts of interest.

Percutaneous thoracolumbar decompression combined with percutaneous pedicle screw fixation and fusion: a method for treating spinal degenerative pain in a biplane angiography suite with the avoidance of general anesthesia.

Spondylytic degeneration of the axial lumbar spine is a major cause of pain and disability. Recent advances in spinal surgical instrumentation, including percutaneous access and fusion techniques, have made possible the performance of instrumented fusion through small incisions. By blending strategies of interventional pain management, neuroradiology, and conventional spine surgery, it is now feasible to treat spinal axial pain using permanent fixation techniques and local anesthesia in the setting of a fluoroscopy suite using mild sedation and local anesthesia. The author presents a series of percutaneous thoracolumbar fusion procedures performed in a biplane neuroangiographic suite and without general anesthesia for the treatment of spondylytic pain. All procedures utilized pedicle screw fixation, harvesting of local bone autograft, and application of bone fusion material. In this series of 13 patients, a statistically significant reduction of pain was seen at both the 2-week post-operative timepoint, as well as at the time of longest follow-up (mean 40 weeks). The advanced and rapid imaging capabilities afforded by a neuroangiographic suite can be safely combined with percutaneous fusion techniques so as to allow for fusion therapies to be applied to patients where the avoidance of general anesthesia is desirable.

3D Printed Cardiac Phantom for Procedural Planning of a Transcatheter Native Mitral Valve Replacement.

After performing the mock-procedure on the cardiac phantom, the cardiologists optimized their transapical surgical approach. The mitral valve stenosis and calcification were clearly visible. The phantom was used to inform the sizing of the valve to be implanted. With advances in image processing and 3D printing technology, it is possible to create realistic patient-specific phantoms which can act as a guide for the interventional team. Using 3D printed phantoms as a valve sizing method shows potential as a more informative technique than typical CTA reconstruction alone.

A method to reduce patient's eye lens dose in neuro-interventional radiology procedures

Abstract Complex and prolonged neuro-interventional radiology procedures using the biplane angiography system increase the patient's risk of radiation-induced cataract. Physical collimation is the most effective way of reducing the radiation dose to the patient's eye lens, but in instances where collimation is not possible, an attenuator may be useful in protecting the eyes. In this study, an eye lens protector was designed and fabricated to reduce the radiation dose to the patients’ eye lens during neuro-interventional procedures. The eye protector was characterised before being tested on its effectiveness in a simulated aneurysm procedure on an anthropomorphic phantom. Effects on the automatic dose rate control (ADRC) and image quality are also evaluated. The eye protector reduced the radiation dose by up to 62.1% at the eye lens. The eye protector is faintly visible in the fluoroscopy images and increased the tube current by a maximum of 3.7%. It is completely invisible in the acquisition mode and does not interfere with the clinical procedure. The eye protector placed within the radiation field of view was able to reduce the radiation dose to the eye lens by direct radiation beam of the lateral x-ray tube with minimal effect on the ADRC system.

Cryo-Balloon Catheter Localization Based on a Support-Vector-Machine Approach.

Cryo-balloon catheters have attracted an increasing amount of interest in the medical community as they can reduce patient risk during left atrial pulmonary vein ablation procedures. As cryo-balloon catheters are not equipped with electrodes, they cannot be localized automatically by electro-anatomical mapping systems. As a consequence, X-ray fluoroscopy has remained an important means for guidance during the procedure. Most recently, image guidance methods for fluoroscopy-based procedures have been proposed, but they provide only limited support for cryo-balloon catheters and require significant user interaction. To improve this situation, we propose a novel method for automatic cryo-balloon catheter detection in fluoroscopic images by detecting the cryo-balloon catheter's built-in X-ray marker. Our approach is based on a blob detection algorithm to find possible X-ray marker candidates. Several of these candidates are then excluded using prior knowledge. For the remaining candidates, several catheter specific features are introduced. They are processed using a machine learning approach to arrive at the final X-ray marker position. Our method was evaluated on 75 biplane fluoroscopy images from 40 patients, from two sites, acquired with a biplane angiography system. The method yielded a success rate of 99.0% in plane A and 90.6% in plane B, respectively. The detection achieved an accuracy of 1.00 mm±0.82 mm in plane A and 1.13 mm±0.24 mm in plane B. The localization in 3-D was associated with an average error of 0.36 mm±0.86 mm.

4D interventional device reconstruction from biplane fluoroscopy.

Biplane angiography systems provide time resolved 2D fluoroscopic images from two different angles, which can be used for the positioning of interventional devices such as guidewires and catheters. The purpose of this work is to provide a novel algorithm framework, which allows the 3D reconstruction of these curvilinear devices from the 2D projection images for each time frame. This would allow creating virtual projection images from arbitrary view angles without changing the position of the gantries, as well as virtual endoscopic 3D renderings. The first frame of each time sequence is registered to and subtracted from the following frame using an elastic grid registration technique. The images are then preprocessed by a noise reduction algorithm using directional adaptive filter kernels and a ridgeness filter that emphasizes curvilinear structures. A threshold based segmentation of the device is then performed, followed by a flux driven topology preserving thinning algorithm to extract the segments of the device centerline. The exact device path is determined using Dijkstra's algorithm to minimize the curvature and distance between adjacent segments as well as the difference to the device path of the previous frame. The 3D device centerline is then reconstructed using epipolar geometry. The accuracy of the reconstruction was measured in a vascular head phantom as well as in a cadaver head and a canine study. The device reconstructions are compared to rotational 3D acquisitions. In the phantom experiments, an average device tip accuracy of 0.35 ± 0.09 mm, a Hausdorff distance of 0.65 ± 0.32 mm, and a mean device distance of 0.54 ± 0.33 mm were achieved. In the cadaver head and canine experiments, the device tip was reconstructed with an average accuracy of 0.26 ± 0.20 mm, a Hausdorff distance of 0.62 ± 0.08 mm, and a mean device distance of 0.41 ± 0.08 mm. Additionally, retrospective reconstruction results of real patient data are presented. The presented algorithm is a novel approach for the time resolved 3D reconstruction of interventional devices from biplane fluoroscopic images, thus allowing the creation of virtual projection images from arbitrary view angles as well as virtual endoscopic 3D renderings. Availability of this technique would enhance the ability to accurately position devices in minimally invasive endovascular procedures.

Dual-Axis Rotational Angiography is Safe and Feasible to Detect Coronary Allograft Vasculopathy in Pediatric Heart Transplant Patients: A Single-Center Experience.

Coronary allograft vasculopathy (CAV) is the leading cause of graft failure in pediatric heart transplant recipients, also adding to mortality in this patient population. Coronary angiography is routinely performed to screen for CAV, with conventional single-plane or bi-plane angiography being utilized. Dual-axis rotational coronary angiography (RA) has been described, mostly in the adult population, and may offer reduction in radiation dose and contrast volume. Experience with this in the pediatric population is limited. This study describes a single-institution experience with RA for screening for CAV in pediatric patients. The catheterization database at our institution was used to identify pediatric heart transplant recipients having undergone RA to screen for CAV. Procedural data including radiation dose, fluoroscopy time, contrast volume, and procedure time were collected for each catheterization. The number of instances in which RA was not successful, ECG changes were present, and CAV was detected were also collected for each catheterization. A total of 97 patients underwent 345 catheterizations utilizing RA. Median radiation dose-area product per kilogram was found to be 341.7 (mGy cm(2)/kg), total air kerma was 126.8 (mGy), procedure time was 69 min, fluoroscopy time was 9.9 min, and contrast volume was 13 ml. A total of 17 (2 %) coronary artery injections out of 690 could not be successfully imaged using RA. A total of 14 patients had CAV noted at any point, 10 of whom had progressive CAV. Electrocardiographic changes were documented in a total of 10 (3 %) RA catheterizations. Procedural characteristics did not differ between serial catheterizations. RA is safe and feasible for CAV screening in pediatric heart transplant recipients while offering coronary imaging in multiple planes compared to conventional angiography.

Clinical Utility of Angiographic CT with a Flat-detector Angiographic System during Endovascular Procedure.

ObjectiveWe evaluated the feasibility of angiographic computed tomography (ACT) for visualizing stent material in patients who underwent intracranial or extracranial stent placement to treat atherosclerotic lesions or stent assisted coil embolization.Materials and MethodsWe performed intrarterial and intravenous ACT on biplane angiography system equipped with flat panel detectors (Axiom Arits dBA; Siemens Medical Solutions, Forchheim, Germany). Vistipaque 320 was injected for contrast medium, total 150 mL at flow rate of 5 mL/s through artery and 77 mL at flow rate of 3.5 mL/s through vein.ResultsACT is a new imaging modality that provides a clear visualization of stent strut.ConclusionTherefore this new application has potential to become the noninvasive option for follow-up after endovascular surgery using stents.

Influence of the Accuracy of Angiography-Based Reconstructions on Velocity and Wall Shear Stress Computations in Coronary Bifurcations: A Phantom Study.

IntroductionWall shear stress (WSS) plays a key role in the onset and progression of atherosclerosis in human coronary arteries. Especially sites with low and oscillating WSS near bifurcations have a higher propensity to develop atherosclerosis. WSS computations in coronary bifurcations can be performed in angiography-based 3D reconstructions. It is essential to evaluate how reconstruction errors influence WSS computations in mildly-diseased coronary bifurcations. In mildly-diseased lesions WSS could potentially provide more insight in plaque progression.Materials MethodsFour Plexiglas phantom models of coronary bifurcations were imaged with bi-plane angiography. The lumens were segmented by two clinically experienced readers. Based on the segmentations 3D models were generated. This resulted in three models per phantom: one gold-standard from the phantom model itself, and one from each reader. Steady-state and transient simulations were performed with computational fluid dynamics to compute the WSS. A similarity index and a noninferiority test were used to compare the WSS in the phantoms and their reconstructions. The margin for this test was based on the resolution constraints of angiography.ResultsThe reconstruction errors were similar to previously reported data; in seven out of eight reconstructions less than 0.10 mm. WSS in the regions proximal and far distal of the stenosis showed a good agreement. However, the low WSS areas directly distal of the stenosis showed some disagreement between the phantoms and the readers. This was due to small deviations in the reconstruction of the stenosis that caused differences in the resulting jet, and consequently the size and location of the low WSS area.DiscussionThis study showed that WSS can accurately be computed within angiography-based 3D reconstructions of coronary arteries with early stage atherosclerosis. Qualitatively, there was a good agreement between the phantoms and the readers. Quantitatively, the low WSS regions directly distal to the stenosis were sensitive to small reconstruction errors.

Three-Dimensional Rotational Angiography in the Pediatric Cath Lab: Optimizing Aortic Interventions.

The aim of this study was to evaluate usability and accuracy of three-dimensional rotational angiography (3DRA) during interventions of the aorta in congenital heart disease (CHD). 3DRA is an accurate, encompassing and fast imaging technique in the cath lab. However, there is only few published data about its use during interventions in CHD. Between January 2010 and January 2014, 3DRA was performed in 77 patients with aortic issues: in 65 % cases, an intervention was performed, of which 72 % had aortic isthmus stenosis. Data were obtained retrospectively. The accuracy of 3DRA was evaluated on the basis of comparative measurements (n = 60) of the aortic diameter between 3DRA and conventional biplane angiography. Measurements presented a high accuracy with an average deviation of 3.89 % [±3 %] and a significant correlation of r = 0.99 after Pearson (p < 0.0001). Clinical benefit was assessed using a five-point Likert scale and could be shown in 98 %. Comparison with a control group showed a reduced fluoroscopy time from 10.2 to 8.30 min (median, p < 0.01) and decreased radiation dose of 0.18 compared to 0.56 Gy cm(2)/kg (median, p < 0.02). The use of 3DRA in patients with aortic anomalies has advantages in comparison with conventional angiography. It improves diagnostic accuracy, and 3D guidance enables a faster and simplified intervention with enhanced patients' safety and the potential to reduce radiation dose.

23. Does the maximum allowable contrast dose (MACD) predict the risk of contrast induced nephropathy (CIN) in patients with chronic kidney disease (CKD)

Background CIN is associated with high in-hospital mortality. Some studies recommend the utilization of the MACD formula to guide safe contrast dosing, however the evidence supporting use of this measure is limited. Objective The purpose of this study was to determine if MACD is helpful in predicting the risk of CIN in patients with CKD. Methods 8670 patients who underwent coronary angiography in our center with or without Percutaneous Coronary Intervention (PCI) (2008–2013) were included. Patients with CKD ( n = 144) were selected. Patients in shock, on intra aortic balloon pump, on prophylactic hemofiltration or on dialysis were excluded. Creatinine was measured 48–72 h post procedure. T-test, Chi-Square and multiple regression were used to compare those patients who developed CIN and those who did not develop CIN. CIN was defined as an increase in serum creatinine by ⩾25% or 0.5mg/dL from baseline within 48–72 h after contrast exposure. Results CIN occurred in 28 patients (19.4%). Only 8 (5.6%) of the 144 patients exceeded MACD and 2 of these patients developed CIN. The use of biplane angiography explains the lower contrast dose. For this reason the impact of exceeding MACD could not be evaluated. Primary PCI was associated with CIN ( p = 0.012; OR 5.1)). Conclusion Overall it is best to limit contrast dose to the extent possible as this is a known risk factor, however MACD is not a useful variable in a risk model for predicting CIN in our population. Primary PCI was the only predictor of CIN in our population.

Radiation dose reduction during neurointerventional procedures by modification of default settings on biplane angiography equipment

BackgroundNeurointerventional procedures represent a significant source of ionizing radiation. We sought to assess the effect during neurointerventional procedures of varying default rates of radiation dose in fluoroscopy (F) and image...

The Utility of Dual-Energy Computed Tomographic Angiography for the Evaluation of Brain Aneurysms After Surgical Clipping: A Prospective Study

The purpose of this prospective study was to compare a novel dual-energy computed tomographic angiography (DECTA) method for postoperative assessment of clipped brain aneurysms to detect aneurysm remnants and parent artery patency, with catheter-based digital subtraction angiography (DSA). Patients who underwent microsurgical cerebral aneurysm repair were prospectively evaluated after surgery by both DECTA and conventional DSA. CTA was performed using a novel dual-energy method with single source and fast kilovoltage switching (Gemstone Spectral Imaging [GSI]). DSA was performed using biplanar cerebral angiography. An experienced neuroradiologist and a neurosurgeon, both blinded to the original radiologic results, reviewed the images. On DSA, 8 of 15 aneurysms (53%) had a remnant after clipping. All of these remnants were <2 mm except for 1. The only residual aneurysm >2 mm was clearly detected by GSI CTA. Of those 7 DSA-confirmed <2-mm remnants, 5 were detected by GSI CTA. Metal artifacts compromised the image quality in 2 patients. The sensitivity and specificity of GSI CTA for remnant aneurysm <2-mm detection in single clip-treated patients were 100%. In all patients, these were 71.4 % and 100%, respectively. GSI CTA was 100% sensitive and 77% specific to detect parent vessel compromise, with associated positive and negative predictive values of 60% and 100%, respectively. DECTA is a promising noninvasive alternative to conventional catheter-based angiography for identification of aneurysm remnants and assessment of adjacent arteries after surgical clipping of brain aneurysms treated by 2 or fewer clips. It allows for a more rapid image acquisition than DSA, is more cost effective, and is widely available at clinical centers.

Endovascular Recanalization in Acute Ischemic Stroke Using the Solitaire FR Revascularization Device with Adjunctive C-Arm CT Imaging.

In this clinical report, we examined a single-center experience by using the Solitaire FR Revascularization Device in the treatment of acute ischemic stroke in which there was poor initial visualization of the occluded arterial branches by using biplanar cerebral angiography. In all cases, adjunctive C-arm CT was used during the deployment of the thrombectomy device to gain additional information regarding device placement and expansion. Outcome measures included the extent of reperfusion, posttreatment changes in NIHSS scores, posttreatment TICI scores, cerebral hemorrhage, and survival. Clot removal with successful arterial recanalization was achieved in 15/18 cases (83.3%) with TICI scores of 2b/3 in all patients who had initial recanalization. The NIHSS score improved, on average, from 19 pretreatment to 11 posttreatment, and 72% of patients survived. In cases of acute stroke in which there is little information available regarding the positioning and deployment of a retrievable stent during mechanical thrombectomy, the use of C-arm CT may provide more information about device placement across an area of thrombus.

C-arm flat detector computed tomography parenchymal blood volume imaging: the nature of parenchymal blood volume parameter and the feasibility of parenchymal blood volume imaging in aneurysmal subarachnoid haemorrhage patients.

C-arm flat detector computed tomography (FDCT) parenchymal blood volume (PBV) measurements allow assessment of cerebral haemodynamics in the neurointerventional suite. This paper explores the feasibility of C-arm computed tomography (CT) PBV imaging and the relationship between the C-arm CT PBV and the MR-PWI-derived cerebral blood volume (CBV) and cerebral blood flow (CBF) parameters in aneurysmal subarachnoid haemorrhage (SAH) patients developing delayed cerebral ischemia (DCI). Twenty-six patients with DCI following aneurysmal SAH underwent a research C-arm CT PBV scan using a biplane angiography system and contemporaneous MR-PWI scan as part of a prospective study. Quantitative whole-brain atlas-based volume-of-interest analysis in conjunction with Pearson correlation and Bland-Altman tests was performed to explore the agreement between C-arm CT PBV and MR-derived CBV and CBF measurements. All patients received medical management, while eight patients (31%) underwent selective intra-arterial chemical angioplasty. Colour-coded C-arm CT PBV maps were 91% sensitive and 100% specific in detecting the perfusion abnormalities. C-arm CT rPBV demonstrated good agreement and strong correlation with both MR-rCBV and MR-rCBF measurements; the agreement and correlation were stronger for MR-rCBF relative to MR-rCBV and improved for C-arm CT PBV versus the geometric mean of MR-rCBV and MR-rCBF. Analysis of weighted means showed that the C-arm CT PBV has a preferential blood flow weighting (≈ 60% blood flow and ≈ 40% blood volume weighting). C-arm CT PBV imaging is feasible in DCI following aneurysmal SAH. PBV is a composite perfusion parameter incorporating both blood flow and blood volume weightings. That PBV has preferential (≈ 60%) blood flow weighting is an important finding, which is of clinical significance when interpreting the C-arm CT PBV maps, particularly in the setting of acute brain ischemia.