Biosorption Process Research Articles

Sustainable Processes of Biosorption of Pb(II) Ions from Synthetic Wastewater Using Waste Biomass from Mullein Leaves

The aim of this study is to evaluate mullein (Verbascum thapsus) as a cost-effective and sustainable adsorbent for the biosorption of Pb(II) ions from synthetic wastewater samples. Biosorption of mullein was investigated as a function of initial Pb(II) concentration (25–400 mg L−1), biosorbent dosage (2–20 g L−1), solution pH (3–7), and contact time (10–120 min). Mullein as a material with a high affinity for Pb(II) ions had a biosorption efficiency of 98.56% under the optimal conditions: pH 6, initial concentration of Pb(II) at 100 mg L−1, contact time of 90 min, and biosorbent dosage of 20 g L−1. The FTIR spectra of mullein leaves showed that oxygen-containing functional groups on the surface are potentially active sites for the biosorption of Pb(II) ions. EDS analysis and the pHPZC value confirmed the adsorption of Pb(II) ions at the active sites of the mullein. Kinetic and isotherm data enabled insights into the modes of Pb(II) biosorption on the mullein surface which were best explained with the pseudo-second-order kinetic model and the Freundlich adsorption isotherm. Biosorption occurs on the mullein surface via multilayer adsorption. The reusability of mullein showed that the native biosorbents can be reused five times, showing the economic and sustainable benefit of this low-cost biosorbent material.

A novel biosorbent material from waste fish scales (Cyprinus carpio) for biosorption of toxic dyes in aquatic environments

AbstractPolluted water sources are a growing concern in our world today, with more and more of our precious freshwater sources becoming contaminated. Pollution can come from a variety of sources, such as industrial discharge, agricultural runoff, and even urban runoff. Several treatment technologies have been investigated, mainly for dye pollution from textile and industrial wastes. In this study, the biosorption of methylene blue dye from the water environment was examined utilizing a low-cost and biodegradable biomaterial. Waste fish scales modified with NaOH were used as biomaterial. The biosorption effect of methylene blue concentration and pH variables was optimized. SEM for the surface morphology of the biomaterial and FT-IR analyses for the detection of functional groups were performed. The characterization of methylene blue biosorption was conducted to fully understand its nature, including its kinetics, equilibrium, and thermodynamic works. It has been determined that the biosorption process conforms most closely to the pseudo-second-order kinetic model for its kinetic results and to the Langmuir isotherm for its equilibrium results. Based on the Langmuir isotherm data, the maximum capacity for biosorption (qmax) was found to be 344.82 mg g−1. The thermodynamic results showed that the process of biosorption of methylene blue on various surfaces is spontaneous and occurs via physisorption. Additionally, the experimental design method was utilized to determine the optimum conditions of the methylene blue biosorption process under various conditions. The maximum biosorption capacity was determined to be 102.367 mg g−1 at the optimal conditions. The potential of biosorbent derived from the waste fish scales is promising as a novel biosorbent material due to its unique surface morphology and high biosorption capacity.

Algal-biochar and Chlorella vulgaris microalgae: a sustainable approach for textile wastewater treatment and biodiesel production

Microalgae technology is a viable solution for environmental conservation (carbon capture and wastewater treatment) and energy production. However, the nutrient cost, slow-kinetics, and low biosorption capacity of microalgae hindered its application. To overcome them, algal-biochar (BC) can be integrated with microalgae to treat textile wastewater (TWW) due to its low cost, its ability to rapidly adsorb pollutants, and its ability to serve as a nutrient source for microalgal-growth to capture CO2 and biodiesel production. Chlorella vulgaris (CV) and algal-BC were combined in this work to assess microalgal growth, carbon capture, TWW bioremediation, and biodiesel production. Results showed the highest optical density (3.70 ± 0.07 OD680), biomass productivity (42.31 ± 0.50 mg L−1 d−1), and dry weight biomass production (255.11 ± 6.01 mg L−1) in an integrated system of CV-BC-TWW by capturing atmospheric CO2 (77.57 ± 2.52 mg L−1 d−1). More than 99% bioremediation (removal of MB-pollutant, COD, nitrates, and phosphates) of TWW was achieved in CV-BC-TWW system due to biosorption and biodegradation processes. The addition of algal-BC and CV microalgae to TWW not only enhanced the algal growth but also increased the bioremediation of TWW and biodiesel content. The highest fatty acid methylesters (biodiesel) were also produced, up to 76.79 ± 2.01 mg g−1 from CV-BC-TWW cultivated-biomass. Biodiesel’s oxidative stability and low-temperature characteristics are enhanced by the presence of palmitoleic (C16:1) and linolenic (C18:3) acids. Hence, this study revealed that the integration of algal-biochar, as a biosorbent and source of nutrients, with living-microalgae offers an efficient, economical, and sustainable approach for microalgae growth, CO2 fixation, TWW treatment, and biodiesel production.Graphical

Impact of Biosorption Process on Industrial Waste Water Treatment in Panipat District, Haryana

Abstract: In this research paper, I have thoroughy described about the topic “Impact of Biosorption Process on Industrial Waste Water Treatment in Panipat District, Haryana.” The industrial wastewater pollution plaguing Panipat District, Haryana, poses a complex environmental challenge due to the diverse range of industrial activities in the region, including textiles, petrochemicals, and leather processing. This pollution, characterized by the discharge of heavy metals, dyes, organic compounds, and other contaminants into water bodies, threatens both aquatic ecosystems and public health. Conventional physical and chemical treatments have proven inadequate or environmentally harmful, necessitating the exploration of ecofriendly alternatives. Biosorption, a biotechnological method employing live or dead biomass to remove pollutants from wastewater, emerges as a promising solution owing to its cost-effectiveness, efficiency, and low environmental impact. This study explores the efficacy of biosorption techniques in mitigating industrial wastewater pollution in Panipat District, evaluating various biosorbents' performance and efficiency in pollutant removal. Results indicate remarkable reductions in pollutant concentrations, with activated carbon achieving a removal efficiency of 96% for chromium, agricultural residues demonstrating a removal efficiency of 95% for dyes, and microbial biomass exhibiting an 87.5% removal efficiency for organic compounds. Furthermore, biosorption processes contribute to cost savings, regulatory compliance, water quality enhancement, resource recovery, positive public perception, and long-term sustainability, positioning them as integral components of environmentally responsible industrial practices in Panipat. This research bridges scientific inquiry with practical application, advocating for the widespread adoption of biosorption technologies to address industrial wastewater challenges, protect ecosystems, and safeguard communities in Panipat District and beyond.

Bacterial Bisorption as an Approach for the Bioremediation of Chromium Contaminated Soils: An Overview

Study’s Novelty/Excerpt This study presents comprehensive overview of the roles of various bacterial genera, including Alcaligens, Achromobacter, and Bacillus, in the biosorption of chromium from contaminated soils, highlighting specific factors influencing biosorption efficiency. It uniquely addresses the optimization of environmental conditions such as pH, temperature, and nutrient availability to enhance large-scale biosorption processes, bridging gaps noted in previous literature regarding the scalability of bacterial biosorption. Additionally, the manuscript underscores the necessity for further research in biotechnology and molecular engineering to fully harness the potential of bacterial biosorption for chromium remediation, presenting a forward-looking perspective on advancing this bioremediation strategy. Full Abstract Chromium possesses detrimental effects on the health of both plants and animals. Biosorption is a process where biological materials (bacteria, fungi, algae, or agricultural waste) are used to remove pollutants from contaminated sites. Conventional methods of remediating heavy metal-contaminated soils, such as excavation and chemical treatment, are expensive and disruptive, making them less desirable. Factors influencing bacterial biosorption efficiency are promising approaches involving bacteria to remove heavy metals such as Chromium, lead, nickel, cadmium, arsenic, etc., from contaminated soil. Some bacterial genera involved in biosorption include Alcaligens, Achromobacter, Acinetobacter, Alteromonas, Arthrobacter, Burkholderia, Bacillus, Enterobacter, Flavobacterium, and Pseudomonas. These bacteria can adsorb heavy metals such as Chromium and biotransform them into less toxic forms. Some factors influencing bacteria biosorption efficiency include pH, temperature, concentration, bacterial surface compositions, metal ion characteristics, and soil composition. Challenges associated with using bacteria for biosorption, as outlined in previous literature, include the slowness of the process and the fact that it may not be suitable for large-scale application, even though many other authors have proven its applicability on a large scale. Also, the key quality needed from the bacterial biosorbent must be tolerating the heavy metals. Another area of focus in current research is optimizing environmental conditions, such as temperature, pH, and nutrient availability, to achieve a more efficient biosorption at a larger scale. This overview highlighted the roles of bacteria in the biosorption of chromium heavy metal as a strategy for the bioremediation of Chromium contaminated soil. Conclusively, bacterial biosorption has a great potential for use in Chromium- contaminated soil remediation, and more research is needed to fully realize this potential, especially in biotechnology and molecular engineering.

Efficient adsorption of cationic and anionic dyes using hydrochar nanoparticles prepared from orange peel

Hydrochar nanoparticles biosorbent (HCNPs), derived from orange peel was prepared via an in-situ hydrothermal carbonization method. The HCNPs were tested as an effective biosorbent for removing cationic MB (methylene blue) and anionic MO (methyl orange) dyes. The prepared HCNPs was characterized using FTIR, CHN/O, SEM-EDX, UV–visible, XRD, PZC-titration, BET, and XPS. The biosorbent exhibits a good specific surface-to-volume ratio (28.23 m2/g and 0.069 cc/g, respectively) and mesopores size (2.41 nm). UV–Vis data confirm the graphitic nature of the carbon structures. XPS analysis reveals a high enrichment of multiple oxygen functionalities (including C-OH, C = O, and –COO- groups) on the surface. The optimal initial pHs are 3.0 and 5.0–8.0 for removing MO and MB, respectively. Electrostatic attraction plays a substantial role, with other hydrophobic forces in dye removal and binding. Equilibrium is attained during 60/90 min, with half-biosorption-time (tHST) for MB and MO are 4.72 and 6.71 min, respectively. The highest biosorption capacities are 203.4 mg/g for MB and 113.3 mg/g for MO, closely correlated with physiochemical characteristics. Experimental data follows Langmuir isotherm and PSO kinetic models, indicating monolayer chemisorption on a homogeneous surface. The biosorption process for both dyes is exothermic and spontaneous. HCNPs show high durability over multiple biosorption/desorption cycles using HCl and NaOH (0.1 M) for MB and MO, respectively. These findings highlight the promising potential of HCNPs as efficient biosorbents for removing both anionic and cationic dyes.

Impact of plasmolysis process on the enrichment of brewer’s spent yeast biomass with vitamin D3 by biosorption followed by spray-drying process

Vitamin D3(cholecalciferol)plays a crucial role in various physiological processes. However, vitamin D3 deficiency is a major public health problem affecting millions of people. Therefore, it is important to develop effective strategies that ensure the protection and stability of this important vitamin for food supplementation and fortification. This work aimed to impregnate intact and plasmolyzedSaccharomyces pastorianus brewer’s yeast biomass with cholecalciferol using a biosorption process followed by spray drying to characterize the obtained material in terms of morphology, average particle size, zeta potential, moisture, water activity, FT-IR, and the stability of the encapsulated vitamin during the drying and storage process. Plasmolysis proved to be an effective method for improving the biosorption efficiency, retention during spray drying, and stability of vitamin D3. In addition, this process promoted an increase in cell size, which favored the dispersion stability of the system, as evidenced by the zeta potential values. These results contribute to the understanding of a new method for delivering this vitamin that conforms to environmentally conscious practices.

Congo red removal from aqueous solution via biosorption onto Trametes trogii‐loaded poly(hydroxyethyl methacrylate) cryogel

AbstractIn this study, Trametes trogii‐loaded poly(2‐ hydroxyethyl methacrylate) cryogel (Tt‐PHEMA) was prepared and used as a biosorbent to remove Congo Red (CR), from aqueous solutions. The biomass and Tt‐PHEMA cryogel were characterized with scanning electron microscopy and Fourier Transform infrared spectroscopy. Macroporosity degree (%) and swelling ratio (%) of the Tt‐PHEMA cryogel were determined as 78.3% and 61.04%, respectively. The effect of loaded biomass amount, pH, initial CR concentration, temperature, and contact time were investigated detailedly. The maximum biosorption capacity of Tt‐PHEMA cryogel was 156.71 ± 1.22 mg g−1 at pH 6.0 at 45°C. Biosorption capacity was increased from 125.92 ± 1.524 mg g−1 to 156.71 ± 1.22 mg g−1 with increasing temperature from 25 to 45°C, demonstrating that the biosorption process was endothermic. The biosorption data were well fitted to the Freundlich isotherm and pseudo‐second‐order kinetic models. The negative Gibbs free energy change values showed favorable biosorption. The Tt‐PHEMA cryogel was easily regenerated with ethanol and used repeatedly five times without a significant change in the biosorption capacity. As a result, Trametes trogii‐loaded PHEMA cryogel has an application potential for CR removal from wastewater, taking advantage of interconnected macroporous structure cryogels.

Optimisation of Aspergilus flavus-Mediated Biosorption Process for Removal of Cr (VI) and Mn (II) Ions by Response Surface Methodology Approach

Optimisation of Aspergilus flavus-Mediated Biosorption Process for Removal of Cr (VI) and Mn (II) Ions by Response Surface Methodology Approach

Thermodynamic, kinetic, and equilibrium studies of Cu(II), Cd(II), Ni(II), and Pb(II) ion biosorption onto treated Ageratum conyzoid biomass

The issue of environmental contamination, particularly caused by the existence of heavy metal particles, is a major and widely recognized subject that receives substantial global attention. The remediation of Cu(II), Cd(II), Ni(II), and Pb(II) ionic metal particles from synthetic wastewater using chemically treated plant leaves of Ageratum conyzoides (TAC) as a biosorbent was investigated. The biosorption process was implemented utilizing a batch system, wherein several operational parameters were considered, including temperature, pH, agitation time, biosorbent dosage, and initial concentration of the metal ion. Langmuir, Freundlich, Temkin, and D-R isotherm models were used to evaluate equilibrium data. The analyzed parameter exhibits characteristics that were best fitted with the Langmuir isotherm. The observed biosorption capacities (qm) of Cu(II), Pb(II), Ni(II), and Cd(II) ions on the TAC were measured as 51.573, 30.49, 33.53, and 35.91 mg/g, respectively, at a temperature of 22 °C. The affinity sequence of these metal ions follows the order Cu(II) > Pb(II) > Ni(II) > Cd(II). The measured values for the biosorption free energy change (ΔG) of Cu(II), Pb(II), Cd(II), and Ni(II) metal ions ranged from −1.017 to −4.723, −1.368 to −3.612, −2.785 to −5.21, and −1.047 to −5.135 kJ/mol, respectively. The enthalpy (ΔH) for Cu(II), Pb(II), Cd(II), and Ni(II) were determined to be +19.33, +6.82, +14.83, and +38.07 kJ/mol, respectively. Similarly, the corresponding entropy changes (ΔS) for the same series of metal ions were recorded as +0.075, +0.064, +0.063, and +0.135 kJ/mol.K. The pseudo-second-order kinetic models yielded superior outcomes in comparison to the pseudo-first-order kinetic models. The findings of the experiment indicated that the TAC demonstrates favorable efficacy in extracting all four metal ions. Hence, the utilization of biomass derived from Ageratum conyzoides leaves has proven to be a viable and economically feasible approach for biosorption of all four metals.

An experimental study on the parthenium biosorbents for removals of chlorides and hardness from contaminated water

Among the problems most severe for the environment is the pollution of aqueous solution, specifically the creation of threats connected to hazardous heavy metals. In some rural places, it is hardness and chlorides that make groundwater or surface water dangerous in terms of the level of toxins. The requirement of hardness and chlorides is influenced because, in large quantities, when it comes to the quality of drinking water, it causes disease. Water is hazardous to the eyes because of its alkaline nature, inhalation organs, and skin problems. The more hardness and chlorides and related irritations there are, the larger the share. A naturally occurring physiochemical mechanism called biosorption enables certain biomass to passively adsorb hardness and chlorides into the biomass's cellular structure. In the lab, five distinct biosorbents were created, including parthenium, rice husk, rapeseed straw, sawdust, and egg cells, in that order. The parthenium biosorbents turned out to be the most successful biosorbents, despite the fact that each biosorbents has a different level of effectiveness in eliminating hardness and chlorides from water. By using the plant based biomass of parthenium, 65 % of chloride removal with 80 % of hardness removal was obtained. Having identified the best biosorbents, we optimized their parameters and took water samples from different sources. In chlorides removal over parthenium biosorbents, the optima dosage of biosorbents is 3.8 g, temperature is 35 °C, pH is 7, contact time is 120 min and optima agitation speed is 120 rpm. In hardness removal over parthenium biosorbents, the optima dosage of biosorbent is 5.4 g, temperature is 35 °C, pH is 6.5, contact time is 90 min and agitation speed is 150 rpm. Once the chlorides and hardness ions are removed from the water by the utilized biosorbents, the biosorption process may be homo cost effective through the regeneration and reuse of the biosorbent.

Animal waste as a valuable biosorbent in the removal of heavy metals from aquatic ecosystem-an eco-friendly approach.

Toxic pollutants in the form of heavy metals are added through various anthropogenic activities daily into the aquatic ecosystem beyond their permissible limits, and their bioaccumulation capacity makes them hazardous substances for the survival of all organisms. Thus, their removal from aquatic ecosystems is the need of the hour. Treatment of wastewater containing heavy metals through biosorption is gaining popularity and is being explored all around the world due to its various advantages over conventional methods of treatment. Utilization of animal waste as a biomaterial could be the best solution to remove it from the ecosystem. Such treatment methods are a blessing for developing and underdeveloped countries due to their low cost. This paper provides in-depth details about heavy metals, their health implications, mechanisms of toxicity, modes of transportation, and conventional treatment approaches. A comprehensive understanding of the biosorption process, encompassing its world scenario, evolution, mechanisms, factors affecting the process, and advantages, will also be covered. Finally, animal wastes and their applicability in the removal of heavy metal pollutants from wastewater shall also be thoroughly reviewed, followed by their future utility and recommendations.

Response surface methodology approach for optimization of biosorption process for removal of Hg(II) ions by immobilized Algal biomass Coelastrella sp.

Response surface methodology approach for optimization of biosorption process for removal of Hg(II) ions by immobilized Algal biomass Coelastrella sp.

The roles of Saccharomyces cerevisiae on the bioaccessibility of phenolic compounds.

Phenolic compounds are a group of non-essential dietary compounds that are widely recognized for their beneficial health effects, primarily due to their bioactive properties. These compounds which found in a variety of plant-based foods, including fruits, vegetables, and grains are known to possess antimicrobial, antioxidant, anti-inflammatory, and anti-carcinogenic properties. However, the health effects of these compounds depend on their bioaccessibility and bioavailability. In recent years, there has been growing interest in the use of probiotics for promoting human health. Saccharomyces cerevisiae is a yeast with potential probiotic properties and beneficial health effects. Biosorption of phenolic compounds on Saccharomyces cerevisiae cell walls improves their bioaccessibility. This characteristic has also allowed the use of this yeast as a biosorbent in the biosorption process due to its low cost, safety, and easy availability. S. cerevisiae enhances the bioaccessibility of phenolic compounds as a delivery system under in vitro digestion conditions. The reason for this phenomenon is the protective effects of yeast on various phenolic compounds under digestion conditions. This article shows the role of S. cerevisiae yeast on the bioaccessibility of various phenolic compounds and contributes to our understanding of the potential impact of yeasts in human health.

Chemical modification of Aspergillus flavus extracted chitosan for uranium remediation from aqueous solution

ABSTRACT Fungal chitosan derived from Aspergillus flavus AFC was employed in the synthesis of a cross-linked polystyrene biopolymer, P-AFC, which was investigated as a biosorbent material for the effective removal of uranium ions U(VI) from aqueous solutions. The characterisation of both fungal biopolymers was achieved using Brunauer-Emmett-Teller (BET) analysis, scanning electron microscopy (SEM), and Fourier-transform infrared (FTIR) spectroscopy. The efficacy of the P-AFC biosorbent in removing uranium from an aqueous solution reached equilibrium in 240 minutes at an initial uranium concentration of 50 ppm, a biosorbent amount of 0.4 g/L, and a pH of 4.0. The maximum biosorption capacity for U(VI) was determined to be 128.21 mg g−1 at room temperature, calculated using the Langmuir model. Furthermore, kinetic and thermodynamic analyses indicated that the biosorption process was characterised by chemisorption, was exothermic, and occurred spontaneously (ΔHo = –59.98 kJ mol−1 and ΔSo = –113.32 J K−1 mol−1). Recycling experiments demonstrated that the material could be reused up to five times without a noticeable decrease in removal efficiency.

Nutrient Removal from Aqueous Solutions Using Biosorbents Derived from Rice and Corn Husk Residues: A Systematic Review from the Environmental Management Perspective

This review critically analyzed the use of biosorbents derived from rice husks and corn residues for nutrient removal from aqueous solutions. Additionally, this review highlighted the use of such biosorbents in wastewater treatment. Furthermore, novel approaches for sustainable nutrient removal from aqueous solutions were identified. A comprehensive understanding of the implementation of biosorption processes using agro-industrial residues based on corn and rice crops is critical for the sustainable management of residues and water bodies in the world to protect and conserve natural resources. Specifically, the review focuses on the exploration, preparation and application of innovative biosorbents to remove various forms of nutrients such as total nitrogen, total phosphorus, nitrates, ammonium and phosphates from aqueous solution, analyzing the sustainability of treatments applied to biomass, such as thermal transformation or chemical modification to reduce environmental impacts. It was found that 95 to 99% of nitrogen and phosphorus can be removed with biosorbents made from rice husks and corn residues, analyzing approximately 50 scientific articles related to these plant materials. Research opportunities were identified, such as the recovery of removed nutrients for soil improvement, life cycle analysis to assess the concept of zero waste, among other aspects. Finally, a scheme is proposed for the selection and application of sustainable biosorbents for the removal of nutrients from aqueous solutions.

Bioremediation potential of microalgae for copper ion from wastewater and its impact on growth and biochemical contents: equilibrium isotherm studies

The use of microalgae to remediate heavy metal-contaminated wastewater has attracted more and more interest. In this investigation, the green microalgae Chloroidium ellipsoideum and Desmodesmus subspicatus were used to study copper uptake from nutrient media and its effect on algal growth and metabolism. The growth of C. ellipsoideum and D. subspicatus generally decreased with increasing copper concentrations. There was a decrease in the carbohydrate content of C. ellipsoideum, but an increase was observed in D. subspicatus by treatment with various copper concentrations. Low concentrations of copper helped to increase the protein content of C. ellipsoideum, but a decline in protein content was reported for D. subspicatus. By increasing the copper concentrations, an increase in the free amino acids and a decrease in the total lipid content of C. ellipsoideum and D. subspicatus were recorded. At 0.1 mgl–1 copper concentration, pH of 6.8, and algal dose of 1 g L−1, the maximum biosorption capacity of C. ellipsoideum was 0.398 mg g−1, corresponding to the maximum reduction of 68.66% of Cu2+, and 0.396 mg/g for D. subspicatus, corresponding to the maximum reduction of 59.52%. The Langmuir, Freundlich, Temkin and Dubinin–Radushkevich models were applied to describe the isothermal biosorption of Cu2+ ions in studied algae. The Dubinin–Radushkevich model indicated that the copper biosorption mechanism was physical in nature. Cu2+ has a greater affinity for D. subspicatus than C. ellipsoideum, suggesting that C. ellipsoideum was relatively more resistant to Cu2+ toxicity than D. subspicatus. Moreover, FT-IR analysis revealed that carboxyl, amide, amino, carbonyl, hydroxyl, methyl and alkyl groups were the key groups responsible for the biosorption process. Therefore, D. subspicatus and C. ellipsoideum are efficient biosorbents for Cu2+ and can be used as biosorbents for heavy metals removal from wastewater.

Bioremoval of lead ion from the aquatic environment using lignocellulosic (Zea mays), thermodynamics modeling, and MC simulation

Lead (Pb+2) ions considered a crucial neurotoxic heavy metal result in serious troubles in the live biological environment including poisoning, and liver and kidney shortage, in addition to anemia, hepatitis, encephalopathy, and renal syndrome. In the current study, the biomass of Zea mays (ZMS) was prepared as a biosorbent for the elimination of Pb+2 ions from the aquatic environment in batch mode relevant to contact time, pH solution, biosorbent dose, and temperature. The Zea mays biomass was characterized using an SEM microscope coupled with EDX, FTIR, XRD, and BET surface area analysis to investigate the modification of chemical structure for the biosorption system. According to the biosorption experiments, the supreme biosorbent capability of ZMS approaches 16.9 mg/g for 180 min at pH = 5.5. The evaluation of kinetics analysis reveals that the (Pb+2) biosorption by ZMS was better described with pseudo-second-order kinetics. In addition, the nonlinear regression of Freundlich, Langmuir, Temkin, and Elovich isothermal models was modeled to the equilibrium data, and it was deduced that the Langmuir isotherm provides a better fit than Langmuir based on the correlation coefficient values. The thermodynamic factors were calculated for this biosorption process in which the lead ions are sequestered by the ZMS. According to these factors, it was elucidated that the (Pb+2) ions biosorption onto the Zeamays sponge is exothermic and spontaneous. In addition, Monte Carlo (MC) simulations were conducted to screen the adsorption competence of pigments and ligands in Zea mays for Pb+2 ions adsorption. The outputs of experimental and simulation studies proved the potentiality of Zea mays sponge (ZMS) as a promising biosorbent for eliminating heavy metallic elements from aqueous media.

EVALUATION OF THE BIOSORPTION OF Mn²⁺ AND Zn²⁺ BY PASSION FRUIT PEEL: STUDY OF DOSAGE AND CONTACT TIME

Objective: The objective of this study is to investigate he effectiveness of Mn2+ and Zn2+ biosorption by passion fruit peel as a sustainable and economically viable alternative to the biosorption process. Method: The methodology adopted for this research comprises the characterization of the biomass and batch tests. Tests were carried out with different masses of biomass in standard solutions of the metals investigated. The biosorption capacity of the biomass and the removal efficiency were calculated based on the differences in concentration of the metal ions. Results and Discussion: The results obtained revealed that the biomass showed high efficiency (close to 100%) for both cations. The contact time of 30 minutes was sufficient to reach equilibrium in the biosorption capacity of the metals, indicating the speed and effectiveness of the process. Research Implications: The practical and theoretical implications of this research provide valuable information on the application of passion fruit peel as a biosorbent in the removal of potentially toxic metals from contaminated wastewater. These results may influence practices in the field of environmental remediation and environmental engineering, as well as in agro-industrial waste management. Originality/Value: This study contributes to the literature by highlighting the originality of using passion fruit peel in natura as a biosorbent, presenting an innovative and sustainable approach to the remediation of contaminated effluents. The high efficiency of ion removal with low biomass dosages and short contact times adds knowledge to the field of biosorption using agro-industrial waste.

Arthrospira platensis enriched with Cr(III), Mg(II), and Mn(II) ions improves insulin sensitivity and reduces systemic inflammation in equine metabolic affected horses.

Equine metabolic syndrome (EMS) is a critical endocrine condition in horses, characterized by hyperinsulinemia, hyperlipidemia, and insulin resistance, posing a significant threat to their health. This study investigates the efficacy of supplementing EMS-affected horses with Arthrospira platensis enriched with Cr(III), Mg(II), and Mn(II) ions using biosorption process in improving insulin sensitivity and glucose tolerance, reducing inflammation, and mitigating obesity-related fat accumulation. Our results demonstrate that Arthrospira supplementation reduces baseline insulin and glucose levels, contributing to decreased adipose tissue inflammation. Furthermore, Arthrospira supplementation results in a decrease in body weight and improvements in overall body condition scores and cresty neck scores. Additionally, administration of Arthrospira leads to reduced levels of triglycerides and aspartate aminotransferase, indicating a decrease in hepatic adiposity and inflammation. These findings suggest that Arthrospira, enriched with essential micro- and macroelements, can be an advanced feed additive to enhance insulin sensitivity, promote weight reduction, and alleviate inflammatory processes, thereby improving the overall condition of horses affected by EMS. The use of Arthrospira as a feed additive has the potential to complement conventional management strategies for EMS.