Bioresorbable Screws Research Articles

An experimental in vivo analysis of the resorption to ultrasound activated pins (Sonic weld ®) and standard biodegradable screws (ResorbX ®) in sheep

We compared the healing and reaction in the mandibles of 11 sheep of a conventional bioresorbable screw osteosynthesis with the newly developed ultrasound-activated pin osteosynthesis. The thermal stress caused by insertion of the ultrasound-aided pins leads to no cellular reaction around the pin. There is neither clinical nor histological evidence of any initial inflammation that could have been induced by the insertion. Adequate attachment of fibrous tissue to the pin head and the absence of any inflammation are important preconditions for the introduction of this new method of osteosynthesis into clinical practice. Further advantageous characteristics are easy intraoperative handling and a reduction in operating time, because cutting the thread is not required. There must be sufficient interlinkage of the polymer and the trabecular structures to ensure stability.

Fixation of the Split Calvarial Graft in Nasal Reconstruction

Reconstruction of nasal contour where skeletal support is deficient or absent has usually been achieved using autogenous bone. Membranous bone taken from the cranium is clearly superior to rib or iliac crest when used as autografting material to the craniofacial skeleton. Conventionally, the bone graft is rigidly fixated to the recipient nasal bone with either metal plate-screw systems or Kirschner wires. Reported here are the results of a single biodegradable screw fixation of the split calvarial graft that is used for nasal reconstruction. Ten patients with moderate to severe saddle nose deformity underwent reconstruction using the open rhinoplasty approach. The graft was harvested from the outer cortex of the parietal bone, shaped, and secured in place with a single bioresorbable screw. No significant resorption has been observed in the grafts and a favorable aesthetic result was achieved in all of the cases. Described modification in fixation of the bone graft in nasal reconstruction avoids some of the disadvantages of permanent materials while preserving the advantages of rigid fixation.

Using resorbable screws for fixation of cortical onlay bone grafts: An in vivo study in rabbits

The purpose of this study is to test bioresorbable screws as an alternative to titanium screw graft fixation. When cortical onlay grafts are used, it is necessary to rigidly immobilize them with titanium screws into the recipient site. The screws must be removed before placing implants into this site. Bioresorbable screws may be an alternative to titanium fixation, eliminating the additional morbidity associated with this. Fifteen New Zealand White rabbits were divided into 3 groups. Bilateral tibial onlay bone grafts were placed in the mandible and secured using titanium fixation, bioresorbable fixation, or no fixation. After 6 weeks, all grafted sites were harvested. Hematoxylin-eosin and Giemsa staining were performed to evaluate inflammation, graft integration, and thickness. The treatment groups showed evidence of consolidation under light microscopy. Smooth integration of the graft borders with the recipient bone was identified. No integration was seen in the control group. The average thickness of the grafted sites was: 1) bioresorbable, 2.28 mm; 2) titanium, 1.87 mm; and 3) control, 1.06 mm. The differences were statistically significant (P = .0004) between the titanium group and the control group, as well as between the bioresorbable and the control group (P = .01). There was no statistically significant difference between the 2 treatment groups (P = .19). The overall thickness of the treatment specimens was greater than that of the control group. The bioresorbable group showed graft integration equal to that of the titanium group, making it an adequate alternative for graft fixation.

Biceps tenodesis: a biomechanical study of fixation methods

Rupture of the biceps tendon occurs predominantly in the middle-aged and elderly, being predisposed through bicipital tendinitis and rotator cuff lesions. Surgical repair may be an option for those requiring strength in supination. This study compared the initial fixation strength of keyhole tenodesis (n = 7) and interference screw fixation by use of cadaveric specimens. Two interference screws were evaluated (n = 7 × 2): the round-headed cannulated interference screw (RCI) and a bioresorbable screw (Sysorb). All specimens failed at the fixation site but one. This study found that overall there was a significant effect as a result of study group (keyhole vs Sysorb vs RCI, P = .034). The post hoc comparisons revealed that the keyhole was significantly stronger than the RCI screw ( P = .033) but not significantly different compared with the Sysorb screw ( P = .129). No significant difference was observed between the Sysorb and RCI screws ( P = .762). Interference screw fixation failed by tendon slippage at the screw-tendon-bone interface; keyhole fixation failed by tendon splitting and slippage out of the restraining keyhole. Keyhole tenodesis may permit earlier postoperative mobilization when compared with tenodesis by use of interference screw fixation.

Use of Bio-Resorbable Plates and Screws in Pediatric Neurological and Craniofacial Surgery: A Review of 51 Cases

Use of Bio-Resorbable Plates and Screws in Pediatric Neurological and Craniofacial Surgery: A Review of 51 Cases

Bioresorbable versus titanium screws for osteosynthesis. Results of a prospective randomized controlled clinical study on sagittal split osteotomy of the mandible

Bioresorbable versus titanium screws for osteosynthesis. Results of a prospective randomized controlled clinical study on sagittal split osteotomy of the mandible