Biorelevant Conditions Research Articles

Nonenzymatic Stereoselective S-Glycosylation of Polypeptides and Proteins.

Here we report a nonenzymatic glycosylation reaction that builds axial S-glycosidic bonds under biorelevant conditions. This strategy is enabled by the design and use of allyl glycosyl sulfones as precursors to glycosyl radicals and exploits the exceptional functional group tolerance of radical processes. Our method introduces a variety of unprotected glycosyl units to the cysteine residues of peptides in a highly selective fashion. Through developing the second-generation protocol, we applied our method in the direct glycosylation of complex polypeptides and proteins. Computational studies were performed to elucidate the reaction mechanism.

Modelling and Simulation of the Drug Release from a Solid Dosage Form in the Human Ascending Colon: The Influence of Different Motility Patterns and Fluid Viscosities.

For colonic drug delivery, the ascending part of the colon is the most favourable site as it offers the most suitable environmental conditions for drug dissolution. Commonly, the performance of a drug formulation is assessed using standardised dissolution apparatus, which does not replicate the hydrodynamics and shear stress evoked by wall motion in the colon. In this work, computer simulations are used to analyse and understand the influence of different biorelevant motility patterns on the disintegration/drug release of a solid dosage form (tablet) under different fluid conditions (viscosities) to mimic the ascending colonic environment. Furthermore, the ability of the motility pattern to distribute the drug in the ascending colon luminal environment is analysed to provide data for a spatiotemporal concentration profile. The motility patterns used are derived from in vivo data representing different motility patterns in the human ascending colon. The applied motility patterns show considerable differences in the drug release rate from the tablet, as well as in the ability to distribute the drug along the colon. The drug dissolution/disintegration process from a solid dosage form is primarily influenced by the hydrodynamic and shear stress it experiences, i.e., a combination of motility pattern and fluid viscosity. Reduced fluid motion leads to a more pronounced influence of diffusion in the tablet dissolution process. The motility pattern that provoked frequent single shear stress peaks seemed to be more effective in achieving a higher drug release rate. The ability to simulate drug release profiles under biorelevant colonic environmental conditions provides valuable feedback to better understand the drug formulation and how this can be optimised to ensure that the drug is present in the desired concentration within the ascending colon.

Evaluation of Biodegradable PVA-Based 3D Printed Carriers during Dissolution.

The presence of additive manufacturing, especially 3D printing, has the potential to revolutionize pharmaceutical manufacturing owing to the distinctive capabilities of personalized pharmaceutical manufacturing. This study’s aim was to examine the behavior of commonly used polyvinyl alcohol (PVA) under in vitro dissolution conditions. Polylactic acid (PLA) was also used as a comparator. The carriers were designed and fabricated using computer-aided design (CAD). After printing the containers, the behavior of PVA under in vitro simulated biorelevant conditions was monitored by gravimetry and dynamic light scattering (DLS) methods. The results show that in all the dissolution media PVA carriers were dissolved; the particle size was under 300 nm. However, the dissolution rate was different in various dissolution media. In addition to studying the PVA, as drug delivery carriers, the kinetics of drug release were investigated. These dissolution test results accompanied with UV spectrophotometry tracking indirectly determine the possibilities for modifying the output of quality by computer design.

Size-based characterization of adalimumab and TNF-\u03b1 interactions using flow induced dispersion analysis: assessment of avidity-stabilized multiple bound species

The understanding and characterization of protein interactions is crucial for elucidation of complicated biomolecular processes as well as for the development of new biopharmaceutical therapies. Often, protein interactions involve multiple binding, avidity, oligomerization, and are dependent on the local environment. Current analytical methodologies are unable to provide a detailed mechanistic characterization considering all these parameters, since they often rely on surface immobilization, cannot measure under biorelevant conditions, or do not feature a structurally-related readout for indicating formation of multiple bound species. In this work, we report the use of flow induced dispersion analysis (FIDA) for in-solution characterization of complex protein interactions under in vivo like conditions. FIDA is an immobilization-free ligand binding methodology employing Taylor dispersion analysis for measuring the hydrodynamic radius (size) of biomolecular complexes. Here, the FIDA technology is utilized for a size-based characterization of the interaction between TNF-α and adalimumab. We report concentration-dependent complex sizes, binding affinities (Kd), kinetics, and higher order stoichiometries, thus providing essential information on the TNF-α–adalimumab binding mechanism. Furthermore, it is shown that the avidity stabilized complexes involving formation of multiple non-covalent bonds are formed on a longer timescale than the primary complexes formed in a simple 1 to 1 binding event.

Evaluation of Bio-Mechanistic Behavior of Liquid Self-Microemulsifying Drug Delivery System in Biorelevant Media

The aim of the study is to mechanistically investigate the drug loci, structural integrity, chemical interactions, and absorption behavior of the liquid self-microemulsifying drug delivery system (SMEDDS). The loci of drug molecules in self-forming microemulsions in biorelevant media (fasted state simulated gastric fluid and fed state simulated intestinal fluid) were investigated by 1H and 13C nuclear magnetic resonance (NMR) spectroscopy. Chemical interactions were observed through attenuated total reflectance spectroscopy (ATR). The structural integrity of self-forming microemulsions in biorelevant media was determined by small angle X-ray scattering (SAXS) and fluorescence resonance energy transfer (FRET). Morphological features of self-forming microemulsion were determined by confocal laser scanning microscopy. In vitro, lipid digestion behavior was evaluated for particle size, zeta potential, free fatty acids (FFA), and drug released through standard protocols. In-house characterizations were determined through standard methodologies. 1H and 13C NMR revealed that drug loci were found in a majority in the oily core region in the self-forming microemulsion. The ATR signifies that no inherent chemical was observed in the liquid SMEDDS and drug-loaded self-microemulsions in the biorelevant media. Structural integrity was well maintained during the dispersive and digestive phases in the gastrointestinal lumen during lipolysis in biorelevant conditions, as revealed by SAXS and FRET. An in vitro digestion study in biorelevant conditions depicts no fluctuations in size and zeta potential with a predominant release of FFA and drug, and was to be revealed physiologically acceptable for clinical applications.

The peculiar dissolution behaviour of Piretanide hosted in layered double hydroxides

Layered double hydroxides (LDHs) are widely used as inorganic hosts for different applications, in particular for drug delivery. Piretanide, a poorly soluble diuretic drug, could benefit of the association with LDH for improving the dissolution rate and also for limiting the gastric irritation after its repeated administration thanks to natural antacid properties of LDH. In this paper, the hybrids compounds Piretanide-Mg3Al-LDH and Zn3Al-LDH were synthesized by co-precipitation method. The first proofs to demonstrate the successful intercalation came from X-ray powder diffraction (from hydroxide layers expansion with respect to LDH-carbonate), thermal analysis (from the absence of drug melting point in the hybrid compound) and infrared spectroscopy (from the absence of the carboxylic acid vibration in the hybrid). In addition, SEM microscopy/EDS microanalysis supported the formation of new entities. Both compounds showed a significant improvement of the drug dissolution rate, compared to the active alone, in biorelevant conditions simulating the oral administration.

Dissolution testing of modified release products with biorelevant media: An OrBiTo ring study using the USP apparatus III and IV

During the OrBiTo project, our knowledge on the gastrointestinal environment has improved substantially and biorelevant media composition have been refined. The aim of this study was to propose optimized biorelevant testing conditions for modified release products, to evaluate the reproducibility of the optimized compendial apparatus III (USP apparatus III) and compendial apparatus IV (USP apparatus IV, open-loop mode) dissolution methods and to evaluate the usefulness of these methods to forecast the direction of food effects, if any, based on the results of two «ring» studies and by using two model modified release (MR) products, Ciproxin / Cipro XR and COREG CR. Six OrBiTo partners participated in each of the ring studies. All laboratories were provided with standard protocols, pure drug substance, and dose units.For the USP apparatus III, the dissolution methods applied to Ciproxin / Cipro XR, a monolithic MR product of an active pharmaceutical ingredient (API) with moderate aqueous solubility, were robust with low intra- and inter-laboratory data variability. Data from all partners were in line on a qualitative basis with food effect data in humans. For the USP apparatus IV, the dissolution methods applied to COREG CR, a multiparticulate, pH dependent, MR product of an API with low and pH dependent solubility led to high intra- and inter- laboratory data variability. Data from all partners were in line, on a qualitative basis, with the previously observed food effects in humans.

Peptide Side-COOH Groups Have Two Distinct Conformations under Biorelevant Conditions.

The carboxyl (COOH) side chain groups of amino acids, such as aspartic acid, play an important role in biochemical processes, including enzymatic proton transport. In many theoretical studies, it was found that the (bio)chemical reactivity of the carboxyl group strongly depends on the conformation of this group. Interestingly, up to now there has been no experimental investigation of the geometry and the stability of different COOH conformers under biorelevant conditions. Here, we investigate the conformational isomerism of the side chain COOH group of N-acetyl aspartic acid amide using polarization-resolved two-dimensional infrared spectroscopy. We find that the carboxyl group shows two distinct near-planar conformers (syn and anti) when dissolved in water at room temperature. Both conformers are significantly populated in aqueous solution (75 ± 10% and 25 ± 10% for syn and anti, respectively). Molecular dynamics simulations show that the anti conformer interacts more strongly with water molecules than the syn conformer, explaining why this conformer is significantly present in aqueous solution.

Following in Situ the Degradation of Mesoporous Silica in Biorelevant Conditions: At Last, a Good Comprehension of the Structure Influence.

Mesoporous silica nanoparticles (MSNs) have seen a fast development as drug delivery carriers thanks to their tunable porosity and high loading capacity. The employ of MSNs in biomedical applications requires a good understanding of their degradation behavior both to control drug release and to assess possible toxicity issues on human health. In this work, we study mesoporous silica degradation in biologically relevant conditions through in situ ellipsometry on model mesoporous nanoparticle or continuous thin films, in buffer solution and in media containing proteins. In order to shed light on the structure/dissolution relationship, we performed dissolution experiments far from soluble silicate species saturation. Via a complete decorrelation of dissolution and diffusion contributions, we proved unambiguously that surface area of silica vectors is the main parameter influencing dissolution kinetics, while thermal treatment and open mesoporous network architecture have a minor impact. As a logical consequence of our dissolution model, we proved that the dissolution lag-time can be promoted by selective blocking of the mesopores that limits the access to the mesoporous internal surface. This study was broadened by studying the impact of the organosilanes in the silica structure, of the presence of residual structuring agents, and of the chemical composition of the dissolution medium. The presence of albumin at blood concentration was found affecting drastically the dissolution kinetics of the mesoporous structure, acting as a diffusion barrier. Globally, we could identify the main factors affecting mesoporous silica materials degradation and proved that we can tune their structure and composition for adjusting dissolution kinetics in order to achieve efficient drug delivery.

Measuring pH and Buffer Capacity in Fluids Aspirated from the Fasted Upper Gastrointestinal Tract of Healthy Adults.

The design of biorelevant conditions for in vitro evaluation of orally administered drug products is contingent on obtaining accurate values for physiologically relevant parameters such as pH, buffer capacity and bile salt concentrations in upper gastrointestinal fluids. The impact of sample handling on the measurement of pH and buffer capacity of aspirates from the upper gastrointestinal tract was evaluated, with a focus on centrifugation and freeze-thaw cycling as factors that can influence results. Since bicarbonate is a key buffer system in the fasted state and is used to represent conditions in the upper intestine in vitro, variations on sample handling were also investigated for bicarbonate-based buffers prepared in the laboratory. Centrifugation and freezing significantly increase pH and decrease buffer capacity in samples obtained by aspiration from the upper gastrointestinal tract in the fasted state and in bicarbonate buffers prepared in vitro. Comparison of data suggested that the buffer system in the small intestine does not derive exclusively from bicarbonates. Measurement of both pH and buffer capacity immediately after aspiration are strongly recommended as "best practice" and should be adopted as the standard procedure for measuring pH and buffer capacity in aspirates from the gastrointestinal tract. Only data obtained in this way provide a valid basis for setting the physiological parameters in physiologically based pharmacokinetic models.

Modeling Recrystallization Kinetics Following the Dissolution of Amorphous Drugs.

Amorphous phases are frequently employed to overcome the solubility limitation that is nowadays commonplace in developmental small-molecule drugs intended for oral administration. However, since the solubility enhancement has finite longevity (it is a "kinetic solubility" effect), characterizing its duration (i.e., the so-called "parachute" effect) can be important for optimizing a formulation with regard to its in vivo exposure. Two semiempirical models, based on dispersive kinetics theory, are evaluated for their ability to precisely describe experimental transients depicting a loss in supersaturation (initially generated by the dissolution of the amorphous phase) over time, as the solubilized drug recrystallizes. It is found that in cases where the drug solubility significantly exceeds that of the crystal at longer times, the mechanism has substantial "denucleation" (dissolution) character. On the other hand, "nucleation and growth" (recrystallization) kinetics best describe systems in which the recrystallization goes to completion within the experimental time frame. Kinetic solubility profiles taken from the recent literature are modeled for the following drugs: glibenclamide, indomethacin, loratadine, and terfenadine. In the last case, a combination of three different kinetic models, two classical ones plus the dispersive model, are used together in describing the entire dissolution-recrystallization transient of the drug, obtaining a fit of R2 = 0.993. By precisely characterizing the duration of the "parachute" in vitro (e.g., under biorelevant conditions), the proposed models can be useful in predicting trends and thereby guiding formulation development and optimization.

Absorptive Dissolution Testing: An Improved Approach to Study the Impact of Residual Crystallinity on the Performance of Amorphous Formulations

Amorphous solid dispersions typically improve the oral bioavailability of poorly soluble drugs. However, residual crystallinity is always a concern, in terms of potential impact on the product stability and performance. Consequently, in vitro tools that allow biorelevant assessment of residual crystallinity are of interest. The goal of the present study was to use absorptive dissolution testing to evaluate the impact of different levels of crystallinity in an amorphous formulation on membrane mass transport kinetics and supersaturation-time profiles. Partial crystallinity was induced in commercially available tacrolimus formulations by exposure to moderate temperature and high relative humidity. A hollow fiber membrane was coupled to a dissolution vessel to create an absorptive dissolution testing apparatus, and concentration-time profiles were simultaneously monitored during dissolution (donor compartment) and after absorption across the membrane (receiver compartment). The coupled dissolution-absorption measurements indicated that residual crystallinity impacted the absorption profiles in a manner that depended on the volume of fluid used for the dissolution measurement. A high percentage of residual crystallinity hampered the drug release from the formulation. Higher supersaturation in nonsink dissolution conditions improved mass transfer rates; however, the presence of seed crystals led to rapid desupersaturation. Further systematic studies to delineate the interplay between the rate of absorption and desupersaturation revealed that for a given dissolution rate, the crystallization rate would supersede the absorption rate only at high supersaturations. Thus, seeds have a lower impact on absorption when the overall supersaturation generated is lower. This study underscores the importance of considering competing physical processes when evaluating amorphous formulations. A further consideration highlighted is that different fluid volumes may impact the absorption profile for supersaturating dosage forms. Absorptive dissolution testing appears to be a potentially valuable tool to mechanistically investigate amorphous solid dispersion formulation release and phase behavior under more biorelevant conditions.

Unique Aggregation of Sterigmatocystin in Water Yields Strong and Specific Circular Dichroism Response Allowing Highly Sensitive and Selective Monitoring of Bio-Relevant Interactions.

We demonstrated the hitherto unknown property of the mycotoxin sterigmatocystin (STC) to provide homogeneous solutions in aqueous medium by forming a unique aggregate type (not formed by analogous aflatoxins), characterized by exceptionally strong circular dichroism (CD) bands in the 300–400 nm range. Results showed that these CD bands do not originate from intrinsic STC chirality but are a specific property of a peculiar aggregation process similar to psi-DNA CD response. Transmission electron microscopy (TEM) experiments revealed a fine fiber network resembling a supramolecular gel structure with helical fibers. Thermodynamic studies of aggregates by differential scanning calorimetry (DSC) revealed high reversibility of the dominant aggregation process. We demonstrated that the novel STC psi-CD band at 345 nm could be applied at biorelevant conditions (100 nanomolar concentration) and even in marine-salt content conditions for specific and quantitative monitoring of STC. Also, we showed that STC strongly non-covalently interacts with ds-DNA with likely toxic effects, thus contrary to the previous belief requiring prior enzyme epoxidation.

Optically Robust and Biocompatible Mechanosensitive Upconverting Nanoparticles.

Upconverting nanoparticles (UCNPs) are promising tools for background-free imaging and sensing. However, their usefulness for in vivo applications depends on their biocompatibility, which we define by their optical performance in biological environments and their toxicity in living organisms. For UCNPs with a ratiometric color response to mechanical stress, consistent emission intensity and color are desired for the particles under nonmechanical stimuli. Here, we test the biocompatibility and mechanosensitivity of α-NaYF4:Yb,Er@NaLuF4 nanoparticles. First, we ligand-strip these particles to render them dispersible in aqueous media. Then, we characterize their mechanosensitivity (∼30% in the red-to-green spectral ratio per GPa), which is nearly 3-fold greater than those coated in oleic acid. We next design a suite of ex vivo and in vivo tests to investigate their structural and optical properties under several biorelevant conditions: over time in various buffers types, as a function of pH, and in vivo along the digestive tract of Caenorhabditis elegans worms. Finally, to ensure that the particles do not perturb biological function in C. elegans, we assess the chronic toxicity of nanoparticle ingestion using a reproductive brood assay. In these ways, we determine that mechanosensitive UCNPs are biocompatible, i.e., optically robust and nontoxic, for use as in vivo sensors to study animal digestion.

Cyclodextrin-functionalized cellulose filter paper for selective capture of diclofenac

An environmentally friendly and low-cost material based on cellulose filter paper modified with β-cyclodextrin (β-CD) was designed to uptake and elute drugs for water purification. To carry out the work, a β-CD derivative was first obtained through reaction of β-CD with N-(hydroxymethyl) acrylamide (NMA), and then β-CD-NMA was grafted on cellulose by means of the Fenton’s reaction. The CD-grafted cellulose paper was characterized by ATR-FTIR analysis, SEM images, and mechanical properties. CD-functionalized (F1) and non-functionalized (NF) papers were tested in aqueous media containing an antibiotic (ciprofloxacin) or a non-steroidal anti-inflammatory drug (diclofenac) covering a wide range of salinity levels. Ciprofloxacin was similarly adsorbed by both papers through ionic interactions, while diclofenac was selectively and remarkably captured by the CD-functionalized filter (up to 25 mg g−1 from saline medium under biorelevant conditions; ca. 60 mg g−1 Langmuir isotherm model). Effects of diclofenac concentration, volume of medium, and incubation time on the amount adsorbed were investigated in detail. Elution tests involved the combination of several organic solvents and alkaline solutions and revealed that acetonitrile:NaOH 10 mM aq. solution (50:50, v/v) allows for an effective recovery of the previously trapped diclofenac. Application of ultrasounds shortened the process to 10 min. Reusability of F1 papers was also evaluated. Overall, the CD-grafted cellulose paper appears as a suitable material for bioremediation and analytical purposes.

<p>Silver nanoparticles: aggregation behavior in biorelevant conditions and its impact on biological activity</p>

PurposeThe biomedical applications of silver nanoparticles (AgNPs) are heavily investigated due to their cytotoxic and antimicrobial properties. However, the scientific literature is lacking in data on the aggregation behavior of nanoparticles, especially regarding its impact on biological activity. Therefore, to assess the potential of AgNPs in therapeutic applications, two different AgNP samples were compared under biorelevant conditions.MethodsCitrate-capped nanosilver was produced by classical chemical reduction and stabilization with sodium citrate (AgNP@C), while green tea extract was used to produce silver nanoparticles in a green synthesis approach (AgNP@GTs). Particle size, morphology, and crystallinity were characterized using transmission electron microscopy. To observe the effects of the most important biorelevant conditions on AgNP colloidal stability, aggregation grade measurements were carried out using UV-Vis spectroscopy and dynamic light scatterig, while MTT assay and a microdilution method were performed to evaluate the effects of aggregation on cytotoxicity and antimicrobial activity in a time-dependent manner.ResultsThe aggregation behavior of AgNPs is mostly affected by pH and electrolyte concentration, while the presence of biomolecules can improve particle stability due to the biomolecular corona effect. We demonstrated that high aggregation grade in both AgNP samples attenuated their toxic effect toward living cells. However, AgNP@GT proved less prone to aggregation thus retained a degree of its toxicity.ConclusionTo our knowledge, this is the first systematic examination regarding AgNP aggregation behavior with simultaneous measurements of its effect on biological activity. We showed that nanoparticle behavior in complex systems can be estimated by simple compounds like sodium chloride and glutamine. Electrostatic stabilization might not be suitable for biomedical AgNP applications, while green synthesis approaches could offer new frontiers to preserve nanoparticle toxicity by enhancing colloidal stability. The importance of properly selected synthesis methods must be emphasized as they profoundly influence colloidal stability, and therefore biological activity.

Geometrical and Structural Dynamics of Imatinib within Biorelevant Colloids.

Solubilization of lipophilic drugs is essential for efficient uptake. We detail the solubilization of imatinib in simulated gastrointestinal fluids containing taurocholate (TC) and lecithin (L) and reflecting fasted versus fed states using NMR spectroscopy, X-ray diffractometry, transmission electron microscopy, and dynamic light scattering analysis. Imatinib concentration impacted colloidal geometries and molecular dynamics in a fasted state. At drug substance concentrations up to 250 μM, imatinib was mainly engulfed within the core of >110 nm in diameter vesicles. At higher drug concentrations, the colloids collapsed to <40 nm, and imatinib migrated into the shell of the micelles, mainly being associated with the lipophilic face of TC but not with L. Simulating the fed state resulted in the formation of small micelles independent of the drug concentration. Furthermore, a hydrogel was formed, effectively keeping the drug substance in an amorphous state even when stressed by drying. In conclusion, this study detailed the fascinating dynamics of colloidal structures and molecular assembly as a function of imatinib concentration in biorelevant conditions. This approach may provide a blueprint for the rational development of future pharmaceutical formulations, taking the molecular interactions with bile salts/phospholipids into account.

Dual Drug Delivery of Sorafenib and Doxorubicin from PLGA and PEG-PLGA Polymeric Nanoparticles.

Combinatorial drug delivery is a way of advanced cancer treatment that at present represents a challenge for researchers. Here, we report the efficient entrapment of two clinically used single-agent drugs, doxorubicin and sorafenib, against hepatocellular carcinoma. Biocompatible and biodegradable polymeric nanoparticles provide a promising approach for controlled drug release. In this study, doxorubicin and sorafenib with completely different chemical characteristics were simultaneously entrapped by the same polymeric carrier, namely poly(d,l-lactide-co-glycolide) (PLGA) and polyethylene glycol-poly(d,l-lactide-co-glycolide) (PEG-PLGA), respectively, using the double emulsion solvent evaporation method. The typical mean diameters of the nanopharmaceuticals were 142 and 177 nm, respectively. The PLGA and PEG-PLGA polymers encapsulated doxorubicin with efficiencies of 52% and 69%, respectively, while these values for sorafenib were 55% and 88%, respectively. Sustained drug delivery under biorelevant conditions was found for doxorubicin, while sorafenib was released quickly from the PLGA-doxorubicin-sorafenib and PEG-PLGA-doxorubicin-sorafenib nanotherapeutics.

Preparation of well-defined brush-like block copolymers for gene delivery applications under biorelevant reaction conditions.

Well-defined oligo(ethylene glycol) methyl ether methacrylate (OEOMA) based block copolymers with cationic segments composed by N,N-(dimethylamino) ethyl methacrylate (DMAEMA) and/or 2-(diisopropylamino) ethyl methacrylate (DPA) were developed under biorelevant reaction conditions. These brush-type copolymers were synthesized through supplemental activator and reducing agent (SARA) atom transfer radical polymerization (ATRP) using sodium dithionite as SARA agent. The synthesis was carried out using an eco-friendly solvent mixture, very low copper catalyst concentration, and mild reaction conditions. The structure of the block copolymers was characterized by size exclusion chromatography (SEC) analysis and 1H nuclear magnetic resonance (NMR) spectroscopy. The pH-dependent protonation of these copolymers enables the efficient complexation with plasmid DNA (pDNA), yielding polyplexes with sizes ranging from 200 up to 700 nm, depending on the molecular weight of the copolymers, composition and concentration used. Agarose gel electrophoresis confirmed the successful pDNA encapsulation. No cytotoxicity effect was observed, even for N/P ratios higher than 50, for human fibroblasts and cervical cancer cell lines cells. The in vitro cellular uptake experiments demonstrated that the pDNA-loaded block copolymers were efficiently delivered into nucleus of cervical cancer cells. The polymerization approach, the unique structure of the block copolymers and the efficient DNA encapsulation presented can open new avenues for development of efficient tailor made gene delivery systems under biorelevant conditions.

An in vitro - in silico approach for the formulation and characterization of ranitidine gastroretentive delivery systems

Contemporary trends in the pharmaceutical development emphasize the utility of advanced computer tools to facilitate formulation of new medicines. A special attention has been given to the formulation and characterization of dosage forms for targeted drug delivery that can improve therapeutic outcome. The objective of this study was to apply the combined in vitro-in silico approach to optimize the design of gastroretentive floating system for sustained release of ranitidine hydrochloride. Formulation of the floating systems was based on the effervescent effect of sodium-bicarbonate, whereas prolonged release of ranitidine hydrochloride was provided by the hydrophilic polyethylene oxide polymers which swell and form a gel layer on the surface of the floating tablets. Dosage form floating characteristics and drug dissolution were investigated under biorelevant conditions simulating stomach environment. The obtained dissolution data were used as inputs in ranitidine-specific physiologically-based pharmacokinetic model within GastroPlus™ software to predict the expected pharmacokinetic profiles following oral administration of the designed formulations. The predictive power of the designed model was tested by comparing the simulation outcomes with literature values on drug plasma concentration-time profiles following intravenous and oral administration of different ranitidine doses. In addition, simulation results demonstrated increased extent of drug absorption with prolonged gastric residence times.