Biorelevant Conditions Research Articles

Pharmaceutical availability testing − can a drug-specific test be relevant for assessing the quality of dietary supplements?

Our current novel analytical approach focuses on testing the quality of dietary supplements. Specifically, we examine the release of substances such as proline, tryptophan, tyrosine, carnitine, and vitamin C sourced from the EU, Switzerland, and the USA.In tablet-form supplements, release levels were low in both pharmacopoeial dissolution tests (Trp5 – 23%; Trp6 – 12%; VitC4 – 23%) and those simulating biorelevant conditions (Trp5 – 53%; Trp6 – 24%; VitC4 – 68%). The implementation of biorelevant conditions PhysioCell for capsule-form supplements led to an enhanced release of substances (from 11 to 106 percentage points) compared to pharmacopoeial dissolution tests. This indicates that the release of their active substance is strongly influenced by gastrointestinal motility, which, due to its high intra- and inter-individual variability, will result in inconsistent and unpredictable release and biological response.Thus, pharmacopeial methods serves as a reliable screening approach for the quality of dietary supplements.

Exploring biorelevant conditions and release profiles of ritonavir from HPMCAS-based amorphous solid dispersions

Development of a release test for amorphous solid dispersions (ASDs) that is in vivo predictive is essential to identify optimally performing formulations early in development. For ASDs containing an enteric polymer, consideration of buffer properties is essential. Herein, release rates of hydroxypropyl methyl cellulose acetate succinate (HPMCAS) and ritonavir from ASDs with a 20% drug loading were compared in phosphate and bicarbonate buffers with different molarities, at pH 6.5. The bioaccessibility of ritonavir from the ASD in the tiny-TIM apparatus was also evaluated and compared to that of the crystalline drug. The surface pH at the dissolving solid: solution interface was evaluated using a pH-sensitive fluorescence probe for HPMCAS and ASD compacts in phosphate and bicarbonate buffers. Drug and polymer were found to release congruently in all buffer systems, indicating that the polymer controlled the drug release. Release was slowest in 10 mM bicarbonate buffer, and much faster in phosphate buffers with molarities typically used in release testing (20-50 mM). Release from the 10 mM bicarbonate buffer was matched in a 5 mM phosphate buffer. The surface pH of HPMCAS and HPMCAS:ritonavir ASDs was found to be lower than the bulk solution pH, where surface pH differences largely explained release rate differences seen in the different buffer systems. Ritonavir was highly bioaccessible from the ASD, as assessed by the tiny-TIM system, and much less bioaccessible when crystalline drug was used. The observations highlight the need for continued development of biorelevant assays tailored for ASD formulation assessment.

Elemental composition of household dusts extracted in simulated body fluids and their impact on culturable pathogenic bacteria responses

In the last decade, a great deal of research has focused on the determination of potential toxic elements by total concentration and identification the microorganisms in dust. However, determining bio-relevant (e.g., inhalable) forms of elements instead of total contents in acids is necessary for human health. Moreover, examination of the behavior of microorganism under these bio-relevant conditions and revealing the interaction between elements and pathogens is vital and necessary for deeper understanding. However, previous studies have ignored these topics. Therefore, the present study aimed to (i) investigate elements in household dusts extracted in simulated lung fluids, (ii) examine the total concentration of culturable bacteria and their biochemical responses with exposure to bio-fractions of household dusts, and (iii) assess their relations and risks using the model approaches by inhalation. Here, settled dusts were collected in 25 houses, and extracted in four simulated body fluids to determine bio-fractions of elements. Moreover, total count of potentially pathogenic and heterotrophic bacteria, and four clinically important culturable pathogens were incubated in the presence of household-dusts extracted in simulated body fluids. The activity, biofilm, biochemical and oxidative responses of pathogens were measured following household-dust exposures. Afterward, the relationship between elements and pathogen responses were evaluated, and model and derived approaches were used for risk assessments of elements and pathogens. The higher daily intake of elements obtained in artificial lysosomal fluid fraction of household dust mimicking the inflammatory condition compared to other body fluids. Moreover, bacterial responses were mainly influenced from bio-fractions of household dusts and their elemental contents.

Characterization of biosurfactants' micelles formation using fluorescence measurements: sodium taurocholate as case of study.

The evaluation of micellization parameters of surfactants that aggregate gradually, such as bile salts, is not trivial. In this work, different probes and data treatment models are tested to set up an analytical method based on fluorescence measurements to determine the critical micelle concentration (CMC) and micellization range ((C) of biosurfactants. Sodium taurocholate (NaTc) is used as example. The fluorescence intensity of five fluorophores has been monitored upon the addition of a concentrated NaTc solution in two different media: water and a biorelevant buffer (maleic buffer pH 6.5, I = 120 mM). Four different data treatment methods have been tested. The micellization process can be evaluated satisfactorily using fluorescent probes such as propranolol and tetracaine, and also monitoring directly the intrinsic fluorescence of NaTc. However, the results obtained with nonpolar probes (pyrene and naphthalene) are more complex to evaluate due to the presence of confluent processes. Although the four models tested for the data treatment are commonly used for this purpose, Carpena's method is the most appropriate as it provides the most accurate CMC and ΔC values. The micellization process is faster in a biorelevant buffer than in water. The study of the micellization of bile salts is not an evident process. After the selection of adequate probes and data treatment methods, the CMC values for NaTC in water and maleic buffer reveal that the biorelevant conditions favour micellization, which in turn may allow faster solubilization of ingested compounds.

Catalysis driven by an amyloid–substrate complex

Amine modification through nucleophilic attack of the amine functionality is a very common chemical transformation. Under biorelevant conditions using acidic-to-neutral pH buffer, however, the nucleophilic reaction of alkyl amines (pKa ≈ 10) is not facile due to the generation of ammonium ions lacking nucleophilicity. Here, we disclose a unique molecular transformation system, catalysis driven by amyloid-substrate complex (CASL), that promotes amine modifications in acidic buffer. Ammonium ions attached to molecules with amyloid-binding capability were activated through deprotonation due to the close proximity to the amyloid catalyst formed by Ac-Asn-Phe-Gly-Ala-Ile-Leu-NH2 (NL6), derived from islet amyloid polypeptide (IAPP). Under the CASL conditions, alkyl amines underwent various modifications, i.e., acylation, arylation, cyclization, and alkylation, in acidic buffer. Crystallographic analysis and chemical modification studies of the amyloid catalysts suggested that the carbonyl oxygen of the Phe-Gly amide bond of NL6 plays a key role in activating the substrate amine by forming a hydrogen bond. Using CASL, selective conversion of substrates possessing equivalently reactive amine functionalities was achieved in catalytic reactions using amyloids. CASL provides a unique method for applying nucleophilic conversion reactions of amines in diverse fields of chemistry and biology.

Synthesis and crystallization of a carboxylate functionalized N-heterocyclic carbene-based Au13 cluster with strong photo-luminescence.

Here we report the synthesis and crystallization of a -COOH-capped N-heterocyclic carbene (NHC)-protected Au13 cluster. The single-crystal structure of the -COOH-capped NHC-Au13 cluster reveals a classic icosahedral core with one Au atom in its center. The icosahedral core is surrounded by five NHC ligands with pseudo C5 symmetry and exposed carboxyls in a pentagonal antiprism fashion. The detailed formula of the Au cluster was identified as Au13(bi-NHC carboxyl)5Cl2 (hereafter abbreviated as Au13-c). The density functional theory (DFT) calculations confirm that Au13-c is an electronically stable eight-electron super-atom cluster and elucidate its optical transitions in the UV-Vis range. The Au13-c cluster exhibits excellent thermal and chemical stability under bio-relevant conditions. Additionally, this cluster shows a strong red emission in DMF and H2O with an excellent quantum yield (QY) of 40% and 12.6%, respectively. The high QY of Au13-c enables its use in cell imaging on both cancer and noncancerous cells.

Novel Tripodal Polyamine Tris-Pyrene: DNA/RNA Binding and Photodynamic Antiproliferative Activity.

A novel tri-pyrene polyamine (TAL3PYR) bearing net five positive charges at biorelevant conditions revealed strong intramolecular interactions in aqueous medium between pyrenes, characterised by pronounced excimer fluorescence. A novel compound revealed strong binding to ds-DNA and ds-RNA, along with pronounced thermal stabilisation of DNA/RNA and extensive changes in DNA/RNA structure, as evidenced by circular dichroism. New dye caused pronounced ds-DNA or ds-RNA condensation, which was attributed to a combination of electrostatic interactions between 5+ charge of dye and negatively charged polynucleotide backbone, accompanied by aromatic and hydrophobic interactions of pyrenes within polynucleotide grooves. New dye also showed intriguing antiproliferative activity, strongly enhanced upon photo-induced activation of pyrenes, and is thus a promising lead compound for theranostic applications on ds-RNA or ds-DNA targets, applicable as a new strategy in cancer and gene therapy.

Aerosol technology to mimic dry powder inhalation in vitro using pulmonary cell models

Inhaled therapy confers key advantages for the treatment of topical pulmonary diseases and offers potential for systemic delivery of medicines. Dry powder inhalers (DPIs) are generally the preferred devices for pulmonary delivery due to improved stability and satisfactory patient compliance. However, the mechanisms governing drug powder dissolution and availability in the lung and poorly understood. Here, we report a new in vitro system to study epithelial absorption of inhaled dry powders in lung barrier models of the upper and lower airway. The system is based on a CULTEX® RFS (Radial Flow System) cell exposure module joined to a Vilnius aerosol generator and allows the coupling of drug dissolution and permeability assessments. The cellular models recapitulate the barrier morphology and function of healthy and diseased pulmonary epithelium and incorporate the mucosal barrier to enable the investigation of drug powder dissolution in biorelevant conditions. With this system, we found differences in permeability across the airway tree and pinpointed the impact of diseased barriers in paracellular drug transport. Furthermore, we identified a different rank order of permeability for compounds tested in solution or powder form. These results highlight the value of this in vitro drug aerosolization setup for use in research and development of inhaled medicines.

Effects of device settings and e-liquid characteristics on mouth-throat losses of nicotine delivered with electronic nicotine delivery systems (ENDS)

Currently it is not fully understood how the device settings and electronic liquid (e-liquid) composition, including their form of nicotine content, impact mouth and throat losses, and potentially lead to the variations in total nicotine delivery to the human lungs. An in situ size assessment method was developed for real-time measurements at the mouthpiece and outlet of a biorelevant mouth-throat to account for the dynamic nature of the aerosol. The aerosol size, temperature, and delivery through the mouth-throat replica and the exhaled aerosol between the puff intervals were measured at different wattages using various e-liquid compositions. The effects of body temperature and humidity on aerosol size and nicotine delivery were also explored to evaluate the importance of considering realistic in vivo conditions in in vitro measurements. Notably, in vitro tests with body temperature and humidity in mouth-throat model vs room conditions, resulted in larger aerosol size at the end of the throat (Dv50 = 5.83 ± 0.33 μm vs 3.05 ± 0.15 μm), significantly higher thoracic nicotine delivery (>90% vs 50–85%) potentially due to the lower exhaled amount (<10% vs 15–50%). Besides, higher VG/PG ratios resulted in significantly lower exhaled amount and higher mouth-throat nicotine deposition. One of the main outcomes of the study was finding significantly lower exhaled amount and higher thoracic nicotine delivery with nicotine salt form vs free-base. Considering body temperature and humidity also showed significant enhancement in nicotine delivery, so it is essential to account for biorelevant experimental conditions in benchtop testing.

Development and in-vitro evaluation of chitosan and glyceryl monostearate based matrix lipid polymer hybrid nanoparticles (LPHNPs) for oral delivery of itraconazole

Itraconazole (ICZ) is a broad spectrum antifungal drug, but used as second or third line therapy due to its low and erratic oral bioavailability. This work was carried out to prepare and characterize matrix type lipid-polymer hybrid nanoparticles (LPHNPs) for dissolution enhancement of ICZ. LPHNPs were prepared using solvent diffusion/emulsification technique. Matrix LPHNPs were composed of chitosan (polymer), glyceryl monostearate (lipid) and poloxamer 188 (stabilizer). LPHNPs loaded with ICZ (LPHNPs-1, LPHNPs-2, LPHNPs-3 and LPHNPs-4) were developed using varying concentration of chitosan whereas LPHNPs (LPHNPs-5, LPHNPs-6, LPHNPs-7 and LPHNPs-8) were prepared using varying concentrations of poloxamer 188. LPHNPs loaded with ICZ were further evaluated for entrapment efficiency, particle size, polydispersity index (PDI), zeta potential and dissolution profiles at biorelevant pH conditions. The particle size (LPHNPs-1 to LPHNPs-4) was found to be in range of 421–588 nm with PDI values 0.34–0.41. The particles size of LPHNPs-5 to LPHNPs-8 was found to be in range of 489–725 nm with PDI 0.34–0.74. The entrapment efficiency of LPHNPs-1 to LPHNPs-4 was found to be in range of 85.21%–91.34%. The entrapment efficiency of LPHNPs-5 to LPHNPs-8 was found to be in range 78.32%–90.44%. . The scanning electron microscopy of optimized formulations LPHNPs-1 and LPHNPs-5 indicated formation of oval shaped nanoparticles. DSC thermogram of ICZ loaded LPHNPs also depicted the conversion of crystalline form of ICZ into amorphous form demonstrating the internalization and dissolution enhancement of drug in the hybrid matrix. The cumulative drug dissolved at acidic pH 1.2 was found to be 23.3% and 19.8% for LPHNPs-1 and LPHNPs-5 respectively. Similarly at basic pH values 7.4, cumulative amount of drug dissolved was 90.2% and 83.4% for LPHNPs-1 and LPHNPs-5 respectively. Drug dissolution kinetics exhibited fickian diffusion best described by Korse-meyer Peppas model. The results suggested that chitosan and glyceryl monostearate based matrix LPHNPs could be used as promising approach for dissolution enhancement of ICZ which could further increase its bioavailability.

Synthesis, characterisation and biological evaluation of monometallic Re(I) and heterobimetallic Re(I)/Fe(II) complexes with a 1,2,3-triazolyl pyridine chelating moiety.

Bioorganometallic complexes have attracted considerable interest and have shown promise for potential application in the treatment and diagnosis of cancer, as well as bioimaging agents, some acting as theranostic agents. The series of novel ferrocene, benzimidazo[1,2-a]quinoline and fluorescein derivatives with bidentate pyridyl-1,2,3-triazole and 2,2'-dipyridylamine and their tricarbonylrhenium(I) complexes was prepared and fully characterised by NMR, single-crystal X-ray diffraction, UV-Vis and fluorescence spectroscopy in biorelevant conditions. The fluorescein and benzimidazo[1,2-a]quinoline ligands and their complexes with Re(I) showed interactions with ds-DNA/RNA and HSA, characterised by thermal denaturation measurements, fluorimetric and circular dichroism titrations. The binding constants revealed that addition of Re(I) increases the affinity of fluorescein but decreases the affinity of benzimidazo[1,2-a]quinoline. The complexation of Re(I) had the opposite effect on fluorescein and benzimidazo[1,2-a]quinoline ligands' fluorimetric sensitivity upon biomacromolecule binding, Re(I) fluorescein complex emission being strongly quenched by DNA/RNA or HSA, while emission of Re(I) benzimidazo[1,2-a]quinolone complex was enhanced, particularly for HSA, making it a promising fluorescent probe. Some mono- and heterobimetallic complexes showed considerable antiproliferative activity on colon cancer cells (CT26 and HT29), with ferrocene dipyridylamine complexes exhibiting the best inhibitory activity, comparable to cisplatin. The correlation of the cytotoxicity data with the linker type between the ferrocene and the 1,2,3-triazole ring suggests that direct binding of the metallocene to the 1,2,3-triazole is favourable for antitumor activity. The Re(I) benzimidazo[1,2-a]quinolone complex showed moderate antiproliferative activity, in contrast to the Re(I) fluorescein complex, which exhibited weak activity on CT26 cells and no activity on HT29 cells. The accumulation of the Re(I) benzimidazo[1,2-a]quinolone complex in the lysosomes of CT26 cells indicates the site of its bioactivity, thus making this complex a potential theranostic agent.

Structuring and De-Structuring of Nanovectors from Algal Lipids: Simulated Digestion, Preliminary Antioxidant Capacity and In Vitro Tests.

Biocompatible nanocarriers can be obtained by lipid extraction from natural sources such as algal biomasses, which accumulate different lipid classes depending on the employed culture media. Lipid aggregates can be distinguished according to supramolecular architecture into lamellar and nonlamellar structures. This distinction is mainly influenced by the lipid class and molecular packing parameter, which determine the possible values of interfacial curvature and thus the supramolecular symmetries that can be obtained. The nanosystems prepared from bio-sources are able to self-assemble into different compartmentalized structures due to their complex composition. They also present the advantage of increased carrier-target biocompatibility and are suitable to encapsulate and vehiculate poorly water-soluble compounds, e.g., natural antioxidants. Their functional properties stem from the interplay of several parameters. Following previous work, here the functionality of two series of structurally distinct lipid nanocarriers, namely liposomes and cubosomes deriving from algal biomasses with different lipid composition, is characterized. In the view of their possible use as pharmaceutical or nutraceutical formulations, both types of nanovectors were loaded with three well-known antioxidants, i.e., curcumin, α-tocopherol and piperine, and their carrier efficacy was compared considering their different structures. Firstly, carrier stability in biorelevant conditions was assessed by simulating a gastrointestinal tract model. Then, by using an integrated chemical and pharmacological approach, the functionality in terms of encapsulation efficiency, cargo bioaccessibility and kinetics of antioxidant capacity by UV-Visible spectroscopy was evaluated. Subsequently, in vitro cytotoxicity and viability tests after administration to model cell lines were performed. As a consequence of this investigation, it is possible to conclude that nanovectors from algal lipids, i.e., cubosomes and liposomes, can be efficient delivery agents for lipophilic antioxidants, being able to preserve and enhance their activity toward different targets while promoting sustained release.

Dissolution of a Biopharmaceutics Classification System Class II Free Acid from Immediate Release Tablets Containing a Microenvironmental pH Modulator: Comparison of a Biorelevant Bicarbonate Buffering System with Phosphate Buffers

Poor water dissolution of active pharmaceutical ingredients (API) limits the rate of absorption from the gastrointestinal tract. Increasing the pH of a solid form microenvironment can enhance the dissolution of weakly acidic drugs, but data on this phenomenon in a physiologically relevant bicarbonate media are lacking. In this paper, we examined the effect of a microenvironmental pH modulator (Na2HPO4) on the dissolution of a Biopharmaceutics Classification System (BCS) class II free weak acid (ibuprofen) at biorelevant conditions, including an automatic bicarbonate buffering system, as well as in compendial (50 mM) and low-concentration (10 mM) phosphate buffers with no external pH control. The tablets of 200 mg ibuprofen with either Na2HPO4 (phosphate formulation, PF) or NaCl (reference formulation, RF) were manufactured using a compression method. In a pH 2 simulated gastric fluid, only PF produced a transient supersaturation of ibuprofen, dissolving a fourfold higher drug amount than RF. In a bicarbonate-buffered simulated intestinal fluid with a dynamically controlled pH (5.7, 7.2, and 5.8 to 7.7 gradient), PF dissolved more drug within 30 min than RF (p ≤ 0.019). Of note, the use of a 50 mM phosphate buffer pH 7.2 provided opposite results—RF dissolved the API much faster than PF. Moreover, 10 mM phosphate buffers of pH 5.6 and 7.2 could neither maintain a constant pH nor mimic the bicarbonate buffer performance. In conclusion, the use of a bicarbonate-buffered intestinal fluid, instead of phosphate buffers, may be essential in dissolution tests of BCS class II drugs combined with pH modulators.Graphical abstract

Low-Toxicity Sulfonium-Based Probes for Cysteine-Specific Profiling in Live Cells.

Despite being a low-abundance amino acid, cysteine plays an essential role in regulating protein function and serves as a satisfactory target of post-translational modifications and drug developments. To comprehensively assess reactive-cysteine-containing proteins, the development of chemical proteomic probes to label cysteine residues in human cells is an important objective. Cysteine modification using sulfonium-based probes is a novel method to identify reactive cysteine residues in proteins. Herein, we reported a set of "cysteine-reactive sulfonium-based (C-Sul)" probes to label the reactive cysteine sites in cellular proteins. Notably, water-soluble C-Sul probes have a significantly enhanced stability and cellular uptakes, displaying a high specificity toward reactive cysteines and compatibility with quantitative proteomic profiling. In comparison to the conventional iodoacetamide-based probe, C-Sul particularly has no inhibitory effects on cell viability, enabling its application in proteomic profiling of reactive cysteine residues under biorelevant conditions. We propose C-Sul probes as optimal tools of cysteine profiling for further broadly basic research.

Tablet Disintegration and Dispersion under In Vivo-like Hydrodynamic Conditions.

Disintegration and dispersion are functional properties of tablets relevant for the desired API release. The standard disintegration test (SDT) described in different pharmacopoeias provides only limited information on these complex processes. It is considered not to be comparable to the biorelevant conditions due to the frequent occurrence of high hydrodynamic forces, among other reasons. In this study, 3D tomographic laser-induced fluorescence imaging (3D Tomo-LIF) is applied to analyse tablet disintegration and dispersion. Disintegration time (DT) and time-resolved particle size distribution in close proximity to the tablet are determined in a continuously operated flow channel, adjustable to very low fluid velocities. A case study on tablets of different porosity, which are composed of pharmaceutical polymers labelled with a fluorescent dye, a filler, and disintegrants, is presented to demonstrate the functionality and precision of the novel method. DT results from 3D Tomo-LIF are compared with results from the SDT, confirming the analytical limitations of the pharmacopoeial disintegration test. Results from the 3D Tomo-LIF method proved a strong impact of fluid velocity on disintegration and dispersion. Generally, shorter DTs were determined when cross-linked sodium carboxymethly cellulose (NaCMCXL) was used as disintegrant compared to polyvinyl polypyrrolidone (PVPP). Tablets containing Kollidon VA64 were found to disintegrate by surface erosion. The novel method provides an in-depth understanding of the functional behaviour of the tablet material, composition and structural properties under in vivo-like hydrodynamic forces regarding disintegration and the temporal progress of dispersion. We consider the 3D Tomo-LIF in vitro method to be of improved biorelevance in terms of hydrodynamic conditions in the human stomach.

Performance Evaluation of Montelukast Pediatric Formulations: Part I\u2014Age-Related In Vitro Conditions

This study aimed to explore the potential of biopharmaceutics in vitro tools to predict drug product performance in the pediatric population. Biorelevant dissolution set-ups were used to predict how age and medicine administration practices affect the in vitro dissolution of oral formulations of a poorly water-soluble compound, montelukast. Biorelevant age-appropriate dissolution studies of Singulair® (granules and chewable tablets) were conducted with the µDISS profiler™, USP 4 apparatus, USP 2 apparatus, and mini-paddle apparatus. Biorelevant simulating fluids representative of adult and pediatric conditions were used in the dissolution studies. The biorelevant dissolution conditions were appropriately selected (i.e. volumes, transit times, etc.) to mimic the gastrointestinal conditions of each of the subpopulations tested. Partial least squares regression (PLS-R) was performed to understand the impact of in vitro variables on the dissolution of montelukast. Montelukast dissolution was significantly affected by the in vitro hydrodynamics used to perform the dissolution tests (µDISS profiler™: positive effect); choice of simulation of gastric (negative effect) and/or intestinal conditions (positive effect) of the gastrointestinal tract; and simulation of prandial state (fasted state: negative effect, fed state: positive effect). Age-related biorelevant dissolution of Singulair® granules predicted the in vivo effect of the co-administration of the formulation with applesauce and formula in infants. This study demonstrates that age-appropriate biorelevant dissolution testing can be a valuable tool for the assessment of drug performance in the pediatric population.Graphical

Injectable drug delivery systems of doxorubicin revisited: In vitro-in vivo relationships using human clinical data

A growing number of nanomedicines entered the clinical trials and improved our understanding of the in vivo responses expected in humans. The in vitro drug release represents an important critical quality attribute involved in pharmacokinetics. Establishing in vitro-in vivo relationships for nanomedicines requires a careful analysis of the clinical data with respect to the unique differences between drugs and nanomedicines. Also, the biorelevant assay must reflect the release mechanism of the carrier. Four drug delivery systems of doxorubicin were evaluated for their in vitro release behavior under biorelevant conditions using the dispersion releaser. The pharmacokinetics observed during the first-in-men clinical trials were analyzed using a custom-made physiologically-based nanocarrier biopharmaceutics model. The drug product Lipodox® and the clinical candidate NanoCore-7.4 were evaluated to validate the model. Afterward, the in vivo performances of the preclinical candidates NanoCore-6.4 and doxorubicin-loaded nano-cellular vesicle technology systems (an extracellular vesicle preparation) were predicted. In vitro and in vivo release were in good correlation as indicated by the coefficients of determination of 0.98648 (NanoCore-7.4) and 0.94107 (Lipodox®). The predictions required an estimation of the carrier half-life in blood circulation leading to considerable uncertainty. Still, the simulations narrow down the possible scenarios in the clinical evaluation of nanomedicines and provide a valuable addition to animal studies.

Development of a furosemide-containing expandable system for gastric retention

More than 50 years ago, the first gastroretentive dosage forms came up. Since then, no practical and at the same time reliable gastroretentive system is available on market. A major obstacle in the development of novel gastroretentive systems is the lack of proper predictive test methods. In the present work, we aimed at developing and fully characterizing an expandable gastroretentive system containing furosemide as model drug. On the one hand, we used well-established in vitro tests for drug dissolution and gastroretentive properties (paddle apparatus, swelling characteristics). On the other hand, we used two novel models (dissolution stress test device, mechanical antrum model) to assess these properties under biorelevant conditions. Moreover, we performed an in vivo study under fed and fasted conditions that combined blood sampling and a high-resolution imaging technique (magnetic marker monitoring) to determine gastrointestinal location with the assessment of a pharmacodynamic endpoint (urinary sodium excretion). In vitro dissolution tests confirmed prolonged drug release over more than 8 h independent from pH and with slight pressure sensitivity. Swelling studies indicated good swelling behavior within 4 h along with medium gastroretentive properties as determined with the mechanical antrum model. In vivo imaging showed prolonged gastric residence time after fed compared to fasted administration (481 min vs 38 min). Comparison of geometric means of AUCo-tlast of the model drug confirmed this observation with 10 times higher value after fed administration. Urinary excretion of sodium well reflected the increased sodium-reuptake inhibition due to higher furosemide exposure under fed conditions.However, the poor performance after fasted intake of the system is in line with data from several other gastroretentive formulations. The present study highlighted the value of novel test methods during the development of gastroretentive formulations. Yet, a system with reproducible gastroretentive properties especially under fasted conditions has to be designed.

Polyvinyl-Pyrrolidone-Coated Silver Nanoparticles-The Colloidal, Chemical, and Biological Consequences of Steric Stabilization under Biorelevant Conditions.

(1) Background: Several properties of silver nanoparticles (AgNPs), such as cytotoxic, anticancer, and antimicrobial activities, have been subjects of intense research; however, important aspects such as nanoparticle aggregation are generally neglected, although a decline in colloidal stability leads to a loss of the desired biological activities. Colloidal stability is affected by pH, ionic strength, or a plethora of biomolecules that interact with AgNPs under biorelevant conditions. (2) Methods: As only a few studies have focused on the relationship between aggregation behavior and the biological properties of AgNPs, here, we have systematically evaluated this issue by completing a thorough analysis of sterically (via polyvinyl-pyrrolidone (PVP)) stabilized AgNPs that were subjected to different circumstances. We assessed ultraviolet–visible light absorption, dynamic light scattering, zeta potential measurements, in vitro cell viability, and microdilution assays to screen both colloidal stability as well as bioactivity. (3) Results: The results revealed that although PVP provided outstanding biorelevant colloidal stability, the chemical stability of AgNPs could not be maintained completely with this capping material. (4) Conclusion: These unexpected findings led to the realization that stabilizing materials have more profound importance in association with biorelevant applications of nanomaterials than just being simple colloidal stabilizers.

Impact of surfactant selection and incorporation on in situ nanoparticle formation from amorphous solid dispersions

Spray dried amorphous solid dispersions (ASDs) stand as one of the most effective formulation strategies to address issues of low aqueous solubility when developing new chemical entities.An emerging research topic focusing on the formation of amorphous nanoparticles or nanodroplets from ASD formulations has attracted attention recently. These ASD nanoparticlescan be highly beneficial and able to further increase oral bioavailability. The incorporation of surfactants in ASD formulations has been shown to facilitate the formation of these nanoparticles. Therefore, understanding the mechanism of surfactant-promoted nanoparticle formation becomes critical for the rational design of ASD formulations. This work demonstrated the importance of inclusion of the surfactant within the ASD composition for nanoparticle formation. In contrast, when a surfactant is added externally (e.g., by inclusion in the dosing vehicle), only a limited degree of nanoparticle formation was observed even at the optimized surfactant-to-drug ratios. A variety of different surfactants were also assessed for understanding their impact on ASD nanoparticle formation. The spray drying systems containing nonionic surfactants, Tween 80 and Vitamin E TPGS, produced higher amounts of in situ ASD nanoparticles when compared to an anionic surfactant, sodium lauryl sulfate (SLS). The ASD nanoparticles produced by the Genentech developmental compound, GDC-0334, were highly stable and retained their original particle size and amorphous feature for at least 18 h under biorelevant conditions. The high degree of nanoparticle formation from spray dried GDC-0334 containing Tween 80 combined with the superior physical stability of the nanoparticles also translated to enhanced in vivo performance in a rat pharmacokinetics study.