Bioreactor Technology Research Articles

Wastewater Treatment Using Membrane Bioreactor Technologies: Removal of Phenolic Contaminants from Oil and Coal Refineries and Pharmaceutical Industries.

Huge amounts of noxious chemicals from coal and petrochemical refineries and pharmaceutical industries are released into water bodies. These chemicals are highly toxic and cause adverse effects on both aquatic and terrestrial life. The removal of hazardous contaminants from industrial effluents is expensive and environmentally driven. The majority of the technologies applied nowadays for the removal of phenols and other contaminants are based on physio-chemical processes such as solvent extraction, chemical precipitation, and adsorption. The removal efficiency of toxic chemicals, especially phenols, is low with these technologies when the concentrations are very low. Furthermore, the major drawbacks of these technologies are the high operation costs and inadequate selectivity. To overcome these limitations, researchers are applying biological and membrane technologies together, which are gaining more attention because of their ease of use, high selectivity, and effectiveness. In the present review, the microbial degradation of phenolics in combination with intensified membrane bioreactors (MBRs) has been discussed. Important factors, including the origin and mode of phenols' biodegradation as well as the characteristics of the membrane bioreactors for the optimal removal of phenolic contaminants from industrial effluents are considered. The modifications of MBRs for the removal of phenols from various wastewater sources have also been addressed in this review article. The economic analysis on the cost and benefits of MBR technology compared with conventional wastewater treatments is discussed extensively.

Production of Bioactive Porcine Lactoferrin through a Novel Glucose-Inducible Expression System in Pichia pastoris: Unveiling Antimicrobial and Anticancer Functionalities.

Lactoferrin (LF) stands as one of the extensively investigated iron-binding glycoproteins within milk, exhibiting diverse biological functionalities. The global demand for LF has experienced consistent growth. Biotechnological strategies aimed at enhancing LF productivity through microbial expression systems offer substantial cost-effective advantages and exhibit fewer constraints compared to traditional animal bioreactor technologies. This study devised a novel recombinant plasmid, wherein the AOX1 promoter was replaced with a glucose-inducible G1 promoter (PG1) to govern the expression of recombinant porcine LF (rpLF) in Pichia pastoris GS115. High-copy-number PG1-rpLF yeast clones were meticulously selected, and subsequent induction with 0.05 g/L glucose demonstrated robust secretion of rpLF. Scaling up production transpired in a 5 L fermenter, yielding an estimated rpLF productivity of approximately 2.8 g/L by the conclusion of glycerol-fed fermentation. A three-step purification process involving tangential-flow ultrafiltration yielded approximately 6.55 g of rpLF crude (approximately 85% purity). Notably, exceptional purity of rpLF was achieved through sequential heparin and size-exclusion column purification. Comparatively, the present glucose-inducible system outperformed our previous methanol-induced system, which yielded a level of 87 mg/L of extracellular rpLF secretion. Furthermore, yeast-produced rpLF demonstrated affinity for ferric ions (Fe3+) and exhibited growth inhibition against various pathogenic microbes (E. coli, S. aureus, and C. albicans) and human cancer cells (A549, MDA-MB-231, and Hep3B), similar to commercial bovine LF (bLF). Intriguingly, the hydrolysate of rpLF (rpLFH) manifested heightened antimicrobial and anticancer effects compared to its intact form. In conclusion, this study presents an efficient glucose-inducible yeast expression system for large-scale production and purification of active rpLF protein with the potential for veterinary or medical applications.

A novel modular opto-biomechatronics bioreactor for simultaneous isotropic mechanical stretch application and fluorescence microscopy under cell and tissue culture conditions

Mechanical stresses are an environmental challenge virtually all tissues in the body are exposed to and thus, are of fundamental interest to study cell reactions in mechanobiology. Yet, unlike acute short-term mechanical cell stimulations, long-term or cyclic mechano-stimulation as experienced in the body is difficult to reproduce. Bioreactors are designed to control cell culture conditions, but still, there are yet no technical solutions available to merge bioreactor and opto-biomechatronics technologies for cyclic stretch-applications and simultaneous live cell imaging. To close this gap, we have engineered an opto-biomechatronics module, consisting of our in-house developed IsoStretcher technology and customised epifluorescence optics, into an automated bioreactor platform. For this, redesigned polydimethylsiloxane (PDMS) chambers with closed geometry (∽700μL internal volume) to warrant sterile operation were developed. Those chambers could be flushed with cell solution for cell seeding in a sterile manner. The epifluorescence imaging module was engineered into the reactor underneath the IsoStretcher to allow for continuous image acquisition during long-term stretch cycles (hours to days). The system was validated on human fibroblast BJ foreskin cells, and Cal-520 Ca2＋ fluorescence was stably imaged using our in-built autofocus functionality. Cultures for 24h within the IsoStretcher-bioreactor preserved a normal cell morphology as compared to external incubator control cultures. Isotropic stretch was reliably transferred to the cell membranes. Our system with in-built bioreactor and opto-biomechatronics functionality provides a holistic technology platform for the growing field of mechanobiology to allow long-term observations of cultured single cells and confluent cell layers that are subjected to cyclic long-term isotropic stretch protocols.

Efficacy, immunogenicity, and virus shedding in broiler chickens inoculated with live attenuated fowl adenovirus serotype 8b propagated a bioreactor.

Fowl adenovirus (FAdV) 8b causes huge economic losses in the poultry industry worldwide. Attenuated FAdV 8b could be useful in preventing FAdV infections globally and scale-up obstacles could be solved by bioreactor technology. This study was carried out to attenuate the FAdV 8b isolate, propagate it in a bioreactor, molecularly characterize the passage isolates, and determine the immunogenicity, efficacy, and shedding of the virus of chickens. FAdV serotype 8b (UPM11142) isolate was passaged on chicken embryo liver (CEL) cells until attenuation and propagated in a bioreactor (UPM11142P20B1). Hexon and fiber genes of the isolates were sequenced and analyzed. UPM11142P20B1 was administered to 116-day-old broiler chickens divided into four groups, A (control), B (non-booster), C (booster with UPM11142P20B1), and D (booster with inactivated UPM11142P5B1). Eight chickens from each group were challenged. Body weight (BW) and liver weight (LW), liver: BW ratio (LBR), FAdV antibody titer, T lymphocyte sub-populations in the liver, spleen and thymus; and challenge virus load in the liver and shedding in cloaca were measured at weekly intervals. The isolate caused typical cytopathic effects on CEL cells typical of FAdV. Novel molecular changes in the genes occurred which could be markers for FAdV 8b attenuation. BW, LW, and LBR were similar among groups throughout the trial but the uninoculated control-challenged group (UCC) had significantly higher LBR than the inoculated and challenged groups at 35 dpi. Non-booster group had higher FAdV antibodies at all time points than the uninoculated control group (UCG); and the challenged booster groups had higher titer at 35 dpi than UCC. T lymphocytes increased at different time-points in the liver of inoculated chickens, and in the spleen and thymus as well, and was higher in the organs of inoculated challenged groups than the UCC. There was a significantly higher challenge virus load in the liver and cloaca of UCC chickens than in the non-booster chickens. UPM11142P20B1 was safe, efficacious, significantly reduced shedding, and is recommended as a candidate vaccine in the prevention and control of FAdV 8b infections in broiler chickens.

Deep Learning for Strain Field Customization in Bioreactor with Dielectric Elastomer Actuator Array.

In the field of biomechanics, customizing complex strain fields according to specific requirements poses an important challenge for bioreactor technology, primarily due to the intricate coupling and nonlinear actuation of actuator arrays, which complicates the precise control of strain fields. This paper introduces a bioreactor designed with a 9×9 array of independently controllable dielectric elastomer actuators (DEAs), addressing this challenge. We employ image regression-based machine learning for both replicating target strain fields through inverse control and rapidly predicting feasible strain fields generated by the bioreactor in response to control inputs via forward control. To generate training data, a finite element analysis (FEA) simulation model was developed. In the FEA, the device was prestretched, followed by the random assignment of voltages to each pixel, yielding 10,000 distinct output strain field images for the training set. For inverse control, a multilayer perceptron (MLP) is utilized to predict control inputs from images, whereas, for forward control, MLP maps control inputs to low-resolution images, which are then upscaled to high-resolution outputs through a super-resolution generative adversarial network (SRGAN). Demonstrations include inputting biomechanically significant strain fields, where the method successfully replicated the intended fields. Additionally, by using various tumor-stroma interfaces as inputs, the bioreactor demonstrated its ability to customize strain fields accordingly, showcasing its potential as an advanced testbed for tumor biomechanics research.

Advancements and Challenges in Membrane Bioreactor Technology for Industrial Wastewater Treatment

Due to its success in achieving the majority of wastewater treatment objectives, Membrane Bioreactor Technology (MBR) has replaced the Conventional Activated Sludge Process (CAS) as the leading method for treating wastewater. Nowadays, the treatment of industrial wastewater become one of the world’s major concerns, MBR technologies are used more frequently. This technology has a bright future in wastewater treatment (especially industrial wastewater). In general, this article is designed to give a general view of various aspects of an MBR, with the aim of addressing and overcoming any potential drawbacks or limitations. In this work, the fouling in MBR technology its variations and mechanisms, influencing factors are also discussed in detail. However, membrane fouling is thought to be the biggest challenge this technology faces. One of the main agents that causes the fouling of the membrane is Extracellular Polymeric Substances (EPS), which results in a decrease in filterability and a decline in membrane flux, which affects the membrane lifespan. Furthermore, it looks into how to minimize membrane fouling in MBR systems and offers biological tactics to lessen the likelihood of membrane fouling in MBR technology. Finally, this work quoted also how artificial technology might help to increase removal effectiveness and prevent filtering membrane obstruction.

Study on rapid multiplication of two hybrid Arabica coffee varieties F1 Centroamericano (H1) and Mundo Maya (H16) through somatic embryogenesis and Bioreactor technology

In this paper, the research focuses on determining some components and culture conditions in order to optimise the 4 main steps of somatic embryogenesis and embryo regeneration by Bioreactor of two Arabica F1 coffee varieties H1 and H16, including: (1) formation of embryogenic callus, (2) multiplication of embryogenic cells, (3) embryonic differentiation, and (4) regeneration of somatic embryo using the temporary immersion Bioreactor RITA 1L. The results showed that on the medium supplemented with Kinetin 2 mg/ll and Phytagel 4 g/l, the callus formation rate reached 94.2 and 92.1% for 2 varieties H1 and H16, respectively. Besides, the addition of Glycine 20 mg/l to the culture medium increased the embryogenic callus rate by 58.1% in both varieties. Adding Trichostatin A 0.03 mg/l in the embryo differentiation medium in the first 7 days of culture showed that the number of torpedo embryos was scored from 1g of initial callus up to 1287 in H1 and 1635 in H16. Finally, using Bioreactor 1L-RITA, soaking for 1 min every 6 hours, the regeneration efficiency reached 75.02% in H1 and 82.03% in H16.

Combined recovery of polyhydroxyalkanoates and reclaimed water in the mainstream of a WWTP for agro-food industrial wastewater valorisation by membrane bioreactor technology

The present study investigated the combined production of reclaimed water for reuse purposes and polyhydroxyalkanoates (PHA) from an agro-food industrial wastewater. A pilot plant implementing a two-stage process for PHA production was studied. It consisted of a mainstream sequencing batch membrane bioreactor (SBMBR) in which selection of PHA-accumulating organisms and wastewater treatment were carried out in, and a side-stream fed-batch reactor (FBR) where the excess sludge from the SBMBR was used for PHA accumulation. The performance of the SBMBR was compared with that of a conventional sequencing batch reactor (SBR) treating the same wastewater under different food to microorganisms’ ratios (F/M) ranging between 0.125 and 0.650 kgCOD kgTSS−3 d−1. The SBMBR enabled to obtain very high-quality effluent in compliance with the relevant national (Italy) and European regulations (Italian DM 185/03 and EU, 2020/741) in the field of wastewater reclamation, whereas the performances in the SBR collapsed at F/M higher than 0.50 kgCOD kgTSS−1d−1.A maximum intracellular storage of 45% (w/w) and a production yield of 0.63 gPHA L−1h−1 were achieved when the SBMBR system was operated with a F/M ratio close to 0.50 kgCOD kgTSS−1d−1. This resulted approximately 35% higher than those observed in the SBR, since the ultrafiltration membrane avoided the washout of dispersed and filamentous bacteria capable of storing PHA.Furthermore, while maximizing PHA productivity in conventional SBR systems led to process dysfunctions, in the SBMBR system it helped mitigate these issues by reducing membrane fouling behaviour. The results of this study supported the possibility to achieve combined recovery of reclaimed water and high-value added bioproducts using membrane technology, leading the way for agro-food industrial wastewater valorization in the frame of a circular economy model.

Scalable generation of functional human iPSC-derived CAR-macrophages that efficiently eradicate CD19-positive leukemia

BackgroundMacrophages have recently become attractive therapeutics in cancer immunotherapy. The potential of macrophages to infiltrate and influence solid malignancies makes them promising targets for the chimeric antigen receptor (CAR) technology...

Recent Strategies for the Remediation of Textile Dyes from Wastewater: A Systematic Review.

The presence of dye in wastewater causes substantial threats to the environment, and has negative impacts not only on human health but also on the health of other organisms that are part of the ecosystem. Because of the increase in textile manufacturing, the inhabitants of the area, along with other species, are subjected to the potentially hazardous consequences of wastewater discharge from textile and industrial manufacturing. Different types of dyes emanating from textile wastewater have adverse effects on the aquatic environment. Various methods including physical, chemical, and biological strategies are applied in order to reduce the amount of dye pollution in the environment. The development of economical, ecologically acceptable, and efficient strategies for treating dye-containing wastewater is necessary. It has been shown that microbial communities have significant potential for the remediation of hazardous dyes in an environmentally friendly manner. In order to improve the efficacy of dye remediation, numerous cutting-edge strategies, including those based on nanotechnology, microbial biosorbents, bioreactor technology, microbial fuel cells, and genetic engineering, have been utilized. This article addresses the latest developments in physical, chemical, eco-friendly biological and advanced strategies for the efficient mitigation of dye pollution in the environment, along with the related challenges.

Growth Performance and Biochemical Composition of Nile Tilapia (Oreochromis niloticus) Reared in Membrane Bioreactor Treated Wastewater

The aquaculture sector in Africa has great potential for growth; however, it faces several challenges, one of them being the scarcity of clean water. This prompts the need for water recycling. The present study was conducted to investigate the effects of rearing Nile tilapia (Oreochromis niloticus) using municipal wastewater treated with membrane bioreactor (MBR) technology. A total of 270 Nile tilapia fingerlings (0.15±0.05 g) were reared in three treatment groups in triplicate. There were 2 treatments, including; MBR treated wastewater and stabilization pond treated wastewater (maturation pond), while the municipal tap water was used as the control. The growth performance (weight and length) of the fish was monitored over a 24-week period. After the experimental period, the biochemical composition of the fish muscle was analysed using standard AOAC methods. The results showed that the highest weight gain, length gain, survival rate, and specific growth were obtained in the fish in the control followed by the MBR treatment. Additionally, the crude protein, as well as the crude fiber and dry matter, were significantly higher in the fish in the maturation ponds at 23.10%, 0.29%, and 25.35%, respectively, while the crude ash was highest in the MBR at 1.22%. Results also showed that the MBR and maturation pond treatments meet the permissible levels for BOD, COD, NH4, and NO3 for water to be used in aquaculture. The bioaccumulation of heavy metals in the fish was mainly from the feed, with copper being the highest contaminant at 1.75 mg/100 g. In conclusion, both the MBR and maturation pond treated wastewater are viable for use in the rearing of Nile tilapia without adverse effect on the growth. However, MBR treatment showed better growth performance, suggesting that it could be used to increase productivity in fish farming.

Evaluating membrane bioreactor treatment for the elimination of emerging contaminants using different analytical methods

Since wastewater treatment plants (WWTPs) were not originally designed to eliminate contaminants of emerging concern (CECs), alternative strategies like membrane bioreactor (MBR) technology are gaining importance in achieving effective CEC removal and minimising their environmental impact. In this study, composite wastewater samples were collected from the biggest WWTP in the Basque Country (Galindo, Biscay) and the performance of two secondary treatments (i.e. conventional activated sludge treatment, CAS, and MBR) was assessed. The combination of a suspect screening approach using liquid chromatography tandem high-resolution mass spectrometry (LC-HRMS) and multitarget analysis by gas chromatography-mass spectrometry (GC-MS) allowed the detection of approximately 200 compounds in the WWTP effluents. The estimated removal efficiencies (REs) revealed that only 16 micropollutants exhibited enhanced removal by MBR treatment (RE > 70% or 40 – 60%). The environmental risk posed by the non-eliminated compounds after both treatments remained similar, being anthracene, clarithromycin, bis(2-ethylhexyl) phthalate (DEHP) and dilantin the most concerning pollutants (RQ > 1). The Microtox® bioassay confirmed the MBR’s efficiency in removing baseline toxicity, while suggesting a similar performance of CAS treatment. These minimal differences between treatments call into question the worthiness of MBR treatment and emphasise the need to seek more efficient alternative treatment methods.

Effect of sludge biochar on methane production from anaerobic granular sludge

Biochar has been documented to enhance the performance of anaerobic digestion, a technique extensively utilized in the initial treatment of highly concentrated wastewater. However, the impact of biochar derived from sewage sludge on the digestion efficiency of anaerobic granules has not been previously explored. In this investigation, we introduced sewage sludge-derived biochar into the anaerobic digestion process, incorporating it with anaerobic granular sludge, to assess its effect on methane generation. As the pyrolysis temperature escalated, there was an increase in both the levels of heavy metals and the pH, factors that hindered methane generation from anaerobic granules. Methane generation from the established anaerobic granular sludge remained unaffected by the presence of biochar. However, concerning the free anaerobic microorganisms responsible for methane production in the solution, biochar expedited electron transfer while impeding methane production by channeling more electrons towards sulfate reduction. The outcomes of this study offer a theoretical basis for the utilization of sewage sludge-derived biochar in bioreactor technology based on granular anaerobic sludge.

Bioprocess development for cord blood mesenchymal stromal cells on microcarriers in Vertical-Wheel bioreactors.

Equine mesenchymal stromal cells (MSCs) have been found to be beneficial for the treatment of many ailments, including orthopedic injuries, due to their superior differentiation potential and immunomodulating properties. Cell therapies require large cell numbers, which are not efficiently generated using conventional static expansion methods. Expansion of equine cord blood-derived MSCs (eCB-MSCs) in bioreactors, using microcarriers as an attachment surface, has the potential to generate large numbers of cells with increased reproducibility and homogeneity compared with static T-flask expansion. This study investigated the development of an expansion process using Vertical-Wheel (VW) bioreactors, a single-use bioreactor technology that incorporates a wheel instead of an impeller. Initially, microcarriers were screened at small scale to assess eCB-MSC attachment and growth and then in bioreactors to assess cell expansion and harvesting. The effect of different donors, serial passaging, and batch versus fed batch were all examined in 0.1 L VW bioreactors. The use of VW bioreactors with an appropriate microcarrier was shown to be able to produce cell densities of up to 1E6 cells/mL, while maintaining cell phenotype and functionality, thus demonstrating great potential for the use of these bioreactors to produce large cell numbers for cell therapies.

Anaerobic Membrane Bioreactor for Microalgae and Primary Sludge Co-Digestion at Pilot Scale: Instrumentation, Control and Automation Implementation, and Performance Assessment

Anaerobic membrane bioreactor (AnMBR) technology is gaining interest for circular economy integration in the water sector. However, its complexity, arising from the integration of anaerobic processes with membrane technology, poses a key challenge. Developing an appropriate instrumentation, control, and automation (ICA) system is essential for its reliable long-term operation. In this study, an ICA system was developed to successfully manage an AnMBR pilot plant co-digesting two waste streams (microalgae and primary sludge). The ICA implementation enabled its stable long-term operation for 576 days, ensuring the proper performance of biological and filtration processes and yielding 215 NmLCH4·gCODinf−1 at 35 °C. Variables such as temperature, oxidation-reduction potential, permeate flux and biogas flow were identified as key parameters and controlled. This included a 23% reduction in the integral of absolute error compared to a PID controller for permeate flow and the maintenance of a 0.5% standard deviation for digester temperature. These controls enabled AnMBR performance optimization, the rapid detection of process issues, and early corrective actions. As a start-up strategy to ensure proper filtration performance in the long term, critical flux tests were conducted, guaranteeing a competitive total annualized equivalent cost of 0.0016 EUR/m3 for optimal conditions. The study also calculated greenhouse gas emissions in different scenarios, proposing optimal and more sustainable pilot plant operations, mesophilic conditions, biogas upgrading through microalgae cultivation, and grid injection, reducing emissions by 423 kgCO2e·tCOD−1. To ensure the viability of emerging technologies such as AnMBR, proper start-up protocols are crucial, including favorable filtration and biological process operating conditions, ICA implementation, and key parameter control for technical, economic and environmental success.

Novel System for the Production of the Bioactive N-alkylamide ‘Spilanthol’ Through Somatic Embryogenesis in Acmella ciliata Kunth (Cass.)

Acmella ciliata Kunth (Cass.), a medicinally important plant in the family Asteraceae, has high commercial value because of its traditional phytomedicinal uses. The plant contains many phytochemicals like alkyl amides, alkaloids, tannins, saponins and flavonoids accountable for most of its pharmacological applications. The study presented here reports the callus culture and somatic embryogenesis of this plant thereby raising a novel system for the subsequent production of the N-alkyl amide ‘spilanthol’, the valuable secondary metabolite presents in it. Murashige and Skoog (MS) medium supplemented with auxins either alone or in combination with cytokinins were used for the induction and maturation of somatic embryos. MS medium supplemented with 2,4-D (0.5, 1.0 and 2.0 mg.L-1) produced black friable callus whereas, 1.0 mg.L-1 NAA in combination with 0.5 mg.L-1 BA induced white, slightly purple coloured friable callus which on further subculture to fresh medium induced somatic embryos that germinated into plantlets upon transfer to MS basal medium. The mode of regeneration via somatic embryogenesis was confirmed by histological analysis through free-hand sectioning and stereomicroscopic observation. The plantlets raised through somatic embryogenesis after a short hardening period, were found to acclimatise in the field at 83.33% efficiency and exhibited genetic uniformity with 96.6% similarity in the ISSR analysis. HPLC analysis of in vitro raised embryogenic callus showed 239.512 µg.g-1 spilanthol content which was comparatively higher than the mother plants (92.19 µg.g-1). The bioproduction of the N-alkylamide ‘spilanthol’ through embryogenic callus can be extended for the scale-up production of this bioactive compound using bioreactor technology for the formulation of phytodrugs.

A thermosensitive gel matrix for bioreactor-assisted in-cell NMR of nucleic acids and proteins

Introducing the flow through the bioreactor has revolutionized in-cell NMR spectroscopy by prolonging the measurement time available to acquire spectral information about biomacromolecules in metabolically active cells. Bioreactor technology relies on immobilizer matrices, which secure cells in the active volume of the NMR coil and enable uniform perfusion of the growth medium, supplying fresh nutrients to the cells while removing toxic byproducts of their metabolism. The main drawbacks of commonly used matrices include the inability to recover intact cells post-measurement for additional analyses and/or requirements for specific operating temperatures. Here, we report on the development and characterization of a set of thermosensitive and nontoxic triblock copolymers based on poly(D,L-lactide)-b-poly(ethylene glycol)-b-poly(D,L-lactide) (PLA-PEG-PLA). Here, we show for the first time that these copolymers are suitable as immobilizer matrices for the acquisition of in-cell NMR spectra of nucleic acids and proteins over a commonly used sample temperature range of 15–40 °C and, importantly, allow recovery of cells after completion of in-cell NMR spectra acquisition. We compared the performances of currently used matrices in terms of cell viability (dye exclusion assays), cellular metabolism (1D 31P NMR), and quality of in-cell NMR spectra of two model biomacromolecules (hybrid double-stranded/i-motif DNA and ubiquitin). Our results demonstrate the suitability and advantages of PLA-PEG-PLA copolymers for application in bioreactor-assisted in-cell NMR.

Invitro and Mass Multiplication of Cymbidium mastersii an Ornamental Orchid through Protocorm-like Body Formation

The epiphytic orchid species known as Cymbidium mastersii can only be found in the region of India known as Northeast India. The preservation of wild populations faces a significant obstacle in the form of a significant threat when it comes to the necessity of obtaining an additional source of the material required to fulfil commercial demands. The objective of this research was to build an in vitro system for the bulk multiplication of C. mastersii, and it was successful in that endeavour. This required the capacity to control the growth of the seedlings through the development of the primary protocorm and germination from a limited number of fruit capsules. Also necessary was the ability to limit the amount of fruit capsules that could be used. Each protocorm resulted in the production of a number of robust plantlings that, once they had been separated from their mother plant, flourished in the conditions of the greenhouse. The child plants, in terms of both their size and the development they underwent, were genetically identical to their parent plant. The streamlined process will make it possible to cultivate Cymbidium mastersii for use in the commercial sector, which will reduce the negative influence on remaining viable wild populations. We offer here for the very first time a method of producing C. mastersii on a commercial scale that makes use of bioreactor technology.

Bioregenerative algal architectures

Contemporary biospheres will be needed in terms of life support in the face of climatic consequences of the Anthropocene and to sustain future space travel. For life to flourish on Earth and beyond, key elements are required — including carbon, oxygen, hydrogen, nitrogen, sulfur, and phosphorous — which need to regenerate through physiochemical alliances and symbioses with other life forms. Bioregenerative systems are defined as artificial ecosystems, which are made up of intra-relationalities with various species including higher plants, microorganisms, and animals. In this paper, bioregenerative architectural habitats are considered a solution for a planet that faces substantial ecological damage and for the likelihood of multiplanetary inhabitation in future. Mutually beneficial systems incorporating working with microalgae in conjunction with bioreactor technologies could constitute a means of survival on a damaged planet or to help start multiplanetary colonies. This paper illustrates the potential of a non-anthropocentric, bioregenerative life support strategy working with various microalgae species. Past- and present-related bioregenerative systems are reviewed and future applications of microalgae enhancing a sympoietic alignment (collectively producing systems) of the human and nonhuman with microorganisms are considered. Future alliances with microalgae, Chlorella vulgaris, are proposed to work within bioregenerative systems on Earth and in space. This paper clarifies how the combination of technology, speculative architectural design and microalgae can enhance carbon dioxide mitigation, furthering gaseous exchange for life support, enabling human and nonhuman species to flourish in harsher environments on Earth and beyond low Earth orbit.

Integration of Membrane Bioreactor and Reverse Osmosis for Textile Wastewater Treatment and Reclamation: A Pilot-Scale Study

Membrane bioreactor (MBR) technology, a combination of traditional activated sludge and membrane filtration, has been widely used for industrial wastewater treatment and reclamation. This paper highlights a pilot-scale MBR system treating textile wastewater from a textile factory in Taiwan. Over 7 months of continuous operation, the average MBR influent chemical oxygen demand (COD) is 332 mg/L, and the average effluent COD is 38 mg/L, which results in approximately 88% COD removal. A reverse osmosis (RO) module is installed after 2 months of MBR operation and uses the MBR permeate as its influent. The RO produces pure water with average COD, conductivity, and color of 7 mg/L, 16 μS/cm, and 7 Pt-Co, respectively. The RO permeate is suitable for reuse in manufacturing processes, and the RO membrane shows stable performance with TMP, which is less than or equal to 0.5 kg/cm2 during the test. The study demonstrates the great feasibility of MBR combined with RO for treating and reclaiming textile wastewater.