Biometric Authentication Methods Research Articles

Identity verification method based on face and gait features in outdoor operation scenes

Identity verification method based on face and gait features in outdoor operation scenes

Automated Muzzle Detection and Biometric Identification via Few-Shot Deep Transfer Learning of Mixed Breed Cattle

Livestock welfare and management could be greatly enhanced by the replacement of branding or ear tagging with less invasive visual biometric identification methods. Biometric identification of cattle from muzzle patterns has previously indicated promising results. Significant barriers exist in the translation of these initial findings into a practical precision livestock monitoring system, which can be deployed at scale for large herds. The objective of this study was to investigate and address key limitations to the autonomous biometric identification of cattle. The contributions of this work are fourfold: (1) provision of a large publicly-available dataset of cattle face images (300 individual cattle) to facilitate further research in this field, (2) development of a two-stage YOLOv3-ResNet50 algorithm that first detects and extracts the cattle muzzle region in images and then applies deep transfer learning for biometric identification, (3) evaluation of model performance across a range of cattle breeds, and (4) utilizing few-shot learning (five images per individual) to greatly reduce both the data collection requirements and duration of model training. Results indicated excellent model performance. Muzzle detection accuracy was 99.13% (1024 × 1024 image resolution) and biometric identification achieved 99.11% testing accuracy. Overall, the two-stage YOLOv3-ResNet50 algorithm proposed has substantial potential to form the foundation of a highly accurate automated cattle biometric identification system, which is applicable in livestock farming systems. The obtained results indicate that utilizing livestock biometric monitoring in an advanced manner for resource management at multiple scales of production is possible for future agriculture decision support systems, including providing useful information to forecast acceptable stocking rates of pastures.

Biometric method of personality authentication based on the eye tracking data

A new method of biometric identification of a computer user is proposed based on the Volterra model and eye tracking data in dynamics (eye tracking technology). The instrumental computational and software tools for constructing a nonparametric nonlinear dynamic model (Volterra model) of the human oculo-motor system have been developed on the basis of data from experimental studies "input-output" using innovative eye tracking technology. The obtained multidimensional transition functions are used to construct a biometric identification system for individuals. Figs.: 10. Tabl.: 1. Refs.: 9 titles.

Electrical Impedance of Upper Limb Enables Robust Wearable Identity Recognition against Variation in Finger Placement and Environmental Factors.

Most biometric authentication technologies commercialized in various fields mainly rely on acquired images of structural information, such as fingerprints, irises, and faces. However, bio-recognition techniques using these existing physical features are always at risk of template forgery threats, such as fake fingerprints. Due to the risk of theft and duplication, studies have recently been attempted using the internal structure and biological characteristics of the human body, including our previous works on the ratiometric biological impedance feature. However, one may still question its accuracy in real-life use due to the artifacts from sensing position variability and electrode–skin interfacing noise. Moreover, since the finger possesses more severe thermoregulatory vasomotion and large variability in the tissue properties than the core of the body, it is necessary to mitigate the harsh changes occurring at the peripheral extremities of the human body. To address these challenges, we propose a biometric authentication method through robust feature extraction from the upper-limb impedance acquired based on a portable wearable device. In this work, we show that the upper limb impedance features obtained from wearable devices are robust against undesirable factors such as finger placement deviations and day-to-day physiological changes, along with ratiometric impedance features. Overall, our upper-limb impedance-based analysis in a dataset of 1627 measurement from 33 subjects lowered the classification error rate from 22.38% to 4.3% (by a factor of 5), and further down to 2.4% (by a factor of 9) when combined with the ratiometric features.

Cross-View Gait Recognition Based on Dual-Stream Network

Gait recognition is a biometric identification method that can be realized under long-distance and no-contact conditions. Its applications in criminal investigations and security inspections are thus broad. Most existing gait recognition methods adopted the gait energy image (GEI) for feature extraction. However, the GEI method ignores the dynamic information of gait, which causes the recognition performance to be greatly affected by viewing angle changes and the subject’s belongings and clothes. To solve these problems, in this paper a cross-view gait recognition method that uses a dual-stream network based on the fusion of dynamic and static features (FDSN) is proposed. First, the static features are extracted from the GEI and the dynamic features are extracted from the image sequence of the human’s lower limbs. Then, the two features are fused, and finally, a nearest neighbor classifier is used for classification. Comparative experiments on the CASIA-B dataset created by the Automation Institute of the Chinese Academy of Sciences showed that the FDSN achieves a higher recognition rate than a convolutional neural network (CNN) and Gaitset under changes in viewing angle or clothing. To meet our requirements, in this study a gait image dataset was collected and produced in a campus setting. The experimental results on this dataset show the effectiveness of the FDSN in terms of eliminating the effects of disruptive changes.

Attack Analysis of Face Recognition Authentication Systems Using Fast Gradient Sign Method

ABSTRACT Biometric authentication methods, representing the ”something you are” scheme, are considered the most secure approach for gaining access to protected resources. Recent attacks using Machine Learning techniques demand a serious systematic reevaluation of biometric authentication. This paper analyzes and presents the Fast Gradient Sign Method (FGSM) attack using face recognition for biometric authentication. Machine Learning techniques have been used to train and test the model, which can classify and identify different people’s faces and which will be used as a target for carrying out the attack. Furthermore, the case study will analyze the implementation of the FGSM and the level of performance reduction that the model will have by applying this method in attacking. The test results were performed with the change of parameters both in terms of training and attacking the model, thus showing the efficiency of applying the FGSM.

Biometric Identification Based on Eye Movement Dynamic Features.

The paper presents studies on biometric identification methods based on the eye movement signal. New signal features were investigated for this purpose. They included its representation in the frequency domain and the largest Lyapunov exponent, which characterizes the dynamics of the eye movement signal seen as a nonlinear time series. These features, along with the velocities and accelerations used in the previously conducted works, were determined for 100-ms eye movement segments. 24 participants took part in the experiment, composed of two sessions. The users’ task was to observe a point appearing on the screen in 29 locations. The eye movement recordings for each point were used to create a feature vector in two variants: one vector for one point and one vector including signal for three consecutive locations. Two approaches for defining the training and test sets were applied. In the first one, 75% of randomly selected vectors were used as the training set, under a condition of equal proportions for each participant in both sets and the disjointness of the training and test sets. Among four classifiers: kNN (k = 5), decision tree, naïve Bayes, and random forest, good classification performance was obtained for decision tree and random forest. The efficiency of the last method reached 100%. The outcomes were much worse in the second scenario when the training and testing sets when defined based on recordings from different sessions; the possible reasons are discussed in the paper.

Development of security systems using DNN and i & x-vector classifiers

The widespread use of biometric systems entails increased interest from cybercriminals aimed at developing attacks to crack them. Thus, the development of biometric identification systems must be carried out taking into account protection against these attacks. The development of new methods and algorithms for identification based on the presentation of randomly generated key features from the biometric base of user standards will help to minimize the disadvantages of the above methods of biometric identification of users. We present an implementation of a security system based on voice identification as an access control key and a verification algorithm developed using MATLAB function blocks that can authenticate a person's identity by his or her voice. Our research has shown an accuracy of 90 % for this user identification system for individual voice characteristics. It has been experimentally proven that traditional MFCCs using DNN and i and x-vector classifiers can achieve good results. The paper considers and analyzes the most well-known approaches from the literature to the problem of user identification by voice: dynamic programming methods, vector quantization, mixtures of Gaussian processes, hidden Markov model. The developed software package for biometric identification of users by voice and the method of forming the user's voice standards implemented in the complex allows reducing the number of errors in identifying users of information systems by voice by an average of 1.5 times. Our proposed system better defines voice recognition in terms of accuracy, security and complexity. The application of the results obtained will improve the security of the identification process in information systems from various attacks.

Masked face recognition with convolutional neural networks and local binary patterns.

Face recognition is one of the most common biometric authentication methods as its feasibility while convenient use. Recently, the COVID-19 pandemic is dramatically spreading throughout the world, which seriously leads to negative impacts on people’s health and economy. Wearing masks in public settings is an effective way to prevent viruses from spreading. However, masked face recognition is a highly challenging task due to the lack of facial feature information. In this paper, we propose a method that takes advantage of the combination of deep learning and Local Binary Pattern (LBP) features to recognize the masked face by utilizing RetinaFace, a joint extra-supervised and self-supervised multi-task learning face detector that can deal with various scales of faces, as a fast yet effective encoder. In addition, we extract local binary pattern features from masked face’s eye, forehead and eyebow areas and combine them with features learnt from RetinaFace into a unified framework for recognizing masked faces. In addition, we collected a dataset named COMASK20 from 300 subjects at our institution. In the experiment, we compared our proposed system with several state of the art face recognition methods on the published Essex dataset and our self-collected dataset COMASK20. With the recognition results of 87% f1-score on the COMASK20 dataset and 98% f1-score on the Essex dataset, these demonstrated that our proposed system outperforms Dlib and InsightFace, which has shown the effectiveness and suitability of the proposed method. The COMASK20 dataset is available on https://github.com/tuminguyen/COMASK20 for research purposes.

A face recognition software framework based on principal component analysis.

Face recognition, as one of the major biometrics identification methods, has been applied in different fields involving economics, military, e-commerce, and security. Its touchless identification process and non-compulsory rule to users are irreplaceable by other approaches, such as iris recognition or fingerprint recognition. Among all face recognition techniques, principal component analysis (PCA), proposed in the earliest stage, still attracts researchers because of its property of reducing data dimensionality without losing important information. Nevertheless, establishing a PCA-based face recognition system is still time-consuming, since there are different problems that need to be considered in practical applications, such as illumination, facial expression, or shooting angle. Furthermore, it still costs a lot of effort for software developers to integrate toolkit implementations in applications. This paper provides a software framework for PCA-based face recognition aimed at assisting software developers to customize their applications efficiently. The framework describes the complete process of PCA-based face recognition, and in each step, multiple variations are offered for different requirements. Some of the variations in the same step can work collaboratively and some steps can be omitted in specific situations; thus, the total number of variations exceeds 150. The implementation of all approaches presented in the framework is provided.

USABLE SECURITY IN BIOMETRIC AUTHENTICATION SYSTEMS

Abstract: We introduce the term usable security to refer to security systems, models, mechanisms and applications that have as the main goal usability. Secure systems cannot exist without secure authentication methods. Thus we outline biometric authentication methods and we focus on iris recognition because is the most reliable and accurate method for human identification]. The most important advantage of iris biometric over other biometrics is that irises have enormous pattern variability meaning that the variation between individual is almost maximum and variation for any person across time or conditions is minimum. Taking into consideration this observations, this survey covers researches in this field, methods of technical implementation and the usability of this method as an authentication system on iOS environment.

Multispectral hand features for secure biometric authentication systems

SummaryWith rapid growth of mobile‐based computing, reliable security and user authentication methods are necessary. This article proposes a proof‐of‐concept biometric authentication method utilizing hand images collected in different light spectra. An analysis of similarity between pattern of blood vessels extracted from near‐infrared images and thermal images and assessment of the correlation between individual biometric features contained in each image type is also performed. Results indicate a large potential of using thermal images in biometrics more extensively than now. Also proposed and evaluated are biometric recognition methods based on images of the hand acquired in visible light, near infrared, and using thermal infrared sensors. Two approaches were used to assess information content in images of each type: one based on texture descriptor and one employing convolutional neural networks. In an evaluation gathering data from 104 subjects, the former yielded the lowest equal error rate (EER) of , whereas the latter approach gave for thermal images. Finally, fusion of different‐spectra modalities increases accuracy and further reduces EER to . This is, to the authors' best knowledge, the first study exploring the concept of fusing different spectral representations of the human hand for the purpose of biometric recognition.

Restoration of Motion Blurred Image by Modified DeblurGAN for Enhancing the Accuracies of Finger-Vein Recognition.

Among many available biometrics identification methods, finger-vein recognition has an advantage that is difficult to counterfeit, as finger veins are located under the skin, and high user convenience as a non-invasive image capturing device is used for recognition. However, blurring can occur when acquiring finger-vein images, and such blur can be mainly categorized into three types. First, skin scattering blur due to light scattering in the skin layer; second, optical blur occurs due to lens focus mismatching; and third, motion blur exists due to finger movements. Blurred images generated in these kinds of blur can significantly reduce finger-vein recognition performance. Therefore, restoration of blurred finger-vein images is necessary. Most of the previous studies have addressed the restoration method of skin scattering blurred images and some of the studies have addressed the restoration method of optically blurred images. However, there has been no research on restoration methods of motion blurred finger-vein images that can occur in actual environments. To address this problem, this study proposes a new method for improving the finger-vein recognition performance by restoring motion blurred finger-vein images using a modified deblur generative adversarial network (modified DeblurGAN). Based on an experiment conducted using two open databases, the Shandong University homologous multi-modal traits (SDUMLA-HMT) finger-vein database and Hong Kong Polytechnic University finger-image database version 1, the proposed method demonstrates outstanding performance that is better than those obtained using state-of-the-art methods.

DESIGN OF BIOMETRIC PROTECTION AUTHENTIFICATION SYSTEM BASED ON K-AVERAGE METHOD

The method of biometric identification, designed to ensure the protection of confidential information, is considered. The method of classification of biometric prints by means of machine learning is offered. One of the variants of the solution of the problem of identification of biometric images on the basis of the k-means algorithm is given. Marked data samples were created for learning and testing processes. Biometric fingerprint data were used to establish identity. A new fingerprint scan that belongs to a particular person is compared to the data stored for that person. If the measurements match, the statement that the person has been identified is true. Experimental results indicate that the k-means method is a promising approach to the classification of fingerprints. The development of biometrics leads to the creation of security systems with a better degree of recognition and with fewer errors than the security system on traditional media. Machine learning was performed using a number of samples from a known biometric database, and verification / testing was performed with samples from the same database that were not included in the training data set. Biometric fingerprint data based on the freely available NIST Special Database 302 were used to establish identity, and the learning outcomes were shown. A new fingerprint scan that belongs to a particular person is compared to the data stored for that person. If the measurements match, the statement that the person has been identified is true. The machine learning system is built on a modular basis, by forming combinations of individual modules scikit-learn library in a python environment.

Exploring biometric identification in FinTech applications based on the modified TAM

In recent years, biometric technologies have been widely embedded in mobile devices; these technologies were originally employed to enhance the security of mobile devices. With the rise of financial technology (FinTech), which uses mobile devices and applications as promotional platforms, biometrics has the important role of strengthening the identification of such applications for security. However, users still have privacy and trust concerns about biometrics. Previous studies have demonstrated that the technology acceptance model (TAM) can rigorously explain and predict user acceptance of new technologies. This study therefore modifies the TAM as a basic research architecture. Based on a literature review, we add two new variables, namely, “perceived privacy” and “perceived trust,” to extend the traditional TAM to examine user acceptance of biometric identification in FinTech applications. First, we apply the analytic hierarchy process (AHP) to evaluate the defined objects and relevant criteria of the research framework. Second, we use the AHP results in the scenario analysis to explore biometric identification methods that correspond to objects and criteria. The results indicate that face and voice recognition are the two most preferred identification methods in FinTech applications. In addition, there are significant changes in the results of the perceived trust and perceived privacy dominant scenarios.

A Survey Study of the Current Challenges and Opportunities of Deploying the ECG Biometric Authentication Method in IoT and 5G Environments

The environment prototype of the Internet of Things (IoT) has opened the horizon for researchers to utilize such environments in deploying useful new techniques and methods in different fields and areas. The deployment process takes place when numerous IoT devices are utilized in the implementation phase for new techniques and methods. With the wide use of IoT devices in our daily lives in many fields, personal identification is becoming increasingly important for our society. This survey aims to demonstrate various aspects related to the implementation of biometric authentication in healthcare monitoring systems based on acquiring vital ECG signals via designated wearable devices that are compatible with 5G technology. The nature of ECG signals and current ongoing research related to ECG authentication are investigated in this survey along with the factors that may affect the signal acquisition process. In addition, the survey addresses the psycho-physiological factors that pose a challenge to the usage of ECG signals as a biometric trait in biometric authentication systems along with other challenges that must be addressed and resolved in any future related research.

Extended evaluation of the effect of real and simulated masks on face recognition performance.

Face recognition is an essential technology in our daily lives as a contactless and convenient method of accurate identity verification. Processes such as secure login to electronic devices or identity verification at automatic border control gates are increasingly dependent on such technologies. The recent COVID‐19 pandemic has increased the focus on hygienic and contactless identity verification methods. The pandemic has led to the wide use of face masks, essential to keep the pandemic under control. The effect of mask‐wearing on face recognition in a collaborative environment is currently a sensitive yet understudied issue. Recent reports have tackled this by using face images with synthetic mask‐like face occlusions without exclusively assessing how representative they are of real face masks. These issues are addressed by presenting a specifically collected database containing three sessions, each with three different capture instructions, to simulate real use cases. The data are augmented to include previously used synthetic mask occlusions. Further studied is the effect of masked face probes on the behaviour of four face recognition systems—three academic and one commercial. This study evaluates both masked‐to‐non‐masked and masked‐to‐masked face comparisons. In addition, real masks in the database are compared with simulated masks to determine their comparative effects on face recognition performance.

Performance Optimization of Surface Electromyography Based Biometric Sensing System for Both Verification and Identification

Recently, surface electromyography (sEMG) emerged as a novel biometric authentication method. Since EMG system parameters, such as the feature extraction methods and the number of channels, have been known to affect system performances, it is important to investigate these effects on the performance of the sEMG-based biometric system to determine optimal system parameters. In this study, three robust feature extraction methods, Time-domain (TD) feature, Frequency Division Technique (FDT), and Autoregressive (AR) feature, and their combinations were investigated while the number of channels varying from one to eight. For these system parameters, the performance of sixteen static wrist and hand gestures was systematically investigated in two authentication modes: verification and identification. The results from 24 participants showed that the TD features significantly ( <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">${p} &lt; 0.05$ </tex-math></inline-formula> ) and consistently outperformed FDT and AR features for all channel numbers. The results also showed that the performance of a four-channel setup was not significantly different from those with higher number of channels. The average equal error rate (EER) for a four-channel sEMG verification system was 4% for TD features, 5.3% for FDT features, and 10% for AR features. For an identification system, the average Rank-1 error (R1E) for a four-channel configuration was 3% for TD features, 12.4% for FDT features, and 36.3% for AR features. The electrode position on the flexor carpi ulnaris (FCU) muscle had a critical contribution to the authentication performance. Thus, the combination of the TD feature set and a four-channel sEMG system with one of the electrodes positioned on the FCU are recommended for optimal authentication performance.

The use of biometric technologies for bank transaction security management against the background of the international experience: Evidence from Ukraine

In view of the expanding range of banking services in Ukraine, the issue of introducing innovative means of protecting consumers against illegal actions in the field of banking becomes relevant. This paper aims to determine the effectiveness of biometric technologies for customer identification during banking transactions, the legality of their use, and to identify areas for the development of state policy focused on the legal use of biometric data in order to protect the rights and legitimate interests of individuals and legal entities. Based on analysis and systematization of scientific publications and regulatory framework, it was found that a potential direction for banks to implement the customer focus concept in their services to establish the appropriate level of security is the use of biometric technologies that ensure the proper storage of personal data. The summarized information on the actual application of biometric identification methods in the banking sector allows stating that the factors stipulating the criminal offenses using biometric data can be neutralized by the subjects of counteracting such offenses and through effective legal remedies. Contradictions arising between the state of regulatory support and the actual needs for the use of biometric technologies in the field of banking in Ukraine decelerate the use of effective security tools with a high degree of reliability in the banking sector. It is concluded that further implementation of biometrics in the banking sector in Ukraine requires a comprehensive approach and consideration of the best world practices.

Biometric technologies for security of banking operations in Ukraine and foreign countrie

The issue of introduction of innovative means of consumer protection against illegal actions in the field of banking is becomingrelevant in connection with the expansion of the range of banking services in Ukraine. The article summarizes the status and prospects of using biometric identification methods in the banking sector in Ukraine and abroad. Analysis and systematization of scientific publicationsand legal framework revealed that a potential direction of the concept of customer orientation of banks is the use of biometrictechnologies in the provision of services that ensure high-quality preservation of personal data of customers. It is stated that in Ukrainethere is a need to strengthen both technological and legal mechanisms for the protection of biometric data for the needs of the bankingsector. One of the factors that significantly complicates the implementation of biometrics in banks is the lack of technical capabilities.However, there is a gradual dynamics contained in the testing of various methods of biometric identification in banking institutions.Contradictions that arise between the actual needs of the use of biometric technologies in the field of banking by the state of regu -latory and legal support in Ukraine slow down the use of effective security tools with a high degree of reliability in the banking sector.Appropriate regulatory regulation of the use of biometric technologies for identification purposes will promote the development of thesetechnologies by strengthening the confidence of consumers of banking services, as well as competition of biometric algorithms in thepresence of unified standards and requirements. Factors that shape the conditions for committing criminal offenses using biometric datacan be neutralized by effective legal means, as well as by the relevant actors in combating these offenses. It is concluded that the introductionof biometrics for the banking sector in the future in Ukraine requires taking into account the leading international experienceon these issues and an integrated approach.