Biomechanical Stimuli Research Articles

Fascial Manual Medicine: A Continuous Evolution.

From the perspective of fascial manual medicine (FMM), the body should not be considered as a set of compartments, but as a functional continuum, where most of the tissues (considering embryology) are fascia. The cells that make up the fascia can use multiple strategies to communicate, with neighboring cells, with the tissue to which they belong, and with the entire body, thanks to biochemical (microscopy) and electromagnetic (nanoscopy) possibilities. These multiple capacities to send and receive information make the border or layer of the different tissues seem absent. All the manual techniques that profess to be the only ones that work on the patient's symptoms, dictating a standardized manual procedure that all patients should undergo, represent a clinical deviation. Likewise, thinking that the manual approach can provide biomechanical stimuli only to a single specific structure or layer is a conceptual error. This narrative review briefly reviews the history of fascial-related nomenclature and how the fascial system is currently considered, posing new reflections on how the fascial continuum could be conceived by practitioners who apply FMM in the clinic, such as osteopaths, chiropractors, and physiotherapists.

Heavy mechanical force decelerates orthodontic tooth movement via Piezo1-induced mitochondrial calcium down-regulation

Orthodontic tooth movement (OTM) depends on periodontal ligament cells (PDLCs), which sense biomechanical stimuli and initiate alveolar bone remodeling. Light (optimal) forces accelerate OTM, whereas heavy forces decelerate it. However, the mechanisms by which PDLCs sense biomechanical stimuli and affect osteoclastic activities under different mechanical forces (MFs) remain unclear. This study demonstrates that mechanosensitive ion channel Piezo1-mediated Ca2+ signal conversion is crucial for sensing and delivering biomechanical signals in PDLCs under heavy-force conditions. Heavy MF up-regulated Piezo1 in PDLCs, reducing mitochondrial Ca2+ influx by inhibiting ITPR3 expression in mitochondria-associated membranes. Decreased mitochondrial calcium uptake led to reduced cytoplasmic release of mitochondrial DNA and inhibited the activation of the cGAS‒STING signaling cascade, subsequently inhibiting monocyte-to-osteoclast differentiation. Inhibition of Piezo1 or up-regulation of STING expression under heavy MF conditions significantly increased osteoclast activity and accelerated OTM. These findings suggest that heavy MF-induced Piezo1 expression in PDLCs is closely related to the control of osteoclast activity during OTM and plays an essential role in alveolar bone remodeling. This mechanism may be a potential therapeutic target for accelerating OTM.

Resting human trabecular meshwork cells experience tonic cation influx.

The trabecular meshwork (TM) regulates intraocular pressure (IOP) by converting biochemical and biomechanical stimuli into intracellular signals. Recent electrophysiological studies demonstrated that this process is mediated by pressure sensing ion channels in the TM plasma membrane while the molecular and functional properties of channels that underpin ionic homeostasis in resting cells remain largely unknown. Here, we demonstrate that the TM resting potential is subserved by a powerful cationic conductance that disappears following Na+ removal and substitution with choline or NMDG+. Its insensitivity to TTX, verapamil, phenamil methanesulfonate and amiloride indicates it does not involve voltage-operated Na+, Ca2+ and epithelial Na+ (ENaC) channels or Na+/H+ exchange while a modest hyperpolarization induced by SEA-0440 indicates residual contribution from reversed Na+/Ca2+ exchange. Tonic cationic influx was inhibited by Gd3+ and Ruthenium Red but not GsMTx4, indicating involvement of TRP-like but not Piezo channels. Transcriptional analysis detected expression of most TRP genes, with the canonical transcriptome pool dominated by TRPC1 followed by the expression ofTRPV1, TRPC3 and TRPC5. TRPC3 antagonist Pyr3 and TRPC1,4,5 antagonist Pico1,4,5 did not affect the standing current, whereas the TRPC blocker SKF96365 promoted rather than suppressed, Na+ influx. TM cells thus maintain the resting membrane potential, control Na+ homeostasis, and balance K+ efflux through a novel constitutive monovalent cation leak current with properties not unlike those of TRP channels. Yet to be identified at the molecular level, this novel channel sets the homeostatic steady-state and controls the magnitude of pressure-induced transmembrane signals.

Deciphering the dynamics: Exploring the impact of mechanical forces on histone acetylation.

Living cells navigate a complex landscape of mechanical cues that influence their behavior and fate, originating from both internal and external sources. At the molecular level, the translation of these physical stimuli into cellular responses relies on the intricate coordination of mechanosensors and transducers, ultimately impacting chromatin compaction and gene expression. Notably, epigenetic modifications on histone tails govern the accessibility of gene-regulatory sites, thereby regulating gene expression. Among these modifications, histone acetylation emerges as particularly responsive to the mechanical microenvironment, exerting significant control over cellular activities. However, the precise role of histone acetylation in mechanosensing and transduction remains elusive due to the complexity of the acetylation network. To address this gap, our aim is to systematically explore the key regulators of histone acetylation and their multifaceted roles in response to biomechanical stimuli. In this review, we initially introduce the ubiquitous force experienced by cells and then explore the dynamic alterations in histone acetylation and its associated co-factors, including HDACs, HATs, and acetyl-CoA, in response to these biomechanical cues. Furthermore, we delve into the intricate interactions between histone acetylation and mechanosensors/mechanotransducers, offering a comprehensive analysis. Ultimately, this review aims to provide a holistic understanding of the nuanced interplay between histone acetylation and mechanical forces within an academic framework.

Biophysical stimuli for promoting bone repair and regeneration

Abstract Bone injuries and diseases are associated with profound changes in the biophysical properties of living bone tissues, particularly their electrical and mechanical properties. The biophysical properties of healthy bone are attributed to the complex network of interactions between its various cell types (i.e., osteocytes, osteoclast, immune cells and vascular endothelial cells) with the surrounding extracellular matrix (ECM) against the backdrop of a myriad of biomechanical and bioelectrical stimuli arising from daily physical activities. Understanding the pathophysiological changes in bone biophysical properties is critical to developing new therapeutic strategies and novel scaffold biomaterials for orthopedic surgery and tissue engineering, as well as provides a basis for the application of various biophysical stimuli as therapeutic agents to restore the physiological microenvironment of injured/diseased bone tissue, to facilitate its repair and regeneration. These include mechanical, electrical, magnetic, thermal and ultrasound stimuli, which will be critically examined in this review. A significant advantage of utilizing such biophysical stimuli to facilitate bone healing is that these may be applied non-invasively with minimal damage to surrounding tissues, unlike conventional orthopedic surgical procedures. Furthermore, the effects of such biophysical stimuli can be localized specifically at the bone defect site, unlike drugs or growth factors that tend to diffuse away after delivery, which may result in detrimental side effects at ectopic sites.

Enhancing Osteoblast Differentiation from Adipose-Derived Stem Cells Using Hydrogels and Photobiomodulation: Overcoming In Vitro Limitations for Osteoporosis Treatment.

Osteoporosis represents a widespread and debilitating chronic bone condition that is increasingly prevalent globally. Its hallmark features include reduced bone density and heightened fragility, which significantly elevate the risk of fractures due to the decreased presence of mature osteoblasts. The limitations of current pharmaceutical therapies, often accompanied by severe side effects, have spurred researchers to seek alternative strategies. Adipose-derived stem cells (ADSCs) hold considerable promise for tissue repair, albeit they encounter obstacles such as replicative senescence in laboratory conditions. In comparison, employing ADSCs within three-dimensional (3D) environments provides an innovative solution, replicating the natural extracellular matrix environment while offering a controlled and cost-effective in vitro platform. Moreover, the utilization of photobiomodulation (PBM) has emerged as a method to enhance ADSC differentiation and proliferation potential by instigating cellular stimulation and facilitating beneficial performance modifications. This literature review critically examines the shortcomings of current osteoporosis treatments and investigates the potential synergies between 3D cell culture and PBM in augmenting ADSC differentiation towards osteogenic lineages. The primary objective of this study is to assess the efficacy of combined 3D environments and PBM in enhancing ADSC performance for osteoporosis management. This research is notably distinguished by its thorough scrutiny of the existing literature, synthesis of recent advancements, identification of future research trajectories, and utilization of databases such as PubMed, Scopus, Web of Science, and Google Scholar for this literature review. Furthermore, the exploration of biomechanical and biophysical stimuli holds promise for refining treatment strategies. The future outlook suggests that integrating PBM with ADSCs housed within 3D environments holds considerable potential for advancing bone regeneration efforts. Importantly, this review aspires to catalyse further advancements in combined therapeutic strategies for osteoporosis regeneration.

A Soft-Tissue Driven Bone Remodeling Algorithm for Mandibular Residual Ridge Resorption Based on Patient CT Image Data.

The role of the biomechanical stimulation generated from soft tissue has not been well quantified or separated from the self-regulated hard tissue remodeling governed by Wolff's Law. Prosthodontic overdentures, commonly used to restore masticatory functions, can cause localized ischemia and inflammation as they often compress patients' oral mucosa and impede local circulation. This biomechanical stimulus in mucosa is found to accelerate the self-regulated residual ridge resorption (RRR), posing ongoing clinical challenges. Based on the dedicated long-term clinical datasets, this work develops an in-silico framework with a combination of techniques, including advanced image post-processing, patient-specific finite element models and unsupervised machine learning Self-Organizing map algorithm, to identify the soft tissue induced RRR and quantitatively elucidate the governing relationship between the RRR and hydrostatic pressure in mucosa. The proposed governing equation has not only enabled a predictive simulation for RRR as showcased in this study, providing a biomechanical basis for optimizing prosthodontic treatments, but also extended the understanding of the mechanobiological responses in the soft-hard tissue interfaces and the role in bone remodeling.

Soft robotic platform for progressive and reversible aortic constriction in a small-animal model.

Our understanding of cardiac remodeling processes due to left ventricular pressure overload derives largely from animal models of aortic banding. However, these studies fail to enable control over both disease progression and reversal, hindering their clinical relevance. Here, we describe a method for progressive and reversible aortic banding based on an implantable expandable actuator that can be finely tuned to modulate aortic banding and debanding in a rat model. Through catheterization, imaging, and histologic studies, we demonstrate that our platform can recapitulate the hemodynamic and structural changes associated with pressure overload in a controllable manner. We leveraged soft robotics to enable noninvasive aortic debanding, demonstrating that these changes can be partly reversed because of cessation of the biomechanical stimulus. By recapitulating longitudinal disease progression and reversibility, this animal model could elucidate fundamental mechanisms of cardiac remodeling and optimize timing of intervention for pressure overload.

A bone remodeling approach encoding the effect of damage and a diffusive bio-mechanical stimulus

The paper focuses on the effect of damage on the bone remodeling process. This is a crucial, although complex, aspect. A one-dimensional continuous deformable body is employed to model living bone tissue. The model incorporates the bone functional adaptation through an evolution law for an effective elastic modulus driven by mechanical feedback via a mechano-transduction diffusive signal. This type of information transduction, i.e., diffusion, is essential for the model to take into account remodeling in the case of minor injury or pathology-affected regions where there is no signal production. In addition, the model is able to also take into account potential tissue damage that may evolve over time according to a suitable evolution law. To illustrate the capability of the model to describe the mentioned complex coupled phenomena, numerical tests have been performed encompassing high external loads causing the onset of damage and cyclic loading for healing. The numerical simulations carried out via finite-element analyses yield insights into the mechanisms of bone remodeling, with the final goal of aiding clinical decisions and implant designs for bone health and repair. Overall, a key aspect of the paper is to highlight the feasibility of modeling the evolution in bone elasticity arising from the combined effect of damage and remodeling.

Abstract 104: Endothelial Restoration Of CAD GWAS Gene PLPP3 By Nanomedicine Suppresses Mechano-sensitive YAP/TAZ Activity And Reduces Atherosclerosis In Vivo

Genome-wide association studies (GWAS) have suggested new molecular mechanisms driving vascular complications such as coronary artery disease (CAD). Nevertheless, a major challenge to developing new therapeutic approaches is to spatiotemporally manipulate these GWAS-identified genes in specific vascular tissues of interest in vivo . Atherosclerosis largely occurs in arterial sites where local disturbed flow (DF) activates vascular endothelial cells. The Yorkie homologues YAP (Yes-associated protein) and TAZ (transcriptional coactivator with PDZ-binding motif) have merged as critical transcriptional regulators responding to biomechanical stimuli. The molecular mechanisms by which DF activates while unidirectional flow (UF) inactivates YAP/TAZ remain incompletely understood. Our recent studies demonstrated that DF and genetic predisposition at the CAD locus 1p32.2 cooperatively suppress endothelial phospholipid phosphatase 3 (PLPP3) transcription by inactivating a mechano-sensitive endothelial enhancer; reduced PLPP3 and consequent activation of lipid lysophosphatidic acid (LPA)-receptor signaling, drive endothelial dysfunction. Here we devised a nanomedicine strategy employing VCAM-1-targeting liposome to preferentially deliver chemically-modified PLPP3 mRNA to inflamed endothelial cells in vivo , effectively suppressing endothelial YAP/TAZ activity and reducing DF-induced atherosclerosis in mice. We discovered a molecular paradigm by which PLPP3 inactivates YAP/TAZ by reducing LPA-induced myosin II and ROCK1. These results highlight a new mechanistic link between GWAS and YAP/TAZ mechano-regulation and moreover, establish the proof of concept of vascular wall-based therapies employing targeted mRNA-based nanomedicine.

Influence of Breath-Mimicking Ventilated Incubation on Three-Dimensional Bioprinted Respiratory Tissue Scaffolds.

Development of respiratory tissue constructs is challenging due to the complex structure of native respiratory tissue and the unique biomechanical conditions induced by breathing. While studies have shown that the inclusion of biomechanical stimulus mimicking physiological conditions greatly benefits the development of engineered tissues, to our knowledge no studies investigating the influence of biomechanical stimulus on the development of respiratory tissue models produced through three-dimensional (3D) bioprinting have been reported. This paper presents a study on the utilization of a novel breath-mimicking ventilated incubator to impart biomechanical stimulus during the culture of 3D respiratory bioprinted constructs. Constructs were bioprinted using an alginate/collagen hydrogel containing human primary pulmonary fibroblasts with further seeding of human primary bronchial epithelial cells. Biomechanical stimulus was then applied via a novel ventilated incubator capable of mimicking the pressure and airflow conditions of multiple breathing conditions: standard incubation, shallow breathing, normal breathing, and heavy breathing, over a two-week time period. At time points between 1 and 14 days, constructs were characterized in terms of mechanical properties, cell proliferation, and morphology. The results illustrated that incubation conditions mimicking normal and heavy breathing led to greater and more continuous cell proliferation and further indicated a more physiologically relevant respiratory tissue model.

Role of biophysics and mechanobiology in podocyte physiology.

Podocytes form the backbone of the glomerular filtration barrier and are exposed to various mechanical forces throughout the lifetime of an individual. The highly dynamic biomechanical environment of the glomerular capillaries greatly influences the cell biology of podocytes and their pathophysiology. Throughout the past two decades, a holistic picture of podocyte cell biology has emerged, highlighting mechanobiological signalling pathways, cytoskeletal dynamics and cellular adhesion as key determinants of biomechanical resilience in podocytes. This biomechanical resilience is essential for the physiological function of podocytes, including the formation and maintenance of the glomerular filtration barrier. Podocytes integrate diverse biomechanical stimuli from their environment and adapt their biophysical properties accordingly. However, perturbations in biomechanical cues or the underlying podocyte mechanobiology can lead to glomerular dysfunction with severe clinical consequences, including proteinuria and glomerulosclerosis. As our mechanistic understanding of podocyte mechanobiology and its role in the pathogenesis of glomerular disease increases, new targets for podocyte-specific therapeutics will emerge. Treating glomerular diseases by targeting podocyte mechanobiology might improve therapeutic precision and efficacy, with potential to reduce the burden of chronic kidney disease on individuals and health-care systems alike.

Unraveling the transcriptome profile of pulsed electromagnetic field stimulation in bone regeneration using a bioreactor-based investigation platform

IntroductionHuman mesenchymal stem cells (hMSCs) sense and respond to biomechanical and biophysical stimuli, yet the involved signaling pathways are not fully identified. The clinical application of biophysical stimulation including pulsed electromagnetic field (PEMF) has gained momentum in musculoskeletal disorders and bone tissue engineering. MethodologyWe herein aim to explore the role of PEMF stimulation in bone regeneration by developing trabecular bone-like tissues, and then, culturing them under bone-like mechanical stimulation in an automated perfusion bioreactor combined with a custom-made PEMF stimulator. After selecting the optimal cell seeding and culture conditions for inspecting the effects of PEMF on hMSCs, transcriptomic studies were performed on cells cultured under direct perfusion with and without PEMF stimulation. ResultsWe were able to identify a set of signaling pathways and upstream regulators associated with PEMF stimulation and to distinguish those linked to bone regeneration. Our findings suggest that PEMF induces the immune potential of hMSCs by activating and inhibiting various immune-related pathways, such as macrophage classical activation and MSP-RON signaling in macrophages, respectively, while promoting angiogenesis and osteogenesis, which mimics the dynamic interplay of biological processes during bone healing. ConclusionsOverall, the adopted bioreactor-based investigation platform can be used to investigate the impact of PEMF stimulation on bone regeneration.

Biomechanical Remodeling of Aortic Valve Interstitial Cells During Calcified Lesion Formation In Vitro.

Healthy aortic heart valves are essential to the regulation of unidirectional blood flow. Calcific aortic valve disease (CAVD) is an actively progressive disease that involves the disorganization of valve cells and accumulation of calcium deposits on the aortic valve leaflets. CAVD involves disruption of cell environment homeostasis that prior cell culture models have found difficult to portray and model. As it is still poorly understood how tissue stiffening associates with lesion formation, here, we implement a novel 3D culture platform to characterize the relationship between mechanical stress and tissue remodeling and analyze how the application of pro-osteogenic stimulation dysregulates the native ability of valve cells to organize its matrix. Through a temporal study of macroscopic remodeling, we determine that aortic valve interstitial neo-tissues undergo varying stiffness and mechanical stress, demonstrate greater myofibroblastic gene expression, and show greater remodeling activity in the outer surface of the neo-tissue in a banding pattern when cultured in osteogenic growth medium. In human aortic valve interstitial cells cultured in osteogenic growth medium, we observed an increase in stress but significant decreases in myofibroblastic gene expression with the addition of growth factors. In summary, we are able to see the interplay of biochemical and biomechanical stimuli in valvular remodeling by using our platform to model dynamic stiffening of valve interstitial neo-tissues under different biochemical conditions.

Mechanobiology of Hyaluronan: Connecting Biomechanics and Bioactivity in Musculoskeletal Tissues.

Hyaluronan (HA) plays well-recognized mechanical and biological roles in articular cartilage and synovial fluid, where it contributes to tissue structure and lubrication. An understanding of how HA contributes to the structure of other musculoskeletal tissues, including muscle, bone, tendon, and intervertebral discs, is growing. In addition, the use of HA-based therapies to restore damaged tissue is becoming more prevalent. Nevertheless, the relationship between biomechanical stimuli and HA synthesis, degradation, and signaling in musculoskeletal tissues remains understudied, limiting the utility of HA in regenerative medicine. In this review, we discuss the various roles and significance of endogenous HA in musculoskeletal tissues. We use what is known and unknown to motivate new lines of inquiry into HA biology within musculoskeletal tissues and in the mechanobiology governing HA metabolism by suggesting questions that remain regarding the relationship and interaction between biological and mechanical roles of HA in musculoskeletal health and disease.

MICROENVIRONMENTAL DEPENDENCE OF PROPER CHONDROCYTIC MATURATION

Articular cartilage is a relatively hypoxic tissue with a unique extracellular matrix that is enriched with cations, resulting in an elevated interstitial fluid osmolarity. Several biomechanical and physicochemical stimuli are reported to influence chondrocyte metabolism. For regenerative in vitro applications, increasing the extracellular osmolarity above plasma level to more physiological valuesinduces chondrogenic marker expression and the differentiation of chondroprogenitor cells. Calcineurin inhibitor FK506 modulates the differentiation of primary chondrocytes under such conditions and its effect on cell proliferation, extracellular matrix quality, and BMP- and TGF-β signaling will be described. Supraphysiological osmolarity compromises chondrocyte proliferation, while physosmolarity or FK506 did not. Rather, the combination of the latter increased proteoglycan and collagen expression in chondrocytesin vitro and in situ, affecting expression of TGF-β-inducible protein TGFBI and chondrogenic (SOX9, Col2) as well as terminal differentiation markers (e.g., Col10). Surprisingly, expression of particularly minor collagens (e.g., Col9, Col11) was improved. Physiological osmolarity seems to promote terminal chondrogenic differentiation of progenitor cells through sensitization of TGF-β superfamily signaling at the type I receptor. While hyperosmolarity alone facilitates TGF-β superfamily signaling, FK506 seems to enhance signaling by releasing the FKBP12 break from the type I receptor to improve collagenous marker expression. Our data help explaining seemingly contradictory earlier findings and potentially benefit future cell-based cartilage repair strategies.

Highly stretchable nanocomposite piezofibers: a step forward into practical applications in biomedical devices.

High-performance biocompatible composite materials are gaining attention for their potential in various fields such as neural tissue scaffolds, bio-implantable devices, energy harvesting, and biomechanical sensors. However, these devices currently face limitations in miniaturization, finite battery lifetimes, fabrication complexity, and rigidity. Hence, there is an urgent need for smart and self-powering soft devices that are easily deployable under physiological conditions. Herein, we present a straightforward and efficient fabrication technique for creating flexible/stretchable fiber-based piezoelectric structures using a hybrid nanocomposite of polyvinylidene fluoride (PVDF), reduced graphene oxide (rGO), and barium-titanium oxide (BT). These nanocomposite fibers are capable of converting biomechanical stimuli into electrical signals across various structural designs (knit, braid, woven, and coil). It was found that a stretchable configuration with higher output voltage (4 V) and a power density (87 μW cm-3) was obtained using nanocomposite coiled fibers or knitted fibers, which are ideal candidates for real-time monitoring of physiological signals. These structures are being proposed for practical transition to the development of the next generation of fiber-based biomedical devices. The cytotoxicity and cytocompatibility of nanocomposite fibers were tested on human mesenchymal stromal cells. The obtained results suggest that the developed fibers can be utilized for smart scaffolds and bio-implantable devices.

Biomechanical stimulation promotes blood vessel growth despite VEGFR-2 inhibition

BackgroundAngiogenesis, or the growth of new vasculature from existing blood vessels, is widely considered a primary hallmark of cancer progression. When a tumor is small, diffusion is sufficient to receive essential nutrients; however, as the tumor grows, a vascular supply is needed to deliver oxygen and nutrients into the increasing mass. Several anti-angiogenic cancer therapies target VEGF and the receptor VEGFR-2, which are major promoters of blood vessel development. Unfortunately, many of these cancer treatments fail to completely stop angiogenesis in the tumor microenvironment (TME). Since these therapies focus on the biochemical activation of VEGFR-2 via VEGF ligand binding, we propose that mechanical cues, particularly those found in the TME, may be a source of VEGFR-2 activation that promotes growth of blood vessel networks even in the presence of VEGF and VEGFR-2 inhibitors.ResultsIn this paper, we analyzed phosphorylation patterns of VEGFR-2, particularly at Y1054/Y1059 and Y1214, stimulated via either VEGF or biomechanical stimulation in the form of tensile strains. Our results show prolonged and enhanced activation at both Y1054/Y1059 and Y1214 residues when endothelial cells were stimulated with strain, VEGF, or a combination of both. We also analyzed Src expression, which is downstream of VEGFR-2 and can be activated through strain or the presence of VEGF. Finally, we used fibrin gels and microfluidic devices as 3D microtissue models to simulate the TME. We determined that regions of mechanical strain promoted increased vessel growth, even with VEGFR-2 inhibition through SU5416.ConclusionsOverall, understanding both the effects that biomechanical and biochemical stimuli have on VEGFR-2 activation and angiogenesis is an important factor in developing effective anti-angiogenic therapies. This paper shows that VEGFR-2 can be mechanically activated through strain, which likely contributes to increased angiogenesis in the TME. These proof-of-concept studies show that small molecular inhibitors of VEGFR-2 do not fully prevent angiogenesis in 3D TME models when mechanical strains are introduced.

Biomechanical Aspects in Bone Tumor Engineering.

In the past decades, anticancer drug development brought the field of tumor engineering to a new level by the need of robust test systems. Simulating tumor microenvironment in vitro remains a challenge, and osteosarcoma-the most common primary bone cancer-is no exception. The growing evidence points to the inevitable connection between biomechanical stimuli and tumor chemosensitivity and aggressiveness, thus making this component of the microenvironment a mandatory requirement to the developed models. In this review, we addressed the question: is the "in vivo - in vitro" gap in osteosarcoma engineering bridged from the perspective of biomechanical stimuli? The most notable biomechanical cues in the tumor cell microenvironment are observed and compared in the contexts of in vivo conditions and engineered three-dimensional in vitro models. Impact statement The importance of biomechanical stimuli in three-dimensional in vitro models for drug testing is becoming more pronounced nowadays. This review might assist in understanding the key players of the biophysical environment of primary bone cancer and the current state of bone tumor engineering from this perspective.

The Rise of Nanogenerators

The present article discusses the recent advancements in the field of self-powered systems that harness mechanical energy from vibrations in the environment to generate electrical power. It introduces the con-cept of nanogenerators, which can convert mechanical energy into electrical energy through piezoelectric or triboelectric effects. These nanogenerators are lightweight, flexible, and have a high energy den-sity, making them suitable for integration into portable electronic de-vices and wearables. The article also highlights their potential applica-tion as biomedical sensors for monitoring human health by capturing bio-mechanical stimuli such as heartbeat and pulse. The choice of ma-terials and device engineering are crucial in developing flexible and wearable nanogenerators, with various materials like semiconductors, transition metal dichalcogenides, and perovskites being explored for their piezoelectric and triboelectric properties. There is a need for fur-ther research to bring these technologies into everyday life, focusing on material selection, device engineering, and signal transmission tech-nology to advance energy harvesting and health monitoring systems.