Biomechanical Characteristics Research Articles

Polyphenol-treatment without preceding glutaraldehyde fixation: a potential paradigm change for bioprosthetic heart valves

Abstract Background Glutaraldehyde (GA) is the common fixative agent for bioprosthetic heart valves (BHVs). However, its chemical instability can expose calcium binding sites and, at commercially used concentrations, GA does not ensure effective immunological tolerance, triggering an immune response correlated to degeneration. Recently, polyphenols (PPs) achieved an almost complete xenoantigens inactivation in GA-fixed BHVs ensuring chemical stability of the treated tissue while improving mechanical characteristics and adding anti-infective and anti-thrombotic properties [1-4]. Purpose A new PP-based treatment has been introduced as a potential GA substitute in BHV manufacturing. The unique chemical properties of PPs permit them to interact with the tissue through stable chemical bonds without depolymerization over time, achieving several improvements that promise to extend the long-term durability of BHVs (Fig.1). Methods The study compared the effects of two cross-linking methods on bovine pericardial tissue: (1) traditional fixation in GA, and (2) treatment with PPs without GA. The type of chemical interaction between PPs and tissue was evaluated through nuclear magnetic resonance. The xenoantigens inactivation was quantified in-vitro by ELISA test and in-vivo in a humanized mouse animal model. Biomechanical properties were assessed through uniaxial stress-strain tests and cross-link density through the shrinkage temperature test. The protective effect against bacterial adhesion was evaluated against a strain of S aureus, while the inhibition of thrombosis was evaluated in-vivo in a pig animal model and in-vitro in a blood-loop using bovine blood with radio-labeled platelets. Results PPs effectuated multiple chemical bonds with and within the pericardium including cross-links based on covalent and hydrogen bonds, stacking, and electrostatic interactions. The inactivation of over 90% of surface-xenoantigens of the treated tissue allowed for superior biocompatibility (compared to <50% by commercial GA concentrations). The increase in elongation exhibited by PP-treated tissue confirmed excellent biomechanical features (Fig.2) while a sufficient degree of cross-linking was demonstrated through an adequate shrinkage temperature. Furthermore, a significant degree of bacterial adhesion (86% inhibition evaluated with S. aureus) and thrombus formation (Fig.2, up to 90% inhibition) were observed. Conclusion There is a real clinical need for improved chemical stability, calcification resistance, and immunological tolerance of current BHVs (surgical and transcatheter). PP technology may substitute the use of GA extending their performance and durability, thereby opening trans-catheter heart valves to younger patients. Reducing the need for mechanical heart valves would also address the associated risks of lifelong anticoagulation therapy.Figure 1Figure 2

Personalized Stem Length Optimization in Hip Replacement: A Microscopic Perspective on Bone—Implant Interaction

Total hip replacement (THR) surgery involves the removal of necrotic tissue and the replacement of the natural joint with an artificial hip joint. The demand for THR is increasing due to population aging and prolonged life expectancies. However, the uniform length and shape of artificial hip joints can cause stress shielding, leading to implant loosening and femoral fractures. These issues arise because these designs fail to account for the unique anatomical and biomechanical characteristics of individual patients. Therefore, this study proposes and validates a method to optimize stem length by considering bone microstructure and daily load. The results demonstrated that the optimal stem length varies with loading conditions and significantly reduces stress in the cortical bone while maintaining an appropriate strain energy in the cancellous bone, thereby preventing bone loss. These findings underscore the importance of patient-specific stem design for improving implant stability and clinical outcomes.

Atomic Force Microscopy and Scanning Ion-Conductance Microscopy for Investigation of Biomechanical Characteristics of Neutrophils

Scanning probe microscopy (SPM) is a versatile tool for studying a wide range of materials. It is well suited for investigating living matter, for example, in single-cell neutrophil studies. SPM has been extensively utilized to analyze cell physical properties, providing detailed insights into their structural and functional characteristics at the nanoscale. Its long-standing application in this field highlights its essential role in cell biology and immunology research, significantly contributing to understanding cellular mechanics and interactions. In this review, we discuss the application of SPM techniques, specifically atomic force microscopy (AFM) and scanning ion-conductance microscopy (SICM), to study the fundamental functions of neutrophils. In addition, recent advances in the application of SPM in single-cell immunology are discussed. The application of these techniques allows for obtaining data on the morphology, topography, and mechanical and electrochemical properties of neutrophils with high accuracy.

Mechanobiology studies of bladder tumor cells using laterally squeezing microfluidic flow cytometry

The deformability and uptake capability of cells are critical indicators of their biomechanical properties and functional behaviors, particularly in tumor heterogeneity and cancer research. Here, we introduce a microfluidic flow cytometry platform integrated with a laterally adjustable squeezing structure for the characterization of bladder tumor cells (including 5637 and EJ cell lines) and uroepithelial cells (SV-HUC-1 cell line). The deformability of these cell types under varying channel width conditions was clearly assessed using this platform. The results demonstrated that tumor cells exhibited higher deformability compared to uroepithelial cells, with the EJ cell line exhibiting the greatest difference. Furthermore, the relationship between the malignancy, deformability, and uptake capability of bladder cells was explored through co-cultivation experiments with 2 μm particles. As the malignancy increased, the cells became more deformable and exhibited stronger phagocytic capability with particles. Subsequently, the heterogeneity of tumor cells was investigated by analyzing the deformability of phagocytic and non-phagocytic subpopulations within EJ cells. The developed microfluidic platform offers a promising high-throughput method to assess the biomechanical and phagocytic characteristics of cells, providing valuable insights into tumor cell biology, and potentially improving clinical status of urinary cytology examinations for bladder cancer.

Palmar Displacement in Distal Radius Fractures following Extension Injuries of the Wrist

Fractures of the distal radius have been traditionally classified based on the suspected mechanism of injury. Among clinicians, the terms "Colles" and "Smith" fractures are commonly used to refer to a distal radius fracture that is either displaced to the dorsal (Colles) or palmar (Smith) side of the radius. When analysing x-rays, it is not uncommon for a Smith fracture to be detected in cases where patients describe a fall on the wrist in an extended position. Thus, the question arises how a flexion-type fracture can occur after an extension injury. So far, only little research has been conducted into this subject. The aim of this study was to analyse the mechanisms of injury that lead to various types of distal radius fractures. Particular emphasis was placed on "Smith" fractures and on the biomechanical, physiological and anatomical characteristics that contribute to their occurrence. To assess these relationships, data of fractures were collected following a life-like fracture simulation using a "drop-bench" in non-formalin fixated human specimens. These fractures were produced between January 2016 and December 2021. Biographic data of all specimens used were available. Additionally, all biomechanical and physical characteristics of the fracture simulation were fully documented. Of the 122 specimens with a full data set, 17 (13.9%) fractures were determined to be Smith fractures based on their radiological appearance. In 10 of these flexion fractures, the wrist was set in dorsal extension. The mean angle of extension was 86.3 degrees for flexion fractures compared to 90.5 degrees for extension fractures. Six out of 10 Smith-type fractures that were set in dorsal extension were also exposed to pronation, whereas only one was exposed to supination. The mean potential energy for fracture creation was 168.0 joules for Smith fractures in dorsal extension, whereas all other fractures showed a mean of 185.2 joules. It can be concluded that a Smith fracture is not limited to being the result of a fall on the wrist in a flexed position. The same fracture may also be the result of a fall with the wrist in an extended position if certain physical factors are applicable.

Kinematic characterization of backhand stroke accuracy in squash based on kinematic variables between two different skill levels-a preliminary cross-sectional study.

The aim of this study was to compare differences in shot placement and accuracy between national and international level squash players. Squash is a technically demanding sport and understanding the biomechanical characteristics of athletes at different levels is important for developing effective training strategies. The study used a three-dimensional motion analysis system, a high-speed video camera, and a professional tee for biomechanical testing. Participants included national and international level squash players. The kinematic characteristics of the shoulder, elbow, and wrist joints of the upper extremity for backhand strokes, as well as the accuracy of the strokes, were analyzed to compare the differences between the two groups of athletes in terms of stroke posture and accuracy. The kinematic analysis of the backward backhand stroke revealed that national squash players showed significant differences compared to international players in several key parameters. Specifically, national players had significantly greater trunk flexion (P=0.018) and less shoulder medial rotation (P=0.027). They also had lower racket velocity in the X-direction (P=0.043). However, there were no significant differences in trunk lateral flexion (P=0.487), trunk rotation (P=0.293), shoulder extension/flexion (P=0.396), elbow flexion/extension (P=0.818), wrist flexion/extension (P=0.177), wrist rotation (P=0.476), racket pitch (P=0.112), racket velocity in the Y-direction (P=0.587), or racket velocity in the Z-direction (P=0.327). Additionally, data for racket yaw, racket roll, and racket Vx were not provided with significant values, indicating that these parameters do not show significant differences. International level players outperformed national level players in squash stroke accuracy and control. Key kinematic factors influencing accuracy include trunk forward flexion, shoulder abduction, shoulder internal rotation, and racket angles. The study recommends that coaches design training to enhance technical details and positional control to improve squash performance.

Biomechanical and Physical Characteristics of Dental Dam Sheets Used for Absolute Isolation.

This study aimed to evaluate the mechanical and physical properties of dental dam sheets used for absolute isolation and to correlate the mechanical parameters with cost. Twenty-one dental dam sheets were tested: ALLPRIME; Madeitex; Sanctuary non-latex, Sanctuary latex black, green, and blue; Nic Tone blue and black; Mk Life; Elastidam; Bassi; Pribanic; Care; OK; MDCDental; Keystone; Dura Dam; Flexidam; Sanctuary blue; Nic Tone blue; Ehros; and USE. The thicknesses of the dental dam sheets were measured using a digital micrometer (Mitutoyo). The dental dam sheets (n=15) were prepared by cutting the samples with dimensions of 80 × 10 mm with a 1.7 mm hole made at the center of each specimen, following the ISO 9001 standard. The specimens were tested using a universal testing machine (Emic) at a speed of 500 mm/min until rupture to calculate rupture force (RF, N), elongation (%), and ultimate tensile strength (UTS, MPa), their thickness (mm) was measured using a digital micrometer, and scanning electron microscopy and X-ray energy dispersive spectroscopy were performed to analyze the structure and composition. The radiopacity was measured using digital radiography. Thickness, UTS, RF, and elongation data were analyzed by one-way ANOVA and Tukey's test (α=0.05). The Flexidam dental dam had the largest thickness (0.5 mm), while Nic Tone had a median thickness of 0.3 mm; the RF value (41.3 N) was higher for the thicker dental dams. The other dental dams had RF values ranging from 19 to 30 N. The highest elongation was obtained for the non-latex Sanctuary dental dam (600 mm). The Bassi dental dam had the highest UTS value (15 MPa), and medium and small particles were observed in most of the gums. A loss of continuity was detected in the structure of Sanctuary green and blue media. The predominant elements in the sheets were carbon, magnesium, sulfur, silicon, and calcium. The UTS, RF, and elongation varied substantially, indicating insufficient standardization of dental dam sheets. Nonetheless, most of the tested dental dams exhibited mechanical and physical properties suitable for clinical use. The correlation between the cost and mechanical properties of the dental dams was very low.

Finite element analysis of biomechanical investigation on diverse internal fixation techniques in oblique lumbar interbody fusion

BackgroundTo establish a three-dimensional finite element model of the lumbar spine and investigate the impact of different fixation techniques on the biomechanical characteristics of oblique lumbar interbody fusion (OLIF).MethodsThe study aimed to establish and validate a comprehensive three-dimensional model of the lower lumbar spine (L3-S1) using the finite element method. L4-L5 was selected as the surgical segment, and four distinct OLIF surgical models were constructed: Stand-alone (SA), unilateral cortical bone trajectory screw (UCBT), bilateral cortical bone trajectory screw (BCBT), and bilateral pedicle screw (BPS). The models were underwent a pure moment of 10N·m to simulate lumbar extension, flexion, left bending, right bending, left and right rotation movements. Subsequently, the range of motion (ROM), cage stress, and fixation stress were calculated.ResultsIn the L3-L5 segment, the BCBT group showed the most limited range of motion (ROM) under exercise load, indicating superior stability within this group. The ROM and cage stress values were found to be highest in the SA group. In contrast, the cage and internal fixation stress in the BPS group were observed to be lowest (9.91 ~ 53.83MPa, 44.93 ~ 84.85 MPa). With the exception of right bending and right rotation, the UCBT group demonstrated higher levels of internal fixation stress (102.20 ~ 164.62 MPa).ConclusionsThe study found that OLIF-assisted internal fixation improved segmental stability and reduced cage stress. The BPS group had advantages over the CBT group in preventing endplate damage and reducing the risk of cage subsidence. However, BCBT group has distinct merits in maintaining surgical segment stability, distributing stress load on the spinal motor unit, and reducing the likelihood of adjacent segment degeneration (ASD).

L5–S1 Spondylolisthesis: What Has Changed in 20 Years? A Review of Key Issues in Comparison with Personal Experience

The very first issue of the Russian Journal of Spine Surgery (2004;(1):39–46) published an article entitled “Surgical Treatment for L5 Spondylolisthesis with Transpedicular Fixators”. Twenty years later, the authors analyzed changes in approaches to surgical treatment of spondylolisthesis, taking into account the experience in surgical treatment of this pathology gained at the N.N. Priorov National Medical Research Center of Traumatology and Orthopaedics. The issues of classification, fixation methods, reduction, changes in sagittal balance, the possibility of using additive technologies and possible complications of surgical treatment are considered.In conclusion, it is noted that the development of surgical treatment methods, the study of biomechanical features, the introduction of additive technologies and much more enable improving the outcomes of spondylolisthesis treatment.

Correlation between the biomechanical characteristics and stability of the 143D movement during the balance phase in competitive Tai Chi.

To explore the biomechanical factors affecting the stability of athletes in the 143D balance phase of competitive Tai Chi. The Vicon 3D motion capture system, Kistler 3D force platform, and Noraxon surface electromyography (sEMG) system were used to measure the joint angle, joint moment, center of gravity, ground reaction force, and sEMG data of athletes. The stability index was then calculated according to the formula. Pearson's or Spearman's correlation tests were used to analyze the associations between the biomechanical factors and stability index. (1) Medial lateral stability index (MLSI): A significant negative correlation was found between the ankle inversion angle of the supporting leg (SL) and MLSI (p < 0.05). (2) Anterior posterior stability index (APSI): Significant negative correlations were observed between the ankle intorsion angle, integrated electromyography (iEMG) of the gastrocnemius, and muscle contribution rates of the tibialis anterior, external oblique, and gastrocnemius of the non-supporting leg (NL) with the APSI (p < 0.05). The ankle dorsiflexion moment, iEMG of the rectus femoris and tibialis anterior, muscle contribution rate of the biceps femoris, and root mean-squared (RMS) amplitude of the gluteus maximus of the SL also showed significant negative correlations with the APSI (p < 0.05). Strong and significant negative correlations were also identified between the hip intorsion angle, iEMG of the tibialis anterior, and RMS amplitude of the rectus femoris of the NL with the APSI (p < 0.01). Further strong and significant negative correlation was also found between the RMS amplitude of the biceps femoris of the SL and APSI (p < 0.01). The knee extorsion angle of the NL was positively correlated with the APSI (p < 0.05). (3) Dynamic postural stability index (DPSI): The knee adduction angle, iEMG of the tibialis anterior, and RMS amplitude of the erector spinae of the NL were significantly positively correlated with the DPSI (p < 0.05). The knee abduction and hip extension moments of the SL were also significantly positively correlated with the DPSI (p < 0.05). The ankle inversion angle of the SL impacts left-right stability, while the NL's hip and ankle intorsion angles, knee extorsion angle, and exertion on the core muscle and SL's main muscles, as well as exertion of specific muscles of the NL affect anterior-posterior stability. The hip extension and knee abduction moments of the SL, knee adduction angle, exertion on the tibialis anterior, and activation of the erector spinae of the NL significantly affect the overall stability of an athlete.

Effect of mediolateral leg perturbations on walking balance in people with chronic stroke: A randomized controlled trial.

Many people with chronic stroke (PwCS) exhibit deficits in step width modulation, an important strategy for walking balance. A single exposure to swing leg perturbations can temporarily strengthen this modulation. The objective of this parallel, double-blinded, randomized controlled trial was to investigate whether repeated perturbations cause sustained increases in step modulation (NCT02964039; funded by the VA). 54 PwCS at the Medical University of South Carolina were randomly assigned to one of three intervention groups: Control (n = 18), with minimal forces; Assistive (n = 18), pushing the swing leg toward a mechanically appropriate location; Perturbing (n = 18), pushing the swing leg away from a mechanically appropriate location. All intervention groups included 24 training sessions over 12-weeks with up to 30-minutes of treadmill walking while interfaced with a novel force-field and a 12-week follow-up period, with five interspersed assessment sessions. Our primary outcome measure was paretic step width modulation, the partial correlation between step width and pelvis displacement (ρSW). Secondarily, we quantified swing and stance leg contributions to step modulation, clinical assessments of walking balance and confidence, and real-world falls. Outcomes were analyzed for participants who completed all assessment sessions (n = 44). Only the Perturbing group exhibited significant increases in paretic ρSW, which were present after 4-weeks of training and sustained through follow-up (t = 2.42-3.17). These changes were due to improved control of paretic swing leg positioning. However, perturbation-induced changes in step modulation were not always significantly greater than those in the Control group, and clinical assessments were similar across intervention groups. Participants in the Perturbing group experienced a lower fall rate than those in the Control group (incidence rate ratio = 0.53), although our small sample size warrants caution. The present results indicate that perturbations can cause sustained modifications of targeted biomechanical characteristics of post-stroke gait, although such changes alone may be insufficient to change more complex clinical assessments.

Biomechanical characteristics of ligament injuries in the knee joint during impact in the upright position: a finite element analysis

BackgroundOur study aims to examine stress–strain data of the four major knee ligaments—the anterior cruciate ligament (ACL), the posterior cruciate ligament (PCL), the medial collateral ligament (MCL), and the lateral collateral ligament (LCL)—under transient impacts in various knee joint regions and directions within the static standing position of the human body. Subsequently, we will analyze the varying biomechanical properties of knee ligaments under distinct loading conditions.MethodsA 3D simulation model of the human knee joint including bone, meniscus, articular cartilage, ligaments, and other tissues, was reconstructed from MRI images. A vertical load of 300 N was applied to the femur model’s top surface to mimic the static standing position, and a 134 N load was applied to the impacted area of the knee joint. Nine scenarios were created to examine the effects of anterior, posterior, and lateral external forces on the upper, middle, and lower regions of the knee joint.ResultsThe PCL exhibited the highest stress levels among the four ligaments when anterior loads were applied to the upper, middle, and lower parts of the knee, with maximum stresses at the PCL-fibula junction measuring 59.895 MPa, 27.481 MPa, and 28.607 MPa, respectively. Highest stresses on the PCL were observed under posterior loads on the upper, middle, and lower knee areas, with peak stresses of 57.421 MPa, 38.147 MPa, and 26.904 MPa, focusing notably on the PCL-tibia junction. When a lateral load was placed on the upper knee joint, the ACL showed the highest stress 32.102 MPa. Likewise, in a lateral impact on the middle knee joint, the ACL also had the highest stress of 29.544 MPa, with peak force at the ACL-tibia junction each time. In a lateral impact on the lower knee area, the LCL had the highest stress of 22.279 MPa, with the highest force at the LCL-fibula junction. Furthermore, the maximum stress data table indicates that stresses in the ligaments are typically higher when the upper portion of the knee is affected compared to when the middle and lower parts are impacted.ConclusionsThis study recommends people avoid impacting the upper knee and use the middle and lower parts of the knee effectively against external forces to minimize ligament damage and safeguard the knee.

Machine learning and artificial intelligence: Enabling the clinical translation of atomic force microscopy-based biomarkers for cancer diagnosis

The influence of biomechanics on cell function has become increasingly defined over recent years. Biomechanical changes are known to affect oncogenesis; however, these effects are not yet fully understood. Atomic force microscopy (AFM) is the gold standard method for measuring tissue mechanics on the micro- or nano-scale. Due to its complexity, however, AFM has yet to become integrated in routine clinical diagnosis. Artificial intelligence (AI) and machine learning (ML) have the potential to make AFM more accessible, principally through automation of analysis. In this review, AFM and its use for the assessment of cell and tissue mechanics in cancer is described. Research relating to the application of artificial intelligence and machine learning in the analysis of AFM topography and force spectroscopy of cancer tissue and cells are reviewed. The application of machine learning and artificial intelligence to AFM has the potential to enable the widespread use of nanoscale morphologic and biomechanical features as diagnostic and prognostic biomarkers in cancer treatment.

Biomechanical study of the stability of posterior cervical expansive open-door laminoplasty combined with bilateral C4/5 foraminotomy and short-segment lateral mass screw fixation: a finite element analysis

BackgroundPosterior cervical expansive open-door laminoplasty (EODL) may cause postoperative C5 palsy, and it can be avoided by EODL with bilateral C4/5 foraminotomy. However, prophylactic C4/5 foraminotomy can compromise cervical spine stability. To prevent postoperative C5 palsy and boost cervical stability, We propose a new operation method: EODL combined with bilateral C4/5 foraminotomy and short-segment lateral mass screw fixation. However, there are no studies on the biomechanical properties of this surgery.PurposeEvaluating the biomechanical characteristics of EODL combined with bilateral C4/5 foraminotomy and short-segment lateral mass screw fixation and other three classic surgery.MethodsAn original model (A) and four surgical models (B-E) of the C2-T1 vertebrae of a female patient were constructed. (B) EODL; (C) EODL combined with bilateral C4/5 foraminotomy; (D) C3-6 expansive open-door laminoplasty combined with bilateral C4/5 foraminotomy and short-segment lateral mass screw fixation; (E) C3-6 expansive open-door laminoplasty combined with bilateral C4/5 foraminotomy and C3-6 lateral mass screw system. To compare the biomechanical properties of cervical posterior internal fixation; (E) C3-6 expansive open-door laminoplasty combined with bilateral C4/5 foraminotomy and C3-6 lateral mass screw system. To compare the biomechanical properties of cervical posterior internal fixation methods, six physiological motion states were simulated for the five models using a 100N load force and 1.5Nm torque. The biomechanical advantages of the four internal fixation systems were evaluated by comparing the ranges of motion (ROMs) and maximum stresses.Results The overall ROM of Model C outperformed the other four models, reaching a maximum ROM in the extension state of 10.59°±0.04°. Model C showed a significantly higher ROMs of C4/5 segment than other four models. Model D showed a significantly lower ROM of C4/5 segment than both Model B and Model C. Model E showed a significantly lower ROM of C4/5 segment than Model D. The stress in the four surgical models were mainly concentrated on the internal fixation systems.ConclusionEODL combined with bilateral C4/5 foraminotomy and short-segment lateral mass screw fixation can maintain the stability of the spine and has minimal effects on the patient’s cervical spine ROMs in the extension and flexion state. As a result, it may be a promising treatment option for cervical spondylotic myelopathy (CSM) to prevention of postoperative C5 palsy.

Comparison of a Novel Modified PLA/HA Bioabsorbable Interference Screw With Conventional PLGA/β-TCP Screw: Effect on 1-Year Postoperative Tibial Tunnel Widening in a Canine ACLR Model.

Tibial bone tunnel widening (TW) is a common postoperative phenomenon after anterior cruciate ligament reconstruction (ACLR). To compare the physical, biomechanical, osteoinductive, and histological characteristics of 2 fabricated bioabsorbable interference screws: (1) a modified poly(l-lactide-co-d, l-lactide) and hydroxyapatite (mPLA/HA) screw and (2) a poly(l-lactide-co-glycolide) and β-tricalcium phosphate (PLGA/β-TCP) screw; and to evaluate the effect of the PLA/HA screw on ameliorating postoperative TW in a canine ACLR model. Controlled laboratory study. In vitro, the physical and biomechanical properties of the mPLA/HA and PLGA/β-TCP screws were tested. The osteoinductive activity of the screws was studied by cell experiments. In vivo, ACLR was performed on 48 beagle dogs, divided into the mPLA/HA group and the PLGA/β-TCP group. The femoral and tibial ends of the graft were both fixed with screws. Six animals in each group were sacrificed after live computed tomography (CT) scanning at 1, 3, 6, and 12 months postoperatively. For six knee samples of each group, three knee samples underwent biomechanical testing, and 1 of them, along with the other 3 samples, underwent micro-CT and histological examination to evaluate tibial TW. The mPLA/HA screw exhibited better particle dispersion, bending strength, desirable self-locking effect, and optimized degradation behavior both in vivo and in vitro. Histologically, the mPLA/HA screw had comparative osteoinductive activity. There was good screw-bone integration using the mPLA/HA screw, while most fibrous scar healing was in the PLGA/β-TCP group. There were significant differences between the mPLA/HA and PLGA/β-TCP groups in tibial bone tunnel diameter at the screw body (6 months postoperatively: 5.09 ± 0.44 vs 7.12 ± 0.67; 12 months postoperatively: 4.83 ± 0.27 vs 6.23 ± 0.56; P < .01 for both) and the screw tail (6 months postoperatively: 4.84 ± 0.28 vs 5.97 ± 0.73; 12 months postoperatively: 4.77 ± 0.29 vs 5.92 ± 0.56; P < .01 for both). Compared with the PLGA/β-TCP screw commonly used in clinics at present, the mPLA/HA screw had comparative biosafety and mechanical properties, satisfactory biomechanical properties, and osteoinductive activity in vivo and in vitro. It effectively ameliorated the postoperative tibial TW in a canine ACLR model and increased the quality of screw-bone integration. The good mechanical and biological properties of the mPLA/HA screws may provide an option to reduce the incidence of complications after ACLR.

TCT-1012 Pre-Emptive PCI in Vulnerable Coronary Plaques Reduces Biomechanical and Anatomic High-Risk Features: The PROSPECT ABSORB Trial

TCT-1012 Pre-Emptive PCI in Vulnerable Coronary Plaques Reduces Biomechanical and Anatomic High-Risk Features: The PROSPECT ABSORB Trial

Biomechanical comparison of Gofried positive support reduction of Pauwels type III femoral neck fractures: A finite elements analysis

ObjectiveThis study aims to investigate the biomechanical characteristics of non-anatomical reduction and different screw positions on the stability of Pauwels type III femoral neck fractures. MethodsThree-dimensional finite element models of femoral neck fractures were constructed using CT images. Four types of internal fixation methods were simulated, including biplane double-supported screw fixation (BDSF), three inverted triangular parallel cannulated screws (3CS), new parallel cannulated screws with posterior screws moving down (New 3CS), and two parallel cannulated screws (2CS). von Mises stress and total displacement were compared between the fracture models after the femoral head was subjected to an axial load of 2100 N. Stress and displacement data for the implants and the femur were recorded for each fixation method and compared. ResultsThe results demonstrated that positive reduction of a Pauwels type III femoral neck fracture provided greater stability than neutral or negative reduction. Specifically, the BDSF group showed the lowest maximum von Mises stress in the femur (17.66 MPa) in positive reduction, compared to 3CS (21.08 MPa), New 3CS (22.14 MPa), and 2CS (36.57 MPa). The total displacement of positive reduction in the BDSF group was 0.3143 mm, which was lower than in the 3CS (0.3498 mm), New 3CS (0.3343 mm), and 2CS (0.4533 mm) groups. The stress distribution in the positive support reduction group was lower than that of the other groups, indicating better load distribution. Among the three-screw fixation methods, the New 3CS system exhibited the highest stress in the screws (with a peak of 28.62 MPa), while the 2CS group displayed the highest stresses overall, both in the femur and the screws. ConclusionFor Pauwels type III femoral neck fractures, a positive support reduction with BDSF fixation exhibited superior biomechanical performance than negative reduction. Based on the finite element analysis conducted in this study, the positive support reduction with BDSF fixation can enhance fixation stability, suggesting that non-anatomical reduction is recommended.

Mathematical Models for Ultrasound Elastography: Recent Advances to Improve Accuracy and Clinical Utility.

Changes in biomechanical properties such as elasticity modulus, viscosity, and poroelastic features are linked to the health status of biological tissues. Ultrasound elastography is a non-invasive imaging tool that quantitatively maps these biomechanical characteristics for diagnostic and treatment monitoring purposes. Mathematical models are essential in ultrasound elastography as they convert the raw data obtained from tissue displacement caused by ultrasound waves into the images observed by clinicians. This article reviews the available mathematical frameworks of continuum mechanics for extracting the biomechanical characteristics of biological tissues in ultrasound elastography. Continuum-mechanics-based approaches such as classical viscoelasticity, elasticity, and poroelasticity models, as well as nonlocal continuum-based models, are described. The accuracy of ultrasound elastography can be increased with the recent advancements in continuum modelling techniques including hyperelasticity, biphasic theory, nonlocal viscoelasticity, inversion-based elasticity, and incorporating scale effects. However, the time taken to convert the data into clinical images increases with more complex models, and this is a major challenge for expanding the clinical utility of ultrasound elastography. As we strive to provide the most accurate imaging for patients, further research is needed to refine mathematical models for incorporation into the clinical workflow.

Nonlinear biomechanical behaviour of extracranial carotid artery aneurysms in the framework of Windkessel effect via FSI technique

Extracranial carotid artery aneurysms (ECCA) lead to rupture and neurologic symptoms from embolisation, with potentially fatal outcomes. Investigating the biomechanical behaviour of EECA with blood flow dynamics is crucial for identifying regions more susceptible to rupture. A coupled three-dimensional (3D) Windkessel-framework and hyperelastic fluid-structure interaction (FSI) analysis of ECCAs with patient-specific geometries, was developed in this paper with a particular focus on hemodynamic parameters and the arterial wall's biomechanical response. The blood flow has been modelled as non-Newtonian, pulsatile, and turbulent. The biomechanical characteristics of the aneurysm and artery are characterised employing a 5-parameter Mooney-Rivlin hyperelasticity model. The Windkessel effect is also considered to efficiently simulate pressure profile of the outlets and to capture the dynamic changes over the cardiac cycle. The study found the aneurysm carotid artery exhibited the high levels of pressure, wall shear stress (WSS), oscillatory shear index (OSI), and relative residence time (RRT) compared to the healthy one. The deformation of the arterial wall and the corresponding von Mises (VM) stress were found significantly increased in aneurysm cases, in comparison to that of no aneurysm cases, which strongly correlated with the hemodynamic characteristics of the blood flow and the geometric features of the aneurysms. This escalation would intensify the risk of aneurysm wall rupture. These findings have critical implications for enhancing treatment strategies for patients with extracranial aneurysms.

Analysis of Human Biomechanical Characteristics in Sprint Sports

Analysis of Human Biomechanical Characteristics in Sprint Sports