Biomechanical Characterization Research Articles

Biomechanical paradigm and interpretation of female pelvic floor conditions before a treatment.

BackgroundFurther progress in restoring a woman’s health may be possible if a patient with a damaged pelvic floor could undergo medical imaging and biomechanical diagnostic tests. The results of such tests could contribute to the analysis of multiple treatment options and suggest the optimal one for that patient.AimTo develop a new approach for the biomechanical characterization of vaginal conditions, muscles, and connective tissues in the female pelvic floor.MethodsVaginal tactile imaging (VTI) allows biomechanical assessment of the soft tissue along the entire length of the anterior, posterior, and lateral vaginal walls at rest, with manually applied deflection pressures and with muscle contraction, muscle relaxation, and Valsalva maneuver. VTI allows a large body of measurements to evaluate individual variations in tissue elasticity, support defects, as well as pelvic muscle function. Presuming that 1) the female pelvic floor organs are suspended by ligaments against which muscles contract to open or close the outlets and 2) damaged ligaments weaken the support and may reduce the force of muscle contraction, we made an attempt to characterize multiple pelvic floor structures from VTI data.ResultsAll of the 138 women enrolled in the study were successfully examined with the VTI. The study subjects have had normal pelvic support or pelvic organ prolapse (stages I–IV). The average age of this group of subjects was 60±15 years. We transposed a set of 31 VTI parameters into a quantitative characterization of pelvic muscles and ligamentous structures. Interpretation of the acquired VTI data for normal pelvic floor support and prolapse conditions is proposed based on biomechanical assessment of the functional anatomy.ConclusionVaginal tactile imaging allows biomechanical characterization of female pelvic floor structures and tissues in vivo, which may help to optimize treatment of the diseased conditions such as prolapse, incontinence, atrophy, and some forms of pelvic pain.

Functional assessment in a case of meniscopathy. Usefulness of an application to evaluate gait, single-limb support and the climb and descent of stairs in front of isolated gait studies in the biomechanical characterization of the knee

Functional assessment in a case of meniscopathy. Usefulness of an application to evaluate gait, single-limb support and the climb and descent of stairs in front of isolated gait studies in the biomechanical characterization of the knee

Biomechanical characterization of a novel ring connector for sutureless aortic anastomosis.

The surgical treatment for aortic diseases remains a challenge for any cardiac surgeon. The use of sutureless ring connector in aortic anastomosis can simplify the procedure and shorten anastomosis time. Therefore, we developed a novel device for sutureless aortic anastomosis. A series of experiments were carried out for tensile and leakproof-capacity assessments to verify the feasibility of the ring connector by using fresh swine aorta samples. In in vivo test, the ring connector was implanted in 6 swine with follow-up of 6 months. Radiographic and pathological studies of the aorta were performed. In the tensile tests, the strength was 32.7±5.9 Newton (N) in the sutureless anastomosis group, compared with 73.3±12.5 N in the control group by traditional manual suture. In the leakproof-capacity assessment, no sign of either leakage or bursting was evident at 280 mmHg of internal pressure in the aorta samples. In in vivo tests, it took 9.47±0.3 minutes for the sutureless anastomosis, compared with 15.58±1.39 minutes for hand-sewn suturing. Insertion was easy and rapid. Radiographic and pathological studies were performed at first month, third month and sixth month after surgery, each time obtained from the two swine, showed patency of the anastomosis and no signs of stenosis, blood leakage, migration or pseudoaneurysm formation, except one paralyzed swine developed of thrombo-occlusion at the site of the sutureless anastomosis. The result indicates that this novel ring connector offers considerable promise for sutureless aortic anastomosis.

Experimental study and biomechanical characterization for the passive small intestine: Identification of regional differences

This article reports regional differences in the inflation/extension properties and the no-load and zero-stress geometry, serving as the reference state for defining the multiaxial response, within and across the individual duodenum, jejunum, and ileum of the small intestine of middle-aged rats in the normal condition. The descriptive/predictive capacity of three phenomenological models, regularly appearing in the biomechanics literature, to characterize the anisotropic response of intestinal tissue was investigated in terms of best-fit parameters. Our inflation/extension results showed that the pressure-radius relationship was nonlinear, dissimilar to the near-constant, linear force-pressure relationship at all axial stretches, suggesting an energetically-favorable response in the entire loading range. The geometrical results showed that small intestinal dimensions were greatest in the proximal duodenum and smallest in the proximal jejunum, unlike the opening angle and circumferential residual strains that were less spatially variable; contrasting previous findings on relatively immature animals. The quadratic and exponential model was the most suitable descriptor of the passive pseudo-elastic response for the entire loading range from all regions, while the four- and seven-parameter exponential models afforded good data representations at the physiologic loading range primarily. The stress-strain and material characterization results showed progressive softening in the axial direction within the duodenum and jejunum, unlike the ileum that stiffened axially towards the caecum. Much remains to be learned as regards regional variations in biomechanical properties and the adaptive response during aging, but the reported data provide input for a quantitative analysis of physiological functions, mechanobiology, and clinical interventions, e.g. small intestine-repair device interaction.

Biomechanical Differences Between Femtosecond Lenticule Extraction (FLEx) and Small Incision Lenticule Extraction (SmILE) Tested by 2D-Extensometry in Ex Vivo Porcine Eyes.

To evaluate the biomechanical stability of ex vivo porcine corneas after femtosecond lenticule extraction (FLEx) and small incision lenticule extraction (SmILE) refractive surgeries. Forty-five porcine eyes were equally divided into three groups: Groups 1 and 2 were treated with FLEx and SmILE procedure, respectively. Group 3 served as control. A refractive correction of -14 diopters (D) with a 7-mm zone using either a 160-μm flap (FLEx) or a 160-μm cap (SmILE) was performed. For two-dimensional (2D) elastic and viscoelastic biomechanical characterization, two testing cycles (preconditioning stress-strain curve from 1.27 to 12.5 N, stress-relaxation at 12.5 N during 120 seconds) were conducted. Young's modulus and Prony constants were calculated. At 0.8% of strain, FLEx (370 ± 36 kPa) could resist a significantly lower stress than SmILE (392 ± 19 kPa, P = 0.046) and the control group (402 ± 30 kPa, P = 0.013). Also, FLEx (46.1 ± 4.5 MPa) had a significantly lower Young's modulus than the control group (50.2 ± 3.4 MPa, P = 0.008). The Young's modulus of SmILE (48.6 ± 2.5 MPa) had values situated between untreated corneas and FLEx-treated corneas. When compared to untreated controls, the stress resistance decreased by 8.0% with FLEx and 2.5% with SmILE; Young's modulus decreased by 5.1% with FLEx and 1.04% with SmILE. With a cap-based procedure, both anterior cap and stromal bed carry the intraocular pressure, while in a flap-based procedure, only the stromal bed does. Compared to flap-based procedures like FLEx, the cap-based technique SmILE can be considered superior in terms of biomechanical stability, when measured experimentally in ex vivo porcine corneas.

An Indirect Indentation Method for Evaluating the Linear Viscoelastic Properties of the Brain Tissue.

Indentation experiments offer a robust, fast, and repeatable testing method for evaluating the mechanical properties of the solid-state materials in a wide stiffness range. With the advantage of requiring a minimal sample preparation and multiple tests on a small piece of specimen, this method has recently become a popular technique for measuring the elastic properties of the biological materials, especially the brain tissue whose ultrasoft nature makes its mechanical characterization very challenging. Nevertheless, some limitations are associated with the indentation of the brain tissue, such as improper surface detection, negative initial contact force due to tip-tissue moisture interaction, and partial contact between the tip and the sample. In this study, an indirect indentation scheme is proposed to overcome the aforementioned difficulties. In this way, the indentation force is transferred from a sharp tip to the surface of the tissue slices via a rigid coverslip. To demonstrate the accuracy of this method, the linear viscoelastic properties of the white and gray matters of the bovine brain samples are measured by imposing small cyclic loads at different frequencies. The rate, regional, directional, and postmortem time dependence of the viscoelastic moduli are investigated and compared with the previous results from cyclic shear and monotonic experiments on the brain tissue. While findings of this research present a comprehensive set of information for the viscoelastic properties of the brain at a wide frequency range, the central goal of this paper is to introduce a novel experimentation technique with noticeable advantages for biomechanical characterization of the soft tissue.

Biomechanical characterization of the periodontal ligament: Orthodontic tooth movement

Biomechanical characterization of the periodontal ligament: Orthodontic tooth movement

Biomechanical Characterization of Marimba Playing in Relation to the Strength of Sound

Biomechanical Characterization of Marimba Playing in Relation to the Strength of Sound

Biomechanical Characterization of Onion Epidermal Cell Walls.

Here we describe two experimental protocols to measure the biomechanical properties of primary (growing) plant cell walls, with a focus on analyzing cell wall epidermal strips of onion scales. The first protocol measures cell wall creep (time-dependent irreversible extension) under constant force. Such creep is often mediated by the wall-loosening action of expansin or selective endoglucanases. The second protocol is based on two consecutive stretches of the wall and measures the wall's elastic and plastic compliances, which depend on cell wall structure. These two assays provide complementary information that may be linked to cell wall structure and expansive growth of cells.

Biomechanical Characterization of Human Soft Tissues Using Indentation and Tensile Testing.

Regenerative medicine aims to engineer materials to replace or restore damaged or diseased organs. The mechanical properties of such materials should mimic the human tissues they are aiming to replace; to provide the required anatomical shape, the materials must be able to sustain the mechanical forces they will experience when implanted at the defect site. Although the mechanical properties of tissue-engineered scaffolds are of great importance, many human tissues that undergo restoration with engineered materials have not been fully biomechanically characterized. Several compressive and tensile protocols are reported for evaluating materials, but with large variability it is difficult to compare results between studies. Further complicating the studies is the often destructive nature of mechanical testing. Whilst an understanding of tissue failure is important, it is also important to have knowledge of the elastic and viscoelastic properties under more physiological loading conditions.This report aims to provide a minimally destructive protocol to evaluate the compressive and tensile properties of human soft tissues. As examples of this technique, the tensile testing of skin and the compressive testing of cartilage are described. These protocols can also be directly applied to synthetic materials to ensure that the mechanical properties are similar to the native tissue. Protocols to assess the mechanical properties of human native tissue will allow a benchmark by which to create suitable tissue-engineered substitutes.

Biomechanical characterization of spider webs

In light of recent focus on the behaviour of the natural structures for revolutionary technological growth, spider web seems to have seized considerable attention of product designer due to its amazing behaviour. In present work, mechanism behind the structural integrity of the spider web along with the materialistic analysis of its constituent silk threads has been extensively investigated. The nanoindentation tool both in static and dynamic mode has been utilized for complete analysis of the mechanical behaviour of the spiral and radial threads separately. Both the average elastic modulus and hardness of the radial silk thread is higher than the spiral silk thread which reveals the radial silk thread is the major structural component of the web. The sustainability of spider webs under storm, windy conditions and during the impact of pray has been investigated under dynamic conditions. The radial silk thread exhibits elastic like response and the spiral silk thread exhibits viscous like response in a wide frequency range (1–200Hz). The damping characteristic of the radial and spiral silk threads, an important parameter to investigate the energy dissipation properties of the materials has also been investigated in windy conditions.

Biomechanical Characterization of Human Soft Tissues Using Indentation and Tensile Testing

Regenerative medicine aims to engineer materials to replace or restore damaged or diseased organs. The mechanical properties of such materials should mimic the human tissues they are aiming to replace; to provide the required anatomical shape, the materials must be able to sustain the mechanical forces they will experience when implanted at the defect site. Although the mechanical properties of tissue-engineered scaffolds are of great importance, many human tissues that undergo restoration with engineered materials have not been fully biomechanically characterized. Several compressive and tensile protocols are reported for evaluating materials, but with large variability it is difficult to compare results between studies. Further complicating the studies is the often destructive nature of mechanical testing. Whilst an understanding of tissue failure is important, it is also important to have knowledge of the elastic and viscoelastic properties under more physiological loading conditions. This report aims to provide a minimally destructive protocol to evaluate the compressive and tensile properties of human soft tissues. As examples of this technique, the tensile testing of skin and the compressive testing of cartilage are described. These protocols can also be directly applied to synthetic materials to ensure that the mechanical properties are similar to the native tissue. Protocols to assess the mechanical properties of human native tissue will allow a benchmark by which to create suitable tissue-engineered substitutes.

Real-time mechanical characterization of DNA degradation under therapeutic X-rays and its theoretical modeling.

The killing of tumor cells by ionizing radiation beams in cancer radiotherapy is currently based on a rather empirical understanding of the basic mechanisms and effectiveness of DNA damage by radiation. By contrast, the mechanical behaviour of DNA encompassing sequence sensitivity and elastic transitions to plastic responses is much better understood. A novel approach is proposed here based on a micromechanical Silicon Nanotweezers device. This instrument allows the detailed biomechanical characterization of a DNA bundle exposed to an ionizing radiation beam delivered here by a therapeutic linear particle accelerator (LINAC). The micromechanical device endures the harsh environment of radiation beams and still retains molecular-level detection accuracy. In this study, the first real-time observation of DNA damage by ionizing radiation is demonstrated. The DNA bundle degradation is detected by the micromechanical device as a reduction of the bundle stiffness, and a theoretical model provides an interpretation of the results. These first real-time observations pave the way for both fundamental and clinical studies of DNA degradation mechanisms under ionizing radiation for improved tumor treatment.

Loss of mechanical directional dependency of the ascending aorta with severe medial degeneration.

Biomechanical characterization of the aortic wall may help risk stratify patients with aneurysms. We investigated the degree of anisotropy, the directional dependency of mechanical properties, in control and aneurysmal ascending aortic tissue. We hypothesized that medial degeneration and aortic wall remodeling as found in aneurysmal tissue alter energy loss in both the circumferential and longitudinal directions, thereby reducing anisotropy. Aneurysmal and control ascending aortic tissue excised during surgery was subjected to biaxial tensile testing. Stress-strain relationships were collected in the circumferential and longitudinal directions; from these data, the mechanical properties of energy loss and the apparent modulus of elasticity were derived, and the associated anisotropy indices were calculated. Movat pentachrome histological staining was performed, and aortic wall medial degeneration was quantified. Energy loss was greater in the circumferential than the longitudinal direction, demonstrating significant anisotropy in both normal and aneurysmal aortas (P<.0001). This directional dependency diminished in (a) larger aortas (r2=0.15, P=.01), especially when indexed to body surface area (r2=0.29, P=.002); (b) aortas with greater overall energy loss (r2=0.44, P<.0001); (3) aortas associated with tricuspid valves (P=.004); and (4) higher collagen-to-elastin ratio (r2=0.29, P=.001). Aortas with collagen-to-elastin ratios greater than 2 were uniformly isotropic. Furthermore, the greatest energy loss anisotropy was found on the inner curvature of the aorta (P=.01). Energy loss demonstrates the directional dependency of aortic tissue. Energy loss isotropy is associated with medial degeneration, indicating that microstructural changes can be captured by global biomechanics, thereby identifying it as a marker of disease severity.

Biomechanical Characterization of Ascending Aortic Aneurysms

Ascending thoracic aortic aneurysms (ATAAs) are a silent disease, ultimately leading to dissection or rupture of the arterial wall. There is a growing consensus that diameter information is insufficient to assess rupture risk, whereas wall stress and strength provide a more reliable estimate. The latter parameters cannot be measured directly and must be inferred through biomechanical assessment, requiring a thorough knowledge of the mechanical behaviour of the tissue. However, for healthy and aneurysmal ascending aortic tissues, this knowledge remains scarce. This study provides the geometrical and mechanical properties of the ATAA of six patients with unprecedented detail. Prior to their ATAA repair, pressure and diameter were acquired non-invasively, from which the distensibility coefficient, pressure-strain modulus and wall stress were calculated. Uniaxial tensile tests on the resected tissue yielded ultimate stress and stretch values. Parameters for the Holzapfel-Gasser-Ogden material model were estimated based on the pre-operative pressure-diameter data and the post-operative stress-stretch curves from planar biaxial tensile tests. Our results confirmed that mechanical or geometrical information alone cannot provide sufficient rupture risk estimation. The ratio of physiological to ultimate wall stress seems a more promising parameter. However, wall stress estimation suffers from uncertainties in wall thickness measurement, for which our results show large variability, between patients but also between measurement methods. Our results also show a large strength variability, a value which cannot be measured non-invasively. Future work should therefore be directed towards improved accuracy of wall thickness estimation, but also towards the large-scale collection of ATAA wall strength data.

Dynamic biomechanical characterization of colon tissue according to anatomical factors

IntroductionThe aim of this study was to determine the mechanical response of colonic specimens retrieved from the entire human colon and placed under dynamic solicitation until the tissue ruptured. Material and methodsSpecimens were taken from 20 refrigerated cadavers from different locations of the colonic frame (ascending, transverse, descending and sigmoid colon) in two different directions (longitudinal and circumferential), with or without muscle strips (taenia coli). A total of 120 specimens were subjected to tensile tests, after preconditioning, at the speed of 1m/s. ResultsHigh-speed video analysis showed a bilayer injury process with an initial rupture of the serosa / external muscular layer followed by a second rupture of the inner layer consisting of the internal muscle / submucosa / mucosa.The mechanical response was biphasic, with a first point of initial damage followed by a complete rupture. The levels of stress and strain at the failure site were statistically greater in terms of circumferential stress (respectively 69±22% and 1.02±0.50MPa) than for longitudinal stress (respectively 55±32% and 0.70±0.34MPa). The difference between longitudinal and circumferential stress was not statistically significant (3.17±2.05MPa for longitudinal stress and 3.15±1.73MPa for circumferential stress). The location on colic frame significantly modified the mechanical response both longitudinally and circumferentially, whereas longitudinal taenia coli showed no mechanical influence. ConclusionThe mechanical response of the colon specimen under dynamic uniaxial solicitation showed a bilayer and biphasic injury process depending on the direction of solicitation and colic localization. Furthermore these results could be integrated into a numeric model reproducing abdominal trauma to better understand and prevent intestinal injuries.

CorMatrix valved conduit in a porcine model: long-term remodelling and biomechanical characterization.

Porcine small intestinal submucosa extracellular matrix (CorMatrix; CorMatrix Cardiovascular, Rosewell, GA) is a relatively novel tissue substitute used in cardiovascular applications. We investigated the biological reaction and remodelling of CorMatrix as a tri-leaflet valved conduit in a pig model. We hypothesized that CorMatrix maintains a durable architecture as a valved conduit and remodels to resemble surrounding tissues. We fashioned the valved conduit using a 7 × 10 cm 4-ply CorMatrix sheet and placed it in the thoracic aorta of seven landrace pigs for 3, 4, 5 and 6 months. Biodegradation, replacement by native tissue, strength and durability were examined by histology, immunohistochemistry and mechanical testing. Four pigs, one per time frame, completed the study. The conduit lost its original architecture as a tri-leaflet valve due to cusp immobility, subsequent attachment to the wall segment and consequent maintenance of a thick arterial wall-like structure. Scaffold resorption was incomplete, with disorganized inconsistent spatial and temporal degradation even at 6 months. Fibrosis, scarring and calcification started at 4 months and chronic inflammation persisted. The partially remodelled scaffold did not resemble the aortic wall, suggesting impaired remodelling. Mechanical testing showed progressive weakening of the tissues over time, which were liable to breakage. CorMatrix is biodegradable; however, it failed to remodel in a structured and anatomical fashion in an arterial environment. Progressive mechanical and remodelling failure in this scenario might be explained by the complexity of the conduit design and the host's chronic inflammatory response, leading to early fibrosis and calcification.

Biomechanical characterization of the periodontal ligament: Orthodontic tooth movement

To quantify the biomechanical properties of the bovine periodontal ligament (PDL) in postmortem sections and to apply these properties to study orthodontic tooth intrusion using finite element analysis (FEA). We hypothesized that PDL's property inherited heterogeneous (anatomical dependency) and nonlinear stress-strain behavior that could aid FEA to delineate force vectors with various rectangular archwires. A dynamic mechanical analyzer was used to quantify the stress-strain behavior of bovine PDL. Uniaxial tension tests using three force levels (0.5, 1, and 3 N) and samples from two anatomical locations (circumferential and longitudinal) were performed to calculate modulus. The Mooney-Rivlin hyperelastic (MRH) model was applied to the experimental data and used in an FEA of orthodontic intrusion rebounded via a 0.45-mm step bend with three archwire configurations of two materials (stainless steel and TMA). Force levels and anatomical location were statistically significant in their effects on modulus (P < .05). The apical part had a greater stiffness than did the middle part. The MRH model was found to approximate the experimental data well (r = 0.99), and it demonstrated a reasonable stress-strain outcome within the PDL and bone for FEA intrusion simulation. The force acting on the tooth increased five times from the 0.016 × 0.022-inch TMA to the 0.019 × 0.025-inch stainless steel. The PDL is a nonhomogeneous tissue in which the modulus changed in relation to location. PDL nonlinear constitutive model estimated quantitative force vectors for the first time to compare intrusive tooth movement in 3-D space in response to various rectangular archwires.

Choosing sheep (Ovis aries) as animal model for temporomandibular joint research: Morphological, histological and biomechanical characterization of the joint disc

Preclinical trials are essential to the development of scientific technologies. Remarkable molecular and cellular research has been done using small animal models. However, significant differences exist regarding the articular behavior between these models and humans. Thus, large animal models may be more appropriate to perform trials involving the temporomandibular joint (TMJ). The aim of this work was to make a morphological (anatomic dissection and white light 3D scanning system), histological (TMJ in bloc was removed for histologic analysis) and biomechanical characterization (tension and compression tests) of sheep TMJ comparing the obtained results with human data. Results showed that sheep processus condylaris and fossa mandibularis are anatomically similar to the same human structures. TMJ disc has an elliptical perimeter, thinner in the center than in periphery. Peripheral area acts as a ring structure supporting the central zone. The disc cells display both fibroblast and chondrocyte-like morphology. Marginal area is formed by loose connective tissue, with some chondrocyte-like cells and collagen fibers in diverse orientations. Discs obtained a tensile modulus of 3.97±0.73MPa and 9.39±1.67MPa, for anteroposterior and mediolateral assessment. The TMJ discs presented a compressive modulus (E) of 446.41±5.16MPa and their maximum stress value (σmax) was 18.87±1.33MPa. Obtained results suggest that these animals should be considered as a prime model for TMJ research and procedural training. Further investigations in the field of oromaxillofacial surgery involving TMJ should consider sheep as a good animal model due to its resemblance of the same joint in humans.

Biomechanical Characterisation of the Human Auricular Cartilages; Implications for Tissue Engineering.

Currently, autologous cartilage provides the gold standard for auricular reconstruction. However, synthetic biomaterials offer a number of advantages for ear reconstruction including decreased donor site morbidity and earlier surgery. Critical to implant success is the material’s mechanical properties as this affects biocompatibility and extrusion. The aim of this study was to determine the biomechanical properties of human auricular cartilage. Auricular cartilage from fifteen cadavers was indented with displacement of 1 mm/s and load of 300 g to obtain a Young’s modulus in compression. Histological analysis of the auricle was conducted according to glycoprotein, collagen, and elastin content. The compression modulus was calculated for each part of the auricle with the tragus at 1.67 ± 0.61 MPa, antitragus 1.79 ± 0.56 MPa, concha 2.08 ± 0.70 MPa, antihelix 1.71 ± 0.63 MPa, and helix 1.41 ± 0.67 MPa. The concha showed to have a significantly greater Young’s Elastic Modulus than the helix in compression (p < 0.05). The histological analysis demonstrated that the auricle has a homogenous structure in terms of chondrocyte morphology, extracellular matrix and elastin content. This study provides new information on the compressive mechanical properties and histological analysis of the human auricular cartilage, allowing surgeons to have a better understanding of suitable replacements. This study has provided a reference, by which cartilage replacements should be developed for auricular reconstruction.Electronic supplementary materialThe online version of this article (doi:10.1007/s10439-016-1688-1) contains supplementary material, which is available to authorized users.