Biomass Production Research Articles

Towards maximizing biomass and lipid productivity: high-throughput screening assay for prospecting heterotrophic growth for new microalgal isolates

BackgroundMicroalgae have emerged as sustainable alternatives to fossil fuels and high-value petrochemicals. Despite the commercial potential of microalgae, their low biomass productivity is a significant limiting factor for large-scale production. In the photoautotrophic cultivation of microalgae, achievable cell density levels depend on the light transmittance of the production system, which can significantly decrease the photosynthetic rate and biomass production. In contrast, the mixotrophic cultivation of microalgae using heterotrophic carbon sources enables high-density cultivation, which significantly enhances biomass productivity. The identification of optimal production conditions is crucial for improving biomass productivity; however, it is typically time- and resource-consuming. To overcome this problem, high-throughput screening (HTS) system presents a practical approach to maximize biomass and lipid production and enhance the industrial applicability of microalgae.ResultsIn this study, we proposed a two-step HTS assay that allows effective screening of heterotrophic conditions compatible with new microalgal isolates. To confirm the effectiveness of the HTS assay, three microalgal isolates with distinctive morphological and genetic traits were selected. Suitable cultivation conditions, including various heterotrophic carbon sources, substrate concentrations, and temperatures, were investigated using a two-step HTS assay. The optimized conditions were validated at the flask scale, which confirmed a significant enhancement in the biomass and lipid productivity of each isolate. Moreover, the two-step HTS assay notably enhanced economic and temporal efficiency compared to conventional flask-based optimization.ConclusionsThese results suggest that our two-step HTS assay is an efficient strategy for investigating and optimizing microalgal culture conditions to maximize biomass and lipid productivity. This approach has the potential to enhance the industrial applicability of microalgae and facilitate the seamless transition from laboratory to field applications.

Growth and Lipid Production of Ankistrodesmus Sp. IFRPD 1061 Under Mixotrophic Culture Condition: Effect of Sodium Acetate Concentration and Period Addition of Sodium Acetate in an Open Pond

AbstractMicroalgae with increased amount of biomass and lipid yield are crucial for biodiesel production. Mixotrophic cultivation has prominence for increasing the micro‐algal cell concentration and hence the volumetric productivity owing to independent utilization of both the photo‐assimilation of CO2 and oxidative assimilation of organic carbon sources. In this study, Ankistrodesmus sp. IFRPD 1061 was examined under various concentrations of sodium acetate for concentration and productivity of biomass and lipid, lipid contents (LCs), and fatty acid profiles. The optimum condition was obtained at Day 21 with 10 mM sodium acetate, which gave 6.940 ± 0.057 g L−1 biomass concentration, 327.619 ± 2.020 mg L−1 day−1 biomass productivity, 2.795 ± 0.191 g L−1 lipid concentration, 131.955 ± 9.275 mg L−1 day−1 lipid productivity, and 40.286 % ± 3.079 % w/w LC. The optimum condition (10 mM sodium acetate) in an open pond cultivation attained maximum values at Day 14, that is, 0.575 ± 0.004 g L−1 biomass concentration, 38.161 ± 0.076 mg L−1 day−1 biomass productivity, 0.203 ± 0.002 g L−1 lipid concentration, 13.440 ± 0.197 mg L−1 day−1 lipid productivity, and 35.219 % ± 0.585 % w/w LC. The lipids recovered from mixotrophic micro‐algae were primarily unsaturated fatty acids, which are appropriate to produce biodiesel. The results revealed that a 10 mM sodium acetate concentration can enhance lipid accumulation within algal cells.

Unraveling the Potential of Yarrowia lipolytica to Utilize Waste Motor Oil as a Carbon Source

This study evaluated the potential of Y. lipolytica (CBS 2075 and DSM 8218) to grow in waste motor oil (WMO) and produce valuable compounds, laying the foundation for a sustainable approach to WMO management. Firstly, yeast strains were screened for their growth on WMO (2–10 g·L−1) in microplate cultures. Despite limited growth, the CBS 2075 strain exhibited comparable growth to control conditions (without WMO), while DSM 8218 growth increased 2- and 3-fold at 5 g·L−1 and 10 g·L−1 WMO, respectively. The batch cultures in the bioreactor confirmed the best performance of DSM 8218. A two-stage fed-batch strategy–growth phase in aliphatic hydrocarbons, followed by the addition of WMO (one pulse of 5 g·L−1 or five pulses of 1 g·L−1 WMO), significantly increased biomass production and WMO assimilation by both strains. In experiments with five pulses, CBS 2075 and DSM 8218 strains reached high proteolytic activities (593–628 U·L−1) and accumulated high quantities of intracellular lipids (1.3–1.7 g·L−1). Yeast lipids, mainly composed of oleic and linoleic acids with an unsaturated/saturated fraction > 59%, meet the EU biodiesel standard EN 14214, making them suitable for biodiesel production.

Evaluating the Influence of Nutrient-Rich Substrates on the Growth and Waste Reduction Efficiency of Black Soldier Fly Larvae

Background: The black soldier fly (Hermetia illucens) has emerged as a promising tool in sustainable waste management, owing to its larvae’s ability to efficiently convert organic waste into valuable biomass. Objective: This study investigates the impact of various substrate compositions on the growth, waste reduction efficiency, and bioconversion rate of black soldier fly (BSF) larvae (Hermetia illucens). The aim is to optimize feeding strategies to enhance the effectiveness of BSF larvae in sustainable waste management and protein production. Methods: A controlled experiment was conducted over a 20-day period, using four different substrate types: 100% sludge, 75% sludge + 25% chicken feed, 25% sludge + 75% chicken feed, and 100% chicken feed. Each treatment had three replicates with 100 larvae each. Larval growth metrics, including weight and width, were recorded bi-daily. The waste reduction efficiency and bioconversion rate were calculated based on the remaining substrate weight and larval biomass, respectively. Elemental analysis was performed to determine the impact of substrate type on the accumulation of various elements in the larvae. Results: Significant differences were observed in larval growth, waste reduction efficiency, and bioconversion rates across the different substrates. The 100% chicken feed substrate led to the highest larval growth (M = 0.0881 g/day, SD = 0.0042) and bioconversion rate (M = 7.52%, SD = 0.34), while the 100% sludge substrate achieved the highest waste reduction rate (M = 86.2%, SD = 2.15). ANOVA tests indicated that substrate composition significantly affected these outcomes (p < 0.05). Elemental analysis showed substantial variations in the concentrations of calcium, cadmium, and nickel among the substrates, with the 100% sludge substrate having the highest nickel accumulation (M = 0.2763 ppm, SD = 0.023), significantly different from the other treatments (p < 0.001). Conclusions: The results demonstrate that substrate composition is crucial for optimizing BSF larvae growth and waste reduction efficiency. Nutrient-rich substrates, such as chicken feed, significantly enhance bioconversion rates and larval biomass production, although careful consideration of elemental accumulation, especially heavy metals, is essential for safe application in animal feed.

Biomass Production and Nutritional Sustainability in Different Species of African Mahogany

Biomass Production and Nutritional Sustainability in Different Species of African Mahogany

The bioenergetic cost of building a metazoan

All life forms depend on the conversion of energy into biomass used in growth and reproduction. For unicellular heterotrophs, the energetic cost associated with building a cell scales slightly sublinearly with cell weight. However, observations on multiple Daphnia species and numerous other metazoans suggest that although a similar size-specific scaling is retained in multicellular heterotrophs, there is a quantum leap in the energy required to build a replacement soma, presumably owing to the added investment in nonproductive features such as cell adhesion, support tissue, and intercellular communication and transport. Thus, any context-dependent ecological advantages that accompany the evolution of multicellularity come at a high baseline bioenergetic cost. At the phylogenetic level, for both unicellular and multicellular eukaryotes, the energetic expense per unit biomass produced declines with increasing adult size of a species, but there is a countergradient scaling within the developmental trajectories of individual metazoan species, with the cost of biomass production increasing with size. Translation of the results into the universal currency of adenosine triphosphate (ATP) hydrolyses provides insight into the demands on the electron-transport/ATP-synthase machinery per organism and on the minimum doubling times for biomass production imposed by the costs of duplicating the energy-producing infrastructure.

Photosystem rearrangements, photosynthetic efficiency, and plant growth in far red-enriched light.

Arabidopsis plants were grown in white light (400-700 nm) or in white light supplemented with far-red (FR) light peaking at 730 nm. FR-enriched light induced the typical shade avoidance syndrome characterized by enhanced length of seedling hypocotyl and leaf petiole. FR supplementation also caused a noticeable decrease in the carotenoid and chlorophyll content that was attributable to a block of pigment accumulation during plant development. The carotenoid decrease resulted from a downregulation of their biosynthesis pathway rather than carotenoid degradation. The losses of photosynthetic pigments are part of structural and functional rearrangements of the photosynthetic apparatus. The plastoquinone pool was chronically more oxidized in plants acclimated to white + FR light compared to white light-grown plants. Growth in FR-enriched light was associated with a higher photochemical efficiency of PSII compared to growth in white light and with a substantial increase in root and shoot biomass production. Light distribution between the photosystems was modified in favor of PSII by an increase in the PSII/PSI ratio and an inhibition of state transitions. Neither LHCII abundance nor nonphotochemical energy dissipation in the PSII chlorophyll antennae were modified significantly by the addition of FR light. A PSI supercomplex, not previously observed in Arabidopsis, was specifically found in plants grown in FR-enriched light. This large PSI complex contains a supplementary Lhca1-4 dimer, leading to a total of 6 LHCI antennae instead of 4 in the canonical PSI. Through those photosystem rearrangements and the synergistic interaction with white light, FR light is photosynthetically active and can boost photosynthesis and plant growth.

Nannochloropsis oceanica as a Source of Bioactive Compounds: Mapping the Effects of Cultivation Conditions on Biomass Productivity and Composition Using Response Surface Methodology

Microalga Nannochloropsis oceanica presents a promising source of high-value food ingredients such as protein, omega-3 fatty acids, and vitamins. To fully unlock its potential, a thorough understanding of how cultivation conditions affect both growth and the nutritional composition is required. Hence, this study aimed to test and model the effects of temperature, light intensity, and salinity on biomass productivity and the final contents of protein, eicosapentaenoic acid (EPA), and vitamin K2 using response surface methodology (RSM). The RSM experiment revealed that the highest temperature and light intensity tested favored biomass productivity and protein content. According to the generated models, the two responses peaked with 0.135 g DM·L−1·day−1 and 0.559 g·g−1 DM, respectively, at 27 °C and 300–350 µmol·m−2·s−1. In contrast, the contents of both EPA and menaquinone-4 (MK-4), the only detected K vitamer, were stimulated at the lowest tested temperature. Based on the generated models, the two responses peaked with 0.037 g·g−1 DM and 89.3 µg·g−1 DM, respectively, at 19 °C combined with 3.0% salinity (EPA) or 120 µmol·m−2·s−1 (MK-4). Although additional optima may exist beyond the tested conditions, these findings provide valuable information on N. oceanica’s cellular response to changes in key cultivation conditions. Furthermore, it shows that two-stage cultivation may be needed to fully unlock the potential of this microalga as a future source of valuable lipid ingredients.

Selection for agronomic traits in intermediate wheatgrass increases responsiveness to arbuscular mycorrhizal fungi

Societal Impact StatementAgricultural practices have had a negative impact on the physical, chemical, and biological components of soil. Perennial cropping systems that facilitate positive soil microbial interactions could not only rebuild soils but also sustain productivity through expected variations in environmental conditions. Here, we show the presence of arbuscular mycorrhizal (AM) fungi, soil symbionts that can improve host performance and soil health, increased the growth of intermediate wheatgrass, a novel perennial grain crop, in populations that have been increasingly bred for desirable agricultural characteristics. The right pairing of intermediate wheatgrass and a beneficial AM fungal community could lead to more sustainable agroecosystems.Summary Intermediate wheatgrass (IWG) is a novel perennial grain that can provide many soil health benefits in agroecosystems; however, little is known about how selection for agronomic traits has impacted interactions with soil biota. Here, we assess how the selection for agronomic traits in IWG has impacted its relationship with arbuscular mycorrhizal (AM) fungi. First, growth response to AM fungi was compared across five generations of IWG with varying degrees of selection. Second, variation in AM fungal responsiveness was compared among genets of IWG individuals within a more advanced generation. Finally, a meta‐analysis was performed on all published studies exploring AM fungal inocula effects on IWG performance to increase understanding of selection effects. AM fungal responsiveness increased with selection for agronomic traits, responsiveness varied among genets in the advanced generation, and a majority of genets performed better in the presence of AM fungi. The meta‐analysis supported the findings that AM fungal responsiveness has increased with selection in IWG. Further studies are needed to realize the combined potential soil health and sustainability benefits of IWG and AM fungi, including assessment of symbiotic benefits beyond biomass production, identification of IWG traits correlated with responsiveness, and characterization of AM fungal community response to IWG.

Molecular cloning and characterization of a brassinosteriod biosynthesis-related gene PtoCYP90D1 from Populus tomentosa

Brassinosteroids (BRs), one of the major classes of phytohormones are essential for various processes of plant growth, development, and adaptations to biotic and abiotic stresses. In Arabidopsis, AtCYP90D1 acts as a bifunctional cytochrome P450 monooxygenase, catalyzing C-23 hydroxylation in the brassinolide biosynthetic pathway. The present study reports the functional characterizations of PtoCYP90D1, one of the AtCYP90D1 homologous genes from Populus tomentosa. The qRT-PCR analysis showed that PtoCYP90D1 was highly expressed in roots and old leaves. Overexpression of PtoCYP90D1 (PtoCYP90D1-OE) in poplar promoted growth and biomass yield, as well as increased xylem area and cell layers. Transgenic plants exhibited a significant increase in plant height and stem diameter as compared to the wild type. In contrast, the CRISPR/Cas9-generated mutation of PtoCYP90D1 (PtoCYP90D1-KO) resulted in significantly decreased biomass production in transgenic plants. Further studies revealed that cell wall components increased significantly in PtoCYP90D1-OE lines but not in PtoCYP90D1-KO lines, as compared to wild-type plants. Overall, the findings indicate a positive role of PtoCYP90D1 in improving growth rate and elevating biomass production in poplar, which will have positive implications for its versatile industrial or agricultural applications.

Influence of Silicate Concentrations on Growth, Carotenoid, and Fatty Acid Profiles of the Marine Diatom Conticribra weissflogii

Enhancing microalgal growth and bioactive compound production is becoming a duty for improving photosynthetic microorganisms. In this study, the growth, carotenoid, and fatty acid profiles of Conticribra weissflogii were studied under four different silicate concentrations and silicate-deficient conditions in an f/2 medium with continuous aeration, light intensity (30 ± 2 µmol m−2 s−1), salinity (25 ± 2‰), pH (8), and temperature (25 ± 2 °C). At the end of the experiment, we observed that a silicate concentration of 120 mg L−1 produced the maximum biomass dry weight (0.86 g L−1), carotenoid content (1.63 µg mL−1), and fucoxanthin content (1.23 mg g−1) in C. weissflogii. The eicosapentaenoic acid (EPA) (11,354.37 µg g−1), docosahexaenoic acid (DHA) (2516.16 µg g−1), gamma-linolenic acid (C18:3n6) (533.51 µg g−1), and arachidonic acid (C20:4n6) (1261.83 µg g−1) contents were significantly higher at Si 120 mg L−1. The results further showed the maximum fatty acid content in C. weissflogii at Si 120 mg L−1. However, the silicate-deficient conditions (Si 0 mg L−1) resulted in higher levels of saturated fatty acids (38,038.62 µg g−1). This study presents a practical approach for the large-scale optimization of biomass, carotenoid, fucoxanthin, and fatty acid production in C. weissflogii for commercial purposes.

Plant phenology predicts the stability of primary production in three ecosystems of the northern Chihuahuan Desert

Abstract The temporal stability of plant productivity affects species' access to resources, exposure to stressors and strength of interactions with other species in the community, including support to the food web. The magnitude of temporal stability depends on how a species allocates resources among tissues and across phenological stages, such as vegetative growth versus reproduction. Understanding how plant phenological traits correlate with the long‐term stability of plant biomass is particularly important in highly variable ecosystems, such as drylands. We evaluated whether phenological traits predict the temporal stability of plant species productivity by correlating 18 years of monthly phenology observations with biannual estimates of above‐ground plant biomass for 98 plant species from semi‐arid drylands. We then paired these phenological traits with potential climate drivers to identify abiotic contexts that favour specific phenological strategies among plant species. Phenological traits predicted the stability of plant species above‐ground biomass. Plant species with longer vegetative phenophases not only had more stable biomass production over time but also failed to fruit in a greater proportion of years, indicating a growth–reproduction trade‐off. Earlier leaf‐out dates, longer fruiting duration and longer time lags between leaf and fruit production also predicted greater temporal stability. Species with stability‐promoting traits began greening in drier conditions than their unstable counterparts and experienced unexpectedly greater exposure to climate stress, indicated by the wider range of temperatures and precipitation experienced during biologically active periods. Our results suggest that bet‐hedging strategies that spread resource acquisition and reproduction over long time periods help to stabilize plant species productivity in variable environments, such as drylands. Read the free Plain Language Summary for this article on the Journal blog.

Biomass yield potential, feedstock quality, and nutrient removal of perennial buffer strips under continuous zero fertilizer application

Abstract. Perennial-based buffer strips have been promoted as having the potential for improving ecosystem services from riparian areas while producing biomass as livestock feed or as a bioenergy feedstock. Both biomass production and nutrient removal of buffer strips are substantially influenced by the vegetation types for the multipurpose perennial buffers. In this 2016–2019 study in western Illinois, two perennial cropping systems, including forage crops composed of cool-season grass mixtures (forage system) and bioenergy crops made up of warm-season grass mixtures (bioenergy system), were used to establish buffer strips for assessing biomass production, feedstock quality, nutrient removal, and buffer longevity. Treatments for this study reflecting agronomic practices included (1) two harvests occurring in summer (at anthesis) and fall (after complete senescence) and (2) one harvest in fall for the forage system (two-cut vs. one-cut forage) and (3) one fall harvest for the bioenergy system (one-cut bioenergy). Successively harvesting without any fertilizer input resulted in a yield decline in forage biomass over 3 years by approximately 30 % (6.3 to 4.4 Mg DM ha−1 (dry matter) with a rate of 1.0 Mg ha−1 yr−1) in the two-cut forage and by 35 % (4.9 to 3.2 Mg DM ha−1 with a rate of 0.9 Mg ha−1 yr−1) in the one-cut forage systems. The feed quality also decreased over the years by showing declined rates of 12.9 (crucial protein), 0.9 (calcium), 0.7 (copper), and 1.3 g kg−1 DM yr−1 (zinc). Empirical models predicted enteric CH4 emissions from cattle ranged from 225.7 to 242.6 g per cow per day based on the feed nutritive values. In contrast, bioenergy biomass yield increased by 27 % from 4.9 to 6.7 Mg DM ha−1 with a consistent quality (cellulose of ∼ 397.9 g kg−1; hemicellulose of ∼ 299.4 g kg−1), corresponding to the increased total theoretical ethanol yield from 1.8 × 103 to 2.4 × 103 L ha−1 (∼ 33 % increase). Annual nutrient removals of N, P, K, Ca, and Mg were significantly higher in the forage systems (e.g., two-cut: 52.6–106.9 kg N ha−1; one-cut: 44.5–84.1 kg N ha−1) than those in the bioenergy system (e.g., 25.9–34.4 kg N ha−1); however, the removal rate declined rapidly over 3 years (e.g., ∼ 49 % reduction) as the annual biomass yield declined in the forage systems. This on-farm field study demonstrated the potential of the perennial crop used as buffer strip options for biomass production and buffer sustainability at the edge of the field.

Ecological Assessment of Phytoplankton Diversity and Water Quality to Ensure the Sustainability of the Ecosystem in Lake Maybalyk, Astana, Kazakhstan

Microalgae in planktonic communities are the main producers of biomass in lake ecosystems; however, their stability is influenced by many environmental factors. This study aims to assess the ecological state of Lake Maybalyk, located in Astana (Kazakhstan), based on the study of the taxonomic diversity and structure of phytoplankton, zooplankton, and the physico-chemical properties of the water. From 2019 to 2021, samples were taken for phytoplankton analysis, hydrochemical analysis of the water, zooplankton, and saprobiological analysis of the algocenosis. The study also investigated the main morphometric parameters of the lake, as well as the composition of hydrobionts, such as zooplankton, zoobenthos, and ichthyofauna. The analysis of phytoplankton revealed the presence of 97 species and intraspecific taxa of microalgae, with 71 types of microalgal indicators indicating water saprobity. The planktonic algoflora in Lake Maybalyk is predominantly composed of diatoms (Bacillariophyta) and green algae (Chlorophyta), which play a vital role in oxygen production and the food chain within the reservoir. Based on the Pantle–Buck saprobity index (2.15–2.5), the water quality in Lake Maybalyk is classified as moderately polluted. The assessment of the water quality, considering the number and composition of indicator phytoplankton species, places Lake Maybalyk in class III (β-mesosaprobic). The hydrochemical indicators align with the hydrobiological indicators, confirming the water quality as class III. The trophic status of the reservoir, during the study period, can be described as average. The obtained data on both the hydrobiological and hydrochemical indicators correlate, suggesting satisfactory water quality and the ability of the reservoir to purify itself. This study contributes to the sustainable management of water resources, by providing essential data on the ecological state of Lake Maybalyk. The results underscore the importance of continuous biomonitoring, with microalgae as indicators of water quality, which is crucial for developing effective ecosystem conservation strategies.

Exploring Aspergillus biomass for fast and effective Direct Black 22-dye removal

Azo dyes are widely used in the textile industry due to their stability and resistance. These properties also make them recalcitrant xenobiotics, toxic, mutagenic, and carcinogenic, even at low concentrations. Considered emerging pollutants, there is an urgency to address mechanisms capable of remediating these contaminants, with Aspergillus fungi standing out as an effective solution. Fifteen strains of Aspergillus were investigated for the decolorization of the tetra azo dye Direct Black 22. The influence of different culture media was evaluated on fungi biomass production, dye concentrations (50–300 mg/L), biomass concentrations (1–5g), and the reuse of biomass in continuous batches. The strains that stood out the most were Aspergillus japonicus URM 5620, Aspergillus niger URM 5741, and A. niger URM 5838. Obtaining biomass in less nutrient-rich medium favored decolorization by forming more organized pellets. The live biomass of these fungi was 59% more efficient than the dead biomass. The decolorization efficiency was not affected at lower dye concentrations, showing a decrease in decolorization only when the concentration reached 300 mg/L. Increasing the amount of biomass resulted in proportionally greater decolorization. Even with just 1 g of biomass, the three fungi could remove more than 90% of the dye in less than 60 minutes, and with 5 g, the dye was completely removed in 10 minutes. Thebiomass was reused in three consecutive decolorization cycles, and the fungus that best withstood the cycles was A. niger URM 5741. These results demonstrate the potential of the genus Aspergillus fungi tested in this study as sustainable and efficient biosorbents for the remediation of azo dyes such as Direct Black 22, with potential for colored industrial effluent treatment.

In situ bioaugmented phytoremediation of cadmium and crude oil co-contaminated soil by Ocimum gratissimum in association with PGPR Micrococcus luteus WN01

Heavy metals and petroleum oil are the two most important contaminants in the environment. Currently, phytoremediation is regarded as an effective and affordable solution that allows the attenuation of toxic pollutants through the use of plants. Not many studies are carried out regarding the use of aromatic plants capable of remediating soil that is co-contaminated by heavy metal and petroleum hydrocarbons. A pot experiment was conducted to investigate the influence of cadmium-resistant PGPR Micrococcus luteus on the phytoremediation efficiency of Ocimum gratissimum in Cd and petroleum co-contaminated soil. The plants were harvested after 60 days of treatment and their growth and biomass were determined. The accumulation of Cd in plant shoots and roots was determined. The residual petroleum hydrocarbon concentration during the 60 days of the phytoremediation experiment was determined using GC-FID. O. gratissimum with M. luteus showed the highest Cd accumulation (14.05 mg kg−1) and the highest reduction of TPH (46.64%). M. luteus ameliorated contaminant toxicity and promoted biomass production of O. gratissimum. These results demonstrated that O. gratissimum in combination with M. luteus can be efficiently used to remediate Cd and petroleum-co-contaminated soils.

Trade-Off Between Growth Regimes in Chlorella vulgaris: Impact on Carotenoid Production

With the increasing awareness of socio-environmental issues, a global trend has emerged emphasizing the valorization of natural ingredients that promote health and well-being within sustainable production systems, such as microalgae-based carotenoids. Currently, little is understood about the correlation between biomass productivity and carotenoid content, which is a fundamental parameter for facilitating the immediate expansion of microalgae bioprocesses and ensuring the availability and industrial viability of these compounds. In this context, this study aims to investigate the carotenoid profile of Chlorella vulgaris through growth curve experiments conducted under photoautotrophic and heterotrophic regimes. Additionally, a trade-off analysis was performed for the production of carotenoids from microalgae. Carotenoids were quantified using high-performance liquid chromatography coupled with diode array and mass spectrometry detectors (HPLC-PDA-MS/MS). The performance of kinetic phases and energy demands across growth regimes was assessed to provide insights into production trade-offs. The results indicated that a total of 22 different carotenoids were identified in all the extracts. The all-trans-lutein and all-trans-β-carotene were the majority compounds. The total carotenoid content of Chlorella vulgaris revealed significant differences in the kinetic phases of carotenoid production, indicating that carotenoid volumetric production is only viable if the cultures are conducted until the log and stationary phases, based on the function of the biomass volumetric production (weight.volume−1). Therefore, the best trade-off for the process was to provide photoautotrophic growth until the exponential phase (log). Under this condition, the maximum carotenoid and lutein content was 2921.70 µg.L−1, reaching a maximum cell biomass of 1.46 g.L−1. From an environmental/economic point of view, the energy demand was 7.74 kWh.L−1. Finally, the scientific advances achieved in this study provide a holistic view of the influence of the main cultivation methods on the production of microalgae carotenoids, suggesting a viable initial direction for different industrial applications.

Production of Sorghum Seed and Straw Biomass for Feed as Affected by Different Harvesting Ages

This study evaluated the sorghum “Samurai Two” production for feed harvested at different times after planting during the rainy season. A randomized block design was employed with five groups and five treatments representing different harvesting ages: 90, 95, 100, 105, and 110 days after planting. The variables measured included panicle length, weight, dry weight, seed dry weight per panicle, 1000-seed weight, number of seeds, dry seed production, total fresh and dry weight of panicles, moisture content, and total fresh and dry weight of straw biomass. Harvesting between 90 and 100 DAP resulted in a higher fresh and dry panicle weight, fresh and dry biomass, seed dry weight per panicle, 1000-seed weight, and dry seed production. The optimal seed production for “Samurai Two” occurred at 90 DAP during the rainy season. Conversely, harvesting at 95 DAP significantly increased straw biomass's total fresh and dry weight, with this age being optimal for straw biomass production.

Vascular bundle cell-specific expression of a phosphate transporter improves phosphate use efficiency of transgenic Arabidopsis without detrimental effects

Constitutive overexpression of phosphate (Pi) transporter family 1 often results in the accumulation of toxic levels of Pi, which causes growth retardation in plants. In contrast, we had previously reported that root epidermis-specific overexpression of the phosphate transporter TaPT2 in Arabidopsis leads to improved growth and Pi use efficiency. In the present study, we used promoters AtHKT1;1 and SKOR, which are predominantly expressed in the vascular bundle tissues, to overexpress TaPT2. Transgenic lines exhibited increased shoot growth compared to wild type plants under normal- and low-Pi conditions, along with elevated root Pi and total P content, and higher xylem sap Pi concentration, specifically under low-Pi conditions. This was attributed to moderate Pi accumulation in the xylem parenchyma cells, enhancing the Pi uploading capacity to the xylem. SKOR-TaPT2, however, did not complement pho1 mutant, which was defective in uploading Pi to the xylem. The transcriptional levels of VPT1 and VPT3, which are responsible for transporting excess Pi into a vacuole, were upregulated in SKOR promoter lines under normal-Pi conditions. Our results suggested that root vascular bundle-specific expression of TaPT2 is another promising strategy for increasing biomass production, Pi uptake, and Pi use efficiency while preventing growth retardation in transgenic plants.

Identification of Land and Potential Production of Willow Biomass Crops Using a Multi-Criteria Land Suitability Assessment

The New York State (NYS) Climate Act aims for net-zero emissions across all economic sectors by 2050, with renewable biofuels playing a key role in this transition. Approximately half of the biomass required for these biofuels is expected to come from purpose-grown sources like willow. To address this demand, we assessed land availability and biomass production potential for willow using a GIS-based fuzzy logic Land Suitability Assessment (LSA) model under three land scenarios: (1) including all cropland, (2) excluding conventional crops, and (3) excluding any cropland. Our findings show that NYS has the potential for between 1.07 and 1.59 million ha for willow cultivation, capable of producing 14.0 to 20.6 million dry Mg of biomass annually. Grassland/pasture accounts for 32–51%, and herbaceous cover for 32–48% of the potential areas. Between 33% and 53% of the area identified was in parcels that were 2–20 ha in size. These results highlight the considerable potential for purpose-grown biomass in NYS, supporting the state’s decarbonization goals and renewable energy transition.