Potential Biomass Research Articles

Capturing woody aboveground biomass historical change and potential under climate change using Landsat time-series for afforestation in dryland of China

Capturing long-term dynamics and the potential under climate change of woody aboveground biomass (AGB) is imperative for calculating and raising carbon sequestration of afforestation in dryland. It is always been a great challenge to accurately capture AGB dynamics of sparse woody vegetation mixed with grassland using only Landsat time-series, resulting in changing trajectory of woody AGB estimates cannot accurately reflect woody vegetation growth regularity in dryland. In this study, surface reflectance (SR) sensitive to woody AGB was firstly selected and interannual time-series of composited SR was smoothed using S-G filter for each pixel, and then optimal machine learning algorithm was selected to estimate woody AGB time-series. Pixels that have reached AGB potential were detected based on the AGB changing trajectory, and the potential was spatial-temporal extended using random forest model combining environmental variables under current climate condition and CMIP6 climate models. Results show that: 1) minimum value composite based on NIRv during Jul.-Sep. is more capable of explaining woody AGB variation in dryland (R = 0.87, p < 0.01), and Random Forest (RF) model has the best performance in estimating woody AGB (R2 = 0.75, RMSE = 4.74 t·ha−1) among sis commonly used machine learning models. 2) Annual woody AGB estimates can be perfectly fitted with a logistic growth curve (R2 = 0.97, p < 0.001) indicating explicit growth regularity of woody vegetation, which provides physiological foundation for determining woody AGB potential. 3) Woody AGB potential can be accurately simulated by RF combining environmental variables (R2 = 0.95, RMSE = 2.89 t·ha−1), and current woody AGB still has a potential of small increase, whereas the overall losses of woody AGB potential were observed in 2030, 2040 and 2050 under CMIP6 SSP-RCP scenarios.

Evaluation of brown midrib (bmr) sorghum stover as potential renewable biomass feedstock for poly(3-hydroxybutyrate) production employing Paraburkholderia Sacchari and Cupriavidus necator

Evaluation of brown midrib (bmr) sorghum stover as potential renewable biomass feedstock for poly(3-hydroxybutyrate) production employing Paraburkholderia Sacchari and Cupriavidus necator

Advancements in the green synthesis of carbon dots for sustainable development

The use of various biomass derivatives and wastes to produce carbon dots (CDs) represents a green synthesis approach that holds great potential for commercialization by offering economically viable, abundant, and sustainable resources. The process is reliable and reproducible by producing high-quality CDs with controllable size and surface structure, high photoluminescence (PL), and narrow emission. This review highlights the potential of biomass wastes and derivatives as a valuable resource for the production of CDs, showcasing their economic viability and environmental sustainability. The discussion is focusing on optimizing the green synthesis of CDs from different biomass precursors, including small molecules (e.g., sugars, polymers, amino acids, proteins, etc.) and biomass wastes (e.g., leaves, stem, root, flower, pollen, etc.), elucidating the underlying synthetic mechanisms, and exploring various modification techniques. The pursuit of high-quality CDs materials is also realized through innovative modification strategies, such as surface passivation, precise morphology and size control, and heteroatom doping, which enable tailoring the properties of CDs according to specific requirements while minimizing waste generation. The formation mechanism and tuning of optical properties were also discussed in detail, focusing on the comparison with CDs using other precursors. We further introduced the sustainable applications of these green CDs on renewable energies, such as photocatalysis, electrocatalysis, supercapacitors, lithium-ion batteries, and photovoltaics. Finally, this review provides a perspective on the challenges, potential advancements and future directions in the field of the green CDs.

Multicriteria GIS-based assessment of biomass energy and hydropower potentials in Nigeria

The deployment of hybrid renewable energy systems remains the quickest way to salvage the dwindling grid supply in Nigeria and improve energy access. The assessment of biomass and hydro potentials across the geopolitical zones of the country to determine the optimal locations for a Biogas fired thermal plant for energy generation is thoroughly addressed in this paper. Multiple Geographical Information System (GIS) approaches were used to assess the energy potentials of crop and forest residues for biomass, as well as waterbodies, and waterlines for a hydrothermal power plant. The study applies the inverse distance weighting and weighted overlay multicriteria decision analysis. Forest areas, waterbodies, distance from water sources and road accessibility were considered for locating the biomass and hydrothermal facilities within multiple ring buffer distances of 200 m–2000 m from the combined biomass and hydropower resources. The result shows four states with potentials to host biomass-hydrothermal power plants in Nigeria; Niger, Kaduna, Bauchi and Taraba states with biomass potentials of 831.9 tonnes/yr, 1173.27 tonnes/yr, 322 tonnes/yr and 739.48 tonnes/yr, respectively and inland waterways. It further shows that these plants can be optimally located within 2000 m from the source of the biomass and hydro resources. This paper recommends the utilization of these results to carry out feasibility studies and make informed decisions on the exploration of these resources for power generation. It also advocates for a control in the commercialization of forest residues to sustain the production from these hybrid plants and supports the Nigerian bio-energy policy that proposes to effectively utilize the Nigeria's non-fuelwood as substitute to felling of trees.

Preparation and Compositional Analysis of Lignocellulosic Plant Biomass as a Precursor for Food Production During Food Crises.

In the event of a sunlight-blocking, temperature-lowering global catastrophe, such as a global nuclear war, super-volcano eruption or large asteroid strike, normal agricultural practices would be severely disrupted with a devastating impact on the global food supply. Despite the improbability of such an occurrence, it is prudent to consider how to sustain the surviving population following a global catastrophe until normal weather and climate patterns resume. Additionally, the ongoing challenges posed by climate change, droughts, flooding, soil salinization, and famine highlight the importance of developing food systems with resilient inputs such as lignocellulosic biomass. With its high proportion of cellulose, the abundant lignocellulosic biomass found across the Earth's land surfaces could be a source of energy and nutrition, but it would first need to be converted into foods. To understand the potential of lignocellulosic biomass to provide energy and nutrition to humans in post-catastrophic and other food crisis scenarios, compositional analyses should be completed to gauge the amount of energy (soluble sugars) and other macronutrients (protein and lipids) that might be available and the level of difficulty in extracting them. Suitable preparation of the lignocellulosic biomass is critical to achieve consistent and comparable results from these analyses. Here we describe a compilation of protocols to prepare lignocellulosic biomass and analyze its composition to understand its potential as a precursor to produce post-catastrophic foods which are those that could be foraged, grown, or produced under the new climate conditions to supplement reduced availability of traditional foods. These foods have sometimes been referred to in the literature as emergency, alternate, or resilient foods. © 2024 The Authors. Current Protocols published by Wiley Periodicals LLC. Basic Protocol 1: Convection oven drying (1 to 2 days) Alternate Protocol 1: Air-drying (2 to 3 days) Alternate Protocol 2: Lyophilization (1 to 4 days) Support Protocol 1: Milling plant biomass Support Protocol 2: Measuring moisture content Basic Protocol 2: Cellulose determination Basic Protocol 3: Lignin determination Basic Protocol 4: Crude protein content by total nitrogen Basic Protocol 5: Crude fat determination via soxtec extraction system Basic Protocol 6: Sugars by HPLC Basic Protocol 7: Ash content.

Kelp forest community structure and demography in Kongsfjorden (Svalbard) across 25 years of Arctic warming.

The Arctic archipelago of Svalbard is a hotspot of global warming and many fjords experience a continuous increase in seawater temperature and glacial melt while sea-ice cover declines. In 1996/1998, 2012-2014, and 2021 macroalgal biomass and species diversity were quantified at the study site Hansneset, Kongsfjorden (W-Spitsbergen) in order to identify potential changes over time. In 2021, we repeated the earlier studies by stratified random sampling (1 × 1 m2, n = 3) along a sublittoral depth transect (0, 2.5, 5, 10, and 15 m) and investigated the lower depth limits of dominant brown algae between 3 and 19 m. The maximum fresh weight (FW) of all seaweeds was 11.5 kg m-2 at 2.5 m and to 99.9% constituted of kelp. Although biomass distribution along the depth transect in 2021 was not significantly different compared to 2012/2013, the digitate kelp community (Laminaria digitata/Hedophyllum nigripes) had transformed into an Alaria esculenta-dominated kelp forest. Consequently, a pronounced shift in kelp forest structure occurred over time as we demonstrate that biomass allocation to thallus parts is kelp species-specific. Over the past decade, kelp demography changed and in 2021 a balanced age structure of kelps (juveniles plus many older kelp individuals) was only apparent at 2.5 m. In addition, the abundances and lower depth limits of all dominant brown algae declined noticeably over the last 25 years while the red algal flora abundance remained unchanged at depth. We propose that the major factor driving the observed changes in the macroalgal community are alterations in underwater light climate, as insitu data showed increasing turbidity and decreasing irradiance since 2012 and 2017, respectively. As a consequence, the interplay between kelp forest retreat to lower depth levels caused by coastal darkening and potential macroalgal biomass gain with increasing temperatures will possibly intensify in the future with unforeseen consequences for melting Arctic coasts and fjord ecosystem services.

The influence of regional industrial structure on the suitability of biomass energy development: A case study of 30 counties and cities in a cold region of China

The development of the biomass economy contributes to economic growth and social development. The study of biomass energy economy from the perspective of industrial structure type has the significance of promoting the optimization and upgrading of industrial structure, promoting the development of green industry and other aspects. It helps to promote the sustainable development of the economy and society. And industrial structure is a major component of the socio-economic system. Therefore, it is necessary to study the impact of material energy supply and demand from the perspective of regional industrial structure type. The objective of this study is to explore the relationship between the type of industrial structure and the development of biomass energy from the perspective of the economic direction, so as to fill the gap in this research perspective. Based on the three major industries generally regarded to constitute GDP - agriculture, industry, and service - the regression results of STATA software were used to calculate biomass potential according to crop distribution status. Using the ArcGIS analysis tool, the biomass break-even model related to resource supply-demand has been used to obtain the break-even status of the research area under six industrial structures in the past 20 years. According to research results, the break-even degree of biomass energy supply is between 0.109 and 1.236 when the industrial structure types of counties and cities are service-agriculture-industry and industry-agriculture-service. This is suitable for biomass energy development. When the industrial structure type of counties and cities is service-industry-agriculture, the break-even degree of biomass energy supply is between -0.428 and 0.277, which is not suitable for biomass energy development.

Unlocking the potential of Algerian lignocellulosic biomass: exploring indigenous microbial diversity for enhanced enzyme and sugar production.

Nowadays, natural resources like lignocellulosic biomass are gaining more and more attention. This study was conducted to analyse chemical composition of dried and ground samples (500μm) of various Algerian bioresources including alfa stems (AS), dry palms (DP), olive pomace (OP), pinecones (PC), and tomato waste (TW). AS exhibited the lowest lignin content (3.60 ± 0.60%), but the highest cellulose (58.30 ± 2.06%), and hemicellulose (20.00 ± 3.07%) levels. DP, OP, and PC had around 30% cellulose, and 10% hemicellulose. OP had the highest lignin content (29.00 ± 6.40%), while TW contained (15.70 ± 2.67% cellulose, 13.70 ± 0.002% hemicellulose, and 17.90 ± 4.00% lignin). Among 91 isolated microorganisms, nine were selected for cellulase, xylanase, and/or laccase production. The ability of Bacillus mojavensis to produce laccase and cellulase, as well as B. safensis to produce cellulase and xylanase, is being reported for the first time. In submerged conditions, TW was the most suitable substrate for enzyme production. In this conditions, T. versicolor K1 was the only strain able to produce laccase (4,170 ± 556 U/L). Additionally, Coniocheata hoffmannii P4 exhibited the highest cellulase activity (907.62 ± 26.22 U/L), and B. mojavensis Y3 the highest xylanase activity (612.73 ± 12.73 U/L). T. versicolor K1 culture showed reducing sugars accumulation of 18.87% compared to initial concentrations. Sucrose was the predominant sugar detected by HPLC analysis (13.44 ± 0.02g/L). Our findings suggest that T. versicolor K1 holds promise for laccase production, while TW represents a suitable substrate for sucrose production.

Impact of electrolyte concentration on electrochemical performance of Cocos nucifera Waste-Derived High-Surface carbon for green energy storage

The increasing popularity of utilizing biomass's natural structure represents a promising avenue for sustainable innovation, as it taps into the inherent characteristics of organic materials to address various environmental and industrial challenges. Researchers and industries continue to explore the full potential of biomass in creating more sustainable and efficient solutions. The transformation of biomass into carbon materials is an indirect means of utilizing CO2 as a carbon source, thus contributing to the sustainable development of energy storage technologies and also in pollution reduction. In the quest for sustainable energy solutions, this research unveils a cost-effective approach to supercapacitor development by harnessing the untapped potential of Cocos nucifera trunk sawdust-derived high-surface carbon (CHSC). Through a meticulous process involving ZnCl2 treatment and KOH activation at varying temperatures, CHSC-700 emerges as a standout electrode material with exceptional structural characteristics, boasting enhanced graphitization and a specific surface area of 1153.72 m2/g. Further, the study delved into the nuanced relationship between electrolyte concentration and supercapacitor performance, pinpointing 6 M KOH as the optimal condition. In 6 M KOH, the electrode exhibits a maximum specific capacitance of 559.27F/g at the current density of 0.5 A/g with outstanding cyclic stability, retaining 80.37 % capacitance after 20,000 cycles and an impressive energy density of 18.92 Wh/kg and power density of 246.75 W/kg. This systematic exploration provides valuable data for understanding the biomass-derived carbon electrode's behaviour under various electrolyte concentrations, offering crucial information for optimizing its performance in practical applications, such as energy storage devices.

Navigating bioenergy horizons: a critical examination of Europe’s potential, with Belgium as a case study

Estimates of the energy potential of the different energy sources are essential for modelling energy systems. However, the potential of biomass is debatable due to the numerous dimensions and assumptions embedded. It is thus important to investigate further the final potential to understand their implications. Therefore, this study analyses European studies assessing biomass potential and proposes a critical discussion on the different results to converge to a realistic range of potentials for 2030. Biomass is divided into four categories: forestry products, agricultural residues, energy crops and other waste, each with sub-categories. Belgium is used as a case study to highlight the convergences and divergences of the studies. Having a national case study allows for more precise analyses through in-depth comparisons with national data and reports. The potential estimates are compared with the current production for each category in order to have a better view of the gap to be bridged. From these national perspectives, the European potential can be better apprehended. The results show that the realistic potentials for 2030 for Belgium and Europe are somewhat in the lower range of the estimates of the different studies: from 30 to 41 TWh and from 2000 to 2500 TWh, respectively. The forestry biomass is already well exploited with a slight potential increase, while the agricultural residues present the most significant potential increase. The realistic potential for energy crops in Belgium turned out to be close to the minimum estimates. Indeed, the implications of those crops are considerable regarding the agricultural structure and logistics. This article emphasises that no energy potential is neutral, as it involves a specific system in terms of agriculture, forestry or waste management, with broader social, economic or environmental implications. Consequently, using one estimate rather than another is not a trivial matter; it has an impact on the system being modelled from the outset.

A Comparative Analysis Assessing Growth Dynamics of Locally Isolated Chlorella sorokiniana and Chlorella vulgaris for Biomass and Lipid Production with Biodiesel Potential

Prior research has emphasized the potential of microalgae in biodiesel production, driven by their ability to replace fossil fuels. However, the significant costs associated with microalgae cultivation present a major obstacle to scaling up production. This study aims to develop an eco-friendly microalgae cultivation system by integrating carbon dioxide from flue gas emissions with an affordable photobioreactor, providing a sustainable biomass production. The research evaluates the growth performance of Chlorella sorokiniana and Chlorella vulgaris across this integrated system for biomass and lipid production. Results indicate substantial biomass yields of 1.97 and 1.84 g/L, with lipid contents of 35 % and 41 % for C. sorokiniana and C. vulgaris, respectively. The macrobubble photobioreactor demonstrates high potential for microalgae biomass and lipid production, yielding quality fatty acid methyl esters such as palmitic, linoleic and stearic. This study presents an environmentally friendly system for efficient microalgae cultivation, generating lipid-rich biomass suitable for biodiesel production.

Role of Biomass Gasification in Achieving Circular Economy

Growing awareness of environmental concerns and the prioritisation of environmental stewardship necessitates the incorporation of sustainability practices that are both economical and profitable. This involves transforming existing industrial practices from the ‘take-make-waste’ approach to one that aligns with the principles of a circular economy. This includes the use and restoration of bioreserves or the cycling of products in a manner that minimizes waste generation by employing the concepts of reuse and recycling. The adoption of circular economy principles is especially critical in energy-intensive industries, and there is increased attention to implementing these principles through biomass gasification. Various methodologies exist for utilizing the potential of biomass by employing biomass gasification to achieve the desired levels of energy output. Techniques incorporating circular economy principles for biomass gasification have become increasingly sought after and achieved widespread implementation in the past few decades. In this paper, we examine the principle of a circular economy and how biomass gasification can be leveraged in processes requiring high-energy input to achieve the same.

Purification and biochemical characterization of an ionic liquid tolerant cellulase from Aspergillus assiutensis VS34 for potential biomass conversion applications

Purification and biochemical characterization of an ionic liquid tolerant cellulase from Aspergillus assiutensis VS34 for potential biomass conversion applications

Wildfires and carbon budget of certain seasonally dry forests in India

AbstractGlobally, the increasing fire events in addition to climate change due to the emission of carbon dioxide (CO2) as well as other greenhouse gases exerts huge pressure on natural resources and their management. This phenomenon is more severe in the tropical region due to increasing population, urbanization, industrialization, existing pressures, and limiting conditions. In the present study, carbon (C) stock, carbon sequestration (Cseq), CO2 mitigation potential, C budget, and C flux of the seasonally dry forest ecosystem of Chhattisgarh under the influence of wildfire in the protected area and its proximity were evaluated. Four sites namely, high fire zone (HFZ), medium fire zone (MFZ), low fire zone (LFZ), and non‐fire zone (NFZ) were selected and marked based on fire return intervals (frequency) and extent of damage. The present work is a novel approach that assesses the impact of different fire frequencies on C dynamics of fire‐affected zones. The stratified sampling technique was used within a permanent plot of 1 hectare. Forest stands on each site were analyzed using 10 randomly placed quadrats (each 10 × 10 m in size) and data were collected from each site. Across the sites higher tree density was observed at NFZ and the lowest at HFZ.Total tree biomass ranged between 116.0 and 358.4 t ha−1 across the fire regimes. Total vegetation C stock ranged between 59.1 and 169.5 t ha−1 in different sites. The C mitigation and Cseq potential ranged between 186.2 and 575.3 t ha−1, and 7.1 and 15.9 t ha−1, respectively being highest in NFZ and lowest in HFZ. The species such as Anogeissus latifolia, Buchanania lanzan, Shorea robusta, Lannea coromandelica, Lagerstroemia parviflora, Ougeinia oojeinensis, Terminalia chebula, Terminalia tomentosa are the major contributor in biomass, C stock, C mitigation, and Cseq potential in different fire regimes. Thus, our findings would be highly useful in the restoration process of fire‐affected zones through the plantation of selective plant species. Therefore, the aforementioned species could be effectively utilized while going for an afforestation/reforestation program, and will be helpful in climate change adaptation and mitigation strategies under different fire zones.

Self-foaming calcium modified carbon foam derived from a liquefied product resin of tobacco stalks for the removal of Pb2+ in water

This study demonstrated a self-foaming plus in-situ modification strategy that led to an efficient and environmentally friendly carbon foam adsorbent for removal of Pb2+ from aqueous solution. Specifically, the resin derived from liquefied tobacco stalk (TSLPR resin) was used as the precursor of carbon foams. Various characterization techniques were employed to investigate the morphology, structure, surface area, pore size, and adsorption capacity of the materials. Upon carbonization of the resin foam at 800 ℃, considerable CaO and CaCO3 converted from Ca (NO3)2 were distributed on the surface of the cell wall, indicating the success of the in-situ modification. By using a carbon foam loaded with 7% calcium (Ca@CF-7) as an adsorbent for removal of Pb2+ at a pH of 4 and 25 ℃, the dynamic adsorption equilibrium was achieved within 480 minutes. The theoretical maximum adsorption capacity (qm) obtained by Sips model reached 348.8 mg·g−1, which is more than 4.5 times higher than the pristine carbon foam. The findings of this study indicated that the chemical co-precipitation of Pb3(CO3)2(OH)2 played a significant role for removal of Pb2+, which could be attributed to the surface alkaline environment provide by CaO and CaCO3. This study offers a novel approach for in-situ modification of carbon foam and also demonstrated the potential of the straw biomass with low lignin content in production of high-performance carbon adsorbents.

Coin‐Shaped Carbon Prepared with Cerbera manghas Fibers via Multistage Carbonization and Activation for High‐Performance Symmetrical Supercapacitors

AbstractSupercapacitor energy storage devices and activated carbon (AC) manufacturing materials for producing high‐performance supercapacitors have received extensive attention from researchers. Biomass‐based AC has been extensively studied due to its environmental friendliness, abundant availability, porous structure, and high specific surface area. This work focuses on developing biomass‐based carbon electrodes derived from Cerbera manghas fiber (CMF) with variations in carbonization temperature to obtain optimum supercapacitor cell performance. The prepared CMF AC was characterized using energy dispersive X‐ray, Fourier transform infrared, X‐ray diffraction, scanning electron microscope, and nitrogen isothermal adsorption–desorption. CMF AC with the optimum carbonization temperature (CMF‐600) produced a fibrous structure with a lot of mesoporous so that the specific surface area and specific capacitance were high, namely, 721.495 m2 g−1 and 221 F g−1 at scan rate 1 mV s−1, respectively. The results of this study indicate that selecting the optimum temperature can enhance the performance of supercapacitor cells and make AC based on CMF biomass potential for cheap and efficient energy storage applications.

Carbon pools in forest systems and new estimation based on an investigation of carbon sequestration

Forests, the ancient wooden giants, are both symbols of natural beauty and reservoirs of carbon stocks. The current climate crisis has created an urgent need for an in-depth study of forest ecosystems and carbon stocks. Based on forest inventory data from field surveys and four bioclimatic zones [Zone 1 (Z1, humid forest), Zone 2 (Z2, semi-humid forest), Zone 3 (Z3, semi-humid to semi-arid forest-grassland), and Zone 4 (Z4, semi-arid typical grassland)], two methods [Method 1 (M1) and Method 2 (M2)] were used to estimate carbon stocks in forest ecosystems in Shaanxi Province, China, and explored the spatial patterns of carbon pools and potential influences. The total forest ecosystem carbon pool amounted to 520.80 Tg C, of which 53.60% was stored aboveground, 17.16% belowground, and 29.24% in soil (depth of 0–10 cm). Spatially, there were marked north-south gradients in both biomass (Z2 > Z3 > Z1 > Z4) and soil organic carbon densities (Z1 > Z2 > Z3 > Z4). The differences between aboveground and belowground biomass carbon density across broadleaf, needle-leaf, and broadleaf and needle-leaf mixed forest were not pronounced, while soil organic carbon density had the order of broadleaf (18.38 Mg C/ha) > needle-leaf (11.29 Mg C/ha) > broadleaf and needle-leaf mixed forest (10.33 Mg C/ha). Under an ideal scenario that excludes external factors, mainly forest growth, the sequestration potential of forest biomass by 2032 was estimated by M1 as 85.43 Tg, and by M2 to be substantially higher at 176.21 Tg. As of 2062, M1 estimated 155.97 Tg of sequestration potential for forest biomass. The spatial patterns of forest biomass and soil carbon density were closely related to climatic factors, and these relationships allowed the spatial division into two distinct climatic regions. Moreover, biomass carbon density was significantly correlated with the normalized difference vegetation index, soil silt, and elevation. This study provides key information for promoting the strategic shift from light-green to deep-green forest systems in Shannxi Province and updates the estimation methods of forest ecosystems’ carbon pools based on field surveys.

Promoting Circular Economy of the Building Industry by the Use of Straw Bales: A Review

Over the past decade, the concept of a circular economy has increasingly gained attention as a framework for guiding businesses and policymakers. Given its significant environmental impact, the building industry plays a pivotal role in the transition toward a circular economy. To address this, our review proposes a bio-based building material, specifically straw bale, which elaborates on the circularity of bio-based buildings based on the 3R principles of a circular economy: reduce, reuse, and recycle. In terms of the “reduce” principle, straw-bale buildings can reduce construction waste, the environmental impact, energy requirements, and carbon emissions. Regarding the “reuse” principle, straw-bale buildings utilize agricultural waste resources and are easily disassembled due to their prefabrication. As for the “recycle” principle, straw-bale buildings can undergo physical, biological, and biochemical conversion processes (thermochemical conversion), yielding both wooden composite boards and potential biogas and biomass fuels for electricity and heating. This study evaluates the contribution of straw packaging construction and the use of straw as a raw material, using the 3R principles to determine future research opportunities for the construction industry to achieve a circular economy. The results of this study offer circular economy solutions and interdisciplinary research insights for researchers and practitioners interested in the building environment.

Correction to: Biomass and bioenergy potentials of bioresidues: assessment methodology development and application to the region of Lafões

Correction to: Biomass and bioenergy potentials of bioresidues: assessment methodology development and application to the region of Lafões

Innovative approaches for amino acid production via consolidated bioprocessing of agricultural biomass.

Agricultural plantations in Indonesia and Malaysia yield substantial waste, necessitating proper disposal to address environmental concerns. Yet, these wastes, rich in starch and lignocellulosic content, offer an opportunity for value-added product development, particularly amino acid production. Traditional methods often rely on costly commercial enzymes to convert biomass into fermentable sugars for amino acid production. An alternative, consolidated bioprocessing, enables the direct conversion of agricultural biomass into amino acids using selected microorganisms. This review provides a comprehensive assessment of the potential of agricultural biomass in Indonesia and Malaysia for amino acid production through consolidated bioprocessing. It explores suitable microorganisms and presents a case study on using Bacillus subtilis ATCC 6051 to produce 9.56mg/mL of amino acids directly from pineapple plant stems. These findings contribute to the advancement of sustainable amino acid production methods using agricultural biomass especially in Indonesia and Malaysia through consolidated bioprocessing, reducing waste and enhancing environmental sustainability.