Biological Transparency Window Research Articles

Near-Infrared Multiwavelength Raman Anti-Stokes/Stokes Thermometry of Titanium Dioxide

The use of multiple wavelengths to excite Titanium Dioxide Raman scattering in the near-infrared was investigated for optical nanothermometry. Indeed, Raman spectroscopy can be a very interesting technique for this purpose, as it offers non-disruptive contactless measurements with a high spatial resolution, down to a few µm. A method based on the ratio between the anti-Stokes and Stokes peaks of Anatase Titanium Dioxide was proposed and tested at three different wavelengths, 785, 800 and 980 nm, falling into the first biological transparency window (BTW-I). Using a temperature-controller stage, the temperature response of the sample was measured between 20 and 50 °C, allowing the thermal sensitivity for this range to be estimated. The use of sufficiently high laser power results in the generation of local heating. A proof of concept of the proposed thermometric method was performed by determining the extent of local heating induced by increasing laser power. By exciting with an 800 nm laser at low power intensities, a temperature equal to room temperature (RT) was found, while a maximum temperature increase of 15 °C was detected using the anti-Stokes/Stokes method.

(Invited) Core-Multi-Shell Design: Unlocking Multimodal Capabilities in Lanthanide-Based Nanoparticles

The remarkable optomagnetic properties of the lanthanides (Ln) make Ln-based materials ideal for biomedical applications, including diagnostic (e.g., imaging, nanothermometry) and therapeutic (e.g., drug delivery, photodynamic therapy) approaches. This is due the unique electronic properties of the f-elements allowing for upconversion and near-infrared emission under near-infrared excitation as well as high magnetic moments. Yet, challenges remain, including low emission intensity and efficiency of small nanoparticles (NPs), and reliable, fast synthesis routes. As material chemists, we tackle these challenges with new designs of Ln-NPs by chemically controlled synthesis, application-oriented surface chemistry, and understanding of structure-property-relationships. We developed a straightforward and rapid microwave-assisted synthesis approach towards core-multi-shell Ln-NPs. Careful architecture design and choice of RE3+ dopant ions allow to tune the optical properties of the resultant nanoparticles, i.e., upconversion and near-infrared emission. This presentation will shed light on recent results with respect to microwave-assisted synthesis of Ln-NPs as well as structural and optomagnetic properties, seeking biomedical application.For instance, multimodal bioimaging probes merging optical imaging, magnetic resonance imaging (MRI), and X-ray computed tomography (CT) capabilities have attracted considerable attention due to their potential biomedical applications. This includes nanoparticles that combine upconverting Er3+/Yb3+ and magnetic NaDyF4 for optical/T2-weighted MRI/CT multimodal capabilities. A known drawback of multimodal probes that merge the upconverting Er3+/Yb3+ ion pair with magnetic Dy3+ ions for T2-weighted MRI is the loss of upconversion emission due to Dy3+ poisoning. The synthesis of controlled nanoparticle architectures with tuned inner NaGdF4 shell thicknesses separating Dy3+ and Er3+/Yb3+ allow to shed light on this distance-dependent loss of upconversion due to Yb3+ → Dy3+ energy transfer. As a result, the Ln-NP architecture was tuned to not only restore but enhanced the upconversion emission. In addition to multimodal imaging, Ln-NPs are promising candidates for application in nanothermometry due to the distinct, temperature-induced changes in their spectral features. We seek the development of novel Ln-NP nanothermometers for new opportunities in the near-infrared biological transparency windows (1000 to 2000 nm), by doping RE3+ ions, such as Er3+ and Tm3+ as well as unconventional Pr3+, into core-multi-shell lanthanide-based nanoparticles.

Water-Soluble Alumina-Coated Indium Phosphide Core-Shell Quantum Dots with Efficient Deep-Red Emission Beyond 700nm.

Solution-processed colloidal III-V semiconductor-based quantum dots (QDs) represent promising and environmentally-friendly alternatives to Cd-based QDs in the realms of optoelectronics and biological applications. While InP-based core-shell QDs have demonstrated efficientlight-emitting diode (LED) performance in the visible region, achieving deep-red emission (above 700nm) with a narrow linewidth has proven challenging. Herein, the study presents a novel strategy for synthesizing InP/ZnSe/ZnS core-shell-shell QDs tailored for emission in the first biological transparency window. The resulting QDs exhibit an emission wavelength up to 725nm with a narrow peak full width at half maximum (FWHM) down to 107 meV (45nm). To enhance the biocompatibility and chemical stability of the QDs, their surface is further capped with a layer of amorphous alumina resulting in an InP/ZnSe/ZnS/Al2O3 heterostructure. This surface passivation not only ensures environmental- and photostability but also enhances the photoluminescence quantum yield (PLQY). The alumina capping enables the aqueous phase transfer via surface ligand exchange using mercaptopropionic acid (MPA) while maintaining the initial quantum yield. The resulting QDs demonstrate a significant potential for advancing next-generation optoelectronic technologies and bio-applications.

Temperature-Dependent Luminescence of Nd3+-Doped Carbon Nanodots for Nanothermometry.

Noncontact optical nanothermometers operating within the biological transparency windows are required to study temperature-sensitive biological phenomena at the nanoscale. Nanoparticles containing rare-earth ions such as Nd3+ have been reported to be efficient luminescence-based ratiometric thermometers, however often limited by poor water solubility and concentration-related quenching effects. Herein, we introduce a new type of nanothermometer, obtained by employing low-dimensional carbon nanodots (CNDs) as matrices to host Nd3+ ions (NdCNDs). By means of a one-pot procedure, small (∼7-12 nm), water-soluble nanoparticles were obtained, with high (15 wt %) Nd3+ loading. This stable metal-CND system features temperature-dependent photoluminescence in the second biological window (BW II) upon irradiation at 808 nm, thereby allowing accurate and reversible (heating/cooling) temperature measurements with good sensitivity and thermal resolution. The system possesses remarkable biocompatibility in vitro and promising performance at a high penetration depth in tissue models.

(Invited) Novel Plasmonic Materials as Fluorescence Enhancers for Biosensing and Bioimaging in Near Infrared Window

Novel plasmonic nanostructures, which are near-IR active, has been developed in our group as powerful fluorescence enhancers. The technology is highly versatile for ultrasensitive diagnosis and deep tissue imaging-two key areas for future diagnostics. I will present some nanostructures we have designed and developed and then discuss their applications in biosensing and cell imaging in near infrared biological transparency window.

Organic Photothermal Materials Obtained Using Thermally Activated Delayed Fluorescence Design Principles.

Organic small molecules with high photothermal conversion efficiencies that absorb near-infrared light are desirable for photothermal therapy due to their improved biocompatibility compared to inorganic materials and their ability to absorb light in the biological transparency window (650-1350 nm). Here we report three donor-acceptor organic materials DM-ANDI, O-ANDI, and S-ANDI that show high photothermal conversion efficiencies of 46-68 % with near-infrared absorption. The design of these molecules is based on the rational modification of a thermally activated delayed fluorescence material to favour a low photoluminescence quantum yield by reducing HOMO-LUMO overlap. Encapsulating these materials into either neat nanoparticles or aggregated organic dots modulates their photothermal conversion efficiencies, and also facilitates dispersion in water.

Nanothermometer Based on Polychlorinated Trityl Radicals Showing Two-Photon Excitation and Emission in the Biological Transparency Window: Temperature Monitoring of Biological Tissues.

Nanothermometers are emerging probes as biomedical diagnostic tools. Especially appealing are nanoprobes using NIR light in the range of biological transparency window (BTW) since they have the advantages of a deeper penetration into biological tissues, better contrast, reduced phototoxicity and photobleaching. This article reports the preparation and characterization of organic nanoparticles (ONPs) doped with two polychlorinated trityl radicals (TTM and PTM), as well as studies of their electronic and optical properties. Such ONPs having inside isolated radical molecules and dimeric excimers, can be two-photon excited showing optimal properties for temperature sensing. Remarkably, in TTM-based ONPs the emission intensity of the isolated radical species is unaltered increasing temperature, while the excimer emission intensity decreases strongly being thereby able to monitor temperature changes with an excellent thermal absolute sensitivity of 0.6-3.7%K-1 in the temperature range of 278-328K. The temperature dependence of the excimeric bands of ONPs are theoretically simulated by using electronic structure calculations and a vibronic Hamiltonian model. Finally, TTM-doped ONPs as ratiometric NIR-nanothermometers are tested with two-photon excitationwith enucleated pig eye sclera, as a real tissue model, obtaining a similar temperature sensitivity as in aqueous suspensions, demonstrating their potential as NIR nanothermometers for bio applications.

Zwitterionic Functionalization of Persistent Luminescence Nanoparticles: Physicochemical Characterizations and In Vivo Biodistribution in Mice

After excitation in the biological transparency window, chromium-doped zinc gallate nanoparticles (ZGO NPs) emit near-infrared luminescence for more than an hour, allowing long-term imaging to be performed without background autofluorescence. However, these nanoparticles are recognized in just a few minutes by serum proteins and are then trapped in the liver. In this article, we put forth that liver uptake can be delayed when coating the surface of ZGO NPs with zwitterions. We focused on the use of a very small zwitterion molecule of 330 Da derived from sulfobetaine silane (SBS) and its grafting in one step and in water onto zinc gallate nanoparticles, and we compared the colloidal stability, the in vitro interactions with serum proteins, and the biodistribution in mice with PEGylated ZGO NPs (5000 Da) prepared in two steps in organic solvent. In vitro quantification of serum protein adsorption suggests that the similarity between the sulfobetaine and the cell membrane is enough to reduce protein adsorption as much as a PEGylation, despite the difference in coating thickness and molecular weight. This study has also proved that a combination of good protein repulsion and a smaller size compared to PEGylated NPs allows similar circulation times to be obtained in mice with zwitterionic or PEG coatings. Therefore, its use could offer new opportunities for further in vivo application of functionalized ZGO derivative NPs.

All‐Optical Thermometry with Infrared Emitting Defects in Diamond

AbstractDiamond color centers (optically active defects) can be used for all‐optical thermometry for non‐invasive and localized temperature measurements. The visible to near‐infrared photoluminescence of these defects is greatly attenuated in optical fibres and biological samples and therefore limits their use. A color center in Si‐doped diamond with emission coinciding with the O‐band and a major biological transparency window has recently been reported. It has a zero phonon line (ZPL) at 1221 nm and well‐resolved phonon side‐band features. In this work, a strong temperature dependence above 150 K is observed, allowing for accurate temperature measurements up to approximately 420 K. The temperature can be determined via spectral shifts or thermal broadening of the ZPL and through the intensity ratio between the ZPL and the phonon side‐band to a maximum temperature resolution of 0.57 K/. Thermometry using these micro‐diamonds is demonstrated for both electronic and biological applications highlighting their versatility. The potential for further enhancements in sensitivity is discussed.

Nickel‐Related Centers in HPHT Microdiamonds for Near‐Infrared Luminescent Thermometry

Nano‐ and microcrystals of diamond are attractive for optical thermometry applications and possess unique optical properties as well as high chemical stability and biocompatibility. For biological application, there are interests of diamonds with color centers that emit in the biological transparency window. One such defect is nickel‐related color centers that radiate in the near‐infrared range (1.4 eV Ni centers), but have not yet been sufficiently investigated. In this study, the optical characteristics of high‐pressure high‐temperature (HPHT) diamond microcrystals with average sizes of 4 and 30 μm containing 1.4 eV Ni centers are reported. The temperature dependence of the spectral and temporal properties of Ni center emissions in the range from room temperature to 85 °C is demonstrated and thereby the possibility of appliance these centers as temperature sensors. The relative temperature sensitivities of luminescence peak intensity and lifetime for Ni centers are found to be 1.3% K−1 and 0.42% K−1, respectively. Moreover, the temperature determination accuracy reaches better than 1 K.

Single Doping for Triple Functions: Integrated Theranostic Nanoplatforms for Multimodal Image-Guided Tumor Therapy.

Accurate location and efficient treatment of diseases by multifunctional nanoplatforms are appealing but face great challenges. Theranostic agents through the physical combination of different functional nanoparticles are demonstrated to be effective. Yet, the complicated biological environment often leads to ambiguous fates of each agent, which fails to keep the behaviors of imaging and therapeutic components in a simultaneous manner. Herein, "integrated" theranostic NPs, Gd-doped CuWO4 (CWG) with strong near-infrared (808nm) absorption, the longest absorption peak of reported CuWO4 , located in the biological transparent window, are constructed. The single doping of trace amount of Gd not only endows them with a distinguished magnetic resonance imaging capability (r1 = 12.01 mM-1 s-1 ), but also concurrently imposes great effect on the valence states of matrix ion (Cu), as evidenced by theoretical calculation results. The charge distribution shift of Cu would facilitate ·OH generation, beneficial for chemodynamic therapy (CDT). Moreover, CWG NPs display remarkable photoacoustic (PA) and computed tomography (CT) imaging capabilities (S = 10.33 HU mM-1 ). Such integrated theranostics afford a paradigm for multimodal imaging-guided synergistic therapy with all-in-one single nanoparticle.

Silicon Vacancy in Boron-Doped Nanodiamonds for Optical Temperature Sensing.

Boron-doped nanodiamonds (BNDs) have recently shown a promising potential in hyperthermia and thermoablation therapy, especially in heating tumor cells. To remotely monitor eigen temperature during such operations, diamond color centers have shown a sensitive optical temperature sensing. Nitrogen-vacancy (NV) color center in diamonds have shown the best sensitivity in nanothermometry; however, spin manipulation of the NV center with green laser and microwave-frequency excitations is still a huge challenge for biological applications. Silicon-vacancy (SiV) color center in nano/bulk diamonds has shown a great potential to be a good replacement of the NV center in diamond as it can be excited and detected within the biological transparency window and its thermometry operations depends only on its zero-phonon line (ZPL) shift as a function of temperature changes. In this work, BNDs were carefully etched on smooth diamond nanocrystals' sharp edges and implanted with silicon for optical temperature sensing. Optical temperature sensing using SiV color centers in BNDs was performed over a small range of temperature within the biological temperature window (296-308 K) with an excellent sensitivity of 0.2 K in 10 s integration time. These results indicate that there are likely to be better application of more biocompatible BNDs in hyperthermia and thermoablation therapy using a biocompatible diamond color center.

Single Walled Carbon Nanotube (SWCNT) Detection of Interleukin 1 β (IL-1β)

Single walled carbon nanotubes (SWCNTs) are known for their fluorescent properties in the near-infrared region, as well as their photostability and emission within the “biological transparency window”. This makes them useful as nanosensors for in vivo signal detection. The stability of SWCNTs also allows for repeated, long-term measurements. Implantation of these sensors in vivo allow for detection of biomarkers of specific diseases. Interleukin 1 β (IL-1β) is a pro-inflammatory cytokine involved in pleiotropic cellular processes. IL-1β is commonly found at elevated levels in cancerous tissues and other chronic diseases. We are working to design an IL-1β nanosensor by evaluation of optical band gap changes in the presence of the desired antigen. This is accomplished by conjugating an antibody of interest to the SWCNT wrapped with TAT6-NH2 DNA oligonucleotide and passivating the surface of the SWCNT with bovine serum albumin (BSA). This causes the SWCNT’s hydrophobic surface to be less available for non-specific protein interference, creating a more functional sensor. We observed significant changes in the sensor’s center wavelength and change in fluorescence intensity in the antigen’s presence, serving as an indication of the functionality of the nanosensor. We are also working on studying the capability of fluorescent dyes to exacerbate the wavelength shift seen in SWCNTs. This is accomplished by conjugating the dye to a nanosensor and introducing its complimentary antigen that will remove the dye from the SWCNT surface, intensifying its shift in wavelength. The overall goal of developing this type of nanosensor is to use it in point-of-care scenarios to measure biomarker levels in patient samples or in vivo, allowing for detection of chronic diseases that may be difficult to diagnose early on.

Designing photon upconversion nanoparticles capable of intense emission in whole human blood

The properties of upconverting nanoparticles (UCNPs) are crucial for their applications in biomedicine. For studies of organisms and biological materials, the penetration depth of excitation light is also essential as the depth from which the luminescence can be detected. Currently, many researchers are trying to obtain UCNPs with intense emission under excitation wavelengths from the biological transparency windows to increase the penetration depth. However, studies comparing the properties of various types of UCNPs in real conditions are rare. This article shows how deep the 808, 975, 1208, and 1532 nm laser radiation penetrates human blood. Moreover, we determined how thick a layer of blood still permits for observation of the luminescence signal. The measured luminescence properties indicated that the near-infrared light could pass through the blood even to a depth of 7.5 mm. The determined properties of core/shell NaErF4/NaYF4 materials are the most advantageous, and their emission is detectable through 3.0 mm of blood layer using a 1532 nm laser. We prove that the NaErF4/NaYF4 UCNPs can be perfect alternatives for the most studied NaYF4:Yb3+,Er3+/NaYF4. Additionally, the setup proposed in this article can potentially decrease reliance on animal testing in initial biomedicine research.

Bio-inspired self-assembled bacteriochlorin nanoparticles for superior visualization and photothermal ablation of tumors

BackgroundAlthough hyperthermia-based photothermal therapy (PTT) has achieved great success in the battle against malignant tumors, various commonly used photothermal sensitizers still suffer from non-selective tumor accumulation, limited photothermal conversion efficiency, potential toxicity and side effects, as well as complex and low cost-effective preparation process. Therefore, novel photothermal sensitizers are urgently required. The well-organized self-assembling of natural bacteriochlorophylls with superior photothermal property may provide an interesting option for the engineering of ideal PTS. MethodsInspired by the self-assembly peripheral light-harvesting antennas of natural bacteriochlorin in microorganisms, a biomimetic light-harvesting nanosystem (Nano-Bc) was developed via bacteriochlorophylls self-arranging in aqueous phase. The characterization of Nano-Bc were measured using DLS, TEM, UV−vis−near-infrared spectroscopy and preclinical PA imaging system. The cytotoxicity of Nano-Bc was quantitatively evaluated via a standard MTT assay using mouse breast cancer 4T1 cells, and the in vivo photothermal eradication of tumor was investigated in the 4T1 breast tumor-bearing mouse model. ResultsThe obtained bacteriochlorin nanoparticles (Nano-Bc) exhibited ultra-high photothermal performance within the biological transparent window, showing superior heating capacity compared to commonly used photothermal sensitizers of organic dye indocyanine green and inorganic gold nanorods. Guiding by the inherent photoacoustic imaging of Nano-Bc, complete tumor elimination in vitro and vivo was evidenced upon laser irradiation. ConclusionThe green and facile preparation, ultra-high photothermal effect in the transparent window, excellent photoacoustic imaging capacity, and great biosafety prompt, the bio-inspired Nano-Bc as a promising theranostic platform against cancer in the areas of healthcare.

Single walled carbon nanotube optical reporter for amyloid beta detection

AbstractBackgroundAmyloid beta (Aß) extracellular deposits are one of the pathohistological hallmarks of Alzheimer’s Disease (AD). In recent years intracellular accumulation of Aß has been linked with early pathogenic mechanisms. Recent reports now associate intracellular Aβ accumulation, and lysosomal disfunction as an early event in the disease, preceding extracellular amyloid‐deposits. Today methods to visualize intracellular Aβ accumulation rely on antibody staining or pre‐labeled Aβ. There is an outstanding need for live‐imaging tools capable of monitoring Aβ dynamics at the cellular level.MethodWe have developed an optical sensor that can monitor Aß in live cells transiently. Single wall carbon nanotubes (SWCNT) present advantages as optical sensors owing to their near‐infrared emission, as well as photostability and high‐sensitivity. SWCNT emission spectra (wavelength ranges of 1100‐1150nm) is within the biological transparency window (1000‐1700nm) allowing for optimal imaging in live samples. SWCNT were non‐covalently biofunctionalized; by which we confer selectivity to Aβ.To obtain intracellular detection we used two cell lines: monocytes (THP‐1) and differentiated SH‐SY5Y. Cells were incubated with functionalized nanotubes. We utilized near‐infrared spectroscopy and hyper‐spectral microscopy to obtain spectral response from live‐cells.ResultWe developed and characterized a new class of bio‐functionalized intrinsically photoluminescent SWCNT sensor that can detect Aß via shifting of their intrinsic near‐infrared emission wavelength. Our biofunctionalized sensors specifically recognize Aβ in the solution phase, showing a monochromatic center wavelength decrease in a dose‐dependent fashion. The reporters show high specificity compared to competing analytes and in serum samples. In cell models, nanosensors accumulate intracellularly and probe Aβ introduced to the cells specifically. Finally, initial through‐skull near‐IR imaging in‐vivo in an AD model (5XFAD), following intracranial injection, show significant decrease in central wavelength in AD mice compared to wild type.ConclusionThe SWCNT sensor provide a framework for dynamically investigating Aβ in live samples. We believe utilizing the nanosensors can enhance the study of Aβ ‐pathogenic mechanism, structure and molecular function and consequently improve and accelerate effective amyloid‐targeted therapies.

Monitoring the Formation of Fibrin Clots as Part of the Coagulation Cascade Using Fluorescent Single-Walled Carbon Nanotubes.

Blood coagulation is a critical defense mechanism against bleeding that results in the conversion of liquid blood into a solid clot through a complicated cascade, which involves multiple clotting factors. One of the final steps in the coagulation pathway is the conversion of fibrinogen to insoluble fibrin mediated by thrombin. Because coagulation disorders can be life-threatening, the development of novel methods for monitoring the coagulation cascade dynamics is of high importance. Here, we use near-infrared (NIR)-fluorescent single-walled carbon nanotubes (SWCNTs) to image and monitor fibrin clotting in real time. Following the binding of fibrinogen to a tailored SWCNT platform, thrombin transforms the fibrinogen into fibrin monomers, which start to polymerize. The SWCNTs are incorporated within the clot and can be clearly visualized in the NIR-fluorescent channel, where the signal-to-noise ratio is improved compared to bright-field imaging in the visible range. Moreover, the diffusion of individual SWCNTs within the fibrin clot gradually slows down after the addition of thrombin, manifesting a coagulation rate that depends on both fibrinogen and thrombin concentrations. Our platform can open new opportunities for coagulation disorder diagnostics and allow for real-time monitoring of the coagulation cascade with a NIR optical signal output in the biological transparency window.

Dibenzodipyridophenazines with Dendritic Electron Donors Exhibiting Deep-Red Emission and Thermally Activated Delayed Fluorescence

The development of deep-red thermally activated delayed fluorescence (TADF) emitters is important for applications such as organic light-emitting diodes (OLEDs) and biological imaging. Design strategies for red-shifting emission include synthesizing rigid acceptor cores to limit nonradiative decay and employing strong electron-donating groups. In this work, three novel luminescent donor-acceptor compounds based on the dibenzo[a,c]dipyrido[3,2-h:20-30-j]-phenazine-12-yl (BPPZ) acceptor were prepared using dendritic carbazole-based donors 3,3″,6,6″-tetramethoxy-9'H-9,3':6',9″-tercarbazole (TMTC), N3,N3,N6,N6-tetra-p-tolyl-9H-carbazole-3,6-diamine (TTAC), and N3,N3,N6,N6-tetrakis(4-methoxyphenyl)-9H-carbazole-3,6-diamine (TMAC). Here, dimethoxycarbazole, ditolylamine, and bis(4-methoxyphenyl)amine were introduced at the 3,6-positions of carbazole to increase the strength of these donors and induce long-wavelength emission. Substituent effects were investigated with experiments and theoretical calculations. The emission maxima of these materials in toluene were found to be 562, 658, and 680 nm for BPPZ-2TMTC, BPPZ-2TTAC, and BPPZ-2TMAC, respectively, highlighting the exceptional strength of the TMAC donor, which pushes the emission into the deep-red region of the visible spectrum as well as into the biological transparency window (650-1350 nm). Long-lived emission lifetimes were observed in each emitter due to TADF in BPPZ-2TMC and BPPZ-2TTAC, as well as room-temperature phosphorescence in BPPZ-2TMAC. Overall, this work showcases deep-red emissive dendritic donor-acceptor materials which have potential as bioimaging agents with emission in the biological transparency window.

Photothermal therapeutic ability of copper open-shell nanostructures that are effective in the second biological transparency window based on symmetry breaking-induced plasmonic properties.

In this study, a photothermal therapy agent that works efficiently in the second biological transparency window was developed based on the localized surface plasmon (LSP) resonance of symmetry-broken open-shell nanostructures of low-cost Cu (CuOSNs). The strong LSP resonance and superior photothermal conversion ability in the second biological transparency window were achieved by generating the dipolar bonding mode due to the plasmon hybridization between the nanoshell dipole and the nanohole dipole at the opening edge in CuOSNs derived from the symmetry breaking of a Cu nanoshell. Oxidative dissolution of CuOSNs in water was significantly suppressed by successive coating with the self-assembled monolayer of 16-mercaptohexadecanoic acid and a thin silica layer. Furthermore, the stability in phosphate buffered saline, which models the biological environment, was attained by further coating the nanoparticles with polyethylene glycol. It was demonstrated from in vitro cell tests using HeLa cells that the cytotoxicity of CuOSNs was effectively suppressed by the surface protection. The viability of HeLa cells incubated with CuOSNs was decreased under the irradiation of low intensity 1060 nm laser with increasing number of CuOSNs. These results demonstrate that low-cost symmetry-broken Cu-based nanostructures can act as an excellent photothermal therapy agent in the second biological transparency window.

Heat, pH, and salt: synthesis strategies to favor formation of near-infrared emissive DNA-stabilized silver nanoclusters.

We present chemical synthesis strategies for DNA-stabilized silver nanoclusters (AgN-DNAs) with near-infrared (NIR) emission in the biological tissue transparency windows. Elevated temperatures can significantly increase chemical yield of near-infrared nanoclusters. In most cases, basic pH favors near-infrared nanoclusters while micromolar amounts of NaCl inhibit their formation.