Biodegradable Mulch Research Articles

Life cycle assessment of different strawberry production methods in Germany with a particular focus on plastic emissions

PurposeUsing plastic for strawberry cultivation (so-called plasticulture) is widespread to extend cultivation, reduce weed stress and water and nutrient demand, and protect plants. We assess the environmental impacts of different plasticulture methods, including possible impacts caused by the (accidental) emission of plastics. The goals are to help farmers determine the most environmentally friendly cultivation technique and to test the inclusion of plastic pollution in life cycle assessment (LCA).MethodsAn LCA is conducted for a baseline scenario without plasticulture and 11 plasticulture scenarios. The scenarios are modeled using the regionalized ecoinvent 3.8 cut-off database. The functional unit is 1 kg of strawberries of marketable quality at the farm gate produced in the year 2021. The amounts of fertilizer, irrigation, and strawberry output of the scenarios are adapted depending on the plasticulture method based on an extensive literature review. The environmental impacts are assessed using the life cycle impact assessment methods of the Product Environmental Footprint (PEF) recommended by the Joint Research Centre of the European Commission, which is extended to account for plastic-related impacts. The impacts are normalized, weighted, and aggregated, resulting in one single impact score per scenario.Results and discussionThe scenarios using either a combination of conventional mulch film and row cover or biodegradable mulch film have the lowest total impacts; a macro tunnel or greenhouse causes the highest impacts. There seems to be no trade-off between maximizing productivity and lowering environmental impacts: the scenario with the highest yield also has one of the lowest overall impacts. Only direct emissions are considered regarding plastic pollution. Besides, the plastic pollution impact category is currently limited to the persistence of plastic in the environment and is extendable to but is not yet accounting for exposure and effect of plastic emission on humans and ecosystems.ConclusionPlasticulture can increase the yield and reduce environmental impacts for strawberry cultivation compared to open field cultivation. With the used normalization and weighting factors, plastic pollution makes up a considerable share of the overall environmental impact of strawberry cultivation, supporting the recent efforts of different research groups to include plastic emissions in LCA by developing suitable characterization factors.

Insights into the abiotic fragmentation of biodegradable mulches under accelerated weathering conditions

Biodegradable mulches (BMs) can be tilled into soils to mitigate disposal and environmental problems. However, the content of biodegradable microplastics (BMPs) would increase with the addition of biodegradable macroplastics (BMaPs). The fragmented particles have a strong affinity to soil pollutants, having the potential to transfer via the terrestrial food web in an agroecosystem. Based on the spectral analysis and particle size analysis, this study explored the physicochemical characteristics of weathered BMaPs and BMP-derived dissolved organic matter (DOMBMP). Ultraviolet (UV) irradiation reduced the mechanical strength of BMaPs and induced oxygenated functional groups, thus increasing surface roughness and hydrophilicity. This promoted the adsorption of aromatic compounds and heavy metals from soils to BMPs. After entering the water environment, the pH of the solution with DOMBMP decreased, whereas the concentration of dissolved organic carbon (DOC) increased. Compared with paper mulch, bioplastic mulch contributed a higher amount of DOMBMP, such as aromatic structure-containing chemicals and carboxylic acids, to the water environment but released fewer and smaller plastic particles. The findings from this study can help manage environmental risks and determine disposal strategies after the use of mulching.

Effect of Different Mulch Types on Soil Environment, Water and Fertilizer Use Efficiency, and Yield of Cabbage

This study aimed to address the crop growth and development issues caused by environmental factors in the area of the Liupan Mountains in Ningxia. In this area, there is a large temperature difference between day and night due to drought and low rainfall from spring to summer. The effects of farmland mulching for cabbage on soil environment, water and fertilizer use efficiency, and on cabbage were studied by comparing white common mulch (WCM), black common mulch (BCM), white and black biodegradable mulch (WBM and BBM), black permeable mulch (BPM), and black-and-white composite mulch (BWCM). The types of mulch suitable for application in the region were selected after a comprehensive comparative analysis. The results suggested that soil temperature and water content decreased in the mulch of the two biodegradable mulches and the permeable mulch compared with the control (WCM). Meanwhile, soil water content significantly increased into the rainy season in the mulch of BPM. The overall index of soil enzyme activity was 11.8% and 5.2% higher in WBCM and BBM than that in WCM. The soil overall fertility index of WCM exceeded the other treatments by 16.3%, 33.0%, 25.6%, 36.6%, and 25.4%. The water use efficiency and fertilizer bias productivity of BBM and BPM mulch treatments were the highest among all treatments. The economic yield and economic efficiency of cabbage in BBM, BPM, and WBCM mulch treatments were among the best. A comprehensive analysis of the indicators by completing principal components and affiliation functions revealed that WBCM, BBM, and BPM ranked in the top three in comprehensive scores. In conclusion, black biodegradable mulch, permeable mulch, and black-and-white composite mulch can be applied to replace the white common mulch, with black biodegradable mulch treatment performing the best.

Distribution properties of ultraviolet absorbents in different species of biodegradable plastics.

Ultraviolet absorbents (UVAs) in the environment have been of increasing concern because of their potential toxicity. However, data on UVAs in the biodegradable plastics are still limited. In this work, we determined the concentrations of 13 UVAs in 6 different types of biodegradable plastic products from Beijing, China, by an ultra-high-performance liquid chromatography with mass spectrometry and found the total concentrations in the range of 37.21-1,138,526 ng g-1. These target UVAs, BP (benzophenone), BP-3, BP-12, UV-328, UV-234, UV-326, UV-329, UV-360 and UV-P are prevalent in the plastic bags, garbage bags, food packaging bags, plastic lunch boxes and tableware, product packing bags and mulch films, except for BP-1, UV-320, UV-327 and UV-PS. This finding showed that the total concentrations of the 13 UVAs in biodegradable mulch films (mean: 1,138,527 ng g-1) were several orders of magnitude higher than those in the other 5 categories of samples (mean: 37.21-186.9 ng g-1). And the UV-328 and BP-1 were the most important components of UVAs in the biodegradable mulch films, with the levels ranging of 726,568-1,062,687 ng g-1 and 317,470-506,178 ng g-1, respectively. As the majority of UVAs were detected in biodegradable plastics, the potential risk of UVAs exposure may exist in the environment with the large-scale use of biodegradable plastics.

Yield and Quality of Processing Tomato as Improved by Biostimulants Based on Trichoderma sp. and Ascophyllum nodosum and Biodegradable Mulching Films

Tomato is a great source of bioactive compounds, is important for human health, and is cultivated worldwide. However, the high inputs required for its cultivation must be sustainably managed in order to limit yield losses, thus obtaining high-quality and environmentally friendly production. In this perspective, we compared four biostimulant treatments, i.e., Ascophyllum nodosum extract—Bio; microbial biostimulant containing the micro-organism Trichoderma afroharzianum—Mic; a combination of both—M-B; not treated—Control) and three mulch treatments (biodegradable film Ecovio—ECO; biodegradable film MaterBi®—NOV; bare soil—BS) and evaluated their effects on yield and quality traits in processing tomato. Both biodegradable films elicited a 27.0% yield increase compared to plants grown on bare soil, and biostimulants determined a 23.7% increase over the Control, with the best performance recorded for M-B (+24.8%). Biodegradable MaterBi® film (NOV) was associated with higher total soluble solids (TSS) and firmness values (average of 4.9 °Brix and 1.30 kg cm−2, respectively), even if a significant effect of biostimulants was observed only for the second element. Carotenoid content was higher in non-treated plants grown on bare soil as well as hydrophilic antioxidant activity (AA), but in this case, no differences between biostimulant treatments were recorded. The lipophilic AA in NOV-treated plants was about six and four times higher than observed in BS and ECO treatments, respectively; NOV also caused a 38.7% increase in ascorbic acid content over the Control but was not different from ECO. All biostimulant treatments elicited a 30% increase in phenol content compared to Control plants. Our findings highlight that microbial biostimulants based on A. nodosum extract and T. afroharzianum (both applied singularly and combined) can be considered a sustainable tool for increasing yield and improve some quality traits of processing tomato; in addition, we also confirmed the capability of biodegradable mulches, in particular, MaterBi®, to enhance the agronomic performance of tomato.

Glufosinate Ammonium-Loaded Halloysite Nanotubes for Slow-Release Weeding Polymer Mulch Films

Improving the performance and giving function to poly(butylene adipate-co-terephthalate) (PBAT)-based biodegradable mulch film have always been research hotspots. However, the problems of a translucent PBAT-based film, which decreases in performance over time and is easily damaged by weeds, need to be solved. In this study, 11.17 wt % of the commercial contact herbicide Glufosinate-ammonium (Glu) was loaded into the lumen of halloysite nanotubes (HNTs). The Glu-loaded HNTs (Glu@HNTs) and other treatment groups were further incorporated into the PBAT/poly(lactic acid) (PLA) composite films by melt blending and blow molding. Results demonstrated that Glu, HNTs, and Glu@HNTs dispersed uniformly in the composite films. Remarkably, while maintaining the original tensile strength of the film, the nominal strain of transverse fracture was increased by 19.6% to 51.2%, and the least water vapor transmission was reduced by 46.7% to 68.5%. Furthermore, the composite films added with Glu@HNTs can successfully kill green bristlegrass and show a good slow-release effect, which can avoid premature release of the herbicide before the weeds grow up. Overall, the combination of inorganic nanofiller-modified PBAT/PLA film and weeding has positive significance for reducing soil pollution and helping the long-term efficient use of biodegradable mulching.

Comparative life cycle assessment of polyethylene agricultural mulching film and alternative options including different end-of-life routes

With rising concerns about adverse impacts of agricultural plastic waste in the soil environment and microplastic problems, many options have been proposed to prevent agricultural plastic pollution. To evaluate the options environmentally, this study conducted a comparative life cycle assessment of mulching films with different thicknesses (0.01 mm and 0.014 mm), materials (polyethylene and poly (butylene adipate-co-terephthalate)), and end-of-life options (recycling, incineration and biodegradation). The results indicate that biodegradable film presents the lowest net environmental impacts in aquatic pollution and toxicity indicators, while the 0.014 mm polyethylene film performs the best in global warming potential and fossil resource depletion. Either reducing the soil content or increasing the collection rate of waste polyethylene films can reduce their environmental impacts, and the reducing proportions of 0.014 mm polyethylene films were found to be larger than those of 0.01 mm polyethylene films. In general, the biodegradable mulching film is found to be more environmental-friendly than polyethylene film, but potential improvement could be considered for greener design of the products by increasing biobased material. More efforts can be put on developing reliable inventory datasets of biodegradable materials production.

Strategies for Sustainable Management of Agricultural Waste Vinyl in South Korea

Vinyl, such as those in the form of mulching and vinyl houses, is used to improve agricultural productivity. It is generated as an agriculture waste vinyl (AWV) after use. The collected AWV is transported to a recycling facility and shredded, washed, and compressed to be recycled. Recycled materials can contribute to the circular economy of agriculture as they are used again as an agricultural plastic product. However, in Korea, there are concerns about the illegal disposal (landfill, incineration) of AWV. So, a new management model is needed in which stakeholders voluntarily establish an AWV management system. In this study, a sustainable management strategy was proposed. This strategy is reinforcing the responsibility of the producers of AWV and forms a value chain in the proper discharge after consumption by applying the deposit system proposed to recover AWV. Local governments and the National Agricultural Cooperative Federation (NH) proposed education to curb the illegal disposal of AWV, and for managing areas where a collection system has not yet been established, biodegradable mulching vinyl (BMV) was proposed to minimize the environmental pollution caused by AWV. It was calculated that the EPR contribution was 0.16 USD/kg, and the introduction of BMV was 0.42 USD/kg in Korea. This study will provide a new alternative in countries struggling with AWV management.

Impact of plastic mulching as a major source of microplastics in agroecosystems.

The contamination of agroecosystems by microplastics (MPs) has raised great concerns recently. Plastic mulching has contributed a lot in the building of MP pollution in farmlands. This technique has been in use for decades worldwide because of its immense advantages, preferably in drier and colder regions. The physical extraction of plastic mulches at the end of the growing season is very laborious and ineffective, and thus small pieces of mulches are left in the field which later convert into MP particles after aging, weathering, or on exposure to solar radiation. MPs not only influence physical, chemical, or biological properties of soils but also reduce crop productivity which could be a threat to our food security. They also interact with and accumulate other environmental contaminants such as microbial pathogens, heavy metals, and persistent organic pollutants on their surfaces which increase their risk of toxicity in the environment. MPs also transfer from one trophic level to the other in the food chain and ultimately may impact human health. Because of the ineffectiveness of the recovery of plastic film fragments from fields, researchers are now mainly focusing on alternative solutions to conventional plastic mulch films such as the use of biodegradable mulches. In this review, we have discussed the issue of plastic mulch films in agroecosystems and tried to link already existing knowledge to the current limitations in research on this topic from cropland soils and future prospects have been identified and proposed.

Infiltration and Water Use Efficiency of Maize Fields with Drip Irrigation and Biodegradable Mulches in the West Liaohe Plain, China.

Biodegradable mulches have the same temperature- and moisture-preservation effects as ordinary plastic mulches before degradation. After degradation, rainwater enters the soil through the damaged parts, improving precipitation utilization. Under drip irrigation with mulching, this study explores precipitation utilization of biodegradable mulches under different precipitation intensities and the effects of different biodegradable mulches on the yield and water use efficiency (WUE) of spring maize in the West Liaohe Plain, China. In this paper, in situ field observation experiments were conducted for three consecutive years from 2016 to 2018. Three types of white degradable mulch films were set up, with induction periods of 60 d (WM60), 80 d (WM80), and 100 d (WM100). Three types of black degradable mulch films were also used, with induction periods of 60 d (BM60), 80 d (BM80), and 100 d (BM100). Precipitation utilization, yield, and WUE under biodegradable mulches were studied, with ordinary plastic mulches (PM) and bare land (CK) set as controls. The results showed that as precipitation increased, the effective infiltration of precipitation decreased first and then increased. When precipitation reached 89.21 mm, plastic film mulching no longer affected precipitation utilization. Under the same precipitation intensity, the precipitation effective infiltration ratio increased as the damage to the biodegradable film increased. Still, the intensity of this increase gradually decreased as the damage increased. The highest yield and WUE were observed for the degradable mulch film with an induction period of 60 days in years with normal rainfall and for the degradable mulch film with an induction period of 100 days in dry years. In the West Liaohe Plain, maize planted under film receives drip irrigation. We recommend that growers select a degradable mulch film with a degradation rate of 36.64% and an induction period of approximately 60 days in years with normal rainfall, and a degradable mulch film with an induction period of 100 days in dry years.

Effects of Post-Fire Mulching with Loranthus europaeus Jacq. on Surface Runoff and Rainsplash Erosion in a Semi-Arid Pine Forest

To avoid flooding and erosion hazards, post-fire management actions are essential in Mediterranean forests after severe wildfires. In this regard, mulching is the most common action but some mulch materials, such as straw, may lead to adverse impacts in burned forests. The use of yellow mistletoe fruits (Loranthus europaeus Jacq., hereafter “LE”) for the production of biodegradable mulch and its effectiveness in post-fire hydrology have never been studied. To fill this gap, this study has evaluated surface runoff and rainsplash erosion in a pine forest in Central Eastern Spain burned by a wildfire and mulched by a mixture of LE fruits and straw (with or without adding clay particles) using a portable rainfall simulator. Compared to untreated sites, runoff increased in burned and mulched soils (by 13.6% for the mixture without clay and by 17.2% when clay was added, in the latter case significantly). This increase was mainly due to the compact layer created by mulch application on the soil surface. However, the peak flow and the time to peak were lower in mulched soils (on average by 32.7% and 60.5%, significantly only for the mulch mixture without clay), thus indicating that, in these soils, peak runoff takes longer and its maximum value is lower compared to untreated sites. Soil erosion noticeably and significantly decreased (up to 97%) in mulched areas in comparison to untreated sites without significant differences between the two mixtures. Overall, this study indicates to land managers that soil mulching with a mixture of Loranthus europaeus Jacq. and straw is an effective post-fire management action to reduce the soil erosion risk after a wildfire.

Accelerated degradation of plastic products via yeast enzyme treatment

Biodegradable plastics can solve the problem of unwanted plastics accumulating in the environment if they can be given the contradictory properties of durability in use and rapid degradation after use. Commercially available agricultural biodegradable mulch films are made from formulations containing polybutylene adipate-co-terephthalate (PBAT) to provide mechanical and UV resistance during the growing season. Although used films are ploughed into the soil using a tiller to promote decomposition, it is difficult if they remain durable. We showed that an enzyme produced by the leaf surface yeast Pseudozyma antarctica (PaE) degrades PBAT-containing films. In laboratory studies, PaE randomly cleaved the PBAT polymer chain and induced erosion of the film surface. In the field, commercial biodegradable films containing PBAT placed on ridges were weakened in both the warm and cold seasons by spraying the culture filtrate of P. antarctica. After the field was ploughed the next day, the size and total weight of residual film fragments decreased significantly (p < 0.05). Durable biodegradable plastics used in the field are degraded using PaE treatment and are broken down into small fragments by the plough. The resultant degradation products can then be more readily assimilated by many soil microorganisms.

Valorization of coffee wastes as plant growth promoter in mulching film production: A contribution to a circular economy

Food waste valorization, considered as energy and/or chemicals source, via biorefinery or biotechnology, gained great attention in recent years, because of the fast depletion of primary resources, increased waste generation and landfilling worldwide. Coffee by-products for example (i.e. coffee pulp, coffee husks, silver skin, spent coffee, etc.) have been investigated in different forms either as a source of antioxidant and valuable chemicals and as a filler in composites. A new valorization route for coffee silver skin (CSS), up to now just sent to damping, is here investigated: particulate bio-composites based on poly(butylene succinate-co-adipate) (PBSA), an aliphatic biodegradable polyester commercially available, have been formulated with up to a 30 wt% of CSS, in order to prepare mulching films for agriculture. The bacterial analysis of the filler indeed, has underlined the presence of potential Plant Growth-Promoting Bacteria species, mainly ascribed to the Bacillus genus, which can survive both the roasting and the compounding processes. The obtained composites have been characterized mechanically and thermally and their hydrophilic nature has been investigated by measuring their contact angle. Eventually, the bacteria release from the composite films has been examined by means of in-vitro tests. The plant growth promoting capability of the films was preliminarily evaluated in pot experiments using lettuce as a model crop. The composite films were able to release the endogenous bacteria in the soil and to stimulate plant and root growth of the assayed crop. The possibility to produce functionalized biodegradable mulching films by recycling agricultural wastes can thus be forecast, highlighting potential multiple advantages in terms of soil preservation/fertilization, decrease of polymeric materials in mulching products, exploitation of a waste.

Biodegradable mulch films significantly affected rhizosphere microbial communities and increased peanut yield

Biodegradable mulch films are widely used to replace conventional plastic films in agricultural fields. However, their ecological effects on different microbial communities that naturally inhabit agricultural fields are scarcely explored. Herein, differences in bacterial communities recovered from biofilms, bulk soil, and rhizosphere soil were comparatively assessed for polyethylene film (PE) and biodegradable mulch film (BDM) application in peanut planted fields. The results showed that the plastic film type significantly influenced the bacterial community in different ecological niches of agricultural fields (P < 0.001). Specifically, BDMs significantly increased the diversity and abundance of bacteria in the rhizosphere soil. The bacterial communities in each ecological niche were distinguishable from each other; bacterial communities in the rhizosphere soil showed the most pronounced response among different treatments. Acidobacteria and Pseudomonas were significantly enriched in the rhizosphere soil when BDMs were used. BDMs also increased the rhizosphere soil bacterial network complexity and stability. The enrichment of beneficial bacteria in the rhizosphere soil under BDMs may also have implications for the observed increase in peanut yield. Deepening analyses indicated that Pseudoxanthomonas and Glutamicibacter are biomarkers in biofilms of PE and BDMs respectively. Our study provides new insights into the consequences of the application of different types of plastic films on microbial communities in different ecological niches of agricultural fields.

The Effect of Wool Mulch on Plant Development in the Context of the Physical and Biological Conditions in Soil.

Mulching techniques can comprise a solution that better utilizes precipitation and irrigation water in such a manner that mitigates soil degradation and drought damage; however, there are still gaps in the literature with regard to the effect of the use of mulch materials on the development of plant-soil-microbe interactions. Waste fibers, as alternative biodegradable mulch materials, are becoming increasingly prominent. The effect of wool mulch (WM) on water use efficiency, with regard to pepper seedlings, was investigated in different soil types (sand, clay loam, peat) in a pot experiment. Two semi-field experiments were also set up to investigate the effect of WM-plant interactions on sweet pepper yields, as compared with agro textiles and straw mulches. Soil parameters (moisture, temperature, DHA, β-glucosidase enzymes, permanganate-oxidizable carbon) were measured during the growing season. The effect of WM on yield and biomass was more significant with the less frequent irrigation and the greater water-holding capacity of soils. Microbiological activity was significantly higher in the presence of plants, and because of the water retention of WM, the metabolic products of roots and the more balanced soil temperature were caused by plants. In the sandy soil, the straw mulch had a significantly better effect on microbiological parameters and yields than the agro textiles and WM. In soils with a higher water capacity, WM is a sustainable practice for improving the biological parameters and water use efficiency of soil. The effect of WM on yields cannot solely be explained by the water retention of the mulch; indeed, the development of biological activity and plant-soil-microbe interactions in the soil are also contributing factors.

Assessment of cryogenic pretreatment for simulating environmental weathering in the formation of surrogate micro- and nanoplastics from agricultural mulch film

Microplastics (MPs) and nanoplastics (NPs) from mulch films and other plastic materials employed in vegetable and small fruit production pose a major threat to agricultural ecosystems. For conducting controlled studies on MPs' and NPs' (MNPs') ecotoxicity to soil organisms and plants and fate and transport in soil, surrogate MNPs are required that mimic MNPs that form in agricultural fields. We have developed a procedure to prepare MPs from plastic films or pellets using mechanical milling and sieving, and conversion of the resultant MPs into NPs through wet grinding, both steps of which mimic the degradation and fragmentation of plastics in nature. The major goal of this study was to determine if cryogenic exposure of two biodegradable mulch films effectively mimics the embrittlement caused by environmental weathering in terms of the dimensional, thermal, chemical, and biodegradability properties of the formed MNPs. We found differences in size, surface charge, thermal and chemical properties, and biodegradability in soil between MNPs prepared from cryogenically treated vs. environmentally weathered films, related to the photochemical reactions occurring in the environment that were not mimicked by cryogenic treatment, such as depolymerization and cross-link formation. We also investigated the size reduction process for NPs and found that the size distribution was bimodal, with populations centered at 50 nm and 150–300 nm, and as the size reduction process progressed, the former subpopulation's proportion increased. The biodegradability of MPs in soil was greater than for NPs, a counter-intuitive trend since greater surface area exposure for NPs would increase biodegradability. The result isassociated with differences in surface and chemical properties and to minor components that are readily leached out during the formation of NPs. In summary, the use of weathered plastics as feedstock would likely produce MNPs that are more realistic than cryogenically-treated unweathered films for use in experimental studies.

Assessing Yield and Quality of Melon (Cucumis melo L.) Improved by Biodegradable Mulching Film.

Low-density polyethylene (LDPE) plastic mulching films have an important function, but at the end of their lifetime pose an economic and environmental problem in terms of their removal and disposal. Biodegradable mulching films represent an alternative to LDPE with the potential to avoid these environmental issues. In this preliminary study, we employed a biodegradable film based on Mater-Bi® (MB) in comparison with low-density polyethylene to assess their effect on the yield and particular quality traits (organoleptic and nutraceutical composition of the fruits) of muskmelon (cv Pregiato) grown on soils with different textures (clay-loam-CL and sandy loam-SL) in two private farms in South Italy. Soil temperature under the mulch was also measured. During the monitored periods, mean soil temperature under LDPE was higher (about 1.3 °C) than that under the biodegradable film and was higher in SL soil than in CL soil, at 25.5° and 24.2 °C, respectively. However, the biodegradable film was able to limit the daily temperature fluctuation, which was 1.7 °C in both soils compared with 2.3 °C recorded for LDPE. Fruit yields were higher with MB film than LDPE (+9.5%), irrespective of soil texture. MaterBi® also elicited increases in total soluble solids, polyphenols, flavonoids, and antioxidant activity compared with LDPE films: 13.3%, 22.4%, 27.2%, and 24.6%, respectively. Color parameters of flesh, namely brightness, chroma, and hue angle were better in fruits grown on LDPE. Our findings suggest that Mater-Bi® based biodegradable mulching film is a potentially valid alternative to traditional LDPE, particularly for obtaining the agronomical benefits outlined above and for promoting environmental sustainability due to its favourable biodegradable properties.

Response of Physiological Growth Characteristics of Rice to Different Biodegradable Mulching and Irrigation Methods in Cold Region of Northeast China

Highlights The tested biodegradable mulch film can be rapidly degraded in rice fields in cold regions and has good applicability. The degradation rate of white mulch film is faster than that of black film before the induction period, and the degradation law after the induction period is opposite. The combination of mulching film and water-saving irrigation can effectively enhance the photosynthetic capacity and dry matter transport of rice in cold regions. Through comprehensive evaluation, we found that the combination of ridge irrigation and mulching FC plastic film has the best effect on environmental protection and rice growth. Abstract. To reveal the mechanism of influence of different types of biodegradable plastic film mulching and irrigation combinations on the physiological growth characteristics of rice in cold regions, eight types of film mulching irrigation methods were designed, which combined four types of plastic film mulching and two types of irrigation methods for a total of nine treatments. The study analyzed the degradation law of degradable plastic film in rice fields in cold regions, and the effects of film-mulching irrigation methods on rice photosynthetic characteristics, dry matter transport, and rice yield. The results showed that the three biodegradable plastic films were suitable for the rice fields in the northeast cold region. Except for the jointing stage, mulching irrigation treatments could increase the chlorophyll content and net photosynthetic rate of rice, and the improvement degree showed a downward trend with the growth of rice. The film mulching irrigation treatments improved rice stems and leaves dry matter transport and grain contribution. The comprehensive evaluation based on the comprehensive index method showed that the combination of ridge irrigation and thin black biodegradable mulch is the best combination of biodegradable plastic film mulching and irrigation in the study area. Keywords: Biodegradable mulching, Comprehensive index method, Dry matter transportation, Irrigation method, Photosynthetic character.

Evaluating the effectiveness of biodegradable mulches in horticulture

Evaluating the effectiveness of biodegradable mulches in horticulture

Factors affecting farmers' adoption of and willingness to pay for biodegradable mulch films in China

The technology of biodegradable mulch films (BDMs) is an environmentally-friendly substitute for polyethylene (PE) mulches in agricultural production. Given the technology is new to the market, it is not easy for farmers to adopt it. Additionally, farmers’ decision on BDMs adoption is a multiple-stage process. To understand the decision process, this paper employs a double hurdle model to explore the factors affecting farmers’ adoption and willingness to pay for BDMs using the sample data from China. The results show farmers follow a two-stage decision-making process, farmers have to overcome the first hurdle, i.e., adoption or non-adoption, and then decide how much they are willing to pay for BDMs. The role of technology-specific characteristics is more important than adopter-specific characteristics in the adoption of BDMs. Understanding the impact of factors on farmers’ decision-making process can assist policymakers in designing programs, specifically tackling difficulties confronting farmers at different stages of decision-making.