Biostimulation Method Research Articles

Biostimulation methods based on chemical communication improve semen quality in male breeder rabbits

Biostimulation aims to optimize reproductive parameters as part of animal management practices by modulating animal sensory systems. Chemical signals, mostly known as pheromones, have a great potential in this regard. This study was conducted to determine the influence of short-term male rabbit exposure to different biological secretions, potentially pheromone-mediated, on reproductive parameters of males. Four groups of 18 males each were exposed to A) doe urine, B) 2-phenoxyethanol, C) doe vaginal swab, and D) distilled water (control), three times over a 2.5h exposure window, just before semen collection. Semen volume, sperm concentration and motility, as well as subpopulation analysis of the spermatozoa were assessed for each condition. Additionally, testosterone levels in blood samples were monitored at five time points over the 2.5 h exposure window. We found a higher percentage of motile, progressive, fast progressive and mid-progressive spermatozoa in any of the three experimental groups compared to the control group. In contrast, the semen volume and the percentage of immotile and non-progressive spermatozoa was generally higher in the control group. We then identified a higher proportion of a subpopulation of fast and progressive spermatozoa in groups A, B, and C compared to group D. Our data indicates that sperm motility increases when animals are exposed to specific biological fluids potentially containing pheromones, and that an increase in sperm volume does not correlate with an increase in spermatozoa concentration, progressiveness, and speed. Finally, no differences in testosterone levels were found among comparisons, although males of groups A and C (exposed to natural female biological fluids) showed a tendency towards higher testosterone levels. In conclusion, our results indicate that rabbit sperm quality increases upon exposure to the biological secretions proposed, thereby supporting further investigation into their molecular identity. This exploration could eventually pave the way for implementing the use of pheromones in rabbit husbandry to enhance reproductive and productive parameters in farmed rabbits.

Enhanced bioremediation of acid mine-influenced groundwater with micro-sized emulsified corn oil droplets (MOD) and sulfate-reducing bacteria (Desulfovibrio vulgaris) in a microcosm assay

High concentrations of metals and sulfates in acid mine drainage (AMD) are the cause of the severe environmental hazard that mining operations pose to the surrounding ecosystem. Little study has been conducted on the cost-effective biological process for treating high AMD. The current research investigated the potential of the proposed carbon source and sulfate reduction bacteria (SRB) culture in achieving the bioremediation of sulfate and heavy metals. This work uses individual and combinatorial bioaugmentation and bio-stimulation methods to bioremediate acid-mine-influenced groundwater in batch microcosm experiments. Bioaugmentation and bio-stimulation methods included pure culture SRB (Desulfovibrio vulgaris) and microsized oil droplet (MOD) by emulsifying corn oil. The research tested natural attenuation (T 1), bioaugmentation (T2), biostimulation (T3), and bioaugmentation plus biostimulation (T4) for AM-contaminated groundwater remediation. Bioaugmentation and bio-stimulation showed the greatest sulfate reduction (75.3%) and metal removal (95–99%). Due to carbon supply scarcity, T1 and T2 demonstrated 15.7% and 27.8% sulfate reduction activities. Acetate concentrations in T3 and T4 increased bacterial activity by providing carbon sources. Metal bio-precipitation was substantially linked with sulfate reduction and cell growth. SEM-EDS study of precipitates in T3 and T4 microcosm spectra indicated peaks for S, Cd, Mn, Cu, Zn, and Fe, indicating metal-sulfide association for metal removal precipitates. The MOD provided a constant carbon source for indigenous bacteria, while Desulfovibrio vulgaris increased biogenic sulfide synthesis for heavy metal removal.

Exploration of the mechanism of 2-CP degradation by Acinetobacter sp. stimulated by Lactobacillus plantarum fermentation waste: A bio-waste reuse

Green and economical pollution management methods which reusing bio-waste as biostimulant to effectively improve the removal of target pollutants are receiving more and more attention. In this study, Lactobacillus plantarum fermentation waste solution (LPS) was used to investigate its facilitative effect and the stimulation mechanisms on the degradation of 2-chlorophenol (2-CP) by strain Acinetobacter sp. strain ZY1 in terms of both cell physiology and transcriptomics. The degradation efficiency of 2-CP was improved from 60% to > 80% under LPS treatment. The biostimulant maintained the morphology of strain, reduced the level of reactive oxygen species, and recovered the cell membrane permeability from 39% to 22%. It also significantly increased the level of electron transfer activity and extracellular polymeric substances secretion and improved the metabolic activity of the strain. The transcriptome results revealed the stimulation of LPS to promote biological processes such as bacterial proliferation, metabolism, membrane structure composition, and energy conversion. This study provided new insights and references for the reuse of fermentation waste streams in biostimulation methods.

Leaching composition and associated microbial community of recycled concrete aggregate (RCA).

Recycled concrete aggregate (RCA) has been used as an alternative sustainable material in the construction industry, but RCA long-term environmental impacts are unknown. In this study, the bacterial enrichment potential to reduce the alkalinity of two different types of RCA was examined, from laboratory-produced concrete and from a stockpile of demolished concrete that had been in service in transportation applications. Washed and un-washed lab and field RCA were biostimulated by being exposed to ATCC® Medium 661 in batch experiments. pH, metal composition and microbial community changes in the leachates were monitored over time. Results show that initial pH of field RCA leachate could be decreased to less concerning values, as low as 8, but concentrations of some metals in the leachate exceeded groundwater quality standards. However, the biostimulated RCA released lower metal concentration and was more resistant to pH increases than non-biostimulated RCA during a long-term leaching experiment with DI water. The microbial community was enriched on anaerobic, halotolerant and alkaliphile microorganisms, resistant to extreme environmental conditions. The outcome of this research suggests a baseline for field RCA pretreatment before field application, using a biostimulation method that would generate a less environmentally detrimental runoff.

A Review on Bacterial Degradation of Benzo[a]pyrene and Its Impact on Environmental Health

Benzo[a]pyrene is a polycyclic aromatic hydrocarbon (PAH) having a high molecular weight. Benzo[a]pyrene and other PAHs are induces severe acute or chronic human health hazards and are extremely carcinogenic, mutagenic, immunotoxic, and teratogenic. Microorganisms play a crucial part in the degradation of benzo[a]pyrene from polluted environments. Such micro-organisms synthesize monooxygenase and di-oxygenase enzymes that proceed with the aerobic or anaerobic catabolic degradations of benzo[a]pyrene. Bioaugmentation, biomineralization, and biostimulation methods can be used for the decontamination of benzo[a]pyrene from hydrocarbon contaminated sites. In this review paper, we thoroughly explained the impacts of benzo[a]pyrene pollution on human health and the environment. Further, this study also described various pathways regarding the bio-degradation of benzo[a]pyrene and also an updated overview of future prospects of benzo[a]pyrene biodegradation.

Emergence of hydrocarbon-degrading bacteria in crude oil-contaminated soil in a hyperarid ecosystem: Effect of phosphate addition and augmentation with nitrogen-fixing cyanobacteria on oil bioremediation

Hyperarid hot deserts impose limiting conditions for microbial activity, thus delaying crude oil biodegradation resulting from accidental spills. This study examined the emergence of oil-degrading bacterial species in the soil of a hyperarid area in the southern Negev desert, Israel, which was exposed to a major oil spill. Amplicon sequencing of the 16S rRNA gene showed dominance of the phyla Proteobacteria and Actinobacteria in both contaminated and control soils. Significant differences were seen in the abundance of the phylum Firmicutes. Classes Actinobacteria, Gammaproteobacteria and Bacilli dominated the oil-contaminated soil. Bacterial species capable of degrading aromatic and aliphatic oil constituents were isolated from the contaminated soil. Contaminated soil microcosms were amended separately with nitrogen, phosphorus, or nitrogen-fixing cyanobacteria (NFC) biomass; the highest reduction in total petroleum hydrocarbons was observed in the phosphorus-supplemented soil. The abundance of alkB gene, encoding alkane monooxygenase, increased significantly in the control, NFC and phosphate treatments, but not in the nitrogen treatment. However, nahA abundance (coding for naphthalene dioxygenase) was only considerably increased with the phosphorus amendment. While nitrogen amendment via NFC bioaugmentation is a sustainable and novel biostimulation method, phosphorus amendment significantly accelerates the biodegradation of crude oil under extremely arid conditions.

Effect of biostimulation in the bioremediation of waters coming from debittering olives process

• The bioremediation of lye waters is accelerated using biostimulation. • Contamination indicators were reduced by native microorganisms in aerated lye waters. • The decrease in pH was compatible with the possible degradation of organic matter. • Biostimulation is an environmentally friendly solution to reduce pollution. The potential bioremediation of native microorganisms presents in lye waters, produced during the industrial debittering of green table olives was studied in this work. Two treatments, T1 and T2, as well as the corresponding control were carried out, whilst the biostimulation method was evaluated under aerobic conditions. The evolution of parameters such as BOD 5 , COD, electrical conductivity and reducing sugars were measured, whereas the growth of native microorganisms was monitored by total plate count. COD parameter showed a decrease of 100% for both treatments, although electrical conductivity decreased around 35-30% in treatment T1 and 19-30 % in the treatment T2. The initial BOD 5 decreased consistently with the reduction in COD. The controls only had aeration, however in absence of biostimulation, similar results were observed in all treatments, due to the growth of microorganisms stimulated by the native source of organic matter. However, biostimulation accelerated the process, especially in the reduction of pH, transforming the alkaline effluent into a more neutral effluent.

Removal of chlorine-contaminated groundwater by two-stage ozonation and biostimulation methods.

Trichloroethene (TCE) contamination is a critical environmental hazard, and the substrate options for its biostimulated remediation are limited. This study applied an ozonation-and-biostimulation process to remove TCE from groundwater. The substrate used, denoted as Transferred Energy Element (TEE), was composed of natural organic materials and had a low viscosity (2.914cP). Ten batch experiments were conducted through the application of micro-nano bubbles (MNBs) and substrates (TEE and EOS® [emulsified oil substrate]). MNBs with an average diameter of 157.5-180.8nm effectively degraded TCE and dichloroethane within 6min. Biostimulation using the TEE substrate effectively degraded both TCE and vinyl chloride pollutants and reached a steady state after 25 days. The two-stage dechlorination procedure with MNB treatment as the first stage enhanced TCE removal via biostimulation. MNBs reduced the TCE concentration in the first 20min, but increased the chloride (Cl-) concentration over the following five days (∼80mg/L). The procedure with biostimulation as the first stage and 20min ozonation as the second stage reduced the Cl- concentration by ∼10mg/L. The Cl- concentrations rebounded after day 25 in the EOS environment. X-ray diffraction revealed that the released Na+ from the TEE settled with Cl- as minerals in the soil. The novel two-stage method for TCE removal was found to be more effective than solo MNB treatment or biostimulation.

Quantification of Internal Resistance Contributions of Sediment Microbial Fuel Cells Using Petroleum-Contaminated Sediment Enriched with Kerosene

Anaerobic biodegradation of petroleum-contaminated sediments can be accomplished by a sediment microbial fuel cell (SMFC), but the recovered energy is very low (~4 mW m−2). This is due to a high internal resistance (Ri) that develops in the SMFC. The evaluation of the main experimental parameters that contribute to Ri is essential for developing a feasible SMFC design and this task is normally performed by electrochemical impedance spectroscopy (EIS). A faster and easier alternative procedure to EIS is to fit the SMFC polarization curve to an electrochemical model. From there, the main resistance contributions to Ri are partitioned. This enables the development of a useful procedure for attaining a low SMFC Ri while improving its power output. In this study, the carbon-anode surface was increased, the biodegradation activity of the indigenous populations was improved (by the biostimulation method, i.e., the addition of kerosene), the oxygen reduction reaction was catalyzed, and a 0.8 M Na2SO4 solution was used as a catholyte at pH 2. As a result, the initial SMFC Ri was minimized 20 times, and its power output was boosted 47 times. For a given microbial fuel cell (MFC), the main resistance contributions to Ri, evaluated by the electrochemical model, were compared with their corresponding experimental results obtained by the EIS technique. Such a validation is also discussed herein.

Assessment of Biostimulation Methods Based on Chemical Communication in Female Doe Reproduction.

Simple SummaryBiostimulation is a natural technique employed in animal production to enhance reproductive parameters. In this study, we assessed the reproductive efficiency of female rabbits (receptivity, fertility, prolificacy and number of born alive and dead kits/litter) when exposed to different biostimulation conditions, which involved exposure to urine, seminal plasma or social separation between females, prior to artificial insemination (AI). Overall, despite all groups having showed a similar reproductive performance, our results indicated that female–female separation prior to AI could replace social interaction, and therefore reduce animal handling in farms (time–cost efficiency) with a consequent improvement of animal welfare. Future studies are needed to fully elucidate how chemical signals released through bodily secretions influence reproduction.Biostimulation is an animal management practice that helps improve reproductive parameters by modulating animal sensory systems. Chemical signals, mostly known as pheromones, have a great potential in this regard. This study was conducted to determine the influence of short-term female rabbit exposure to different conditions, mainly pheromone-mediated, on reproductive parameters of inseminated does. Groups of 60 females/each were exposed to (1) female urine, (2) male urine, (3) seminal plasma and (4) female–female (F–F) separated, just before artificial insemination, and compared to a ‘golden method’ female–female interaction. The following reproductive parameters were analyzed for each group: receptivity (vulvar color), fertility (kindling rate), prolificacy and number of born alive and dead kits/litter. Our results showed that the biostimulation methods employed in this experiment did not significantly improve any of the analyzed parameters. However, female doe exposure to urine, especially to male urine, showed no significant higher fertility values (95.4%) when compared to the rest of the experimental conditions (on average 92.4%). Female–female interaction before artificial insemination, which is a common practice in rabbit farms, showed similar results as not establishing social interaction (F–F separated), which suggests that F–F interaction could be replaced by F–F separated, therefore avoiding unnecessary animal management and time cost. On the other hand, fertility ranges were lower for animals with a pale vulvar color whereas no differences were noticed among the other three colors which measure receptivity (pink, red, purple), thus suggesting that these three colors could be grouped together. Future studies should aim at determining potential chemical cues/pheromones released through bodily secretions that influence reproduction in rabbits, therefore contributing to animal welfare and to a natural image of animal production.

Augmentation of an Engineered Bacterial Strain Potentially Improves the Cleanup of PCB Water Pollution.

ABSTRACTPolychlorinated biphenyls (PCBs) are recalcitrant organohalide pollutants, consisting of 209 congeners. PCB cleanup in natural landscapes is expected to be achieved by the metabolic activity of microorganisms, but aerobic PCB-degrading bacteria that inhabit sites polluted by PCBs cannot degrade all PCB congeners due to the specificity of their enzymes. In this study, we investigated the degradability of PCBs when a genetically modified PCB-degrading bacterium was compounded with wild-type PCB-degrading bacteria. We used two bacterial strains, Comamonas testosteroni YAZ2 isolated from a PCB-uncontaminated natural landscape and Escherichia coli BL21(DE3) transformed with a biphenyl dioxygenase (BphA) gene from a well-known PCB degrader, Burkholderia xenovorans LB400. The enzymatic specificities of BphA were 2,3-dioxygenation in the YAZ2 and 2,3- and 3,4-dioxygenations in the recombinant E. coli. For the PCB-degrading experiment, a dedicated bioreactor capable of generating oxygen microbubbles was prototyped and used. The combined cells of the recombinant and the wild-type strains with an appropriate composite ratio degraded 40 mg/L of Kaneclor KC-300 to 0.3 ± 0.1 mg/L within 24 h. All of the health-toxic coplanar PCB congeners in KC-300 were degraded. This study suggested that the augmentation of an engineered bacterial strain could improve the cleanup of PCB water pollution. It also revealed the importance of the ratio of the strains with different PCB-degrading profiles to efficient degradation and that the application of oxygen microbubbles could rapidly accelerate the cleanup.IMPORTANCE PCB cleanup technique in a natural environment relies on the use of enzymes from microorganisms, primarily biphenyl dioxygenase and dehalogenase. Herein, we focused on biphenyl dioxygenase and created a recombinant PCB-degrading E. coli strain. Despite the development of environments for the field use of transgenic microbial strains around the world, verification of the applicability of transgenic microbial strains for PCB cleanup in the field has not yet been reported. We tentatively verified the extent to which degradability could be obtained by an augmentation model of a transgenic strain, the enzyme expression of which is easily regulated in rivers and lakes with PCB pollution. Our experiments used a dedicated bioreactor to model the natural landscape and produced results superior to those of bioremediation or biostimulation methods. The application of micro-nano bubbles, which has recently been discussed, to the cleanup of environmental pollution was also found to be useful in this study.

Geotechnical properties of yellow silty sand soil modified by bio-stimulation with presence of NiCl2

Microbiologically induced calcite precipitation (MICP) is now widely tried to improve the quality of mostly sandy soil due to its application prospect to sustainability, environment-friendly and cost-efficiency. The present study is aiming to evaluate the feasibility of bio-stimulation, one of MICP techniques, for strengthening the engineering quality of Shanghai silty sand soil, a special type of soil located in low hillside of west Shanghai, as well as the influence of two factors: CaCl2 as a cementing material and NiCl2 as a co-factor, which was rarely researched before and can be viewed as the influence of urease activity on bio-stimulation result. The direct shear test, unconfined compressive test, supersonic wave test and calcite mass test have been carried out to evaluate engineering performance of yellow silty sand soil enhanced by bio-stimulation method as well as their relationship with concentration of CaCl2 and NiCl2 solutions. The result shows that bio-stimulation method can significantly promote the characteristics of Shanghai yellow silty sand soil and there seems to be extreme point for concentration of CaCl2 and NiCl2 solution in improving the quality of Shanghai yellow silty sand. Microstructure and composition of treated soil by bio-stimulation method have also been analyzed by Scanning Electron Microscope (SEM) and Energy dispersive Spectrometer (EDS), with giving the corresponding micro-mechanism of bio-cementation among soil particles.

Native Bacterial Community Convergence in Augmented and Stimulated Ureolytic MICP Biocementation.

Microbially induced calcite precipitation is a biomineralization process with numerous civil engineering and ground improvement applications. In replicate soil columns, the efficacy and microbial composition of soil bioaugmented with the ureolytic bacterium Sporosarcina pasteurii were compared to a biostimulation method that enriches native ureolytic soil bacteria in situ under conditions analogous to field implementation. The selective enrichment resulting from sequential stimulation treatments strongly selected for Firmicutes (>97%), with Sporosarcina and Lysinibacillus comprising 60 to 94% of high-throughput 16S rDNA sequences in each suspended community sample. Seven species of the former and two of the latter were present in greater than 10% abundance at different times, demonstrating unexpected within-genus diversity and robustness in the suspended phase of this highly selective environment. Based on longer 16S sequences, it was inferred that augmented S. pasteurii competed poorly with natural bacteria, decreasing to below detection after nine treatments, while the native microbial community was enriched to approximately that present in the stimulated columns. These analyses were corroborated by the observed convergence in bulk ureolytic rates and calcite contents between techniques. However, a 10-fold discrepancy between the observed cell density and an activity-based estimate indicates the attached community, uncharacterized despite efforts, substantially contributes to bulk behavior.

Oil bioremediation in soils contaminated with oil spills in tropical environments.

Bioremediation techniques like bioaugmentation and/or biostimulation are an economical and environmentally friendly procedure which emerged as the most advantageous methodology for treatment of contaminated sites by oil spills pollutants. This research uses a tropical soil contaminated with oil based drilling fluids (OBMs) and drill cuttings were evaluating at laboratory scale. Seven treatments were implemented separately: (C) control; (A) natural attenuation; (B) compost (Bs) nutrients; (BsT) nutrients and tween 80; (BsTL) nutrients, tween 80, leonardite, and (BL) nutrients, tween 80, leonardite and d-limonene. For three months, changes in Total Petroleum Hydrocarbons (TPH) soil microbial counts and activity were monitored as indicators of biodegradation. In order to evaluate the efficiency of treatments in the microcosm experiments. After 90 days of incubation hydrocarbon biodegradation is 76.2% (C), 28.6% (A), 76.2% (B), 66.7% (Bs), 83.3% (BsT), 69% (BsTL) and 88.1% (BL), respectively. Scanning electron microscopy (SEM) of OBMs evidenced absence of heavy metals. Biodiversity analysis showed a decrease in bacterial diversity and a rise in tolerant genus of hydrocarbons such as Nocardiodes, Streptomyces, Dietzia and Advenella. The co-substrate and stimulants had synergistic effect on the biological degradation of hydrocarbons. This research suggests that the implementation of bioaugmentation and biostimulation methods will be used a larger scale in contaminated sites.

Bioremediation of Diesel Oil Contaminated Soil by a Novel Isolated Potential Oil Degrading Staphylococcus argenteus MG2 Bacteria Using Bio Stimulation Method

Bioremediation of Diesel Oil Contaminated Soil by a Novel Isolated Potential Oil Degrading Staphylococcus argenteus MG2 Bacteria Using Bio Stimulation Method

Microbial community response to the toxic effect of pentachlorophenol in paddy soil amended with an electron donor and shuttle

Understanding the degradation of pentachlorophenol (PCP) by indigenous microorganisms stimulated by an electron donor and shuttle in paddy soil, and the influences of PCP/electron donor/shuttle on the native microbial community are important for biodegradation and ecological and environmental safety. Previous studies focused on the kinetics and the microbial actions of PCP degradation, however, the effects of toxic and antimicrobial PCP and electron donor/shuttle on the microbial community diversity and composition in paddy soil are poorly understood. In this study, the effects of PCP, an electron donor (lactate), and the electron shuttle (anthraquinone-2, 6-disulfonate, AQDS) on the microbial community in paddy soil were investigated. The results showed that the presence of PCP reduced the microbial diversity compared to the control during PCP degradation, while increased the microbial diversity was observed in response to lactate and AQDS. The addition of PCP stimulated the microorganisms involved in PCP dechlorination, including Clostridium, Desulfitobacterium, Pandoraea, and unclassified Veillonellaceae, which were dormant in raw soil without PCP stress. In all of the treatments with PCP, the addition of lactate or AQDS enhanced PCP dechlorination by stimulating the growth of functional groups involved in PCP dechlorination and by changing the microbial community during dechlorination process. The microbial community tended to be uniform after complete PCP degradation (28 days). However, when lactate and AQDS were present simultaneously in PCP-contaminated soil, lactate acted as a carbon source or electron donor to promote the activities of microbial community, and AQDS changed the redox potential because of the production of reduced AQDS. These findings enhance our understanding of the effect of PCP and a biostimulation method for PCP biodegradation in soil ecosystems at the microbial community level, and suggest the appropriate selection of an electron donor/shuttle for accelerating the bioremediation of PCP-contaminated soils.

Removal of Iron using Isolated Bacteria (Vibrio alginolyticus) in seawater at Ship Dismantling Area

The ship dismantling activity can cause heavy metal pollution in the environment. One of technology to remediate is bioremediation using bioaugmentation and/or biostimulation methods. The purpose of this research was to determine the removal of iron by Vibrio alginolyticus and nutrient addition. Vibrio alginolyticus was halophilic bacteria that isolated from seawater at this area. The laboratory test was conducted using size erlenmeyer of 250 mL. The 5% (v/v) of Vibrio alginolyticus suspension was added in each reactor. After that, the nutrient with ratio of C : N : P (100 : 10 : 1) also was added in each reactor. The removal test was carried out for 14 days. Concentration of iron was analyzed using Atomic Absorption Spectrophotometers (AAS). Based on the results, the percentage of iron removal at location 1 with treatment was 94.9 ± 3.6%. It showed a higher value than compared to iron removal at control 1 which was only 50.4±1.8 %. Whereas at location 2, the percentage of iron removal with treatment reached 53.7±13.1% and it was only 16.7±13.1% at control 2. This indicated that the treatment of the addition of Vibrio alginolyticus and nutrients can improve the iron remediation process.

MIKROORGANISME PENDEGRADASI TPH (TOTAL PETROLEUM HYDROCARBON) SEBAGAI AGEN BIOREMEDIASI TANAH TERCEMAR MINYAK BUMI (Review Article)

Exploitation and exploration activities will produce sewage sludge and crude oil spills that cause pollution to the environment and upgrading to the environment, biology and soil chemistry. Monitoring of oil pollution conditions on the soil can be done by detection of all hydrocarbon components, or what is called the total petroleum hydrocarbon (TPH). According to its components, this total petroleum hydrocarbon (TPH) can be classified into 3 points, aliphatic, alicyclic, and aromatic. One of the biological efforts that can be used to overcome petroleum pollution is by using bioremediation technology. There are several methods in bioremediation, one of which is the biostimulation method, where the growth of the original hydrocarbon decomposers is stimulated by adding nutrients, oxygen, pH optimization and temperature. Hydrocarbonoclastic microorganisms have characteristic not possessed by other microorganisms, namely their ability to excrete hydroxylase enzymes, which are hydrocarbon oxidizing enzymes, so that these bacteria can degrade petroleum hydrocarbons. Biodegradation can be formed if there is a structural transformation so that cahnges in molecular integrity occur. This process is a series of enzymatic or biochemical reaction that require ideal environmental conditions with the growth and proliferation of microorganisms. Something that need to be known before remediation are pollutants (organic or inorganic), degraded/ not, dangerous/ not, how many pollutants pollute the soil, the ratio of carbon (C), Nitrogen (N), and phophorus (P), soil type, soil conditions (wet dry), and how long pollutants have been deposited in these locations

Effect of different biostimulation methods on endocrinological profiles of mithun bulls

A study was conducted to assess the effect of biostimulation methods on endocrinological profiles of mithun bulls. Adult male (6, 4–5 year old) with good body condition score (5–6) from herd of mithun farm of the institute were selected for the present study. The biostimulation methods were grouped into 9 groups and each group consisted of 6 animals, viz. Gr 1 (without exposure of female), Gr 2 (exposure of urine of non-estrus female), Gr 3 (exposure of urine of estrus female), Gr 4 (exposure of dung of non-estrus female), Gr 5 (exposure of dung of estrus female), Gr 6 (exposure of sweat of non-estrus female), Gr 7 (exposure of sweat of estrus female), Gr 8 (exposure of nonestrus female) and Gr 9 (exposure of estrus female). Exposure to each group was done with the interval of 1 month. The experiment was replicated 3 times. Blood samples were collected 15 min after exposure to the different methods of biostimulation for estimation of testosterone, thyroxine (T4) and cortisol, and at 30 min for follicle stimulating hormone (FSH) and luteinizing hormone (LH). Hormone profiles revealed a significant difference among the different methods of biostimulation in mithun bulls. The hormone profiles were significantly higher in adult mithun bulls that were exposed to estrus female followed by exposed to urine, dung, sweat of estrus female and lowest was observed in secretions of non-estrus animal groups. Through this investigation, a suitable model was developed to improve the endocrinological profiles by use of biostimulation techniques in mithun bulls which inturn will indirectly support will to higher semen production and its quality for artificial breeding programme.

Low effect of phenanthrene bioaccessibility on its biodegradation in diffusely contaminated soil

This study focused on the role of bioaccessibility in the phenanthrene (PHE) biodegradation in diffusely contaminated soil, by combining chemical and microbiological approaches. First, we determined PHE dissipation rates and PHE sorption/desorption isotherms for two soils (PPY and Pv) presenting similar chronic PAH contamination, but different physico-chemical properties. Our results revealed that the PHE dissipation rate was significantly higher in the Pv soil compared to the PPY soil, while PHE sorption/desorption isotherms were similar. Interestingly, increases of PHE desorption and potentially of PHE bioaccessibility were observed for both soils when adding rhamnolipids (biosurfactants produced by Pseudomonas aeruginosa). Second, using 13C-PHE incubated in the same soils, we analyzed the PHE degrading bacterial communities. The combination of stable isotope probing (DNA-SIP) and 16S rRNA gene pyrosequencing revealed that Betaproteobacteria were the main PHE degraders in the Pv soil, while a higher bacterial diversity (Alpha-, Beta-, Gammaproteobacteria and Actinobacteria) was involved in PHE degradation in the PPY soil. The amendment of biosurfactants commonly used in biostimulation methods (i.e. rhamnolipids) to the two soils clearly modified the PHE sorption/desorption isotherms, but had no significant impact on PHE degradation rates and PHE-degraders identity. These results demonstrated that increasing the bioaccessibility of PHE has a low impact on its degradation and on the functional populations involved in this degradation.