Bio-based Materials Research Articles

Manufacture of Bioplastics Prepared from Chitosan Functionalized with Callistemon citrinus Extract.

The exploration of natural resources in bioplastics has advanced the development of bio-based materials. Utilizing the casting, chitosan (CH)-based films were manufactured with different glycerol (GLY) percentages (from 0 to 50% w/w of CH) and anthocyanin-enriched fractions (from 0 to 5% of w/w CH) of acidified ethanol extract of Callistemon citrinus flowers (CCE). Callistemon citrinus is an ornamental plant known for its bioactive compounds endowed with health benefits. The hydrocolloid films showed promising mechanical properties. The 30% GLY + 5% CCE film achieved an elongation at break of 57.4%, comparable to the 50% GLY film while possessing enhanced tensile strength and Young's modulus. The CCE, rich in antioxidants, acted as a plasticizer, improving films' flexibility and manageability. The films exhibit hydrophilic characteristics with moisture content and uptake values reflecting their water-absorbing capacity, while films with 30% GLY and 5% CCE exhibit enhanced hydrophobicity. In addition, CCE characterization reveals significant polyphenol content (734.45 mg GAE/g), highlighting its antioxidant capacity. Moreover, CCE supplies remarkable antioxidant properties to the films. These findings suggest the potential of these bioplastics for industrial applications as a sustainable solution to traditional plastics and in reducing environmental impact while preventing oxidative reactions in packaged products.

Unveiling bisphenol A toxicity: human health impacts and sustainable treatment strategies

Abstract Introduction The widespread presence of bisphenol-A (BPA) in consumer goods like water bottles and eyeglass frames raises serious concerns about the chemical’s ability to accumulate in human tissues. Molecular filtration and activated carbon adsorption are two of the many BPA treatment technologies that have emerged in response to these issues; both are essential in the removal or degradation of BPA from water sources and industrial effluents. Content To secure the long-term health and environmental advantages of BPA treatment approaches, sustainable development is essential. Both the efficient elimination or destruction of BPA and the reduction of the treatment operations’ impact on the environment are important components of a sustainable approach. Different search engines like Pub-Med, MEDLINE, Google Scholar and Scopus are used for these systematic reviews and analyzed accordingly. This can be accomplished by making treatment facilities more energy efficient and using environmentally friendly materials. Greener ways to deal with BPA pollution are on the horizon, thanks to innovative techniques like bioremediation and improved oxidation processes. Reducing dependence on conventional, resource-intensive procedures can be achieved by investigating the use of bio-based materials and natural adsorbents in treatment processes. Summary and Outlook This review article tackling the health and environmental concerns raised by BPA calls for an integrated strategy that incorporates sustainable development principles and technology progress. We can reduce the negative impacts of BPA contamination, improve environmental stewardship in the long run, and ensure human health by combining cutting-edge treatment technologies with sustainable behaviours.

Reducing the land-use impact of wooden buildings with fast-growing biobased materials: A Danish case study

This study explores the potential of the reduced demand for land and increase in biogenic CO2 storage for incorporating crop-based products in wooden buildings. It uses case studies to create a material-flow analysis of future Danish building stock with four market-implementation scenarios. Alternative biobased materials show reductions in the land requirements and improved CO2 storage, especially for single-family and multifamily houses. This causes a decrease of 50–61 % in the use of wooded land. Danish straw can supply almost a 50 % implementation, rising to 100 % when combined with grass materials. Building designers and planners are encouraged to prioritize fast-growing biobased materials to minimize the requirements for land in wooden buildings. To achieve this, policy-makers should harmonize inclusive biobased building codes, upskill the workforce and financially support pre-approved solutions. Equally important is to investigate the cross-sectoral synergies between construction and agriculture to govern land for its enhanced environmental and social benefits.

A robust bio-based polyurethane employed as surgical suture with help to promote skin wound healing

Designing bio-based polyurethane materials with excellent mechanical, biocompatibility, and self-healing properties simultaneously is currently a significant challenge due to the increasing demands for high-performance materials. In this study, we propose an asymmetric backbone strategy utilizing bio-based polycarbonate as the soft segment, equimolar ratios of lysine diisocyanate and isophorone diisocyanate as asymmetric hard segments, and isophorone diamine as the chain extender. The resulting polyurethane elastomers exhibit excellent mechanical properties, including high tensile stress (46.1 MPa), toughness (213.9 MJ/m3), and fracture energy (98.47 kJ/m3). The polyurethane elastomers demonstrate good self-healing and recyclable properties under simple heat treatment. Furthermore, biological experiments confirm the degradability and bio-safety of the bio-based polyurethane elastomers, which have shown potential in accelerating wound healing in mice when used as surgical sutures. These findings highlight the promising prospects of the obtained polyurethane elastomers in various applications, including biomedicine, flexible sensing, and electronic components.

Bypassing halide immobilization with cooperative polymers for the cycloaddition of atmospheric CO2 to epoxides

Atom-economic syntheses of cyclic organic carbonates by cycloaddition of CO2 to epoxides have risen to prominence among various approaches for CO2 fixation. In current literature, there is a general lack of recyclable fully heterogeneous organocatalytic systems which are active under mild conditions (T≤60 °C, atmospheric pressure), and that do not involve elaborated synthetic steps for the synthesis of monomers or the coimmobilization of active sites such as hydrogen bond donors (HBDs) and halide nucleophiles. From the standpoint of cost reduction and sustainability, it is also highly desirable to obtain the catalytic materials from biobased sources, especially waste materials. To address such gaps in the literature, we disclose in this work that a lignin derivative (phenolated lignin, PL) can be used as HBD in cooperation with readily available ionic polymers to form recyclable heterogeneous catalytic systems able to carry out the target cycloaddition reaction under atmospheric pressure at 60 °C. This unprecedented approach allows the upcycling of readily available biobased materials for the mild synthesis of cyclic carbonates from CO2 and bypasses the need for elaborated synthetic procedures for the synthesis of coimmobilized HBD-halide systems. PL/QPBAE (quaternized polyaminoester) emerged among various PL/ionic polymer pairs as the most active and efficient catalyst. Such a result is justified through a spectroscopic and analytical investigation as an effect of the ability of PL and QPBAE to closely interact and disperse in the reaction medium, and of the higher flexibility of QPBAE compared to other ionic polymers such as quaternized polyvinylpyridine. The resulting catalytic pair can be used as an efficient recyclable system for the cycloaddition of CO2 to several epoxides under atmospheric conditions with a catalytic performance that compared very well to that of more complex oil-based state-of-the-art polymeric organocatalysts for the same reaction.

MXene quantum dots modified pitaya peel-based composite phase change material with excellent thermal properties for building energy efficiency applications

Bio-based materials have attracted much attention because their application in the construction field is conducive to energy saving and emission reduction. In this paper, a bio-based composite phase change material (CPCM) was prepared by utilizing pitaya peel as a bio-based material, MXene quantum dots (MQDs) as a modified material, and polyethylene glycol (PEG) as a phase change medium. MXene quantum dots dispersed in the pitaya peel-based porous carbon skeleton enhanced the three-dimensional thermal conductivity network of the porous carbon skeleton somewhat improved the thermal conductivity (0.676 W/mK) of the polyethylene glycol/MXene quantum dots-modified pitaya peel-based porous carbon foam (PPF) composite phase change material (PEG/PPF@M). It is worth noting that PEG/PPF@M has excellent thermal stability and its enthalpy is basically unchanged after 100 cycles, which proves the recyclable stability of PEG/PPF@M in practical applications. PEG/PPF@M has great potential for thermal management of buildings and electronic components. Overall, a novel multifunctional CPCM was prepared in this study using a simple process method, which can not only be applied in electronic products to improve the service life of electronic components, but also in the field of construction to realize energy saving and emission reduction, as well as the recycling and reuse of waste.

Development of a multifunctional bio-based insulation material with corncob and silica aerogel

Bio-based insulation materials with superior comprehensive properties are crucial to building energy conservation. This study aims to develop a multifunctional bio-based insulation material that integrates good insulation, mechanical strength, and waterproofing. In this work, using corncob as the raw material, foamed geopolymer as the binder, silica aerogel and silicone oil as additives, a novel bio-based insulation material was prepared. Moreover, the effect of corncob size, silica aerogel content and silicone oil content on the microstructure, density, thermal conductivity, compressive strength, water absorption, moisture absorption and water contact angle properties were discussed. The results showed that, a desirable bio-based insulation material with a corncob size of 20 mesh, silica aerogel/geopolymer mass ratio (A/G) being 1.71 %, silica aerogel/ silicone oil mass ratio (A/O) being 0.2, is recommended, of which the thermal conductivity is 0.111 W/(m.K) with the compressive strength being 2.2 MPa, the density being 350 kg/m3, the water absorption being 7.1 %, the moisture absorption being 9.4 % and the water contact angle being 133°. With a simple preparation process, low cost and low energy consumption, this bio-based insulation material has good application prospects in buildings. Meanwhile, the preparation method of bio-based insulation materials proposed in this study provides new ideas for the development of multifunctional insulation materials in the future.

Thermal performance and Feasibility Study Using a Straw-Based Thermal Insulation in Geothermal systems

Straw is the part of the stem (or stubble) of certain grasses, known as "straw cereals", and is most often a by-product or waste product of cereal production. In northern Algeria, it is produced in all cereal growing regions. It is generally used for animal feed. In this study, straw waste is used as a bio-material for thermal insulation in bioclimatic constructions and especially in geothermal applications, and the thermal insulation needs in a geothermal system is discussed. Furthermore, thermal performance of wheat straw aggregates bio-based material is tested for several thicknesses until stable results are achieved, using conduction heat transfer tests or heating flat plate. This method is based on the temperature difference measuring across the sample (inlet and outlet) and finally, compared it with other commercial geothermal insulation materials. Obtained results give us an idea of the energy gains to be expected from the bio-based materials manufacture to be used in geothermal systems comparing to conventional materials. It is noted that, the optimum thickness of the insulation material based on straw is 2cm, giving a temperature gradient around 9°C versus 16°C for conventional materials. Straw organic waste material is a promising candidate as an alternative insulating material for low-carbon and green buildings targets. Which are in line with the objectives set by the Algerian government as part of the fight against climate change, in particular the development of renewable energies, the promotion of energy efficiency as well as clean technologies and waste recycling.

Biobased Construction from Agricultural Crops: Paper 1 - A State of Play of Commercial Solutions in Europe

In response to environmental concerns and the global warming issue in particular there is a growing drive to decarbonise the building sector and transition it to more circular practices. Biobased construction materials, products and systems are an important low carbon and circular strategy as they can enable low to negative carbon construction and have strong circularity advantages notably being able to enter the bio cycle, using renewable, low to zero toxic resources and provide a range of other performance benefits, including moisture and vapour regulation. This novel research presents a unique state of play on the commercial application of biobased construction from selected agricultural crops, straw, miscanthus and hemp, focused on the European context. A desk-based review of known biobased material producers and manufacturers is undertaken, supplemented with semi structured interviews and site visits, to provide a comprehensive overview of the sector and detailed account of the types of biobased materials, products and systems that are being applied in buildings across Europe and beyond. The findings show that a diversity of agricultural crops are being utilised at different process, manufacture and construction technology levels, providing a range of tested and certified materials and products for application in mainly timber frame construction, but also some masonry solutions, and a growing number of modular systems. These operate in a diversity of supply chains and are being applied in a wide range of building types, both domestic and non-domestic, including multi story and complex buildings.

Damage and fracture studies of continuous flax fiber-reinforced composites 3D printed by in-nozzle impregnation additive manufacturing

Additive manufacturing (AM) of continuous yarn-reinforced biobased composites presents multi-functional properties and low environmental impact of this technology. Few studies focused on the mechanical damage mechanisms of continuous biobased composites obtained by AM processes, while it is a topic of high interest for the mastery of mechanical behaviors and optimization of the materials for high requirement applications. This study aims to assess the damage and fracture modes of continuous flax yarn-reinforced PLA manufactured by AM, with different yarn orientations. The additively manufactured biobased composites were characterized by tensile test, 3D microscopy and micro-tomography to link the process-structure-properties relationships regarding the damage and fracture modes. The results showed that the 0° manufactured composite had a significant enhancement of tensile properties compared to other configurations. The damage mechanism presented fiber rupture with polymer transverse cracks at 0°, while the 45° and 90°-oriented composites showed premature fiber/matrix interface debonding. This study aims to find the relationship between damage mechanisms, deposition strategy, and anisotropy of the additively manufactured long vegetal fibers-reinforced biobased composite materials. The results bring a new understanding of the anisotropy and defects in printed composite materials regarding their mechanical behaviors during damage.

SLA printing of shape memory bio-based composites consisting of soybean oil and cellulose nanocrystals

ABSTRACT Improving the sustainability and processability of shape memory composites is key to expanding their applications. This work introduces a novel bio-based shape memory composite resin with renewable cellulose nanocrystals, suitable for stereolithography (SLA) printing. We prepared epoxy soybean oil-based composites by incorporating Itaconic acid monomethyl ester (IAME) modified cellulose nanocrystals (CNCs-IAME) into IAME modified epoxy soybean oil (IESO). The CNCs-IAME/IESO composite resin, with a viscosity of 1.01–1.22 Pa•s, is ideal for SLA printing. Adding 0.75 wt% CNCs-IAME particles enhances mechanical properties, yielding a tensile strength of 19.54 MPa and elongation at a break of 34.03%. Demonstrated applications include flexible supports and temperature-responsive sensors. This innovative composite offers excellent sustainability and SLA-printability, showing great potential for new bio-based heat-activated shape memory materials.

Enhancing electricity generation from water evaporation through cellulose-based multiscale fibers network

Harvesting energy from the water − solid interface through natural water evaporation provides a promising approach for generating sustainable electricity to power self-powered electronics. Advancing the bio-based hydrovoltaic materials enhances sustainability, with wood as a viable candidate due to the inherent hydrophilic and charged properties. However, current wood-based water evaporation-induced electricity generators (WEIGs) mainly depend on the “top-down” construction strategies. Wherein, the improvement of power density is constrained by the limited structural regulation, nondiverse building blocks, and monolithic enhancement mechanisms. Here, the high-performance wood-based WEIGs based on multiscale fibers network (MFN) are reported by embedding the Ti4O7 nanofibers (T4NF) inside the assemblies of TEMPO-oxidized cellulose nanofibrils (TOCNF) through a “bottom-up” route. Benefiting from the large specific surface area, high surface potential, and photothermal effect of conductive T4NF, the WEIG achieves a high short-circuit current of ∼13.7 μA while delivering ∼0.94 V open-circuit voltage. This work presents an efficient method to boost performance while understanding the impact of functional MFN on water evaporation.

Performance of A Triboelectric Nanogenerator Utilising Coconut Husk Layer

Triboelectric nanogenerators, known as TENGs, offer great potential as versatile energy harvesting devices. In recent years, there has been a rise in TENG designs that prioritize compatibility with sustainable biomaterials, leading to new possibilities in green technology. The novelty of this work lies in its pioneering exploration of utilizing sustainable biomaterials, particularly coconut husk, within the field of Tribo-electric nanogenerators (TENGs). This study focuses on evaluating and characterizing coconut husk as TENG material considering factors such as rotational speed, vane count, and coarseness, all of which influence the output potential of the B-TENG. The B-TENG model employed in this research operates on a rotational sliding mode, featuring a biobased material layer of coconut husk, a layer of PTFE, and copper as electrodes. The B-TENG has a diameter of 100 mm with varying vane configurations (3-vane, 4-vane, and 5-vane). The sliding mode demonstrated impressive versatility, yielding output voltages spanning from 0.73 V to 4.0 V across rotational speeds of 200 RPM to 1400 RPM. Remarkably, the 5-vane fine-grained coconut husks achieved a maximum power of 121.10 mW at 10 Ohm and a power density of 3.84 mW/cm2. This research carries global significance, contributing to the advancement ofenergy harvesting technology. Its applications range from harnessing the motion of human bodies to rotating machineries in any industry.

Efficient Bio-Based Insulation Panels Produced from Eucalyptus Bark Waste

Traditional thermal insulation panels consume large amounts of energy during production and emits pollutants into the environment. To mitigate this impact, the development of bio-based materials is an attractive alternative. In this context, the characteristics of the Eucalyptus fiber bark (EGFB) make it a candidate for insulation applications. However, more knowledge about the manufacturing process and in-service performance is needed. The present study characterized the properties that determine the in-service behavior of the EGFB insulation panel. The assessment involved two different manufacturing processes. The results indicated that the hot plates and the saturated steam injection manufacturing system can produce panels with similar target and bulk density. The thermal conductivity fluctuated between 0.064 and 0.077 W/m·K, which indicated good insulation, and the values obtained for thermal diffusivity (0.10–0.37 m mm2/s) and water vapor permeability (0.032–0.055 m kg/GN s) are comparable with other commercially available panels. To guarantee a good in-service performance, the panels need to be treated with flame retardant and antifungal additive. The good performance of the panel is relevant because bio-based Eucalyptus bark panels generate less CO2 eq and require less energy consumption compared to traditional alternatives, contributing to the sustainability of the forestry and the construction industry.

Natural fibers for performance boosting of BaTiO3-PDMS flexible piezoelectric composite generators

Among biobased materials, date palm leaf fiber (DPLF) is a cellulose-rich fiber with considerable potential for use in sustainable composites, where it can improve mechanical properties and reduce weight. In this study, a flexible piezoelectric generator (PEG) composed of a polydimethylsiloxane (PDMS) polymer, lead-free barium titanate (BaTiO3), and DPLF are presented. A comparative analysis assessed the impact of incorporating DPLF through morphological, mechanical, and electrical evaluations. The results indicate that DPLF improves the performance of the PEG while maintaining desirable mechanical properties, such as flexibility and durability. The improved performance can be attributed to the enhanced dielectric properties, robustness, and distribution of the piezoceramic particles. PEG (5 wt% DPLF + 15 wt% BaTiO3) exhibits a maximum open-circuit voltage twice that of 15 wt% BaTiO3 PEG (6 V) and an eightfold higher power density (8 μW/cm2). These findings result from an increased dielectric constant of 6.8 and a favorable capacitance of 30 pF. Incorporating cellulose-rich DPLF significantly impacts the electromechanical performance of the PDMS/BaTiO3-DPLF composite due to several beneficial effects, including good particle dispersion, sustainability, improved homogeneity, and improved dielectric properties.

Nuclear Magnetic Resonance (NMR) Assessment of Bio and Crude Oil-Based Rejuvenation

Asphalt binders in pavements lose their stability through aging and eventually fail in the field. Using nuclear magnetic resonance (NMR) to monitor the primary longitudinal relaxation time of asphalt samples and the ratio of material that carries this primary relaxation time has been shown to indicate the impact of ultraviolet (UV) radiation on the aging of asphalt pavements. Longitudinal NMR relaxation was used to investigate two types of proposed asphalt rejuvenators, a bio-oil-based rejuvenator and a crude-oil-based rejuvenator. Two different binders with the performance grades (PG) 64-22 and 76-22 were considered for their interactions with the rejuvenators. After 72 h of exposure to intense UV radiation, specifically designed NMR relaxometry experiments were applied to compare the rejuvenation capabilities of the two rejuvenator samples. The crude oil-based rejuvenator was found to exhibit relaxation times similar to the binder samples while the bio-based material showed relaxation times that pointed to different nuclear hydrogen environments. Both rejuvenators reduced the primary relaxation time of the PG 76-22 binder, which indicates that their stiffness was reduced. Both types of rejuvenators also seemed to prevent the effects of UV aging. Two mechanisms of rejuvenation were identified by NMR relaxometry. The primary relaxation time can be used to indicate a change in stiffness while the primary ratio of the material is tied to oxidative aging. Oxidative aging creates distinct hydrogen environments due to asphaltene aggregation. The bio-based rejuvenator only reduced the binder’s stiffness, while the crude oil-based rejuvenator also reduced the aggregation of asphaltenes. Consequently, the bio-based rejuvenator could be classified as an asphalt softener, while the oil-based material acted like a true rejuvenator.

Bio-based eutectic composite phase change materials with enhanced thermal conductivity and excellent shape stabilization for battery thermal management

Organic phase change materials (PCMs) are commonly used for battery thermal management. Organic petroleum-based PCMs such as paraffin have an adverse effect on environment. Fatty acids as environmentally friendly bio-based PCMs, have enormous potential in sustainable development strategies. Nevertheless, the application of fatty acids in battery thermal management (BTMS) is restricted by the leakage of liquid PCM, poor thermal performance and the improper phase change temperature. We proposed a novel bio-based eutectic composite phase change materials (CPCM) with enhanced thermal conductivity and excellent shape-stabilization, composed of ethylene-vinyl acetate (EVA), Aluminum nitride (AlN), and the eutectic PCM of Lauric acid (LA) and Stearic acid (SA). Significantly, the screened eutectic PCM of LA-SA possesses a suitable phase change temperature(37.03 °C) corresponding to the battery operating temperature, and long-term thermal cycling stability of up to 100 cycles. And the cross-linked structure of EVA effectively encapsulated the eutectic PCM, whose mass only lost below 4% after being heated at 80 °C for 24 h. Simultaneously, the introduction of AlN can greatly improve their heat transfer ability and mechanical properties. LA-SA/EVA/AlN composites with 5 wt% AlN has adequate latent heat of 107.94 J.g−1 and high thermal conductivity of 0.726 W.(m·K)−1 as well as with low flexural strength of 1.72 MPa. Additionally, the proposed CPCM with 5 wt% AlN achieved the maximum temperature of battery below 45 °C during 4C discharging test. It suggested that the CPCM incorporated with AlN is capable effective cooling battery and dissipate energy inside PCM rapidly.

Natural deep eutectic solvents for efficient recovery of bioactive compounds from by-product of industrial hemp processing: Pretreatment, modeling and optimization

Hempseed hull, an underutilized by-product of the hemp processing industry, is a valuable bio-based material. This study aims to optimize phenolic compound extraction by natural deep eutectic solvents (NADES) with enhanced antioxidant properties (DPPH, FRAP, ABTS). By utilizing a chemometric approach, the research was conducted in three stages: selecting high-extractability NADES, identifying crucial extraction variables via screening, and optimizing conditions using response surface methodology (RSM). Fractional factorial experimental design was employed to identify the important variables, while a face-centered central composite experimental design (CCD) was utilized in combination with response surface methodology (RSM) to determine the optimal extraction conditions. The optimal conditions were found using NADES based on L-proline and lactic acid (1:2 ratio) at 39°C for the liquid-solid ratio, 70°C for temperature, and 135 minutes for extraction time. By optimizing extraction conditions this study contributes to advancing our understanding of hempseed hulls' biochemical composition and its potential as bio-based material.

Design and performance assessment of a solar photovoltaic panel integrated with heat pipes and bio-based phase change material: A hybrid passive cooling strategy

This study investigates the effectiveness of an indirect passive cooling solution for photovoltaic (PV) panels using flattened heat pipes (FHPs) and phase change material (PCM). An innovative passive cooling design is proposed to cool a PV panel using multiple FHPs with a thin graphite sheet between the PV panel and the FHPs. Five experimental cases are examined under varying heat flux loads. Case O serves as the baseline with no cooling system, while Cases 1 to 4 feature different configurations of FHPs and aluminum sheets, with PCM heat sinks added in Cases 2 and 4. The investigation focuses on temperature profiles, temperature reductions, and final temperatures of the PV panel, especially at the end of a 4-hour experimental period when the PCM is fully melted. The results show significant temperature reductions in Case 1 compared to the baseline, with further improvement in Case 2 due to the PCM heat sink. Temperature reductions in Cases 2 and 4 are consistently higher than in Cases 1 and 3, demonstrating the enhanced cooling potential of PCM. Case 4 achieves the highest temperature reduction of 37.0 °C, followed by Case 2 with 34.9 °C under a radiative heat flux of 1000 W/m2. Using 4 FHPs (Cases 1 and 2) is economically justified, offering comparable cooling performance to 8 FHPs (Cases 3 and 4), thus ensuring cost-effectiveness and reducing material usage by over 50 %. A maximum enhancement in PV electrical efficiency of 17.3 % is achieved in Case 2 during PCM phase change with a radiative heat flux of 1000 W/m2.

Renewable insulation panels made with Cynodon dactylon grass for building applications: Physical, mechanical, acoustic, and thermal properties

This paper presents a pilot study investigating the manufacturing process and properties of novel bio-based materials intended for insulation in building walls. Panels with a thickness of 20mm were fabricated by mixing grass, water, and potato starch, followed by pressing and heating. Various combinations of coarse, medium, and fine Cynodon dactylon particles, along with three starch-to-water ratios (1:3, 1:4, and 1:5), were explored. The panels underwent characterization in terms of density, quasi-static compressive behavior, quasi-static flexural strength, high-strain compressive strength, sound absorption coefficient, thermal conductivity, and degradation under external environmental conditions. Results indicate that density is influenced by particle size and micro-structure arrangement, while static compressive stiffness is affected by both particle size and starch-to-water ratio. The panels exhibit low damage and effective dissipation under compressive high-strain deformation. The sound absorption test reveals superior capabilities (Class III of ISO 11654:1997) due to the porous structure. Thermal conductivity values ranging from 0.075 to 0.092 Wm−1K−1 support the application as a thermal insulation material. Furthermore, the study demonstrates that reducing particle size and increasing starch-to-water ratio enhance mechanical properties while slightly diminishing acoustic and thermal performance. Under external environmental conditions, the panels lasted more than 1 months, demonstrating acceptable resistance to rain and humidity. Comparative analysis with other natural bio-based materials shows that Cynodon dactylon-starch panels possess similar or superior physical, mechanical, acoustic, and thermal characteristics. These findings suggest that these panels could serve as environmentally friendly alternatives in the insulation materials sector within the building industry.