Exciton Binding Energy Research Articles

Π‐Bridge Modulations in D–π–A Conjugated Microporous Polymers to Facilitate Charge Separation and Transfer Kinetics for Efficient Photocatalysis

AbstractThe burgeoning field of conjugated microporous polymers (CMPs) has generated widespread interest due to their potential as photocatalysts for hydrogen production from water. Nevertheless, their photocatalytic performance is sometimes hindered by inadequate charge separation and transfer, coupled with rapid charge recombination. Herein, a strategy to enhance photocatalytic performance via the customization of π‐bridges through the modulation of heteroatoms in a series of donor‐π‐acceptor (D‐π‐A) CMPs is proposed. This affords optimized energy levels and improved charge separation and transfer, thus boosting photocatalytic efficiency. Among various heteroatom substitutions, S‐doped CMP (10 mg) demonstrates the highest photocatalytic hydrogen evolution rate of 203 µmol h−1 (AQY450nm = 7.4%) under visible light irradiation. Subsequent experimental analysis reveals its superior photocatalytic performance can be largely related to its minimized exciton binding energy, facilitated charge transfer efficiency, and impeded charge recombination among these heteroatom‐doped D‐π‐A CMPs. This research paves the way for the rational design and modification of organic semiconductors for advanced solar‐driven photocatalysis by promoting charge separation and transfer.

Evaluation of Aging Effects of Zinc Oxide on the Optical Properties of Porous Silicon-Zinc Oxide Heterojunction Photodetector Device

Porous silicon is very important for integrated technology because of its many superior properties, such as suitability for mass production, easy and controlled production, and adjustable electrical and optical properties. Semiconductors with metal oxides, such as indium oxide, indium tin oxide, tin oxide, and zinc oxide, are highly preferred in optical devices. Among these metal oxides, zinc oxide is preferred for photodetectors because of its stable crystal structure and large exciton binding energy of 60 meV. Researchers have conducted studies on photodetectors with porous silicon-zinc oxide heterojunction structures. The importance of the stable operation of devices has been emphasized. Therefore, in this study, a porous silicon-based zinc oxide heterojunction structure suitable for photodetector production was formed, and the effect of aging on zinc oxide was investigated over time. As a result of the investigation, it was observed that the intensity decreased approximately 2.5 times at the end of 365 days owing to the aging of zinc oxide. In addition, UV spectroscopy measurements were performed to investigate the optical properties that affect their operation as photodetectors. Because the PS-ZnO heterojunction functions as a detector in the UV region, the absorption and reflectivity of the PS-ZnO heterojunction were investigated, especially in the UV region. From the measurements, it was observed that aging decreased absorption and increased reflectance. These findings underscore the negative impact of aging on photodetector performance.

Confinement of methylammonium lead bromide nanocrystals in metal–organic frameworks as a stable scintillator for high-performance X-ray imaging

The development of perovskite nanocrystals (NCs) based composites with enhanced stability and exceptional photoelectric properties is of great significance for their application in scintillators for X-ray imaging, but it remains challenging. Herein, we demonstrate a novel and stable scintillator, achieved through a host–guest strategy involving the confinement of perovskite NCs, e.g., MAPbBr3 NCs, in metal–organic frameworks (MOFs). The host MOF, bio-MOF-100 (denoted as bMOF), facilitates the in-situ space-confined formation of MAPbBr3 NCs while providing quantum confinement, surface passivation, and protection to these guests. This host–guest strategy results in high exciton binding energy, bright and efficient luminescence, and significantly enhancing their stability against various factors such as air, heat, UV, solvents and X-ray irradiation. Consequently, this advancement prompts the transition of their application scenarios from the colloidal state to the solid state. The bMOF⊃MAPbBr3 scintillator exhibits a linear response to X-ray with a detection limit determined to be 170 nGyair s−1. Moreover, the bMOF⊃MAPbBr3–PMMA scintillator screen demonstrates high-quality X-ray imaging with an impressive spatial resolution of 14.7 lp mm−1. This work provides a new avenue for the development of perovskite NCs-based host–guest composites and paves the way for the broader implementation in solid-state optoelectronic applications.

Multi‐Selenophene Strategy Enables Dimeric Acceptors‐Based Organic Solar Cells with over 18.5% Efficiency

AbstractDimeric acceptor (DMA) becomes a promising alternative to small‐molecular and polymeric acceptor‐based organic solar cells (OSCs) due to its well‐defined chemical structure, high batch‐to‐batch reproducibility, and low molecular diffusion properties. However, DMAs usually exhibit blueshifted absorptions, limiting their photon utilization abilities. Herein, multi‐selenophene strategies are adopted to develop redshifted DMAs. From monomer (YSe) to dimers (DYSe‐1 and DYSe‐2), reduced electron reorganization energies and exciton binding energies enable the efficient charge dynamics in the DMAs‐based OSCs. Together with their effective absorption extending to ≈920 nm, DYSe‐1‐ and DYSe‐2‐ based OSCs exhibit outstanding short‐circuit current densities (JSCs) over 27 mA cm−2, which are the best among DMAs. Besides, compared with the YSe‐based device, both DMA‐based devices have higher electroluminescence quantum efficiencies and thus reduce nonradiative recombination loss (ΔE3), contributing to their reduced energy losses. The resultant open‐circuit voltages (VOCs) of DYSe‐1‐ and DYSe‐2‐ based OSCs are ≈0.88 V, which, combining their super JSC values, lead to the promising power conversion efficiencies of 18.56% and 18.22%, respectively. These results are among the best in DMAs‐based OSCs and highlight the great potential of the multi‐selenophene strategy for the development of redshifted DMAs with high performance.

Temperature-dependent excitonic emission characteristics of highly crystallized carbon nitride nanosheets

Highly-crystallized carbon nitride (HCCN) nanosheets exhibit significant potential for advancements in the field of photoelectric conversion. However, to fully exploit their potential, a thorough understanding of the fundamental excitonic photophysical processes is crucial. Here, the temperature-dependent excitonic photoluminescence (PL) of HCCN nanosheets and amorphous polymeric carbon nitride (PCN) is investigated using steady-state and time-resolved PL spectroscopy. The exciton binding energy of HCCN is determined to be 109.26 meV, lower than that of PCN (207.39 meV), which is attributed to the ordered stacking structure of HCCN with a weaker Coulomb interaction between electrons and holes. As the temperature increases, a noticeable reduction in PL lifetime is observed on both the HCCN and PCN, which is ascribed to the thermal activation of carrier trapping by the enhanced electron–phonon coupling effect. The thermal activation energy of HCCN is determined to be 102.9 meV, close to the value of PCN, due to their same band structures. Through wavelength-dependent PL dynamics analysis, we have identified the PL emission of HCCN as deriving from the transitions: σ*–LP, π*–π, and π*–LP, where the π*–LP transition dominants the emission because of the high excited state density of the LP state. These results demonstrate the impact of high-crystallinity on the excitonic emission of HCCN materials, thereby expanding their potential applications in the field of photoelectric conversion.

High Performance As-Cast Organic Solar Cells Enabled by a Refined Double-Fibril Network Morphology and Improved Dielectric Constant of Active Layer.

High performance organic solar cells (OSCs) are usually realized by using post-treatment and/or additive, which can induce the formation of metastable morphology, leading to unfavorable device stability. In terms of the industrial production, the development of high efficiency as-cast OSCs is crucially important, but it remains a great challenge to obtain appropriate active layer morphology and high power conversion efficiency (PCE). Here, efficient as-cast OSCs are constructed via introducing a new polymer acceptor PY-TPT with a high dielectric constant into the D18:L8-BO blend to form a double-fibril network morphology. Besides, the incorporation of PY-TPT enables an enhanced dielectric constant and lower exciton binding energy of active layer. Therefore, efficient exciton dissociation and charge transport are realized in D18:L8-BO:PY-TPT-based device, affording a record-high PCE of 18.60% and excellent photostability in absence of post-treatment. Moreover, green solvent-processed devices, thick-film (300nm) devices, and module (16.60 cm2) are fabricated, which show PCEs of 17.45%, 17.54%, and 13.84%, respectively. This work brings new insight into the construction of efficient as-cast devices, pushing forward the practical application of OSCs.

High-Quality Data Enabling Universality of Band Gap Descriptor and Discovery of Photovoltaic Perovskites.

Extensive machine-learning-assisted research has been dedicated to predicting band gaps for perovskites, driven by their immense potential in photovoltaics. Yet, the effectiveness is often hampered by the lack of high-quality band gap data sets, particularly for perovskites involving d orbitals. In this work, we consistently calculate a large data set of band gaps with a high level of accuracy, which is rigorously validated by experimental and state-of-the-art GW band gaps. Leveraging this achievement, our machine-learning-derived descriptor exhibits exceptional universality and robustness, proving effectiveness not only for single and double, halide and oxide perovskites regardless of the underlying atomic structures but also for hybrid organic-inorganic perovskites. With this approach, we comprehensively explore up to 15,659 materials, unveiling 14 unreported lead-free perovskites with suitable band gaps for photovoltaics. Notably, MASnBr3, FA2SnGeBr6, MA2AuAuBr6, FA2AuAuBr6, FA2InBiCl6, FA2InBiBr6, and Ba2InBiO6 stand out with direct band gaps, small effective masses, low exciton binding energies, and high stabilities.

Metal Halide Perovskites for Direct X‐Ray Detection in Medical Imaging: To Higher Performance

AbstractThis review discusses the utilization of metal halide perovskite (MHP) materials in X‐ray direct imaging detectors for medical application. Compared to traditional semiconductors, MHP has multiple advantages including high linear attenuation coefficient, low exciton binding energy, long carrier diffusion length, and high carrier mobility. These ascendancies allow for low‐dose and high‐resolution medical imaging. Apartment from a historical overview of the develop‐X‐ray direct imaging detectors and their performance indicators, this review specifically focuses on the development and innovation of X‐ray direct imaging detectors using MHP materials. The article concludes by identifying existing challenges and discussing the potential application of perovskite X‐ray direct imaging detectors in the medical industry.

Oxygen-Vacancy-Mediated Large Binding Energy Exciton Dissociation in Nb3O7(OH) Nanorods with High Electron Mobility for CO2 Photoreduction.

Despite the excellent performance of Nb3O7(OH) in dye-sensitized solar cells and catalysis, its charge separation, transport, and structural properties remain poorly understood. Herein, the Nb3O7(OH) nanorods were prepared, and their structural characteristics, optoelectronic properties, and carrier mobility were also analyzed and investigated through a series of complex characterizations. Theoretical prediction suggested that the exciton binding energy of Nb3O7(OH) could be as high as 100.49 meV. The temperature-dependent photoluminescence (PL) of Nb3O7(OH) nanorods revealed two activation energies, and a higher proportion of long-lived components observed in the photoluminescence decay indicated effective electron trapping. That is, two energy states were present, hindering photogenerated charge recombination and promoting photocatalytic action. Current-voltage characteristics of the Nb3O7(OH) nanorod film were analyzed, revealing an ultrahigh carrier mobility of ∼310 cm2/V·s, ensuring fast and efficient electron transfer. Furthermore, Nb3O7(OH) nanorods were employed to reduce CO2, resulting in the effective production of CO and CH4. Overall, considering the presence of hydroxyl pairs on the surface of Nb3O7(OH), which facilitate the formation of the frustrated Lewis acid-base pairs and the activation of CO2, together with its effective electron trapping and charge transport, give Nb3O7(OH) nanorods a promising potential for CO2 reduction.

Machine learning assisted designing of non-fullerene electron acceptors: A quest for lower exciton binding energy

The designing of acceptors materials for the organic solar cells is a hot topic. The normal experimental methods are tedious and expensive for large screening. Machine learning guided exploration is more suitable solution. Bagging regression, random forest regression, gradient boosting regression, and linear regression are trained to predict exciton binding energy. Breaking Retrosynthetically Interesting Chemical Substructures (BRICS) methodology has utilized for designing of new non-fullerene acceptors (NFAs). The predicted values were used to select the designed NFAs. On the selected NFAs, clustering and chemical similarity analyses are also performed. Chemical fingerprints are used for this purpose, and the synthetic accessibility score of the new NFAs is also investigated.30 NFAs have selected with low exciton binding energy values. This approach will allow for the rapid screening of NFAs for organic solar cells. Our proposed framework stands out as a valuable tool for strategically selecting the most effective NFAs for organic solar cells and offers a streamlined approach for material discovery.

Energy Transfer-Dominated Quasi-2D Blue Perovskite Light-Emitting Diodes.

The bromide-chloride mixed quasi-two-dimensional (2D) perovskite, with a natural quantum well structure and tunable exciton binding energy, has gained significant attention for high-performance blue perovskite light-emitting diodes (PeLEDs). However, the relative importance of having a low trap state density or efficient exciton transfer for high-efficiency electroluminescence (EL) performance remains elusive. Here, two molecules with the benzoic acid group, sodium 4-fluorobenzoate (SFB) and 3,5-dibromobenzoic acid (DBA), are used to modulate the phase distribution and trap state to explore the effect between energy transfer and defect passivation. As a result, when the n = 1 phase is inhibited in both films, the DBA@SFB-modified perovskite films achieve a higher photoluminescence quantum yield (PLQY) than the SFB-modified perovskite films due to effective defect passivation. However, DBA@SFB-modified PeLEDs exhibit lower external quantum efficiency (EQE) compared to SFB-modified PeLEDs due to the poor exciton transfer between the low-dimensional phase. This demonstrates that passivation strategies may enhance photoluminescence through reducing nonradiative recombination, but the effect of phase distribution is pivotal for EL performance by efficient energy transfer in quasi-2D perovskites. Femtosecond time-resolved transient absorption measurements confirm the fastest carrier dynamics in SFB-modified perovskite films, further corroborating the above result. This work provides useful information about phase modulation and defect passivation for high-efficiency blue quasi-2D PeLEDs.

Arising 2D Perovskites for Ionizing Radiation Detection.

2D perovskites have greatly improved moisture stability owing to the large organic cations embedded in the inorganic octahedral structure, which also suppresses the ions migration and reduces the dark current. The suppression of ions migration by 2D perovskites effectively suppresses excessive device noise and baseline drift and shows excellent potential in the direct X-ray detection field. In addition, 2D perovskites have gradually emerged with many unique properties, such as anisotropy, tunable bandgap, high photoluminescence quantum yield, and wide range exciton binding energy, which continuously promote the development of 2D perovskites in ionizing radiation detection. This review aims to systematically summarize the advances and progress of 2D halide perovskite semiconductor and scintillator ionizing radiation detectors, including reported alpha (α) particle, beta (β) particle, neutron, X-ray, and gamma (γ) ray detection. The unique structural features of 2D perovskites and their advantages in X-ray detection are discussed. Development directions are also proposed to overcome the limitations of 2D halide perovskite radiation detectors.

Decoding Excimer Formation in Covalent-Organic Frameworks Induced by Morphology and Ring Torsion.

A thorough and quantitative understanding of the fate of excitons in covalent-organic frameworks (COFs) after photoexcitation is essential for their augmented optoelectronic and photocatalytic applications via precise structure tuning. The synthesis of a library of COFs having identical chemical backbone with impeded conjugation, but varied morphology and surface topography to study the effect of these physical properties on the photophysics of the materials is herein reported. The variation of crystallite size and surface topography substantified different aggregation pattern in the COFs, which leads to disparities in their photoexcitation and relaxation properties. Depending on aggregation, an inverse correlation between bulk luminescence decay time and exciton binding energy of the materials is perceived. Further transient absorption spectroscopic analysis confirms the presence of highly localized, immobile, Frenkel excitons (of diameter 0.3-0.5nm) via an absence of annihilation at high density, most likely induced by structural torsion of the COF skeletons, which in turn preferentially relaxes via long-lived (nanosecond to microsecond) excimer formation (in femtosecond scale) over direct emission. These insights underpin the importance of structural and topological design of COFs for their targeted use in photocatalysis.

Elucidating Solvatochromic Shifts in Two-Dimensional Photocatalysts by Solving the Bethe-Salpeter Equation Coupled with Implicit Solvation Method.

Many studies have focused on tailoring the photophysical properties of two-dimensional (2D) materials for photocatalytic (PC) or photoelectrochemical (PEC) applications. To understand the optical properties of 2D materials in solution, we established a computational method that combined the Bethe-Salpeter equation (BSE) calculations with our GW-GPE method, allowing for GW/BSE-level calculations with implicit solvation described using the generalized Poisson equation (GPE). We applied this method to MoS2, phosphorene (PP), and g-C3N4 and found that when the solvent dielectric increased, it reduced the exciton binding energy and quasiparticle bandgap, resulting in almost no solvatochromic shift in the excitonic peaks of MoS2 and PP, which is consistent with previous experiments. However, our calculations predicted that the solvent dielectric had a significant impact on the excitonic properties of g-C3N4, exhibiting a large solvatochromic shift. We expect that our GW/BSE-GPE method will offer insights into the design of 2D materials for PC and PEC applications.

Exciton polariton condensation from bound states in the continuum at room temperature

Exciton–polaritons (polaritons) resulting from the strong exciton–photon interaction stimulates the development of novel low-threshold coherent light sources to circumvent the ever-increasing energy demands of optical communications1–3. Polaritons from bound states in the continuum (BICs) are promising for Bose–Einstein condensation owing to their theoretically infinite quality factors, which provide prolonged lifetimes and benefit the polariton accumulations4–7. However, BIC polariton condensation remains limited to cryogenic temperatures ascribed to the small exciton binding energies of conventional material platforms. Herein, we demonstrated room-temperature BIC polariton condensation in perovskite photonic crystal lattices. BIC polariton condensation was demonstrated at the vicinity of the saddle point of polariton dispersion that generates directional vortex beam emission with long-range coherence. We also explore the peculiar switching effect among the miniaturized BIC polariton modes through effective polariton−polariton scattering. Our work paves the way for the practical implementation of BIC polariton condensates for integrated photonic and topological circuits.

Use of benzothiophene ring to improve the photovoltaic efficacy of cyanopyridinone-based organic chromophores: a DFT study.

The benzothiophene based chromophores (A1D1-A1D5) with A-π-A configuration were designed via end-capped tailoring with benzothiophene type acceptors using reference compound (A1R). Quantum chemical calculations were accomplished at M06/6-311G(d,p) level to probe optoelectronic and photophysical properties of designed chromophores. Therefore, frontier molecular orbitals (FMOs), binding energy (Eb), open circuit voltage (Voc), transition density matrix (TDM), density of state (DOS) and UV-Vis analyses of A1R and A1D1-A1D5 were accomplished. The designed compounds (A1D1-A1D5) exhibited absorption values in the visible region as 616.316-649.676 nm and 639.753-665.508 nm in gas and chloroform phase, respectively, comparing with reference chromophore. An efficient charge transference from HOMO towards LUMO was found in A1D1-A1D5 chromophores which was further supported by TDM and DOS analyses. Among all chromophores, A1D2 exhibited unique characteristics such as reduced band gap (2.354 eV), higher softness (σ = 0.424 eV), lower exciton binding energy (0.491 eV) and maximum value of open circuit voltage (Voc = 1.981 V). Consequently, A1D2 may be considered as potential candidate for the development of optoelectronic devices. These analyses revealed that the studied compounds exhibited promising findings. They may be utilized in the realm of organic solar cells.

Carbazole-containing covalent triazine frameworks for efficient hydrogen peroxide photosynthesis from natural sunlight

Hydrogen peroxide (H2O2) photosynthesis via polymer photocatalysts is an environmentally friendly and sustainable method for H2O2 production. However, their efficiency is currently unsatisfactory due to limited dissociation and insufficient migration of photogenerated charge carriers. Constructing donor–acceptor (D-A) type polymer photocatalysts has been demonstrated to be a promising approach to improve their optical and electronic properties related to charge carrier separation and migration. Herein, we design two donor–acceptor (D-A) type carbazole-containing covalent triazine frameworks (CTF-PCZs), namely CTF-BPCZ and CTF-TPCZ. These CTF-PCZs are found to reduce the exciton binding energy (Eb) and enhance charge carriers transfer ability compared to non-D-A type CTF-HUST-1. Remarkably, CTF-TPCZ exhibit excellent H2O2 photosynthesis performance, achieving a rate of up to 10331 μmol g−1 h−1 from pure water under solar simulator (AM 1.5G), and 6039 μmol g−1 h−1 from pure water under natural sunlight irradiation in scaled-up photocatalytic experiments, significantly surpass those of all previously reported polymer-based photocatalysts. In-situ experiments provide direct evidence for intermediates involved in the photocatalytic process. Both experiments and DFT calculations reveal that the triazine ring fragment plays a crucial role in H2O2 photosynthesis through a two-step single-electron oxygen reduction reaction (ORR) and the carbazolyl group plays a crucial role in one-step two-electron water oxidation reaction (WOR).

Investigation into the Exciton Binding Energy of Carbon Nitrides on Band Structure and Carrier Concentration through the Photoluminescence Effect

Carbon nitrides form a series of polymer semiconductors popular in photocatalysis. In the course of photoresponse, the separation of light-induced electron–hole pairs is one of the critical factors that affect the conversion rate from photoenergy to chemical substance. Exciton binding energy (Eb) is treated as a classical parameter to evaluate the barrier of exciton dissociation. In this work, we study the electronic and optical nature of two specific members of the carbon nitride family, polymeric carbon nitride (melon) and crystallized poly(triazine imide) (PTI/Li+Cl−) by employing the photoluminescence spectra and density functional theory (DFT) calculations based on the Wannier-Mott exciton module. The results of self-consistent GW computation were applied. The measurement of photoluminescence spectra, by which exciton binding energies are estimated, is likewise discussed. Generally, compared with the results calculated by GW-BSE, the DFT results based on the Wannier-Mott model are closer to the experimental values. From a materials perspective, on the other hand, the exciton binding energy of the melon is lower than that of PTI/Li+Cl−.

Stark Effects of Rydberg Excitons in a Monolayer WSe2 P-N Junction.

The enhanced Coulomb interaction in two-dimensional semiconductors leads to tightly bound electron-hole pairs known as excitons. The large binding energy of excitons enables the formation of Rydberg excitons with high principal quantum numbers (n), analogous to Rydberg atoms. Rydberg excitons possess strong interactions among themselves as well as sensitive responses to external stimuli. Here, we probe Rydberg exciton resonances through photocurrent spectroscopy in a monolayer WSe2 p-n junction formed by a split-gate geometry. We show that an external in-plane electric field not only induces a large Stark shift of Rydberg excitons up to quantum principal number 3 but also mixes different orbitals and brightens otherwise dark states such as 3p and 3d. Our study provides an exciting platform for engineering Rydberg excitons for new quantum states and quantum sensing.

Infrared Imaging Using Thermally Stable HgTe/CdS Nanocrystals.

Transferring nanocrystals (NCs) from the laboratory environment toward practical applications has raised new challenges. HgTe appears as the most spectrally tunable infrared colloidal platform. Its low-temperature synthesis reduces the growth energy cost yet also favors sintering. Once coupled to a read-out circuit, the Joule effect aggregates the particles, leading to a poorly defined optical edge and large dark current. Here, we demonstrate that CdS shells bring the expected thermal stability (no redshift upon annealing, reduced tendency to form amalgams, and preservation of photoconduction after an atomic layer deposition process). The electronic structure of these confined particles is unveiled using k.p self-consistent simulations showing a significant exciton binding energy of ∼200 meV. After shelling, the material displays a p-type behavior that favors the generation of photoconductive gain. The latter is then used to increase the external quantum efficiency of an infrared imager, which now reaches 40% while presenting long-term stability.