Binding Capacity Research Articles

Reactive oxygen-scavenging polydopamine nanoparticle coated 3D nanofibrous scaffolds for improved osteogenesis: Toward an aging in vivo bone regeneration model.

Tissue engineered scaffolds aimed at the repair of critical-sized bone defects lack adequate consideration for our aging society. Establishing an effective aged in vitro model that translates to animals is a significant unmet challenge. The in vivo aged environment is complex and highly nuanced, making it difficult to model in the context of bone repair. In this work, 3D nanofibrous scaffolds generated by the thermally-induced self-agglomeration (TISA) technique were functionalized with polydopamine nanoparticles (PD NPs) as a tool to improve drug binding capacity and scavenge reactive oxygen species (ROS), an excessive build-up that dampens the healing process in aged tissues. PD NPs were reduced by ascorbic acid (rPD) to further improve hydrogen peroxide (H2O2) scavenging capabilities, where we hypothesized that these functionalized scaffolds could rescue ROS-affected osteoblastic differentiation in vitro and improve new bone formation in an aged mouse model. rPDs demonstrated improved H2O2 scavenging activity compared to neat PD NPs, although both NP groups rescued the alkaline phosphatase activity (ALP) of MC3T3-E1 cells in presence of H2O2. Additionally, BMP2-induced osteogenic differentiation, both ALP and mineralization, was significantly improved in the presence of PD or rPD NPs on TISA scaffolds. While in vitro data showed favorable results aimed at improving osteogenic differentiation by PD or rPD NPs, in vivo studies did not note similar improvements in ectopic bone formation an aged model, suggesting that further nuance in material design is required to effectively translate to improved in vivo results in aged animal models.

Effects of Glycosylation Combined with Phosphate Treatment on the Allergenicity and Structure of Tropomyosin in Litopenaeus vannamei.

Tropomyosin (TM) is the main allergen in shrimp (Litopenaeus vannamei). In this study, the effects of allergenicity and structure of TM by glycosylation (GOS-TM), phosphate treatment (SP-TM), and glycosylation combined with phosphate treatment (GOS-SP-TM) were investigated. Compared to GOS-TM and SP-TM, the IgG/IgE binding capacity of GOS-SP-TM was significantly decreased with 63.9 ± 2.0 and 49.7 ± 2.7%, respectively. Meanwhile, the α-helix content reduced, surface hydrophobicity increased, and 10 specific amino acids (K30, K38, S39, K48, K66, K74, K128, K161, S210, and K251) were modified by glycosylation on six IgE linear epitopes of GOS-SP-TM. In the BALB/c mice allergy model, GOS-SP-TM could significantly reduce the levels of specific IgE, IgG1, and CD4+IL-4+, while the levels of IgG2a, CD4+CD25+Foxp3+, and CD4+IFN-γ+ were increased, which equilibrated Th1 and Th2 cells, thus alleviating allergic symptoms. These results indicated that glycosylation combined with phosphate treatment can provide a new insight into developing hypoallergenic shrimp food.

A Rational Approach To Antitubercular Drug Design: Molecular Docking, Prediction of ADME Properties and Evaluation of Antitubercular Activity of Novel Isonicotinamide Scaffold.

One of the most devastating and leading diseases is Tuberculosis (TB), caused by Mycobacterium tuberculosis. Even though many synthetic drugs are available in the market, to increase the therapeutic efficacy and reduce toxicity. Isoniazid is the primary drug used in the treatment of tuberculosis. The main objective of the study is to perform molecular docking studies and synthesize the derivatives of isonicotinamide along with the anti-tubercular activity. The isonicotinamide derivatives (a-j) are prepared using isoniazid, carbon disulphate, methyl cyanide, and benzaldehyde derivatives and characterized by TLC, IR, 1HNMR, and Mass spectroscopy. The enzyme decaprenylphosphoryl-D-ribose oxidase (DprE1) of M. tuberculosis had good binding capacity with all the ligands revealed in molecular docking studies. In-vitro studies indicated that all the ligands showed anti-tuberculosis with strain M. tuberculosis. The analysis was based on the binding energy and minimum inhibitory concentration (MIC). The highest and lowest binding energy is -4.22 Kcal/mol (f) and -8.45 Kcal/mol (d), and the MIC for compound d was found to be 644.22 nM. Among all the ligands, compound 5d has the most cytotoxic effect and lower IC50 values and better bioavailability. This investigation helps in the development of better anti-tubercular therapy.

Enhancing the therapeutic potential of P29 protein-targeted monoclonal antibodies in the management of alveolar echinococcosis through CDC-mediated mechanisms.

Alveolar echinococcosis (AE) is a highly lethal helminth infection. Current chemotherapeutic strategies for AE primarily involve the use of benzimidazoles (BZs) such as mebendazole (MDZ) and albendazole (ABZ), which exhibit limited efficacy. In a previous study, the vaccine of recombinant Echinococcus granulosus P29 (rEgP29) showed significant immunoprotection against E. granulosus in both mice and sheep. In the current study, we utilized hybridoma technology to generate five monoclonal antibodies (mAbs) against P29, among which 4G10F4 mAb exhibited the highest antigen-specific binding capacity. This mAb was selected for further investigation of anti-AE therapy, both in vivo and in vitro. In vitro, 4G10F4 inhibited a noteworthy inhibition of E. multilocularis protoscoleces and primary cells viability through complement-dependent cytotoxicity (CDC) mechanism. In vivo, two experiments were conducted. In the first experiment, mice were intraperitoneally injected with Em protoscoleces, and subsequently treated with 4G10F4 mAb (2.5/5/10 mg/kg) at 12 weeks postinfection once per week for 8 times via tail vein injection. Mice that were treated with 4G10F4 mAb only in dosage of 5mg/kg exhibited a significant lower mean parasite burden (0.89±0.97 g) compared to isotype mAb treated control mice (2.21±1.30 g). In the second experiment, mice were infected through hepatic portal vein and treated with 4G10F4 mAb (5mg/kg) at one week after surgery once per week for 8 times. The numbers of hepatic metacestode lesions of the 4G10F4 treatment group were significantly lower in comparison to the isotype control group. Pathological analysis revealed severe disruption of the inner structure of the metacestode in both experiments, particularly affecting the germinal and laminated layers, resulting in the transformation into infertile vesicles after treatment with 4G10F4. In addition, the safety of 4G10F4 for AE treatment was confirmed through assessment of mouse weight and evaluation of liver and kidney function. This study presents antigen-specific monoclonal antibody immunotherapy as a promising therapeutic approach against E. multilocularis induced AE.

99mTc-labeled, tofacitinib citrate encapsulated chitosan microspheres loaded in situ gel formulations for intra-articular treatment of rheumatoid arthritis.

Inflammatory diseases including rheumatoid arthritis are major health problems. Although different techniques and drugs are clinically available for the diagnosis and therapy of the disease, novel approaches regarding radiolabeled drug delivery systems are researched. Hence, in the present study, it was aimed to design, prepare, and characterize 99mTc-radiolabeled and tofacitinib citrate-encapsulated microsphere loaded poloxamer in situ gel formulations for the intra-articular treatment. Among nine different microsphere formulations, MS/TOFA-9 was chosen as the most proper one due to particle size, high encapsulation efficiency, and in vitro drug release behavior. Poloxamer 338 at a concentration of 15% was used to prepare in situ gel formulations. For intra-articular administration, microspheres were dispersed in an in situ gel containing 15% Poloxamer 338 and characterized in terms of gelation temperature, viscosity, rheological, mechanical, and spreadability properties. After the determination of the safe dose for MS/TOFA-9 and PLX-MS/TOFA-9 as 40 µL/mL in the cell culture study performed on healthy cells, the high anti-inflammatory effects were due to significant cellular inhibition of fibroblasts. In the radiolabeling studies with 99mTc, the optimum radiolabeling condition was determined as 200 ppm SnCl2 and 0.5 mg ascorbic acid, and both 99mTc-MS/TOFA-9 and 99mTc-PLX-MS/TOFA-9 exhibited high cellular binding capacity. In conclusion, although further in vivo experiments are required, PLX-MS/TOFA-9 was found to be a promising agent for intra-articular injection in rheumatoid arthritis.

Novel Penicillin Derivatives Against Selected Multiple-drug Resistant Bacterial Strains: Design, Synthesis, Structural Analysis, In Silico and In Vitro Studies.

The rising numbers of multiple drug-resistant (MDR) pathogens and the consequent antibacterial therapy failure that resulted in severe medical conditions push to illustrate new molecules with extended activity against the resistant strains. In this manner, chemical derivatization of known antibiotics is proposed to save efforts in drug discovery, and penicillins serve as an ideal in this regard. Seven synthesized 6-aminopenicillanic acid-imine derivatives (2a-g) were structure elucidated using FT-IR, 1H NMR, 13C NMR, and MS spectroscopy. In silico molecular docking and ADMET studies were made. The analyzed compounds obeyed Lipinski's rule of five and showed promising in vitro bactericidal potential when assayed against E. coli, E. cloacae, P. aeruginosa, S. aureus, and A. baumannii. MDR strains using disc diffusion and microplate dilution techniques. The MIC values were 8 to 32 μg/mL with more potency than ampicillin, explained by better membrane penetration and more ligand-protein binding capacity. The 2g entity was active against E. coli. This study was designed to find new active penicillin derivatives against MDR pathogens. The products showed antibacterial activity against selected MDR species and good PHK, PHD properties, and low predicted toxicity, offering them as future candidates that require further preclinical assays.

Ferric citrate enhanced bioreduction of Cr(VI) by Bacillus cereus RCr in aqueous solutions: reduction performance and mechanisms.

The bioreduction characteristics and mechanisms of Cr(VI) onto Bacillus cereus RCr enhanced by ferric citrate were investigated. The optimum conditions were initial pH 9, temperature 40°C, inoculation amount 4%, and glucose 3g/L, respectively. The addition of 1.5g/L ferric citrate increased the average reduction rate from 120.43 to 220.61mg/(L∙h) compared with the control (without ferric citrate). The binding capacity of Cr(III) on the cell surface increased to 21%, in which the precipitates were mainly CrO(OH), Cr2O3, and FeCr2O4. Cell membrane was the main site of reduction, related important functional groups: - COOH, C-H, - NH2, C = C, and P-O. Fe(III) increased the yield of NADH and cytochrome c by approximately 48.51% and 68.63%, which significantly facilitated the electron generation and electron transfer, thus increasing the amount of electrons in the bioreduction of heavy metals by an average of 110%. Among the electrons obtained by Cr(VI), the proportion of indirect reduction mediated by Fe(III)/Fe(II) shuttle was 62% on average, whereas direct reduction mediated by reductase was 38%. These results may provide insights into the bioreduction process by bacteria enhanced by Fe(III) for detoxification of heavy metals with multiple valences, as an important step towards improving microbial remediation.

Screening of a readily selenium-enriched Spirulina polysaccharide and characterization of its structure and bioactivity

The potential of selenium-containing polysaccharides as organic selenium nutritional supplements has attracted considerable interest; however, they also encounter obstacles, including the presence of impurities and a low selenium binding efficiency. In this study, a novel method combining Q-Sepharose Fast-Flow (QFF) column chromatography with the HNO3–Na2SeO3 method was proposed. Through the application of this methodology, the selenium binding efficiency of polysaccharides was enhanced by a factor of 3.41. The selenium binding capacities of rhamnose and glucose were the highest among the monosaccharides, reaching 770.7 mg/L and 955.3 mg/L, respectively. Spirulina polysaccharide-3 (SPS-3) was selected for further investigation because of its elevated total rhamnose and glucose contents and optimal selenium binding efficiency. Employing common assays, a comparative analysis of selenium-containing Spirulina polysaccharide-3 (SeCSPS) and SPS-3 is presented. Upon selenium binding, the surface morphology of the monosaccharides changed, whereas the main chain structure remained unaltered. The antihyperglycemic activity of SeCSPS was enhanced by selenium binding. Furthermore, both SeCSPS and SPS-3 can be degraded by the simulated digestive system. In conclusion, SeCSPS can be employed as an organic selenium supplement in food or nutraceuticals while also resulting in a high selenium content. The findings of this study will provide a viable avenue for the high-value utilization of Spirulina, which will help resolve the selenium deficiency issue faced by populations with low selenium intake globally.

Assessing physicochemical characteristics of a shear-thinning polysaccharide mucilage extracted from marshmallow root (Althaea officinalis L.) by an ohmic heating system

Althaea officinalis L. root mucilage holds promise for food industries due to its functional properties. Despite various extraction techniques, ohmic systems remain underexplored for mucilage extraction. This study aimed to compare the efficacy of mucilage extraction using ohmic systems with maceration and investigate their physicochemical properties. The mucilage extraction was carried out utilizing maceration (M), ohmic-assisted extraction (OAE), and ohmic-assisted vacuum extraction (OAVE). Various parameters were evaluated, such as densities and specific energy consumption. The mucilage obtained by OAE had the highest yield (8.9 %). The highest solubility corresponded to the mucilage obtained by the OAE system (85.18 % at 65 °C). OAVE mucilage had 76.16 % swelling and 82.5 g water/g dry sample binding capacity, while OAE mucilage had 19.6 g water/g dry sample binding capacity. The OAVE mucilage oil absorption (12.3 g oil/g dry sample) was almost twice that of the OAE system. Rheological analysis characterized them as a pseudoplastic behavior. DSC thermogram of mucilage samples exhibited a singular endothermic peak (92.05 to 108.3 °C). FTIR analysis highlighted that the primary constituents of mucilage samples predominantly consisted of polysaccharides. This study concluded that ohmic-assisted extraction was the most efficient method for obtaining mucilage. Further research could explore the potential applications of this mucilage.

Synthesis and computational studies of new pyridine, pyrazole, pyran, and pyranopyrimidine-based derivatives of potential antimicrobial activity as DNA gyrase and topoisomerase IV inhibitors

In this study, new derivatives based on pyridine, pyrazole, pyran, and pyranopyrimidine scaffolds 5–14 were designed and synthesized. The newly synthesized compounds were characterized using microanalytical and spectral data. Using amoxicillin and amphotericin B, two common antibacterial and antifungal medications, respectively, the antimicrobial activity of the new compounds was assessed against a variety of strains of both Gram-positive and Gram-negative bacteria as well as fungal infections. The most promising activity was achieved by pyridine-based derivatives 5, 7a, and 7b, which exhibited MIC values ranging from 0.95 to 18.04 µM against the examined bacterial strains and ranging from 4.65 to 33.16 µM against the examined fungal strains. The later derivatives were also evaluated as E. coli DNA gyrase B/topoisomerase IV inhibitors in comparison with novobiocin as a standard drug. Although the assessed candidates 5, 7a, and 7b exhibited a promising suppression impact against E. coli DNA gyrase B (IC50 = 3.11 ± 0.14, 3.85 ± 0.20, and 4.05 ± 0.10, respectively, IC50 novobiocin= 3.64 ± 0.10 µM), they showed detectable less suppression impact against Topoisomerase IV than that of the reference drug with IC50 values of 19.72 ± 1.00, 79.33 ± 0.25, 85.14 ± 0.10, and 13.42 ± 0.05 µM, respectively. Additionally, the safety profiles of 5, 7a, and 7b against WI38 cells were significantly superior to that of novobiocin (IC50 = 138 ± 0.33, 170 ± 0.40, 163.3 ± 0.17, and 86.2 ± 0.03 µM, respectively).Lastly, molecular docking was used to examine the most active derivatives 5, 7a, and 7b's binding capacity to the target DNA gyrase B/topoisomerase IV. The molecules exhibited various H-interactions with the amino acid residues Asp73, Arg76, and Val71 in E. coli DNA gyrase, where compound 5 exhibited H-bonding with the Asp1069 side chain of E. coli Topoisomerase IV. Additional in silico ADMET studies were conducted to represent their oral bioavailability and drug-likeness characteristics.

Isolation and physiochemical characterization of Red kidney bean (Phaseolus vulgaris L.) starch

The current study focuses on the isolation and physiochemical characterisation of starch from Phaseolus vulgaris L. The yield of the starch was about 25.8 %. The size of the starch granules ranged between 10 and 25μm. The starch had a higher water binding capacity, swelling power and solubility but had low paste clarity. P. vulgaris starch exhibited high freeze thaw stability. The bulk, tapped and particle densities of the starch were 1.64 g/cm3, 2.06 g/cm3 and 0.66 g/cm3 respectively. The porosity of the starch was about 64.1%. The estimated Carr index and Hausner’s ratio indicated good flowability of the starch powder. X-ray diffraction analysis indicated that the starch was C-type starch. Fourier-transform infrared spectroscopy revealed the functional group corresponding to that of starch. Thermo gravimetric analysis indicated good thermostability.

β-CD@AgNPs with peroxisase-like activity for colorimetric determination of chiral tryptophan

Different enantiomer forms of amino acids play different roles in multifarious fields, and improper use will cause irreversible effects. Therefore, the identification of chiral amino acids is a vital issue in the field of pharmaceutical analysis. Herein, a chiral sensing system of β-cyclodextrin coated silver nanoparticle (β-CD@AgNPs) with peroxidase-like activity was designed for the fast and efficient colorimetric identification of tryptophan (Trp) enantiomers based on the difference in binding capacity between D/L-Trp and β-CD. The results showed the satisfactory linearity for detecting D/L-Trp over the concentration range from 0.2 to 4 mM with a LOD of 0.16 and 0.18 mM, respectively. Moreover, the absorbance increased linearly with the rise of D-Trp concentration percentage in the Trp enantiomer mixture. The proposed method avoided the use of natural enzymes and improved the stability due to the protective effect of cyclodextrin, which provided a new idea for selective colorimetric recognition and detection of D/L-Trp based on cyclodextrin.

BMP-Binding Polysulfonate Brushes to Control Growth Factor Presentation and Regulate Matrix Remodelling.

Bone morphogenetic proteins (BMPs) are important targets to incorporate in biomaterial scaffolds to orchestrate tissue repair. Glycosaminoglycans (GAGs) such as heparin allow the capture of BMPs and their retention at the surface of biomaterials at safe concentrations. Although heparin has strong affinities for BMP2 and BMP4, two important types of growth factors regulating bone and tissue repair, it remains difficult to embed stably at the surface of a broad range of biomaterials and degrades rapidly in vitro and in vivo. In this report, biomimetic poly(sulfopropyl methacrylate) (PSPMA) brushes are proposed as sulfated GAG mimetic interfaces for the stable capture of BMPs. The growth of PSPMA brushes via a surface-initiated activator regenerated by electron transfer polymerization is investigated via ellipsometry, prior to characterization of swelling and surface chemistry via X-ray photoelectron spectroscopy and Fourier transform infrared. The capacity of PSPMA brushes to bind BMP2 and BMP4 is then characterized via surface plasmon resonance. BMP2 is found to anchor particularly stably and at high density at the surface of PSPMA brushes, and a strong impact of the brush architecture on binding capacity is observed. These results are further confirmed using a quartz crystal microbalance with dissipation monitoring, providing some insights into the mode of adsorption of BMPs at the surface of PSPMA brushes. Primary adsorption of BMP2, with relatively little infiltration, is observed on thick dense brushes, implying that this growth factor should be accessible for further binding of corresponding cell membrane receptors. Finally, to demonstrate the impact of PSPMA brushes for BMP2 capture, dermal fibroblasts were then cultured at the surface of functionalized PSPMA brushes. The presence of BMP2 and the architecture of the brush are found to have a significant impact on matrix deposition at the corresponding interfaces. Therefore, PSPMA brushes emerge as attractive coatings for scaffold engineering and stable capture of BMP2 for regenerative medicine applications.

Purification of his-tagged proteins using printed monolith adsorption columns

Bio-separation is a crucial process in biotechnology and biochemical engineering for separating biological macromolecules, and the field has long relied on bead-based and expanded bed chromatography. Printed monolith adsorption (PMA) is a new alternative to which uses a 3D-printed monolithic structure containing self-supporting, ordered flow channels. PMA allows for direct purification of biological molecules from crude cell lysates and cell cultures, and like the other technologies, can functionalized to specifically target a molecule and enable affinity chromatography. Here we have combined PMA technology with an immobilized metal affinity ligand (iminodiacetic acid) to provide selectivity of binding to polyhistidine-tagged proteins during PMA chromatography. Two different PMA structures were created and tested for both static and dynamic protein-binding capacity. At comparative linear flow rates, the dynamic binding capacity of both columns was ≈3 mg/mL, while static capacity was shown to differentiate based on column voidage. We show that a polyhistidine-tagged protein can be directly purified from crude lysate with comparable results to the available commercial providers of IMAC, and with a substantially reduced purification time.

Identification, screening and molecular mechanisms of natural stable angiotensin-converting enzyme (ACE) inhibitory peptides from foxtail millet protein hydrolysates: a combined in silico and in vitro study.

The stability of bioactive peptides under various food processing conditions is the basis for their use in industrial manufacturing. This study aimed to identify natural ACE inhibitors with excellent stability and investigate their physicochemical properties and putative molecular mechanisms. Five novel ACE inhibitory peptides (QDPLFPL, FPGVSPF, SPAQLLPF, LVPYRP, and WYWPQ) were isolated and identified using RP-HPLC and Nano LC-MS/MS with foxtail millet protein hydrolysates as the raw material. These peptides are non-toxic and exhibit strong ACE inhibitory activity in vitro (IC50 values between 0.13 mg mL-1 and 0.56 mg mL-1). In addition to QDPLFPL, FPGVSPF, SPAQLLPF, LVPYRP, and WYWPQ have excellent human intestinal absorption. Compared to FPGVSPF and SPAQLLPF, the stable helical structure of LVPYRP and WYWPQ allows them to maintain high stability under conditions that mimic gastrointestinal digestion and various food processing (temperatures, pH, sucrose, NaCl, citric acid, sodium benzoate, Cu2+, Zn2+, K+, Mg2+, Ca2+). The results of molecular docking and molecular dynamics simulation suggest that LVPYRP has greater stability and binding capacity to ACE than WYWPQ. LVPYRP might attach to the active pockets (S1, S2, and S1') of ACE via hydrogen bonds and hydrophobic interactions, then compete with Zn2+ in ACE to demonstrate its ACE inhibitory activity. The binding of LVPYRP to ACE enhances the rearrangement of ACE's active structural domains, with electrostatic and polar solvation energy contributing the most energy to the binding. Our findings suggested that LVPYRP derived from foxtail millet protein hydrolysates has the potential to be incorporated into functional foods to provide antihypertensive benefits.

Preparation, structural characterization, and functional properties of wheat gluten amyloid fibrils-chitosan double network hydrogel as delivery carriers for ferulic acid

It has been demonstrated that ferulic acid (FA) can be effectively encapsulated using wheat gluten amyloid fibrils (AF) and chitosan (CS) in a double network hydrogel (DN) form, with cross-linking mediated by Genipin (GP). Within this system, the DN comprising gluten AF-FA and CS-FA exhibited optimal loading metrics at a formulation designated as DN8, achieving a load efficiency of 88.5 % and a load capacity of 0.78 %. Analysis through fluorescence quenching confirmed that DN8 harbored the highest quantity of FA. Fourier-transform infrared spectroscopy (FTIR) further verified a significant increase in β-sheet content post-hydrogel formation, enhancing the binding capacity for FA. Rheological assessments indicated a transition from solution to gel, delineating the phase state of the DN. Comprehensive in vitro digestion studies revealed that DN8 provided superior sustained release properties, exhibited the highest total antioxidant capacity, and displayed potent inhibitory activities against angiotensin I converting enzyme (ACE) and acetylcholinesterase (Ach-E). Additionally, the DN significantly bolstered the stability of FA against photothermal degradation. Collectively, these findings lay foundational insights for the advancement of the wheat gluten AF-based delivery system for bioactive compounds and provided a theoretical basis for the development of functional foods.

Chitosan/Poly(maleic acid-alt-vinyl acetate) Hydrogel Beads for the Removal of Cu2+ from Aqueous Solution.

Covalent cross-linked hydrogels based on chitosan and poly(maleic acid-alt-vinyl acetate) were prepared as spherical beads. The structural modifications of the beads during the preparation steps (dropping in liquid nitrogen and lyophilization, thermal treatment, washing with water, and treatment with NaOH) were monitored by FT-IR spectroscopy. The hydrogel beads have a porous inner structure, as shown by SEM microscopy; moreover, they are stable in acidic and basic pH due to the covalent crosslinking. The swelling degree is strongly influenced by the pH since the beads possess ionizable amine and carboxylic groups. The binding capacity for Cu2+ ions was examined in batch mode as a function of sorbent composition, pH, contact time, and the initial concentration of Cu2+. The kinetic data were well-fitted with the pseudo-second-order kinetic, while the sorption equilibrium data were better fitted with Langmuir and Sips isotherms. The maximum equilibrium sorption capacity was higher for the beads obtained with a 3:1 molar ratio between the maleic copolymer and chitosan (142.4 mg Cu2+ g-1), compared with the beads obtained using a 1:1 molar ratio (103.7 mg Cu2+ g-1). The beads show a high degree of reusability since no notable decrease in the sorption capacity was observed after five consecutive sorption/desorption cycles.

New insight into the effects of different glycation treatments on the structure and IgG‐binding capacity of α‐lactalbumin

New insight into the effects of different glycation treatments on the structure and <scp>IgG</scp>‐binding capacity of α‐lactalbumin

A colorimetric platform for sensitive sensing of Hg2+ and S2− based on Se-AuNPs with Hg2+-activated peroxidase-like activity

Herein, the selenium (Se) modified gold nanoparticles (Se-AuNPs) was synthesized using cerium doped carbon dots (Ce-CDs) as a reducing agent and template. As desired, Se-AuNPs displays enhanced peroxidase (POD)-like activity in the presence of Hg2+. The mechanism for the enhanced activity was attributed to the increased affinity between Se-AuNPs-Hg2+ and the substrate, in which Se and Au elements have a strong binding capacity to Hg2+, forming Hg–Se bonds and Au–Hg amalgam to generate more ·OH. This POD-like activity of Se-AuNPs-Hg2+ correlates with the colorimetric reaction by the catalytic reaction between 3,3′,5,5′-tetramethylbenzidine (TMB) and H2O2. The oxidation of TMB was completely inhibited by the introduction of the reductive S2−. Based on the above findings, a strategy for the colorimetric detection of Hg2+ and S2− by Se-AuNPs was established with linear ranges of 0.33–66 μg/L and 0.625–75 μg/L, and low detection limits of 0.17 μg/L and 0.12 μg/L (3.3 δ/k), respectively. When the colorimetric probes for detection of Hg2+ and S2− was applied in environmental water samples, the recoveries were in the range of 90.3–108.0 %. This method will provide a new idea for the colorimetric detection strategy of Hg2+ due to the strong interaction between Hg and Se.

Effect of yeast (Saccharomyces cerevisiae) fermentation on conformational changes in pig liver proteins and their ability to bind to characteristic aldehydes

This study aimed to explore the potential of a fermentation technology to reduce off-flavour perception and its underlying mechanisms. Results revealed that yeast fermentation (YF) significantly ameliorated the off-flavour of pig liver (p < 0.05). Specifically, YF pre-treatment decreased the relative abundance of α-helix and fluorescence intensity while increasing the surface hydrophobicity and SS level and loosening the microstructure of myofibrillar proteins (MPs) in pig liver. Additionally, the appropriate fermentation treatments enhanced the MP–aldehyde binding capacity by 0.25–1.30 times, demonstrating that YF-induced conformational modifications in pig liver proteins made them more prone to interacting with characteristic aldehydes. Moreover, molecular docking results confirmed that hydrophobic interactions are the primary drivers of MP–aldehyde binding. These findings suggest that YF technology holds immense promise for modulating off-flavour perception in liver products by altering protein conformation.