Binary Brushes Research Articles

Rewritable Surface‐Grafted Polymer Brushes with Dynamic Covalent Linkages

AbstractSurface grafting of polymer brushes drastically modifies surface properties, including wettability, compatibility, responsiveness, etc. A broad variety of functionalities can be introduced to the surface via different types of polymers. Bringing together properties of two or more types of polymer brushes to one surface opens up even more possibilities in brush‐modified materials. However, while it is generally feasible to introduce several chemical compositions along the brushes via copolymerization, it is challenging to vary the types of polymer brushes along a surface. Although previous studies have demonstrated binary brushes via orthogonal polymerization techniques or partial deactivation/regrafting, they commonly limit the number of polymer types to two. Here, we propose a strategy to introduce dynamic covalent diketoenamine linkages at the root of polymer brushes. The grafting density could be precisely tuned during surface functionalization. The surface‐anchored polymer brushes were cleaved by the addition of small molecule amines. New polymer brushes can be regrafted from the surface following refunctionalization of exposed sites. The maneuverability allows tuning of the types and densities of the polymer brushes, pointing the way to the preparation of a new generation of well‐defined brush‐modified materials with mixed grafts, with potential applications in the design of smart materials and surfaces.

Rewritable Surface-Grafted Polymer Brushes with Dynamic Covalent Linkages.

Surface grafting of polymer brushes drastically modifies surface properties, including wettability, compatibility, responsiveness, etc. A broad variety of functionalities can be introduced to the surface via different types of polymers. Bringing together properties of two or more types of polymer brushes to one surface opens up even more possibilities in brush-modified materials. However, while it is generally feasible to introduce several chemical compositions along the brushes via copolymerization, it is challenging to vary the types of polymer brushes along a surface. Although previous studies have demonstrated binary brushes via orthogonal polymerization techniques or partial deactivation/regrafting, they commonly limit the number of polymer types to two. Here, we propose a strategy to introduce dynamic covalent diketoenamine linkages at the root of polymer brushes. The grafting density could be precisely tuned during surface functionalization. The surface-anchored polymer brushes were cleaved by the addition of small molecule amines. New polymer brushes can be regrafted from the surface following refunctionalization of exposed sites. The maneuverability allows tuning of the types and densities of the polymer brushes, pointing the way to the preparation of a new generation of well-defined brush-modified materials with mixed grafts, with potential applications in the design of smart materials and surfaces.

Self-Templating Copolymerization to Produce Robust Conductive Nanocoatings Based on Conjugated Polymer Brushes with Implementable Memristive Characteristics.

An effective synthesis of conductive polymer brushes, i.e., self-templating surface-initiated copolymerization (ST-SICP), is developed. It proceeds through copolymerization of pendant thiophene groups in the precursor multimonomer poly(3-methylthienyl methacrylate) (PMTM) brushes with free 3-methylthiophene (3MT) monomers leading to PMTM-co-P3MT brushes. This approach leads to improved conformational freedom of generated conjugated poly(thiophene)-based chains and their higher share in the brushes with respect to conjugation of pendant thiophene groups only. As a result, best performing conjugated PMTM-co-P3MT brushes demonstrate high ohmic conductivity in both out-of-plane and in-plane direction. Furthermore, thanks to the covalent anchoring as well as intra- and intermolecular connections, highly stable and mechanically robust nanocoatings are produced which can survive mechanical cleaning and long-term storage under ambient conditions. Grafting of ionic poly(sodium 4-styrenesulfonate) (PSSNa) in between PMTM-co-P3MT chains brings new properties to such binary mixed brushes that can operate as thin-film memristive coating with switchable conductance. It is worth mentioning that the crucial synthetic steps, i.e., grafting of precursor PMTM brushes by surface-initiated organocatalyzed atom transfer radical polymerization (SI-O-ATRP) and PSSNa chains by surface-initiated photoiniferter-mediated polymerization (SI-PIMP) are conducted under ambient conditions using only microliter volumes of reagents providing methodology that can be considered for use beyond the laboratory scale.

Dual-functional poly(2-methyl-2-oxazoline)/poly(2-(dimethylamine)ethyl methacrylate) mixed brushes with switchable protein adsorption and antibacterial properties

Herein, binary mixed brushes consisting of poly(2-methyl-2-oxazoline) (PMOXA) and poly(2-(dimethylamine)ethyl methacrylate) (PDMAEMA) with different chain lengths were fabricated by successive grafting of NH2-terminated PMOXA and SH-terminated PDMAEMA onto polydopamine-anchored substrates. The mixed-brush coating was characterized by variable-angle spectroscopic ellipsometry, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, zeta potential measurements, water contact angle, and atomic force microscopy. The mixed brushes showed tunable surface charge, wettability, and surface roughness, depending on the degree of PDMAEMA swelling under varying pH and ionic strength (I). Then the adsorption behaviors of pepsin, bovine serum albumin (BSA), γ-globulin, and lysozyme, four very different proteins with regard to isoelectric point, on the mixed brushes coating were studied by using fluorescence microscopy and surface plasmon resonance. When the chain length of PDMAEMA was about twice as long as PMOXA, the mixed brushes not only had high adsorption capacity for pepsin, BSA, and γ-globulin but also had a desorption efficiency of 86.9%, 87.1%, and 93.5%, respectively. It is explained that electrostatic attraction between the protonated PDMAEMA and positively charged acidic proteins (pepsin and BSA, whose isoelectric points were below the pKa of PDMAEMA) would drive the intensive adsorption (at pH 3, I = 10−3 mol·L−1 for pepsin, and pH 5, I = 10−5 mol·L−1 for BSA), while desorption was dominated by the hydrophilic PMOXA when PDMAEMA was shrinking (at pH 7, I = 10−1 mol·L−1 for pepsin, and pH 9, I = 10−1 mol·L−1 for BSA). Furthermore, the isoelectric precipitation led to the adsorption of neutral protein (γ-globulin, whose isoelectric point was near the pKa of PDMAEMA) at pH 7, I = 10−5 mol·L−1, while electrostatic repulsion and antifouling PMOXA triggered the desorption of γ-globulin at pH 3, I = 10−1 mol·L−1. However, alkaline protein (lysozyme, whose isoelectric point was higher than the pKa of PDMAEMA) exhibited slight adsorption on PMOXA/PDMAEMA mixed brushes under test conditions, regardless of whether PMOXA or PDMAEMA occupied the outermost layer. The antibacterial property of the mixed brushes against Escherichia coli was investigated. PMOXA/PDMAEMA mixed brushes showed significant bactericidal activity at pH 3, I = 10−3 mol·L−1, while the rinse of pH 9, I = 10−1 mol·L−1 solution could remove most of the residual bacteria. This work not only enables controlled adsorption of proteins with different isoelectric points but also ensures that the surface of the coating is minimized from bacterial contamination.

Modular and Substrate-Independent Grafting-To Procedure for Functional Polymer Coatings.

The ability to tailor polymer brush coatings to the last nanometer has arguably placed them among the most powerful surface modification techniques currently available. Generally, the synthesis procedures for polymer brushes are designed for a specific surface type and monomer functionality and cannot be easily employed otherwise. Herein, we describe a modular and straightforward two-step grafting-to approach that allows introduction of polymer brushes of a desired functionality onto a large range of chemically different substrates. To illustrate the modularity of the procedure, gold, silicon oxide (SiO2), and polyester-coated glass substrates were modified with five different block copolymers. In short, the substrates were first modified with a universally applicable poly(dopamine) primer layer. Subsequently, a grafting-to reaction was performed on the poly(dopamine) films using five distinct block copolymers, all of which contained a short poly(glycidyl methacrylate) segment and longer segment of varying chemical functionality. Ellipsometry, X-ray photoelectron spectroscopy, and static water contact angle measurements confirmed successful grafting of all five block copolymers to the poly(dopamine)-modified gold, SiO2, and polyester-coated glass substrates. In addition, our method was used to provide direct access to binary brush coatings, by simultaneous grafting of two different polymer materials. The ability to synthesize binary brush coatings further adds to the versatility of our approach and paves the way toward production of novel multifunctional and responsive polymer coatings.

Enthalpic Interactions and Solution Behaviors of Solvent-Free Polymer Brushes

We performed molecular dynamics simulations to characterize the role of enthalpic interaction in impacting the static and dynamic properties of solvent-free polymer brushes. The intrinsic enthalpic interaction in the simulation was introduced using different attraction strengths between distinct species. Two model systems were considered: one consisting of binary brushes of two different polymer types and the other containing a mixture of homopolymer brushes and free molecules. In the first system, we observed that, when two originally incompatible polymers were grafted to opposing surfaces, the miscibility between them was significantly enhanced. A less favorable intrinsic enthalpic interaction in the brushes resulted in a more stretched chain configuration, a lower degree of inter-brush penetration, and faster segmental relaxation. In the second system, we characterized the solvent capacity of the homopolymer brushes from variations in the energy components of the system as a function of the number of free molecules. We determined that molecular absorption was driven by the release of the entropic frustration for the grafted chains in conjunction with the chemical affinity between the solutes and polymers. The solute distribution function within the inter-wall space showed that solute-polymer mixing in the middle of the gap occurred preferentially when the enthalpic interaction was more favorable. When this was not the case, absorption was predominantly localized near the grafting surface. From the mean square displacement of the solute, we found that the brush profiles restrained the molecular diffusion perpendicular to the grafting wall; the weaker the attraction from the brush, the higher the solute mobility.

Vapor sorption in binary polymer brushes: The effect of the polymer–polymer interface

Polymer brushes attract vapors that are good solvents for polymers. This is useful in sensing and other technologies that rely on concentrating vapors for optimal performance. It was recently shown that vapor sorption can be enhanced further by incorporating two incompatible types of polymers A and B in the brushes: additional vapor adsorbs at the high-energy polymer-polymer interface in these binary brushes. In this article, we present a model that describes this enhanced sorption in binary brushes of immiscible A-B polymers. To do so, we set up a free-energy model to predict the interfacial area between the different polymer phases in binary brushes. This description is combined with Gibbs adsorption isotherms to determine the adsorption at these interfaces. We validate our model with coarse-grained molecular dynamics simulations. Moreover, based on our results, we propose design parameters (A-B chain fraction, grafting density, vapor, and A-B interaction strength) for optimal vapor absorption in coatings composed of binary brushes.

High-Resolution Nanopatterning of Free-Standing, Self-Supported Helical Polypeptide Rod Brushes via Electron Beam Lithography.

In this study of nanopatterned helical poly(benzyl-l-glutamate) (PBLG) brushes, rod-type brush arrays were fabricated via an integrated process of high-resolution lithography and surface-initiated vapor deposition polymerization (SI-VDP). "Nanospikes" of polymer brushes with spacings of less than 100 nm were produced. The topology and areal behavior of the resulting patterned rod-like brushes were analyzed and compared with patterned coil-type brushes. A geometric study of these self-assembled "nanospikes" was carried out, and their cross sections were investigated via focused ion beam (FIB) and scanning electron microscopy (SEM). Furthermore, the presence of poly(N-isopropylacrylamide) (PNIPAM) brushes in unpatterned regions was shown to inhibit undesired "inter-spike" bridging of the PBLG brushes, resulting in more well-defined nanostructures. It was shown that rod-like polypeptide brushes are capable of self-segregation and become arranged vertically without any external support from their surroundings, to form a rod bundle end-point functional topography that could provide possible pathways for studies of model biological surfaces, directed assembly of nanoparticles, or binary mixed brush surfaces with dual properties.

Concentrating Vapor Traces with Binary Brushes of Immiscible Polymers.

Vapors in the air around us can provide useful information about our environment, but we need sensitive vapor sensors to access this information, especially because those vapors are often present at very low concentrations. We report molecular dynamics simulations of a concept that can significantly increase the sensitivity of vapor sensors at low concentrations. By coating the sensor surfaces with end-anchored immiscible polymers, surface-bound polymer blends are formed that can concentrate vapors, reaching sorption enhancements of more than one order of magnitude, especially at low vapor concentrations.

Application of poly(2-methyl-2-oxazoline) in protein separation by capillary electrophoresis

Capillary electrophoresis (CE), a commonly used liquid-phase separation technology, has many advantages such as high analysis speed, high separation efficiency, and low sample consumption. Hence, CE has gained popularity in food analysis, medical clinical diagnosis, environmental monitoring, and biological sample separation, especially in the field of protein separation and analysis. However, the fused silica capillaries that are commonly used in CE easily adsorb proteins, resulting in unstable electroosmotic flow and poor reproducibility of the separation results. In addition, due to the short optical path of the typical ultraviolet detectors employed in commercial CE, the detection sensitivity often does not meet the requirements for the direct analysis of low-abundance proteins. Therefore, developing a coating that can prevent protein adsorption and improve detection sensitivity is one of the important challenges in CE separation and analysis of proteins. Poly(2-methyl-2-oxazoline), a peptide-like hydrophilic polymer, not only has hydrophilicity, protein-repellent ability, and biocompatibility similar to the gold standard of the anti-protein adsorption polymer (polyethylene glycol), but also shows better stability than polyethylene glycol due to its peptide-like structure. Therefore, it has been increasingly used in biomass transfer, drug carrier, and impedance protein adsorption in recent years. This article aims to review the recent applications of poly(2-methyl-2-oxazoline) in CE from two standpoints. First, poly(2-methyl-2-oxazoline) was grafted onto the capillary inner wall using polydopamine as an anchor. The resulting coated capillary successfully separated a mixture of proteins (such as lysozyme, cytochrome C, ribonuclease A, and α -pancreas chymosinogen A), in addition to preventing the non-specific adsorption of other proteins during the quantitative analysis of melamine and lactoferrin in milk powder. Thus, the detection efficiency of melamine and lactoferrin in milk powder was improved. Second, poly(2-methyl-2-oxazoline) was used to produce a binary mixed brush coating with a stimulus-responsive polymer (such as polyacrylic acid). The capillary coated with the mixed brushes could adsorb high amounts of the target protein (such as bovine serum albumin and lysozyme) under certain pH and ionic strength conditions, and most of the adsorbed proteins could be desorbed by changing the pH and ionic strength. During the release, poly(2-methyl-2-oxazoline) present on the coating would prevent the adsorption of proteins. Under the dual effects of electroosmotic flow and electrophoresis, the released protein could migrate rapidly, and the instantaneous concentration of the protein reaching the detector could be greatly increased. Therefore, the target proteins could be on-line concentrated and the detection signals could be amplified, resulting in improved detection sensitivity for the protein. Future development trends in the function of poly(2-methyl-2-oxazoline) for the separation of proteins by CE are also discussed.

Sub-100 nm Cocontinuous Structures Fabricated in Immiscible Commodity Polymer Blend with Extremely Low Volume/Viscosity Ratio

Sub-100 nm cocontinuous structures were prepared successfully in poly(vinylidene fluoride)/poly(l-lactic acid) (PVDF/PLLA) blend with extremely low volume/viscosity ratio by melting blending. The reactive compatibilizer with poly(methyl methacrylate) (PMMA) side chains and random epoxide groups plays an important role in the formation and the size decrease of these structures. On one hand, PMMA side chains exhibit excellent entanglement with PVDF; on the other hand, the epoxide groups can react with carboxyl group of PLLA. The resultant comb-like compatibilizer exhibits greater capacity to maintain the stress balance on two sides. The repulsion state of the binary brushes enlarges the interface curvature radius, dominating the formation of cocontinuous structures.

Bioinspired thermoresponsive nanoscaled coatings: Tailor-made polymer brushes with bioconjugated arginine-glycine-aspartic acid-peptides.

The development of bioengineered surface coatings with stimuli-responsive properties is beneficial for a number of biomedical applications. Environmentally responsive and switchable polymer brush systems have a great potential to create such smart biointerfaces. This study focuses on the bioconjugation of cell-instructive peptides, containing the arginine-glycine-aspartic acid tripeptide sequence (RGD motif), onto well-defined polymer brush films. Herein, the highly tailored end-grafted homo polymer brushes are either composed of the polyelectrolyte poly(acrylic) acid (PAA), providing the reactive carboxyl functionalities, or of the temperature-responsive poly(N-isopropylacrylamide) (PNIPAAm). Of particular interest is the preparation of grafted-to binary brushes using both polymers and their subsequent conversion to RGD-biofunctionalized PNIPAAm-PAA binary brushes by a carbodiimide conjugation method. The bioconjugation process of two linear RGD-peptides Gly-Arg-Gly-Asp-Ser and Gly-Arg-Gly-Asp-Ser-Pro-Lys and one cyclic RGD-peptide cyclo(Arg-Gly-Asp-D-Tyr-Lys) is comparatively investigated by complementary analysis methods. Both techniques, in situ attenuated total reflectance Fourier transform infrared spectroscopy measurements and the in situ spectroscopic ellipsometric analysis, describe changes of the brush surface properties due to biofunctionalization. Besides, the bound RGD-peptide amount is quantitatively evaluated by ellipsometry in comparison to high performance liquid chromatography analysis data. Additionally, molecular dynamic simulations of the RGD-peptides themselves allow a better understanding of the bioconjugation process depending on the peptide properties. The significant influence on the bioconjugation result can be derived, on the one hand, of the polymer brush composition, especially from the PNIPAAm content, and, on the other hand, of the peptide dimension and its reactivity.

Fluctuation Effects on the Brush Structure of Mixed Brush Nanoparticles in Solution.

A potentially attractive way to control nanoparticle assembly is to graft one or more polymers on the nanoparticle, to control the nanoparticle-nanoparticle interactions. When two immiscible polymers are grafted on the nanoparticle, they can microphase separate to form domains at the nanoparticle surface. Here, we computationally investigate the phase behavior of such binary mixed brush nanoparticles in solution, across a large and experimentally relevant parameter space. Specifically, we calculate the mean-field phase diagram, assuming uniform grafting of the two polymers, as a function of the nanoparticle size relative to the length of the grafted chains, the grafting density, the enthalpic repulsion between the grafted chains, and the solvent quality. We find a variety of phases including a Janus phase and phases with varying numbers of striped domains. Using a nonuniform, random distribution of grafting sites on the nanoparticle instead of the uniform distribution leads to the development of defects in the mixed brush structures. Introducing fluctuations as well leads to increasingly defective structures for the striped phases. However, we find that the simple Janus phase is preserved in all calculations, even with the introduction of nonuniform grafting and fluctuations. We conclude that the formation of the Janus phase is more realistic experimentally than is the formation of defect-free multivalent mixed brush nanoparticles.

Fabrication of microstructured binary polymer brush "corrals" with integral pH sensing for studies of proton transport in model membrane systems.

Binary brush structures consisting of poly(cysteine methacrylate) (PCysMA) "corrals" enclosed within poly(oligoethylene glycol methyl ether methacrylate) (POEGMA) "walls" are fabricated simply and efficiently using a two-step photochemical process. First, the C-Cl bonds of 4-(chloromethyl)phenylsilane monolayers are selectively converted into carboxylic acid groups by patterned exposure to UV light through a mask and POEGMA is grown from unmodified chlorinated regions by surface-initiated atom-transfer radical polymerisation (ATRP). Incorporation of a ratiometric fluorescent pH indicator, Nile Blue 2-(methacryloyloxy)ethyl carbamate (NBC), into the polymer brushes facilitates assessment of local changes in pH using a confocal laser scanning microscope with spectral resolution capability. Moreover, the dye label acts as a radical spin trap, enabling removal of halogen end-groups from the brushes via in situ dye addition during the polymerisation process. Second, an initiator is attached to the carboxylic acid-functionalised regions formed by UV photolysis in the patterning step, enabling growth of PCysMA brushes by ATRP. Transfer of the system to THF, a poor solvent for PCysMA, causes collapse of the PCysMA brushes. At the interface between the collapsed brush and solvent, selective derivatisation of amine groups is achieved by reaction with excess glutaraldehyde, facilitating attachment of aminobutyl(nitrile triacetic acid) (NTA). The PCysMA brush collapse is reversed on transfer to water, leaving it fully expanded but only functionalized at the brush-water interface. Following complexation of NTA with Ni2+, attachment of histidine-tagged proteorhodopsin and lipid deposition, light-activated transport of protons into the brush structure is demonstrated by measuring the ratiometric response of NBC in the POEGMA walls.

Structure and properties of polydisperse polyelectrolyte brushes studied by self-consistent field theory.

Two complementary self-consistent field theoretical approaches are used to analyze the equilibrium structure of binary and ternary brushes of polyions with different degrees of polymerization. Stratification in binary brushes is predicted: the shorter chains are entirely embedded in the proximal sublayer depleted of end-points of longer chains while the peripheral sublayer contains exclusively terminal segments of longer chains. The boundary between sublayers is enriched with counterions that neutralize the residual charge of the proximal sublayer. These analytical predictions for binary brushes are confirmed and extended to ternary brushes using the numerical Scheutjens-Fleer approach.

Design of binary polymer brushes with tuneable functionality.

Using coarse grained molecular dynamics simulations, we study how functionalized binary brushes may be used to create surfaces whose functionality can be tuned. Our model brushes consist of a mixture of nonresponsive polymers with functionalized responsive polymers. The functional groups switch from an exposed to a hidden state when the conformations of the responsive polymers change from extended to collapsed. We investigate quantitatively which sets of brush parameters result in optimal switching in functionality, by analyzing to which extent the brush conformation allows an external object to interact with the functional groups. It is demonstrated that brushes with species of comparable polymer lengths, or with longer responsive polymers than nonresponsive polymers, can show significant differences in their functionality. In the latter case, either the fraction of responsive polymers or the total grafting density has to be reduced. Among these possibilities, a reduction of the fraction of responsive polymers is shown to be most effective.

Random binary brush architecture enhances both ionic conductivity and mechanical strength at room temperature

The ionic conductivity and the mechanical strength are two key factors for the performance of poly(ethylene oxide) (PEO) based polyelectrolytes. However, crystallized PEO suppresses ion conductivity at low temperature and melted PEO has low mechanical strength at high temperature. Here, random binary brush copolymer composed of PEO- and polystyrene (PS)-based side chains is synthesized. PEO crystallinity is suppressed by the introduction of PS brushes. Doping with lithium trifluoromethanesulfonate (LiTf) induces microphase separation. Due to a random arrangement of the brushes, the microphase segregation is incomplete even at high salt loading, which provides both high ionic conductivity and high mechanical strength at room temperature. These results provide opportunities for the design of polymeric electrolytes to be used at room temperature.

In Situ Monitoring of Linear RGD-Peptide Bioconjugation with Nanoscale Polymer Brushes.

Bioinspired materials mimicking the native extracellular matrix environment are promising for biotechnological applications. Particularly, modular biosurface engineering based on the functionalization of stimuli-responsive polymer brushes with peptide sequences can be used for the development of smart surfaces with biomimetic cues. The key aspect of this study is the in situ monitoring and analytical verification of the biofunctionalization process on the basis of three complementary analytical techniques. In situ spectroscopic ellipsometry was used to quantify the amount of chemisorbed GRGDS at both the homopolymer poly(acrylic acid) (PAA) brush and the binary poly(N-isopropylacrylamide) (PNIPAAm)–PAA brushes, which was finally confirmed by an acidic hydrolysis combined with a subsequent reverse-phase high-performance liquid chromatography analysis. In situ attenuated total reflection-Fourier transform infrared spectroscopy provided a step-by-step detection of the biofunctionalization process so that an optimized protocol for the bioconjugation of GRGDS could be identified. The optimized protocol was used to create a temperature-responsive binary brush with a high amount of chemisorbed GRGDS, which is a promising candidate for the temperature-sensitive control of GRGDS presentation in further cell-instructive studies.

Precise control of surface electrostatic forces on polymer brush layers with opposite charges for resistance to protein adsorption.

Various molecular interaction forces are generated during protein adsorption process on material surfaces. Thus, it is necessary to control them to suppress protein adsorption and the subsequent cell and tissue responses. A series of binary copolymer brush layers were prepared via surface-initiated atom transfer radical polymerization, by mixing the cationic monomer unit and anionic monomer unit randomly in various ratios. Surface characterization revealed that the constructed copolymer brush layers exhibited an uniform super-hydrophilic nature and different surface potentials. The strength of the electrostatic interaction forces operating on these mixed-charge copolymer brush surfaces was evaluated quantitatively using force-versus-distance (f-d) curve measurements by atomic force microscopy (AFM) and probes modified by negatively charged carboxyl groups or positively charged amino groups. The electrostatic interaction forces were determined based on the charge ratios of the copolymer brush layers. Notably, the surface containing equivalent cationic/anionic monomer units hardly interacted with both the charged groups. Furthermore, the protein adsorption force and the protein adsorption mass on these surfaces were examined by AFM f-d curve measurement and surface plasmon resonance measurement, respectively. To clarify the influence of the electrostatic interaction on the protein adsorption behavior on the surface, three kinds of proteins having negative, positive, and relatively neutral net charges under physiological conditions were used in this study. We quantitatively demonstrated that the amount of adsorbed proteins on the surfaces would have a strong correlation with the strength of surface-protein interaction forces, and that the strength of surface-protein interaction forces would be determined from the combination between the properties of the electrostatic interaction forces on the surfaces and the charge properties of the proteins. Especially, the copolymer brush surface composed of equivalent cationic/anionic monomer units exhibited no significant interaction forces, and dramatically suppressed the adsorption of proteins regardless of their charge properties. We conclude that the established methodology could elucidate relationship between the protein adsorption behavior and molecular interaction, especially the electrostatic interaction forces, and demonstrated that the suppression of the electrostatic interactions with the ionic functional groups would be important for the development of new polymeric biomaterials with a high repellency of protein adsorption.

Binary Polymer Brushes of Strongly Immiscible Polymers.

The phenomenon of microphase separation is an example of self-assembly in soft matter and has been observed in block copolymers (BCPs) and similar materials (i.e., supramolecular assemblies (SMAs) and homo/block copolymer blends (HBCs)). In this study, we use microphase separation to construct responsive polymer brushes that collapse to generate periodic surfaces. This is achieved by a chemical reaction between the minor block (10%, poly(4-vinylpyridine)) of the block copolymer and a substrate. The major block of polystyrene (PS) forms mosaic-like arrays of grafted patches that are 10-20 nm in size. Depending on the nature of the assembly (SMA, HBC, or neat BCP) and annealing method (exposure to vapors of different solvents or heating above the glass transition temperature), a range of "mosaic" brushes with different parameters can be obtained. Successive grafting of a secondary polymer (polyacrylamide, PAAm) results in the fabrication of binary polymer brushes (BPBs). Upon being exposed to specific selective solvents, BPBs may adopt different conformations. The surface tension and adhesion of the binary brush are governed by the polymer occupying the top stratum. The "mosaic" brush approach allows for a combination of strongly immiscible polymers in one brush. This facilitates substantial contrast in the surface properties upon switching, previously only possible for substrates composed of predetermined nanostructures. We also demonstrate a possible application of such PS/PAAm brushes in a tunable bioadhesion-bioadhesive (PS on top) or nonbioadhesive (PAAm on top) surface as revealed by Escherichia coli bacterial seeding.