Bimetallic AuPd Research Articles

Electrocatalytic ammonia synthesis on bimetallic AuPd porous structures

In industry, production of ammonia mainly relies on the intensive Haber-Bosch process, but it consumes high energy with low efficiency and generates a large number of green-house gases. Electrocatalytic nitrogen reduction reaction (ENRR), as an alternative method for fixing N2 under ambient conditions, provides a feasible strategy for sustainable development of N2 cycle storage and utilization of renewable energy. However, traditional nanocatalysts exhibit extremely poor ENRR performance due to low activity of the solid structure and intense hydrogen evolution reactions of single component. Herein, we design and prepare porous gold–palladium nanoalloys (pAuPdNs), which effectively enhance ENRR by the excellent catalytic activity of Au and the significant N2 fixation ability of Pd, as well as the nanoporous structure and synergistic effect between alloy components. The electrochemical results show the NH3 yield of the catalyst is as high as 43.6 μg·h−1·cm−2, and Faradaic efficiency reaches 43.8%, which are superior to the performances of most reported water-based ENRR electrocatalysts. Besides, the selectivity of 95% and stability also exhibit enhancement than numerous reported researches. As compared with solid alloy and porous Au or Pd structures, the superiority of pAuPdNs states the influence of alloying and porous structure. Hence pAuPdNs are proved to be the efficient, stable, and promising electrocatalysts for N2 reduction reaction at ambient temperature and atmospheric pressure.

Facile interfacial synthesis of thin AuPd alloy nanowires for plasmon-enhanced selective photocatalytic oxidation of benzyl alcohol

Bimetallic AuPd plasmonic photocatalyst is a promising candidate for catalyzing selective oxidation of aromatic alcohol. However, developing a simple one-step method for the preparation of free-standing AuPd nanostructures with excellent photocatalytic performance remains a huge challenge. Here, a facile liquid–liquid interface route was exploited to one-pot prepare free-standing AuPd alloy nanowires (NWs) under mild conditions. Specifically, Au1Pd1 NWs are grown via oriented attachment at chloroform-water interface and 40 °C with Na2PdCl4 and HAuCl4 as precursors and 1-naphthol as reductant. Au1Pd1 NWs possess many advantages, such as thin diameter (4.0 nm), large aspect ratio, abundant defects and strong Au-Pd electronic interaction. During benzyl alcohol oxidation to benzaldehyde, Au1Pd1 NWs exhibit excellent photocatalytic activity and durability. At 40 min of visible light illumination, 98 % conversion of benzyl alcohol and 100 % selectivity to benzaldehyde are finished. After five cycles, Au1Pd1 NWs still maintain high photocatalytic activity. Compared to pure Au NWs, alloying Pd with Au in Au1Pd1 NWs dramatically enhances photocatalytic activity. The results indicate that the generated abundant •O2– under illumination play an important role in significantly improving benzyl alcohol oxidation to benzaldehyde.

Refining laser-induced dewetting for bimetallic Au–Pd nanoparticle synthesis on ZnO thin films: Optimizing fluence for substrate integrity

We report the fabrication of metal alloy Au–Pd nanoparticles on semiconductor thin film substrates (ZnO) by laser-induced dewetting. Employing a UV excimer laser, a single pulse was directed onto a three-layer film stack on a glass substrate: glass/ZnO/Au/Pd and glass/ZnO/Pd/Au. We simulated the temperature attained by the thin films enabling the prediction of energy thresholds required for melting the metal films but avoiding modifying the ZnO film. A specific range is reported of the pulse energy conducive to nanoparticle formation and the energy threshold required to modify the ZnO film beneath them. Depending on the pulse energy applied, the mean diameter of the nanoparticles varied from approximately 150 to around 70 nm. Notably, higher fluences resulted in smaller particles but also induced surface cracks in the ZnO film. Additionally, we observed a reduction in nanoparticle size with increased Pd content. Our results show that laser-induced dewetting can produce bimetallic alloy nanoparticles and, at the same time, ensure the preservation of the optical properties of the ZnO film. This approach opens avenues for tailoring material characteristics and expanding the range of applications of metal nanoparticles on semiconductor-based systems.

Bimetallic Au and Pd Nanoparticles Modified WO3 Nanosheets for Enhancing the Sensitivity and Selectivity of Formaldehyde Assessment in Aquatic Products.

Formaldehyde, a common illegal additive in aquatic products, poses a threat to people's health and lives. In this study, a novel metal oxide semiconductor gas sensor based on AuPd-modified WO3 nanosheets (NSs) had been developed for the highly efficient detection of formaldehyde. WO3 NS modified with 2.0% AuPd nanoparticles showed a higher response (Ra/Rg = 94.2) to 50 ppm of formaldehyde at 210 °C, which was 36 times more than the pristine WO3 NS. In addition, the AuPd/WO3 gas sensor had a relatively short response/recovery time of 10 s/9 s for 50 ppm of formaldehyde at 210 °C, with good immunity to other interfering gases and good stability for formaldehyde. The excellent gas-sensitive performance was attributed to the chemical sensitization of Au, the electronic sensitization of Pd, and the synergistic effect of bimetallic AuPd, which facilitated the recognition and response of formaldehyde molecules. Additionally, the high sensitivity and broad application prospect of the 2.0% AuPd/WO3 NS composite-based sensor in real sample detection were also confirmed by using the above sensor for the detection of formaldehyde in aquatic products such as squid and shrimp.

Enhanced Photocatalytic Activity of Surface‐Modified TiO2 with Bimetallic AuPd Nanoalloys for Hydrogen Generation

Herein, commercial titania (TiO2‐P25) is modified with mono‐ and bi‐metallic (Au, Pd, and AuPd) nanoparticles synthesized by chemical reduction method using NaBH4 as a strong reducing agent at room temperature. Bimetallic AuPd nanoalloys homogeneous in size and well dispersed on the TiO2 surface are obtained. The charge‐carrier dynamics, which is a key factor in photocatalysis, is studied by time‐resolved microwave conductivity. The results reveal that surface modification plays a crucial role in charge‐carrier separation, increasing the activity under UV–vis light irradiation. The bimetallic AuPd nanoalloys formation is confirmed by high‐angle annular dark field scanning transmission electron microscopy and corroborated by semiempirical molecular dynamics simulations (Gupta‐LAMMPS). The surface‐modified TiO2 with bimetallic AuPd nanoalloys exhibits higher photocatalytic activity compared to TiO2 modified with their monometallic counterparts. The experimental results are also supported by density functional theory and density functional tight binding calculations, which show that alloying AuPd with low Pd content presents significant synergetic effects for hydrogen generation under UV–vis light from aqueous triethanolamine solutions. Additionally, the AuPd/TiO2 photocatalysts are stable with cycling.

Enhanced Acetone Sensing Properties Based on Au-Pd Decorated ZnO Nanorod Gas Sensor.

The mature processes of metal oxide semiconductors (MOS) have attracted considerable interest. However, the low sensitivity of metal oxide semiconductor gas sensors is still challenging, and constrains its practical applications. Bimetallic nanoparticles are of interest owing to their excellent catalytic properties. This excellent feature of bimetallic nanoparticles can solve the problems existing in MOS gas sensors, such as the low response, high operating temperature and slow response time. To enhance acetone sensing performance, we successfully synthesized Au-Pd/ZnO nanorods. In this work, we discovered that Au-Pd nanoparticles modified on ZnO nanorods can remarkably enhance sensor response. The Au-Pd/ZnO gas sensor has long-term stability and an excellent response/recovery process. This excellent sensing performance is attributed to the synergistic catalytic effect of bimetallic AuPd nanoparticles. Moreover, the electronic and chemical sensitization of noble metals also makes a great contribution. This work presents a simple method for preparing Au-Pd/ZnO nanorods and provides a new solution for the detection of acetone based on metal oxide semiconductor.

Engineering of bimetallic Au–Pd alloyed particles on nitrogen defects riched g-C3N4 for efficient photocatalytic hydrogen production

The application of metal catalysis has gained prominence as a study area in recent years. In this work, we use adsorptive reduction and calcination to create Au–Pd alloy catalysts on COCN-2 with varying metal loadings. The plasma resonance effect of the alloys increases the photoresponse of the catalysts, and the engineering of nitrogen defects strengthens the strong bonds between Au–Pd alloy particles and carbon nitride graphite, optimizing the electronic structure, encouraging electron-directed migration, and increasing the efficiency of the reduction reaction. As a result, the efficiency of hydrogen generation by the Au–Pd0.6/COCN-2 catalyst is 5.089 mmol g−1 h−1, which is 2367 times higher than that of the g-C3N4 catalyst. Our findings highlight the crucial part that flaws play in strengthening the strong bonds that exist between the metal and the support, which enhances photocatalytic hydrogen generation. This work offers insightful information about creating effective photocatalysts.

Boosting Solvent-Free Aerobic Oxidation of Benzylic Compounds into Ketones over Au-Pd Nanoparticles Supported by Porous Carbon

The exploitation of highly efficient solvent-free catalytic systems for the selective aerobic oxidation of benzylic compounds to produce corresponding ketones with molecular oxygen under mild conditions remains a great challenge in the chemical industry. In this work, Au-Pd nanoparticles supported on porous carbon catalysts were fabricated by the borax-mediated hydrothermal carbonization method and the chemical reduction method. The physicochemical properties of Au-Pd bimetallic samples were examined by XRD, N2 sorption, SEM, TEM, and XPS techniques. The Au-Pd nanoparticles have successfully immobilized on the spherical carbon support with a porous structure and large surface area. A solvent-free catalytic oxidation system was constructed to selectively convert indane into indanone with Au-Pd nanocatalysts and O2. In contrast with a monometallic Au or Pd catalyst, the resulting bimetallic Au-Pd catalyst could effectively activate O2 and exhibit improved catalytic activity in the controlled oxidation of indane into indanone under 1 bar O2. A total of 78% conversion and >99% selectivity toward indanone can be achieved under optimized conditions. The synergistic effect of Au and Pd and porous carbon support contributed to the high catalytic activity for aerobic benzylic compound oxidation. This work offers a promising application prospect of efficient and recyclable Au-Pd nanocatalysts in functional benzylic ketone production.

Dumbbell-shaped bimetallic AuPd nanoenzymes for NIR-II cascade catalysis-photothermal synergistic therapy

The noble metal NPs that are currently applied to photothermal therapy (PTT) have their photoexcitation location mainly in the NIR-I range, and the low tissue penetration limits their therapeutic effect. The complexity of the tumor microenvironment (TME) makes it difficult to inhibit tumor growth completely with a single therapy. Although TME has a high level of H2O2, the intratumor H2O2 content is still insufficient to catalyze the generation of sufficient hydroxide radicals (‧OH) to achieve satisfactory therapeutic effects. The AuPd-GOx-HA (APGH) was obtained from AuPd bimetallic nanodumbbells modified by glucose oxidase (GOx) and hyaluronic acid (HA) for photothermal enhancement of tumor starvation and cascade catalytic therapy in the NIR-II region. The CAT-like activity of AuPd alleviates tumor hypoxia by catalyzing the decomposition of H2O2 into O2. The GOx-mediated intratumoral glucose oxidation on the one hand can block the supply of energy and nutrients essential for tumor growth, leading to tumor starvation. On the other hand, the generated H2O2 can continuously supply local O2, which also exacerbates glucose depletion. The peroxidase-like activity of bimetallic AuPd can catalyze the production of toxic ‧OH radicals from H2O2, enabling cascade catalytic therapy. In addition, the high photothermal conversion efficiency (η = 50.7 %) of APGH nanosystems offers the possibility of photothermal imaging-guided photothermal therapy. The results of cell and animal experiments verified that APGH has good biosafety, tumor targeting, and anticancer effects, and is a precious metal nanotherapeutic system integrating glucose starvation therapy, nano enzyme cascade catalytic therapy, and PTT therapy. This study provides a strategy for photothermal-cascade catalytic synergistic therapy combining both exogenous and endogenous processes. Statement of SignificanceAuPd-GOx-HA cascade nanoenzymes were prepared as a potent cascade catalytic therapeutic agent, which enhanced glucose depletion, exacerbated tumor starvation and promoted cancer cell apoptosis by increasing ROS production through APGH-like POD activity. The designed system has promising photothermal conversion ability in the NIR-II region, simultaneously realizing photothermal-enhanced catalysis, PTT, and catalysis/PTT synergistic therapy both in vitro and in vivo. The present work provides an approach for designing and developing catalytic-photothermal therapies based on bimetallic nanoenzymatic cascades.

The effect of surface conditions on the electrochemical CO2 reduction performance of bimetallic AuPd electrocatalysts

Most research into electrochemical CO2 reduction focusses on improving catalysts, but neglects electrolyte effects. We show the buffer influence on the selectivity of a gold–palladium electrode and elucidate inconsistencies between earlier studies.

Effect of Electrode Potential on the Surface Chemical Composition of Au-Pd Nanoparticles

Palladium (Pd) nanoparticles have been investigated for the hydrogen evolution reaction, the hydrogen oxidation reaction, the oxygen reduction reaction, and the methanol and ethanol oxidation reaction. The high methanol/ethanol tolerance of Pd is noteworthy.A powerful approach to further improving the catalytic properties of Pd is through alloying with suitable co-metals. In the case of the ethanol oxidation reaction in alkaline media, Pd alloyed with Au has demonstrated excellent activity exceeding even that of highly active Pt catalysts (1). A complete miscibility, small lattice mismatch, and contrasting properties of Pd and Au make Au-Pd a unique model system. Marked changes in the reactivity of Au-Pd catalysts have been reported when conditioning and operating conditions are altered, which should be related to physico-chemical changes in the nanoparticles. Indeed, dealloying/dissolution and segregation of metals at the surface of nanoparticles (NPs) takes place during conditioning and operation, which have pronounced effect on the activity and stability of NPs. The migration of metals from the bulk to the nanoparticles’ surface may take place during pre-catalytic conditioning and during operation, and can be triggered by the presence of oxidation and reducing agents (2), changes in temperature, and potential cycling (3). Thus, it is critical to investigate the effect of electrode potential on metals dissolution and segregation occurring in alloyed nanoparticles.In the present work, Au-Pd NPs prepared by pulsed laser ablation in liquids were used. Pulsed laser ablation is a simple method to synthesize alloy NPs with high purity out of different material systems and with different compositions. Typically, alloy-metal targets or pressed micro-powder mixture targets are ablated or fragmentated in liquid, respectively. Notably, the technique does not require any surfactant additives to achieve NPs stability in the electrolyte, thus allowing for NPs to remain free of associated contamination from the capping agents. We will show how one can fine-tuned the Au and Pd surface fraction of bimetallic Au-Pd nanoparticles using electrochemistry. The method involves electrochemical cycling in alkaline medium at a suitable upper vertex potential, resulting in a controllable diffusion of Pd atoms from the core to the shell. This preferential outward diffusion of Pd atoms occurs because of the electrochemical adsorption of oxygen atoms at the surface of NPs, which is driven by the application of a potential. This potential has to be positive enough for oxygen atoms to adsorb at the surface of the NPs, and therefore is dependent on the nature of the surface atoms. On AuPd NPs that are enriched with Au atoms, a potential of +1.5 V vs. RHE must be applied to form ca. 1 ML of adsorbed oxygen at the surface of gold and initiate the diffusion of Pd atoms from the core to the NP surface. This approach marks a new avenue in the development of compositionally-controlled electrocatalysts and can be tailored to suit different applications with a simple switch of voltage or a controlled pretreatment.

Bimetallic Au–Pd nanoparticles decorated electrospun spinel CoFe2O4 nanostructures as efficient electrocatalysts for ethanol fuel oxidation in alkaline media

Spinel-based materials are promising candidates as electro-catalysts for the oxidation of alcohol fuels. In the present study, electrospun CoFe2O4 spinel nanostructures were prepared by electrospinning technique and the subsequent thermal treatment processes. Then, the bimetallic Au–Pd–CoFe2O4 composite as electro-catalysts were synthesized by precipitation method. The surface morphology, composition and structure of the resulting composite nanostructures were studied by FE-SEM, EDS, TEM, XPS, XRD and FT-IR. The catalytic performance of resultant composite has been examined in ethanol electro-oxidation reactions under alkaline conditions. The effect of different Au:Pd ratios on the electrocatalytic performance of Au–Pd–CoFe2O4 composite nanostructures for ethanol oxidation was evaluated. The synthesized composite Au–Pd–CoFe2O4 (APCo22) illustrates a superior ethanol oxidation activity in comparison to other electrocalysts, and the peak current of this spinel-type electro-catalysts is 9.89 times that of Pd–CoFe2O4 with a scan rate of 50 mVs−1, which is due to the synergistic effect of Au and Pd on CoFe2O4. Furthermore, the remarkable electrochemical property can be due to the production of OH−, which leads to the species present on the surface of the electro-catalysts during the activation process.

A Facile Synthesis Route to AuPd Alloys for the Selective Oxidation of 5-Hydroxymethylfurfural to 2,5-Furandicarboxylic Acid.

Synthesis of 2,5-furandicarboxylic acid (FDCA) can be achieved via catalytic oxidation of 5-hydroxymethylfurfural (5-HMF), in which both base and catalyst play important roles. This work presents the development of a simple synthesis method (based on a commercial parent 10 wt.% Pd/C catalyst) to prepare the bimetallic AuPd alloy catalysts (i. e., AuPd/C) for selective 5-HMF oxidation to FDCA. When using the strong base of NaOH, Pd and Au cooperate to promote FDCA formation when deployed either separately (as a physical mixture of the monometallic Au/C and Pd/C catalysts) or ideally alloyed (AuPd/C), with complete 5-HMF conversion and FDCA yields of 66 % vs 77 %, respectively. However, NaOH also promoted the formation of undesired by-products, leading to poor mass balances (<81 %). Comparatively, under weak base conditions (using NaHCO3 ), an increase in Au loading in the AuPd/C catalysts enhances 5-HMF conversion and FDCA productivity (due to the enhanced carbonyl oxidation capacity) which coincides with a superior mass balances of >97 %. Yet, the excessive Pd content in the AuPd/C catalysts was not beneficial in promoting FDCA formation.

Synergistic effects of bimetallic Pd-Au(alloy)/SnO2 nanocomposites for low temperature and selective hydrogen gas sensors

In view of the explosive nature of hydrogen gas, the demand for detection is increasing. Although Pd-based chemiresistive sensors are gaining much attention in hydrogen detection, it is easily oxidized at high temperatures, leading to the deterioration of sensing performance. To address this issue, we synthesized bimetallic Pd-Au alloy nanoparticles (NPs) and mixed them with SnO2 powder for improving the hydrogen sensing performance. The response of the bimetallic Pd-Au(alloy)/SnO2 nanocomposites (NCs) sensor toward 100 ppm hydrogen was 72.78 which is 7 times higher than that of the pure SnO2 sensor at a relatively lower working temperature of 150°C. Furthermore, when compared to other interfering gases, the sensor revealed high selectivity for hydrogen gas. The enhanced hydrogen sensing performance was attributed to the synergistic effect arising from the formation of a heterojunction interface between Pd-Au alloy and SnO2 NPs and the decomposition and absorption of hydrogen molecules by Pd-Au alloy NPs.

Combining Deep Learning Neural Networks with Genetic Algorithms to Map Nanocluster Configuration Spaces with Quantum Accuracy at Low Computational Cost.

The configuration spaces for bimetallic AuPd nanoclusters of various sizes are explored efficiently and analyzed accurately by combining genetic algorithms with neural networks trained on density functional theory. The methodology demonstrated herein provides an optimizable solution to the problem of searching vast configuration spaces with quantum accuracy in a way that is computationally practical. We implement a machine learning algorithm which learns the density functional theory potential with increasing performance while simultaneously generating and relaxing structures within the system's global configuration space unbiasedly. As a result, the algorithm naturally converges onto the system's energy minima while mapping the configuration space as a function of energy. The algorithm's simple design applies not only to nanocluster configurations, as demonstrated, but to bulk, substrate, and adsorption sites as well, and it is designed to scale. To demonstrate its computational efficiency, we work with AuPd nanoclusters of sizes 15, 20, and 25 atoms. Results focus primarily on evaluating the algorithm's performance; however, several physical insights into possible configurations for these nanoclusters naturally emerge as well, such as geometric Au surface segregation and stoichiometric Au minimization as a function of stability.

Synthesis and Structural Characterization of Branched Bimetallic AuPd Nanoparticles with a Highly Tunable Optical Response.

Bimetallic nanostructures composed of gold (Au) and palladium (Pd) have garnered increased interest for their applications in heterogeneous catalysis. This study reports a simple strategy for manufacturing Au@Pd bimetallic branched nanoparticles (NPs), which offer a tunable optical response, using polyallylamine-stabilized branched AuNPs as template cores for Pd overgrowth. The palladium content can be altered by manipulating the concentration of PdCl42- and ascorbic acid (AA) that are injected, which permit an overgrowth of the Pd shell up to ca. 2 nm thick. The homogeneous distribution of Pd at the surfaces of Au NPs can be carried out regardless of their size or branching degree, which allows for an adjustment of the plasmon response in the near-infrared (NIR) spectral range. As a proof of concept, the nanoenzymatic activity of pure gold and gold-palladium NPs was compared, exploring their peroxidase-like activity in the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB). The bimetallic AuPd NPs demonstrate an increase in the catalytic properties attributed to the presence of palladium at the surface of gold.

From AuPd Nanoparticle Alloys towards Core‐Shell Motifs with Enhanced Alcohol Oxidation Activity

AbstractThe best activity of bimetallic AuPd nanoparticles for alcohol oxidation reaction is usually achieved by adjusting the Au/Pd molar ratio. Herein, alloy AuPd nanoparticles of ∼2.5–3.5 nm, ranging from Au‐rich to Pd‐rich compositions, were synthesized through a sol‐immobilization method. A calcination step under air conditions caused an increase in size up to 5.5 nm, but also driven the segregation of Pd to the surface, which generated an Au rich core with Pd on the shell. At high Pd content, the shell structure is formed by PdO. The catalytic activity of Pd‐rich samples (1 : 1, 1 : 2 and 1 : 4 Au : Pd) for benzyl alcohol oxidation increased ∼4‐fold after calcination. Upon reduction with H2, surface PdO motifs are reduced to Pd that did not dissolve back into the AuPd alloy core, maintaining the metallic Pd shell. The catalytic activity decreased. Therefore, restructuring alloyed AuPd nanoparticles into core‐shell like structures with PdO in the shell is beneficial to the catalytic activity, but reduction of PdO layer was detrimental. These results provide new insights on the optimization of AuPd catalysts, considering not only the Au/Pd molar ratio, but also the importance of PdO, which was not anticipated in the previous literature.

The porous hollow cobalt-based oxides encapsulated with bimetallic PdAu Nanoparticles of electrochemical biosensor for highly sensitive pesticides detection

Efficient and portable electrochemical biosensors are received to evaluation of pesticides in the environment, which can make great significance for food safety. In this study, the Co-based oxides with a kind of hierarchical porous hollow and nanocages were constructed, in which the materials (Co3O4-NC) were encapsulated with PdAu nanoparticles (NPs). Due to the unique porous structure, the changeable valence state of cobalt and the synergistic effect of bimetallic PdAuNPs, PdAu@Co3O4-NC possessed excellent electron pathways, and showed more exposed active sites. Accordingly, the porous Co-based oxides have been applied to construct an acetylcholinesterase (AChE) electrochemical biosensor, which showed good performance for organophosphorus pesticides (OPs) detection. The optimum biosensing platform based on nanocomposites was applied to exhibit highly sensitive determination of omethoate and chlorpyrifos, with the relative low detection limit of 6.125 × 10−15 M and 5.10 × 10−13 M, respectively. And a wide detection range of 6.125 × 10−15 ∼ 6.125 × 10−6 M and 5.10 × 10−13 ∼ 5.10 × 10−6 M for these two pesticides were achieved. Therefore, the PdAu@Co3O4-NC may represent a powerful tool for ultrasensitive sensing of OPs, and have great potential application.

A Study of the Laser-Assisted Alloying Effect on Plasmonic Properties of Au-Pd Nanostructured Film Using Surface-Enhanced Raman Spectroscopy

In this work, we report a study on the effect of the laser-assisted alloying effect on plasmonic properties of Pd and Au-Pd nanostructures using surface-enhanced Raman spectroscopy (SERS). The monometallic and bimetallic nanostructures are formed by nanosecond-laser induced de-wetting and the alloying of pure Pd and bimetallic Au-Pd nanoscale-thick films deposited on a transparent and conductive substrate. The morphological characteristics of the nanostructures were changed by controlling the laser fluence. Then, 4-nitrithiophenol (4-NTP) was used as an adsorbed molecule on the surface of the nanostructures to analyze the resulting SERS properties. A quantitative analysis was reported using the SERS profile properties, such as FWHM, amplitude, and Raman peak position variation. An excellent correlation between the variation of SERS properties and the nanostructures’ size was confirmed. The optical enhancement factor was estimated for Pd and Au-Pd nanostructures for the laser fluence (0, 0.5, 0.75, 1, and 1.5 J/cm2).

Structural Construction of Au–Pd Nanocomposite for Alkali-Free Oxidation of Benzyl Alcohol

A bimetallic Au-Pd system is an alternative candidate to catalyze primary alcohol oxidation and is of crucial importance for the sustainable chemical industry. However, understanding the bimetallic system in terms of the nanostructure is still challenging. Herein, we adopt the in situ colloid immobilization to obtain a series of bimetallic AuxPdy/CNT samples supported by carbon nanotubes (CNTs). Elaborate characterizations confirmed the bimetallic structure of AuPd alloy particles with randomly dispersed Pd2+ on the surface, forming the AuPd@PdO structure on CNTs. Unlike the monometallic samples, bimetallic ones, particularly Au1Pd1/CNT, efficiently transformed benzyl alcohol in an alkali-free mild condition. The DFT simulation confirmed the electron-rich gold atoms as a steric and electronic regulator to confine the electron-deficient Pd atoms in alloy particles. The interacted metal sites in the alloy system activated the alcohol with optimized adsorption configuration. Surface Pd2+ transported active oxygen to capture the abstracted H on alcohol. The collaboration between metal sites facilitated the transformation of benzyl alcohol to benzaldehyde with the selectivity of 91.8% by a fast TOF of 1274 h-1 at only 80 °C.