Bifunctional Ligand Research Articles

Self-assembled monolayer-based blue perovskite LEDs.

Blue perovskite light-emitting diodes (LEDs) have shown external quantum efficiencies (EQEs) of more than 10%; however, devices that emit in the true blue-those that accord with the emission wavelength required for Rec. 2100 primary blue-have so far been limited to EQEs of ~6%. We focused here on true blue emitting CsPbBr3 colloidal nanocrystals (c-NCs), finding in early studies that they suffer from a high charge injection barrier, a problem exacerbated in films containing multiple layers of nanocrystals. We introduce a self-assembled monolayer (SAM) active layer that improves charge injection. We identified a bifunctional capping ligand that simultaneously enables the self-assembly of CsPbBr3 c-NCs while passivating surface traps. We report, as a result, SAM-based LEDs exhibit a champion EQE of ~12% [CIE of (0.132, 0.069) at 4.0 V with a luminance of 11 cd/m2], and 10-fold-enhanced operating stability relative to the best previously reported Rec. 2100-blue perovskite LEDs.

Immobilization of open O-donor sites within a double-walled metal-organic framework for efficient C2H2/CO2 separation

Acetylene is an important industrial material for the production of acetaldehyde, acetic acid, benzene, synthetic rubber, synthetic fiber, etc., and its separation from the gas mixtures of C2H2/CO2 is of great importance but a challenging task due to their similar physical properties and molecular sizes. In this study, taking the advantage of open-donor sites on the pore surface as the nano-traps for C2H2 molecules, a new microporous metal-organic framework (MOF) formulated as {[Co3(OH)2(HCOO)2(CPT)2](NMF)2(MeOH)3(H2O)}n (1, NMF = N-methylformamide) has been prepared by virtue of a bifunctional organic ligand 4-(4H-1,2,4-triazol-4-yl)benzoic acid (HCPT), which showed discriminating sorption performance toward C2H2 (113 cm3/g at 298 K and 1 bar) over CO2 (33 cm3/g) under the same conditions. The different sorption behavior of {[Co3(OH)2(HCOO)2(CPT)2]}n between C2H2 and CO2 results in a high uptake ration (3.4:1) and IAST selectivity (13) at 298 K and 1 bar. Furthermore, the force-field based grand canonical Monte Carlo (GCMC) simulation results demonstrate that the large electronegativity and polarizability of open O donor sites on the pore surface contribute to its high C2H2/CO2 separation performance, leading to its more favorable C2H2 uptakes than CO2.

Bifunctional tracer-mediated sandwich ELISA: A novel and promising approach for highly selective and ultrasensitive detection of selenium

Our current work involves developing a sandwich enzyme-linked immunosorbent assay (ELISA) that utilizes biotinylated long-chain o-phenylenediamine dihydrochloride (Bio-lc-OPD·2 HCl) as a bifunctional ligand for highly selective and ultra-sensitive quantitative analysis of selenium (Se) in food samples. The approach has successfully achieved a remarkable limit of detection (LOD) at the femtomolar level, while also exhibiting a substantial enhancement in sensitivity, up to 32.7-fold higher than that of the traditional indirect competitive ELISA (ic-ELISA). We demonstrated the reliability and accuracy of our approach by assessing overall recoveries, ranging from 75.4% to 104.1% across four different Se species. To validate our proposed method, we conducted the Se detection in Se-rich food samples. The results exhibited high consistency with atomic absorption spectrometry (AAS) analysis, reaffirming the robustness of our sandwich ELISA. This purposed detection strategy emerges as a compelling alternative, offering simplicity, accuracy, and high sensitivity for Se detection.

Asymmetric Dearomatization of Phenols via Ligand-Enabled Cooperative Gold Catalysis.

By employing a chiral bifunctional phosphine ligand, a gold(I)-catalyzed efficient and highly enantioselective dearomatization of phenols is achieved via versatile metal-ligand cooperation. The reaction is proven to be remarkably general in scope, permitting substitutions at all four remaining benzene positions, accommodating electron-withdrawing groups including strongly deactivating nitro, and allowing carbon-based groups of varying steric bulk including tert-butyl at the alkyne terminus. Moreover, besides N-(o-hydroxyphenyl)alkynamides, the corresponding ynoates and ynones are all suitable substrates. Spirocyclohexadienone-pyrrol-2-ones, spirocyclohexadienone-butenolides, and spirocyclohexadenone-cyclopentenones are formed in yields up to 99 % and with ee up to 99 %.

Asymmetric Dearomatization of Phenols via Ligand‐Enabled Cooperative Gold Catalysis

AbstractBy employing a chiral bifunctional phosphine ligand, a gold(I)‐catalyzed efficient and highly enantioselective dearomatization of phenols is achieved via versatile metal‐ligand cooperation. The reaction is proven to be remarkably general in scope, permitting substitutions at all four remaining benzene positions, accommodating electron‐withdrawing groups including strongly deactivating nitro, and allowing carbon‐based groups of varying steric bulk including tert‐butyl at the alkyne terminus. Moreover, besides N‐(o‐hydroxyphenyl)alkynamides, the corresponding ynoates and ynones are all suitable substrates. Spirocyclohexadienone‐pyrrol‐2‐ones, spirocyclohexadienone‐butenolides, and spirocyclohexadenone‐cyclopentenones are formed in yields up to 99 % and with ee up to 99 %.

Spontaneous Resolution of Chiral Janus-Type Double-Layered Metallocyclic Strips Incorporating Möbius Ring and Circular Helicate.

Homochiral metal-organic macrocyclic complexes are of great significance owing to their chirality and well-defined internal cavities that potentially have the ability to mimic complicated biological processes. Here we report a novel metal/anion-coordination co-driven strategy for the formation of nanoscale supramolecular metallocycles with unique topology, large size, and desired chirality. The enantiomeric Janus-type metallocyclic strips are assembled based on the synergistic coordination of sulfate anions and CoII ions to a bifunctional achiral ligand combining the o-phenylene-(bis)urea anion-chelating and 8-hydroxyquinoline metal-coordinating sites. The inherent chirality arises from two types of helical chiralities (triply twisted Möbius ring and circular helicate), which is observed for the first time for metal-organic complex systems. Notably, spontaneous chiral resolution by conglomerate crystallization into a pair of enantiomers (P- or M-Co9) is realized, which is attributed to the multiple weak intermolecular interactions facilitating the hierarchically helical superstructure.

Retraction notice to “Two superior luminescent zinc(II) coordination polymers sensors based on a bifunctional groups ligand: Detecting trace nitro explosive picric acid” [Inorg. Chem. Commun. 105 (2019) 240-246

Retraction notice to “Two superior luminescent zinc(II) coordination polymers sensors based on a bifunctional groups ligand: Detecting trace nitro explosive picric acid” [Inorg. Chem. Commun. 105 (2019) 240-246

Nitro-benzylideneoxymorphone, a bifunctional mu and delta opioid receptor ligand with high mu opioid receptor efficacy.

Introduction: There is a major societal need for analgesics with less tolerance, dependence, and abuse liability. Preclinical rodent studies suggest that bifunctional ligands with both mu (MOPr) and delta (DOPr) opioid peptide receptor activity may produce analgesia with reduced tolerance and other side effects. This study explores the structure-activity relationships (SAR) of our previously reported MOPr/DOPr lead, benzylideneoxymorphone (BOM) with C7-methylene-substituted analogs. Methods: Analogs were synthesized and tested in vitro for opioid receptor binding and efficacy. One compound, nitro-BOM (NBOM, 12) was evaluated for antinociceptive effects in the warm water tail withdrawal assay in C57BL/6 mice. Acute and chronic antinociception was determined, as was toxicologic effects on chronic administration. Molecular modeling experiments were performed using the Site Identification by Ligand Competitive Saturation (SILCS) method. Results: NBOM was found to be a potent MOPr agonist/DOPr partial agonist that produces high-efficacy antinociception. Antinociceptive tolerance was observed, as was weight loss; this toxicity was only observed with NBOM and not with BOM. Modeling supports the hypothesis that the increased MOPr efficacy of NBOM is due to the substituted benzylidene ring occupying a nonpolar region within the MOPr agonist state. Discussion: Though antinociceptive tolerance and non-specific toxicity was observed on repeated administration, NBOM provides an important new tool for understanding MOPr/DOPr pharmacology.

Engineering Two-Dimensional Multilevel Supramolecular Assemblies from a Bifunctional Ligand on Au(111).

Herein, we demonstrate the supramolecular assemblies from a bifunctional ligand on Au(111), towards engineering two-dimensional (metal-) organic multilevel nanostructures. The bifunctional ligand employed, including two Br atoms and one carboxylic terminal, offers multiple bonding motifs with different configurations and binding energies. These bonding motifs are highly self-selective and self-recognizable, and thus afford the formation of subunits that contribute to engineering multilevel self-assemblies. Our scanning tunneling microscopy experiments, in combination with the density functional theory calculations, revealed various hydrogen, halogen and alkali-carboxylate bonding motifs dictating the different levels of the assemblies. The multilevel assembly protocol based on a judicious choice of multiple bonding motifs guarantees a deliberate control of surface-confined (metal-) organic nanostructures. Our findings may present new opportunities for the fabrication of complex two-dimensional (metal-) organic nanostructures with potential in applications of functionally diverse nanomaterials.

Universal and divergent P-stereogenic building with camphor-derived 2,3-diols

The access to P-stereogenic motifs has always been considered a very challenging and high attractive mission in modern organic synthesis. While several chiral auxiliaries employed by the practical Jugé-Stephan-like methodology have been developed, new type of readily accessible bifunctional ligands toward P-stereogenic building still remain much desirable. Herein, we present a powerful chiral template, camphor-derived 2,3-diols named CAMDOL, which were designed and synthesized from the commercially cheap camphorquinone in high yields at 50 grams scale with a column-free purification. Diverse P(III)-chiral compounds and their borane forms including phosphinous acids, phosphinites, and phosphines, as well as the corresponding P(V)-chiral compounds including phosphinates, phosphine oxides, phosphinothioates, phosphine sulfides, and secondary phosphine oxides were afforded in high yields and ee values through the optimal 2,3-diphenyl CAMDOL platform. An unusual C3-OP bond cleavage following the first P-OC2 bond breaking was observed during the ring-opening process when quenching by NH4Cl solution, which generates a unique but valuable camphor-epoxide scaffold as by-product.

Glycomimetic antagonists of BC2L-C lectin: insights from molecular dynamics simulations.

Opportunistic infections from multidrug-resistant pathogens such as Burkholderia cenocepacia are a threatening risk for hospital-bound patients suffering from immunocompromised conditions or cystic fibrosis. B. cenocepacia BC2L-C lectin has been linked to bacterial adhesion and biofilm formation, thus hindering its activity is seen as a promising strategy to reduce the severity of the infection. We recently described the first bifunctional ligands of the trimeric N-terminal domain of BC2L-C (BC2L-C-Nt), capable of simultaneously engaging its fucose-specific sugar binding site and a vicinal region at the interface between two monomers. Here, we report a computational workflow for the study of these glycomimetic bifunctional ligands in complex with BC2L-C-Nt, aimed at investigating the molecular basis of ligand binding and the dynamics of glycomimetic/lectin interactions. In particular, we evaluated the use of molecular docking in the protein trimer, followed by refinement using MM-GBSA re-scoring and MD simulations in explicit water. Computational results were compared to experimental data derived from X-ray crystallography and isothermal titration calorimetry. The computational protocol proved suitable to provide a reliable description of the interactions between the ligands and BC2L-C-Nt, highlighting the contribution of MD simulations in explicit solvent for a good fit with the experimental observations. The information achieved in the study and the whole workflow appear promising for the structure-based design of improved BC2L-C-Nt ligands as novel antimicrobials with antiadhesive properties.

Effect of Acidic Strength of Surface Ligands on the Carrier Relaxation Dynamics of Hybrid Perovskite Nanocrystals.

Perovskite nanocrystals (PeNCs) are known for their use in numerous optoelectronic applications. Surface ligands are critical for passivating surface defects to enhance the charge transport and photoluminescence quantum yields of the PeNCs. Herein, we investigated the dual functional abilities of bulky cyclic organic ammonium cations as surface-passivating agents and charge scavengers to overcome the lability and insulating nature of conventional long-chain type oleyl amine and oleic acid ligands. Here, red-emitting hybrid PeNCs of the composition CsxFA(1-x)PbBryI(3-y) are chosen as the standard (Std) sample, where cyclohexylammonium (CHA), phenylethylammonium (PEA) and (trifuluoromethyl)benzylamonium (TFB) cations were chosen as the bifunctional surface-passivating ligands. Photoluminescence decay dynamics showed that the chosen cyclic ligands could successfully eliminate the shallow defect-mediated decay process. Further, femtosecond transient absorption spectral (TAS) studies uncovered the rapidly decaying non-radiative pathways; i.e., charge extraction (trapping) by the surface ligands. The charge extraction rates of the bulky cyclic organic ammonium cations were shown to depend on their acid dissociation constant (pKa) values and actinic excitation energies. Excitation wavelength-dependent TAS studies indicate that the exciton trapping rate is slower than the carrier trapping rate of these surface ligands.

Construction of redox-sensitive liposomes modified by glycyrrhetinic acid and evaluation of anti-hepatocellular carcinoma activity

The aim of this study was to construct a bifunctional liposome with hepatic-targeting capacity by modifying with a targeting ligand and an intracellular tumor reduction response functional group to deliver drugs precisely to focal liver tissues and release them in large quantities in hepatocellular carcinoma cells. This could improve drug efficacy and reduce toxic side effects at the same time. First, the bifunctional ligand for liposome was successfully obtained by chemically synthesizing it from the hepatic-targeting glycyrrhetinic acid (GA) molecule, cystamine, and the membrane component cholesterol. Then the ligand was used to modify the liposomes. The particle size, PDI and zeta potential of the liposomes were determined with a nanoparticle sizer, and the morphology was observed by transmission electron microscopy. The encapsulation efficiency and drug release behavior were also determined. Further, the stability in vitro of the liposomes and the changes in the simulated reducing environment were determined. Finally, the antitumor activity in vitro and cellular uptake efficiency of the drug-loaded liposomes were investigated by performing cellular assays. The results showed that the prepared liposomes had a uniform particle size of 143.6 ± 2.86 nm with good stability and an encapsulation rate of 84.3 ± 2.1 %. Moreover, the particle size of the liposomes significantly increased and the structure was destroyed in a DTT reducing environment. Cellular experiments showed that the modified liposoes had better cytotoxic effects on hepatocarcinoma cells than both normal liposomes and free drugs. This study has great potential for tumor therapy and provides novel ideas for the clinical use of oncology drugs in dosage forms.

A stable microporous framework with multiple accessible adsorption sites for high capacity adsorption and efficient separation of light hydrocarbons

Metal-organic frameworks (MOFs), a type of designable porous materials, are effectively employed to realize light hydrocarbons storage and separation in favor of energy conservation and environmental protection, superior to traditional separation technology. Significantly, a novel MOF, Ni2(L)2(HCOO)2·4H2O (1) has been constructed from a bifunctional group ligand of 3-hydroxy-4-(4H-1,2,4-triazol-4-yl) benzoic acid ligand (HL). MOF 1 possesses stable porous structure with narrow channels functionalized with multiple accessible adsorption sites of hydroxy group, carboxyl oxygen atoms from the L− and HCOO−, exhibiting a well trade-off between good capacity and selectivity for light hydrocarbons. The single-component sorption isotherm results of Ni2+ based MOF not only shows good gas sorption capacity for light hydrocarbons of C2H2, C2H6, C2H4, C3H8, and greenhouse gas CO2, especially remarkable uptake for C2H2 (122.0 cm3 g−1 at ambient condition), but also favorable selectivity for binary mixtures of C2H2/CH4, C2H6/CH4, C3H8/CH4, C2H4/CH4, C2H2/C2H4 as well as C3H8/C2H6/CH4 ternary mixture, as confirmed by ideal adsorbed solution theory (IAST) calculations, and dynamic breakthrough experiment. Grand canonical Monte Carlo (GCMC) simulation reveals the multiple synergism of accessible adsorption sites including functional OH groups, carboxylate groups, HCOO− and π···π stacking interaction between guest molecules and host-pore are crucial to contribute selective gas adsorption of light hydrocarbons.

Immobilized di(hydroperoxy)propane adducts of phosphine oxides as traceless and recyclable oxidizing agents

Oxidations represent important reactions that are ubiquitous in academia and industry. Hydrogen peroxide (H2O2) is a common source of active oxygen for oxidations. H2O2 is usually diluted in water as it is too unstable to be used in pure form. However, the presence of water can complicate reactions because biphasic mixtures with organic solvents form. Furthermore, secondary reactions with water may lead to side products. Therefore, alternative forms of H2O2, such as peroxide adducts, are an active area of research. Di(hydroperoxy)alkane adducts of phosphine oxides are one attractive solution because they are soluble in organic solvents, crystallizable, shelf-stable and active towards a variety of oxidation reactions. The only drawback is that the phosphine oxide carrier has to be removed after the reaction. In this contribution, the bifunctional ligand (EtO)3Si(CH2)2PPh2 is immobilized on a silica (SiO2) support which is subsequently end-capped with EtOSi(CH3)3. The new surface-bound di(hydroperoxy)propane adduct is then generated with the immobilized phosphine oxide as carrier. The adduct and a deuterated analog are characterized with solid-state and solution NMR spectroscopy. It has been demonstrated that substrates in organic solvents easily access the surface-bound peroxide and are oxidized quantitatively. The phosphine oxide carrier remains bound to the surface and can be removed easily by settling of the silica. Using the oxidative esterification of nonyl aldehyde it is proven that the immobilized peroxide adduct does not leach from the silica support and is active and reusable over multiple cycles.

Design of C1-symmetric tridentate ligands for enantioselective dearomative [3 + 2] annulation of indoles with aminocyclopropanes

Chiral polycyclic indolines are widely present in natural products and have become the focus of extensive synthetic efforts. Here, we show the catalytic asymmetric dearomative [3 + 2] annulation of indoles with donor-acceptor aminocyclopropanes to construct tricyclic indolines. Key to the success of the reaction is the rational design of C1-symmetric bifunctional tridentate imidazoline-pyrroloimidazolone pyridine ligand. Under 5 mol% of Ni(OTf)2-ligand complex, diverse tricyclic indolines containing cyclopentamine moieties are obtained in good chemoselectivities, high diastereoselectivities, and excellent enantioselectivities. An unusual cis-configuration ligand is superior to the trans-configuration ligand and the corresponding C2-symmetric tridentate nitrogen ligands in the annulation reaction. Mechanistic studies by control experiments and density functional theory calculations reveal a dual activation manner, where Ni(II) complex activates the aminocyclopropane via coordination with the geminal diester, and imidazolidine NH forms a H-bond with the succinimide moiety.

A C–H activation-based enantioselective synthesis of lower carbo[n]helicenes

The three-dimensional structure of carbohelicenes has fascinated generations of molecular chemists and has been exploited in a wide range of applications. Their strong circularly polarized luminescence has attracted considerable attention in recent years due to promising applications in new optical materials. Although the enantioselective synthesis of fused carbo- and heterohelicenes has been achieved, a direct catalytic enantioselective method allowing the synthesis of lower, non-fused carbo[n]helicenes (n = 4–6) is still lacking. We report here that Pd-catalysed enantioselective C–H arylation in the presence of a unique bifunctional phosphine-carboxylate ligand provides a simple and general access to these lower carbo[n]helicenes. Computational mechanistic studies indicate that both the C–H activation and reductive elimination steps contribute to the overall enantioselectivity. The observed enantio-induction seems to arise from a combination of non-covalent interactions and steric repulsion between the substrate and ligand during the two key reductive elimination steps. The photophysical and chiroptical properties of the synthesized scalemic [n]helicenes have been systematically studied.

Computational Study on Ni−Al Bimetal‐Catalyzed Twofold C−H Annulation Reaction: Mechanism, Origin of Selectivity, and Role of SPO Ligand

AbstractDensity functional theory calculations have been performed to probe the reaction mechanism of the recently reported twofold C−H annulation of arylformamides with alkynes by Ni−Al bimetallic catalysis. The main pathway consisted of the formyl C−H activation, phenyl C−H activation, migratory insertion, and reductive elimination steps in succession. The desired annulation product was found to be the equilibrium‐controlled product, while the minor hydrocarbamoylation product was the kinetics‐controlled product. Calculated free‐energy profiles indicated that the annulation and hydrocarbamoylation pathways could intersect with each other and merge into a mechanism unity, in which the reaction system entered the hydrocarbamoylation pathway in early stage and switched to the annulation pathway afterwards via suitable transition states. The modified mechanism picture demonstrated the phenyl C−H activation step to be the rate‐determining step with a free‐energy barrier of 27.7 kcal/mol. However, this barrier was only 19.4 kcal/mol on the basis of a single annulation pathway, which could not satisfactorily agree with the experimental conditions and kinetic isotope effects. In addition, the crucial role of the bifunctional secondary phosphine oxide ligand in promoting the reactivity and selectivity was elucidated in detail.

Site‐Selective C−H Alkenylation of N‐Heteroarenes by Ligand‐Directed Co/Al and Co/Mg Cooperative Catalysis**

AbstractWe report herein the design and development of Co/Al and Co/Mg bimetallic catalysts, supported by a phosphine/secondary phosphine oxide (PSPO) bifunctional ligand, for the site‐selective C−H alkenylation of nitrogen‐containing heteroarenes with alkynes. These catalysts enable the alkenylation of pyridine, pyridone, and imidazo[1,2‐a]pyridine derivatives at the C−H site proximal to the Lewis basic nitrogen or oxygen atom, which represents a selectivity profile distinct from that of the previously developed cobalt‐diphosphine/aluminum catalyst. The alkenylated products were obtained in moderate to good yields using various heterocycles and differently substituted internal alkynes. Kinetic isotope effect experiments suggest the irreversibility of the C−H activation step, the relevance of which to the rate‐limiting step depends on the reaction conditions. Density functional theory calculations indicate that ligand‐to‐ligand hydrogen transfer is the common mechanism of C−H activation.

Site-Selective C-H Alkenylation of N-Heteroarenes by Ligand-Directed Co/Al and Co/Mg Cooperative Catalysis.

We report herein the design and development of Co/Al and Co/Mg bimetallic catalysts, supported by a phosphine/secondary phosphine oxide (PSPO) bifunctional ligand, for the site-selective C-H alkenylation of nitrogen-containing heteroarenes with alkynes. These catalysts enable the alkenylation of pyridine, pyridone, and imidazo[1,2-a]pyridine derivatives at the C-H site proximal to the Lewis basic nitrogen or oxygen atom, which represents a selectivity profile distinct from that of the previously developed cobalt-diphosphine/aluminum catalyst. The alkenylated products were obtained in moderate to good yields using various heterocycles and differently substituted internal alkynes. Kinetic isotope effect experiments suggest the irreversibility of the C-H activation step, the relevance of which to the rate-limiting step depends on the reaction conditions. Density functional theory calculations indicate that ligand-to-ligand hydrogen transfer is the common mechanism of C-H activation.