Bi-cruciate Stabilized Total Knee Arthroplasty Research Articles

Lower Blood Loss with Bicruciate-Retaining Total Knee Arthroplasty Compared with Bicruciate-Stabilized Total Knee Arthroplasty.

Total knee arthroplasty (TKA) is a common surgical procedure to treat end-stage knee osteoarthritis. This study compared blood loss volume and other clinical outcomes between bicruciate-retaining (BCR) and bicruciate-stabilized (BCS) TKA. Ninety-seven participants who underwent unilateral TKA were enrolled. The BCS-TKA and BCR-TKA groups comprised 78 and 19 participants, respectively. Blood loss was calculated using preoperative and postoperative hematocrit values, height, weight, and sex. Measurements were taken immediately after surgery, on days 1 and 7, and total blood loss was calculated up to day 7. Operation time, range of motion at 7 and 14 days postoperatively, blood transfusion requirement, and postoperative complications such as infection, hematoma, and deep vein thrombosis were compared between the groups. Blood loss was comparable between groups at all time points (125.7 vs. 105.4 mL, 57.9 vs. 43.5 mL, and 68.2 vs. 41.7 mL for immediate, day 1, and day 7 postoperatively, respectively; all p > 0.05) except for total blood loss, which was significantly lower in the BCR group compared with the BCS group (190.7 vs. 251.1 mL; p < 0.05). The BCR group also had a longer operation time than the BCS group (131.2 vs. 112.4 minutes; p < 0.05). No other significant differences were observed in other outcomes. Total blood loss up to 7 days postoperatively was significantly lower in the BCR group than in the BCS group despite a longer operation time. This may be attributed to the reduced bone resection and greater soft tissue preservation, including the anterior cruciate and posterior cruciate ligaments, in the BCR technique.

Correlating Contact Kinematics to Tibial Component Migration Following Cemented Bicruciate Stabilized Total Knee Arthroplasty

BackgroundContact kinematics in total knee arthroplasty (TKA) has been shown to affect tibial component migration. However, previous studies correlating kinematic variables to implant migration were completed with older TKA designs. The goal of this study was to determine if there are associations between contact kinematics and tibial component migration for a cemented, bicruciate stabilized (BCS) TKA system. MethodsA total of 54 knees implanted with a BCS TKA system were analyzed using radiostereometric analysis (RSA). Patients underwent RSA exams at 2 weeks, 6 weeks, 3 months, 6 months, 1 year, and 2 years post operation to measure tibial component migration. At 1 year, contact kinematics was evaluated during a quasi-static deep knee bend. Linear regression analyses were performed between kinematic variables and migration values. ResultsSignificant correlations were found between contact kinematics and tibial component migration. Excursion on the lateral condyle was the most consistent variable correlating with implant migration. Six patients had > 0.2 mm migrations from 1 to 2 years post operation indicating continuously migrating tibial components, and most had atypical contact kinematics. ConclusionKinematics was shown to influence tibial component migration. Reduced lateral excursion, suggesting a more constrained lateral condyle, resulted in greater implant migration. The 6 patients who had continuously migrating tibial components had demographic factors that may limit the ability to endure unintended force transmissions caused by abnormal kinematics. These results highlight the importance of restoring knee kinematics with this BCS TKA design to minimize improper force transmissions and resultant increased implant migrations.

Guided-Motion Bicruciate-Stabilized Total Knee Arthroplasty Reproduces Native Medial Collateral Ligament Strain.

Background and Objectives: Guided-motion bicruciate-stabilized (BCS) total knee arthroplasty (TKA) includes a dual cam-post mechanism with an asymmetric bearing geometry that promotes normal knee kinematics and enhances anterior-posterior stability. However, it is unclear whether the improved biomechanics after guided-motion BCS TKA reproduce soft tissue strain similar to the strain generated by native knees. The purpose of this cadaveric study was to compare medial collateral ligament (MCL) strain between native and guided-motion BCS TKA knees using a video extensometer. Materials and Methods: Eight cadaver knees were mounted onto a customized knee squatting simulator to measure MCL strain during flexion in both native and guided-motion BCS TKA knees (Journey II-BCS; Smith & Nephew, Memphis, TN, USA). MCL strain was measured using a video extensometer (Mercury® RT RealTime tracking system, Sobriety s.r.o, Kuřim, Czech Republic). MCL strain level and strain distribution during knee flexion were compared between the native and guided-motion BCS TKA conditions. Results: The mean and peak MCL strain were similar between native and guided-motion BCS TKA knees at all flexion angles (p &gt; 0.1). MCL strain distribution was similar between native and BCS TKA knees at 8 of 9 regions of interest (ROIs), while higher MCL strain was observed after BCS TKA than in the native knee at 1 ROI in the mid portion of the MCL at early flexion angles (p &lt; 0.05 at ≤30° of flexion). Conclusions: Guided-motion BCS TKA restored the amount and distribution of MCL strain to the values observed on native knees.

What's New in Adult Reconstructive Knee Surgery.

What's New in Adult Reconstructive Knee Surgery.

Rotational mismatch between femoral and tibial components should be avoided in JOURNEY II bi-cruciate stabilized total knee arthroplasty

BackgroundJOURNEY II bi-cruciate stabilized (BCS) knee system, a guided motion total knee arthroplasty (TKA), has been reported to reproduce physiological knee kinematic motion with good clinical outcomes. However, this guided system may be sensitive to the femorotibial rotational alignment. MethodForty-four patients (50 knees) who underwent JOURNEY II BCS TKA were included in this retrospective study. The 2011 Knee Society Score (KSS) and range of motion were assessed pre-operatively and one year postoperatively. The femoral component rotational angle relative to the surgical epicondylar axis and the tibial component rotational angle relative to Akagi’s line were measured postoperatively. The absolute difference between the femoral and tibial component rotational angles was defined as femorotibial component rotational mismatch. The correlation between the parameters of these rotational alignments and postoperative clinical outcomes was evaluated. Additionally, receiver operating characteristic curve analysis was performed to determine the optimal cut-off point of the femorotibial component rotational mismatch. ResultsMean femoral and tibial component rotational angles were 0.4° (internal rotation) and 0.7° (external rotation), respectively. The rotational mismatch of the femorotibial component was 3.2°. There were negative correlations between femorotibial rotational mismatch and clinical outcomes, including objective knee indicators, patient satisfaction, functional activities, and total 2011 KSS. The area under the curve of the femorotibial component rotational mismatch was 0.768 and the cut-off value identified by the Youden index was 2.8°. ConclusionsExcessive rotational mismatch between the femoral and tibial components can negatively influence the clinical outcomes of JOURNEY II BCS TKA.

Femoral rollback at high-flexion during squatting is related to the improvement of sports activities after bicruciate-stabilized total knee arthroplasty: an observational study

BackgroundIn bicruciate-stabilized total knee arthroplasty (BCS-TKA), the relationship between the postoperative kinematics and sports subscales in patient-reported outcome measures (PROMs) remains unknown. The purpose of this study was to determine the relationship between kinematics and sports subscales using the PROMs after BCS-TKA.MethodsSixty-one patients with severe knee osteoarthritis were examined at 13.5 ± 7.8 months after BCS-TKA. The patients performed squats under single fluoroscopic surveillance in the sagittal plane. Range of motion of the knee, axial rotation of the femur relative to the tibial component, and anteroposterior (AP) translation of the medial and lateral femorotibial contact points were measured using a 2D-to-3D registration technique. In addition, the relationship between the kinematics and improvement of the sports subscales in the Knee Injury and Osteoarthritis Outcome Score (KOOS) was evaluated.ResultsIn rotation angle, the femoral external rotation was observed from 0 to 50° of flexion. The amount of femoral external rotation did not correlate with PROMs-SP. In medial AP translation, posterior translation was observed from 0 to 20° and 80–110° of flexion. Mild anterior translation was observed from 20 to 80° of flexion. Beyond 80° of flexion, posterior translation was positively correlated with squatting. In lateral AP translation, posterior translation was observed from 0 to 20° and 80–110° of flexion. Beyond 80° of flexion, posterior translation was positively correlated with running, jumping, twisting/pivoting, and kneeling.ConclusionFemoral rollback at high flexion during squatting may be important to improve sports performance after BCS-TKA.

Both Intraoperative Medial and Lateral Joint Stabilities at Midflexion Influence Postoperative Patient-Reported Outcome Measures Following Bi-Cruciate Stabilized Total Knee Arthroplasty.

Bi-cruciate stabilized (BCS) total knee arthroplasty (TKA) was developed to approximate normal knee kinematics and is expected to improve clinical outcomes. However, the effects of soft tissue balance at the medial or lateral compartment on patient-reported outcome measures (PROMs) following BCS TKA are unclear. The purpose of this study was to clarify the relationship between the medial or lateral component gaps and PROMs following BCS TKA. One hundred seventeen knees with varus deformities which underwent BCS TKA were included in this study. They were divided into two groups according to the validated Japanese version of the Knee Injury and Osteoarthritis Outcome Score for each subscale of pain, symptoms, and activities of daily living (ADL) at 1 year postoperatively: group H consisted of patients with ≥90 points and group L consisted of patients with <90 points. Intraoperative medial and lateral joint laxities at 0°, 30°, 60°, 90°, and 120° flexion measured using a tensor device were compared between the two groups in each subscale. In the pain subscale, the medial joint laxities at 30° (p < 0.05) and 60° flexion (p < 0.05) in group H were significantly smaller than those in group L. In the ADL subscale, the medial joint laxity at 60° flexion in group H was significantly smaller than that in group L (p < 0.05). In the symptom subscale, the lateral joint laxity at 60° flexion in group H was significantly smaller than that in group L (p < 0.05). Surgeons should pay attention to the importance of both medial and lateral joint stabilities to achieve better postoperative PROMs following BCS TKA.

Both intraoperative medial and lateral soft tissue balances influence intraoperative rotational knee kinematics in bi-cruciate stabilized total knee arthroplasty: A retrospective investigation

BackgroundTibial internal rotation following total knee arthroplasty (TKA) is important in achieving favorable postoperative clinical outcomes. Studies have reported the effect of intraoperative soft tissue balance on tibial internal rotation in conventional TKA, no studies have evaluated the effects of soft tissue balance at medial or lateral compartments separately on tibial internal rotation in bi-cruciate stabilized (BCS) TKA. The purpose of this study was to clarify the relationship between medial or lateral component gaps and rotational knee kinematics in BCS TKA.MethodsOne hundred fifty-eight knees that underwent BCS TKA were included in this study. The intraoperative medial and lateral joint laxities which was defined as the value of component gap minus the thickness of the tibial component were firstly divided into two groups, respectively: Group M-stable (medial joint laxity, ≤ 2 mm) or Group M-loose (medial joint laxity, ≥ 3 mm) and Group L-stable (lateral joint laxity, ≤ 3 mm) or Group L-loose (lateral joint laxity, ≥ 4 mm). And finally, the knees enrolled in this study were divided into four groups based on the combination of Group M and Group L: Group A (M-stable and L-stable), Group B (M-stable and L-loose), Group C (M-loose and L-stable), and Group D (M-loose and L-loose). The intraoperative rotational knee kinematics were compared between the four Groups at 0°, 30°, 60°, and 90° flexion, respectively.ResultsThe rotational angular difference between 0° flexion and maximum flexion in Group B at 30° flexion was significantly larger than that in Group A at 30° flexion (*p < 0.05). The rotational angular difference between 30° flexion and maximum flexion in Group B at 30° flexion was significantly larger than that in Group D at 30° flexion (*p < 0.05). The rotational angular differences between 30° or 90° flexion and maximum flexion in Group B at 60° flexion were significantly larger than those in Group A at 60° flexion (*p < 0.05).ConclusionSurgeons should pay attention to the importance of medial joint stability at midflexion and lateral joint laxities at midflexion and 90° flexion on a good tibial internal rotation in BCS TKA.

Comparison of in vivo knee kinematics before and after bicruciate-stabilized total knee arthroplasty during squatting

BackgroundNo studies have directly evaluated kinematic changes during squatting before and after bicruciate-stabilized total knee arthroplasty (BCS-TKA) with the dual cam-post mechanism and asymmetric surfaces. This study investigated the effect of BCS-TKA on changes to pre- and postoperative skeletal knee kinematics, to identify factors associated with postoperative skeletal kinematic parameters.MethodsSeventeen knees in 17 patients were prospectively recruited before primary TKA for advanced medial knee osteoarthritis. Subjects underwent BCS-TKA and were evaluated more than 1 year postoperatively. In vivo dynamic skeletal knee kinematics were evaluated using periodic radiographic images collected during squatting to quantify the tibiofemoral functional extension/flexion angle, anteroposterior (AP) translation, and axial rotation angle using image-matching techniques. Rotational alignments of femoral and tibial components were measured postoperatively using computed tomography images.ResultsThe pre- and postoperative tibiofemoral functional extension/flexion angles during squatting were 12.2° ± 6.7°/100.1° ± 16.8° and 9.6° ± 8.6°/109.4° ± 16.8°, respectively, with a significant difference in flexion angle (p < .05). Total AP translation was significantly larger postoperatively than preoperatively (10.8 mm ± 3.7 mm vs. 14.4 mm ± 4.2 mm, respectively; p < .05). The pre- and postoperative total rotation angles were 6.6° ± 3.0° and 6.4° ± 3.7°, respectively, indicating no significant difference. The pre- and postoperative tibiofemoral functional flexion angles were significantly associated with each other (p = .0434, r = .49). The postoperative total rotation angle was significantly smaller when the total component rotational mismatch angle between the femoral and tibial components was above 5° vs. below 5° (4.6° ± 2.7° vs. 8.3° ± 3.9°, respectively; p < .05).ConclusionsBCS-TKA significantly increased the tibiofemoral functional flexion angles, with larger AP translation postoperatively. Both preoperative skeletal kinematics and surgical techniques affected the skeletal kinematics of the replaced knee. A total component rotational mismatch angle greater than 5° significantly decreased postoperative total knee rotation during squatting.

Evaluation of anteroposterior accelerometric change after bi-cruciate stabilized total knee arthroplasty and posterior stabilized total knee arthroplasty

BackgroundIn conventional total knee arthroplasty (TKA), the anterior cruciate ligament (ACL) is resected. ACL dysfunction causes knee instability and is regarded as one factor in poor TKA outcomes. In bi-cruciate stabilized (BCS) TKA, the implant reproduces ACL function and provides anterior stability. The objective of this study was to evaluate preoperative and postoperative X-rays and accelerometer gait measurements in patients who underwent BCS TKA and posterior-stabilized (PS) TKA to assess the postoperative acceleration changes of knees after these procedures and to compare them in terms of joint range of motion (ROM) and the New Knee Society Score (New KSS). MethodsThe subjects were 60 patients, 30 of whom underwent BCS TKA and 30 PS TKA. Joint ROM, New KSS, lateral X-rays of the standing extended knee, and accelerometer data were evaluated 12 months postoperatively. ResultsThere was no significant difference in joint ROM between the groups. Both had good New KSS results, but the functional activity score was significantly higher after BCS TKA than after PS TKA. X-rays showed a lower posterior offset ratio after BCS TKA than after PS TKA, with anteroposterior positioning closer to that of the normal knee.Accelerometer data showed that postoperative anteroposterior acceleration on the femoral side in the stance phase and swing phase was lower after BCS TKA than after PS TKA. ConclusionCompared with PS TKA, BCS TKA resulted in a higher functional activity score, closer positioning to that of the normal knee on lateral X-ray, and lower anteroposterior acceleration on the femoral side.

Preoperative and intraoperative factors contributing to patient satisfaction after bi-cruciate stabilized total knee arthroplasty.

One of the causes of dissatisfaction following total knee arthroplasty (TKA) is abnormal knee kinematics. A newly designed bi-cruciate stabilized (BCS) TKA system has been developed to produce close-to-normal kinematics because of its anatomic tibiofemoral articular geometry and cam-post mechanism. Although BCS TKA is expected to improve patient satisfaction, no reports have described the appropriate technique or soft tissue handling required to achieve excellent satisfaction with BCS TKA. This study is to identify preoperative and intraoperative predictors of patient satisfaction after BCS TKA. Altogether, we studied 113 knees with primary varus knee osteoarthritis that underwent BCS TKA with a navigation system. Preoperative parameters including Knee Society Score and patient-reported scores [the Knee injury and Osteoarthritis Outcome Score (KOOS)] and intraoperative parameters including coronal, sagittal and axial alignment and joint laxity in each compartment that affected patient satisfaction was evaluated. Satisfaction score was evaluated with use of the 2011 Knee Society Scoring system. The multivariate regression analysis included age and preoperative and intraoperative parameters that correlated with satisfaction scores in the univariate analysis (P < 0.05). The mean satisfaction score was 28.2 ± 6.1. Multivariate regression analysis showed that the predictors of patient satisfaction were a preoperative high KOOS score for activities of daily living (P < 0.001), male sex (P = 0.005), older age (P = 0.027), and minimal medial joint laxity during flexion (P = 0.031). When performing BCS TKA, surgeons should pay attention to maintaining proper stability of the medial compartment, especially during flexion.

The higher patient-reported outcome measure group had smaller external rotation of the femur in bicruciate-stabilized total knee arthroplasty.

The hypothesis of this study was that the kinematics of patients with higher patient-reported outcome measures (PROMs) differ from those of patients with lower PROMs after bicruciate-stabilized total knee arthroplasty (BCS-TKA). A total of 32 patients with severe knee osteoarthritis were examined 11.2 ± 3.2months after BCS-TKA. The patients performed squats under single fluoroscopic surveillance in the sagittal plane. To estimate the spatial position and orientation of the femoral and tibial components, a 2D-to-3D registration technique was used. This technique uses a contour-based registration algorithm, single-view fluoroscopic images and 3D computer-aided design models. Knee range of motion, varus-valgus alignment, axial rotation of the femur relative to the tibial component, anteroposterior translation of the medial and lateral femorotibial contact points, kinematic paths, and anterior and posterior post-cam engagement were measured. The patients were divided into two groups using hierarchical cluster analysis based on the 1-year postoperative Knee Injury and Osteoarthritis Outcome Score and 2011 Knee Society Score. The femoral component had significantly more external rotation in the low-score group than in the high-score group (5.1 ± 1.8° vs. 2.2 ± 2.7°, p = 0.02). The high-score group had a medial pivot pattern from 0 to 20° of flexion, without significant movement from 20 to 70°, and final bicondylar rollback beyond 70°. The low-score group had a medial pivot from 0 to 70° of flexion and bicondylar rollback beyond 70°. There were no significant between-group differences in the varus-valgus angle or post-cam engagement. The higher PROM group had smaller external rotation of the femur after BCS-TKA. Level III.

Intraoperative kinematics of bicruciate-stabilized total knee arthroplasty during high-flexion motion of the knee

BackgroundIt is unknown whether intraoperative kinematics of bicruciate-stabilized total knee arthroplasty (BCS-TKA) are different for different activities. It has also not been established whether intraoperative high-flexion motions correlate with postoperative patient-reported outcome measures (PROMs). We aimed to clarify the intraoperative kinematics of BCS-TKA during high-flexion activities and describe the relationship between intraoperative and postoperative patient-reported outcomes. MethodsWe examined 33 knees from 31 patients who underwent BCS-TKA and measured intraoperative knee kinematics, passive knee flexion, and cross-legged flexion using a navigation system. We also calculated knee flexion, varus-valgus, and rotation angles. As a secondary evaluation, we divided the patients into two clusters based on the PROMs and compared the kinematics between them. ResultsThe valgus moved by 1.3 ± 1.3° beyond 90° knee flexion during passive flexion. In contrast, during cross-legged flexion, the varus moved by 4.6 ± 5.1° beyond 30° flexion. This indicated significantly increased varus alignment in the cross-legged flexion as compared with passive flexion. Beyond 60° of flexion, the femur displayed 8.8 ± 4.8° of external rotation relative to the tibia. In cross-legged flexion, the femur displayed 9.2 ± 6.5° of external rotation relative to the tibia beyond 45° of flexion. At 90° of flexion, the cross-legged knees rotated more externally. There were no significant postoperative differences between the high- and low-score clusters. ConclusionThe intraoperative knee kinematics after BCS-TKA during high-flexion motions differed depending on the performance of an individual. This will be useful for physicians who might recommend BCS-TKA to new patients.

Influence of surgical factors on patient satisfaction after bi\u2010cruciate stabilized total knee arthroplasty: retrospective examination using multiple regression analysis

BackgroundOne of the causes of dissatisfaction following total knee arthroplasty (TKA) is abnormal knee kinematics. A newly designed bi-cruciate stabilized (BCS) TKA system has been developed to produce close-to-normal kinematics because of its anatomic tibiofemoral articular geometry and cam-post mechanism. Although BCS TKA is expected to improve patient satisfaction, no reports have described the appropriate technique or soft tissue handling required to achieve excellent satisfaction with BCS TKA. This study is to identify intraoperative surgical predictors of patient satisfaction after BCS TKA.MethodsWe studied 104 knees with primary varus knee osteoarthritis that underwent BCS TKA with a navigation system retrospectively. Surgical parameters including coronal, sagittal and axial alignment and joint laxity in each compartment that affected patient satisfaction was evaluated. Satisfaction score was evaluated with use of the 2011 Knee Society Scoring system. The multivariate regression analysis included age, gender, body mass index and intraoperative parameters that correlated with satisfaction scores in the univariate analysis (P < 0.05). The current study focused on the patient satisfaction score at 1 year postoperatively and didn’t evaluate the long term clinical results nor survivorship.ResultsThe postoperative satisfaction score was 28.6 ± 8.1. Multivariate analysis showed that medial joint laxity at 30° flexion (P = 0.003), tibial excessive external rotation alignment (P = 0,009) and tibial varus alignment (P = 0.029) were predictors of poor satisfaction score.ConclusionsWhen performing BCS TKA, surgeons should pay attention to maintaining proper stability of the medial compartment at mid flexion range and should avoid tibial varus and excessive external rotational alignment.

The Association between In Vivo Knee Kinematics and Patient-Reported Outcomes during Squatting in Bicruciate-Stabilized Total Knee Arthroplasty

Bicruciate-stabilized total knee arthroplasty (BCS TKA) has been developed to improve TKA kinematic performance. However, the relationship between in vivo kinematics and patient-reported outcomes (PROs) has not been well described. This study was performed to clarify the relationship between in vivo kinematics and PROs in a cohort of patients undergoing BCS TKA. Forty knees were evaluated using a two-dimensional to three-dimensional registration technique obtained from sagittal plane fluoroscopy. In vivo kinematics including anteroposterior (AP) translation and tibiofemoral rotation were evaluated. Knee Society scores (KSSs) and Knee injury and Osteoarthritis Outcome Scores (KOOSs) were assessed before and after surgery. Relationships between tibiofemoral kinematics assessed with the knee in different positions of knee flexion and PROs were evaluated using Spearman's correlation analysis. The study demonstrated a significant negative correlation (r = - 0.33) between medial AP translation from minimum flexion to 30 degrees flexion and postoperative KOOS activities of daily living subscale. A significant positive correlation (r = 0.51) was found between the femoral external rotation from minimum flexion to 30 degrees flexion and improvement of the KOOS pain subscale. No correlation was found between the lateral AP translation and PROs. Achieving medial AP and femoral external rotation stability in early flexion may be important in optimizing postoperative PROs.

Posterior tibial slope and anterior post-cam contact can change knee kinematics in extension in bi-cruciate stabilized total knee arthroplasty.

AimsThis study aims to investigate the effects of posterior tibial slope (PTS) on knee kinematics involved in the post-cam mechanism in bi-cruciate stabilized (BCS) total knee arthroplasty (TKA) using computer simulation.MethodsIn total, 11 different PTS (0° to 10°) values were simulated to evaluate the effect of PTS on anterior post-cam contact conditions and knee kinematics in BCS TKA during weight-bearing stair climbing (from 86° to 6° of knee flexion). Knee kinematics were expressed as the lowest points of the medial and lateral femoral condyles on the surface of the tibial insert, and the anteroposterior translation of the femoral component relative to the tibial insert.ResultsAnterior post-cam contact in BCS TKA was observed with the knee near full extension if PTS was 6° or more. BCS TKA showed a bicondylar roll forward movement from 86° to mid-flexion, and two different patterns from mid-flexion to knee extension: screw home movement without anterior post-cam contact and bicondylar roll forward movement after anterior post-cam contact. Knee kinematics in the simulation showed similar trends to the clinical in vivo data and were almost within the range of inter-specimen variability.ConclusionPostoperative knee kinematics in BCS TKA differed according to PTS and anterior post-cam contact; in particular, anterior post-cam contact changed knee kinematics, which may affect the patient’s perception of the knee during activities.Cite this article: Bone Joint Res 2020;9(11):761–767.

Comparison of intraoperative kinematics and their influence on the clinical outcomes between posterior stabilized total knee arthroplasty and bi-cruciate stabilized total knee arthroplasty

BackgroundOf all the intraoperative kinematic parameters recorded using navigation systems, femorotibial rotational alignment is reportedly associated with the clinical outcomes of cruciate retaining and posterior stabilized (PS) total knee arthroplasty (TKA). However, to our knowledge, there are no reports on the relationship of newly designed bi-cruciate stabilized (BCS) TKA and intraoperative rotational kinematics. We aimed to clarify and compare the relationships between the intraoperative kinematics and clinical outcomes of BCS TKA and PS TKA. MethodsWe compared the intraoperative rotational kinematics and clinical outcomes at two years postoperatively of 56 BCS TKA patients and 55 PS TKA patients. Further, we evaluated the relationship between the femorotibial rotational kinematics and clinical outcomes. ResultsThe maximum flexion angle and the pain subscale of the Knee injury and Osteoarthritis Outcome Score (KOOS) in BCS TKA were significantly better than those in PS TKA. The intraoperative kinematic data of BCS TKA showed “screw-home” movement, while that of PS TKA did not show this movement. The rotational angular differences between at maximum flexion angle and at 60° flexion of BCS TKA showed positive correlations with the improvement of KOOS pain, symptom, activity of daily living and sports subscales. The rotational angular differences between at maximum flexion angle and at 30° flexion in PS TKA showed positive correlations with the maximum flexion angle. ConclusionIntraoperative femorotibial rotational kinematics and its influence on the clinical outcomes were different between BCS and PS TKA. BCS TKA showed more normal-like kinematics and better clinical results than PS TKA.

Kinematics of bicruciate and posterior stabilized total knee arthroplasty during deep knee flexion and stair climbing.

Second-generation bicruciate stabilized (BCS) total knee arthroplasty (TKA) was developed to substitute both anterior and posterior cruciate ligaments and replicate physiological kinematics. This study aimed to evaluate if the postcam mechanism and the surface geometry function effectively. Seventeen and twelve knees implanted with BCS TKA and posterior stabilized (PS) TKA, respectively, were analyzed. In vivo kinematics during deep knee flexion were estimated from single-plane fluoroscopic images using a 2-dimensional to 3-dimensional image registration technique. Flexion angle, anteroposterior translation, femoral external rotation (ER), and postcam engagement were compared between the groups. Postoperative 2011 Knee Society Score (KSS) was obtained at the last follow-up. The medial femoral condyle in BCS was positioned more anteriorly than that in PS from minimum flexion to maximum flexion. Posterior motion of the lateral femoral condyle was observed in both groups. ER of BCS was significantly larger compared to PS from minimum flexion to 100°. However, the amount of ER from minimum flexion to maximum flexion was similar: 6.2° ± 4.5° and 7.7° ± 4.1° in BCS and PS, respectively (P = .364). Anterior postcam engagement was observed in 76.5% and 25.0% in BCS and PS, respectively (P = .006). Posterior postcam engagement was observed in all cases in BCS and PS. There were no significant differences in KSS between the groups. The kinematic differences were likely a result of variations in articular surface geometry.

The influence of tibiofemoral joint forces on patient-reported outcome measurements after bicruciate stabilized total knee arthroplasty.

Insall advocated that a successful clinical outcome of total knee arthroplasty (TKA) depends on soft tissue balance procedure. Spacer blocks, balancer, and instrumented tibial sensor (VERESENSE, OrthoSensor, Dania, Florida, USA) are the current methods of soft tissue balancing during TKA. The purpose of the study is to assess intraoperative medial and lateral tibiofemoral compressive force (TFCF) using novel insert sensor and investigate the relationship between TFCF and patient-reported outcome measurements (PROMs). Twenty-five patients who underwent bicruciate stabilized (BCS) TKA were evaluated retrospectively. We measured intraoperative medial and lateral TFCF in neutral position as well as the force ratio (FR %:medial TFCF/medial + lateral TFCF) in varus and valgus position using the novel insert sensor throughout the range of motion (ROM) and assessed the relationship between intraoperative medial and lateral TFCF and PROM at 6 months after TKA. Medial TFCF increased and lateral TFCF decreased throughout ROM. The mean FR was 0.44% ± 0.22 throughout ROM. Medial and lateral TFCF differences at 60° of ROM in neutral position showed a positive correlation with physical function in Western Ontario and McMaster Universities scores (r = 0.60, p < 0.05). Medial and lateral TFCF differences at 30° and 140° of ROM in valgus stress test showed a positive correlation with symptoms in 2011 Knee Society Scores (r = 0.49, p < 0.05; r = 0.51, p < 0.05). The present study revealed that BCS TKA reproduces the coronal laxity, which is similar to healthy knee. These results suggest that intraoperative medial stability is important for function and symptoms, therefore, surgeons should not release medial soft tissue for achieving better clinical outcomes after BCS TKA. II.

The relationship between anteroposterior stability and medial–lateral stability of the bi-cruciate stabilized total knee arthroplasty

BackgroundAcquisition of appropriate anteroposterior (AP) stability depends on the prosthetic design and intraoperative soft tissue handling. A bi-cruciate stabilized (BCS) total knee arthroplasty (TKA) has a two cam-post mechanism, which substitutes for the anterior cruciate ligament and posterior cruciate ligament (PCL). Therefore, appropriate AP stability is expected. Because the PCL is sacrificed during BCS TKA, medial stability and lateral stability are thought to be important factors to determine AP stability. However, no previous study has reported AP stability after BCS TKA and the relationship between AP and medial–lateral stability. MethodsAP stability was measured using a navigation system intraoperatively and the KT 2000 device postoperatively. Intraoperative joint laxity of the medial and lateral compartments was evaluated separately using a compartment-specific ligament tensioner. The relationship between AP stability and medial–lateral laxity was assessed. ResultsIntraoperative AP translation at 30° and 90° knee flexion angles was 7.7 ± 3.1 mm and 5.9 ± 2.0 mm, respectively. Postoperative AP translation at 30° was 5.9 ± 1.7 mm. AP translation correlated positively with medial joint laxity at 30° (R = 0.29) and 90° (R = 0.40). The intraoperative and postoperative AP translations at 30° flexion had a positive relationship (R = 0.61). ConclusionAP stability of the BCS TKA had a positive relationship with intraoperative medial stability. Therefore, surgical soft tissue handling focusing on medial stability is also appropriate for AP stability of BCS TKA. Additionally, intraoperative AP translation turned out to be a predictive indicator for postoperative knee AP stability at 30° flexion.