Benzyl Group Research Articles

Mild method for the synthesis of α-glycosyl chlorides: A convenient protocol for quick one-pot glycosylation

A simple and efficient protocol for the preparation of α-glycosyl chlorides within 15–30 min is described which employs a stable, cheap, and commercially available Trichloroisocyanuric acid (TCCA) as non-toxic chlorinating agent along with PPh3. This process involved a wide range of substrate scope and is well-suited with labile hydroxyl protecting groups such as benzyl, acetyl, benzoyl, isopropylidene, benzylidene, and TBDPS (tert-butyldiphenylsilyl) groups. This process is operationally simple, mild conditions and obtained good yields with excellent α selectivity. Moreover, a multi-catalyst one-pot glycosylation can be carried out to transform the glycosyl hemiacetals directly to a various O-glycosides in high overall yields without the need for separation or purification of the α-glycosyl chloride donors.

Organic synthesis of 1,2-dipalmitoyl-rac-glycero-3-phosphatidylethanolamine and its effect on the induction of apoptosis in normal human lung fibroblasts

Background /objectiveThe phospholipid 1,2-dipalmitoyl-rac-glycero-3-phosphatidylethanolamine (PE) comprises two fatty acid chains: glycerol, phosphate, and ethanolamine. PE participates in critical cellular processes such as apoptosis and autophagy, which places it as a target for designing new therapeutic alternatives in diseases such as pulmonary fibrosis. Therefore, this study aimed obtain PE through a six-step organic synthesis pathway and determine its biological effect on apoptosis induction in normal human lung fibroblasts (NHLF). MethodologyThe first step of the organic synthesis route began with protected glycerol that was benzylated at sn-3; later, it was deprotected to react with palmitic acid at sn-1, sn-2. To remove the benzyl group, hydrogenation was performed with palladium on carbon (Pd/C); subsequently, the molecule was phosphorylated in sn-3 with phosphorus oxychloride and triethylamine, and the intermediate was hydrolyzed in an acid medium to obtain the final compound. After PE synthesis, apoptosis assessment was performed: apoptosis was induced using exposure to annexin V-FITC/propidium iodide-ECD (PI) and quantified using flow cytometry. The experiments were performed in three NHLF cell lines with different concentrations of PE 10, 100 and 1000 µg/mL for 24 and 48 h. ResultsThe PE obtained by organic synthesis presented a melting point of 190–192 °C, a purity of 95%, and a global yield of 8%. The evaluation of apoptosis with flow cytometry showed that at 24 h, exposure to PE 10, 100, and 1000 µg/mL induces early apoptosis in 19.42%− 25.54%, while late apoptosis was only significant P < 0.05 in cells challenged with 100 µg/mL PE. At 48 h, NHLF exposed to PE 10, 100, and 1000 µg/mL showed decreasing early apoptosis: 28.69–32.16%, 12.59–18.84%, and 10.91–12.61%, respectively. The rest of the NHLF exposed to PE showed late apoptosis: 12.03–16–42%, 11.04–15.94%, and 49.23–51.28%. Statistical analysis showed a significance P < 0.05 compared to the control. ConclusionThe organic synthesis route of PE allows obtaining rac-1,2-O-Dipalmitoyl-glycero-3-phosphoethanolamine (1), which showed an apoptotic effect on NHLF.

Thiophene-conjugated benzothiazole derivatives as versatile skeletons for staining subcellular organelles in living cells

A series of hydroxy thiophene-conjugated benzothiazole derivatives (HTBs) was prepared to investigate their fluorescence emission behaviors and capability to selectively stain subcellular organelles for fluorescence imaging. The HTB derivatives exhibited excited-state intramolecular proton transfer (ESIPT) and intramolecular charge transfer (ICT) behaviors, according to their molecular structure. Subtle changes in the molecular structure of the HTB influenced its response to changes in the surrounding environment, such as the solvent polarity and/or pH. In vitro cellular imaging experiments revealed that HTBA (5-(benzo[d]thiazol-2-yl)-[2,2′-bithiophen]-4-ol) could selectively stain mitochondria. In contrast, HTBB-CO2Et (ethyl 5'-(benzo[d]thiazol-2-yl)-3′-hydroxy-[2,2′-bithiophene]-5-carboxylate), which contains a regioisomeric hydroxy thiophene unit with an electron-withdrawing ethyl ester group, showed the capability to stain lipid droplets (LDs) in living cells. When the hydroxyl group in HTBB-CO2Et was protected with a benzyl group, effective staining of LDs in live cells was achieved. Thus, we successfully obtained an effective fluorescent probe. Collectively, the results indicated that small structural changes resulted in substantial changes in the intracellular localization and in vitro imaging ability of the prepared compounds.

Synthesis, acaricidal activity, and structure-activity relationships of novel phenyl trifluoroethyl thioether derivatives containing substituted benzyl groups.

To discover and develop novel acaricidal compounds, a series of 2-fluoro-4-methyl/chlorine-5-((2,2,2-trifluoroethyl)thio)aniline/phenol compounds containing N/O-benzyl moieties were synthesized based on lead compound LZ-1. The activity of these compounds against carmine spider mites (Tetranychus cinnabarinus) was determined using the leaf-spray method. Bioassays indicated that most of the designed target compounds possessed moderate to excellent acaricidal activity against adult T. cinnabarinus. The median lethal concentrations of 25b and 26b were 0.683 and 2.448 mg L-1 against adult mites, respectively; exceeding those of bifenazate (7.519 mg L-1 ) and lead compound LZ-1(3.658 mg L-1 ). Compound 25b exhibited 100% mortality in T. cinnabarinus larvae at 10 mg L-1 . Continuing the study of these compounds in field trials, we compared the efficacy of mite killing by compound 25b with the commercial pesticide spirodiclofen and showed that mite control achieved 95.9% and 83.0% lethality at 10 and 22 days post-treatment. In comparison, spirodiclofen showed 92.7% lethality at 10 days and 77.2% lethality at 22 days post-treatment at a concentration of 100 mg L-1 . Results showed that 25b produced more facile and long-lasting control against T. cinnabarinus than the commercial acaricide spirodiclofen. Density functional theory analysis and electrostatic potential calculations of various molecular substitutions suggested some useful models to achieve other highly active miticidal compounds. © 2023 Society of Chemical Industry.

Pralidoxime-like reactivator with increased lipophilicity - Molecular modeling and in vitro study

Acetylcholinesterase (AChE, EC 3.1.1.7) reactivators (2-PAM, trimedoxime, obidoxime, asoxime) have become an integral part of antidotal treatment in cases of nerve agent and organophosphorus (OP) pesticide poisonings. They are often referred to as specific antidotes due to their ability to restore AChE function when it has been covalently inhibited by an OP compound. Currently available commercial reactivators exhibit limited ability to penetrate the blood-brain barrier, where reactivation of inhibited AChE is crucial. Consequently, there have been numerous efforts to discover more brain-penetrating AChE reactivators. In this study, we examined a derivative of 2-PAM designed to possess increased lipophilicity. This enhanced lipophilicity was achieved through the incorporation of a benzyl group into its molecular structure. Initially, a molecular modeling study was conducted, followed by a comparison of its reactivation efficacy with that of 2-PAM against 10 different AChE inhibitors in vitro. Unfortunately, this relatively significant structural modification of 2-PAM resulted in a decrease in its reactivation potency. Consequently, this derivative cannot be considered as a broad-spectrum AChE reactivator.

Target immobilization on glass microfiber membranes as a label-free strategy for hit identification.

The discovery of novel chemical entities targeting G protein-coupled receptors (GPCRs) is usually guided by their receptor affinity. However, traditional affinity assay methods and hit identification procedures are usually laborious and expensive. In this work, the type-2 vasopressin receptor (V2R) was chosen as a prototypical GPCR. Membrane fragments from cells highly expressing SNAP-V2R were immobilized on the surface of a glass microfiber (GMF) coated with O6-benzylguanine (BG). This was achieved by transferring the benzyl group of BG to the active site of the SNAP-tag through a nucleophilic substitution reaction. As a result, a biofilm called SNAP-V2R@GMF-BG was produced that showed good specificity and stability. The adsorption ratio for each V2R ligand treated with SNAP-V2R@GMF-BG was determined by HPLC and exhibited a good linear correlation with the Ki value determined by displacement assays. Furthermore, a Ki prediction assay was performed by comparing the data with that generated by a homogeneous time-resolved fluorescence (HTRF) assay. SNAP-V2R@GMF-BG was also used to screen hit compounds from natural products. After SNAP-V2R@GMF-BG was incubated with the total extract, the ligand that binds to V2R could be separated and subjected to LC‒MS analysis for identification. Baicalein was screened from Clerodendranthus spicatus and verified as a potential V2R antagonist. This V2R-immobilized GMF platform can help determine the affinity of V2R-binding hit compounds and screen the compounds efficiently and accurately.

Operando FTIR-ATR with molecular dynamic simulations to understand the diffusion mechanism of waste tire-derived pyrolytic oil for asphalt self-healing

Recent research proves that pyrolytic oils from waste tires are effective in restoring the chemical and rheological properties of aged asphalt binders. Nonetheless, the role of oil-binder molecular interactions and bindeŕs aging degree on the diffusional behavior of the pyro-oils is still unclear. In this study, authors propose integrating operando Fourier Transformed Infrared Spectroscopy (FTIR) measurements with molecular dynamics (MD) simulations as a novel approach to unravel the diffusion mechanisms of pyro-oils in asphalt binders with self-healing purposes. The produced pyro-oils contains aliphatic and single-ring alkyl aromatic compounds as the most abundant species (ca. 80%). The operando FTIR measurements were correlated by a Fickian model, resulting in diffusion coefficients (D0) between 10-12 and 10-11 m2s−1. Moreover, MD simulations, with a molecular model of aged asphalt containing benzylic rings, sulfoxides, and hydroxyl functional groups, demonstrated that interactions of functional groups in the pyro-oil with the binder, hinder the diffusion behavior of the pyro-oil. The D0 estimated from the MD simulations agreed with those calculated from experimental data and previous reports for petro- and bio-derived rejuvenators. The predictive performance of the MD simulations developed in this study confirms to design of more resilient self-healing asphalt binders using a bottom-up strategy.

Expanding the Structural Diversity at the Phenylene Core of Ligands for the von Hippel-Lindau E3 Ubiquitin Ligase: Development of Highly Potent Hypoxia-Inducible Factor-1α Stabilizers.

Hypoxia-inducible factor-1α (HIF-1α) constitutes the principal mediator of cellular adaptation to hypoxia in humans. The HIF-1α protein level and activity are tightly regulated by the ubiquitin E3 ligase von Hippel-Lindau (VHL). Here, we performed a structure-guided and bioactivity-driven design of new VHL inhibitors. Our iterative and combinatorial strategy focused on chemical variability at the phenylene unit and encompassed further points of diversity. The exploitation of tailored phenylene fragments and the stereoselective installation of the benzylic methyl group provided potent VHL ligands. Three high-resolution structures of VHL-ligand complexes were determined, and bioactive conformations of these ligands were explored. The most potent inhibitor (30) exhibited dissociation constants lower than 40 nM, independently determined by fluorescence polarization and surface plasmon resonance and an enhanced cellular potency, as evidenced by its superior ability to induce HIF-1α transcriptional activity. Our work is anticipated to inspire future efforts toward HIF-1α stabilizers and new ligands for proteolysis-targeting chimera (PROTAC) degraders.

Effect of allyl, benzyl, and hydroxyl groups on the CO2 absorption capacity of propanenitrile imidazolium–based ionic liquids incorporating dioctylsulfosuccinate anion

Effect of allyl, benzyl, and hydroxyl groups on the CO2 absorption capacity of propanenitrile imidazolium–based ionic liquids incorporating dioctylsulfosuccinate anion

Cu(I)–N-heterocyclic carbene complexes bearing a naphthyl substituent: synthesis, characterization, and antimicrobial activities

A series of 1-(alkyl)-3-(1-naphthyl)imidazolinium bromides (2a–d) as N-heterocyclic carbene (NHC) precursors were synthesized from 3-(1-naphthyl)-1H-imidazolinium chloride (1). By reacting these NHC precursors with fresh CuCl, Cu(I)–NHC complexes (3a–d) were synthesized. The structures of the compounds were elucidated using 1H, 13C-NMR, FT-IR, ESI-MS, X-ray diffraction, scanning electron microscopy with energy-dispersive X-ray spectroscopy analysis, and elemental analysis techniques. The thermal properties of selected complexes were determined. Salts (1, 2a–d) and Cu(I)–NHC complexes (3a–d) were investigated against test microorganisms to determine their antimicrobial potency. The imidazolinium salts 2b and 2d displayed remarkable antibacterial efficacy, particularly against gram-positive bacteria; however, the corresponding Cu(I)–NHC derivatives (3a–d) did not exhibit a similar level of potency probably due to limited solubility. Overall, it can be concluded that incorporation of N-substituent species with O-heteroatoms, instead of benzyl, allyl, or hexyl groups on NHC, can enhance the activity against microbial derivatives.

Reactivity of Open-Shell Metallofullerene Anions: Synthesis, Crystal Structures, and Electrochemical Properties of Benzylated Gd@C2v-C82

The reactivity of the open-shell Gd@C2v-C82 with different charge states towards benzyl bromide was investigated. [Gd@C2v-C82]3− exhibited enhanced activity relative to Gd@C2v-C82 and [Gd@C2v-C82]−. The structural characterizations, including MALDI-TOF MS, UV-vis-NIR, and single crystal X-ray diffraction, indicate the formation of isomeric benzyl monoadducts of Gd@C2v-C82. All three monoadducts contain 1:1 mirror-symmetric enantiomers. Additionally, the addition of the benzyl group and its specific position result in distinct electrochemical behavior of the products compared to the parent Gd@C2v-C82. Theoretical studies demonstrate that only [Gd@C2v-C82]3− has a HOMO energy level that matches well with the LUMO energy level of the PhCH2 radical, providing a rationalization for the observed significantly different reactivity.

Oxidative Deprotection of Benzyl Protecting Groups for Alcohols by an Electronically Tuned Nitroxyl-Radical Catalyst.

The oxidative deprotection of benzyl (Bn) groups using nitroxyl-radical catalyst 1 and co-oxidant phenyl iodonium bis(trifluoroacetate) (PIFA) is reported. This catalyst is highly active for the oxidation of benzylic ethers because of the electronic tuning on account of the electron-withdrawing ester groups next to the catalytically active center. This catalytic system promotes deprotections at ambient temperature and has a broad substrate scope, including substrates possessing hydrogenation-sensitive functional groups, while the deprotection hardly proceeds when using well-known nitroxyl-radical catalysts such as 2,2,6,6-tetramethylpiperidine N-oxyl (TEMPO). The 1/PIFA system also promotes the deprotection of several benzylic protecting groups, including 2-naphthylmethyl (NAP) and 4-methylbenzyl (MBn) groups. Catalyst 1 was also effective for the direct synthesis of ketones and aldehydes from Bn ethers via deprotected alcohols using an excess of the co-oxidant PIFA.

Computational Quantum Chemical Study, Insilco Molecular Docking and ADMET Study of (3E,5E)-3,5-Bis((1H-Indol-3-yl)Methylene)-1-Benzylpiperidin-4-One Derivatives

The title compound (3E,5E)-3,5-bis((1H-indol-3-yl)methylene)-1-benzylpiperidin-4-one (BIMBP) was deliberated optimal structure, data were calculated using the density functional theory (DFT) B3LYP method on 6-31 G (d, p) basis set and the experimental bond length and bond angles are compared with experimental data. The six-member piperidin-4-one ring adopts a chair conformation with the benzyl group occupying an equatorial position and the olefinic double bonds possessing an E configuration by DFT method. The stability and charge delocalization of the molecule were also studied by natural bond orbital (NBO) analysis. The calculated energies for the Highest Occupied Molecular Orbital (HOMO) and the Lowest Unoccupied Molecular Orbital (LUMO) showed the stability and reactivity of the title compound. The molecular electrostatic potential (MEP) picture was drawn using the same level of theory to visualize the chemical reactivity and charge distribution on the molecule. The reported BIMBP molecule used as a potential NLO material since it has high μβ0 value. Molecular docking study performed for the synthesized compound revealed an efficient interaction with the antibacterial protease and resulted in good activities. Virtual ADMET studies were carried out as well and a relationship between biological, electronic, and physicochemical qualifications of the target compound was determined. Toxicity prediction by computational technique for the title compound was also carried out.

Structure–Function Relationship within Cu-Peptoid Electrocatalysts for Water Oxidation

Water oxidation (WO) is the first step in the water-splitting process aiming at the production of hydrogen as a green renewable fuel. To successfully perform WO, potent strategies for overcoming the high energetic barrier and slow kinetics of this reaction are urgently required. One such strategy is the use of molecular catalysis. Specifically, Cu-based catalysts have been highlighted over the last decade due to their stability and fast kinetics. Among them, Cu-peptoids, where peptoids are peptidomimetics akin to peptides and are N-substituted glycine oligomers, can act as stable and active catalysts for oxidation transformations including electrocatalytic WO. Previously, we suggested that a benzyl group incorporated as a side chain near the catalytic site within a Cu-peptoid electrocatalyst for WO has a structural role in the activity of the electrocatalyst in phosphate buffer (PBS). Herein, we aimed to test this hypothesis and understand how an incorporated structural element side chain affects WO. To this aim, we prepared a set of peptoid trimers each with a different structural element replacing the benzyl group by either naphthyl, cyclohexyl, benzyl, propyl chloride, or propyl side chains as well as a peptoid lacking a structural element. We studied the structure of their Cu complexes and tested these complexes as electrocatalysts for WO. We discovered that while all the peptoids self-assemble to form dinuclear Cu-peptoid complexes, the duplex that has no structural side chain, Cu2(BE)2, is structurally different from the others in the solid state. Moreover, Cu2(BE)2 remains dinuclear in a PBS at pH 11, while all the other duplexes are mononuclear in the PBS. Finally, though most of the complexes showed low electrocatalytic activity for WO, the dinuclear complex Cu2(BE)2 performed with the highest turnover frequency of 484 s−1. Nevertheless, this dinuclear complex slowly decomposes to the corresponding mononuclear complex as a more stable species during WO, while the other mononuclear complexes retain their structure in solution but display much slower kinetics (ca. 5 to 8 s−1) under the same conditions. Overall, our results demonstrate that bulkier side chains hamper the stability of dinuclear Cu-peptoids in a PBS, and hence, their efficiency as WO electrocatalysts is also hampered.

Single-site modification of the P450-BM3 substrate-entrance facilitates the synthesis of optically pure pharmaceutically useful methyl trans-3-phenylglycidates

Optically pure methyl trans-3-phenylglycidates are useful chiral blocks or intermediates in the pharmaceutic field. However, high efficiency and enantioselective synthetic methods remain to be developed. We report an enzymatic process, based on rationally modifying the site D68 at the entrance of the P450-BM3 monooxygenase, thereby creating a mutant D68V with high epoxidation activity and high stereoselectivity toward methyl cinnamate as a cheap substrate. About 9-fold increase in turnover number compared to the wild type was achieved. Furthermore, with molecular dynamics simulations, the reasons for increased activity and stereoselectivity were unveiled. The best mutant also presents high activity toward methyl cinnamate analogs with fluorinated benzyl group. All epoxy products were produced on a gram-scale by whole-cells catalysis. In addition, a series of (+)-prebalamide derivatives were chemically synthesized from these products. This work not only expands the biocatalytic toolbox for producing methyl trans-3-phenylglycidates, but also identifies a new hotspot for engineering P450-BM3.

Ampyrone appended 1,2,3-triazole as selective fluorescent Cu(II) ion sensor: DFT and docking findings

The present report describes the application of the ‘Click Chemistry’ pathway to synthesize a fluorescent probe (APT) based on ampyrone (4-aminoantipyrine), entailing two benzyl groups as the fluorophores coupled to the antipyrine structure through 1,2,3-triazole moieties. Infrared spectroscopy (IR), nuclear magnetic resonance (1H and 13C), and mass spectrometry were the standard spectroscopic methods used to characterize APT. The ion recognition potential of the probe was analyzed through absorption and emission spectroscopy employing a 4:1 combination of CH3CN and H2O, which demonstrated APT to be an efficient sensing agent for Cu(II) ions, wherein the absorption spectrum of the probe displayed a hypsochromic shift with a hyperchromic shift on gradually adding the metal ion solution of Cu(II), whereas quenching of the probe's fluorescence emission on Cu(II) addition was attributed to the chelation-enhanced fluorescence quenching (CHEQ), induced by the d9 electronic configuration of Cu(II). The stoichiometry of the complexation of APT with Cu(II) is indicative of a 1:1 ratio, while the detection limit (LOD) and quantification limit (LOQ) as estimated from the fluorescence titration results were 3.11 µM and 10.35 µM respectively. Furthermore, DFT analysis was also undertaken to yield the energy-optimized structures and HOMO-LUMO density plots of APT and its corresponding Cu(II) complex via the B3LYP/631G+(d,p) level of theory for APT, and LANL2DZ basis set for the APT-Cu(II) complex. Docking analysis of the probe with the synaptic vesicle protein (SV2A) gave glimpses about its anticonvulsant properties.

Environmentally Benign Water-Soluble Sodium L-2-(1-Imidazolyl) Alkanoic Acids as New Corrosion Inhibitors for Mild Steel in Artificial Seawater.

Three novel natural amino acid-derived sodium L-2-(1-imidazolyl) alkanoic acids (IZSs), namely, sodium 2-(1H-imidazol-1-yl)-4-methylpentanoate (IZS-L), sodium 2-(1H-imidazol-1-yl)-3-phenylpropanoate (IZS-P), and sodium 2-(1H-imidazol-1-yl)-4-(methylthio)butanoate (IZS-M), were investigated as corrosion inhibitors. The IZSs were synthesized following the green chemistry principles, and their structure was characterized using FTIR and NMR techniques. The corrosion study results reveal that a moderate concentration of IZSs (having low solution conductivity) showed potential corrosion inhibition for mild steel in artificial seawater. At longer immersion, IZS-P forms a uniform protective film and exhibits the potential inhibition efficiency of 82.46% at 8.4 mmol L-1. Tafel polarization results reveal that IZS-P and IZS-M act as mixed types with an anodic predominantly corrosion inhibitor. The electrochemical impedance spectroscopy results signify that IZSs inhibit mild steel corrosion through the formation of an inhibitor film on the metal surface, which was further confirmed by the FTIR, SEM, EDX, and XPS studies. DFT result shows that in IZS-P, the benzylic group (-CH2-Ph) has greater electron distribution compared to isobutyl (-CH2CH(CH3)2) in IZS-L and methythioethyl group (-CH2CH2SCH3) which supported the corrosion inhibition performance at longer immersion [IZS-P (82.46%) > IZS-M (67.19%) > IZS-L (24.77%)].

Synthesis, Biological Evaluation, and Docking Studies of Open-Chain Carbohydrate Amides as Acetylcholinesterase Inhibitors.

Alzheimer's disease is a multifactorial syndrome, which is not yet fully understood, causing memory loss, dementia, and, ultimately, death. Acetylcholinesterase inhibitors are the mainstay drugs that are used in disease-symptomatic treatment. In this work, we report a new synthetic route yielding sugar amides as low to moderate acetylcholinesterase inhibitors. Commercially available diacetone glucose was converted into perbenzyl D-glucono-1,4- lactone, which reacted with aromatic or aliphatic amines to afford the corresponding new amides in a high isolated yield. Docking studies of the most promising hydroxybutylamide and benzylamide were performed to assign binding interactions with acetylcholinesterase and determine the key features for bioactivity. The inhibitors are accommodated in enzyme gorge, blocking the access to Ser203 mainly due to π-π stacking interactions of sugar benzyl groups with the aromatic gorge residues, Tyr337 and Tyr341 for both inhibitors and Trp439 only for the hydroxybutylamide. Bonding is also significant through sugar interaction with the residues Tyr124 and Ser125-OH in both inhibitors. Flexibility of these open-chain structures seems to be quite relevant for the observed binding to acetylcholinesterase.

TiO2/SO42- Solid Superacid: A Rapid, Solventless, Recoverable Nanocatalyst for Eco-Friendly Synthesis of Piperidin-4-one Oximes

: A potent, eco-friendly approach for converting 2,6-arylpiperidin-4-ones into their corresponding oximes in the presence of hydroxylamine hydrochloride and catalysed by nanosize sulfated titania (TiO2/SO4 2-) solid superacid was developed. Sol-gel method was employed to synthesize the catalyst and confirmed standard characterization techniques viz., by FT-IR, XRD, TEM, SEM, and EDS analysis. After adding 0.05 g of catalyst, the reaction was carried out under stirring in an oil bath at 130oC for 3-7 min under solvent-free conditions. This approach has advantages like catalyst recyclability, high yields, shorter reaction time, and simple work-up. Additionally, the catalyst TiO2/SO4 2- exhibited good stability, recoverability, and reusability for five consecutive runs without tremendous loss in its catalytic activity. The compounds 3a-o were characterised by IR, 1H and 13C NMR spectral analysis. The coupling constant values in NMR results suggested that the compounds 3a-o exhibit chair conformation with equatorial orientations with all the substituents. This is in agreement with the X-ray crystallography of 3c, confirming that the chair conformation of =N-OH group is syn to C-5 and anti to benzyl group at C-3 and hence if forms more stable (E)-configuration of the oxime 3c.

Chemoselective Catalytic Dehydrogenation of Benzylic Amines Driven by the TEtraQuinoline/FeCl2 Complex

AbstractA chemoselective dehydrogenation protocol for benzylic amines catalyzed by the TEtraQuinoline (TEQ)/FeCl2 complex is described. In combination with 2 equiv of tert‐butyl hydroperoxide, as little as 0.1 mol% of catalyst loading was sufficient to convert primary and secondary benzylic amines to the corresponding imines and dimerized imines, respectively. Subsequent hydrolysis of the imines allowed for removal of the benzyl group on the nitrogen atom. Nonaromatic carbon‐carbon multiple bonds and the O‐Bn group remained intact in the present protocol, providing a complementary deprotection procedure to reductive removal conditions exerted by Pd catalysis.