A novel crosslinker for thermally reversible covalent (TRC) linking of halide-containing polymers is suggested. Chlorine-containing polymers such as chloromethylstyrene copolymers, chlorinated polypropylene, polyvinylchloride, chlorinated polyisoprene, and polyepichlorohydrin were crosslinked with potassium dicyclopentadienedicarboxylate (KDCPDCA). The crosslinker was prepared by reacting potassium ethoxide with dicyclopentadienedicarboxylic acid. Because of the low solubility of KDCPDCA in organic solvents, a phase transfer catalyst, benzyltrimethyl-ammonium bromide, was employed for the crosslinking reaction. The crosslinking reaction occurred at a higher rate in a polar solvent, such as dimethylformamide, than in a nonpolar one, such as toluene, and was affected by the nature of the chlorine-containing polymer. Some of the polymers crosslinked even at room temperature. The chain-extending reaction between KDCPDCA and a α,ω-dihalide compound such as α,α′-dichloro-p-xylene, 1,4-dichlorobutane, or 1,4-dibromobutane also was carried out to obtain linear oligomers. The IR spectra indicated that the crosslinking and chain-extending reactions were based on the esterification between the halidecarbon bonds of the polymer and the COOK groups of KDCPDCA. The flowability at 195 °C and solubility on heating in a dichlorobenzen-maleic compound mixture of the crosslinked polymers indicated that the TRC crosslinking occurred via the reversible Diels–Alder cyclopentadiene/dicyclopentadiene conversion as long as the polymer was thermally stable and did not contain olefinic CC bonds. The TRC linking also was confirmed by the rapid decrease of the specific viscosity of the obtained linear oligomers on heating. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4390–4401, 1999