Benzene-1,3,5-tricarboxamide Research Articles

Guest induced morphology transitions of star shaped pillar[5]arene trimer via endo host-guest and “exo-wall” electron-transfer interactions

Star shape bridged pillar[5]arene trimer (C3-PLT) based on benzene-1,3,5-tricarboxamide (BTAs) was successfully synthesized, which exhibited outstanding guest responsive morphology transition properties. The morphology tuning studies was efficiently achieved with the addition of competitive guest molecules G1 and G2 by various self-assembly mechanisms. C3-PLT itself displays nanofiber morphology through H-type π-π stacking, and this nanofiber morphology can be completely transformed into spherical vesicles by host-guest interaction G1, while upon addition of G2 into C3-PLT by means of “exo-wall” electron-transfer interactions, sheet superstructures can be observed. SEM, 1H NMR, DOSY, fluorescence spectroscopy, and viscosity have verified the formation of supramolecular polymers and morphological transitions between C3-PLT with both guests.

Emergence of Homochiral Benzene-1,3,5-tricarboxamide Helical Assemblies and Catalysts upon Addition of an Achiral Monomer

Chirality amplification refers to the ability of a small chiral bias to fully control the main chain helicity of polymers and assemblies. Further implementation of functional chirally-amplified helices as switchable asymmetric catalysts, chiral sensors and circularly-polarized light emitters will require a greater control of the energetics governing these chirality amplification effects. In this work, we report on the counterintuitive ability of an achiral molecule to suppress conformational defects in supramolecular helices thus leading to the emergence of homochirality in a system containing a very small chiral bias. We focus our investigation on supramolecular helices composed of an achiral ben-zene-1,3,5-tricarboxamide (BTA) ligand, coordinated to copper, and an enantiopure BTA co-monomer. Amplification of chirality as probed by varying the amount (sergeants-and-soldiers effect) or the optical purity (diluted majority-rules effect) of the enanti-opure co-monomer, are modest in this initial system. However, both effects are hugely enhanced upon addition of a second achiral BTA monomer leading to a perfect control of the helicity either by means of a remarkably low amount of sergeants (0.5%) or a small bias from a racemic mixture of enantiopure co-monomers (10% e.e.). Such an enhancement in the amplification of chirality is only achieved by mixing the three components, i.e. the two achiral and the enantiopure co-monomers, highlighting a synergistic effect upon co-assembly of the three monomers. Investigation of the role of the achiral additive by multifarious analytical techniques supports its ability to stabilize the helical co-assemblies and suppress helix reversals i.e. conformational defects. Implementation of these helical copper precatalysts in the hydrosilylation of 1-(4-nitrophenyl)ethanone confirms that the effect of the achiral BTA additive is also operative under the conditions of the catalytic experiment. A highly enantioenriched product (90% e.e.) is produced by a supramolecular catalyst operating with ppm levels of chiral species.

Tunable morphologies and emission of photosensitive supramolecular self-assemblies through positional and trans-cis isomerization.

Cyanostilbene units are widely attractive as photoresponsive supramolecular building blocks whose structures and emission can be modulated by trans-cis isomerization. Generally, the change of properties is related to the molecular structure of cyanostilbene, which is still unpredictable and needs to be explored. Herein, two benzene-1,3,5-tricarboxamide (BTA) based cyanostilbene derivatives with different cyano positions have been designed to investigate the emission as well as structural changes during the trans-cis photoisomerization process in monomer and aggregation states, respectively. In the monomer state, the derivative with cyano groups at the outer position, β-BTTPA, exhibits obvious emission enhancement upon UV irradiation, while the other derivative (α-BTTPA) shows emission quenching. In addition, upon the formation of aggregates, β-BTTPA forms nano-level fibers with blue-green emission, but α-BTTPA forms micron-level flat ribbons with blue emission. More importantly, also driven by the trans-cis photoisomerization, the self-assemblies show morphological transitions (ribbons/fibers to spheres) due to the fact that the equilibrium of the system is broken by the photoreactions. Such changes further contribute to emission switching as well as enhanced hydrophobic properties.

Tuning the Length of Cooperative Supramolecular Polymers under Thermodynamic Control.

In the field of supramolecular (co)polymerizations, the ability to predict and control the composition and length of the supramolecular (co)polymers is a topic of great interest. In this work, we elucidate the mechanism that controls the polymer length in a two-component cooperative supramolecular polymerization and unveil the role of the second component in the system. We focus on the supramolecular copolymerization between two derivatives of benzene-1,3,5-tricarboxamide (BTA) monomers: a-BTA and Nle-BTA. As a single component, a-BTA cooperatively polymerizes into long supramolecular polymers, whereas Nle-BTA only forms dimers. By mixing a-BTA and Nle-BTA in different ratios, two-component systems are obtained, which are analyzed in-depth by combining spectroscopy and light-scattering techniques with theoretical modeling. The results show that the length of the supramolecular polymers formed by a-BTA is controlled by competitive sequestration of a-BTA monomers by Nle-BTA, while the obvious alternative Nle-BTA acts as a chain-capper is not operative. This sequestration of a-BTA leads to short, stable species coexisting with long cooperative aggregates. The analysis of the experimental data by theoretical modeling elucidates the thermodynamic parameters of the copolymerization, the distributions of the various species, and the composition and length of the supramolecular polymers at various mixing ratios of a-BTA and Nle-BTA. Moreover, the model was used to generalize our results and to predict the impact of adding a chain-capper or a competitor on the length of the cooperative supramolecular polymers under thermodynamic control. Overall, this work unveils comprehensive guidelines to master the nature of supramolecular (co)polymers and brings the field one step closer to applications.

Detailed Approach to Investigate Thermodynamically Controlled Supramolecular Copolymerizations.

Elucidating the microstructure of supramolecular copolymers remains challenging, despite the progress in the field of supramolecular polymers. In this work, we present a detailed approach to investigate supramolecular copolymerizations under thermodynamic control. Our approach provides insight into the interactions of different types of monomers and hereby allows elucidating the microstructure of copolymers. We select two monomers that undergo cooperative supramolecular polymerization by way of threefold intermolecular hydrogen bonding in a helical manner, namely, benzene-1,3,5-tricarboxamide (BTA) and benzene-1,3,5-tris(carbothioamide) (thioBTA). Two enantiomeric forms and an achiral analogue of BTA and thioBTA are synthesized and their homo- and copolymerizations are studied using light scattering techniques, infrared, ultraviolet, and circular dichroism spectroscopy. After quantifying the thermodynamic parameters describing the homopolymerizations, we outline a method to follow the self-assembly of thioBTA derivatives in the copolymerization with BTA, which involves monitoring a characteristic spectroscopic signature as a function of temperature and relative concentration. Using modified types of sergeants-and-soldiers and majority-rules experiments, we obtain insights into the degree of aggregation and the net helicity. In addition, we apply a theoretical model of supramolecular copolymerization to substantiate the experimental results. We find that the model describes the two-component system well and allows deriving the hetero-interaction energies. The interactions between the same kinds of monomers (BTA–BTA and thioBTA–thioBTA) are slightly more favorable than those between different monomers (BTA–thioBTA), corresponding to a nearly random copolymerization. Finally, to study the interactions of the monomers at the molecular level, we perform density functional theory-based computations. The results corroborate that the two-component system exhibits a random distribution of the two monomer units along the copolymer chain.

The influence of directed hydrogen bonds on the self-assembly of amphiphilic polymers in water

HypothesisMolecules forming directed intermolecular hydrogen bonds, such as the well-known benzene-1,3,5-tricarboxamides (BTA) motif, are known to self-assemble into long fibrous structures. However, only a few of these systems have so far demonstrated the ability to form such anisotropic nanostructures, if they are combined with hydrophilic polymers to create an amphiphilic material. Here, we designed BTA-polymer conjugates to investigate whether the directionality of the hydrogen bonds or the ratio of hydrophobic to hydrophilic parts of the molecule, and thus the packing parameter, is decisive for obtaining anisotropic supramolecular structures in water. ExperimentsPoly(ethylene glycol) was conjugated to BTA moieties with varying lengths of hydrophobic alkyl spacers ranging from two to twelve methylene units. The resulting amphiphilic materials were characterized in aqueous solution by light and small-angle neutron scattering, analytical ultracentrifugation, and cryo-transmission electron microscopy. FindingsWhile spherical micelles were observed for C6 and C10 alkyl spacers, anisotropic structures were only present in case of the C12 spacer. The comparison to an analogous material, which lacks the directed hydrogen bonds, revealed that the BTA motif cannot provide a sufficient driving force to induce anisotropic structures, but increases the packing density in the hydrophobic part. Therefore, the packing parameter governs the appearance of anisotropic aggregates.

Elucidating the Ordering in Self-Assembled Glycocalyx Mimicking Supramolecular Copolymers in Water.

Polysaccharides present in the glycocalyx and extracellular matrix are highly important for a multitude of functions. Oligo- and polysaccharides-based biomaterials are being developed to mimic the glycocalyx, but the spatial functionalization of these polysaccharides represents a major challenge. In this paper, a series of benzene-1,3,5-tricarboxamide (BTA) based supramolecular monomers is designed and synthesized with mono- (BTA-β-d-glucose; BTA-Glc and BTA-α-d-mannose; BTA-Man) or disaccharides (BTA-β-d-cellobiose; BTA-Cel) at their periphery or a monosaccharide (BTA-OEG4-α-d-mannose; BTA-OEG4-Man) at the end of a tetraethylene glycol linker. These glycosylated BTAs have been used to generate supramolecular assemblies and it is shown that the nature of the carbohydrate appendage is crucial for the supramolecular (co)polymerization behavior. BTA-Glc and BTA-Man are shown to assemble into micrometers long 1D (bundled) fibers with opposite helicities, whereas BTA-Cel and BTA-OEG4-Man formed small spherical micelles. The latter two monomers are used in a copolymerization approach with BTA-Glc, BTA-Man, or ethylene glycol BTA (BTA-OEG4) to give 1D fibers with BTA-Cel or BTA-OEG4-Man incorporated. Consequently, the carbohydrate appendage influences both the assembly behavior and the internal order. Using this approach it is possible to create 1D-fibers with adjustable saccharide densities exhibiting tailored dynamic exchange profiles. Furthermore, hydrogels with tunable mechanical properties can be achieved, opening up possibilities for the development of multicomponent functional biomaterials.

N-Substituted Benzene-1-Urea-3,5-Biscarboxamide (BUBA): Easily Accessible C2 -Symmetric Monomers for the Construction of Reversible and Chirally Amplified Helical Assemblies.

Non-C3 -symmetric supramolecular helices are gaining interest for the design of hierarchical assemblies, for the compartmentalisation or the self-assembly of polymer chains and for application in asymmetric catalysis. Herein, N-substituted benzene-1-urea-3,5-biscarboxamide (BUBA) monomers, which consist of one urea and two carbon-connected amide functions linked to an aromatic ring, are introduced as an easily accessible class of C2 -symmetric supramolecular synthons. In apolar solvents, BUBA monomers assemble into long helical assemblies by means of hydrogen-bonding and aromatic interactions, as assessed by several analytical techniques. To probe the influence of the urea function, BUBA and related benzene-1,3,5-tricarboxamide (BTA) helical polymers have been compared, in terms of their thermodynamics of formation, stability, reversibility and chiral amplification properties. Similar to BTA, BUBA monomers form long helices reversibly through a highly cooperative mechanism and the helicity of their assemblies is governed by chiral amplification effects. However, precise quantification of their properties reveals that BUBA monomers assemble in a more cooperative manner. Also, chiral amplification operates to a higher extent in BUBA helices, as probed by both sergeants-and-soldiers and majority-rules experiments. Compatibility between urea and amide functions also allows the formation of co-assemblies that incorporate both BUBA and BTA monomers. Importantly, a small amount of chiral BUBA monomers in these co-assemblies is sufficient to obtain single-handed helices; thus paving the way towards the development of functional supramolecular helices.

Supramolecular design of Benzene-1,3,5-Tricarboxamide with Hydrophobic Alkyl side chains toward long-range liquid crystalline properties

Herein we report the first approach of benzene-1,3,5-tricarboxamides (BTAs) with long-range liquid crystalline properties by utilizing hydrophobic alkyl side chains at the amide functional group. These compounds were successfully prepared in high yields by reacting 1,3,5-benzenetricarbonyl trichloride with series of aliphatic linear alkyl amines as the side chains. By increasing the length of hydrocarbon chains at the amino, thermograms of BTAs showed the formation of mesophase rangesbetween 21.8- 196.3, 41.9 - 212.4, 57.9 - 203.7, 76.1 - 207.7 and 80.5 - 200.1 degrees for decylamine, dodecylamine, tetradecylamine, hexadecylamineand octadecylamine, respectively. Such liquid crystalline properties indicate the formation of self-assembly through supramolecular interactions with a lamellar structure. In particular, benzene tricarboxamide with short alkyl chains will reduce the Van der Waals interactions to give room temperature range of mesophase structure.

Insights into the Kinetics of Supramolecular Comonomer Incorporation in Water.

Multicomponent supramolecular polymers are a versatile platform to prepare functional architectures, but a few studies have been devoted to investigate their noncovalent synthesis. Here, we study supramolecular copolymerizations by examining the mechanism and time scales associated with the incorporation of new monomers in benzene-1,3,5-tricarboxamide (BTA)-based supramolecular polymers. The BTA molecules in this study all contain three tetra(ethylene glycol) chains at the periphery for water solubility but differ in their alkyl chains that feature either 10, 12 or 13 methylene units. C10BTA does not form ordered supramolecular assemblies, whereas C12BTA and C13BTA both form high aspect ratio supramolecular polymers. First, we illustrate that C10BTA can mix into the supramolecular polymers based on either C12BTA or C13BTA by comparing the temperature response of the equilibrated mixtures to the temperature response of the individual components in water. Subsequently, we mix C10BTA with the polymers and follow the copolymerization over time with UV spectroscopy and hydrogen/deuterium exchange mass spectrometry experiments. Interestingly, the time scales obtained in both experiments reveal significant differences in the rates of copolymerization. Coarse-grained simulations are used to study the incorporation pathway and kinetics of the C10BTA monomers into the different polymers. The results demonstrate that the kinetic stability of the host supramolecular polymer controls the rate at which new monomers can enter the existing supramolecular polymers.

A Three-Armed Polymer with Tunable Self-Assembly and Self-Healing Properties Based on Benzene-1,3,5-tricarboxamide and Metal-Ligand Interactions.

The dynamic nature of supramolecules makes them useful in the fields of smart devices. The combination of multiple dynamic interactions in one material may bring some enhanced properties in mechanical property, self-healing property, or recyclability. Thus, it is significantly meaningful to design new materials with multi-dynamic bonds and clarify their bonding mechanisms. Here, a novel three-armed polymer based on benzene-1,3,5-tricarboxamide (BTA) is developed and the polymer could be further complexed by metal ions to form dynamic zinc-imidazole interactions. In this system, BTA is located in the center, and the ligand-functionalized monomer is copolymerized with n-butyl acrylate to form three chains. This is the first time BTA is introduced to a self-healing system to endow the polymer with assembly and self-healing properties. The composition, chemical structure, assembly behavior, mechanical properties, and self-healing properties of the polymer are investigated. It is revealed that the assembly behavior of the polymer depends on the BTA contents and time. The mechanical property can be easily tuned by ligand/metal ratio and is significantly adjusted by the polymer chain length and environment humidity. Long polymer chains not only contribute to good mechanical property but also promote the self-healing process due to the effective physical entanglement.

2D covalent organic frameworks with built-in amide active sites for efficient heterogeneous catalysis.

Benzene-1,3,5-tricarboxamides (BTAs) are versatile building blocks for supramolecular assembly due to the strong intermolecular hydrogen bonding. Herein, a BTA based amine, N1,N3,N5-tris(4-aminophenyl)benzene-1,3,5-tricarboxamide (TABTA), was successfully applied to construct two new amide functionalized covalent organic frameworks (COFs) with apparent crystallinity, which were further applied as efficient catalysts for Knoevenagel condensation.

The effect of monosaccharides on self-assembly of benzenetricarboxamides

The interaction between monosaccharides exhibits an important role in the assembly of monosaccharide-containing molecules. In this work, three common monosaccharides, glucose, galactose and mannose, are employed to investigate the effect of monosaccharide on the self-assembly of benzenetricarboxamide (BTA) core-containing molecules. In the presence of monosaccharides, three benzenetricarboxamide derivatives aggregate into different ordered structures. When alanine linkers are introduced to these molecules between the core and the monosacchride, morphologies of three types of monosaccharide BTAs turned to disordered, meanwhile their structures become similar with the increase of the length of alanine linkers, indicating the disappearance of the monosaccharide effects.

Fluorescence Regulation and Photoresponsivity in AIEE Supramolecular Gels Based on a Cyanostilbene Modified Benzene-1,3,5-Tricarboxamide Derivative.

Supramolecular interactions play an important role in regulating the optical properties of molecular materials. Different arrangements of identical molecules can afford a more straightforward insight into the contributions of supramolecular interactions. Herein, a novel gelator, BTTPA, composed of a benzene-1,3,5-tricarboxamide (BTA) central unit functionalized with three cyanostilbenes is designed, which forms two kinds of gels in DMSO/water mixtures. Depending on the water volume content, the gels exhibit quite different aggregation-induced emission enhancement (AIEE) properties, with one emitting a green emission (G-gel), and the second emitting a blue emission (B-gel). The main reason for this difference is that water affects H-bonding and π-π interactions, further resulting in disparate packing modes of gelators. In addition, only the G-gel displays gel-to-sol transition accompanied with fluorescence switching according to the trans-cis photoisomerization of cyanostilbene under UV light irradiation. The B-gel does not exhibit any change because of its tight hexagonal packing arrangement. Such packing modes restricted the space in which molecules were located and inhibited the transformation of configuration of cyanostilbene. These phenomena underline the incomparable status of packing modes and molecular configuration in regulating fluorescence properties and photoresponse behavior in organic solid-state luminescent materials.

Effect of Intra- versus Intermolecular Cross-Linking on the Supramolecular Folding of a Polymer Chain.

Anfinsen’s famous experiment showed that the restoration of catalytic activity of a completely unfolded ribonuclease A is only possible when the correct order of events is followed during the refolding process. Inspired by this work, the effect of structural constraints induced by covalent cross-links on the folding of a synthetic polymer chain via hydrogen-bonding interactions is investigated. Hereto, methacrylate-based monomers comprising either benzene-1,3,5-tricarboxamide (BTA)-based or coumarin-based pendants are copolymerized with n-butyl methacrylate in various ratios via reversible addition–fragmentation chain-transfer (RAFT) polymerization. To assess whether the folding and single-chain polymeric nanoparticle (SCPN) formation depend on the order of events, we compare two folding pathways. In the one case, we first covalently cross-link the coumarin pendants within the polymers in a solvent that prevents hydrogen bonding, after which hydrogen bonding is activated, inducing folding of the polymer. In the other case, we induce hydrogen-bonding interactions between tethered BTAs prior to covalent cross-linking of the coumarin pendants. A combination of circular dichroism (CD) spectroscopy, UV–vis spectroscopy, size-exclusion chromatography (SEC), and dynamic light scattering (DLS) is employed to understand the effect of the structural constraints on the folding behavior of these synthetic polymers. The results show that like in ribonuclease A, the order of events matters greatly and determines the outcome. Importantly, a hydrogen-bond-promoting solvent prevents the formation of SCPNs upon covalent cross-linking and results in multichain aggregates. In contrast, covalently cross-linking the polymer when no hydrogen bonds are present followed by inducing hydrogen bonding favors the formation of SCPNs above the UCST of the methacrylate-based polymer. To our surprise, the two systems show a fundamentally different response to changes in temperature, indicating that also in synthetic polymers differences in the folding pathway induce differences in the properties of the resultant nanostructures.

Polymorphism in Benzene-1,3,5-tricarboxamide Supramolecular Assemblies in Water: A Subtle Trade-off between Structure and Dynamics.

In biology, polymorphism is a well-known phenomenon by which a discrete biomacromolecule can adopt multiple specific conformations in response to its environment. The controlled incorporation of polymorphism into noncovalent aqueous assemblies of synthetic small molecules is an important step toward the development of bioinspired responsive materials. Herein, we report on a family of carboxylic acid functionalized water-soluble benzene-1,3,5-tricarboxamides (BTAs) that self-assemble in water to form one-dimensional fibers, membranes, and hollow nanotubes. Interestingly, one of the BTAs with the optimized position of the carboxylic group in the hydrophobic domain yields nanotubes that undergo reversible temperature-dependent dynamic reorganizations. SAXS and Cryo-TEM data show the formation of elongated, well-ordered nanotubes at elevated temperatures. At these temperatures, increased dynamics, as measured by hydrogen–deuterium exchange, provide enough flexibility to the system to form well-defined nanotube structures with apparently defect-free tube walls. Without this flexibility, the assemblies are frozen into a variety of structures that are very similar at the supramolecular level, but less defined at the mesoscopic level.

Accelerating DNA-Based Computing on a Supramolecular Polymer.

Dynamic DNA-based circuits represent versatile systems to perform complex computing operations at the molecular level. However, the majority of DNA circuits relies on freely diffusing reactants, which slows down their rate of operation substantially. Here we introduce the use of DNA-functionalized benzene-1,3,5-tricarboxamide (BTA) supramolecular polymers as dynamic scaffolds to template DNA-based molecular computing. By selectively recruiting DNA circuit components to a supramolecular BTA polymer functionalized with 10-nucleotide handle strands, the kinetics of strand displacement and strand exchange reactions were accelerated 100-fold. In addition, strand exchange reactions were also favored thermodynamically by bivalent interactions between the reaction product and the supramolecular polymer. The noncovalent assembly of the supramolecular polymers enabled straightforward optimization of the polymer composition to best suit various applications. The ability of supramolecular BTA polymers to increase the efficiency of DNA-based computing was demonstrated for three well-known and practically important DNA-computing operations: multi-input AND gates, Catalytic Hairpin Assembly and Hybridization Chain Reactions. This work thus establishes supramolecular BTA polymers as an efficient platform for DNA-based molecular operations, paving the way for the construction of autonomous bionanomolecular systems that confine and combine molecular sensing, computation, and actuation.

Supramolecular Copolymerization as a Strategy to Control the Stability of Self‐Assembled Nanofibers

AbstractA major challenge in supramolecular polymerization is controlling the stability of the polymers formed, that is, controlling the rate of monomer exchange in the equilibrium between monomer and polymer. The exchange dynamics of supramolecular polymers based on benzene‐1,3,5‐tricarboxamide (BTA) can be regulated by copolymerizing molecules with dendronized (dBTA) and linear (nBTA) ethylene glycol‐based water‐soluble side chains. Whereas nBTAs form long nanofibers in water, dBTAs do not polymerize, forming instead small spherical aggregates. The copolymerization of the two BTAs results in long nanofibers. The exchange dynamics of both the BTA monomers in the copolymer are significantly slowed down in the mixed systems, leading to a more stable copolymer, while the morphology and spectroscopic signature of the copolymers are identical to that of nBTA homopolymer. This copolymerization is the supramolecular counterpart of styrene/ maleic anhydride copolymerization.

Supramolecular Copolymerization as a Strategy to Control the Stability of Self-Assembled Nanofibers.

A major challenge in supramolecular polymerization is controlling the stability of the polymers formed, that is, controlling the rate of monomer exchange in the equilibrium between monomer and polymer. The exchange dynamics of supramolecular polymers based on benzene-1,3,5-tricarboxamide (BTA) can be regulated by copolymerizing molecules with dendronized (dBTA) and linear (nBTA) ethylene glycol-based water-soluble side chains. Whereas nBTAs form long nanofibers in water, dBTAs do not polymerize, forming instead small spherical aggregates. The copolymerization of the two BTAs results in long nanofibers. The exchange dynamics of both the BTA monomers in the copolymer are significantly slowed down in the mixed systems, leading to a more stable copolymer, while the morphology and spectroscopic signature of the copolymers are identical to that of nBTA homopolymer. This copolymerization is the supramolecular counterpart of styrene/ maleic anhydride copolymerization.

Controlling protein activity by dynamic recruitment on a supramolecular polymer platform

Nature uses dynamic molecular platforms for the recruitment of weakly associating proteins into higher-order assemblies to achieve spatiotemporal control of signal transduction. Nanostructures that emulate this dynamic behavior require features such as plasticity, specificity and reversibility. Here we introduce a synthetic protein recruitment platform that combines the dynamics of supramolecular polymers with the programmability offered by DNA-mediated protein recruitment. Assembly of benzene-1,3,5-tricarboxamide (BTA) derivatives functionalized with a 10-nucleotide receptor strand into µm-long supramolecular BTA polymers is remarkably robust, even with high contents of DNA-functionalized BTA monomers and associated proteins. Specific recruitment of DNA-conjugated proteins on the supramolecular polymer results in a 1000-fold increase in protein complex formation, while at the same time enabling their rapid exchange along the BTA polymer. Our results establish supramolecular BTA polymers as a generic protein recruitment platform and demonstrate how assembly of protein complexes along the supramolecular polymer allows efficient and dynamic control of protein activity.