Benzene-1,3,5-tricarboxamide Research Articles

Enhanced Stability and Properties of Benzene-1,3,5-Tricarboxamide Supramolecular Copolymers through Engineered Coupled Equilibria.

Improving the stability of multi-component and functional assemblies such as supramolecular copolymers without impeding their dynamicity is key for their implementation as innovative materials. Up to now, this has been achieved by a trial-and-error approach, requiring the time-consuming characterization of a series of supramolecular coassemblies. We report herein that this is possible to significantly enhance the stability of supramolecular copolymers by a minimal change in the chemical nature of one of the interacting monomers. This is achieved by replacing an ester function by an ether function in the structure of a chiral benzene-1,3,5-tricarboxamide (BTA) monomer, used as "sergeant", coassembled with achiral monomers, the "soldiers". Pseudo-phase diagrams, constructed by probing the nature of the coassemblies with multifarious analytical techniques, confirm that the greater stability of the resulting copolymers is mainly due to the minimization of competing species. This leads to better rheological and catalytic properties of the corresponding supramolecular copolymers. Favouring coassembly over undesired assembly pathways must be considered as a blueprint for the development of better-performing supramolecular multi-component systems.

Enhanced Stability and Properties of Benzene‐1,3,5‐Tricarboxamide Supramolecular Copolymers through Engineered Coupled Equilibria**

AbstractImproving the stability of multi‐component and functional assemblies such as supramolecular copolymers without impeding their dynamicity is key for their implementation as innovative materials. Up to now, this has been achieved by a trial‐and‐error approach, requiring the time‐consuming characterization of a series of supramolecular coassemblies. We report herein that this is possible to significantly enhance the stability of supramolecular copolymers by a minimal change in the chemical nature of one of the interacting monomers. This is achieved by replacing an ester function by an ether function in the structure of a chiral benzene‐1,3,5‐tricarboxamide (BTA) monomer, used as “sergeant”, coassembled with achiral monomers, the “soldiers”. Pseudo‐phase diagrams, constructed by probing the nature of the coassemblies with multifarious analytical techniques, confirm that the greater stability of the resulting copolymers is mainly due to the minimization of competing species. This leads to better rheological and catalytic properties of the corresponding supramolecular copolymers. Favouring coassembly over undesired assembly pathways must be considered as a blueprint for the development of better‐performing supramolecular multi‐component systems.

Long-Lived Triplets from Singlet Fission in Pentacene-Decorated Helical Supramolecular Polymers.

Singlet fission (SF), which involves the conversion of a singlet excited state into two triplet excitons, holds great potential to boost the efficiency of photovoltaics. However, losses due to triplet-triplet annihilation hamper the efficient harvesting of SF-generated triplet excitons, which limits an effective implementation in solar energy conversion schemes. A fundamental understanding of the underlying structure-property relationships is thus crucial to define design principles for cutting-edge SF materials, yet it remains elusive. Herein, we harness helical supramolecular polymers decorated with pentacene side groups to elucidate intermolecular SF dynamics in solution and promote the formation of long-lived mobile triplets. By leveraging the hydrogen bonding-driven assembly of benzene-1,3,5-tricarboxamide (BTA) cores into one-dimensional scaffolds, we direct the organization of appended pentacene motifs into long-range ordered helical frameworks. Dynamic interactions between weakly coupled SF pendants mediate singlet conversion within hundreds of picoseconds, affording triplet quantum yields well above 100%. Moreover, analysis of triplet dynamics with a Monte Carlo simulation model reveals that triplet diffusion along the supramolecular fibers is favored over annihilation, resulting in independent triplets exhibiting considerably slow decay on the time scale of tens of microseconds. The molecular packing within the assembly is tuned by subtle changes in monomer design to increase the rate and efficiency of SF while ensuring exceptionally long-lived mobile triplets, allowing to maintain triplet quantum yields exceeding 100% for at least 100 ns. This work opens new opportunities to exploit self-assembled supramolecular polymers as functional templates to achieve long-lived SF-generated triplets.

Designing Stimuli-Responsive Supramolecular Gels by Tuning the Non-Covalent Interactions of the Functional Groups.

The physical characteristics of a supramolecular gel are greatly influenced by the nature and arrangement of functional groups in the gelator. This work focuses on the impact of the functional groups, specifically the hydroxyl group, on the stimuli-responsive properties of a gel. We used a C3-symmetric benzene-1,3,5-tricarboxamide (BTA) platform, which was attached to the methyl ester of phenylalanine (MPBTA) and tyrosine (MTBTA). The gelation studies revealed that MPBTA gelled in alcohols, non-polar aromatic solvents, and aqueous mixtures (1:1, v/v) of high-polar solvents, whereas MTBTA gelled only in an aqueous mixture of DMF (1:1, v/v). The mechanical and thermal strength of the gels were evaluated by rheological and Tgel studies, and the results indicated that MPBTA gels were stronger than MTBTA gels. The gels were characterized by powder X-ray diffraction and scanning electron microscopy (SEM). The analysis of stimuli-responsive properties revealed that MPBTA gels were intact in the presence of sodium/potassium salts, but the MTBTA gel network was disrupted. These results indicate that the elegant choice of functional groups could be used to tune the constructive or destructive stimuli-responsive behavior of gels. This study highlights the significant role of functional groups in modulating the stimuli-responsive properties of supramolecular gels.

Visualizing the Heterogeneity in Homogeneous Supramolecular Polymers.

The dynamic properties of supramolecular polymers enable new functionality beyond the limitations of conventional polymers. The mechanism of the monomer exchange between different supramolecular polymers is proposed to be closely associated with local disordered domains within the supramolecular polymers. However, a direct detection of such heterogeneity has never been experimentally probed. Here, we present the direct visualization of the local disordered domains in the backbone of supramolecular polymers by a super-resolution microscopy technique: Nile Red-based spectrally resolved point accumulation for imaging in nanoscale topography (NR-sPAINT). We investigate the local disordered domains in trisamide-based supramolecular polymers comprising a (co)assembly of benzene-1,3,5-tricarboxamide (BTA) and a variant with one of the amide bonds inverted (iBTA). The NR-sPAINT allows us to simultaneously map the spatial distribution and polarity of the local disordered domains along the polymers with a spatial precision down to ∼20 nm. Quantitative autocorrelation and cross-correlation analysis show subtle differences in the spatial distribution of the disordered domains between polymers composed of different variants of BTA monomers. Further, statistical analysis unraveled high heterogeneity in monomer packing at both intra- and interpolymer levels. The results reported here demonstrate the necessity of investigating the structures in soft materials at nanoscale to fully understand their intricacy.

Unveiling the Liquid‐Liquid Phase Separation of Benzene‐1,3,5‐Tricarboxamide in Water

AbstractThe intricate interplay between self‐assembly and phase separation orchestrates biomolecular organization inside cells, thereby dictating the formation of vital structures such as protein assemblies and membraneless organelles (MLOs). However, in the context of supramolecular polymerization, these fundamental processes have traditionally been studied separately. This study reevaluates the supramolecular polymerization process to unveil the presence of phase‐separated droplet state. Utilizing the well‐studied benzene‐1,3,5‐tricarboxamide (BTA) supramolecular motif, we explore its thermally driven liquid‐liquid phase separation (LLPS). Thermodynamic and kinetic analysis, employing temperature‐dependent spectroscopic and microscopic techniques, elucidates the distinct BTA states and their evolution towards the thermodynamic fiber state. This research sheds light on the existence of hidden phases of supramolecular monomers, emphasizing the delicate balance of non‐covalent interactions among monomers and with solvents in governing self‐assembly vs. phase separation. This is particularly important in comprehending phase separation in the biological realm such as in MLOs, and for applications such as condensate‐modifying therapeutics.

Switchable supramolecular helices for asymmetric stereodivergent catalysis

Despite recent developments on the design of dynamic catalysts, none of them have been exploited for the in-situ control of multiple stereogenic centers in a single molecular scaffold. We report herein that it is possible to obtain in majority any amongst the four possible stereoisomers of an amino alcohol by means of a switchable asymmetric catalyst built on supramolecular helices. Hydrogen-bonded assemblies between a benzene-1,3,5-tricarboxamide (BTA) achiral phosphine ligand coordinated to copper and a chiral BTA comonomer are engaged in a copper-hydride catalyzed hydrosilylation and hydroamination cascade process. The nature of the product stereoisomer is related to the handedness of the helices and can thus be directed in a predictable way by changing the nature of the major enantiomer of the BTA comonomer present in the assemblies. The strategy allows all stereoisomers to be obtained one-pot with similar selectivities by conducting the cascade reaction in a concomitant manner, i.e. without inverting the handedness of the helices, or sequentially, i.e. by switching the handedness of the supramolecular helices between the hydrosilylation and hydroamination steps. Supramolecular helical catalysts appear as a unique and versatile platform to control the configuration of molecules or polymers embedding several stereogenic centers.

Structural design of a supergelator: Influence of the alkyl chain isomers on gelation behaviors, thermal stabilities, and supramolecular structures

Supramolecular gels have received a lot of attention due to their unique properties and potential applications. However, it is difficult to determine the relationship between the molecular structures of gelators and the influencing factors. To understand how the different alkyl chain isomers govern the gelation behaviors, benzene-1,3,5-tricarboxamide (BTA) derivatives have been designed and synthesized. Although these derivatives have the same molecular formula, the alkyl chain configurations are different on the amide bonds. The gelation behaviors indicated that BTA derivatives had obviously different gelation properties. Specifically, BTA–3C8 could only form organogels in cyclohexane, and it exhibited poor gelation properties. BTA–3MeC7 formed stable organogels in low-polar solvents. BTA–3EtC6 possessed excellent gelation properties, and it formed organogels in almost all the tested solvents. BTA–3BuC4 exhibited gelation abilities in a limited number of solvents. The thermal stabilities and the morphologies of organogels were determined. The results indicated that the alkyl chain groups of gelators significantly affected the thermal stabilities and the supramolecular structures of organogels. Using the FT–IR technique and XRD characterization, we investigated the main driving force and the molecular stacking patterns of the gelators. The results indicated that hydrogen bonds acted as the main driving force for the formation of gels. Moreover, the gelator molecules were self-assembled to form ordered and layered structures. Finally, the mechanism of the organogel formation was proposed. This study provides a useful idea for the preparation of soft materials with controllable supramolecular structures or special properties.

In Situ Covalent Reinforcement of a Benzene-1,3,5-Tricarboxamide Supramolecular Polymer Enables Biomimetic, Tough, and Fibrous Hydrogels and Bioinks.

Synthetic hydrogels often lack the load-bearing capacity and mechanical properties of native biopolymers found in tissue, such as cartilage. In natural tissues, toughness is often imparted via the combination of fibrous noncovalent self-assembly with key covalent bond formation. This controlled combination of supramolecular and covalent interactions remains difficult to engineer, yet can provide a clear strategy for advanced biomaterials. Here, a synthetic supramolecular/covalent strategy is investigated for creating a tough hydrogel that embodies the hierarchical fibrous architecture of the extracellular matrix (ECM). A benzene-1,3,5-tricarboxamide (BTA) hydrogelator is developed with synthetically addressable norbornene handles that self-assembles to form a and viscoelastic hydrogel. Inspired by collagen's covalent cross-linking of fibrils, the mechanical properties are reinforced by covalent intra- and interfiber cross-links. At over 90% water, the hydrogels withstand up to 550% tensile strain, 90% compressive strain, and dissipated energy with recoverable hysteresis. The hydrogels are shear-thinning, can be 3D bioprinted with good shape fidelity, and can be toughened viacovalent cross-linking. These materials enable the bioprinting of human mesenchymal stromal cell (hMSC) spheroids and subsequent differentiation into chondrogenic tissue. Collectively, these findings highlight the power of covalent reinforcementof supramolecular fibers, offering a strategy for the bottom-up design of dynamic, yet tough, hydrogels and bioinks.

Probing Achiral Benzene‐1,3,5‐tricarboxamide Monomers as Inducers of Homochirality in Supramolecular Helical Catalysts**

AbstractAdding a complementary achiral monomer to polymers embedding a mixture of enantiopure monomers (the “sergeants”) and achiral monomers (the “soldiers”) is expected to decrease the optical purity of the polymer main chain. This study reports the influence of such achiral benzene‐1,3,5‐tricarboxamide (BTA) additives on the properties of “sergeants‐and‐soldiers” mixtures composed of an achiral BTA ligand coordinated to copper and of an enantiopure BTA monomer. Whilst N,N’,N’’‐tris(octyl)benzene‐1,3,5‐tricarboxamide (BTA C8) shows no significant improvement in term of enantioselectivity in the catalytic reaction of reference, achiral BTA monomers derived from α,α’‐disubstituted amino esters all lead to an increase in the selectivity at low “sergeant” ratio. This different behaviour was probed by characterizing the coassemblies embedding BTA C8, i. e. the worst‐performing achiral additive, and the BTA derived from the ester of 1‐aminocyclohexane carboxylic acid (BTA Achc), the best‐performing one. Both additives were found to efficiently intercalate with the ligand and the “sergeant” leading to the formation of single helices. However, only the terpolymer embedding BTA Achc appears to be homochiral, accounting for the good enantioselectivity even at very low “sergeant” ratio (0.25 %).

Controlling Helical Asymmetry in Supramolecular Copolymers by In Situ Chemical Modification.

Amplification of asymmetry in complex molecular systems results from a delicate interplay of chiral supramolecular structures and their chemical reactivity. In this work, we show how the helicity of supramolecular assemblies can be controlled by performing a non-stereoselective methylation reaction on comonomers. By methylating chiral glutamic acid side chains in benzene-1,3,5-tricarboxamide (BTA) derivatives to form methyl esters, the assembly properties are modulated. As reacted comonomers, the methyl ester-BTAs induce a stronger bias in the screw-sense of helical fibers predominantly composed of stacked achiral alkyl-BTA monomers. Hence, applying the in situ methylation in a system with the glutamic acid-BTA comonomer induces asymmetry amplification. Moreover, mixing small quantities of enantiomers of glutamic acid-BTA and glutamate methyl ester-BTA in the presence of the achiral alkyl-BTAs leads to deracemization and inversion of the helical structures in solution via the in situ reaction toward a thermodynamic equilibrium. Theoretical modeling suggests that the observed effects are caused by enhanced comonomer interactions after the chemical modification. Our presented methodology enables on-demand control over asymmetry in ordered functional supramolecular materials.

Molecular Tuning of a Benzene-1,3,5-Tricarboxamide Supramolecular Fibrous Hydrogel Enables Control over Viscoelasticity and Creates Tunable ECM-Mimetic Hydrogels and Bioinks.

Traditional synthetic covalent hydrogels lack the native tissue dynamics and hierarchical fibrous structure found in the extracellular matrix (ECM). These dynamics and fibrous nanostructures are imperative in obtaining the correct cell/material interactions. Consequently, the challenge to engineer functional dynamics in a fibrous hydrogel and recapitulate native ECM properties remains a bottle-neck to biomimetic hydrogel environments. Here,the molecular tuning of a supramolecular benzene-1,3,5-tricarboxamide (BTA) hydrogelator via simple modulation of hydrophobic substituents is reported. This tuning results in fibrous hydrogels with accessible viscoelasticity over 5 orders of magnitude, while maintaining a constant equilibrium storage modulus. BTA hydrogelators are created with systematic variations in the number ofhydrophobic carbon atoms, and this is observed to control the viscoelasticity and stress-relaxation timescales in a logarithmic fashion. Some of theseBTA hydrogels are shear-thinning, self-healing, extrudable, and injectable, and can be 3D printed into multiple layers. These hydrogels show high cell viability for chondrocytes and human mesenchymal stem cells, establishing their use in tissue engineering applications. This simple molecular tuning by changing hydrophobicity (with just a few carbon atoms) provides precise control over the viscoelasticity and 3D printability in fibrillar hydrogels and can be ported onto other 1D self-assembling structures. The molecular control and design of hydrogel network dynamics can push the field of supramolecular chemistry towardthe design of new ECM-mimicking hydrogelators for numerous cell-culture and tissue-engineering applications and give access towardhighly biomimetic bioinks for bioprinting.

Rationalizing the Extent of the "Sergeants-and-Soldiers" Effect in Supramolecular Helical Catalysts: Effect of Copper Coordination.

Aggregation of supramolecular helices, for example through interdigitation of their alkyl side chains or through more directional supramolecular interactions, leads to hierarchical architectures with original structural and chiroptical properties. However, when a chiral monomer (the "sergeant") is introduced as a minor component in these assemblies composed of a majority of achiral monomers (the "soldiers"), it is not clear how the aggregation changes the ability of the sergeant to induce a preferential helicity to the polymer main chain (the so-called "sergeants-and-soldiers" effect). This study reports a detailed investigation of the influence of [Cu(OAc)2 ⋅H2 O] coordination on the structure and chiroptical properties of helical hydrogen-bonded co-assemblies composed of a catalytically-active benzene-1,3,5-tricarboxamide (BTA) monomer, acting as the "soldier", and an enantiopure BTA monomer derived from cyclohexylalanine, playing the role of the "sergeant". The copper actually significantly influences the extent of the "sergeants-and-soldiers" effect since it acts as a crosslink that induces some chiral defects in the supramolecular helices. These crosslinks appear to be preserved during the catalytic hydrosilylation of 4-nitroacetophenone. The aggregation of helices through the formation of copper crosslinks is reversible since homochiral single helices are exclusively formed in the case of sergeant-rich assemblies. The fact that both main chain and side chain aggregation affects the chiroptical properties of supramolecular helices must be considered in the design of elaborated chiral materials.

Dynamic-Covalent Crosslinking of Benzenetricarboxamide-Phenylboronate Conjugates.

In an effort to augment the function of supramolecular biomaterials, recent efforts have explored the creation of hybrid materials that couple supramolecular and covalent components. Here, the benzenetricarboxamide (BTA) supramolecular polymer motif is modified to present a phenylboronic acid (PBA) in order to promote the crosslinking of 1D BTA stacks by PBA-diol dynamic-covalent bonds through the addition of a multi-arm diol-bearing crosslinker. Interestingly, the combination of these two motifs serves to frustrate the resulting assembly process, yielding hydrogels with worse mechanical properties than those prepared without the multi-arm diol crosslinker. Both systems with and without the crosslinker do, however, respond to the presence of a physiological level of glucose with a reduction in their mechanical integrity; repulsive electrostatic interactions in the BTA stacks occur in both cases upon glucose binding, with added competition from glucose with PBA-diol bonds amplifying glucose response in the hybrid material. Accordingly, the present results point to an unexpected outcome of reduced hydrogel mechanics, yet increased glucose response, when two disparate dynamic motifs of BTA supramolecular polymerization and PBA-diol crosslinking are combined, offering a vision for future preparation of glucose-responsive supramolecular biomaterials.

Ultrasound-Directed Symmetry Breaking and Spin Filtering of Supramolecular Assemblies from only Achiral Building Blocks.

Herein we describe the self-assembly of an achiral molecule into macroscopic helicity as well as the emergent chiral-selective spin-filtering effect. It was found that a benzene-1,3,5-tricarboxamide (BTA) motif with an aminopyridine group in each arm could coordinate with AgI and self-assemble into nanospheres. Upon sonication, symmetry breaking occurred and the nanospheres transferred into helical nanofibers with strong CD signals. Although the sign of the CD signals appeared randomly, it could be controlled by using the as-made chiral assemblies as a seed. Furthermore, it was found that the charge transport of the helical nanofibers was highly selective with a spin-polarization transport of up to 45 %, although the chiral nanofibers are composed exclusively from achiral building blocks. This work demonstrates symmetry breaking under sonication and the chiral-selective spin-filtering effect.

Ultrasound‐Directed Symmetry Breaking and Spin Filtering of Supramolecular Assemblies from only Achiral Building Blocks

AbstractHerein we describe the self‐assembly of an achiral molecule into macroscopic helicity as well as the emergent chiral‐selective spin‐filtering effect. It was found that a benzene‐1,3,5‐tricarboxamide (BTA) motif with an aminopyridine group in each arm could coordinate with AgI and self‐assemble into nanospheres. Upon sonication, symmetry breaking occurred and the nanospheres transferred into helical nanofibers with strong CD signals. Although the sign of the CD signals appeared randomly, it could be controlled by using the as‐made chiral assemblies as a seed. Furthermore, it was found that the charge transport of the helical nanofibers was highly selective with a spin‐polarization transport of up to 45 %, although the chiral nanofibers are composed exclusively from achiral building blocks. This work demonstrates symmetry breaking under sonication and the chiral‐selective spin‐filtering effect.

Introducing carbohydrate patterning in mannose-decorated supramolecular assemblies and hydrogels.

Benzene-1,3,5-tricarboxamide (BTA) glyco-monomers containing one, two or three mannose units are synthesized and formulated into differently patterned supramolecular glycopolymers through homo-assembly or co-assembly with non-functionalized BTAs. Unfortunately, no cellular activity could be detected. Excitingly, these glyco-BTA monomers could be formulated into hydrogels, paving the way for (immune) cell culture.

Micelle and Nanotape Formation of Benzene Tricarboxamide Analogues with Selective Cancer Cell Cytotoxicity.

Analogues of benzene-1,3,5-tricarboxamide bearing combinations of different alkyl chains (dodecyl to octadecyl) and ester-linked PEG (polyethylene glycol) chains are shown to self-assemble into either micelles or nanotapes in aqueous solution, depending on the architecture (number of alkyl vs PEG chains). The cytotoxicity to cells is selectively greater for breast cancer cells than fibroblast controls in a dose-dependent manner. The compounds show strong stability, retaining their self-assembled structures at low pH (relevant to acidic tumor conditions) and in buffer and cell culture media.

Light Modulated Reversible "On-Off" Transformation of Arylazoheteroarene Based Discotics in Nematic Organization.

Three benzene-1,3,5-tricarboxamide (BTA) core-based molecular systems appended with phenylazo-3,5-dimethylisoxazole photoswitches at the peripheral position through variable-length alkoxy chains have been designed and synthesized. The supramolecular interactions of the mesogens provided discotic nematic liquid crystalline assembly as confirmed by polarized optical microscopy (POM) and X-ray diffraction (XRD) studies. Spectroscopic studies confirmed the reversible photoswitching and excellent thermal stability of the photoswitched states in solution phase and thin film. Also, atomic force microscopic (AFM) and POM investigations demonstrated the morphological changes in the self-assembly induced by the photoirradiation as monitored by the changes in the height profiles and optical appearance of the textures, respectively. Remarkably, the liquid crystalline discotic molecules showed reversible "on and off states" controlled by light at ambient temperature.

Dimeric capsule vs columnar polymer: Structural factors determining the aggregation behavior of amino acid functionalized benzene-1,3,5-tricarboxamides in solution and in the solid-state

The non-covalent aggregation of four benzene-1,3,5-tricarboxamide (BTA) derivatives formed from glycine or l-valine esters (-Me, -iPr), has been investigated in the solid-state and in chloroform solution by means of several analytical methods (NMR, FT-IR, and single crystal XRD). Two types of self-assembled structures were characterized: a dimeric capsule formed by –NH···OC- (ester) bonding and a columnar assembly with characteristic –NH···OC- (amide) bonds (alongside with monomers). In-depth solid-state studies revealed the significant role of the steric bulk of the C-terminus protecting group in supramolecular aggregation in the solid-state. Increasing the bulk of the ester group prevents the molecule from assembling into a columnar structure and instead a dimeric assembly is observed. On the other hand, it has no effect in chloroform solution, where the amino acid sidechain determines the self-assembly outcome. Our study points out the essential influence of substituent steric bulk in both positions: the alpha atom of the amino acid ester and in the ester group itself. Systematic study of these structurally similar molecules also allows identification of the moiety having the greater influence on the nature and stability of BTA aggregates in distinct phases (bulk, solution).