Soil Behavior Research Articles

Geotechnical Characterization of the Magdalena River Subsoil in Magangué, Colombia: A Study Using CPTu and SPT Tests

This study employs Cone Penetration Tests (CPTu) and Standard Penetration Tests (SPT) to analyze the geotechnical properties of the Magdalena River’s riverbed and banks. While these methods are standard in soil characterization, this research innovatively combines CPTu’s continuous profiling with SPT’s localized sampling to develop a nuanced stratigraphic model of the subsurface. This integrated approach provides a comprehensive view of the soil conditions, which is crucial for understanding sediment variability and stability along the riverbanks. The findings from this methodological integration enhance our ability to predict soil behavior under dynamic riverine conditions, offering valuable insights for erosion control and sustainable river management. The study underscores the practical benefits of synergizing traditional testing methods to address geotechnical challenges in river environments.

Three-Dimensional Site Response Analysis of Clay Soil Considering the Effects of Soil Behavior and Type

To understand changes in bedrock motion at the ground surface, frequency effects, and spatial distribution within the soil, it is important to look at how a site responds to earthquakes. This is important for soil–structure interaction in structural and geotechnical earthquake engineering. This study deals with the effect of classifying clays according to shear wave velocity (stiff/medium/soft) and nonlinearity in behavior (linear/nonlinear) on the analysis of the site response. A 3D soil model with a combination of free fields and quiet boundaries and advanced constitutive models for soil to obtain accurate results was used to conduct this study. A strong TABAS earthquake was used to excite the compliant base of the model after converting the velocity record of TABAS to an equivalent surface traction force using a horizontal force–time history proportional to the velocity–time history. This study reveals that the site response analysis is affected by the type of clay soil and the soil material behavior, with soft clay soil causing higher PGV and PGV values in the linear case and lower values in the nonlinear case due to soil yielding, which causes soil response attenuation. This results in extremely conservative and expensive building designs when linear soil behavior is adopted. On the other hand, the applied earthquake exhibits greater attenuation at longer frequencies and greater amplification at mid and short frequencies. However, at frequencies near the applied earthquake frequency, neither attenuation nor amplification occurs. Furthermore, nonlinear soil behavior is crucial for soil evaluation and foundation design due to higher octahedral shear strain and settlement values, especially in softer soils, resulting from extensive plastic deformation.

Computed tomography-driven analysis of particle breakage using a coupled FDM–DEM approach

This study proposes a refined approach for simulating the mechanical behavior of soils under high stress by integrating the finite difference method–discrete element method (FDM–DEM) with in situ experiment. This novel framework incorporates advanced technologies such as flexible membrane and X-ray computed tomography (CT) to enhance the predictive capabilities of the simulation with physical insight. The FDM–DEM model adeptly simulates irregular particle shapes, capturing their interactions and the dynamics of particle breakage. The use of flexible membrane within the model further enriches this approach by enabling the capture of deformation responses in granular materials during shearing. Moreover, the adoption of CT technology facilitates continuous optimization of the simulation process. Validation through in situ experiments has confirmed the model’s effectiveness. The ability of the model to predict areas of high stress concentration—and their correlation with observed particle breakage patterns—underscores the utility of the enhanced FDM–DEM framework as a robust predictive tool for understanding the behavior of granular materials under shearing.

Impact of Vertical Vibration on Group Piles During Earthquake Loading: Experimental Findings

This study presents novel research on the impact of vertical vibration on the dynamic response of pile groups embedded in stratified soil under seismic loading conditions. An experimental setup was employed wherein the piled machine foundation was subjected to vertical vibrations at three operating frequencies (10, 20, and 30 Hz) and subsequently exposed to four levels of seismic acceleration (0.1 g, 0.34 g, 0.77 g, and 0.82 g). Piles with a length-to-diameter ratio of 25 were embedded in a stratified soil profile, with an upper loose layer (30% relative density) and a lower dense layer (80% relative density) acting as end-bearing. Measurements and analyses of horizontal and vertical accelerations, and amplification factors were conducted using the Fast Fourier Transform (FFT), spectral acceleration (Sa), and variation of acceleration with depth. The results demonstrated a significant reduction in horizontal acceleration, with a peak ground acceleration (PGA) reduction of up to 64% in average, particularly at higher frequencies such as 30 Hz. The mitigation efficiency at 30Hz improved with increasing PGA, showing reductions of 42, 68, 75, and 63% for seismic accelerations of 0.1 g, 0.34 g, 0.77 g, and 0.82 g, respectively. The analysis further revealed harmonic resonance and higher mode effects at lower frequencies, with nonlinear soil behavior affecting the resonance and amplification patterns. Additionally, the results demonstrate that the far-field accelerations exceeded the near-field accelerations within the pile group, particularly in the surface layer. The results indicated that the initial vibration amplitudes exceeded the safe operating limits outlined in ACI 351.3R-18 under seismic loading, particularly at higher seismic acceleration levels and lower frequencies. Additional modified charts were presented to account for these conditions. The results presented promising evidence for using vertical vibrations as an earthquake-mitigation strategy. However, avoiding operating at frequencies less than 10 Hz is recommended because of the potential resonance and interaction with horizontal accelerations during earthquakes. Doi: 10.28991/CEJ-SP2024-010-010 Full Text: PDF

The Coefficient of Earth Pressure at Rest K0 of Sands up to Very High Stresses

The mechanical behaviour of soils subjected to any stress path in which deviatoric stresses are present is heavily characterised by non-linearity, irreversibility and is strongly dependent on the initial state of stress. The latter, for the majority of geotechnical applications, is normally determined by the at-rest earth pressure coefficient K0, even though this state is valid, strictly speaking, for axisymmetric conditions and for zero-lateral deformations only. Many expressions are available in the literature for the determination of this coefficient for cohesive and granular materials both for normal consolidated and over-consolidated conditions. These relations are available for low to medium stress levels. Results of an extensive experimental investigation on two sands of different mineralogy up to very high stress (120 MPa) are reported in the paper. For reach very high vertical stresses, a special oedometer has been realised. In the loading phase (normal consolidated sands), the coefficient K0n depends on the stress level. It passes from values of about 0.8 to values of about 0.45 in the range of effective vertical stress σ′v = 0.5–4 MPa. Subsequently, K0n is about constant and varies between 0.45 to 0.55 up to very high vertical effective stresses (120 MPa). For the sands employed in the tests, Jaki’s relation did not lead to reliable results at relatively low pressures, while at high pressures, the same relationship seems to lead to reliable predictions if it refers to the constant volume angle of shear strength. For the over-consolidated sands, K0C strongly depends on the OCR, and for very high values of OCR, K0C could be greater than Rankine’s passive coefficient of earth pressure, Kp. This result is due to the very locked structure of the sands caused by the grain crushing, with intergranular contact of sutured and sigmoidal, concavo-convex and inter-penetrating type, that confer to the sand a sort of apparent cohesion and make it similar to weak sandstone.

Dynamic Behavior of Rubber Fiber-Reinforced Expansive Soil under Repeated Freeze–Thaw Cycles

Large volumes of waste tires are generated due to the rapid growth of the transportation industry. An effective method of recycling waste tires is needed. Using rubber from tires to improve problematic soils has become a research topic. In this paper, the dynamic response of rubber fiber-reinforced expansive soil under freeze–thaw cycles is investigated. Dynamic triaxial tests were carried out on rubber fiber-reinforced expansive soil subjected to freeze–thaw cycles. The results showed that with the increase in the number of freeze–thaw cycles, the dynamic stress amplitude and dynamic elastic modulus of rubber fiber-reinforced expansive soils first decrease and then increase, and the damping ratio first increases and then decreases, all of which reach the turning point at the 6th freeze–thaw cycle. The dynamic stress amplitude and dynamic elastic modulus decreased by 59.4% and 52.2%, respectively, while the damping ratio increased by 99.8% at the 6th freeze–thaw cycle. The linear visco-elastic model was employed to describe the hysteretic curve of rubber fiber-reinforced expansive soil. The elastic modulus of the linear elastic element and the viscosity coefficient of the linear viscous element first decrease and then increase with the increase in the number of freeze–thaw cycles; all reach the minimum value at the 6th freeze–thaw cycle. The dynamic stress–dynamic strain curve calculation method is established based on the hyperbolic model and linear visco-elastic model, and the verification shows that the effect is better. The research findings provide guidance for the improvement of expansive soil in seasonally frozen regions.

Experiments on sound propagation in forests

Sound propagation in forests poses challenges due to complex factors like ground effects and tree reflections. Limited data on forest sound propagation and bark impedance limit the development of accurate acoustic models. This research addresses this issue by characterizing bark absorption through laboratory measurements and by studying in-situ sound propagation in a well-documented forest. Objectives include understanding the acoustic behaviours of forest soils and barks, exploring the relevance of existing impedance models, and characterizing sound propagation in wooded areas. The methodology is based on Kundt's tube measurements for bark absorption and on a defined protocol for forest sound propagation, including in-situ soil impedance measurements. Results will finally enrich reference databases dedicated to, eco-acoustic and soundscape research and will more generally contribute to a better comprehension of sound propagation in forests.

Derivation of site-specific soil-water characteristic curve (SWCC) from extremely sparse experimental data by hierarchical Bayesian method with consideration of geotechnical sites similarity

Soil-water characteristic curves (SWCCs) play a crucial role in understanding soil behavior related to water movement and soil moisture effects, rendering them an essential tool in engineering geology and geotechnical engineering applications. Traditionally, SWCCs are determined through labor-intensive laboratory experiments involving varying levels of suction, a process that can take several months. Moreover, obtaining a high-quality SWCC from numerous measurements becomes particularly challenging when immediate site-specific data are required for design and analysis. This paper introduces a hierarchical Bayesian method for deriving site-specific SWCCs by integrating extremely sparse data (e.g., one or two measurements) for the site of interest with existing data from sites with similar geological and sedimentary characteristics. The SWCC parameters are estimated using a Bayesian framework and Markov chain Monte Carlo simulations. This approach not only enables the derivation of accurate SWCCs but also helps quantify the associated uncertainties. The effectiveness of the proposed method is demonstrated using both numerical and real-world data from different types of loess and unsaturated soils in the unsaturated soil database (UNSODA). The results show that site-specific SWCCs of unsaturated soils can be accurately estimated from sparse measurements by incorporating information from similar sites. This work offers an efficient and reasonably accurate approach for deriving SWCCs of unsaturated soils for geotechnical applications, especially when the number of site-specific SWCC measurement is extremely sparse and limited.

Application of Gum Arabic on the Geotechnical Properties of Subgrade Materials

This study investigates the impact of Gum Arabic on the geotechnical properties of subgrade soil materials, a non-traditional soil stabilization technique. Given the need for sustainable and locally available alternatives in road construction, the study aims to assess how different percentages of Gum Arabic affect the physical and mechanical behavior of soil. The research aims to provide sustainable and locally available alternatives in road construction. Three soil samples were treated with varying percentages of Gum Arabic, (1.5%, 3%, 6% and 12%), and standard geotechnical tests were conducted under both soaked and unsoaked conditions. The results showed that the average natural moisture content of the soils was 7.9%, 2.2%, and 4.6%. The addition of Gum Arabic increased the peak maximum dry density of the soil samples by 8.02%, 1.88, and 7.88%. The maximum unsoaked California Bearing Ratio (CBR) values of soil samples were 32.1%, 81.7%, and 48.7%, respectively. Whereas, maximum soaked CBR values of soils S1, S2 and S3 obtained at 1.5%, 6% and 1.5% additions of gum Arabic were 8.4%, 28.7% and 16.9% respectively. The study recommends using 3% Gum Arabic to improve the CBR property of soil samples. The application of Gum Arabic showed significant improvements in soil behavior under both soaked and unsoaked conditions.

Sustainable soil stabilization using industrial waste ash: Enhancing expansive clay properties

This study investigates the use of various industrial waste materials—silica fume (SF), cement kiln dust (CKD), calcium carbide residue (CCR), rice husk ash (RHA), and ground granulated blast furnace slag (GGBS)—as eco-friendly stabilizers for expansive clay soil (ECS). Laboratory tests were conducted to assess the impact of different proportions (3 %, 6 %, and 9 %) of these additives on the soil's physical, mechanical, and microstructural properties. Results indicated that the inclusion of industrial waste significantly improved the soil's behavior, with notable reductions in liquid limit (up to 37.66 %), plasticity index (up to 74.76 %), and swell potential. Additionally, unconfined compressive strength (UCS) and shear strength increased substantially, with UCS values rising from 114.64 kPa to 1582.91 kPa at 30 days of curing for 9 % GGBS. Microstructural analyses confirmed the formation of cementitious compounds, which enhanced soil particle bonding and durability. These findings suggest that industrial waste materials can serve as effective and sustainable alternatives to traditional soil stabilizers, offering both performance improvements and environmental benefits.

Mechanical Behavior of Natural Granite Residual Soil in Simple Shear

Mechanical Behavior of Natural Granite Residual Soil in Simple Shear

Calibration of the UBC3D-PLM soil model from Dilatometer Marchetti Test (DMT) for the liquefaction behaviour and cyclic resistance ratio (CRR) of sandy soils

Seismic liquefaction is one of the most devastating natural hazards that can cause significant damage to structures and infrastructure. The liquefaction behaviour is simulated in the finite element code PLAXIS by the UBC3D-PLM constitutive model that is 3-D generalized formulation of the 2-D UBCSAND model developed at the University of British Colombia. The UBC3D-PLM model used in this work was successfully employed in many recent studies, e.g. to evaluate the liquefaction effects on the seismic soil–structure interaction, to assess the dynamic behaviour of earthen embankments built on liquefiable soil and to investigate the seismic performance of offshore foundations. Moreover, UBC3D-PLM model involves many input parameters to model the onset of the liquefaction phenomenon. Therefore, their determination becomes a crucial concern. Previous studies elaborated a specific formulation that requires the corrected Standard Penetration Test (SPT) blow counts as input. However, the Dilatometer Marchetti Test (DMT), compared to the SPT, is more sensitive to several factors that affect the liquefaction resistance such as aging, stress history, overconsolidation and horizontal earth pressure. For this reason, a new parameter selection procedure, which uses the horizontal stress index derived from DMT, was developed in this study.The new relationships were applied for determining the initial parameters of the UBC3D-PLM model to describe the behavior of several liquefiable deposits located in eastern Sicily (Italy) that experienced destructive earthquakes in the past. For each site, the model was calibrated to the DMT-based liquefaction triggering curve, developed by combining DMT correlations with the current method based on SPT test, by the simulation of cyclic direct simple shear tests (CDSS). Finally, CDSS tests were performed by means of the CDSS device at the Soil Dynamics and Geotechnical Engineering Laboratory of the University “Kore” of Enna (Italy). This allowed to validate the applicability of the proposed procedure in simulating the liquefaction behavior of sandy soils.

Laboratory assessment of the effect of rice husk, groundnut shells and RHA on the shear, permeability and consolidation of clayey sands

Utilizing waste materials to improve soil properties can result in cost savings and environmental benefits. This study aims to determine the effect of adding agricultural wastes like rice husk ash (RHA), rice husk (RH), and groundnut shells (GS) to clayey sands from Mysore district, India. The study focused on the undrained strength, permeability and volume change behaviour of soils mixed with RHA, RH and GS. The soil samples were mixed with varying amounts of RHA (5%, 10%, 15%, and 20%) and RH-GS (1%, 2%, 3%, 4%, and 5%) and cured for 1, 7, 14 and 21 days. These blended specimens were then used to determine the maximum dry density (MDD), optimum moisture content (OMC) and unconfined compressive strength (UCS). The soil mixture containing 5% RHA and 4% (RH + GS) yielded optimal results in the UCS test. Further tests, including unconsolidated undrained (UU) triaxial, permeability and consolidation tests, were conducted on the parent soil and the soil composite with 5% RHA and 4% (RH + GS). From the undrained test, the strength increased for the soil admixture, with a reduction in the cohesion and an increment in the friction angle, compared to that of the parent soil. The experimental results also showed improvement in the permeability and consolidation characteristics of the blended soil. As RH, GS, and RHA are abundant and considered to be agricultural waste products, using them represents an innovative, sustainable, and cost-effective solution with promising potential for soil improvement.

Undrained shear mechanical behaviors of dense gassy sand

Shallow gas can cause many disasters, and it is reported in many marine engineering constructions. For this, it is imperative to understand the impact of gas on the mechanical behaviors of soil. This study investigated the influence of undrained triaxial compression tests on dense gassy sand commonly encountered in coastal areas. Triaxial tests were performed on specimens with saturations of 100%, 99.8%, 95.9%, and 92.7% under confining pressures of 50 kPa and 200 kPa by a self-developed multi-purpose integrated triaxial apparatus (MITA) for gassy soil. The results are presented in terms of monotonic stress‒strain behavior, volumetric behavior, shear strength, and excess pore water pressure (EPWP). The occurrence of gas bubbles has different effects on loose and dense sands, augmenting the undrained shear strength of loose sand while concurrently diminishing that of dense sand. The deviatoric stress of dense sand increases during shear shrinkage, which is similar to the characteristics of loose sand under the influence of gas bubbles. However, following sand dilation, the effect of gas bubbles on deviatoric stress manifests in an antithetical manner. With elevated gas content, the shear strength of dense sand decreases, accompanied by a deceleration in the development of EPWP and a notable increase in volumetric changes. To this end, a microscopic explanation concerning the deformation and evolution of gas bubbles within sand during the shear process was presented to reveal the macroscopic laws governing the undrained shear attributes of dense gassy sand.

Mechanical Behavior of Soils Polluted by Olive Mill Wastewater – Case Bouladhieb Evaporation Pond Site, Sfax, Tunisia

Mechanical Behavior of Soils Polluted by Olive Mill Wastewater – Case Bouladhieb Evaporation Pond Site, Sfax, Tunisia

Prediction of thermal conductivity of frozen soils from basic soil properties using ensemble learning methods

Thermal conductivity is one of the important properties required for understanding the frozen soils behavior. There are several models available in the literature for the prediction of thermal conductivity of frozen soils based on the proportions of unfrozen water, ice, gas, and soil particles. In this study, two ensemble learning methods-based models; namely, the Random Forest (RF) model and the Least Squares Boosting (LSB) model, are extended to estimate the thermal conductivity of frozen soils. These models utilize basic soil properties as input parameters that include water content, dry density, temperature, and fractions of gravel, sand, silt, and clay, can be measured easily, or determined. Additionally, seven widely used thermal conductivity models, referred to as the traditional models for frozen soils, were evaluated. Both the RF and LSB models, as well as the traditional models, were assessed using data of 823 tests derived from 43 soils with different textures that were gathered from the literature. The results highlight that the traditional models have their strengths and limitations in terms of their use for different types of soils. In contrast, the proposed ensemble learning methods-based models provide higher prediction accuracy compared to the traditional models and can be applied to all soil types and temperature ranges. Furthermore, estimation from the ensemble learning methods-based models can be used to provide probability of multi-dimensional analysis of frozen soils.

Rate effects of cylindrical cavity expansion in fine-grained soil

Soil responds to cavity expansion is inherently rate-dependent, especially in the case of fine-grained soils. To better understand such rate effects, self-boring pressuremeter tests were conducted on Kunming peaty soil within a strain rate range of 0.1%/min to 5.0%/min. The results showed a clear dependence of cavity pressure and excess pore pressure (EPP) on strain rates—both increased with higher rates for a given radial displacement. In light of the experimental results, three cases of cylindrical cavity expansion were investigated using the finite element method and analytical method, partially drained expansion in Modified Cam-Clay (MCC) soil, and undrained and partially drained expansion in elastoviscoplastic (EVP) soil. The EVP behavior was and modeled using the MCC model and the overstress viscoplastic theory. The results indicated that over the strain rate range of 0.0001%/min and 50%/min, the rate response of cavity pressure for the case of partially drained expansion in MCC soil (permeability coefficient ranging from 5×10-6 m/s to 2.5×10-11 m/s) is not obvious, while the EPP response during undrained expansion in EVP soil shows rate-independent. Only the partially drained solution for cavity expansion in EVP soil captured the rate-sensitive responses of both cavity pressure and EPP, confirmed by the pressuremeter tests on the Kunming peaty soil, Saint-Herblain clay, and Burswood clay. This suggests that the rate effect results from a combination of drainage-related and time-dependent soil behavior. Parametric studies further demonstrated that both viscous behavior and the overconsolidation ratio significantly influence cylindrical cavity expansion response, and the drainage conditions during expansion can be assessed using a nondimensional velocity.

Predicting unsaturated soil strength of coarse-grained soils for mobility assessments

Accurately estimating surficial soil moisture and strength is integral to determining vehicle mobility and is especially important over large spatial extents at fine resolutions. While methods exist to estimate soil strength across landscapes, they are empirical and rely on class average soil behavior. The Strength of Surficial Soils (STRESS) model was developed to estimate moisture-variable soil strength with a physics-based approach. However, there is a lack of field data from a diverse landscape to evaluate the STRESS model. To test the STRESS model, a field study was conducted in northern Colorado. Soil moisture and strength were measured on 10 dates. Data from the surficial layer (0–5 cm) were used to test the STRESS model and determine if soil strength trends could be estimated from topographical and soil textural differences. High variability was observed in soil strength measurements stemming from fine-scale terrain features and user variability. Observations show lower soil strengths for greater soil moistures, steeper slopes, higher vegetation, and lower soil fines content. STRESS estimated rating cone index values with a mean relative error of 37.5 %, while a pre-existing model had a mean relative error of 47.4 %. The STRESS model outperforms the current RCI prediction method, but uncertainty remains large.

Shear characteristics of nonuniform distribution of granular materials in ring shear test and impact on landslides

Knowledge of the shear behavior of landslide soil is very important for understanding landslide dynamics. This study investigated the shear behavior of base soil particle materials using ring shear tests with glass beads. Samples with varying particle sizes and distributions were examined to explore how particle size affects shear behavior at different shear velocities. Analysis of the samples included assessment of shear stress, displacement-shear stress fluctuations, and changes in the shear stress standard deviation. Results showed that with increasing shear displacement, shear stress fluctuations stabilize. Rather large difference particle size differences lead to more uniform particle mixing and a lower shear stress standard deviation. Conversely, when smaller particles predominate, particle mixing is less uniform, resulting in a higher shear stress standard deviation. Additionally, this study discussed the shear dilation and compaction mechanisms of samples under large displacement shear.

INJECTION OF TWO-COMPONENT GEOPUR RESIN FOR STRENGTHENING SANDY SOILS

The article explores the use of GEOPUR, a two-component polyurethane resin, for strengthening sandy soils. It highlights the process of soil stabilization through high-pressure grouting, which improves water resistance, stabilizes soil structures, and enhances anchoring strength. The research investigates the application of this resin in consolidating weak, loose soils and its effect on their physical and mechanical properties. Laboratory experiments were conducted on sand samples to simulate real-world conditions, testing the resin's effectiveness in improving soil density, compressive strength, and overall stability. The study analyzes how the resin's expansion within the soil structure impacts soil behavior, concluding that the GEOPUR resin significantly enhances the soil's load-bearing capacity. Various parameters, such as the volume of injected resin, consolidation efficiency, and the strength-density relationship, are evaluated to provide practical recommendations for soil stabilization using this innovative material. The findings demonstrate the resin's potential in geotechnical applications, particularly in situations where traditional stabilization methods are not feasible or efficient. The article concludes with suggestions for optimizing the resin injection process to maximize its effectiveness in both laboratory and field conditions, making it a promising solution for future ground improvement projects.