Behavior Of Asphalt Mixtures Research Articles

Exploring mechanical properties and cracking behavior of AC-13 and OGFC-16 aggregate-segregated asphalt mixtures

Aggregate segregation compromises the homogeneity of asphalt pavement, which diminishes the road performance of the asphalt mixture. The segregation behavior and damage mechanism of asphalt mixture are complex. To investigate the mechanical properties and cracking behavior of asphalt mixtures with varying degrees of aggregate segregation, the dense-graded asphalt mixture with the nominal maximum size of 13.2mm (AC-13) and Open Graded Friction Course with the nominal maximum size of 16.0mm (OGFC-16) with varying degrees of segregation were designed. Indirect tensile test and the digital image correlation (DIC) technology was employed to analyze the strain distribution and strain evolution at the crack initiation point within the asphalt mixtures. The parameters were also proposed to evaluate the resistance to cracking for the segregated asphalt mixtures at a mesoscopic scale. The results show that increased segregation of coarse aggregates in AC-13 mixtures leads to decreased indirect tensile strength, lower maximum tensile strain along the horizontal direction (E11), and reduced failure displacement. Conversely, segregation of fine aggregates in OGFC-16 mixtures results in increased tensile strength, maximum strain, and failure displacement. Higher amount of coarse aggregates in the asphalt mixture contributes to a more intricate strain distribution and a greater number of strain peaks. Dense-graded mixtures show larger strain concentration zones prior to cracking, while smaller stress concentration zones are observed in open-graded mixtures. The horizontal strain-time curve displays distinct stages of stable growth, rapid growth, and rapid decline. Aggregate segregation results in more intricate crack patterns with larger inclination angles, influenced by the random distribution and shapes of coarse aggregates. Novel indexes such as strain uniformity (P1,2) and strain density during crack development (DW) effectively evaluate mesoscopic cracking resistance of asphalt mixtures. The results offer valuable insights into cracking behavior and improve evaluation methods for the mechanical performance of aggregate-segregated asphalt mixtures.

Investigation of fracture performance of asphalt mixtures considering size effect law and equivalent crack propagation law

The integration of the Size Effect Law (SEL) and the equivalent Linear Elastic Fracture Mechanics (LEFM) in characterizing the fracture behavior of asphalt mixtures has received limited attention. This study presents a preliminary exploration into the application of equivalent LEFM on the fracture characteristics of two asphalt mixtures, AC10 and AC16, accounting for variations in specimen size. Semi-circular Bending (SCB) tests were conducted on specimens with four different diameters (D = 76 mm, 100 mm, 125 mm, and 150 mm) and three notch-to-radius ratios (α = 0.2, 0.4, and 0.6) at a temperature of −10 °C. The equivalent crack propagation (ECP) length, crack growth resistance, and the size of the Fracture Process Zone (FPZ) were determined and subjected to analysis. The findings revealed a size effect on the ECP length, crack growth resistance, and FPZ size, with an increase in specimen size leading to a corresponding increase in these parameters. Conversely, an increase in α resulted in a decrease in all three types of data. A power law relationship was established between the ECP length and crack growth resistance. It was observed that AC16 demonstrated superior fracture resistance compared to AC10, particularly in terms of crack growth resistance. The initial notch length, ECP length, and FPZ size were found to be of the same order of magnitude, suggesting that the equivalent LEFM can produce more accurate fracture results under low temperatures than the traditional LEFM.

Frequency Range Optimization for Linear Viscoelastic Characterization of Burger's Model

The linear viscoelastic behavior of materials is represented using mechanical models of choice, which are further utilized in different numerical investigations, such as finite element simulations and discrete element simulations. Burger's model is one of the widely adopted mechanical models and remains highly favored in contemporary research due to its multiple advantages. Specifically, it excels in representing long-term creep and stress relaxation behavior in a relatively simplified manner. Accurate identification of the long-term behavior for the viscoelastic material, particularly asphalt concrete, is crucial, as it serves as a key indicator of asphalt pavement performance over its service life. However, past research studies show that the parameters of Burger's model should be back-calculated from experimental data only within a limited range of frequency, otherwise, the parameters fail to represent the true material behavior. To the best of the authors’ knowledge, there is no approach for researchers to obtain the critical frequency range in which the experiments should be performed. Therefore, this study proposes a novel framework to find the critical frequency range to obtain appropriate model parameters of Burger's model, to better characterize the viscoelastic behavior of the materials. To examine the framework, asphalt concrete mixtures are used as examples in this study. Necessary laboratory tests including complex modulus tests and stress relaxation tests, are performed on two distinctive types of asphalt concrete mixtures. The generalized Maxwell model with different number of Maxwell chains are used to evaluate the performance of Burger's model. Furthermore, since commercially available finite element packages generally do not have a direct built-in Burger's model, the article shows a way of implementing Burger's model in finite element simulation. The simulations corresponding to the laboratory tests are carried out in both frequency domain and time domain to thoroughly evaluate the performance of Burger's model. The optimal frequency range of 0.1-20 Hz for the examined mixtures is found to significantly improve the accuracy of the descriptive master curve. The results also suggest that the generalized Maxwell model requires a minimum of four Maxwell chains to maintain good performance in accurately characterizing the behavior of asphalt mixtures. However, adding more Maxwell chains beyond a critical limit may not provide significant benefits. Finite element simulations demonstrate that the stress relaxation behavior predicted by the obtained Burger's model parameters aligns more closely with experimental data over longer time intervals. This makes Burger's model a strong choice for aiding in the design of simulations for studies focused on the long-term behavior of materials.

Influence of direct coal liquefaction residue (DCLR) on the rutting behavior of asphalt mixture with the discrete element method

The research explores the influence of direct coal liquefaction residue (DCLR) as a fine aggregate on the rutting behavior of asphalt mixtures (AMs). Four AMs were prepared and modeled, namely AM (AM-0), AM with 2.36 mm DCLR (AM-2.36), AM with 1.18 mm DCLR (AM-1.18), and AM with 0.6 mm DCLR (AM-0.6). Firstly, the rutting depth and uplift height of AMs were analyzed. Results indicated that the rutting depth and uplift height of AMs increased with rising temperatures and loads. The order of rutting depth and uplift height of AMs at different temperatures and loads was: AM-0＞AM-2.36＞AM-1.18＞AM-0.6. This suggests that DCLR replacing fine aggregates improved the high-temperature performance of AMs, and DCLR replacing 0.6 mm fine aggregate was the best alternative. Moreover, the influence mechanism of DCLR on the rutting behavior was investigated by the force chain distribution and particle movement. The results showed that the rutting deformation was caused by the movement of 0.6–2.36 mm particles. Compared with AM-0, the chain distribution of AM-2.36 was uniform and sparse, and the movement of 0.6–2.36 mm particles in AM-2.36 was small. This was due to the composite modification effect of DCLR within the AM, which increased the bonding degree of asphalt mastics. This enhancement improved connectivity between aggregates, strengthened their load transfer capacity, and raised the AM's overall self-organizing adaptability. Finally, it was also found that DCLR as fine aggregates served dual roles within the AM, acting both as a skeleton and a filler.

Evaluation of the Mechanical Behavior of Asphaltic Mixtures Utilizing Waste of the Processing of Iron Ore

Mineral extraction is an important operation for the economy of different countries and generates millions of tons of mining waste. In this context, and in association with the high demand for paving aggregates and the lack of raw materials for this purpose, the feasibility of using iron ore processing waste has emerged as a promising alternative. This study evaluates the physical and mechanical behavior of asphalt mixtures incorporating waste from the company Samarco S.A., collected in Mariana-MG, to replace the fine aggregate in asphalt concrete mixtures, with a view to applications in the bearing layer of local traffic roads. Two mixtures, M2 and M3, containing 20% and 17% waste, respectively, were formulated and analyzed, compared to a reference mixture, M1. Evaluations were carried out using the Marshall method parameters, mechanical tests of resilience modulus, and fatigue life under controlled tension, as well as mechanistic analysis. Brazilian mechanistic–empirical design software (MeDiNa—v 1.5.0) contributed to this analysis. This analysis revealed that, for a traffic level of N = 5 × 106 (average traffic) on a local road, pavements containing the M1 and M3 mixtures had the same layer thicknesses (6.9 cm), as well as the same fatigue class, equal to 1. The pavement with the M2 mixture had the thickest asphalt layer (8.2 cm) and a lower fatigue class equal to 0. But if compared in terms of the percentage of cracked area over 10 years, it still offers ideal performance conditions compared to the M1 and M3 mixes. Thus, it can be considered feasible to replace fine aggregate with iron ore waste in asphalt concrete for use on local roads in the region without altering the bearing capacity of the pavement.

Evaluation on tension-compression anisotropic behavior of recycled asphalt mixture

The utilization of recycled asphalt pavement (RAP) is the effective way to improve resource conservation and reduce energy consumption. The asphalt mixture is a kind of typical anisotropic pavement materials due to its heterogeneity in composition and microstructure. This could lead to the differences of mechanical response between the tensile and compressive direction. However, there are limited researches to study the effect of RAP on the tension-compression anisotropic behavior of asphalt mixture. The strength, modulus and fatigue resistance tests are carried out and different loading modes are adopted. The results show that the tension-compression anisotropic behavior is more prominent with the increase of RAP content. The regenerant served as a kind of typical additive could alleviate this effect. In addition, the result of dynamic modulus test shows that the tension-compression anisotropic behavior has an increasing trend with the decrease of frequency and the increment of temperature. The ranking of fatigue life is opposite for the direct tensile and compressive loading mode, and the fatigue life ratio of compression to tension also show positive relation with the RAP content. Due to the difference in the stress mode, the fatigue life between the indirect tensile loading and four-point bending loading also show opposite trend, and the indirect tensile fatigue life has a larger discreteness.

Research on Design Parameters for Fatigue Performance of Asphalt Mixtures.

The fatigue performance of the asphalt mixture was the main focus of this study, with five typical factors-phase angle, cumulative dissipated energy, failure strain, failure stiffness modulus, and strain rate-identified as potential design indexes. The effect of asphalt content on the parameters under different gradation and stress ratios was tested. It was observed that the selected parameters exhibited varying levels of sensitivity and relevance to the fatigue behavior of asphalt mixtures under cyclic loads. By comparison, the strain rate proved sensitive to the asphalt content and independent of the other parameters, namely aggregate gradations and stress ratio, thus establishing the strain rate as a critical design index based on fatigue performance. On this basis, a design method based on the fatigue performance for the asphalt mixtures is herein proposed. It was confirmed that the asphalt mixture formulated using the proposed method exhibited enhanced fatigue endurance compared to those designed using the conventional method.

Preliminary Study on Multi-Scale Modeling of Asphalt Materials: Evaluation of Material Behavior through an RVE-Based Approach

This study employs a microstructure-based finite element modeling approach to understand the mechanical behavior of asphalt mixtures across different length scales. Specifically, this work aims to develop a multi-scale modeling approach employing representative volume elements (RVEs) of optimal size; this is a key issue in asphalt modeling for high-fidelity fracture modeling of heterogeneous asphalt mixtures. To determine the optimal RVE size, a convergence analysis of homogenized elastic properties is conducted using two types of RVEs, one made with polydisperse spherical inclusions, and another made with polydisperse truncated cylindrical inclusions, each aligned with the American Association of State Highway and Transportation Official’s maximum density gradation curve for a 12.5 mm Nominal Maximum Aggregate Size (NMAS). The minimum RVE lengths for this NMAS were found to be in the range of 32–34 mm. After the optimal RVE size for each inclusion shape is obtained, computational models of heterogeneous Indirect Tensile Asphalt Cracking Test samples are then generated. These models include the components of viscoelastic mastic, linear elastic aggregates, and cohesive zone modeling to simulate the rate-dependent failure evolution from micro- to macro-cracking. Examination of load-displacement responses at multiple loading rates shows that both heterogeneous models replicate experimentally measured data satisfactorily. Through micro- and macro-level analyses, this study enhances our understanding of the composition-performance relationships in asphalt pavement materials. The procedure proposed in this study allows us to identify the optimal RVE sizes that preserve computational efficiency without significantly compromising their ability to capture the asphalt material behavior under specific operational conditions.

Fracture properties of asphalt mixtures containing high content of reclaimed asphalt pavement (RAP) and eco-friendly PET additive at low temperature

Low-temperature cracking is one of the main types of distress that affects asphalt pavement performance over its service life. At the same time, the accumulation of plastics, especially polyethylene terephthalate (PET), and the potentially harmful effects of these plastics requires special attention in order to find ways to reduce them. Previous studies have paid less attention to the impact of PET on low-temperature cracking in asphalt mixtures and the simultaneous interaction between PET and reclaimed asphalt pavement materials (RAP) on fracture behavior of asphalt mixture. In this study, a value-added substance called PET Additive (PA), which is extracted from chemical processing of PET was blended with asphalt binder at different dosages (1–3 %) to use in the mixture of hot mix asphalt (HMA). Reclaimed Asphalt Pavement (RAP) was also added to the HMA mixtures at rates of 25 and 50 % by aggregate mass and the resulting asphalt mixtures were tested to characterize the load carrying ability and cracking resistance indexes of the modified HMA mixtures. Circular shaped test specimens with different mixture types and different geometries were manufactured. Results showed that the asphalt mixture containing PA has better performance than the control mixture; among all mixture types, a mixture containing 2 % PA and 25 % RAP had the better fracture resistance at low temperatures. Finally, the results demonstrate that the fracture behavior in Edge Notch Disc Bend (ENDB) and Semi-Circular Bend (SCB) specimens had similar trends.

Using the indirect tensile fatigue test to evaluate fatigue characterisation of asphalt mixtures

Fatigue cracking is a principal structural failure mode in asphalt pavement layers, resulting from repeatedtraffic-induced loading stresses. Therefore, understanding fatigue deterioration behaviour is crucial for ensuring effective pavement design. In recent years, the indirect tensile fatigue test has become one of the mostcommonly used methods for evaluating the fatigue behaviour of asphalt mixtures, owing to its simplicity andsuitability for cylindrical specimens either produced in the laboratory or cored from pavement constructionsites. In this research paper, the indirect tensile fatigue test was employed to assess the stiffness modulus andfatigue behaviour of one unmodified asphalt mixture (DBM50) and two polymer-modified mixtures (EME2and SMA) in stress-controlled mode across various temperatures. The results indicated that the indirect tensile fatigue test worked well and it can be considered to characterise effectively fatigue behaviour of differentasphalt mixtures in Vietnam. In addition, the test results revealed that the SMA mixtures exhibited the bestperformance at both 20 °C and 10 °C compared to other mixtures. Specially, the fatigue lines for DBM50 andSMA at 20 °C were positioned above those at 10 °C, while the fatigue lines for EME2 lines remained quitesimilar across both temperature levels.

Impact of specimen size on mixed mode I and II fracture behavior of asphalt mixture using MMTS criterion

This study investigates how the diameter of specimens impacts the cracking behavior of asphalt mixtures. Testing was conducted on SCB specimens with diameters of 64, 86, and 150 mm under different fracture modes and temperatures. Fracture toughness and fracture energy, crucial fracture parameters, were determined for the tested specimens. The findings revealed that an increase in Me (mode mixity) values led to a decrease in fracture toughness but an increase in fracture energy. By considering all specimen sizes and test temperatures, the fracture toughness for mixed mode I/II and pure mode II was, on average, 13 % and 29 % lower than that for pure mode I loading, respectively. Conversely, the fracture energy for mixed mode I/II and pure mode II was, on average, 19 % and 38 % higher than that for pure mode I loading, respectively. Larger specimens exhibited enhancements in both fracture toughness and fracture energy. Considering all loading modes and test temperatures, the fracture toughness for specimen diameters of 86 mm and 150 mm was, on average, 9 % and 26 % higher than that for a diameter of 64 mm, respectively. The corresponding improvements in fracture energy were 8 % and 14 %, respectively. Additionally, it was observed that fracture toughness increased with decreasing temperature until −20 °C, after which it declined. On the other hand, fracture energy rose with increasing test temperature for all specimen sizes and mode mixities, with a notable increase at 10 °C due to the brittle nature of asphalt concrete. Moreover, the size of the fracture zone (rc) was influenced by temperature and specimen size (R), with larger R resulting in an increase in rc. However, a decrease in temperature initially caused a slight decrease in rc followed by an increase. The study concluded that the MMTS (modified maximum tangential stress) criterion effectively predicted the fracture behavior of SCB specimens across various sizes and loading modes, providing accurate estimations for asphalt mixture fracture behavior. By considering all loading modes and test temperatures, the average error values were 5.9 %, 6.2 %, and 6.5 % for specimen diameters of 64 mm, 86 mm, and 150 mm, respectively.

Mechanistic Pavement Modeling of Typical Brazilian Pavements: Cohesive Zone Fracture Modeling and Continuum Damage Modeling

Pavement performance evaluation with respect to fatigue cracking has seen a major shift toward more rigorous mechanistic models that can capture the complex damage response of the mixtures more accurately. This study utilized two mechanistic methods (cohesive zone [CZ]-based fracture modeling and continuum damage [CD] modeling) to study the cracking behavior of asphalt mixtures and subsequently predict the damage-associated performance of pavements. A Superpave mixture designed for Brazilian highway conditions was selected to evaluate the two modeling approaches for the performance of the mixture when utilized as a surface course within typical Brazilian highway pavements. The mixture was first evaluated for its linear viscoelastic properties, and then the damage characteristics of the mixture were obtained through two different experiments: the semi-circular bending (SCB) beam test and the cyclic fatigue (CF) test. The SCB tests performed at different loading rates were used to obtain the model parameters of the nonlinear viscoelastic CZ model with a Gaussian damage evolution criterion, while the CF tests were performed at different strain amplitudes, and the mixture-specific damage characteristic curve and the fatigue failure criterion were obtained using the simplified-viscoelastic continuum damage model. From a design perspective, three pavement structures that varied in geometry (pavement layer thickness) and underlying layer properties were selected while retaining the same asphalt mixture. The three pavement scenarios were evaluated for the fatigue cracking performance from each of the mechanistic modeling methods. The results indicate that both methods rank the performance of the pavement structures in a similar manner, while the damage initiation and progression were seen to be different because of the different mechanics in modeling cracks.

Incremental Viscoelastic Damage Contact Models for Asphalt Mixture Fracture Assessment

Asphalt mixtures are widely used as a surfacing material for pavements due to their several advantages. For this reason, robust numerical models still need to be developed to improve the understanding of their fracture behaviour. Recently, an incremental generalised Kelvin (GK) contact model that relates increments in contact displacements with increments in contact forces was proposed to assess the viscoelastic behaviour of asphalt mixtures within a discrete element method (DEM) framework. In this work, the contact model is extended to allow its application to asphalt mixture fracture studies. Two damage models—a brittle and a bilinear softening—coupled with the GK contact model are proposed to consider damage initiation and propagation. A parametric study is presented that assesses the impact of the GK-Damage parameters, showing a sensitivity to the loading velocity and the Maxwell elements, particularly its viscosity element, on the stress–strain response of a single contact. A reduced-size numerical mastic is initially used to speed up the calibration process of the GK-Damage contact parameters, with subsequent validation on a specimen with real experimental dimensions. It is shown that the proposed calibrated damage models can successfully reproduce the time-dependent behaviour, peak stress, and crack path observed in experimental results, highlighting the benefits of the adopted methodology. For the GK-Bilinear model, the fracture energy and maximum contact tensile stress are shown to adjust both the peak stress and softening response. Uniaxial tensile tests on asphalt mixtures indicate that the GK-Bilinear model provides a more realistic characterisation of fracture development. A higher susceptibility to damage at aggregate-to-mastic contacts compared to contacts within the mastic phase is identified.

Micro-scale investigation on aggregate skeleton behavior of asphalt mixture: Mechanism and monitoring

Micro-scale investigation on aggregate skeleton behavior of asphalt mixture: Mechanism and monitoring

RUTTING IN ASPHALT MIXTURES – A REVIEW

Vehicles that pass over a pavement structure induce load and unload cycles that generate recoverable (resilient) and permanent (plastic) deformations within layers. Pavement has been developing studies since the decade of the 60´s with the purpose of attempting to understand the visco-elasto-plastic behavior of asphalt mixtures. This has the purpose of evaluating and understanding how the main damage mechanisms that are sought to be controlled in flexible pavement design methods are generated. One of the main damage mechanisms for these types of pavements is rutting. Based on the reviewed literature in relation to the phenomenon of rutting in asphalt mixtures, this article depicts and describes in summary, the main variables that influence the generation of said phenomenon in pavement. The end of the article presents the evolution of equations developed through theoretical and experimental studies in order to attempt to predict the phenomenon of rutting.

Characterization of cracking-healing cycle of asphalt mixture based on air-coupled second harmonic measurement using Duffing-van der pol oscillator

Second harmonic generation (SHG) technique using Rayleigh surface wave has been successfully attempted for the non-destruction evaluation of asphalt mixture during the self-healing process. The air-coupled transducer placement is desirable for the convenient implementation of SHG for the large-scale detection. Nevertheless, the pronounced attenuation of ultrasonic wave by air-coupled propagation will cause the second harmonic induced by microcracks to be barely detectable, particularly under the influence of inevitable noise. In this study, a novel approach by combining Duffing oscillator and van der pol equation is developed to identify and quantify the second harmonic in noise-contained signals based on the phase trajectory and periodic trajectory area exponent. The multi-physics finite element model is first established to simulate the air-asphalt propagation of Rayleigh waves, and proof-of-concept numerical simulations are carried out to estimate the second harmonic amplitude of noise-contaminated signals. The air-coupled SHG experiments are conducted, and the approach of the Duffing-van der pol oscillator is applied to extract the second harmonic in experimental data, and the self-healing behavior of asphalt mixture is analyzed through the variation of the nonlinear parameter of SHG measurements. The results indicate that the contactless SHG method combined with the Duffing-van der pol oscillator can effectively realize the convenient and reliable estimation of the nonlinear ultrasonic signal during the cycle of asphalt deterioration and healing, which is important for the property characterization of asphalt mixture considering its high attenuation to the ultrasonic waves.

Asphalt Mix Compressive Stress-Strain Behavior: An Analytical and Experimental Study of Variable Influence

To address the excessive depletion of natural resources in Indonesia's civil construction sector, there's a rising trend in utilizing plastic waste from packaging, such as beverage bottles and plastic bags, alongside renewable energy sources like Modified Buton Asphalt (MBA). MBA serves as a partial substitute for both fine and coarse natural aggregates and non-renewable energy sources like petroleum bitumen. This study aimed to investigate the effects of incorporating polyethylene terephthalate (PET) and polypropylene (PP) waste as partial substitutes for coarse and fine aggregates through experiments and t-tests. The objective was to determine how the stress-strain behavior of asphalt mixtures formed using MBA changed with the addition of this mixture. Additionally, compressive strength and elastic modulus were calculated under mixed compressive loads. PET and PP plastic waste replaced natural coarse and fine aggregates at three volume percentages: 1%, 2%, and 3%, with a PET:PP ratio of 50%. A manual grater was used to shred PET and PP plastic bottles into shredded plastic waste, which was retained in sieve no. 50 after sieving. The study found that adding PET, PP plastic, and MBA waste enhanced the asphalt mixture's mechanical strength and modified relevant variables, resulting in a more elastic and ductile behavior. Doi: 10.28991/CEJ-2024-010-05-011 Full Text: PDF

A Review of the Studies on the Effect of Different Additives on the Fatigue Behavior of Asphalt Mixtures

The fatigue phenomenon significantly weakens road pavement due to repeated reloading. To enhance fatigue resistance, numerous studies have explored various additives in asphalt mixtures. This review focuses on key variables influencing the effectiveness of additives, including fibers, polymers, nanomaterials, waste materials, and biomaterials, in improving the fatigue performance of asphalt mixtures. The study initially identifies different additives and fatigue testing methods used for asphalt mixtures. It evaluates the impact of factors such as modifier content and size, base asphalt binder type, mixing processes, dispersion behavior, and testing conditions on the fatigue behavior of modified asphalt mixtures. The cost-effectiveness and environmental impact of additive application have also been assessed. Additionally, research gaps and future prospects for modified asphalt mixes are outlined. Existing studies demonstrate the benefits of additives like basalt fiber, polyester fiber, styrene–butadiene–styrene (SBS), nanosilica, crumb rubber, and biooils in enhancing the fatigue life of pavement constructions. However, challenges exist in the application of modifiers due to limited practical implications and insufficient knowledge. Further research is needed on factors such as additives’ dispersity, compatibility, aging resistance, economic viability, and modifying mechanisms in morphological and micromechanical aspects to enhance the fatigue performance of the modified asphalt mixture.

Influence of Thermoplastic Polyurethane on the Properties of Asphalt Cement and the Elastic Behavior of Asphalt Mixtures

The useful life of pavements determines the design of asphalt mixtures. However, premature structural failures and low durability are one of the main problems in pavement engineering today. The action of loads produced by traffic, exposure to environmental factors and the inadequacy of conventional designs of asphalt pavements are some of the main problems associated with the durability of the pavement. The modification of asphalt binders is an alternative that has been used for some years to improve the properties of bituminous material. Among the modifying materials are elastomers, a class of polymers with elastic properties that can be heat-treated. In this study, the asphalt was modified by wet means by adding 5, 10 and 15% of Thermoplastic Polyurethane (TPU) by weight of the binder. Subsequently, standard samples were prepared with the characterized constituents and mixtures with the modified asphalt cement. Consequently, tests were carried out to obtain the optimal mixture that improves the properties of conventional pavement. The results show that the optimal TPU addition content is 5%. With this percentage, the modified binder presented a greater elastic recovery of up to 5.60% and a reduction of up to 42.6% in penetration compared to conventional asphalt. In addition, using the Marshall method, it was determined that the stability of the modified mixtures was much higher than that of standard mixtures for light, medium and heavy traffic; so, they will have a higher resistance to deformation and better fatigue behavior.

Investigating the Dynamic Creep and the Tensile Performance of Zeolitic Tuff-modified Warm Asphalt Mixtures

Aims This research investigates the effect of adding natural Jordanian Zeolitic tuffs to the SUPERPAVE asphalt mixture at the dynamic creep and the indirect tensile performance. Background Rutting and fatigue are considered the most common types of distress that affect pavements all over the world. Many factors can affect these properties, such as different aggregate properties, asphalt grades, and properties, as well as the type and amount of the mineral filler. Mineral fillers play an important role in enhancing the asphalt mixtures' performance by filling the voids in the mixture besides improving the cohesion of the binder as it has a small weight in addition to a very large surface area. Generally, the powder of limestone is the most used type of filler. However, studies showed that many materials could also be used as mineral fillers successfully. The focus of this study is using natural Jordanian Zeolitic tuff as a mineral filler. Jordanian zeolitic tuff mainly consists of Phillipsite, chabazite, and faujasite, which are considered the most abundant Zeolitic tuff minerals. The pyroclastic material is widely distributed in the Badia region of northeast Jordan. Zeolitic tuffs are located in Jabal Aritayn (30km northeast of Azraq), Tlul AlShahba (20 km east of Al Safawi), Tal Al-Rimah (35 km northeast of Al Mafraq), and other small deposits in central and south Jordan. Objectives The aim of this research was to study the impact of Zeolitic tuffs on overall Superpave asphalt mixture performance. Methods The specimens were prepared using the optimum asphalt content obtained by the SUPERPAVE method. Dynamic Testing System DTS-16 was used to apply both dynamic creep and indirect tensile tests that give a good idea about the rutting and fatigue behavior of asphalt mixtures. Both tests were conducted at 25 °C. Results The Zeolitic tuffs modified asphalt mixtures have lower accumulated strains and higher creep stiffness compared to the control mixture. Subsequently, the indirect tensile test results showed that the modified asphalt mixtures have a higher resilient modulus than the control asphalt mix. Generally, using Zeolitic tuffs as a modifier of asphalt mixtures enhanced the rutting and fatigue resistance. The results showed that asphalt mixtures fortified with 25% Zeolitic tuffs emerged as the best contenders for rutting resistance. Also, mixtures enriched with 50% Zeolitic tuffs stood out in fatigue resistance performance. Conclusion The best dynamic creep performance was by adding 25% Zeolitic tuffs by the mineral filler mass, while the best resilient modulus was by adding 50% Zeolitic tuffs by the mineral filler mass. Other The overarching goals encompass understanding the dynamic creep behavior of Zeolitic tuff-infused asphalt blends, deciphering its indirect tensile performance, pinpointing the ideal replacement ratio for mineral fillers, and drawing a performance comparison between WMA and conventional Hot Mix Asphalt (HMA) compositions.