Basal Unit Research Articles

Interplay between tectonics and surface processes in the evolution of mountain ranges: Insights from landscape dynamics, uplift, and active deformation of Talesh Mountains (NW Iranian Plateau margin)

Drainage divides are dynamic features of a landscape that migrate over time during the development of river networks. In this study, we focused on the geomorphic response of a landscape to the interaction among tectonics, climate, and lithology in the Talesh Mts. along the northwest of the Iranian Plateau. The footprints of these competing forces have been analyzed by divide stability analysis and applying χ, χQ, and Gilbert metrics. Additionally, we examined the effects of bedrock erodibility on landscape evolution processes by measuring the mechanical rock strength of the lithological units in different sectors of the mountain range. The distribution of the χ values suggests a disequilibrium of the drainage networks across the whole main divide and its tendency to migrate towards the interior of the plateau. In contrast, Gilbert metrics, which focuses on a narrow topographic zone across the divide, suggest that the uppermost divide in the northern and southern Talesh Mts. is stable. Moreover, asymmetry in Gilbert metrics across the central part of the range suggests that the divide might be migrating towards the plateau interior. The possible scenario for the whole divide's behavior is associated with the contrasting erosion rates across the divide. In the northern and southern sectors of the Talesh Mts. range, the erosional wave related to the most recent uplift pulses has not reached the divide yet. Mechanism of topographic rejuvenation is controlled by heterogeneous uplift of strong bedrock units in the northern and southern sectors, and weak bedrock units outcropping in the central sector, initiated topographic rejuvenation largely in the central Talesh Mts. Parallelly, the precipitation has a limited effect in assisting and magnifying the divide mobility, reorganization, and landscape transience. In general, we can infer that divide is in a transient state due to the spatially varying rock uplift and bedrock erodibility.

Aspidella and water escape structures from the ca 850 Ma (Tonian) Heavitree Formation, Amadeus Basin, Central Australia

The mid-Tonian-aged Heavitree Formation, the basal unit of the Amadeus Basin succession, has long been believed to be devoid of metazoan fossils. Since a recent review of isolated occurrences of purported metazoan traces and remains within the formation’s upper unit, however, that conclusion has been questioned and led to the identification of new fossil remains, including imprints of Aspidella reported herein. Previously, organic-looking structures encountered in rocks older than mid-Ediacaran (ca 580 Ma) were commonly interpreted as originating inorganically, primarily through water escape, but a recently examined outcrop of the upper unit of the Heavitree Formation revealed a variety of water escape structures in association with, but structurally distinct from, a suite of organic impressions.

Eastern Continental Divide Origin in the Blacksburg, Virginia Area Determined by Topographic Map Interpretation, USA

Published geology literature addresses only a small fraction of the Blacksburg, Virginia region topographic map drainage divide evidence. This situation probably arises because the accepted geology and glacial history paradigm (accepted paradigm) does not explain most topographic map drainage divide evidence (anywhere). A new and fundamentally different geology and glacial history paradigm (new paradigm) which appears to explain most topographic map drainage divide evidence sees the Eastern Continental Divide in the Blacksburg area as being located along the rim of a continental ice sheet created and occupied deep “hole” with the rim being uplifted as immense and prolonged southwest-oriented meltwater floods flowed across the region. From the new paradigm perspective northwest-oriented New River valley headward erosion into the rising deep “hole” rim (from the deep “hole”) upon reaching the Blacksburg region beheaded and reversed southwest-oriented floodwaters (probably aided by deep “hole” rim uplift) to create today’s northeast- and northwest-oriented New River. Headward erosion of the southeast-oriented Roanoke River valley and subsequently the southeast-oriented James River valley (both from the Atlantic Ocean) then created the Roanoke River-New River and James River-New River drainage divides (both are Eastern Continental Divide segments) and the James River-Roanoke River drainage divide by beheading and reversing southwest-oriented floodwaters which had been flowing in diverging and converging channels (which had been eroded headward in northeast directions along less resistant bedrock units from the New River valley). This scenario explains most through valleys (valleys crossed by drainage divides), barbed tributaries, river direction changes, and water gaps seen on Blacksburg area detailed topographic maps and does not see significant changes taking place since the southwest-oriented floods ended. The accepted and new paradigms are incommensurable which according to Thomas Kuhn means one paradigm should not be used to judge the other.

Evaluation of geological structures and geothermal resources in the North Tanzania Volcanic area using remote sensing and gravity data analysis

Problems Statement and Purpose. Northern Tanzania Volcanic terrain has been a subject of evaluation for geothermal potential in the last four decades. The region is characterized by Neogene to Recent volcanic and tectonic activities. This preliminary study based on remote sensing, water chemistry, gravity data, geological structures and volcanic centers distribution reports the geothermal manifestations identified and discusses the implications on geothermal fluid pathways. Oxygen-hydrogen isotope data from water samples indicate that there were involved in the hydrothermal system. Tectono-Volcanic Structures. The Northern Tanzania Divergence (NTD) area characterized by Neogene to Recent volcanic and tectonic activities. Recent volcanic and tectonic activities are ash cone and lava dome eruption at the floor of Meru crater a century ago, dyke intrusion and volcanic eruption south of Gelai volcano, and Oldoinyo-Lengai volcano, respectively. Fumarolic activities and hot springs are dominant in a relatively young volcanic area to the north-eastern and northern part of the NTD. Data and Methods. Shuttle Radar Topography Mission (SRTM), Landsat 8 Operational Land Imager (OLI) image, water isotope analysis and gravity data were used to extract and analyze the surface and subsurface geological lineaments and map the hydrothermal alteration zones in the study area. The hydrothermal alteration is used to evaluate and identify the permeable structures. Analysis and interpretation of the length and trends of extracted lineaments were used to investigate the tectonic evolution. Geological map of a study area was digitized from the existing geological maps and the age of rocks to delineate volcanic activity and associated lineaments based on the age of the lithological domain. Digital image processing was applied to enhance the visual interpretation. Gravity data were used to give insight into the subsurface structure in the study area. Results and Discussion. The higher δ 18O values and large deviation from meteoric water lines suggest that is due to the interaction of fluids with host rocks at elevated temperatures. These are consistent with open structures that act as conduits for fluid flow. The potential field gravity data reveal a basin-like structure trending in the NNW direction. The gravity data show that the basement units gradually deepen towards the central part and that it is controlled by two main fault systems that trend N-S and NW-SE respectively. The gravity data presented here provides new constraints on the tectonic evolution and geothermal resources of the study area.

Zircon U-Pb-Hf isotope systematics of southern Black Forest gneiss units (Germany) – Implications for the pre-Variscan evolution of Central Europe

Presently, little is known about depositional ages, geological setting, and provenance of (meta)sedimentary rocks constituting the southern part of the Black Forest Gneiss Complex, preventing detailed reconstructions of the Cadomian to Variscan geodynamic evolution in Europe. Here, we present the first systematic U-Pb-Hf isotope data of detrital zircon grains combined with geochemical data of metasedimentary rocks from the Murgtal, Todtmoos, and Wiese-Wehra gneiss units, preserving different stages of the pre-, syn- and post-Cadomian evolution. Protoliths of Murgtal metagreywackes were deposited during the Ediacaran at <550 Ma and sourced from the Avalonian-Cadomian Belt (550–700 Ma; ∼70 %) and Africa (760–1045 Ma, 1850–2250 Ma, 2720–3230 Ma; ∼30 %). In contrast, metasedimentary rocks of the Wiese-Wehra and Todtmoos gneiss units show late Devonian depositional ages at <375 Ma, but in different geotectonic settings. Data from Wiese-Wehra metagreywackes provide evidence for the existence of a pre-Cadomian oceanic arc formed at 610 Ma (εHft = +5 to +8), accreted to the Avalonian-Cadomian Belt at ca. 540 Ma, and successively reworked until 380 Ma (εHft = +1 to +6). Finally, these rocks became part of an early Variscan arc-back arc system with juvenile input at ca. 375 Ma (εHft = 0 to +10). Todtmoos metaarkoses mainly reflect subduction-related magmatism at 420–490 Ma (∼88 %), and at 380 Ma (∼10 %) in a continental arc setting (εHft = −2 to −8), and rare Cadomian arc input (560–700 Ma; εHft = −10 to +3; ∼2 %). Zircon grains of some samples reveal a Variscan metamorphic overprint at 340–335 Ma. In combination, new and existing data from the Black Forest and other basement units throughout Europe provide evidence for the amalgamation of pre-Cadomian juvenile terranes along the northern margin of Gondwana until 540 Ma, followed by a complex rift history, accompanied by subduction between 500 and 400 Ma. Furthermore, they indicate the existence of an oceanic arc-back arc system, which was located south of the Armorican Terrane Assemblage at 380–350 Ma, immediately prior to Variscan subduction-accretion at <345 Ma.

Reference seismic crustal model of the Dinarides

Abstract. Continental collision zones are structurally one of the most heterogeneous areas intermixing various different units within a relatively small space. A good example of this is the Dinarides, a mountain chain situated in the central Mediterranean, where thick carbonates cover older crystalline basement units and remnants of subducted oceanic crust. This is further complicated by the highly variable crustal thickness ranging from 20 to almost 50 km. In terms of spatial extension, this area is relatively small but covers tectonically differentiated domains making, any seismic or geological analysis complex, with significant challenges in areas that lack seismic information on crustal structure. Presently there is no comprehensive 3D crustal model of the Dinarides (and surrounding areas). Using the compilations of previous studies and employing kriging interpolation, we created a vertically and laterally varying crustal model defined on a regular grid for the wider area of the Dinarides, also covering parts of Adriatic Sea and the SW part of the Pannonian Basin. The model is divided by three interfaces, Neogene deposit bottom, carbonate rock complex bottom and Moho discontinuity, with seismic velocities (P and S waves) and density defined at each grid point. To validate the newly derived model, we calculated travel times for an earthquake recorded on several seismic stations in the Dinarides area. The calculated travel times show significant improvement when compared to the simple 1D model used for routine earthquake location in Croatia. The model derived in this work represents the first step towards improving our knowledge of the crustal structure in the complex area of the Dinarides. We hope that the newly assembled model will be useful for all forthcoming studies (e.g., as a starting model for seismic tomography, as a model for earthquake simulations) which require knowledge of the crustal structure.

The Boipeba member in the Jatobá Rift (northeastern Brazil): Occurrence, facies characterization and palaeoenvironmental implications

Fluvio-aeolian and lacustrine depositional systems are commonly associated with the initial sedimentary processes in rift-type basins, typically indicative of relatively calm tectonic settings. Fluvio-aeolian sandstones from the Boipeba Member of the Aliança Formation have been documented in well-drilled samples from the Recôncavo and Tucano basins, with thicknesses decreasing progressively from south to north. These units constitute the Brotas Group, encompassing deposits from the Jurassic period (Dom João local Brazilian stage). However, due to the absence of any records within the Jatobá Basin up until now, its occurrence in this basin remains uncertain. Based on facies analysis and depositional architectural elements, the fluvio-aeolian system of the Boipeba Member can be categorized into four associations (1) medium to low energy fluvial channels, (2) floodplains, (3) dunes and (4) sand sheets. Palaeocurrent data have indicated a variable paleoflow direction ranging from SW and NW, which is expected for the rift-onset phase fluvial system. Within the broader context of the Recôncavo-Tucano-Jatobá Rift System (RTJ), five distinct fluvial and/or aeolian units can be identified: the Tacaratu Formation (Syneclisis), the Boipeba Member (the basal unit of the Aliança Formation), the Sergi Formation (Early Rift), the São Sebastião Formation (Rift), and the Marizal Formation (Post-Rift). The Boipeba Member is the first unit of the Early Rift Sequence in the RTJ, deposited in a fluvio-aeolian environment until it evolves to the exclusively lacustrine deposition of the Capianga Member (the upper unit of the Aliança Formation). The subsequent recurrence of the fluvio-aeolian cycle is evident in the Sergi Formation. Faciological and petrographic analyses of outcrops in drainage channels in the Tacaratu municipality, located in the southeastern part of the Jatobá Basin, were performed. The rock formations appear as whitish-gray sandstones, typically thin to medium, subrounded, and consistently sorted. Some samples exhibit clay matrix and contain feldspars. Notably, the presence of planar cross-stratifications and a distinct upper contact with sediments of lacustrine origin provide diagnostic features indicating the Boipeba Member. Based on the facies, depositional system and palaeocurrent analyses, the deposits of the Boipeba Member in the Jatobá Basin were interpreted as resulting from fluvial channel sedimentation, followed by subsequent aeolian reworking. This process transitioned gradually to a lacustrine infilling, exemplified by the Capianga Member. Therefore, the Aliança Formation within the Jatobá Basin signifies the complete deposition of a fluvio-aeolian and lacustrine system, exhibiting both of its members, as observed in the other basins of the RTJ.

Geochemistry and zircon U–Pb dating of amphibolite in the Menderes Massif (western Türkiye): first record of Late Devonian extension

ABSTRACT The timing of extensional events in northern Gondwana remains elusive. In relations to this event, a new zircon U-Pb age and Hf isotopic compositions, and whole-rock geochemistry provided here for the amphibolites in the basement unit of the Menderes Massif (MM) within the Anatolide-Tauride Block (ATB). LA-ICP-MS U-Pb zircon dating of one sample yielded a crystallization age of 367.0 ± 2.5 Ma, providing the first record of Late Devonian (Famennian) mafic magmatism in the Menderes Massif. This sample contains inherited zircon grains with ages spanning from 588 Ma to 541 Ma, likely sourced from late Neoproterozoic country rocks. Chondrite-normalized rare earth element patterns exhibit enrichment in light rare earth elements and flat patterns for heavy rare earth elements, suggesting affinities with tholeiitic EMORB and ocean island basalt. The geochemical data, coupled with the positive εHf(t) values ranging from 0.5 to 7.8, indicate that the amphibolite likely originated from juvenile melts generated by partial melting of the asthenospheric mantle. This melt was subsequently modified by crustal contamination and fractional crystallization. Contemporaneous EMORB- and OIB-like mafic rocks are identified in the eastern Taurides and Iran, respectively. Both regional geological and geochemical evidence proposes that Late Devonian magmatism in the Anatolide-Tauride Block occurred in a within-plate tectonic setting. This magmatic activity might have been triggered by the northward subduction of the Paleotethys beneath the Pontides during the Devonian, a process that would produce a slab-pull force, creating an extensional tectonic regime along the northern margin of Gondwana.

Corrente Canoa pluton: A less-evolved portion of the Statherian Borrachudos Suite (Guanhães basement inlier, Araçuaí orogen)

We bring new geophysical, geochemical, petrographic and geochronological data for the Corrente Canoa pluton, an igneous body within the Guanhães basement inlier, Araçuaí orogen. Our results demonstrate that this unit was crystallized in 1703.1 ± 4.3 Ma (U–Pb, LA-ICP-MS, zircons) and is part of the anorogenic Borrachudos Suite, integrating the Statherian Silicic Large Igneous Province emplaced at the São Francisco-Congo Paleocontinent in the context of an extensive rifting event. The Corrente Canoa pluton presents a distinctive geophysical and geochemical signature, which sets it apart from the other plutons in the suite. In airborne gammaspectrometry maps, its area of occurrence is depleted in Th and U. Geochemically, it presents a negative correlation between SiO2 and TiO2. Al2O3, MgO, CaO e FOt, which suggests fractionation of plagioclase, pyroxene, amphibole, biotite and Fe–Ti oxides along the crystallization process. K-feldspar and pyroxene controlled the fractional crystallization, and the latter is increased in the Corrente Canoa pluton, indicating that it is less-evolved. The difference between Eu/Eu × of the Corrente Canoa pluton (1.01 av.) and the rest of the Borrachudos Suite (0.32 av.) also attest its lower degree of fractionation. Zr saturation thermometry indicates an average crystallization temperature for the Corrente Canoa pluton of 888 °C, a result higher than the average for the rest of the Borrachudos Suite (846 °C). Altogether, these results suggest that the Corrente Canoa pluton was crystallized in a deeper portion of the crust. Based on this evidence, we argue that the genesis of the Corrente Canoa pluton and their differences to the other plutons of the Borrachudos Suite are better explained by fractional crystallization processes rather than the metasomatism suggested by previous studies. Fractional crystallization not only clarifies the distinctions between these plutons but also enhances the understanding of the entire differentiation process within the Borrachudos Suite. Additionally, we discuss possible explanations for the juxtaposition of the Current Canoa and Morro do Urubu plutons, based on their differences in age and petrogenesis. The distinct characteristics of the Corrente Canoa pluton points to the need of a thorough cartographic review in the Guanhães block, because at least part of what is now mapped as basement units might be in fact rocks of the Borrachudos Suite, but with a different geophysical and geochemical signature than usual for this suite.

Lomonosov Ridge Composite Tectono-Sedimentary Element, Arctic Ocean

Abstract The Lomonosov Ridge (LR) is a sliver of continental crust, a microcontinent that stretches across the Arctic Ocean and separates the Mesozoic Amerasia Basin from the Cenozoic Eurasia Basin. The LR is thought to have been separated from the northern Barents Sea–Kara Sea passive continental margin by continental rifting at about 56–53 Ma and the subsequent formation of the oceanic crust in the Eurasia Basin. Following the nomenclature of this volume, the sedimentary succession of the LR and nearby area forms a composite tectono-sedimentary element containing an assemblage of the following main tectono-sedimentary elements (TSEs): (1) an undefined group of pre-rift TSEs mostly composed of Mesozoic and poorly known Paleozoic successions; (2) the Cretaceous–Paleocene synrift TSE; and (3) the Eocene–Holocene post-rift TSE. The age of the LR's folded and metamorphosed basement can be inferred based on correlations to basement units of the northern Eurasian passive continental margin, which may include a variety of geological structures formed during Timanian, Caledonian, late Paleozoic and Mesozoic orogenic events. The pre-rift TSE includes the oldest and most poorly known offshore sedimentary succession in the Arctic region. The lithostratigraphic units of these basins were mainly characterized from a handful samples collected at the seafloor and by correlation with better known stratigraphy of the conjugate continental margin. The synrift TSE of Cretaceous–Paleocene age has been defined based on seismic data and samples of sedimentary rocks recovered during the Arctic Coring Expedition (ACEX), as well as from seismic facies correlation between the LR and the Podvodnikov–Makarov, Laptev and East Siberian Sea basins. The post-rift Cenozoic sedimentary record was documented by the ACEX well in the central part of the LR.

Concurrence of Late Triassic lithostratigraphic, radioisotopic, and biostratigraphic data support a Carnian age for the Popo Agie Formation (Chugwater Group), Wyoming, USA

The Upper Triassic Popo Agie Formation of the Chugwater Group of Wyoming, northeastern Utah, and northwestern Colorado has been an enigmatic unit since its definition and is commonly excluded from large-scale studies of continental Upper Triassic strata in the western USA. Lithostratigraphic correlations of Popo Agie Formation outcrops are documented from west-central Wyoming through northeastern Utah and northwestern Colorado, which demonstrates the presence of the Popo Agie Formation throughout this region. Unique detrital zircon age distributions have led previous workers to hypothesize a paleodrainage connecting basal units of the Dockum in west Texas and eastern New Mexico, USA, with the Gartra Grit, a basal unit of the Popo Agie in northeastern Utah. Biostratigraphically informative taxa such as parasuchid phytosaurs in the absence of leptosuchmorph phytosaurs support an assignment of the Gartra Grit and Popo Agie Formation to the Otischalkian estimated holochronozone. We present the first detrital zircon age distributions for the Popo Agie Formation. Multidimensional scaling analysis of zircon populations shows that the Popo Agie samples are similar to other Upper Triassic units surrounding the Ancestral Uncompahgre Highlands, Central Colorado Trough, and the Ancestral Front Range. Additionally, we present the first maximum depositional ages (youngest population) for the Popo Agie Formation at a location where the top of the ochre unit is no older than 225 ± 4 Ma, and the upper purple to ochre transition is no older than 230 ± 5 Ma. By leveraging existing biostratigraphy, regional lithostratigraphy, and new radioisotopic ages we temporally constrain the Popo Agie Formation, enabling us to integrate the upper Chugwater Group, Chinle Formation, and Dockum Group strata into a testable Late Triassic chronostratigraphic framework for the western USA. The consilience of data support a Carnian age for the majority (if not entirety) of the Popo Agie Formation, making this—and equivalent strata in the Dockum Group (i.e., Camp Springs Conglomerate, and strata of the Tecolotito and Los Esteros members of the Santa Rosa Formation)—among the oldest continental Late Triassic stratigraphic units in the western USA.

From divergent to convergent plate boundary: A ca. 200 Ma Wilson cycle recorded by ultrahigh-pressure eclogites in the Dora-Maira Massif, Western Alps

Sparse eclogite exposure in accretionary-to-collisional orogens cannot only reveal the sites of ancient subduction zones and plate boundaries, but also elucidate the multi-stage tectonic evolution in the Wilson cycle. The southern part of the Dora-Maira Massif in the Western Alps is well known for its ultrahigh-pressure (UHP) rocks and contains small occurrences of petrographically distinct types of eclogite. Due to the lack of detailed geochronological and geochemical data on these rocks, the nature of their protolith and related geodynamic setting has remained unknown. In the current study, 33 samples from 13 localities were studied by whole-rock major- and trace-element analysis, and a selection of the samples were studied using Sr-Nd-Hf isotopes, as well as high-resolution elemental mapping and U-Pb geochronology of zircon. According to macroscopic appearance, petrography, chemical composition, and principal-component analysis of multi-elements, two major types are distinguished. Light-colored eclogite is phengite-rich, commonly foliated, bears kyanite and quartz/coesite, shows relatively high MgO, K2O, SiO2, εNd(t) (−2.2 to +1.4), and εHf(t) (+3.5 to +7), with a protolith geochemically similar to an enriched-type mid-oceanic-ridge basalt (E-MORB). Dark eclogite generally is massive, rutile-rich, shows higher values of Ti, Fe, P, Nb, and Zr, εNd(t) values between −2.8 and −0.8, εHf(t) values between −6.1 and −3.2, with an oceanic island basalt (OIB)-type protolith composition. Magmatic zircon cores, which are characterized by steep heavy rare earth element (HREE) patterns and negative Eu anomalies, yield consistent protolith ages of ca. 253−252 Ma in both eclogite types. Metamorphic zircon domains with flat HREE patterns and insignificant Eu anomalies yield a younger mean age of ca. 34 Ma, which is the age commonly assigned to eclogite-facies UHP metamorphism. Considering the various geochemical signatures of E-MORB- to OIB-like eclogites and the regional tectonic evolution, their protolith is best explained as rocks, which crystallized from rift-related basaltic magma, associated with the break-up of the Pangea Supercontinent that eventually resulted in the birth of the Piemonte-Liguria Ocean (Alpine Tethys Ocean) between the future Eurasia and Adria plates. Therefore, the UHP eclogites in the Dora-Maira Massif likely fingerprint a multi-stage tectonic evolution from divergent (continental extension, rifting) to convergent (subduction zone) plate boundary, corresponding to the beginning and end of a Wilson cycle. Incidentally, they reveal that mafic rocks in the Alpine basement units may not be polymetamorphic, but may actually consist of post-Variscan products that underwent only Alpine metamorphism.

Eruption, transport mechanisms and deposition of Paleogene ignimbrites, southwestern North Patagonian Massif, Argentina

The Paleocene-Eocene Catán Lil Ignimbrite (CLI) is one of the few occurrences within the explosive acid volcanism of this age in the extra-Andean region of the North Patagonian Massif. It represents a small-scale explosive eruption covering an area of 214 km2, with an estimated volume of 1.27 km3 and consisting of three weakly-to densely welded cooling units. The maximum thickness of this sequence is 90 m. Its basal unit is the best preserved, and has allowed a lithofacial analysis that reveals different aspects of the eruption and the emplacement mode of the Catán Lil pyroclastic flows. The CLI ignimbrites are generally massive, poorly sorted, matrix-supported deposits (tuff and lapilli tuff) resulting from dense pyroclastic currents (PDCs). They are composed mainly of juvenile fragments, scarce lithoclasts and crystalloclasts, being a product of a purely magmatic fragmentation occurred at a shallow level. A pyroclastic fountaining eruptive model is interpreted, resulting from the collapse of a low eruptive column, and a rapid and high-temperature emplacement. The CLI PDCs generally respond to slow moving pyroclastic flows with low erosive energy. The morphology and stratigraphy indicate radial emissions with thicknesses decreasing towards the periphery that become evident in Central-South ignimbrites. These PDCs flowed over a planar terrain, giving rise to most of the CLI deposits (South-Central area and North- East). The Northwestern ignimbrites are deposits in the interior (south and middle part) of the Catán Lil creek, forming thick deposits within the latter valley and thin, veneer-like deposits over the flanking Lipetrén granitoids. In the North- East region, the ignimbrites show stratigraphic relationships that suggest that the PDCs would slightly postdate those of the South-Central area. The Catán Lil Ignimbrites represent the most eastern exposures of the Paleocene-Eocene Pilcaniyeu Belt, differing from the latter in that it lacks a conspicuous lava facies, and by the unimodal character and the tectonic signature of the Catán Lil sequence.

Stagnant ice and age modelling in the Dome C region, Antarctica

Abstract. The European Beyond EPICA project aims to extract a continuous ice core of up to 1.5 Ma, with a maximum age density of 20 kyr m−1 at Little Dome C (LDC). We present a 1D numerical model which calculates the age of the ice around Dome C. The model inverts for basal conditions and accounts either for melting or for a layer of stagnant ice above the bedrock. It is constrained by internal reflecting horizons traced in radargrams and dated using the EPICA Dome C (EDC) ice core age profile. We used three different radar datasets ranging from a 10 000 km2 airborne survey down to 5 km long ground-based radar transects over LDC. We find that stagnant ice exists in many places, including above the LDC relief where the new Beyond EPICA drill site (BELDC) is located. The modelled thickness of this layer of stagnant ice roughly corresponds to the thickness of the basal unit observed in one of the radar surveys and in the autonomous phase-sensitive radio-echo sounder (ApRES) dataset. At BELDC, the modelled stagnant ice thickness is 198±44 m and the modelled oldest age of ice is 1.45±0.16 Ma at a depth of 2494±30 m. This is very similar to all sites situated on the LDC relief, including that of the Million Year Ice Core project being conducted by the Australian Antarctic Division. The model was also applied to radar data in the area 10–15 km north of EDC (North Patch), where we find either a thin layer of stagnant ice (generally &lt;60 m) or a negligible melt rate (&lt;0.1 mm yr−1). The modelled maximum age at North Patch is over 2 Ma in most places, with ice at 1.5 Ma having a resolution of 9–12 kyr m−1, making it an exciting prospect for a future Oldest Ice drill site.

Characterization of an active landslide structure with integrated electrical resistivity tomography and multi‐channel analysis of surface waves methods in Değirmendere district, Sakarya (Türkiye)

AbstractLandslides following the development of slope instability can have serious consequences. Geophysical surveys have potential to aid in the understanding of landslides and their instability. This study described a landslide that occurred under particular geomorphological and meteorological conditions in Erenler (Sakarya, NW Türkiye) using electrical resistivity tomography (ERT) and multi‐channel analysis of surface waves (MASW) surveys and mechanical drillings. Data showed that the landslide is characterized by downslope movement of an altered clay unit over a claystone unit. The traditional landslide model used to interpret geoelectric data involves sliding of a relatively low‐resistivity material over higher resistivity bedrock. Here, the ERT survey showed a relatively high‐resistivity sliding material moving over relatively low‐resistivity bedrock units corresponding to the claystone unit. The relatively lower resistivity of the whole study area was related to the clay‐rich materials detected in the boreholes. This low‐resistivity unit was detected at high velocity in the MASW section, and it was understood that this layer was a compact structure acting like bedrock. The detected slip surfaces, landslide scars and slip surface toe indicate that the movement character of the landslide is retrogressive. The study results showed that the integrated and comparative use of different geophysical methods effectively reduces interpretation uncertainties and potential errors and leads to much better landslide characterization.

Precise U-Pb age models refine Neoproterozoic western Laurentian rift initiation, correlation, and Earth system changes

The upper Tonian ChUMP (Chuar-Uinta Mountains-Pahrump) strata of the southwestern U.S.A. are hypothesized to be regional correlatives and to record a time of rift basin evolution commencing at ca. 770 Ma in western Laurentia (modern-day coordinates). We test this correlation using U-Pb chemical abrasion-isotope dilution-thermal ionization mass spectrometry (CA-ID-TIMS) on detrital zircon grains from basal units within these successions. ChUMP units yield CA-ID-TIMS maximum depositional ages (MDA) between 775 and 766 Ma: the Chuar Group of AZ has an MDA of 770.1 ± 0.5 Ma (n = 1) and an additional young zircon mode at 775.7 ± 0.3 Ma (n = 11); the Uinta Mountain Group of northern UT has an MDA of 766.3 ± 0.5 Ma (n = 5) and contains a second young mode at 775.1 ± 0.7 Ma (n = 3); and the basal Horse Thief Springs Formation of the middle Pahrump Group CA has an MDA of 775.4 ± 0.7 Ma (n = 3). The ca. 775 and 770 Ma grains are interpreted to be from zircon-bearing mafic sources related to the 770–778 Ma Gunbarrel Large Igneous Province of Yukon and NW U.S.A. The 766 Ma population was either derived from the Mt Rogers complex of eastern Laurentia or could have come from conjugate margins that were in the process of rifting away, such as Tasmania.The CA-ID-TIMS dates on the Chuar Group in Grand Canyon anchor a Bayesian age model for evaluating late Tonian Earth systems. Faster sediment accumulation rates (80 + 150/-44 m/My) in the lower Chuar Group are consistent with the inception of an extensional basin related to Rodinia breakup; slower rates in the upper Chuar Group (25 + 12/-5 m/My) record are associated with relatively deeper water sedimentation and concomitant organic carbon burial during marine transgression. The model also constrains the timing of several biological events recorded in the Chuar Group, including eukaryovorous predation (>767 Ma), the first appearance of vase-shaped microfossils (∼741 Ma), and the ranges of Cerebrosphaera globosa (=C. buickii; 800–743 Ma) and Lanulatisphaera laufeldii.(766–740 Ma), both proposed as possible marine index fossils for late Tonian time. Finally, the model can also be used to search for stratigraphic evidence of a purported glaciation at ca. 751 Ma.

How can past sea level be evaluated from traces of anthropogenic layers in ancient saltpans?

Footprints of human activities identified in the sedimentary sequence of submerged historical saltpans can reveal the history of the site and can indicate the relative sea level during its operational period. Saltpans are man-made constructions used continuously for salt production in the Mediterranean at least for the last 2000 years. The east Adriatic coast contains many such submerged remains, preserved and well-dated by historical archives. Sedimentological, microfossil and geochemical analyses of the sediments from cores drilled in the saltwork area at Brbinj, Dugi Otok, Croatia, enable the reconstruction of various past environmental conditions. The current study aims to: a) identify the anthropogenic unit in the sedimentary sequence deposited over time, b) determine its age, and c) use it as past sea-level limiting points. Basal units made of terra rossa soil materials were identified in the sedimentary records. These layers are located -120 ±7 cm below mean sea level next to the separation wall and -125 ±7 cm and -135 ±7 cm, respectively, in the inner pools, most likely representing a man-made pavement. The terra rossa layer is overlaid by a unit rich in faunal remains dominated by euryhaline foraminifera and ostracod species such as Ammonia veneta and Cyprideis torosa, representing the saltworks unit. The flooding of the saltpans by the rising sea is manifested by the deposition of an upper sedimentary unit dominated by remains of marine species. The base and the top of the saltwork unit are dated by Optically Stimulated Luminescence to 1040±50 CE and to 1390±30 CE, respectively. The study presents a new approach for obtaining footprints of human activities in ancient, submerged saltpans, by identifying and dating the indicative anthropogenic layers and using these for the reconstruction of paleo sea-level. The described method can be applied all around the Mediterranean.

Geochemistry and tectonic significance of metamorphosed mafic ophiolitic rocks in the upper high-grade basement unit of the eastern Rhodope Massif (Bulgaria–Greece)

Geochemistry and tectonic significance of metamorphosed mafic ophiolitic rocks in the upper high-grade basement unit of the eastern Rhodope Massif (Bulgaria–Greece)

Basin-wide unconventional potential of the Doig Formation, Triassic of the Western Canada Sedimentary Basin

The Doig Formation is a Lower to Middle Triassic fine-grained unit of the Western Canada Sedimentary Basin, which includes a phosphate-bearing basal unit informally defined as the Doig Phosphate Zone (DPZ). The DPZ is recognized as a significant source of hydrocarbons hosted in conventional reservoirs in the basin. Phosphatic mudstones are uncommon and studies of their source-rock potential are scarce. The regional distribution of the Doig Formation source-rock properties across its entire stratigraphic and spatial range is poorly understood. In this study, we characterize the source-rock potential of the Doig Formation through an integrated assessment of thickness, organic content, kerogen type and thermal maturity. A new method for estimating the relative contribution of kerogen type and its original hydrogen index pseudo-van Krevelen, is introduced. The method assumes a binary mixture of kerogen types and requires an assumption for the initial value of immature kerogen from each end-member. The Doig Formation thickens southwestwards from the eastern erosional edge towards the deformation front to a maximum thickness of 229 m. The upper Doig and DPZ have distinct thickness distribution patterns, which suggests a transition from a tectonically-influenced sedimentation marked by uplifting, faulting and erosion, to the start of physiographic healing and a return to large-scale subsidence. The source-rock generative potential of the Doig Formation is fair to good, containing kerogen Types II and III. The DPZ has higher total organic carbon (TOC) content, of up to 12.2% and a higher proportion of Type II kerogen than that the upper Doig, where the maximum TOC content is 8.4 wt%. Original TOC was higher in the northern part of the lateral extent, which is likely related to a connection with open ocean; and in a linear trend through the center of the basin, which represents the trough of a marine fore-arc basin. Thermal maturity increases to the southwest, from early oil to dry gas windows, in a trend that approximately correlates to gas wetness and liquid yield. A zone of dry gas occurs near the eastern edge, however, which may be explained by preferential updip migration of thermogenic methane generated at greater depths, or mixing of thermogenic and biogenic gas.

Sedimentology, stratigraphy and glacial genetic model of the coromandel phosphate deposit, Vazante group, central Minas Gerais state, Brazil

The Coromandel sedimentary phosphate deposit is inserted at the external zone of the Brasília Fold Belt geological context, more specifically in the Retiro Formation, basal unit of the Vazante Group. Compared to the world-class Rocinha Formation deposits, widely studied due to high economic interest, the Coromandel Deposit is the one that most lacks studies focused on the main rocks description, faciological characterization and proposal of a plausible metallogenetic model according to the depositional environments. Thus, from the detailed field description of outcrops, geological cartography, microscopic petrography and X-ray diffraction and fluorescence analysis, it was possible to contribute to a better understanding of the deposit. The Retiro Formation is characterized by a glaciogenic facies association that comprises polymictic diamictite, conglomeratic sandstone, fine whitish arkosean, massive and laminated siltstone, besides phosphate facies, including phosphate siltstone, laminated phosphorite and brecciated phosphorite. The phosphatic facies occur in straight relation to the glaciogenic sediments and not rare directly over diamictite, which matrix can be phosphated as well. These rocks P2O5 contents range from 2% to 34% and the succession suggest an establishment of a glaciotransitional environment responsible to constrain favorable alkalinity, temperature and oxi-reduction conditions to directly chemical precipitation of fluorapatite in a mechanism analogue as the cap dolomites, supporting an idea of “cap phosphorites”. The phosphate source is related to the glacial sedimentary supply of continental origin (granite, carbonatite and other alkaline bearing rocks). In addition, the input of cold water, as result of ice melting episodes, became a limiting development factor for phosphorus metabolizing organism which improves the P2O5 system enrichment. For the unique genetic conditions, this phosphatic deposit has been called as the Coromandel Deposit Type.