Bearing Fault Research Articles

An Improved Rolling Bearing Fault Diagnosis Model of Long Short-Term Memory Network Based on VMD Denoised Vibration Signals

Data driven fault diagnosis methods are increasingly being used for condition monitoring of rotating machinery in the era of Industry 4.0. The effectiveness of Variational Mode Decomposition (VMD) denoised vibration signals in improving the Long Short-Term Memory (LSTM) method for the intelligent fault diagnosis of a rolling bearing is reported. The raw and VMD denoised vibration signals of rolling bearings are provided as inputs to the LSTM network for classification of bearing condition. The efficacy of the methodology to extract the fault information is assessed through datasets obtained from experiment test rig and through the open-source dataset of Case Western Reserve University (CWRU). A comparative analysis is also carried out using both VMD based decomposition and denoising techniques along with four machine learning classifiers viz. Decision Tree, k-Nearest Neighbour (k-NN), Support Vector Machine (SVM) and Artificial Neural Network (ANN) by using the statistical features of the VMD modes. Among the different methods evaluated, VMD denoised signals when fed to LSTM result in the maximum classification accuracy of 99.14 % with experimental dataset. For the case of CWRU dataset, VMD denoised signals as input to the SVM resulted in maximum classification accuracy of 98.16%.

Fusion-driven fault diagnosis based on adaptive tuning feature mode decomposition and synergy graph enhanced transformer for bearings under noisy conditions

Bearing fault diagnosis is critical for maintaining the reliability of health monitoring in electromechanical systems. However, traditional feature extraction methods often struggle to accurately capture fault information in complex environments. This paper proposes an adaptive tuning feature mode decomposition (ATFMD) method, based on the intrinsic signal characteristics, to effectively extract robust features. ATFMD dynamically adjusts to complex fault signals, providing more representative feature inputs and pruning redundant features induced by noise. Additionally, given the limitations of single-dimensional feature domains in fully revealing fault information, this study constructs feature topology graphs by mapping spatial phase and time–frequency characteristics, offering a comprehensive representation of fault information. To achieve complementary fusion of fault information within the feature topological graph, this paper proposes the synergy graph enhanced transformer (SGET). SGET optimizes the fusion process by reinforcing feature interactions through its synergy graph representation module. Additionally, a hierarchical cross-attention mechanism is employed to modulate attention distribution across feature dimensions, enhancing the sensitivity to critical features during fusion. Experimental validation was conducted on two distinct rotating machinery transmission systems. The results demonstrate that the proposed method maintains exceptional robustness and generalization, even in the presence of severe noise and complex fault conditions. Compared to the leading methods, including MS-DGCNs, CapsFormer, TFT, and ConvFormer, the proposed method achieves notable accuracy improvements of 8.13 %, 8.71 %, 11.94 %, and 6.25 %, respectively, under challenging conditions.

A Bearing Fault Diagnosis Method in Scenarios of Imbalanced Samples and Insufficient Labeled Samples

In practical working environments, rolling bearings are one of the components that are prone to failure. Their vibration signal samples are faced with challenges, mainly including the imbalance between normal and fault samples as well as an insufficient number of labeled samples. This study proposes a sample-expansion method based on generative adversarial networks (GANs) and a fault diagnosis method based on a transformer to solve the above issues. First, selective kernel networks (SKNets) and a genetic algorithm (GA) were introduced to construct a conditional variational autoencoder–evolutionary generative adversarial network with a selective kernel (CVAE-SKEGAN) to achieve a balance between the proportion of normal and faulty samples. Then, a semi-supervised learning–variational convolutional Swin transformer (SSL-VCST) network was built for the fault classification, specifically introducing variational attention and semi-supervised mechanisms to reduce the overfitting risk of the model and solve the problem of a shortage of labeled samples. Three typical operating conditions were designed for the multi-case applicability verification. The results show that the method proposed in this study had good application effects when solving both sample imbalances and labeled-sample deficiencies and improved the accuracy of fault diagnosis in the above scenarios.

Lightweight Bearing Fault Diagnosis Method Based on Improved Residual Network

A lightweight bearing fault detection approach based on an improved residual network is presented to solve the shortcomings of previous fault diagnostic methods, such as inadequate feature extraction and an excessive computational cost due to high model complexity. First, the raw data are turned into a time–frequency map using the continuous wavelet transform, which captures all of the signal’s time- and frequency-domain properties. Second, an improved residual network model was built, which incorporates the criss-cross attention mechanism and depth-separable convolution into the residual network structure to realize the important distinction of the extracted features and reduce computational resources while ensuring diagnostic accuracy; simultaneously, the Meta-Acon activation function was introduced to improve the network’s self-adaptive characterization ability. The study findings indicate that the suggested approach had a 99.95% accuracy rate and a floating point computational complexity of 0.53 GF. Compared with other networks, it had greater fault detection accuracy and stronger generalization ability, and it could perform high-precision fault diagnostic jobs due to its lower complexity.

Combined failure identification of intermediate bearing in aeroengine based on wavelet transform, second-order difference, and 1D-LBP

Intermediate bearing is one of key parts in double-rotor aeroengine, whose running state usually can only be monitored by casing signals. As the fault characteristic information detected from casing is weak and complex, it is generally difficult to be dug correctly. One-dimensional local binary pattern (1D-LBP) can depict failure information from the perspective of local feature extraction. Currently, the study on the application of 1D-LBP in fault identification is mostly based on original signals; due to the influence of component signals irrelevant to fault and noise, the fault information in original signals is weak and complex; besides, 1D-LBP is rather sensitive to noise, which is extremely possible to cause insufficient extraction of local textural features and the difficulty to identify a fault. To solve this problem and make it possible to precisely identify the fault of intermediate bearing of real aeroengine, the paper has proposed the combined method of wavelet transform (WT), second-order difference with 1D-LBP. WT is highly uncertain to determine the decomposition layer number. To solve the difficulty, correlation coefficient was introduced. Meanwhile, casing vibration signal was subjected to WT. Furthermore, because vibration signal often went with impact components in a bearing failure and second-order difference of signals was sensitive to impact feature, component signals obtained by WT were subjected to second-order difference operation. Additionally, taking advantage of 1D-LBP, second-order differences of signals were locally binarized with average value as criterion. Finally, 1D-LBP signals were re-transformed to decimal 1D local texture signals (1D-LTS). These 1D-LTS can embody local feature information of signals. According to the spectrum of 1D-LTS, combined failure type of intermediate bearing was identified. Through the comparison with WT and classical 1D-LBP method, and failure analysis after disassembly of aeroengine, the effectiveness and engineering applicability of proposed method have been verified.

Experimental Investigation Using Robust Deep VMD-ICA and 1D-CNN for Condition Monitoring of Roller Element Bearing

Abstract A rotor-bearing system experiences numerous vibrations during the operation that frequently degrade performance and endanger operational safety. Roller bearing failure has significant consequences, leading to downtime or even a complete outage of rotating machinery. It is crucial to detect and diagnose incipient bearing defects promptly to ensure optimal operation of the machinery and minimize potential disruptions to the process. Deep Independent Component Analysis is a necessity used in modern condition monitoring to detect bearing failure earlier than it occurs. To address this issue the feasibility of utilizing Deep Independent Component Analysis (ICA) method based on Variational Modal Decomposition (VMD) with one-dimensional convolutional neural network (1D-CNN) to diagnose incipient bearing defect. Fast Fourier Techniques are utilized to extract the vibration signatures of artificially damaged bearings on a newly built test bed. VMD addresses to minimize data noise, allowing data to decompose into various sub-datasets for extraction of incipient defect features. With weak defect characteristic signal and noise interference, the Deep VMD-ICA model and 1D-CNN simplicity improved the accuracy of diagnosis corresponding to the experimental results. Moreover, Deep VMD-ICA with 1D-CNN has additionally demonstrated strong performance in comparison to experimental results and is useful for monitoring the condition of industrial machinery. The results reveal that this fault diagnosis approach is reliable, with a diagnostic accuracy of 98.93% for bearing faults.

Hardware implementation of bearing fault diagnosis using empirical mode decomposition

ABSTRACT This paper presents a comprehensive methodology for developing a vibration measurement system, with a primary focus on monitoring rolling element bearings, widely recognised as pivotal components in generic machine vibration monitoring. Through the utilisation of sensors to capture vibration data signals, the system aims to meticulously analyse these signals to discern any indications of bearing health deterioration, thus facilitating the early identification of potential pre-breakdown conditions. The proposed system initiates the process by internally decomposing the three-axis vibration signal, enabling subsequent transmission of processed data to a remote location for the identification of specific faults in the roller element bearings. Installation of a three-axis accelerometer on the bearing housing, positioned radially, facilitates the capture of raw vibration data along one axial and two radial directions. Moreover, efforts to enhance computational efficiency involve cascading multiple identical modules in a serial pipeline structure, allowing for iterative loop computation of intrinsic mode functions within Empirical Mode Decomposition (EMD). Real-time computation is achieved through this serial pipeline structure, necessitating two distinct clock frequencies: one at 12.5 MHz for sampling and storing 3-axis vibration data in ping pong buffers, and another at 40 MHz for reading and processing the data signal retrieved from these buffers. Validation of the proposed method is demonstrated through simulation results obtained via synthesised Verilog code on Xilinx Artix-7 FPGA (XC7A35T-1CPG236C), affirming its efficacy in real-time applications.

Feature Optimization for Machine Learning Based Bearing Fault Classification

Feature Optimization for Machine Learning Based Bearing Fault Classification

Analysis on the vibration signals of a novel double-disc crack rotor-bearing system with single defect in inner race

Previous studies have paid little attention to the dynamic modeling of multi-fault systems with both bearing defect and cracked rotor. In the current research, a double-disc rotor model with a breathing crack and fault bearing was established using the finite element method (FEM). The dual-impulse phenomenon associated with inner race defect was addressed as a time-varying external excitation. The effects of varying crack depths and inner race spall lengths were further investigated. The maximum error between simulation and experiment was found to be less than 5% for the dual-impulse time spacing. The calculated results indicate that the inner race defect causes a slight increase in the rotational frequency frotor and 2frotor, followed by a decrease in the 3frotor at low speeds, as observed using Fast Fourier Transform (FFT) and Short-Time Fourier Transform (STFT). The influence of changes in crack depth is greater than the bearing defect in the system, a finding that is also confirmed at 1/2 critical speed. The phenomenon of frequency modulation observed in the simulation was also verified experimentally. The ball passing frequency on inner raceway fBPFI, frotor and mixed frequency components can be used to distinguish whether there is inner race defect.

Research on Fault Diagnosis of Rolling Bearing Based on Gramian Angular Field and Lightweight Model.

Due to the limitations of deep learning models in processing one-dimensional signal feature extraction, and high model complexity leading to low training accuracy and large consumption of computing resources, this paper innovatively proposes a rolling bearing fault diagnosis method based on Gramian Angular Field (GAF) and enhanced lightweight residual network. Firstly, the one-dimensional signal is transformed into a two-dimensional GAF image, fully preserving the signal's temporal dependency. Secondly, to address the parameter redundancy and high computational complexity of the ResNet-18 model, its residual blocks are improved. The second convolutional layer in the downsampling residual blocks is removed, traditional convolutional layers are replaced with depthwise separable convolutions, and the lightweight Efficient Channel Attention (ECA) module is embedded after each residual block. This further enhances the model's ability to capture key features while maintaining low computational cost, resulting in a lightweight model referred to as E-ResNet13. Finally, the generated GAF feature maps are fed into the E-ResNet13 model for training, and through a global average pooling layer, they are mapped to a fully connected layer for classifying the faults of rolling bearings. Verifying the superiority of the proposed GAF-E-ResNet13 model, experimental results show that the GAF image encoding method achieves higher fault recognition accuracy compared to other encoding methods. Compared with other intelligent diagnosis methods, the E-ResNet13 model demonstrates strong diagnostic performance and generalization capability under both a single condition and complex varying conditions, fully proving the innovation and practicality of this method.

Domain-augmented meta ensemble learning for mechanical fault diagnosis from heterogeneous source domains to unseen target domains

Existing domain generalization (DG) fault diagnosis methods primarily use adversarial training to reduce shifts between source domains and learn domain-invariant features. However, such features are difficult to learn when dealing with substantial shifts between source domains. In addition, focusing only on domain-invariant and ignoring domain-specific information is not conducive to improving model generalization. Furthermore, these methods are typically developed under an assumption that source domains share the same label space. In situations where the source domains exhibit heterogeneity with inconsistent labels, as explored in this paper, aligning the source domains becomes more difficult due to severe class mismatches. To address the above challenges, this paper proposes a method named domain-augmented meta ensemble learning. Specifically, Dirichlet CutMix is developed to compensate for missing classes in a source domain by utilizing knowledge from other source domains. Moreover, a training strategy summarized as “learn to generalize to unseen domains through collaborative ensemble” is designed to balance the learning of domain-specific features with the ability to generalize across domains. The proposed method is applied to the bearing and gearbox fault diagnosis, and experimental results demonstrate the excellent generalization of the method from heterogeneous source domains to unseen target domains.

Enhancing bearing and gear fault diagnosis: A VMD-PSO approach with multisensory signal integration

In the domain of signal analysis for machinery health monitoring and fault diagnosis, this paper introduces a comprehensive methodology that integrates Variational Mode Decomposition (VMD), Particle Swarm Optimization (PSO), and advanced machine learning techniques. The primary objective of this framework is to establish a robust and precise approach for signal decomposition, determining the optimal number of Intrinsic Mode Functions (IMF), and calculating key indicators, including L2/L1, Hoyer Index, and Geometric Mean Improved Gini Index (GMIGI). The methodology initiates with VMD-based signal decomposition, followed by the utilization of PSO to identify the most appropriate number of IMFs for accurate feature extraction. Subsequently, each IMF’s performance is assessed by evaluating its correlation with the input signal, and the IMF with the highest Pearson coefficient is selected as the primary feature for diagnostic purposes. To ensure the robustness and comparability of these indicators, a standardization process is implemented. The standardized indicators are then employed for machinery fault diagnosis, utilizing a diverse set of machine learning algorithms such as support vector machines and discriminant analysis. The proposed methodology undergoes rigorous validation using vibration, acoustic, and current signals, providing a versatile solution for the condition monitoring and diagnosis of mechanical systems. For model validation, we utilize four datasets comprising two vibrational, one acoustic, and one electrical dataset. The experimental results affirm the effectiveness of our approach in accurately detecting and diagnosing faults, thereby contributing to the reliability and maintenance efficiency of industrial machinery.

Thrust ball bearing fault identification from visualized data using optimized deep network

Bearings are the most common components employed in machine parts. The bearings' movement facilitates the smooth motion. They also help with friction reduction. The faults in bearings are often caused by tribological parameters. Various methods have been developed to identify faults in bearings, but they often fail to predict these accurately. This work has concentrated on designing an effective fault-recognizing model. Therefore, a framework, the Zebra-based Radial Basis Prediction Mechanism (ZbRBPM), was proposed in this work. Initially, the bearing datasets are collected, and mineral oil (MO) lubrication is added to minimize wear and friction. The primary goal of the work is to detect and classify the fault in the thrust ball bearing. The bearing vibration data included a normal vibration signal, a ball fault, and inner and outer race faults. Hence, Zebra fitness is enhanced for the optimization of tribological parameters and fault identification. The proposed model is executed in the MATLAB system. Finally, performance criteria like accuracy, precision, recall, F-score, error rate, computation time, speed, specific wear rate, friction torque, and energy consumption are validated. The performance of the proposed ZbRBPM gains better accuracy rate as 99.5 %, 99 % of precision and f-score and 99.4 % of recall. Also it significantly reduced the prediction error rate into 0.5 % with lower computation time and very low wear and friction.

Enhanced Bearing Fault Diagnosis in NC Machine Tools Using Dual-Stream CNN with Vibration Signal Analysis

Enhanced Bearing Fault Diagnosis in NC Machine Tools Using Dual-Stream CNN with Vibration Signal Analysis

Research on Small Sample Rolling Bearing Fault Diagnosis Method Based on Mixed Signal Processing Technology

The diagnosis of bearing faults is a crucial aspect of ensuring the optimal functioning of mechanical equipment. However, in practice, the use of small samples and variable operating conditions may result in suboptimal generalization performance, reduced accuracy, and overfitting for these methods. To address this challenge, this study proposes a bearing fault diagnosis method based on a symmetric two-stream convolutional neural network (CNN). The method employs hybrid signal processing techniques to address the issue of limited data. The method employs a symmetric parallel convolutional neural network (CNN) for the analysis of bearing data. Initially, the data are transformed into time–frequency maps through the utilization of the short-time Fourier transform (STFT) and the simultaneous compressed wavelet transform (SCWT). Subsequently, two sets of one-dimensional vectors are generated by reconstructing the high-resolution features of the faulty samples using a symmetric parallel convolutional neural network (CNN). Feature splicing and fusion are then performed to generate bearing fault diagnosis information and assist fault classification. The experimental results demonstrate that the proposed mixed-signal processing method is effective on small-sample datasets, and verify the feasibility and generality of the symmetric parallel CNN-support vector machine (SVM) model for bearing fault diagnosis under small-sample conditions.

Rolling bearings fault diagnosis based on two-stage signal fusion and deep multi-scale multi-sensor network

In order to realize high-precision diagnosis of bearings faults in a multi-sensor detection environment, a fault diagnosis method based on two-stage signal fusion and deep multi-scale multi-sensor networks is proposed. Firstly, the signals are decomposed and fused using weighted empirical wavelet transform to enhance weak features and reduce noise. Secondly, an improved random weighting algorithm is proposed to perform a second weighted fusion of the signals to reduce the total mean square error. The fused signals are input into the deep multi-scale residual network, the feature information of different convolutional layers is extracted through dilated convolution, and the features are fused using pyramid theory. Finally, the bearings states are classified according to the fusion features. Experiment results show the effectiveness and superiority of this method.

A Bearing Fault Diagnosis Method Based on Vibration Signal Extension and Time–Frequency Information Fusion Network Under Small Sample Conditions

A Bearing Fault Diagnosis Method Based on Vibration Signal Extension and Time–Frequency Information Fusion Network Under Small Sample Conditions

MRCFN: A multi-sensor residual convolutional fusion network for intelligent fault diagnosis of bearings in noisy and small sample scenarios

Bearing fault diagnosis is of great importance to ensure the safe and stable operation of mechanical equipment. The actual collected bearing fault signals are susceptible to strong noise interference and bearing samples for each fault state may be insufficient, which increases the difficulty of capturing effective features. Most of the existing diagnostic methods extract features from a single sensor signal for pattern recognition and fault diagnosis. The fault information provided by a single sensor is limited and incomplete, which is usually very difficult to meet the demand for accurate and reliable fault diagnosis in complex scenarios. To solve these problems, this paper proposes a multi-sensor residual convolutional fusion network (MRCFN) for intelligent fault diagnosis of bearings. Firstly, a convolutional pooling module (CPM) is coupled with the designed double ring residual module (DRRM) to rough feature extraction and deep feature mining, which not only captures the discriminative fault features from multi-sensor signal, but also avoids the performance degradation of network. Secondly, a spatial channel reconstruction module (SCRM) is further introduced to eliminate redundant information in the features and improve the network training efficiency. Finally, the presented global interactive perception fusion module (GIPFM) is connected with a classification block (CB) to globally fuse the features extracted from the acoustic and vibration signals and conduct automatic fault identification, which both can realize the complementarity and calibration of multi-sensor feature information and high precision diagnosis. The experiments and a series of comparisons are implemented on two datasets to efficaciously verify the superiority of the proposed method over five existing representative multi-sensor fusion diagnosis methods (i.e., FAC-CNN, MB-CNN, MsACNN, MRSDF, and IMSFDFL) under strong noise and small samples.

Influence of lubrication state transition on dynamic characteristics of deep groove ball bearing with localized defect in thermal environment

The accuracy of the vibration response in a defective bearing dynamics model depends on the precise representation of the lubrication friction state between the rolling element (RE) and the raceway within the model. In this study, a fault dynamic model for outer ring defect of deep groove ball bearings (DGBBs), considering the lubrication state transition in a thermal environment, is established. This model accounts for the asperity contact effect during the lubrication state transition and integrates the lubrication-friction model for temperature changes into the dynamic model when skidding occurs. The influence of lubrication state change on the fault frequency of outer ring of DGBB in thermal environment is studied. The experimental and simulation results indicate that the lubrication state of the bearing is gradually deteriorated from elastohydrodynamic lubrication to mixed lubrication with the increase of working temperature. The transformation of the lubrication state is shown to have a significant effect on friction, resulting in the fault frequency of the outer ring increasing with temperature, which exhibits substantial deviation in the thermal environment. In the temperature range of 30 °C–150 °C, the deviation of defect frequency reaches 15.5%, which affects the accuracy of bearing fault diagnosis. This study may offer recommendations for enhancing the condition monitoring of rolling bearings under extreme working conditions.

Convolutional Neural Networks Based on Resonance Demodulation of Vibration Signal for Rolling Bearing Fault Diagnosis in Permanent Magnet Synchronous Motors

Convolutional Neural Networks Based on Resonance Demodulation of Vibration Signal for Rolling Bearing Fault Diagnosis in Permanent Magnet Synchronous Motors