Bead-based Library Research Articles

Efficient and sensitive profiling of RNA-protein interactions using TLC-CLIP.

RNA-binding proteins are instrumental for post-transcriptional gene regulation, controlling all aspects throughout the lifecycle of RNA molecules. However, transcriptome-wide methods to profile RNA-protein interactions in vivo remain technically challenging and require large amounts of starting material. Herein, we present an improved library preparation strategy for crosslinking and immunoprecipitation (CLIP) that is based on tailing and ligation of cDNA molecules (TLC). TLC involves the generation of solid-phase cDNA, followed by ribotailing to significantly enhance the efficiency of subsequent adapter ligation. These modifications result in a streamlined, fully bead-based library preparation strategy, which eliminates time-consuming purification procedures and drastically reduces sample loss. As a result, TLC-CLIP displays unparalleled sensitivity, enabling the profiling of RNA-protein interactions from as few as 1000 cells. To demonstrate the effectiveness of TLC-CLIP, we profiled four endogenous RNA-binding proteins, showcasing its reproducibility and improved precision resulting from a higher occurrence of crosslinking-induced deletions. These deletions serve as an intrinsic quality metric and increase both specificity and nucleotide-resolution.

Clinical Validation of Tagmentation-Based Genome Sequencing for Germline Disorders

Genome sequencing (GS) is a powerful clinical tool used for the comprehensive diagnosis of germline disorders. GS library preparation typically involves mechanical DNA fragmentation, end repair, and bead-based library size selection followed by adapter ligation, which can require a large amount of input genomic DNA. Tagmentation using bead-linked transposomes can simplify the library preparation process and reduce the DNA input requirement. Here we describe the clinical validation of tagmentation-based PCR-free GS as a clinical test for rare germline disorders. Compared with the Genome-in-a-Bottle Consortium benchmark variant sets, GS had a recall >99.7% and a precision of 99.8% for single nucleotide variants and small insertion-deletions. GS also exhibited 100% sensitivity for clinically reported sequence variants and the copy number variants examined. Furthermore, GS detected mitochondrial sequence variants above 5% heteroplasmy and showed reliable detection of disease-relevant repeat expansions and SMN1 homozygous loss. Our results indicate that while lowering DNA input requirements and reducing library preparation time, GS enables uniform coverage across the genome as well as robust detection of various types of genetic alterations. With the advantage of comprehensive profiling of multiple types of genetic alterations, GS is positioned as an ideal first-tier diagnostic test for germline disorders.

OP040: Clinical validation of tagmentation-based genome sequencing for germline disorders

Genome sequencing (GS) is a powerful clinical tool used for the comprehensive diagnosis of germline disorders. WGS library prep typically involves mechanical DNA fragmentation, end repair, bead-based library size selection, and adapter ligation, which usually requires a large amount of input genomic DNA. Tagmentation using bead-linked transposome can simplify the library prep process and reduce the DNA input requirement. Here we describe clinical validation of tagmentation-based PCR-free GS as a clinical test for rare germline disorders.

Mega-High-Throughput Screening Platform for the Discovery of Biologically Relevant Sequence-Defined Non-Natural Polymers.

Combinatorial methods enable the synthesis of chemical libraries on scales of millions to billions of compounds, but the ability to efficiently screen and sequence such large libraries has remained a major bottleneck for molecular discovery. We developed a novel technology for screening and sequencing libraries of synthetic molecules of up to a billion compounds in size. This platform utilizes the fiber-optic array scanning technology (FAST) to screen bead-based libraries of synthetic compounds at a rate of 5 million compounds per minute (∼83 000 Hz). This ultra-high-throughput screening platform has been used to screen libraries of synthetic “self-readable” non-natural polymers that can be sequenced at the femtomole scale by chemical fragmentation and high-resolution mass spectrometry. The versatility and throughput of the platform were demonstrated by screening two libraries of non-natural polyamide polymers with sizes of 1.77M and 1B compounds against the protein targets K-Ras, asialoglycoprotein receptor 1 (ASGPR), IL-6, IL-6 receptor (IL-6R), and TNFα. Hits with low nanomolar binding affinities were found against all targets, including competitive inhibitors of K-Ras binding to Raf and functionally active uptake ligands for ASGPR facilitating intracellular delivery of a nonglycan ligand.

Bead-linked transposomes enable a normalization-free workflow for NGS library preparation

BackgroundTransposome-based technologies have enabled the streamlined production of sequencer-ready DNA libraries; however, current methods are highly sensitive to the amount and quality of input nucleic acid.ResultsWe describe a new library preparation technology (Nextera DNA Flex) that utilizes a known concentration of transposomes conjugated directly to beads to bind a fixed amount of DNA, and enables direct input of blood and saliva using an integrated extraction protocol. We further report results from libraries generated outside the standard parameters of the workflow, highlighting novel applications for Nextera DNA Flex, including human genome builds and variant calling from below 1 ng DNA input, customization of insert size, and preparation of libraries from short fragments and severely degraded FFPE samples. Using this bead-linked library preparation method, library yield saturation was observed at an input amount of 100 ng. Preparation of libraries from a range of species with varying GC levels demonstrated uniform coverage of small genomes. For large and complex genomes, coverage across the genome, including difficult regions, was improved compared with other library preparation methods. Libraries were successfully generated from amplicons of varying sizes (from 50 bp to 11 kb), however, a decrease in efficiency was observed for amplicons smaller than 250 bp. This library preparation method was also compatible with poor-quality DNA samples, with sequenceable libraries prepared from formalin-fixed paraffin-embedded samples with varying levels of degradation.ConclusionsIn contrast to solution-based library preparation, this bead-based technology produces a normalized, sequencing-ready library for a wide range of DNA input types and amounts, largely obviating the need for DNA quantitation. The robustness of this bead-based library preparation kit and flexibility of input DNA facilitates application across a wide range of fields.

140. Non-SELEX Bead-Based X-Aptamer Selection

Aptamers are typically found using an in vitro selection technique known as systematic evolution of ligands by exponential enrichment (SELEX). This process involves multiple repetitive rounds of partitioning and enzymatic amplification. Due to the limited chemical diversity of nucleic acids, especially when compared to proteins, numerous SELEX experiments have been performed with modified nucleotides in an effort to enhance aptamer-target interactions. These experiments have been successful; however, the use of nucleic acid modifications during SELEX is rather limited. Each modified nucleotide that is used in SELEX must be a compatible substrate for polymerases and will completely replace its unmodified equivalent. Herein, a one-round, bead-based aptamer selection process will be described that eliminates enzymatic amplification of candidate oligonucleotides. Due to the solid phase synthesis of the libraries, this selection process is extraordinarily flexible in terms of what modifications can be used and how many of each modification is used. For example, one single bead-based library can include all of the R-groups of the twenty most common amino acids!The bead-based selection is accomplished using a simple and rapid two-stage process that can be completed within one week without the use of any specialized equipment. The first stage involves the magnetic pull-down of library beads with labeled target, and the second involves magnetic pull-down of the modified oligonucleotides released into solution from the selected beads. This two-stage selection can be carried out against several targets simultaneously. PCR is used to create unmodified DNA replicates (i.e., bar codes) of the selected modified sequences and next generation sequencing and bioinformatics analysis are performed to identify X-Aptamer candidates for resynthesis. In this manner, X-Aptamers routinely exhibiting nanomolar affinity have been successfully developed against a long list of targets that include P. falciparum LDH, HIV p24, osteoprotegerin, HSA, myotoxin as well as his-tag.The simplicity of X-Aptamer development has allowed the process to be packaged into a kit. This selection kit enables virtually any laboratory scientist to rapidly develop his or her own X-Aptamers. The kit contains a bead-based library and multiple bar-coded primers that allow for the use of up to three targets. The customer performs the two-stage selection and then PCR amplifies the selected material using unmodified nucleotides. The PCR product, which is comprised of unmodified DNA, is then sent to AM Biotech for sequencing. AM Biotech identifies the candidate X-Aptamers from the sequencing data, resynthesizes them with the appropriate modifications and sends the X-Aptamers to the customer for affinity validation. To date, β-tests of the selection kit have been very successful.

Flexible and scalable genotyping-by-sequencing strategies for population studies.

BackgroundMany areas critical to agricultural production and research, such as the breeding and trait mapping in plants and livestock, require robust and scalable genotyping platforms. Genotyping-by-sequencing (GBS) is a one such method highly suited to non-human organisms. In the GBS protocol, genomic DNA is fractionated via restriction digest, then reduced representation is achieved through size selection. Since many restriction sites are conserved across a species, the sequenced portion of the genome is highly consistent within a population. This makes the GBS protocol highly suited for experiments that require surveying large numbers of markers within a population, such as those involving genetic mapping, breeding, and population genomics. We have modified the GBS technology in a number of ways. Custom, enzyme specific adaptors have been replaced with standard Illumina adaptors compatible with blunt-end restriction enzymes. Multiplexing is achieved through a dual barcoding system, and bead-based library preparation protocols allows for in-solution size selection and eliminates the need for columns and gels.ResultsA panel of eight restriction enzymes was selected for testing on B73 maize and Nipponbare rice genomic DNA. Quality of the data was demonstrated by identifying that the vast majority of reads from each enzyme aligned to restriction sites predicted in silico. The link between enzyme parameters and experimental outcome was demonstrated by showing that the sequenced portion of the genome was adaptable by selecting enzymes based on motif length, complexity, and methylation sensitivity. The utility of the new GBS protocol was demonstrated by correctly mapping several in a maize F2 population resulting from a B73 × Country Gentleman test cross.ConclusionsThis technology is readily adaptable to different genomes, highly amenable to multiplexing and compatible with over forty commercially available restriction enzymes. These advancements represent a major improvement in genotyping technology by providing a highly flexible and scalable GBS that is readily implemented for studies on genome-wide variation.Electronic supplementary materialThe online version of this article (doi:10.1186/1471-2164-15-979) contains supplementary material, which is available to authorized users.

Combinatorial Bead-Based Peptide Libraries Improved for Rapid and Robust Screenings

In pursuit of utilizing combinatorial peptide libraries on beads, rapid and robust screening is one of the key steps for the success of high-throughput process. We have introduced improved structural features that greatly facilitate a MALDI-MS/MS-based sequencing, associated with easy and fast synthesis and analysis of such libraries. Whilst commonly used MS-based analysis involves in sophisticated procedures such as ladder synthesis, encoding tags are not required in our MS/MS-based sequencing platform. Fragment peaks in an acquired MS/MS should be outstanding in line with correct identification of parent mass in the preceding MS. To meet these requirements a one-bead-one-compound (OBOC) peptide library was designed by placing a positively charged arginine at C-terminus. As well as enhancing the overall ionization efficiency, arginine appended in all y-ion fragments generates a series of doublet peaks under MS/MS environments, which can speed up the sequencing process in conjunction with high accuracy. It is another strong benefit that the designed library significantly suppresses the adverse formation of sodium ion adducts, which seriously jeopardizes the sequencing, especially of peptides containing negatively charged amino acids. A peptide library constructed with D-amino acids was applied to screening against a clinically significant biomarker, C-reactive protein (CRP). Through the screening of focused libraries narrowed down from a comprehensive library, several hexamer peptide ligands were successfully identified and their binding affinity and specificity towards CRP were validated by surface plasmon resonance (SPR) and dot blot experiments.

Plasma proteome analysis of patients with type 1 diabetes with diabetic nephropathy

BackgroundAs part of a clinical proteomics program focused on diabetes and its complications we are looking for new and better protein biomarkers for diabetic nephropathy. The search for new and better biomarkers for diabetic nephropathy has, with a few exceptions, previously focused on either hypothesis-driven studies or urinary based investigations. To date only two studies have investigated the proteome of blood in search for new biomarkers, and these studies were conducted in sera from patients with type 2 diabetes. This is the first reported in depth proteomic study where plasma from type 1 diabetic patients was investigated with the goal of finding improved candidate biomarkers to predict diabetic nephropathy. In order to reach lower concentration proteins in plasma a pre-fractionation step, either hexapeptide bead-based libraries or anion exchange chromatography, was performed prior to surface enhanced laser desorption/ionization time-of-flight mass spectrometry analysis.ResultsProteomic analysis of plasma from a cross-sectional cohort of 123 type 1 diabetic patients previously diagnosed as normoalbuminuric, microalbuminuric or macroalbuminuric, gave rise to 290 peaks clusters of which 16 were selected as the most promising biomarker candidates based on statistical performance, including independent component analysis. Four of the peaks that were discovered have been identified as transthyretin, apolipoprotein A1, apolipoprotein C1 and cystatin C. Several yet unidentified proteins discovered by this novel approach appear to have more potential as biomarkers for diabetic nephropathy.ConclusionThese results demonstrate the capacity of proteomic analysis of plasma, by confirming the presence of known biomarkers as well as revealing new biomarkers for diabetic nephropathy in plasma in type 1 diabetic patients.

A Proteomic Approach for Plasma Biomarker Discovery with iTRAQ Labelling and OFFGEL Fractionation

Human blood plasma contains a plethora of proteins, encompassing not only proteins that have plasma-based functionalities, but also possibly every other form of low concentrated human proteins. As it circulates through the tissues, the plasma picks up proteins that are released from their origin due to physiological events such as tissue remodeling and cell death. Specific disease processes or tumors are often characterized by plasma “signatures,” which may become obvious via changes in the plasma proteome profile, for example, through over expression of proteins. However, the wide dynamic range of proteins present in plasma makes their analysis very challenging, because high-abundance proteins tend to mask those of lower abundance. In the present study, we used a strategy combining iTRAQ as a reagent which improved the peptide ionization and peptide OFFGEL fractionation that has already been shown, in our previous research, to improve the proteome coverage of cellular extracts. Two prefractioning methods were compared: immunodepletion and a bead-based library of combinatorial hexapeptide technology. Our data suggested that both methods were complementary, with regard to the number of identified proteins. iTRAQ labelling, in association with OFFGEL fractionation, allowed more than 300 different proteins to be characterized from 400 μg of plasma proteins.

Evaluation of the Combination of Bead Technology with SELDI-TOF-MS and 2-D DIGE for Detection of Plasma Proteins

Today biomarker discovery is one of the most active aspects of proteomic investigations. However, the wide dynamic range of plasma proteins makes the analysis very challenging because high abundance proteins tend to mask those of lower abundance. Using a large bead-based library of combinatorial peptide ligands (Equalizer beads or ProteoMiner), the dynamic range of the protein concentration is compressed, the high abundance proteins present in the sample are reduced and the low abundance proteins are enriched, while retaining representatives of all proteins within the sample. In the present study, the combination of beads with surface enhanced laser desorption ionization time-of-flight mass spectrometry (SELDI-TOF-MS) and two-dimensional differential gel electrophoresis (2-D DIGE) technology were evaluated considering efficiency, reproducibility, sensitivity, and compatibility. The bead technology is easily compatible with both SELDI-TOF-MS and 2-D DIGE and the samples can be analyzed directly without any processing of the sample. The use of the beads prior SELDI-TOF-MS and 2-D DIGE enabled detection of many new protein spots/peaks and increased resolution and improved intensity of low abundance proteins in a reproducible fashion compared with the depletion technique. Several proteins have been identified by the combination of beads, 2-D DIGE and MS for example different kinds of complement factors and cytoskeletal proteins. Our data suggest that integration of the bead technology with our current proteomic technologies will enhance the possibility to deliver new peptide/protein biomarker candidates in our projects.

An ultra high throughput, double combinatorial screening method of peptide–metal binding

An effective ultra-high throughput, double combinatorial method of screening potential selective ligands based upon oligopeptides is described. This rapid screening of bead-based libraries by Micro X-ray Fluorescence (MXRF) was used to identify selective chelating agents for metals that may be found in radioactive dispersive devices (RDDs). The method has proven to be a powerful tool to rapidly and quantitatively screen metal–ligand interactions. It is a tag-free, sensitive technique, which in a combinatorial approach with peptide libraries (e.g. varying charge, length, hydrophobicity, ligand elements etc.), provides a rapid and quantitative means for identifying metal–ligand interactions.

Immunofluorescence assay and flow-cytometry selection of bead-bound aptamers.

An immunofluorescence assay was developed to identify proteins specifically binding to oligonucleoside phosphorodithioate (ODN) aptamers from a bead-bound ODN library. Accordingly, NF-kappaB p50 protein was incubated with either bead-bound NF-kappaB consensus sequence or a bead-bound ODN combinatorial library and adsorption was then assessed using a specific primary antibody and a secondary antibody conjugated with Alexa 488 fluorescent dye. This assay avoids any problems related to fluorescently labeling target proteins. The method is straightforward and readily applicable to other transcription factors and proteins, and the feasibility of its application for high-throughput screening of large aptamer bead-based libraries by flow cytometry is demonstrated.

Micro-X-ray fluorescence as a general high-throughput screening method for catalyst discovery and small molecule recognition.

A powerful high-throughput screening technique is described for the rapid screening of bead-based libraries for catalyst discovery and molecular recognition. Micro-X-ray fluorescence (MXRF) screens materials for elemental composition with mesoscale analysis. This method is nondestructive and requires minimal sample preparation and no special tags for analysis, and the screening time is dependent on the desired sensitivity. The speed, sensitivity, and simplicity of MXRF as a high-throughput screening technique were applied to screen bead-based libraries of oligopeptides for phosphate hydrolysis catalysts and molecular recognition of selective receptors for the degradation products and analogues of chemical warfare agents. This paper demonstrates the analytical or HTS capability of MXRF for combinatorial screening. It is meant only to show the capabilities of MXRF and is not meant as an exhaustive study of the catalyst and molecular recognition systems presented.

Ion-extraction ladder sequencing from bead-based libraries.

Ion-extraction mass spectrometry of ladders of mixtures of isotopically labeled compounds from single beads allows the unambiguous sequencing of bead-based peptides and offers significant advantages over traditional methods of library analysis.

A High-Density Screening Format for Encoded Combinatorial Libraries: Assay Miniaturization and Its Application to Enzymatic Reactions

A novel, miniaturized high-throughput screening format is described for assay of combinatorial libraries generated on beads. This approach, which is ideally suited to encoded libraries synthesized on beads, utilizes the photolytic cleavage of individual compounds into a high-density well array (>6500 wells within a standard 96-well microtiter plate footprint) with well volumes as low as 0.37 μl. As a model study, an encoded dipeptide library (324 members) acylated with isobutyl succinate was assayed using this format to search for potential inhibitors of matrilysin, a member of the matrix metalloproteinase superfamily.In siturelease of compounds from solid support was accomplished by photochemical cleavage after beads and enzyme were distributed to the wells. After the addition of a fluorogenic substrate to the array, the extent of enzyme inhibition and identification of active compounds was quantitated by imaging of the fluorescence emission upon uv irradiation. The structure–activity relationship data generated from the identified inhibitors in this study corroborate previous findings, thus validating the utility of this approach as a means of high-throughput screening of bead-based libraries.