Bead-based DNA Extraction Research Articles

DNA Extraction Methods

KATIE LONG and MARK FLOOD, Forensic Science Program, Fairmont State University, Fairmont, WV 26554. Evaluation of DNA Extraction Methods. Three forms of DNA extraction types include solution-based, column-based, and magnetic bead-based methodologies, with the latter being the accepted methodology used in forensic laboratories. Magnetic bead-based DNA extraction uses the negative charge of DNA and the positive charge of the magnetic beads to isolate the DNA strands and produce a purified sample. However, solution and column-based extraction methods use the same techniques of washing to purify DNA and typically have comparable DNA yields. Cheek swabs were obtained from ten individuals and the three extraction methods were performed to determine the quantitation of double-stranded DNA and the quality of the gel electrophoresis profile. Preliminary results indicate that solution-based extraction produces a slightly higher yield of double-stranded DNA having a 3.92% difference between the average quantitation of 26.29 ng/µL from solution-based and 25.28 ng/µL from magnetic bead-based methods. However, it is expected that the magnetic bead-based extraction will produce higher quality gel electrophoresis results. Overall, the methods examined produced similar DNA extraction efficiencies. This research was made possible by NASA West Virginia Space Grant Consortium, Training Grant #80NSSC20M0055 and the STaR Sure Grant.

Evaluation of Automated Magnetic Bead-Based DNA Extraction for Detection of Short Tandem Repeat Expansions With Nanopore Sequencing.

Long-read technologies such as nanopore sequencing provide new opportunities to detect short tandem repeat expansions. Therefore, a DNA extraction method is necessary that minimizes DNA fragmentation and hence allows the identification of large repeat expansions. In this study, an automated magnetic bead-based DNA extraction method and the required EDTA blood storage conditions as well as DNA and sequencing quality were evaluated for their suitability for repeat expansion detection with nanopore sequencing. DNA was extracted from EDTA blood, and subsequently, its concentration, purity, and integrity were assessed. DNA was then subjected to nanopore sequencing, and quality metrics of the obtained sequencing data were evaluated. DNA extracted from fresh EDTA blood as well as from cooled or frozen EDTA blood revealed high DNA integrity whereas storage at room temperature over 7 days had detrimental effects. After nanopore sequencing, the read length N50 values of approximately 9 kb were obtained, and based on adaptive sampling of samples with a known repeat expansion, repeat expansions up to 10 kb could be detected. The automated magnetic bead-based DNA extraction was sufficient to detect short tandem repeat expansions, omitting the need for high-molecular-weight DNA extraction methods. Therefore, DNA should be extracted either from fresh blood or from blood stored in cooled or frozen conditions. Consequently, this study may help other laboratories to evaluate their DNA extraction method regarding the suitability for detecting repeat expansions with nanopore sequencing.

Rapid Detection of Fusarium oxysporum Using Insulated Isothermal PCR and a Rapid, Simple DNA Preparation Protocol.

We developed an insulated isothermal PCR (iiPCR) method for the efficient and rapid detection of Fusarium oxysporum (Fo), which is a fungus that infects various hosts and causes severe crop losses. The Fo iiPCR method was sensitive enough to detect up to 100 copies of standard DNA template and 10 fg of Fo genomic DNA. In addition, it could directly detect 1 pg of mycelium and 10 spores of Fo without DNA extraction. Our study compared the performance of Fo iiPCR to that of three published in planta molecular detection methods-conventional PCR, SYBR green-based real-time PCR, and hydrolysis probe-based real-time PCR-in field detection of Fo. All diseased field samples yielded positive detection results with high reproducibility when subjected to an Fo iiPCR test combined with a rapid DNA extraction protocol compared to Fo iiPCR with an automated magnetic bead-based DNA extraction protocol. Intraday and interday assays were performed to ensure the stability of this new rapid detection method. The results of detection of Fo in diseased banana pseudostem samples demonstrated that this new rapid detection method was suitable for field diagnosis of Fusarium wilt and had high F1 scores for detection (the harmonic mean of precision and recall of detection) for all asymptomatic and symptomatic Fo-infected banana samples. In addition, banana samples at four growth stages (seedling, vegetative, flowering and fruiting, and harvesting) with mild symptoms also showed positive detection results. These results indicate that this new rapid detection method is a potentially efficient procedure for on-site detection of Fo.

Towards Diagnostic ctDNA Testing in Multiple Myeloma: How does Automated Magnetic Bead-Based Cell-Free DNA Extraction Compare to the Leading Silica Membrane-Based Manual Extraction?

Towards Diagnostic ctDNA Testing in Multiple Myeloma: How does Automated Magnetic Bead-Based Cell-Free DNA Extraction Compare to the Leading Silica Membrane-Based Manual Extraction?

A Field-Deployable Insulated Isothermal PCR (iiPCR) for the Global Surveillance of Toxoplasma gondii Infection in Cetaceans.

Simple SummarySince high trophic levels marine mammal species share the coastal environments and diets with humans, cetaceans provide an indication of contaminant bioaccumulation in humans and may serve as sentinels for public health problems. Parasite monitoring in marine sentinels can assist in evaluating the quality of the aquatic ecosystem’s health. T. gondii infection in cetaceans is an indicator of land-to-sea coastal pollution. Although T. gondii infection cases in cetaceans have been reported in several countries, an information gap still exists in some areas. The present study employs a portable insulated isothermal PCR (iiPCR) with an automatic extraction device as a rapid, affordable, user-friendly, and field-deployable platform to rapidly detect nucleic acid of T. gondii in stranded cetaceans. The platform utilizes duplex iiPCR designed to simultaneously detect T. gondii and a housekeeping gene of cetacean on the samples, which can prevent the false-negative results of pathogen detection and improve the accuracy of surveillance. This study would contribute to improving the environment through the warning of the sentinel animals and building new strategies by detecting the occurrence of land-based biological pollution.Toxoplasmosis is a zoonotic disease with veterinary and public health importance worldwide. Toxoplasma gondii infection in cetaceans is an indicator of land-to-sea oocyst pollution. However, there is a critical knowledge gap within the distribution of the T. gondii infection in cetaceans. To facilitate the global surveillance of this important zoonotic pathogen, we developed a field-deployable duplex insulated isothermal PCR (iiPCR) with automated magnetic bead-based DNA extraction for the on-site detection of T. gondii in stranded cetaceans. It targets the B1 gene of T. gondii combined with β2-microglobulin (B2M) gene of cetaceans as an internal control. Compared with the conventional qPCR assay, B1/B2M duplex iiPCR assay showed comparable sensitivity (21~86 bradyzoites in 25 mg of tissue) to detect spike-in standard of T. gondii DNA in cerebrum, cerebellum, skeletal muscle and myocardium tissues. Moreover, the overall agreement between the duplex iiPCR and qPCR was in almost perfect agreement (92%; 95% CI: 0.78–0.90; κ = 0.84) in detecting a synthetic spike-in standards. The B1/B2M iiPCR assay coupled with a field-deployable system provides a prompt (~1.5 h), feasible, highly sensitive and specific on-site diagnostic tool for T. gondii in stranded cetaceans. This platform provides one approach to evaluating aquatic ecosystem health and developing early warnings about negative impacts on humans and marine animals.

Simultaneous quantitation of 3ADON and 15ADON chemotypes of DON-producing Fusarium species in Chinese wheat based on duplex droplet digital PCR assay

Pathogens within Fusarium species are the primary agents of Fusarium head blight (FHB) of wheat, which bring about yield reduction and deoxynivalenol (DON) contamination and are of great concern worldwide. DON-producing Fusarium species can be classified into 3-acetyldeoxynivalenol (3ADON) and 15-acetyldeoxynivalenol (15ADON) chemotypes according to the trichothecene metabolites they produce. The detection of these two chemotypes of pathogens is paramount to the successful implementation of disease management strategies and pathogen-related DON forecasting models. In this study, a duplex droplet digital PCR (duplex ddPCR) assay was developed that allowed for the simultaneous quantitation of 3ADON and 15ADON chemotypes of DON-producing Fusarium species. The assay specificity was tested against 30 isolates of target Fusarium species and several non-target Fusarium species that are frequently isolated from wheat in China. Analyzing 90 wheat samples collected from the North China plain and Yangtze River plain demonstrated that the duplex ddPCR assay coupled with magnetic bead-based DNA extraction was competent for investigating composition of 3ADON and 15ADON chemotypes in Chinese wheat. This assay will be useful for monitoring the epidemic and geographic distribution of 3ADON and 15ADON chemotypes of FHB pathogens, which will help with the disease control and DON management.

A Sample-In-Answer-Out Microfluidic System for the Molecular Diagnostics of 24 HPV Genotypes Using Palm-Sized Cartridge.

This paper proposes an automated microfluidic system for molecular diagnostics that integrates the functions of a traditional polymerase chain reaction (PCR) laboratory into a palm-sized microfluidic cartridge (CARD) made of polystyrene. The CARD integrates 4 independent microfluidic sample lanes, which can independently complete a sample test, and each sample lane integrates the 3 functional areas of the sample preparation area, PCR amplification area, and product analysis area. By using chemical cell lysis, magnetic silica bead-based DNA extraction, combined with multi-PCR-reverse dot hybridization with microarray, 24 HPV genotypes can be typing tested in CARD. With a custom-made automated CARD operating platform, the entire process can be automatically carried out, achieving sample-in-answer-out. The custom-made operation platform is developed based on a liquid handling station-type, which can automatically load off-chip reagents without placing reagents in CARD in advance. The platform can control six CARDs to work simultaneously, detect 24 samples at a time. The results show that the limit of detection of the microfluidic system is 200 copies/test, and the positive detection rate of clinical samples by this system is 100%, which is an effective method for detection of HPV.

Molecular Detection Assays for Rapid Field-Detection of Rice Sheath Blight.

Rhizoctonia solani (Rs), a soil-borne fungal pathogen, can result in rice sheath blight (ShB), which causes yield loss. To prevent outbreaks of ShB and enhance the sustainability of rice production, it is critical to develop a rapid ShB detection method for specific, fast, and on-site disease management. In this study, a reagent for the rapid extraction of this pathogen was developed for on-site detection. The specificity and sensitivity of a novel SMS RS1-F/SMS RS1-R primer set and a ITS1/GMRS-3 reference primer set were tested, while four different extraction protocols for ShB were developed. Moreover, intraday and interday assays were performed to evaluate the reproducibility of the detection methods developed. The results indicated that all of the developed protocols are suitable for use in detecting ShB. In addition, all the samples of infected rice yielded positive Rs detection results when subjected to TaqMan probe-based real-time PCR and SYBR green-based real-time PCR (SMS RS1-F/SMS RS1-R) tests in which automatic magnetic bead-based DNA extraction was performed. These results indicated that the two molecular detection protocols were suitable for the field diagnosis of ShB for all asymptomatic and symptomatic rice samples.

Sample-to-Answer Hepatitis B Virus DNA Detection from Whole Blood on a Centrifugal Microfluidic Platform with Double Rotation Axes.

A point-of-care apparatus for hepatitis virus detection requires simple and easy-to-use processing steps and should have the same diagnostic capability as that in the central laboratory. However, no automated and efficient methods for hepatitis B virus (HBV) sample-to-answer detection include serum separation, and complete prestorage of reagents has been developed. We developed an automated sample-to-answer disc for rapid HBV detection from whole blood based on a double rotation axes centrifugal microfluidic platform. The disc with complete prestorage of reagents features fully automated and integrated serum separation from whole blood, magnetic bead-based DNA extraction, aliquoting of the nucleic acid, and real-time polymerase chain reaction. A laser diode for sequential release of prestored liquid reagents was used. Processing merely requires manual loading of the sample into the disc. We demonstrate successful sample-to-answer detection of HBV in a 500 μL whole blood sample with sample concentrations down to 102 copies/mL. The total time of the whole detection from sample-to-result is about 48 min. The disc provides a user-friendly molecular diagnostic system for rapid analysis of HBV without demanding a complicated laboratory instrument and major manual operation time. Overall, the results indicated that the developed disc could be used for HBV molecular diagnosis.

Comprehensive validation of liquid-based cytology specimens for next-generation sequencing in cancer genome analysis.

In addition to conventional cytology, liquid-based cytology (LBC) is also used for immunocytochemistry and gene analysis. However, an appropriate method to obtain high quality DNA for next-generation sequencing (NGS) using LBC specimens remains controversial. We determined the optimal conditions for fixation with an alcohol-based fixative for LBC and DNA extraction using cultured cancer cell lines and clinical specimens. The extracted DNA was processed for NGS after the DNA quality was confirmed based on the DNA concentration and degree of degradation. The optimal conditions for cultured cells to obtain high quality DNA were to fix the cells at a density of 6 × 103 or 2 × 104 cells/mL and to use the magnetic bead-based DNA extraction method. Even after storing the fixed cells for 90 days, DNA extracted using the above and other extraction kits, including membrane-based methods, did not undergo degradation. Furthermore, 5-year-old residual LBC samples demonstrated high DNA quality that was suitable for NGS. Furthermore, a cancer genome panel analysis was successfully performed with DNA extracted from cultured cells fixed at 6 × 103 cells/mL for 90 days, and with DNA from residual LBC samples even after 1 year of storage. Residual LBC samples may be a useful source of DNA for clinical NGS to promote genome-based cancer medicine.

Point-of-care genetic analysis for multiplex pathogenic bacteria on a fully integrated centrifugal microdevice with a large-volume sample

We present a fully integrated portable centrifugal microsystem for multiplex detection of food poisoning bacteria with a large volume of sample up to 1 mL. The microsystem consists of a portable genetic analyzer and a fully integrated centrifugal microdevice. The centrifugal microdevice is designed with two units: a 3D printed solution-loading cartridge and a centrifugal microfluidic disc. All the essential solutions for loop-mediated isothermal amplification (LAMP) reaction are stored inside the cartridge, and orderly released into centrifugal microdevice by a rotation program. Each unit of the device is designed with 20 reaction chambers for simultaneous detection of food-borne bacteria in one test. To increase the amount of a sample to 1 mL, we incorporated the super absorbent polymer (SAP) in the waste chamber to absorb the sample and the washing solution during the device operation. The whole process was automatically conducted including designated solution release, bead-based DNA extraction, isothermal gene amplification by Eriochrome Black (EBT)-mediated LAMP reaction, and colorimetric and UV–visible detection of amplicons. The ratio between Abs640nm and Abs570nm was used as a criterion to confirm the positive result, and the result was positive upon the condition of Abs640/Abs570 ≥ 1.0. To demonstrate the pathogenic bacteria detection on our proposed microsystem, we targeted three kinds of bacteria (Escherichia coli O157:H7, Salmonella typhimurium, and Vibrio parahaemolyticus) for monoplex and multiplex detection. The whole process from sample to result was completed within 1 h with a low limit of detection (LOD) of 102 cells/mL.

A Magnetic Bead-Based DNA Extraction Protocol Suitable for High-Throughput Genotyping in Shrimp Breeding Programs

Due to their convenience, magnetic bead-based nucleic acid extraction kits are commonly used in shrimp genotyping and pathogen screening applications. However, in advanced breeding programs requiring the testing of many thousands of shrimp, their cost can be prohibitive. Various permutations of different Proteinase K digestion, tissue lysis and bead washing buffers as well as magnetic bead types were thus evaluated to devise a high-throughput shrimp DNA extraction (SDE) protocol capable of recovering high-purity DNA using a KingFisher™ Flex Magnetic Particle processor. When genotyped using a MassARRAY® platform (Agena Bioscience) requiring 60-61 genome regions to be co-amplified in a single multiplexed PCR, DNA extracted from shrimp muscle tissue using either the SDE protocol or a commercial kit generated comparable single-nucleotide polymorphism (SNP) call data. The SDE protocol also extracted high-purity DNA from salmon fin clips. It thus offers potential to markedly reduce the costs of large-scale genotyping in shrimp and salmon breeding programs.

Permanent magnet actuation for magnetic bead-based DNA extraction

BackgroundRecently, automatic molecular diagnostic devices to extract DNA have been extensively developed using magnetic beads. While various methods can be applied to the control of the beads, the efficiency of the control when incorporated in automatic devices has not been studied. This paper proposes a compact magnet actuation method for the control of magnetic beads for DNA extraction, and compares the efficiency to the already available magnetic bead-based DNA extraction device. A permanent magnet was preferred for its compactness, while an electro-magnet provides easy operation. After investigating various methods to actuate the magnet with perspective to the size, circuit complexity, and power requirement, we determined the solenoid actuation method to be most efficient. To further reduce the dimension of the overall actuation device, direct actuation of the permanent magnet to control the hold/release of the beads was employed in this paper. The proposed method was compared with the conventional solenoid actuator with a metal plunger. An experimental fluidics device was set up with a fluidic channel and a syringe pump. The bead holding performance against the fluid speed was tested while a fixed amount of beads was loaded into the center of the channel. The group velocity of the beads was analyzed via image processing to determine whether the magnet was sufficient to hold the beads. The required power and space was analyzed and compared qualitatively and quantitatively.ResultThe proposed direct actuation method was capable of holding the beads at faster fluidic speed than the conventional solenoid actuator. The required power was comparable contemplating the high initial power of the solenoid actuator, and required much smaller space since no plunger was needed.ConclusionsThe direct actuation of the permanent magnet using a solenoid coil showed enhanced performance in holding the beads via permanent magnet, with less complexity of the actuation circuit and space. The proposed method therefore can efficiently improve the overall performance of the bead-based DNA extraction.

Multicenter validation of cancer gene panel-based next-generation sequencing for translational research and molecular diagnostics

The simultaneous detection of multiple somatic mutations in the context of molecular diagnostics of cancer is frequently performed by means of amplicon-based targeted next-generation sequencing (NGS). However, only few studies are available comparing multicenter testing of different NGS platforms and gene panels. Therefore, seven partner sites of the German Cancer Consortium (DKTK) performed a multicenter interlaboratory trial for targeted NGS using the same formalin-fixed, paraffin-embedded (FFPE) specimen of molecularly pre-characterized tumors (n = 15; each n = 5 cases of Breast, Lung, and Colon carcinoma) and a colorectal cancer cell line DNA dilution series. Detailed information regarding pre-characterized mutations was not disclosed to the partners. Commercially available and custom-designed cancer gene panels were used for library preparation and subsequent sequencing on several devices of two NGS different platforms. For every case, centrally extracted DNA and FFPE tissue sections for local processing were delivered to each partner site to be sequenced with the commercial gene panel and local bioinformatics. For cancer-specific panel-based sequencing, only centrally extracted DNA was analyzed at seven sequencing sites. Subsequently, local data were compiled and bioinformatics was performed centrally. We were able to demonstrate that all pre-characterized mutations were re-identified correctly, irrespective of NGS platform or gene panel used. However, locally processed FFPE tissue sections disclosed that the DNA extraction method can affect the detection of mutations with a trend in favor of magnetic bead-based DNA extraction methods. In conclusion, targeted NGS is a very robust method for simultaneous detection of various mutations in FFPE tissue specimens if certain pre-analytical conditions are carefully considered.

A 17-month time course study of human RNA and DNA degradation in body fluids under dry and humid environmental conditions.

Blood, saliva, and semen are some of the forensically most relevant biological stains commonly found at crime scenes, which can often be of small size or challenging due to advanced decay. In this context, it is of great importance to possess reliable knowledge about the effects of degradation under different environmental conditions and to use appropriate methods for retrieving maximal information from limited sample amount. In the last decade, RNA analysis has been demonstrated to be a reliable approach identifying the cell or tissue type of an evidentiary body fluid trace. Hence, messenger RNA (mRNA) profiling is going to be implemented into forensic casework to supplement the routinely performed short tandem repeat (STR) analysis, and therefore, the ability to co-isolate RNA and DNA from the same sample is a prerequisite. The objective of this work was to monitor and compare the degradation process of both nucleic acids for human blood, saliva, and semen stains at three different concentrations, exposed to dry and humid conditions during a 17-month time period. This study also addressed the question whether there are relevant differences in the efficiency of automated, magnetic bead-based single DNA or RNA extraction methods compared to a manually performed co-extraction method using silica columns. Our data show that mRNA, especially from blood and semen, can be recovered over the entire time period surveyed without compromising the success of DNA profiling; mRNA analysis indicates to be a robust and reliable technique to identify the biological source of aged stain material. The co-extraction method appears to provide mRNA and DNA of sufficient quantity and quality for all different forensic investigation procedures. Humidity and accompanied mold formation are detrimental to both nucleic acids.

Detection of Salmonella in Meat: Comparative and Interlaboratory Validation of a Noncomplex and Cost-Effective Pre-PCR Protocol

Cost-effective and rapid monitoring of Salmonella in the meat production chain can contribute to food safety. The objective of this study was to validate an easy-to-use pre-PCR sample preparation method based on a simple boiling protocol for screening of Salmonella in meat and carcass swab samples using a real-time PCR method. The protocol included incubation in buffered peptone water, centrifugation of an aliquot, and a boiling procedure. The validation study included comparative and interlaboratory trials recommended by the Nordic Organization for Validation of Alternative Microbiological Methods (NordVal). The comparative trial was performed against a reference method (NMKL 187, 2007) and a PCR method previously approved by NordVal with a semiautomated magnetic bead-based DNA extraction step using 122 artificially contaminated samples. The LOD was found to be 3.0, 3.2, and 3.4 CFU/sample for the boiling, magnetic bead-based, and NMKL 187 methods, respectively. When comparing the boiling method with the magnetic beads, the relative accuracy (AC), relative sensitivity (SE), and relative specificity (SP) were 98, 102, and 98%, respectively (Cohen's kappa index 0.95). When comparing results obtained by the boiling to the culture-based method, the AC, SE, and SP were found to be 98, 102, and 98%, respectively (kappa index 0.93). In the interlaboratory trial including valid results from 11 laboratories, apart from two false-positive samples by the boiling method combined with PCR, no deviating results were obtained (SP, SE, and AC were 100, 95, and 97%, respectively). This test is under implementation by the Danish meat industry, and can be useful for screening of large number of samples in the meat production, especially for fast release of minced meat with a short shelf life.

Rapid-Viability PCR Method for Detection of Live, Virulent Bacillus anthracis in Environmental Samples

In the event of a biothreat agent release, hundreds of samples would need to be rapidly processed to characterize the extent of contamination and determine the efficacy of remediation activities. Current biological agent identification and viability determination methods are both labor- and time-intensive such that turnaround time for confirmed results is typically several days. In order to alleviate this issue, automated, high-throughput sample processing methods were developed in which real-time PCR analysis is conducted on samples before and after incubation. The method, referred to as rapid-viability (RV)-PCR, uses the change in cycle threshold after incubation to detect the presence of live organisms. In this article, we report a novel RV-PCR method for detection of live, virulent Bacillus anthracis, in which the incubation time was reduced from 14 h to 9 h, bringing the total turnaround time for results below 15 h. The method incorporates a magnetic bead-based DNA extraction and purification step prior to PCR analysis, as well as specific real-time PCR assays for the B. anthracis chromosome and pXO1 and pXO2 plasmids. A single laboratory verification of the optimized method applied to the detection of virulent B. anthracis in environmental samples was conducted and showed a detection level of 10 to 99 CFU/sample with both manual and automated RV-PCR methods in the presence of various challenges. Experiments exploring the relationship between the incubation time and the limit of detection suggest that the method could be further shortened by an additional 2 to 3 h for relatively clean samples.

A magnetic bead-based DNA extraction and purification microfluidic device

This article introduces a novel magnetic bead-based DNA extraction and purification device using active magnetic mixing approach. Mixing and separation steps are performed using functionalised superparamagnetic beads suspended in cell lysis buffer in a circular chamber that is sandwiched between two external magnetic coils. Non-uniform nature of magnetic field causes temporal and spatial distribution of beads within the chamber. This process efficiently mixes the lysis buffer and whole blood in order to extract DNA from target cells. Functionalized surface of the magnetic beads then attract the exposed DNA molecules. Finally, DNA-attached magnetic beads are attracted to the bottom of the chamber by activating the bottom magnetic coil. DNA molecules are extracted from magnetic beads by washing and re-suspension processes. In this study, a circular PMMA microchamber, 25 μL in volume, 500 μm in depth and 8 mm in diameter was fabricated to purify DNA from spiked bacterial cell cultures into the whole blood sample using Promega Magazorb DNA extraction kit. The lysis efficiency was evaluated using a panel of Gram-positive (Bacillus subtilis) and Gram-negative (Escherichia coli) bacterial cells cultures into the blood sample to achieve approximately 100,000 copy levels inside the chip. Manufacturer’s standard extraction protocol was modified to a more simplified process suitable for chip-based extraction. The lysis step was performed using 5 min incubation at 56 °C followed by 5 min incubation at room temperature for binding process. Temperature rise was generated and maintained by the same external magnetic coils used for active mixing. The yield/purity and recovery levels of the extracted DNA were evaluated using quantitative UV spectrophotometer and real-time PCR assay, respectively. Real-time PCR results indicated efficient chip-based bacterial DNA extraction using modified extraction protocol comparable to the standard bench-top extraction process.

Evaluation of a semi-automated, magnetic bead-based DNA extraction method for genetic fingerprinting of forensic casework samples

In order to cope with the demanding workload for DNA profiling of forensic casework samples a concept for a semi-automated processing system was developed at the Landeskriminalamt (Office of Criminal Investigation) Baden-Württemberg, Germany [K. Vollack, et al., Implementation of a semi-automated processing system for DNA profiling of forensic casework samples, this issue]. The applied magnetic bead extraction method is based on ChargeSwitch ® Technology (CST) from Invitrogen and was established on a liquid handling workstation Freedom EVO ® 150 from Tecan.

A sensitive method for detection of EGFR gene mutations in plasma

18027 Background: Somatic mutations in the tyrosine kinase (TK) domain of the EGFR gene are associated with clinical response to TK inhibitors in patients with non-small cell lung cancer. An assay that detects such mutations in the plasma would provide a noninvasive technique to assess suitability for TK inhibitor therapy. Here we describe: 1) the development of a sensitive assay to detect the E746-A750 deletion in the TK domain of EGFR in plasma; and 2) optimization of the method for plasma DNA extraction. Methods: Our assay uses Mse I to specifically digest wild-type (WT) genomic DNA (gDNA) to reduce non-specific amplification. After digestion, samples are PCR- amplified using 1 unlabeled primer and 1 FAM-labeled primer spanning the E746-A750 deletion region and fluorescence detected with an automated analyzer. Serial dilution studies were conducted using H1650 gDNA (del E746-A750 cell line) diluted in WT gDNA after Mse I digestion. To assess detection of the deletion in plasma, 3–4 mL whole blood was spiked with 1–37 ng H1650 gDNA; gDNA from the separated plasma was then extracted (silica column/2-propanol precipitation), digested with Mse I, and amplified as above. Several extraction methods were evaluated using pooled plasma samples and PBS spiked with 10–350 ng gDNA: silica column, magnetic bead, phenol:chloroform, and 2-propanol precipitation. Results: Digestion of the WT EGFR allele followed by deletion-specific fluorescent PCR allowed detection of caof ca. 1 copy of the del E746-A750 EGFR gene (10 pg gDNA) diluted to 0.001%. Furthermore, del E746-A750 was successfully detected in 1/5 the final DNA volume (5 μl) in all spiked blood samples. Magnetic bead-based DNA extraction yielded the highest percent recovery of gDNA from PBS (69% recovery of the 10-ng sample). Phenol:chloroform extraction gave the highest yield with pooled plasma samples. Conclusions: The combination of an optimized DNA extraction method, clearing the plasma DNA sample of amplifiable WT DNA by restriction digestion, and mutation-specific fluorescent PCR provides a highly sensitive assay for detection of somatic mutations in plasma. No significant financial relationships to disclose.