Bacteriostatic Properties Research Articles

Osteogenesis promotion by injectable methacryloylated gelatin containing psoralen and its bacteriostatic properties.

The treatment of periodontitis focuses on controlling the progression of inflammation, reducing plaque accumulation, and promoting bone tissue reconstruction. Among them, the reconstruction of irregular bone resorption caused by periodontitis is a long-standing challenge. At present, the local drug treatment of periodontitis is mainly anti-inflammatory and antibacterial drugs. In this study, psoralen (Pso), a Chinese herbal medicine with anti-inflammatory, antibacterial, and osteogenic effects, was selected for the local treatment of periodontitis. Meanwhile, an injectable methacrylate gelatin (GelMA) platform loading with Pso was constructed. Pso-GelMA had the properties of fluidity, light cohesion, self-healing, and slow release, which could be better used in the deep and narrow structure of the periodontal pocket, and greatly increased the effectiveness of local drug delivery. The pore size of Gelma hydrogel did not change after loading Pso by SEM. In vitro, Pso-GelMA effectively upregulated the expression of osteogenic genes and proteins, increased alkaline phosphatase activity, promoted the mineralisation of rat bone marrow mesenchymal stem cells (BMSCs) extracellular matrix, and had significant antibacterial effects on Staphylococcus aureus and Fusobacterium nucleatum. Therefore, Pso-GelMA has immense promise in the adjuvant treatment of periodontitis.

Galacto-Oligosaccharides as an Anti-Infective and Anti-Microbial Agent for Macrolide-Resistant and -Sensitive Mycoplasma pneumoniae.

The worldwide increase in the incidence of antibiotic resistance of the atypical bacterium Mycoplasma pneumoniae (MP) challenges the treatment of MP infections, especially in children. Therefore, alternative strategies for the treatment of MP infections are warranted. Galacto- and fructo-oligosaccharides (GOS and FOS) are a specific group of complex carbohydrates that were recently shown to possess direct anti-pathogenic properties. In this study, we assessed whether GOS and FOS exert anti-microbial and anti-infective effects against MP and, especially, macrolide-resistant MP (MRMP) in vitro. The MIC values of GOS for MP and MRMP were 4%. In contrast, the MIC values of FOS for both MP and MRMP were 16%. A time-kill kinetic assay showed that FOS possess bacteriostatic properties, while for GOS, a bactericidal effect against MP and MRMP was observed after 24 h at a concentration of 4x MIC. In co-cultures with human alveolar A549 epithelial cells, GOS killed adherent MP and MRMP and also concentration-dependently inhibited their adherence to A549 cells. Further, GOS suppressed (MR)MP-induced IL-6 and IL-8 in A549 cells. None of the aforementioned parameters were affected when FOS were added to these co-cultures. In conclusion, the anti-infective and anti-microbial properties of GOS could provide an alternative treatment against MRMP and MP infections.

Antimicrobial and anti-biofilm activity of silver nanoparticles biosynthesized with Cystoseira algae extracts

Antimicrobial resistance is an ever-growing global concern to public health with no clear or immediate solution. Silver nanoparticles (AgNPs) have long been proposed as efficient agents to fight the growing number of antibiotic-resistant strains. However, the synthesis of these particles is often linked to high costs and the use of toxic, hazardous chemicals, with environmental and health impact. In this study, we successfully produced AgNPs by green synthesis with the aid of the extract of two brown algae—Cystoseira baccata (CB) and Cystoseira tamariscifolia (CT)—and characterized their physico-chemical properties. The NPs produced in both cases (Ag@CB and Ag@CT) present similar sizes, with mean diameters of around 22 nm. The antioxidant activity of the extracts and the NPs was evaluated, with the extracts showing important antioxidant activity. The bacteriostatic and bactericidal properties of both Ag@CB and Ag@CT were tested and compared with gold NPs produced in the same algae extracts as previously reported. AgNPs demonstrated the strongest bacteriostatic and bactericidal properties, at concentrations as low as 2.16 µg/mL against Pseudomonas aeruginosa and Escherichia coli. Finally, the capacity of these samples to prevent the formation of biofilms characteristic of infections with a poorer outcome was assessed, obtaining similar results. This work points towards an alternative for the treatment of bacterial infections, even biofilm-inducing, with the possibility of minimizing the risk of drug resistance, albeit the necessary caution implied using metallic NPs.Graphical abstract

Effects of Different Isomers of Thiophenedicarboxylic Acids on the Synthesis and Properties of Thiophene-Based Sustainable Polyesters

The need for high-performance bioplastics brings new challenges to the design and preparation of next-generation sustainable bioplastics. With the emergence of a number of biobased monomers with a similar chemical structure in recent years, it is necessary to conduct a systematic and in-depth study on the effects of different isomers of monomers on the final material properties. Considering the potential barrier and bacteriostatic properties of emerging thiophene-based polyesters, this work systematically investigated the effects of different isomers of thiophenedicarboxylic acids (TFDCAs), 2,5-TFDCA and 3,4-TFDCA, on the synthesis and properties of polyesters by a combination of experiments and molecular simulations. A novel biobased polyester based on the 3,4-TFDCA isomer was synthesized and compared with its analogue. Theoretical studies modeled through population balances were performed to simulate the polymerization kinetics of these two polyesters. Contrary to expectations, we successfully prepared high-molecular-weight poly(1,4-butylene 3,4-thiophenedicarboxylate) (3,4-P14BTF) via melt polycondensation. As we know, for the polyesters based on the analogous phthalic acid, high molecular weights cannot be obtained by this strategy. Barrier properties were further systematically studied from both theoretical calculation and experimental perspectives. The superior gas and water vapor barrier properties of semicrystalline poly(1,4-butylene 2,5-thiophenedicarboxylate) (2,5-P14BTF) could be attributed to the decreased chain mobility and smaller fractional free volume. More intriguingly, they exhibited improved bacteriostatic effect compared to poly(lactic acid) (PLA), while no notable difference was observed between 2,5- and 3,4-isomers. 3,4-P14BTF could be degraded under milder conditions than 2,5-P14BTF enabled by methanolysis with the imidazole acetate ionic liquid catalyst. Therefore, in-depth analysis of the effects of different isomers of monomers should be considered for the design and preparation of new high-barrier and antibacterial polymeric materials for advanced applications such as biobased active food packaging and electronic encapsulation.

The Effect of Hyaluronic Acid Gel on Periodontal Parameters, Pro-Inflammatory Cytokines and Biochemical Markers in Periodontitis Patients

Hyaluronic acid in its various forms shows bacteriostatic, fungistatic, anti-inflammatory, anti-edematous, osteoinductive, and pro-angiogenetic properties. This study aimed to evaluate the effect of subgingival delivery of 0.8% hyaluronic acid (HA) gel on clinical periodontal parameters, pro-inflammatory cytokines (IL-1 beta and TNF-alpha) and biochemical markers of inflammation (C-reactive protein (CRP) and alkaline phosphatase (ALP) enzymes) in patients with periodontitis. Seventy-five patients with chronic periodontitis were divided randomly into three groups (25 in each group): group I received scaling and surface root debridement (SRD) + HA gel; group II received SRD + chlorhexidine gel; and group III received surface root debridement alone. Clinical periodontal parameter measurements and blood samples were collected to estimate pro-inflammatory and biochemical parameters at the baseline before therapy and after two months of therapy. The results show that HA gel has a significant effect on the reduction in clinical periodontal parameters (PI, GI, BOP, PPD, and CAL), IL-1 beta, TNF-alpha, CRP, and ALP after 2 months of therapy as compared to the baseline (p < 0.05) with nonsignificant differences from the CHX group (p > 0.05), except GI (p < 0.05), and significant differences from the SRD group (p < 0.05). Moreover, significant differences were found between the three groups regarding the mean improvements of GI, BOP, PPD, IL-1β, CRP, and ALP. It can be concluded that HA gel has a positive effect on clinical periodontal parameters and improvements in inflammatory mediators similar to chlorhexidine. Therefore, HA gel can be used as an adjuvant to SRD in the treatment of periodontitis.

Effects of cranberry powder on the diversity of microbial communities and quality characteristics of fermented sausage.

Fermented sausage is popular with many consumers because of its distinctive flavor, but the safety of it has attracted widespread attention. At present, nitrite is widely used in fermented meat products because of its ideal color and bacteriostatic effect, but nitrite can be transformed into nitrosamines, which cause strong carcinogenic effects. Therefore, it is urgent to actively explore safe and efficient nitrite substitutes. In this study, cranberry powder was selected as a natural substitute for nitrite during the production of fermented sausage due to its unique antioxidant and bacteriostatic properties. The results showed that adding an appropriate amount of cranberry powder (5 g/kg) promoted a better color of the fermented sausage and promoted the accumulation of aromatic compounds. Furthermore, Pediococcus and Staphylococcus became the dominant species, accounting for more than 90% in all samples. According to the Pearson correlation analysis, Staphylococcus and Pediococcus had positive effects on the quality characteristics of fermented sausage products. This study provided the latest information on the application of cranberry powder as a natural substitute for nitrite in the process of manufacturing fermented sausage, and it also introduced an advanced solution to improve the quality characteristics and safety of fermented sausage products during processing.

Development of Antimicrobial Microcapsules of Saffron Petal Essential Oil by Condensation Method and Its Excellent Binding on Cotton Fibers

In recent years, textiles with antimicrobial properties have attracted more and more attention. As natural antimicrobial agents, essential oils’ potential application value lies in their ability to provide textiles with antimicrobial functions. In this paper, organic solvent extraction (n-hexane, petroleum ether, ethanol) and steam distillation were used to extract saffron petal essential oil (SPEO). It was found that organic solvent extraction (ethanol) had the highest extraction rate and the most apparent bacteriostatic effect. SPEO-Ms were prepared using the composite condensation method with gelatin and chitosan. The microstructure, encapsulation efficiency, slow-release performance, infrared spectrum, and thermal stability of the SPEO-Ms were evaluated. The results showed that the microencapsulated essential oil had good bacteriostatic properties. Antimicrobial cotton fabric was prepared by impregnating microcapsules onto cotton fibers. The effects of the microcapsules’ concentration on the whiteness, air permeability, moisture permeability, and bacteriological inhibition of the fabric were investigated. The results revealed that SPEO-Ms have the potential to be used as a new antimicrobial agent in textiles.

Half-Sandwich Type Platinum-Group Metal Complexes of C-Glucosaminyl Azines: Synthesis and Antineoplastic and Antimicrobial Activities

While platinum-based compounds such as cisplatin form the backbone of chemotherapy, the use of these compounds is limited by resistance and toxicity, driving the development of novel complexes with cytostatic properties. In this study, we synthesized a set of half-sandwich complexes of platinum-group metal ions (Ru(II), Os(II), Ir(III) and Rh(III)) with an N,N-bidentate ligand comprising a C-glucosaminyl group and a heterocycle, such as pyridine, pyridazine, pyrimidine, pyrazine or quinoline. The sugar-containing ligands themselves are unknown compounds and were obtained by nucleophilic additions of lithiated heterocycles to O-perbenzylated 2-nitro-glucal. Reduction of the adducts and, where necessary, subsequent protecting group manipulations furnished the above C-glucosaminyl heterocycles in their O-perbenzylated, O-perbenzoylated and O-unprotected forms. The derived complexes were tested on A2780 ovarian cancer cells. Pyridine, pyrazine and pyridazine-containing complexes proved to be cytostatic and cytotoxic on A2780 cells, while pyrimidine and quinoline derivatives were inactive. The best complexes contained pyridine as the heterocycle. The metal ion with polyhapto arene/arenyl moiety also impacted on the biological activity of the complexes. Ruthenium complexes with p-cymene and iridium complexes with Cp* had the best performance in ovarian cancer cells, followed by osmium complexes with p-cymene and rhodium complexes with Cp*. Finally, the chemical nature of the protective groups on the hydroxyl groups of the carbohydrate moiety were also key determinants of bioactivity; in particular, O-benzyl groups were superior to O-benzoyl groups. The IC50 values of the complexes were in the low micromolar range, and, importantly, the complexes were less active against primary, untransformed human dermal fibroblasts; however, the anticipated therapeutic window is narrow. The bioactive complexes exerted cytostasis on a set of carcinomas such as cell models of glioblastoma, as well as breast and pancreatic cancers. Furthermore, the same complexes exhibited bacteriostatic properties against multiresistant Gram-positive Staphylococcus aureus and Enterococcus clinical isolates in the low micromolar range.

Gliadin nanoparticles stabilized by sodium carboxymethyl cellulose as carriers for improved dispersibility, stability and bacteriostatic activity of Natamycin

There is increasing interest in the development of Natamycin (Nata) containing ingredients appropriate as substitutes for chemical food preservatives, due to its safe and efficient antimycotic effects. This work reported that gliadin (Gli) could effectively perform as nano-vehicles to enhance Nata's water dispersibility and stability. Nata-Gli nanoparticles (NPs) were prepared by adjusting the solution pH and anti-solvent method using the amphiphilicity of Gli. The encapsulation rate of NPs could reach 85.5%, and the loading rate was 8.6%. Nata-Gli/CMC nanocomposite system was prepared using sodium carboxymethylcellulose (CMC) as an antisolvent. Compared with the Nata-Gli NPs, the spherical structure of the particles with CMC addition is more apparent and more homogeneous. The bacteriostatic properties of the Nata-Gli/CMC nanocomposite system against Penicillium expansum were tested in vitro and in vivo. The results in vitro results confirmed that the application of Nata-Gli/CMC nanocomposite system improved the water dispersibility of natamycin and thus enhanced the bacteriostatic activity of natamycin. The results in vivo indicated that Nata-Gli/CMC nanocomposite system reduced the occurrence of rot and mildew in inoculated kumquat. The findings provide an effective strategy to provide a new idea for applying Nata and provide a reference for developing the post-harvest colloidal delivery system.

Bacterial cellulose: A highly versatile nanomaterial.

Bacterial cellulose: A highly versatile nanomaterial.

Development of cellulose acetate/CuO/AgNP nanofibers based effective antimicrobial wound dressing

The research reports synthesis of the CuO/AgNP composite nanoparticles and their electrospun cellulose acetate (CA) nanofiber for effective and safer antimicrobial wound dressing applications. Synthesis of the composite nanoparticles was confirmed by XRD, TEM and EDS analysis. The SEM confirmed regular morphologies of the composite nanofibers. CA nanofibers with three different concentrations of CuO/AgNPs (3%,6% and 10%) were fabricated. The Kirby-Buyer disk diffusion test and relative cell viability results confirmed sufficiently larger bacteriostatic and bactericidal properties of the nanocomposites. The water absorption/transport, swelling ratio and tensile strength results revealed the nanocomposite’s potential for the application. Our findings suggested the CA/CuO/AgNP as effective antimicrobial wound dressing material.

Enhanced Bacteriostatic Properties of Ti Alloys by Surface Nitriding

Surface nitriding has been widely used to improve the surface physicochemical properties of Ti alloys. However, the currently utilized surface nitriding methods, such as laser nitriding, typically require expensive and complicated instruments, which makes surface nitriding a less cost-effective process. Meanwhile, the antibacterial properties of surface-nitrided Ti alloy implants have not been evaluated. Thereafter, in this study, we were aiming to develop an effective, simple, and cost-effective surface nitriding strategy to enhance the antimicrobial properties of Ti alloy implants. The surface nitriding strategy was realized by wet-chemical etching and thermal treatment at controlled conditions. Results showed that the above surface modification treatments exerted significant effects on the phase composition and morphology of the newly formed phases on the surface of Ti samples. Crystalline TiN and TiO2 formed after treatments. Meanwhile, amorphous nitrides and oxynitride were also presented on the sample surfaces. The surface-modified Ti samples showed a bacterial inhibition effect compared with the non-treated Ti ones, and the bacterial inhibition effect was attributed to the released ammonia species from the surface of Ti samples. The surface modification strategy shows promise to improve the bacteriostatic property of Ti implants in dental and orthopedic fields.

Healing Wounds Efficiently with Biomimetic Soft Matter: Injectable Self-Healing Neutral Glycol Chitosan/Dibenzaldehyde-Terminated Poly(ethylene glycol) Hydrogel with Inherent Antibacterial Properties.

The high prevalence of acquiring skin wounds, along with the emergence of antibiotic-resistant strains that lead to infections, impose a threat to the physical, mental, and socioeconomic health of society. Among the wide array of wound dressings developed, hydrogels are regarded as a biomimetic soft matter of choice owing to their ability to provide a moist environment ideal for healing. Herein, neutral glycol chitosan (GC) was cross-linked via imine bonds with varying concentrations of dibenzaldehyde-terminated polyethylene glycol (DP) to give glycol chitosan/dibenzaldehyde-terminated polyethylene glycol hydrogels (GC/DP). These dynamic Schiff base linkages (absorption peak at 1638 cm-1) within the hydrogel structure endowed their ability to recover from damage as characterized by high-low strain exposure in continuous step strain rheology. Along with their good injectability and biodegradability, the hydrogels exhibited remarkable inhibition against E. coli, P. aeruginosa, and S. aureus. GC/DP hydrogels demonstrated high LC50 values in vivo using zebrafish embryos as a model system due to their relative biocompatibility and a remarkable 93.4 ± 0.88% wound contraction at 30-dpw against 49.1 ± 3.40% of the control. To the best of our knowledge, this is the first study that developed injectable glycol chitosan/dibenzaldehyde-terminated polyethylene glycol self-healing hydrogels for application in wound healing with intrinsic bacteriostatic properties against the three bacteria.

Creation of smart compression garment using magnetic nanotextiles

Purpose This paper aims to prove the expediency and effectiveness of magnetic textiles use obtained by adding nanopowder synthesized on the basis of oxides of divalent and trivalent iron oxides, taking into account bacteriostatic, magnetotherapeutic and compressive properties. Design/methodology/approach The research includes methods of synthesis of nanoelements of bivalent and trivalent iron, methods of the theory of elasticity for determining the pressure between compression clothing and a limb, methods of creating an annular magnetic field with determination of its voltage, methods of determining the growth dynamics of mold bacteria and methods of approximation of experimental data. Findings On the base of the determination of the forces arising from the interaction of magnetic nanotextiles with a magnetic field, the expediency of using these materials in the creation of compression clothing has been proven. An additional medical value of magnetic textiles is the bacteriostatic effect. The content of magnetic nanoelements in the textile composition of 0.2% almost completely suppresses mold infections Research limitations/implications Cotton samples with the addition of nanocomponents based on ferric and ferric oxides were studied. Practical implications Magnetotextile materials can be used in magnetotherapy, compression clothing, in textile products that provide bacteriostatic properties. Originality/value The use of magnetic textile materials is a perspective direction for the creation of medical textile products with complex properties.

Preparation of PVDF-g-PAA@Cu Hydrophilic Membrane by One-Step Gamma-Ray Irradiation and Its Antifouling and Bacteriostatic Properties

Preparation of PVDF-g-PAA@Cu Hydrophilic Membrane by One-Step Gamma-Ray Irradiation and Its Antifouling and Bacteriostatic Properties

Comparison of Different Extraction Procedures for Isolating Bacteriostatic and Anti-pseudorabies Virus Components from Rodgersia Sambucifolia (Hemsl)

Medicinal plants are considered a repository of bioactive ingredients. Rodgersia sambucifolia (Hemsl), a herbaceous perennial originating from East Asia, has demonstrated bacteriostatic and antiviral properties. The aim of this study was to identify an effective extraction procedure for isolating potential bacteriostatic and antiviral compounds from the plant. The crude extracts were obtained using ethanol, methanol or acetone, and stepwise extracted with ethyl acetate, n-butanol or water. The minimum inhibitory concentration (MIC), minimum bactericidal concentration (MBC), and diameters of the inhibition zone were evaluated for bacteriostatic efficacy. These tests were carried out with Enterococcus faecalis, Enterococcus faecium, Shigella dysenteriae, Streptococcus lactis, Staphylococcus aureus, and Streptococcus lactis. The antiviral activities of prevention, treatment, and neutralization, utilizing pseudorabies virus, were evaluated using swine testicular cell viability. The active ingredients from the best bioactivity extraction procedure were analyzed using liquid chromatography-mass spectrometry (LC-MS). When ranked highest to lowest, the bacteriostatic and antiviral effects were obtained in the order of the crude extracts prepared from ethanol, methanol, and acetone. Bacteriostatic and antiviral effects were highest in the stepwise extraction of ethyl acetate, followed by the extraction of n-butanol and water. The main compounds identified by LC-MS in the ethyl acetate phase in descending order of content were: bergenin, palmitic acid, baicalein, linoleic acid, chrysin, γ-linolenic acid, catechin gallate, catechin, ursolic acid, and baicalin. This study provides a research basis for the development of bacteriostatic and antiviral drugs from traditional Chinese herbal medicines.

Wear Performance of a Novel Silicon Nitride Ceramic for Biomedical Applications

Ceramic materials are sometimes used as bearing surfaces of joint implants due to their high wear resistance and biocompatibility. Silicon nitride (Si3N4) is one of the ceramics under investigation for such use, owing to its bacteriostatic properties and high wear resistance. Traditional Si3N4 is sintered using Al2O3 and Y2O3 as sintering aids. To improve the biocompatibility and bioactivity of Si3N4, new sintering aids (SrO, MgO, and SiO2) were used in this work. This substitution may however have substantial effects on the wear properties of the material. Hence, the aim of this study was to evaluate these effects. Multidirectional pin-on-disc wear tests against ultra-high molecular weight polyethylene pins were used to this end, running in fetal bovine serum solution at 37 °C for 2 million cycles. The surface roughness, phase composition, and surface morphology of the surfaces were investigated, together with the pH of the wear test lubricant and compared to a traditional Si3N4 composition. XRD and SEM results showed that the prepared ceramics were composed of α- and β-phase Si3N4. The surface roughness of the Si3N4 ceramic discs was in accordance with the biomedical standard, and the wear test results demonstrated that the new ceramics had a low wear factor and a comparable coefficient of friction to Si3N4 ceramics reported in previous work. However, the dissolution of the materials over time may be a concern for biotribological applications, such as long-term use or in other wear couples.

Synthesis and Characterization of Cobalt-Doped Ferrites for Biomedical Applications.

Novel materials for biomedical applications are in critical need of time. In the present work, the antibacterial properties of Co1-x Ni x Mg x Fe2O4 nanoparticles (NPs) are assessed by the disc diffusion method for the common pathogen, that is, Gram-negative (Escherichia coli and Pseudomonas aeruginosa) and Gram-positive (Staphylococcus aureus) bacteria. Overnight grown bacterial cultures were individually lawn-cultured on nutrient agar plates. All samples of NP concentrations (2 mg/mL) were prepared in sterile water and dispensed by sonication. Sterile filter paper discs (1.0 mm) were saturated by the (doped CoFe2O4) NP solution and incubated at 37 ± 0.1 °C for 24 h. The NPs with a fine size of 30-70 nm of Co1-x Ni x Mg x Fe2O4 were achieved using the sol-gel method by doping CoFe2O4 initially with Ni and codoping with Mg, and their properties were studied by X-ray diffraction, scanning electron microscopy, energy-dispersive X-ray spectroscopy, and Fourier transform infrared techniques. According to the results, Co0.5Ni0.25Mg0.25Fe2O4 NPs exhibited potent antibacterial activities against s. aureus having an inhibition zone of 6.5 mm and P. aeruginosa having an inhibition zone of 6 mm as that were examined. The result shows that the bacteriostatic properties of NPs are used for numerous applications such as hyperthermia, antibacterial treatments, and targeted drug delivery.

Pheophorbide-a as a Light-Triggered Liposomal Switch: For the Controlled Release of Alpinia galanga (A. galanga) Essential Oil and Its Stability, Antioxidant, and Antibacterial Activity Assessment.

In this study, Alpinia galanga essential oil liposomes (EO-Lip) were prepared with soybean lecithin and cholesterol as wall materials. A light-responsive liposome (EO-PLip) was designed for the controlled release of A. galanga oil based on the light-responsive properties of Pheophorbide-a. The dependence of Pheophorbide-a on illumination time was proved by UV spectroscopy. Characterization techniques such as UV spectroscopy, transmission electron microscopy, and Fourier transform infrared spectroscopy demonstrated that the essential oils were successfully encapsulated in liposomes. Moreover, the particle size of EO-PLip was 166.30 nm, the polydispersity index was 0.22, the zeta potential was -49.50 mV, and the encapsulation efficiency was 30.83%. Both EO-Lip and EO-Plip have high sustained-release effects on essential oil and showed light-responsive release characteristics under infrared stimulation. The prepared liposomes had good storage stability at 4 °C for 28 d. EO-PLip showed excellent transient antioxidant and bacteriostatic properties based on the ability to respond to light and slow release. This EO-PLip provided a platform for essential oils and might be used as a potent and controllable solution.

Fluoroplast Doped by Ag2O Nanoparticles as New Repairing Non-Cytotoxic Antibacterial Coating for Meat Industry

Foodborne infections are an important global health problem due to their high prevalence and potential for severe complications. Bacterial contamination of meat during processing at the enterprise can be a source of foodborne infections. Polymeric coatings with antibacterial properties can be applied to prevent bacterial contamination. A composite coating based on fluoroplast and Ag2O NPs can serve as such a coating. In present study, we, for the first time, created a composite coating based on fluoroplast and Ag2O NPs. Using laser ablation in water, we obtained spherical Ag2O NPs with an average size of 45 nm and a ζ-potential of -32 mV. The resulting Ag2O NPs at concentrations of 0.001-0.1% were transferred into acetone and mixed with a fluoroplast-based varnish. The developed coating made it possible to completely eliminate damage to a Teflon cutting board. The fluoroplast/Ag2O NP coating was free of defects and inhomogeneities at the nano level. The fluoroplast/Ag2O NP composite increased the production of ROS (H2O2, OH radical), 8-oxogualnine in DNA in vitro, and long-lived active forms of proteins. The effect depended on the mass fraction of the added Ag2O NPs. The 0.01-0.1% fluoroplast/NP Ag2O coating exhibited excellent bacteriostatic and bactericidal properties against both Gram-positive and Gram-negative bacteria but did not affect the viability of eukaryotic cells. The developed PTFE/NP Ag2O 0.01-0.1% coating can be used to protect cutting boards from bacterial contamination in the meat processing industry.