Bacterial Nanocellulose Hydrogels Research Articles

Potential of PVA-doped bacterial nano-cellulose tubular composites for artificial blood vessels.

Bacterial nano-cellulose (BNC) hydrogel has been suggested as a promising biomaterial for artificial blood vessels. However, some properties of BNC do not achieve all of the requirements of a native blood vessel - compliance, for instance. In order to improve the properties of BNC tubes, poly(vinyl alcohol) (PVA) was introduced in the BNC tubes to make composites. Two types of pristine BNC tubes with different inner structures were produced in two bioreactors. A PVA tube and PVA-BNC tubular composites were made for comparison by using a thermally-induced phase separation method. The morphology, water permeability, cytotoxicity, and mechanical properties, including the axial stretch strength, suture retention, burst pressure, and compliance of all the tubes, were evaluated and compared. The results indicated that PVA impregnated into BNC tubes and then significantly improved the properties of BNC, especially the mechanical properties and water permeability. The BNC tube itself played a great role in the performances of the composites as the skeleton base material. The PVA-BNC composite tubes could constitute new biomaterial candidates for vascular grafts.

Biocompatibility evaluation of densified bacterial nanocellulose hydrogel as an implant material for auricular cartilage regeneration.

Bacterial nanocellulose (BNC), synthesized by the bacterium Gluconacetobacter xylinus, is composed of highly hydrated fibrils (99 % water) with high mechanical strength. These exceptional material properties make BNC a novel biomaterial for many potential medical and tissue engineering applications. Recently, BNC with cellulose content of 15 % has been proposed as an implant material for auricular cartilage replacement, since it matches the mechanical requirements of human auricular cartilage. This study investigates the biocompatibility of BNC with increased cellulose content (17 %) to evaluate its response in vitro and in vivo. Cylindrical BNC structures (Ø48 × 20 mm) were produced, purified in a built-in house perfusion system, and compressed to increase the cellulose content in BNC hydrogels. The reduction of endotoxicity of the material was quantified by bacterial endotoxin analysis throughout the purification process. Afterward, the biocompatibility of the purified BNC hydrogels with cellulose content of 17 % was assessed in vitro and in vivo, according to standards set forth in ISO 10993. The endotoxin content in non-purified BNC (2,390 endotoxin units (EU)/ml) was reduced to 0.10 EU/ml after the purification process, level well below the endotoxin threshold set for medical devices. Furthermore, the biocompatibility tests demonstrated that densified BNC hydrogels are non-cytotoxic and cause a minimal foreign body response. In support with our previous findings, this study concludes that BNC with increased cellulose content of 17 % is a promising non-resorbable biomaterial for auricular cartilage tissue engineering, due to its similarity with auricular cartilage in terms of mechanical strength and host tissue response.

Loading of bacterial nanocellulose hydrogels with proteins using a high-speed technique

For the loading of the natural biopolymer bacterial nanocellulose (BNC) with drugs, usually an adsorption method has been described. In the present study, a high-speed loading technique based on vortexing was established for the incorporation of proteins in BNC as drug delivery system. Compared to the conventional technique, vortexing accomplished in 10min the same protein loading capacity as the adsorption method in 24h with comparable protein distribution and protein stability. Vortex loaded BNC demonstrated a retarded protein release with a lower total amount of released protein after 168h compared to the adsorption loaded BNC. This was correlated with a densification of the fiber network as shown by electron microscopy and a reduced water holding capacity. These observations offer the possibility to control the drug release by selection of the preparation technique.

Carbon aerogels from bacterial nanocellulose as anodes for lithium ion batteries

Carbon aerogels with large open pores and high surface area are fabricated via pyrolysis of a readily available natural resource, e.g., bacterial nanocellulose (BNC) aerogels. Freeze-drying of the BNC hydrogels is used to preserve the 3D open network structure upon calcination whereas using Fe(III) improves the yield and H/C ratio. These carbon aerogels are explored as anodes in lithium ion batteries where it is shown that they deliver superior capacity retention and rate performance compared to other carbon-based materials.

Laser-structured bacterial nanocellulose hydrogels support ingrowth and differentiation of chondrocytes and show potential as cartilage implants

The small size and heterogeneity of the pores in bacterial nanocellulose (BNC) hydrogels limit the ingrowth of cells and their use as tissue-engineered implant materials. The use of placeholders during BNC biosynthesis or post-processing steps such as (touch-free) laser perforation can overcome this limitation. Since three-dimensionally arranged channels may be required for homogeneous and functional seeding, three-dimensional (3-D) laser perforation of never-dried BNC hydrogels was performed. Never-dried BNC hydrogels were produced in different shapes by: (i) the cultivation of Gluconacetobacter xylinus (DSM 14666; synonym Komagataeibacter xylinus) in nutrient medium; (ii) the removal of bacterial residues/media components (0.1M NaOH; 30min; 100°C) and repeated washing (deionized water; pH 5.8); (iii) the unidirectional or 3-D laser perforation and cutting (pulsed CO2 Rofin SC ×10 laser; 220μm channel diameter); and (iv) the final autoclaving (2M NaOH; 121°C; 20min) and washing (pyrogen-free water). In comparison to unmodified BNC, unidirectionally perforated – and particularly 3-D-perforated – BNC allowed ingrowth into and movement of vital bovine/human chondrocytes throughout the BNC nanofiber network. Laser perforation caused limited structural modifications (i.e. fiber or globular aggregates), but no chemical modifications, as indicated by Fourier transform infrared spectroscopy, X-ray photoelectron scattering and viability tests. Pre-cultured human chondrocytes seeding the surface/channels of laser-perforated BNC expressed cartilage-specific matrix products, indicating chondrocyte differentiation. 3-D-perforated BNC showed compressive strength comparable to that of unmodified samples. Unidirectionally or 3-D-perforated BNC shows high biocompatibility and provides short diffusion distances for nutrients and extracellular matrix components. Also, the resulting channels support migration into the BNC, matrix production and phenotypic stabilization of chondrocytes. It may thus be suitable for in vivo application, e.g. as a cartilage replacement material.