Bacterial Membrane Disruption Research Articles

Antimicrobial Guanidinylate Polycarbonates Show Oral In Vivo Efficacy Against Clostridioides Difficile.

The emerging antibiotic resistance has been named by the World Health Organization (WHO) as one of the top 10 threats to public health. Notably, methicillin-resistant Staphylococcus aureus (MRSA) and vancomycin-resistant Enterococcus faecalis (VREF) are designated as serious threats, whereas Clostridioides difficile (C. difficile) is recognized as one of the most urgent threats to human health and unmet medical need. Herein, they report the design and application of novel biodegradable polymers - the lipidated antimicrobial guanidinylate polycarbonates. These polymers showed potent antimicrobial activity against a panel of bacteria with fast-killing kinetics and low resistance development tendency, mainly due to their bacterial membrane disruption mechanism. More importantly, the optimal polymer showed excellent antibacterial activity against C. difficile infection (CDI) in vivo via oral administration. In addition, compared with vancomycin, the polymer demonstrated a much-prolonged therapeutic effect and virtually diminished recurrence rate of CDI. The convenient synthesis, easy scale-up, low cost, as well as biodegradability of this class of polycarbonates, together with their in vitro broad-spectrum antimicrobial activity and orally in vivo efficacy against CDI, suggest the great potential of lipidated guandinylate polycarbonates as a new class of antibacterial biomaterials to treat CDI and combat emerging antibiotic resistance.

Antimicrobial peptide glatiramer acetate targets Pseudomonas aeruginosa lipopolysaccharides to breach membranes without altering lipopolysaccharide modification

Antimicrobial peptides (AMPs) are key components of innate immunity across all domains of life. Natural and synthetic AMPs are receiving renewed attention in efforts to combat the antimicrobial resistance (AMR) crisis and the loss of antibiotic efficacy. The gram-negative pathogen Pseudomonas aeruginosa is one of the most concerning infecting bacteria in AMR, particularly in people with cystic fibrosis (CF) where respiratory infections are difficult to eradicate and associated with increased morbidity and mortality. Cationic AMPs exploit the negatively charged lipopolysaccharides (LPS) on P. aeruginosa to bind and disrupt bacterial membrane(s), causing lethal damage. P. aeruginosa modifies its LPS to evade AMP killing. Free-LPS is also a component of CF sputum and feeds pro-inflammatory cycles. Glatiramer acetate (GA) is a random peptide co-polymer—of glycine, lysine, alanine, tyrosine—used as a drug in treatment of multiple sclerosis (MS); we have previously shown GA to be an AMP which synergises with tobramycin against CF P. aeruginosa, functioning via bacterial membrane disruption. Here, we demonstrate GA’s direct binding and sequestration/neutralisation of P. aeruginosa LPS, in keeping with GA’s ability to disrupt the outer membrane. At CF-relevant LPS concentrations, however, membrane disruption by GA was not strongly inhibited. Furthermore, exposure to GA did not result in increased Lipid A modification of LPS or in increased gene expression of systems involved in AMP sensing and LPS modification. Therefore, despite the electrostatic targeting of LPS by GA as part of its activity, P. aeruginosa does not demonstrate LPS modification in its defence.

The limits of prediction: Why intrinsically disordered regions challenge our understanding of antimicrobial peptides

Antimicrobial peptides (AMPs) are molecules found in most organisms, playing a vital role in innate immune defense against pathogens. Their mechanism of action involves the disruption of bacterial cell membranes, causing leakage of cellular contents and ultimately leading to cell death. While AMPs typically lack a defined structure in solution, they often assume a defined conformation when interacting with bacterial membranes. Given this structural flexibility, we investigated whether intrinsically disordered regions (IDRs) with AMP-like properties could exhibit antimicrobial activity. We tested 14 peptides from different IDRs predicted to have antimicrobial activity and found that nearly all of them did not display the anticipated effects. These peptides failed to adopt a defined secondary structure and had compromised membrane interactions, resulting in a lack of antimicrobial activity. We hypothesize that evolutionary constraints may prevent IDRs from folding, even in membrane-like environments, limiting their antimicrobial potential. Moreover, our research reveals that current antimicrobial predictors fail to accurately capture the structural features of peptides when dealing with intrinsically unstructured sequences. Hence, the results presented here may have far-reaching implications for designing and improving antimicrobial strategies and therapies against infectious diseases.

Research on the antibacterial mechanism of medical nanosilver latex composite materials

Objective: This study investigates the antibacterial mechanisms of medical nanosilver latex materials by conducting antibacterial experiments on nanosilver latex, observing the morphological changes in Escherichia coli after co-cultivation with nanosilver, and detecting variations in nitric oxide, malondialdehyde, protein, and DNA fragment content. The aim is to provide a theoretical foundation for the application of antibacterial materials in medical settings.Methods: To prepare the composite latex film, nanosilver was combined with natural latex. The antibacterial efficacy of nanosilver latex were assessed using co-cultivation and colony counting methods. Electron microscopy facilitated the observation of Escherichia coli post co-cultivation with nanosilver, and subsequent changes in nitric oxide, malondialdehyde, protein, and DNA fragment content were measured.Results: The composite film of nanosilver latex demonstrated antibacterial properties, which were proportional to its concentration and inversely proportional to the particle size. Exposure to nanosilver resulted in bacterial cell membranes, leading to increased levels of nitric oxide, malondialdehyde, protein, and DNA content within bacteria.Conclusion: Nanosilver particles, especially those of 10 nm, were found to be most effective in antibacterial activity. The antibacterial effects were primarily due to the disruption of bacterial cell membranes and walls, altering intra and extracellular osmotic pressure, inducing lipid peroxidation of bacterial cell membranes, triggering of oxidative stress, and damage to DNA.

Phosphonium-Substituted Conjugated Polyelectrolytes Display Efficient Visible-Light-Induced Antibacterial Activity.

We report the light-activated antibacterial activity of a new class of phosphonium (R-PMe3+)-substituted conjugated polyelectrolytes (CPEs). These polyelectrolytes feature a poly(phenylene ethynylene) (PPE) conjugated backbone substituted with side groups with the structure -O-(CH2)nPMe3+, where n = 3 or 6. The length of the side groups has an effect on the hydrophobic character of the CPEs and their propensity to interact with bacterial membranes. In a separate study, these phosphonium-substituted PPE CPEs were demonstrated to photosensitize singlet oxygen (1O2) and reactive oxygen species, a key factor for the photoinduced inactivation of bacteria. In this study, in vitro antibacterial assays against Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus were performed by employing the series of polyelectrolytes under both dark and illumination conditions. In general, the phosphonium-substituted CPEs displayed profound light-activated biocidal activity, with >99% colony forming unit (CFU) reduction after 15 min of light exposure (16 mW cm-2) at a ≤20 μM CPE concentration. Strong biocidal activity was also observed in the dark for a CPE concentration of 20 μM against S. aureus; however, higher concentrations (200 μM) were needed to enable dark inactivation of E. coli. The dark activity is ascribed to bacterial membrane disruption by the CPEs, supported by a correlation of dark biocidal activity with the chain length of the side groups. The light-activated biocidal activity is associated with the ability of the CPEs to sensitize ROS, which is cytotoxic to the microorganisms. Serial dilution bacterial plating experiments revealed that the series of CPEs was able to induce a >5-log kill versus E. coli with 15 min of exposure to a blue LED source (16 mW cm-2).

Photodynamic inactivation of Listeria monocytogenes using a natural aggregation-induced emission photosensitizer and its application in salmon preservation

Photodynamic sterilization has been regarded as a promising alternative to conventional antibacterial approaches. However, the photodynamic efficiency of conventional photosensitizer is often compromised by aggregation-induced quenching effects. Photosensitizers, especially natural products, with aggregation-induced emission (AIE) properties open a new avenue for photodynamic sterilization. Herein, we investigated the photodynamic antibacterial performance and mechanism of the AIE-type natural product of berberine (BBR) against Listeria monocytogenes (L. monocytogenes). The bactericidal effect was assessed through the determination of minimum bactericidal concentration and implementation of anti-biofilm experiments. The results showed that BBR can significantly suppress the proliferation of L. monocytogenes and can efficiently remove the L. monocytogenes-derived biofilm in a concentration-dependent trend. The mechanism of killing L. monocytogenes has been speculated based on bacterial morphology characterization, viability staining results, enzyme activity assays, DNA electrophoresis analysis, and molecular docking. The excellent anti-bacterial activity of BBR mediated photodynamic process may account for its abilities to the irreversibly disruption of bacterial membrane, inhibition of intracellular enzyme activity and decomposition of intracellular DNA molecules. We also demonstrated that BBR embedded sodium alginate/chitosan packaging film is feasible to maintain the freshness of salmon under light illumination by inhibiting the bacterial proliferation.

Photo-triggered AuAg@g-C3N4 composite nanoplatform for multimodal broad-spectrum antibacterial therapy.

Strategies based on nanomaterials for sterilization address the problem of antibiotic resistance faced by conventional antimicrobials, with the contribution of photocatalytic compounds being particularly prominent. Herein, to integrate multiple bactericidal techniques into a system for generating synergistic antibacterial effects, a novel photo-triggered AuAg@g-C3N4 composite nanoplatform was constructed by anchoring AuAg on the surface of a g-C3N4 layer. As the composite nanoplatform had a lower bandgap and superior visible light utilization efficiency, it could facilitate free electron transfer better and exhibit superior photocatalytic activity under light conditions. Moreover, the AuAg@g-C3N4 composite nanoplatform integrated the bactericidal modes of silver ion toxicity, physical disruption of bacterial cell membranes by the multilayer structure, and excellent photocatalytic activity, exhibiting extremely superior bactericidal effects against Escherichia coli, Staphylococcus aureus, Pseudomonas aeruginosa and Bacillus subtilis, with a bactericidal efficiency of up to 100%.

Medicinal Herbs: Promising Immunomodulators for the Treatment of Infectious Diseases.

Humans are constantly at high risk of emerging pandemics caused by viral and bacterial infections. The emergence of new pandemics is mainly caused by evolved viruses and bacteria that are highly resistant to existing medications. The rapid evolution of infectious agents demands the urgent investigation of new therapeutic strategies to prevent and treat these infections at an early stage. One of these therapeutic strategies includes the use of medicinal herbs for their antibacterial and antiviral properties. The use of herbal medicines as remedies is very ancient and has been employed for centuries. Many studies have confirmed the antimicrobial activities of herbs against various pathogens in vitro and in vivo. The therapeutic effect of medicinal herbs is mainly attributed to the natural bioactive molecules present in these plants such as alkaloids, flavonoids, and terpenoids. Different mechanisms have been proposed for how medicinal herbs enhance the immune system and combat pathogens. Such mechanisms include the disruption of bacterial cell membranes, suppression of protein synthesis, and limitation of pathogen replication through the inhibition of nucleic acid synthesis. Medicinal herbs have been shown to treat a number of infectious diseases by modulating the immune system's components. For instance, many medicinal herbs alleviate inflammation by reducing pro-inflammatory cytokines (e.g., tumor necrosis factor-alpha (TNF-α), interleukin-1, IL-6) while promoting the production of anti-inflammatory cytokines (e.g., IL-10). Medicinal herbs also play a role in defense against viral and intracellular infections by enhancing the proliferation and functions of natural killer cells, T-helper-1 cells, and macrophages. In this review, we will explore the use of the most common herbs in preventing and treating infectious and non-infectious diseases. Using current and recently published studies, we focus on the immunomodulatory and therapeutic effects induced by medicinal herbs to enhance immune responses during diseases.

Mixed-valence gold-porphyrin two-dimensional coordination networks for repurposing of chrysotherapy

Catalytic gold nanomaterials typically exhibit antibacterial properties, albeit significantly weaker than ionic gold in chrysotherapy. The inherent stability of gold nanoparticles prevents the release of gold ions, limiting their ability to achieve efficient antibacterial therapy. To address this limitation, we propose a novel sustained ionic gold release strategy through the construction of a mixed-valence gold-porphyrin coordination network (Au-Por). By adjusting the ratio of Au to porphyrin molecule, an ultrathin two-dimensional Au-Por nanosheet was successfully synthesized, which contains 85.9 % of Au (III). In addition, the remaining gold existed in the form of uniformly distributed ultrasmall nanoclusters on the Au-Por nanosheet. Notably, the Au-Por nanosheet exhibited a sustained release of gold ions. Thus, a multimodal antibacterial therapy was achieved by integrating the direct bactericidal action of ionic gold and lethal reactive oxygen species (ROS) generated through the peroxidase (POD)-like activity of gold nanoclusters and photodynamic therapy (PDT) using porphyrins. The innovative Au-Por exerted broad-spectrum bactericidal activity against both Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus bacteria mediated by bacterial membrane disruption and DNA damage. Moreover, in vivo studies demonstrated the synergistic effect of Au-Por on combating skin wound infections and facilitating wound healing. Comprehensive safety evaluations proved that Au-Por exhibited no hematotoxicity or hepatorenal toxicity, and it also displayed rapid renal clearance after treatment, indicating favorable biocompatibility. The repurposing of chrysotherapy has revolutionized the antibacterial strategy of nanoscale gold, resulting in a dramatic boost in antibacterial activity and valuable insights for designing highly efficient nanoscale antibacterial agents.

Black Phosphorus-Based ZnO-Ag Nanocomposite for Antibacterial Activity against Tigecycline-Resistant Acinetobacter baumannii

Acinetobacter baumannii is a critically hard-to-treat gram-negative pathogen responsible for a range of infectious diseases. Tigecycline is a last-resort antibiotic for A. baumannii infection; however, tigecycline-resistant (TIG-R) A. baumannii has been increasingly reported. Therefore, new strategies must be developed to treat these detrimental infections. Nanoantibiotics composed of two-dimensional (2D) black phosphorus (BP) and its derived nanocomposites have emerged as excellent alternatives to current antibiotics. However, the development of unique materials to target specific pathogens is challenging. Here, we report the preparation of a BP-based ZnO-Ag (ZPBA) nanocomposite. A low-temperature solution synthesis method was used to prepare ZnO and Ag nanoparticles immobilized on BP nanosheets. X-ray diffraction, transmission electron microscopy, and X-ray photoelectron spectroscopy were used to characterize the ZPBA nanocomposite. The antibacterial activity of ZPBA nanocomposite was assessed by determining its minimum inhibitory concentration against type (ATCC 19606, ATCC 15150) and TIG-R (ATCC 19606-R) A. baumannii strains. From the assays, ZPBA showed superior activity against TIG-R A. baumannii strain with MIC of 12.5 µg·mL−1 compared to all other prepared samples. Finally, the combination of bacterial membrane disruption and ROS generation was demonstrated to be a potential antibacterial mechanism of ZPBA. Our results show that ZPBA could be a potential nanoantibiotic platform for eradicating TIG-R A. baumannii.

Antibacterial Gelatin Composite Hydrogels Comprised of In Situ Formed Zinc Oxide Nanoparticles.

We report the feasibility of using gelatin hydrogel networks as the host for the in situ, environmentally friendly formation of well-dispersed zinc oxide nanoparticles (ZnONPs) and the evaluation of the antibacterial activity of the as-prepared composite hydrogels. The resulting composite hydrogels displayed remarkable biocompatibility and antibacterial activity as compared to those in previous studies, primarily attributed to the uniform distribution of the ZnONPs with sizes smaller than 15 nm within the hydrogel network. In addition, the composite hydrogels exhibited better thermal stability and mechanical properties as well as lower swelling ratios compared to the unloaded counterpart, which could be attributed to the non-covalent interactions between the in situ formed ZnONPs and polypeptide chains. The presence of ZnONPs contributed to the disruption of bacterial cell membranes, the alteration of DNA molecules, and the subsequent release of reactive oxygen species within the bacterial cells. This chain of events culminated in bacterial cell lysis and DNA fragmentation. This research underscores the potential benefits of incorporating antibacterial agents into hydrogels and highlights the significance of preparing antimicrobial agents within gel networks.

Rational design and characterization of cell-selective antimicrobial peptides based on a bioactive peptide from Crocodylus siamensis hemoglobin

Antimicrobial resistance is a growing health concern. Antimicrobial peptides are a potential solution because they bypass conventional drug resistance mechanisms. Previously, we isolated a peptide from Crocodylus siamensis hemoglobin hydrolysate, which has antimicrobial activity and identified the main peptide from this mixture (QL17). The objective of this work was to evaluate and rationally modify QL17 in order to: (1) control its mechanism of action through bacterial membrane disruption; (2) improve its antimicrobial activity; and (3) ensure it has low cytotoxicity against normal eukaryotic cells. QL17 was rationally designed using physicochemical and template-based methods. These new peptide variants were assessed for: (1) their in vitro inhibition of microbial growth, (2) their cytotoxicity against normal cells, (3) their selectivity for microbes, and (4) the mode of action against bacteria using scanning electron microscopy (SEM), transmission electron microscopy (TEM) and confocal microscopy. The results indicate that all designed peptides have more potent antimicrobial efficacy than QL17 and IL15 peptides. However, only the most rationally modified peptides showed strong antimicrobial activity and minimal toxicity against normal cells. In particular, IL15.3 (hydrophobicity of 47% and net charge of + 6) was a potent antimicrobial agent (MIC = 4–12 μg/mL; MBC = 6–25 μg/mL) and displayed excellent selectivity for microbes (cf. human cells) via FACS assays. Microscopy confirmed that IL15.3 acts against bacteria by disrupting the cell membrane integrity and penetrating into the membrane. This causes the release of intracellular content into the outer environment leading to the death of bacteria. Moreover, IL15.3 can also interact with DNA suggesting it could have dual mode of action. Overall, a novel variant of QL17 is described that increases antimicrobial activity by over 1000-fold (~ 5 μg/mL MIC) and has minimal cytotoxicity. It may have applications in clinical use to treat and safeguard against bacteria.

Quantitative Imaging of the Action of vCPP2319, an Antimicrobial Peptide from a Viral Scaffold, against Staphylococcus aureus Biofilms of a Clinical Isolate.

The formation of biofilms is a common virulence factor that makes bacterial infections difficult to treat and a major human health problem. Biofilms are bacterial communities embedded in a self-produced matrix of extracellular polymeric substances (EPS). In this work, we show that vCPP2319, a polycationic peptide derived from the capsid protein of Torque teno douroucouli virus, is active against preformed Staphylococcus aureus biofilms produced by both a reference strain and a clinical strain isolated from a diabetic foot infection, mainly by the killing of biofilm-embedded bacteria. The direct effect of vCPP2319 on bacterial cells was imaged using atomic force and confocal laser scanning microscopy, showing that the peptide induces morphological changes in bacterial cells and membrane disruption. Importantly, vCPP2319 exhibits low toxicity toward human cells and high stability in human serum. Since vCPP2319 has a limited effect on the biofilm EPS matrix itself, we explored a combined effect with α-amylase (EC 3.2.1.1), an EPS matrix-degrading enzyme. In fact, α-amylase decreases the density of S.aureus biofilms by 2.5-fold. Nonetheless, quantitative analysis of bioimaging data shows that vCPP2319 partially restores biofilm compactness after digestion of the polysaccharides, probably due to electrostatic cross-bridging of the matrix nucleic acids, which explains why α-amylase fails to improve the antibacterial action of the peptide.

Poly(pentahydropyrimidine)‐Based Hybrid Hydrogel with Synergistic Antibacterial and Pro‐Angiogenic Ability for the Therapy of Diabetic Foot Ulcers

AbstractBacterial infection and impaired angiogenesis make the treatment of diabetic foot ulcers (DFU) extremely challenging. Cationic polymers are expected to treat infected wounds due to their excellent antibacterial properties, but still, it is difficult to meet the therapeutic needs of pro‐angiogenesis and anti‐infections due to their simple construction units and outmoded synthesis methods. Herein, a cationic poly(pentahydropyrimidine) (PPHP) library with strong modifiability is synthesized to construct a hybrid hydrogel with synergistic therapeutic effects for the treatment of infected DFUs. It is found that the as‐synthesized hybrid hydrogel can up‐regulate angiogenesis‐related gene (HIF‐1, VEGF, and bFGFR/bFGF) expression and targeted disruption of bacterial cell membranes, which finally promotes the healing of infected DFU (wound healing rate: 92%) within 10 days. This hydrogel, thus, holds great promise in developing new strategies to significantly enhance the treatment of DFU and other bacterial‐infected pathological diagnoses.

Main-Chain Cationic Bile Acid Polymers Mimicking Facially Amphiphilic Antimicrobial Peptides.

Antibiotic-resistant bacterial infections have led to an increased demand for antibacterial agents that do not contribute to antimicrobial resistance. Antimicrobial peptides (AMPs) with the facially amphiphilic structures have demonstrated remarkable effectiveness, including the ability to suppress antibiotic resistance during bacterial treatment. Herein, inspired by the facially amphiphilic structure of AMPs, the facially amphiphilic skeletons of bile acids (BAs) are utilized as building blocks to create a main-chain cationic bile acid polymer (MCBAP) with macromolecular facial amphiphilicity via polycondensation and a subsequent quaternization. The optimal MCBAP displays an effective activity against Gram-positive methicillin-resistant Staphylococcus aureus (MRSA) and Gram-negative Escherichia coli, fast killing efficacy, superior bactericidal stability in vitro, and potent anti-infectious performance in vivo using the MRSA-infected wound model. MCBAP shows the low possibility to develop drug-resistant bacteria after repeated exposure, which may ascribe to the macromolecular facial amphiphilicity promoting bacterial membrane disruption and the generation of reactive oxygen species. The easy synthesis and low cost of MCBAP, the superior antimicrobial performance, and the therapeutic potential in treating MRSA infection altogether demonstrate that BAs are a promising group of building blocks to mimic the facially amphiphilic structure of AMPs in treating MRSA infection and alleviating antibiotic resistance.

Boosting stability and therapeutic potential of proteolysis-resistant antimicrobial peptides by end-tagging β-naphthylalanine.

Recently, much emphasis has been placed on solvingthe intrinsic defects of antimicrobial peptides (AMPs), especially their susceptibility to protease digestion for the systemic application of antibacterial biomaterials. Although many strategies have increased the protease stability of AMPs, antimicrobial activity was severely compromised, thereby substantially weakening their therapeutic effect. To address this issue, we introduced hydrophobic group modifications at the N-terminus of proteolysis-resistant AMPs D1 (AArIIlrWrFR) through end-tagging with stretches of natural amino acids (W and I), unnatural amino acid (Nal) and fatty acids. Of these peptides, N1 tagged with a Nal at N-terminus showed the highest selectivity index (GMSI=19.59), with a 6.73-fold improvement over D1. In addition to potent broad-spectrum antimicrobial activity, N1 also exhibited high antimicrobial stability toward salts, serum and proteases in vitro and ideal biocompatibility and therapeutic efficacy in vivo. Furthermore, N1 killed bacteria through multiple mechanisms, involving disruption of bacterial membranes and inhibition of bacterial energy metabolism. Indeed, appropriate terminal hydrophobicity modification opens up new avenues for developing and applying high-stability peptide-based antibacterial biomaterials. STATEMENT OF SIGNIFICANCE: To improve the potency and stability of proteolysis-resistant antimicrobial peptides (AMPs) without increasing toxicity, we constructed a convenient and tunable platform based on different compositions and lengths of hydrophobic end modifications. By tagging an Nal at the N-terminal, the obtained target compound N1 exhibited strong antimicrobial activity and desirable stability under multifarious environments in vitro (proteases, salts and serum), and also showed favorable biocompatibility and therapeutic efficacy in vivo. Notably, N1 exerted its bactericidal effect by damaging bacterial cell membranes and inhibiting bacterial energy metabolism in a dual mode. The findings provide a potential method for designing or optimizing proteolysis-resistant AMPs thus promoting the development and application of peptide-based antibacterial biomaterial.

Histone acetyltransferases derived RW20 protects and promotes rapid clearance of Pseudomonas aeruginosa in zebrafish larvae.

Pseudomonas is a group of bacteria that can cause a wide range of infections, particularly in people with weakened immune systems, such as those with cystic fibrosis or who are hospitalized. It can also cause infections in the skin and soft tissue, including cellulitis, abscesses and wound infections. Antimicrobial peptides (AMPS) are the alternative strategy due to their broad spectrum of activity and act as effective treatment against multi-drug resistance pathogens. In this study, we have used an AMP, RW20 (1RPVKRKKGWPKGVKRGPPKW20). RW20 peptide is derived from the histone acetyltransferases (HATs) of the freshwater teleost, Channa striatus. The antimicrobial prediction tool has been utilized to identify the RW20 sequence from the HATs sequence. We synthesized the peptide to explore its mechanism of action. In an in vitro assay, RW20 was challenged against P. aeruginosa and we showed that RW20 displayed antibacterial properties and damaged the cell membrane. The mechanism of action of RW20 against P. aeruginosa has been established via field emission scanning electron microscopy (FESEM) as well as fluorescence assisted cell sorter (FACS) analysis. Both these experiments established that RW20 caused bacterial membrane disruption and cell death. Moreover, the impact of RW20, in-vivo, was tested against P. aeruginosa-infected zebrafish larvae. In the infected larvae, RW20 showed protective effect against P. aeruginosa by increasing the larval antioxidant enzymes, reducing the excess oxidative stress and apoptosis. Thus, it is possible that HATs-derived RW20 can be an efficient antimicrobial molecule against P. aeruginosa.

Synthetic Star Nanoengineered Antimicrobial Polymers as Antibiofilm Agents: Bacterial Membrane Disruption and Cell Aggregation.

Antimicrobial resistance has become a worldwide issue, with multiresistant bacterial strains emerging at an alarming rate. Multivalent antimicrobial polymer architectures such as bottle brush or star polymers have shown great potential, as they could lead to enhanced binding and interaction with the bacterial cell membrane. In this study, a library of amphiphilic star copolymers and their linear copolymer equivalents, based on acrylamide monomers, were synthesized via RAFT polymerization. Their monomer distribution and molecular weight were varied. Subsequently, their antimicrobial activity toward a Gram-negative bacterium (Pseudomonas aeruginosa PA14) and a Gram-positive bacterium (Staphylococcus aureus USA300) and their hemocompatibility were investigated. The statistical star copolymer, S-SP25, showed an improved antimicrobial activity compared to its linear equivalent againstP. aeruginosaPA14. The star architecture enhanced its antimicrobial activity, causing bacterial cell aggregation, as revealed via electron microscopy. However, it also induced increased red blood cell aggregation compared to its linear equivalents. Changing/shifting the position of the cationic block to the core of the structure prevents the cell aggregation effect while maintaining a potent antimicrobial activity for the smallest star copolymer. Finally, this compound showed antibiofilm properties against a robust in vitro biofilm model.

Disassembling ability of lipopeptide promotes the antibacterial activity

Lipopeptides have become one of the most potent antibacterial agents, however, there is so far no consensus about the link between their physic-chemical properties and biological activity, in particular their inherent aggregation propensity and antibacterial potency. To this end, we here de novo design a series of lipopeptides (CnH(2n-1)O-(VVKK)2V-NH2), in which an alkyl chain is covalently attached onto the N-terminus of a short cationic peptide sequence with an alternating pattern of hydrophobic VV (Val) and positively charged KK (Lys) motifs. By varying the alkyl chain length (ortho-octanoic acid (C8), lauric acid (C12), and palmitic acid (C16)), the lipopeptides show distinct physicochemical properties and self-assembly behaviors, which have great effect on their antibacterial activities. C8H15O-(VVKK)2V-NH2, which contains the lowest hydrophobicity and surface activity has the lowest antibacterial activity. C12H23O-(VVKK)2V-NH2 and C16H31O-(VVKK)2V-NH2 both have high hydrophobicity and surface activity, and self-assembled into long nanofibers. However, the nanofibers formed by C12H23O-(VVKK)2V-NH2 disassembled by dilution, resulting in its high antibacterial activity via bacterial membrane disruption. Comparatively, the nanofibers formed by C16H31O-(VVKK)2V-NH2 were very stable, which can closely attach on bacterial surface but not permeate bacterial membrane, leading to its low antibacterial activity. Thus, the stability other than the morphologies of lipopeptides’ nanostructures contribute to their antibacterial ability. Importantly, this study enhances our understanding of the antibacterial mechanisms of self-assembling lipopeptides that will be helpful in exploring their biomedical applications.

Antimicrobial Property of Silver Nanoparticles: Effects of Concentration and Temperature on Bacterial Isolates

Importance of hospital environment in patient-care has been recognized widely in infection prevention and control. Inappropriate antibiotic use led to emergence of resistant strains that are difficult to treat with the available antibiotics. Progress in nanotechnology led to enhancement of nanoparticles with physicochemical characteristics and functionality that overcomes the constraints of common antimicrobials. Aim was to investigate effective antimicrobial role of Silver nanoparticle (Ag-NPs) against clinically important bacterial strains and observe effects of varying storage temperatures on Ag-NPs antimicrobial activity. Different concentrations of Ag-NPs were tested against Escherichia coli, Staphylococcus aureus, Pseudomonas aeruginosa and Acinetobacter baumannii using diffusion method. Zone of inhibition (ZOI) for each organism was directly proportional to concentration of Ag-NPs used. Mean ZOI values at different concentrations were significantly different for all organisms with p-value <0.001 for E. coli, S. aureus, P. aeruginosa and 0.004 for A. baumannii. Variation in storage temperature hardly showed any effects on the antimicrobial property of the Ag-NPs. Scanning electron microscopy (SEM) showed morphological and size variations in Ag-NPs exposed cells when compared to control strains, especially for S. aureus, E. coli and P. aeruginosa. Damaged cell membrane areas can be clearly distinguished in E. coli and P. aeruginosa thus suggesting bacterial membrane disruption. These finding can help design a larger study where Ag-NPs can be used in various medical instruments which are usually kept at room temperatures. Also, outcomes of this study may help in designing proper implants, prosthesis and equipment coated with minimum concentration of nanoparticles that might be considered safe for medical applications.