Bacteria In Environmental Samples Research Articles

Proficiency testing schemes for the assessment of Legionella PCR methodologies

Standard operating procedures used for the detection of bacteria in environmental samples are primarily based on bacterial growth on specific culture media and confirmation by biochemical and/or immunological tests. In the case of Legionella, isolation on BCYE-α medium is the standard method, although it presents a number of drawbacks, and for this reason, the implementation of molecular methods, mainly those based on PCR, has increased over the last years. Following the ISO/IEC 17025, laboratories need an external evaluation of their work to assure the quality of the results they are producing, and the participation in proficiency testing (PT) schemes is compulsory. For those water-testing laboratories using PCR methods for Legionella, we have developed a PT scheme accredited according to ISO/IEC 17043. The preparation and the statistical analysis of the results are performed following this standard and the ISO 13528. The used samples have a very rapid and easy to use format, consisting of tablets with inactivated freeze-dried Legionella cells or freeze-dried Legionella DNA. In this PT scheme, participants evaluate both Legionella pneumophila and Legionella spp. detection systems and control the whole PCR process from the water sample concentration until the PCR results.

Are uncultivated bacteria really uncultivable?

Many strategies have been used to increase the number of bacterial cells that can be grown from environmental samples but cultivation efficiency remains a challenge for microbial ecologists. The difficulty of cultivating a fraction of bacteria in environmental samples can be classified into two non-exclusive categories. Bacterial taxa with no cultivated representatives for which appropriate laboratory conditions necessary for growth are yet to be identified. The other class is cells in a non-dividing state (also known as dormant or viable but not culturable cells) that require the removal or addition of certain factors to re-initiate growth. A number of strategies, from simple to high throughput techniques, are reviewed that have been used to increase the cultivation efficiency of environmental samples. Some of the underlying mechanisms that contribute to the success of these cultivation strategies are described. Overall this review emphasizes the need of researchers to first understand the factors that are hindering cultivation to identify the best strategies to improve cultivation efficiency.

Dissemination of NDM-1 positive bacteria in the New Delhi environment and its implications for human health: an environmental point prevalence study

Not all patients infected with NDM-1-positive bacteria have a history of hospital admission in India, and extended-spectrum β-lactamases are known to be circulating in the Indian community. We therefore measured the prevalence of the NDM-1 gene in drinking water and seepage samples in New Delhi. Swabs absorbing about 100 μL of seepage water (ie, water pools in streets or rivulets) and 15 mL samples of public tap water were collected from sites within a 12 km radius of central New Delhi, with each site photographed and documented. Samples were transported to the UK and tested for the presence of the NDM-1 gene, bla(NDM-1), by PCR and DNA probing. As a control group, 100 μL sewage effluent samples were taken from the Cardiff Wastewater Treatment Works, Tremorfa, Wales. Bacteria from all samples were recovered and examined for bla(NDM-1) by PCR and sequencing. We identified NDM-1-positive isolates, undertook susceptibility testing, and, where appropriate, typed the isolates. We undertook Inc typing on bla(NDM-1)-positive plasmids. Transconjugants were created to assess plasmid transfer frequency and its relation to temperature. From Sept 26 to Oct 10, 2010, 171 seepage samples and 50 tap water samples from New Delhi and 70 sewage effluent samples from Cardiff Wastewater Treatment Works were collected. We detected bla(NDM-1) in two of 50 drinking-water samples and 51 of 171 seepage samples from New Delhi; the gene was not found in any sample from Cardiff. Bacteria with bla(NDM-1) were grown from 12 of 171 seepage samples and two of 50 water samples, and included 11 species in which NDM-1 has not previously been reported, including Shigella boydii and Vibrio cholerae. Carriage by enterobacteria, aeromonads, and V cholera was stable, generally transmissible, and associated with resistance patterns typical for NDM-1; carriage by non-fermenters was unstable in many cases and not associated with typical resistance. 20 strains of bacteria were found in the samples, 12 of which carried bla(NDM-1) on plasmids, which ranged in size from 140 to 400 kb. Isolates of Aeromonas caviae and V cholerae carried bla(NDM-1) on chromosomes. Conjugative transfer was more common at 30°C than at 25°C or 37°C. The presence of NDM-1 β-lactamase-producing bacteria in environmental samples in New Delhi has important implications for people living in the city who are reliant on public water and sanitation facilities. International surveillance of resistance, incorporating environmental sampling as well as examination of clinical isolates, needs to be established as a priority. European Union.

Quantification of Propionibacterium acidipropionici P169 Bacteria in Environmental Samples by Use of Strain-Specific Primers Derived by Suppressive Subtractive Hybridization

A quantitative PCR (qPCR) assay targeting a gene identified by suppressive subtractive hybridization (SSH) was developed to detect Propionibacterium acidipropionici P169, with a threshold of 10(4) CFU/U of dairy feed or rumen fluid. The report is the first using a molecular marker generated by SSH to quantify a bacterial strain in environmental samples.

Simultaneous PCR Detection of Multiple Classes of Integron Integrase Genes for Determining the Presence of Multidrug-Resistant Bacteria in Environmental Samples

Dissemination of multidrug-resistant bacteria, particularly in hospitals, has become a serious public health problem. Integrons impart antibiotic multidrug resistance in gram-negative and some gram-positive bacteria by capturing and then disseminating antibiotic resistance genes. This mechanism plays a major role in contributing to the alarmingly high prevalence of bacterial drug resistance. A universal polymerase chain reaction (PCR) primer set was attempted to design to more sensitively and specifically detect integrons in environmental samples. One set, designated intCiF3(a), intCiF3(b), intCiiiR3(a), and intCiiiR3(b), simultaneously amplifies the conserved region of the tyrosine recombinase gene family between box I and box II. This primer set generates PCR products derived from classes 1, 2, and 3 integron integrases from environmental samples such as wastewater. An unexpected finding of this study was the detection of new putative integron integrase gene sequences. This is the subject of ongoing research, which aims to provide a clear understanding of the risk to human health posed by these genetic elements.

Diversity of hydrogen-producing bacteria in environmental samples

Diversity of hydrogen-producing bacteria in environmental samples

Environmental Reservoirs for Enterotoxigenic Escherichia coli in South Asian Gangetic Riverine System

Forecasting diarrheagenic E. coli contamination of aquatic resources to prevent outbreaks largely depends on rapid and accurate diagnostic testing in a few hours. Real-time PCR is widely used for quick culture-free quantitative enumeration of pathogenic bacteria in environmental samples. In this study, real-time PCR in molecular beacon format was used for detection and culture-free quantitative enumeration of enterotoxigenic Escherichia coli (ETEC) harboring LT1 gene in a sewage-impacted south Asian Gangetic riverine system. The quantitative budget for ETEC in surface water was observed to vary significantly (DMRT, p < 0.05) among the sites. Aquatic flora (Eichhornia crassipes, Potamogeton crispus, Potamogeton pectinatus, Ranunculus sceleratus, Polygonum glabrum, Pontederia cordata, Najas indica and strands of Spirogyra spp.) collected between sites 1 and 9 exhibited significant high levels of ETEC in comparison to their representatives collected from pristine area. The level of ETEC harboring LT1 gene observed in leafy vegetables cultivated along the banks was in the following order: mint leaves > coriander > spinach > methi leaves. The study suggests that the aquatic flora and cultivated leafy vegetables in the south Asian Gangetic riverine system are environmental reservoirs for enterotoxigenic Escherichia coli.

Further limitations of phylogenetic group-specific probes used for detection of bacteria in environmental samples

Further limitations of phylogenetic group-specific probes used for detection of bacteria in environmental samples

Rapid detection of Escherichia coli in water using a hand-held fluorescence detector

The quantification of pathogenic bacteria in an environmental or clinical sample commonly involves laboratory-based techniques and results are not obtained for 24–72 h after sampling. Enzymatic analysis of microbial activity in water and other environmental samples using fluorescent synthetic substrates are well-established and highly sensitive methods in addition to providing a measure of specificity towards indicative bacteria. The enzyme β- d-glucuronidase (GUD) is a specific marker for Escherichia coli and 4-methylumbelliferone-β- d-glucuronide (MUG) a sensitive substrate for determining the presence of E. coli in a sample. However, currently used procedures are laboratory-based and require bench-top fluorimeters for the measurement of fluorescence resulting from the enzyme–substrate reaction. Recent developments in electronic engineering have led to the miniaturisation of fluorescence detectors. We describe the use of a novel hand-held fluorimeter to directly analyse samples obtained from the River Thames for the presence of E. coli. The results obtained by the hand-held detector were compared with those obtained with an established fluorescent substrate assay and by quantifying microbial growth on a chromogenic medium. Both reference methods utilised filtration of water samples. The miniaturised fluorescence detector was used and incubation times reduced to 30 min making the detection system portable and rapid. The developed hand-held system reliably detected E. coli as low as 7 cfu/mL river water sample. Our study demonstrates that new hand-held fluorescence measurement technology can be applied to the rapid and convenient detection of bacteria in environmental samples. This enables rapid monitoring to be carried out on-site. The technique described is generic and it may, therefore, be used in conjunction with different fluorescent substrates which allows the assessment of various target microorganisms in biological samples.

Preparation of Genomic DNA from a Single Species of Uncultured Magnetotactic Bacterium by Multiple-Displacement Amplification

Magnetotactic bacteria comprise a phylogenetically diverse group that is capable of synthesizing intracellular magnetic particles. Although various morphotypes of magnetotactic bacteria have been observed in the environment, bacterial strains available in pure culture are currently limited to a few genera due to difficulties in their enrichment and cultivation. In order to obtain genetic information from uncultured magnetotactic bacteria, a genome preparation method that involves magnetic separation of cells, flow cytometry, and multiple displacement amplification (MDA) using phi29 polymerase was used in this study. The conditions for the MDA reaction using samples containing 1 to 100 cells were evaluated using a pure-culture magnetotactic bacterium, "Magnetospirillum magneticum AMB-1," whose complete genome sequence is available. Uniform gene amplification was confirmed by quantitative PCR (Q-PCR) when 100 cells were used as a template. This method was then applied for genome preparation of uncultured magnetotactic bacteria from complex bacterial communities in an aquatic environment. A sample containing 100 cells of the uncultured magnetotactic coccus was prepared by magnetic cell separation and flow cytometry and used as an MDA template. 16S rRNA sequence analysis of the MDA product from these 100 cells revealed that the amplified genomic DNA was from a single species of magnetotactic bacterium that was phylogenetically affiliated with magnetotactic cocci in the Alphaproteobacteria. The combined use of magnetic separation, flow cytometry, and MDA provides a new strategy to access individual genetic information from magnetotactic bacteria in environmental samples.

Development of a new reference material for the validation of molecular detection methods for microbiological analysis

The standard methodology used for the detection of bacteria in environmental samples and food is primarily based on bacterial growth on specific culture media and confirmation by biochemical and/or immunological tests of all presumptive colonies. However, this methodology presents a number of drawbacks, such as low sensitivity and specificity, and the long time needed to obtain results. For this reason, the implementation of molecular methods in diagnostic laboratories has increased over the past several years. Nevertheless, most of these newer methods have not been included in current legislation, and, in most of cases, they have not yet been normalized. In this sense, the availability of appropriate reference materials (RMs) can help to overcome these deficiencies. The aim of this study was to develop and validate, following ISO Guide 34, a new RM, in a tablet format, for the quantification of Legionella pneumophila and Salmonella spp. by quantitative PCR (qPCR). This new RM can be used as a work reference sample in internal quality control, in the organization of proficiency testing schemes (PTS), as well as for the validation of molecular methods based on qPCR.

Phenotypic and genotypic bacterial antimicrobial resistance in liquid pig manure is variously associated with contents of tetracyclines and sulfonamides

Antibiotic residues as well as antibiotic-resistant bacteria in environmental samples might pose a risk to human health. This study aimed to investigate the association between antibiotic residues and bacterial antimicrobial resistance in liquid pig manure used as fertilizer. Concentrations of tetracyclines (TETs) and sulfonamides (SULs) were determined by liquid chromatography-mass spectrometry in 305 pig manure samples; antibiotic contents were correlated to the phenotypic resistance of Escherichia coli (n = 613) and enterococci (n = 564) towards up to 24 antibiotics. In 121 samples, the concentration of the TET resistance genes tet(M), tet(O) and tet(B) was quantified by real-time-PCR. TETs were found in 54% of the samples. The median sum concentration of all investigated TETs in the positive samples was 0.73 mg kg(-1). SULs were found with a similar frequency (51%) and a median sum concentration of 0.15 mg kg(-1) in the positive samples. Associated with the detection of TETs and/or SULs, resistance rates were significantly elevated for several substances - some of them not used in farm animals, e.g. chloramphenicol and synercid. In addition, multiresistant isolates were found more often in samples containing antibiotics. Analysis of the resistance genes tet(M) and tet(O) already showed a significant increase in their concentrations - but not in tet(B) - in the lowest range of total TET concentration. Mean tet(M) concentrations increased by the factor of 4.5 in the TET concentration range of 0.1-1 mg kg(-1), compared to negative manure samples. Antibiotic contamination of manure seems to be associated with a variety of changes in bacterial resistance, calling for a prudent use of antibiotics in farm animals. This study provides an interdisciplinary approach to assess antimicrobial resistance by combining the microbiological analysis of bacterial resistance with high quality chemical analysis of antibiotic residues in a representative number of environmental samples.

Quantification of anaerobic ammonium-oxidizing bacteria in enrichment cultures by quantitative competitive PCR

The anaerobic ammonium-oxidizing (ANAMMOX) bacteria were enriched from a sequencing batch biofilm reactor (SBBR). A quantitative competitive polymerase chain reaction (QC-PCR) system was successfully developed to detect and quantify ANAMMOX bacteria in environmental samples. For QC-PCR system, PCR primer sets targeting 16S ribosomal RNA genes of ANAMMOX bacteria were designed and used. The quantification range of this system was 4 orders of magnitude, from 10(3) to 10(6) copies per PCR, corresponding to the detection limit of 300 target copies per mL. A 312-bp internal standard was constructed, which showed very similar amplification efficiency with the target amxC fragment (349 bp) over 4 orders of magnitude (10(3)-10(6)). The linear regressions were obtained with R2 of 0.9824 for 10(3) copies, 0.9882 for 10(4) copies, 0.9857 for 10(5) copies and 0.9899 for 10(6) copies, respectively. Using this method, ANAMMOX bacteria were quantified in a shortcut nitrification/denitrification-anammox system which was set for piggery wastewater treatment.

Application of real-time PCR for total airborne bacterial assessment: Comparison with epifluorescence microscopy and culture-dependent methods

Traditional culture-dependent methods to quantify and identify airborne microorganisms are limited by factors such as short-duration sampling times and inability to count non-culturable or non-viable bacteria. Consequently, the quantitative assessment of bioaerosols is often underestimated. Use of the real-time quantitative polymerase chain reaction (Q-PCR) to quantify bacteria in environmental samples presents an alternative method, which should overcome this problem. The aim of this study was to evaluate the performance of a real-time Q-PCR assay as a simple and reliable way to quantify the airborne bacterial load within poultry houses and sewage treatment plants, in comparison with epifluorescence microscopy and culture-dependent methods. The estimates of bacterial load that we obtained from real-time PCR and epifluorescence methods, are comparable, however, our analysis of sewage treatment plants indicate these methods give values 270–290 fold greater than those obtained by the “impaction on nutrient agar” method. The culture-dependent method of air impaction on nutrient agar was also inadequate in poultry houses, as was the impinger-culture method, which gave a bacterial load estimate 32-fold lower than obtained by Q-PCR. Real-time quantitative PCR thus proves to be a reliable, discerning, and simple method that could be used to estimate airborne bacterial load in a broad variety of other environments expected to carry high numbers of airborne bacteria.

Evaluation of PCR Primer Selectivity and Phylogenetic Specificity by Using Amplification of 16S rRNA Genes from Betaproteobacterial Ammonia-Oxidizing Bacteria in Environmental Samples

The effect of primer specificity for studying the diversity of ammonia-oxidizing betaproteobacteria (betaAOB) was evaluated. betaAOB represent a group of phylogenetically related organisms for which the 16S rRNA gene approach is especially suitable. We used experimental comparisons of primer performance with water samples, together with an in silico analysis of published sequences and a literature review of clone libraries made with four specific PCR primers for the betaAOB 16S rRNA gene. With four aquatic samples, the primers NitA/NitB produced the highest frequency of ammonia-oxidizing-bacterium-like sequences compared to clone libraries with products amplified with the primer combinations betaAMOf/betaAMOr, betaAMOf/Nso1255g, and NitA/Nso1225g. Both the experimental examination of ammonia-oxidizing-bacterium-specific 16S rRNA gene primers and the literature search showed that neither specificity nor sensitivity of primer combinations can be evaluated reliably only by sequence comparison. Apparently, the combination of sequence comparison and experimental data is the best approach to detect possible biases of PCR primers. Although this study focused on betaAOB, the results presented here more generally exemplify the importance of primer selection and potential primer bias when analyzing microbial communities in environmental samples.

DNA signatures for detecting genetic engineering in bacteria

New computational tools were used to find a robust set of DNA oligomers that can distinguish artificial vector sequences from all available background viral and bacterial genomes.

Luminex detection of fecal indicators in river samples, marine recreational water, and beach sand

Research to understand and remediate coastal pollution is moving toward a multitiered approach in which traditional enumeration of fecal indicators is accompanied by molecular analysis of a variety of targets. Technology that rapidly detects multiple microbial contaminants would benefit from such an approach. The Luminex ® 100™ system is a suspension array that assays multiple analytes rapidly in a single well of a microtiter plate. The ability of the system to simultaneously detect multiple fecal indicating bacteria in environmental samples was tested. Primer/probe sets were designed to simultaneously detect the following fecal indicators: the Bacteroides fragilis group, Enterococcus spp., Escherichia coli and Shigella spp., Bacteroides distasonis, and Ent. faecalis. Specificity and sensitivity of the Luminex probes was tested against laboratory cultures. In addition, sequencing, culture plate testing, and specificity testing with environmental isolates were steps taken to validate the function of the assay with environmental samples. Luminex response to cultures and to environmental samples was consistent with sequencing results, suggesting that the technology has the potential to simultaneously detect multiple targets for coastal water quality applications, particularly as progress is made to efficiently extract DNA from water and sediment matrices.

Improved Fluorescent In Situ Hybridization Method for Detection of Bacteria from Activated Sludge and River Water by Using DNA Molecular Beacons and Flow Cytometry

Fluorescent in situ hybridization (FISH) remains a key technique in microbial ecology. Molecular beacons (MBs) are self-reporting probes that have potential advantages over linear probes for FISH. MB-FISH strategies have been described using both DNA-based and peptide nucleic acid (PNA)-based approaches. Although recent reports have suggested that PNA MBs are superior, DNA MBs have some advantages, most notably cost. The data presented here demonstrate that DNA MBs are suitable for at least some FISH applications in complex samples, providing superior discriminatory power compared to that of corresponding linear DNA-FISH probes. The use of DNA MBs for flow cytometric detection of Pseudomonas putida resulted in approximately double the signal-to-noise ratio of standard linear DNA probes when using laboratory-grown cultures and yielded improved discrimination of target cells in spiked environmental samples, without a need for separate washing steps. DNA MBs were also effective for the detection and cell sorting of both spiked and indigenous P. putida from activated sludge and river water samples. The use of DNA MB-FISH presents another increase in sensitivity, allowing the detection of bacteria in environmental samples without the expense of PNA MBs or multilaser flow cytometry.

Application of flow cytometry and cell sorting to the bacterial analysis of environmental aerosol samples

Flow cytometry (FCM) combined with viability staining is a useful tool in discerning viable bacteria in environmental samples where traditional culture methods may fail. Contamination of aerosol samples with dust and other non-biological particles can interfere with accurate sample analysis and therefore there is a desire to exclude those particles from analysis. Particles were sorted according to their light scattering properties, cultured and isolates obtained. Isolates were cultured in suspension and reanalyzed by flow cytometry. The isolates were also analyzed and identified by DNA sequence analysis. Isolates with statistically similar light scattering properties shared common sequence identification. Isolates exhibited distinct light scattering profiles that roughly correlated with their originating gate, but often the peak of the profile was outside that gate.

A high throughput membrane BIO‐PCR technique for ultra‐sensitive detection of Pseudomonas syringae pv. phaseolicola

Molecular‐based methods such as PCR have greatly improved detection of bacteria in environmental samples. However, the sensitivity of PCR is not high when compared to agar plating assays, and inhibitors from plants are often a problem. Pre‐enriching bacteria on agar media (BIO‐PCR) can increase the sensitivity of PCR by more than 100% and reduce the effects of inhibitors. To further increase the sensitivity and also reduce the labour needed for BIO‐PCR, a high throughput 96‐well membrane BIO‐PCR technique is described for ultra‐sensitive detection of Pseudomonas syringae pv. phaseolicola (PSP) (syn. P. phaseolicola) in washings of seeds and leaves of Phaseolus vulgaris, using available classical PCR primers and newly designed real‐time primers and probe. The primers and probe, designed from a tox‐argK chromosomal cluster of the PSP‐specific phaseolotoxin gene, were confirmed to be specific to PSP. Samples (1·2 mL) were filtered under vacuum in 96‐well membrane plates. After incubating on soft agar medium for 48–52 h, each well is washed with 200 µL of sterile water and used immediately for nested (two‐step) PCR or real‐time PCR or stored at −20°C. Results of assaying spiked seed washings showed that classical PCR was unable to detect PSP at mean concentrations of 40 colony forming units (cfu) mL−1. BIO‐PCR detected PSP in five out of six samples at 40 mean cfu mL−1 but none at mean concentrations of 4·2 and 0·4 mean cfu mL−1. In contrast, membrane BIO‐PCR detected the bacterium in all six samples tested containing as few as 0·4 mean cfu mL−1. The sensitivity of detection from leaf washings was lower but the results were similar, classical and BIO‐PCR were negative from all three levels of inoculum while membrane BIO‐PCR detected three out of three samples at 80 mean cfu mL−1 and one out of three at 40 mean cfu mL−1.