Azide Moiety Research Articles

"CHicable" and "Clickable" Copolymers for Network Formation and Surface Modification.

In this study, we present the generation of novel, multifunctional polymer networks through a combination of C,H-insertion cross-linking (CHic) and click chemistry. To this, copolymers consisting of hydrophilic N,N-dimethylacrylamide as matrix component and repeat units containing azide moieties, as well as benzophenone or anthraquinone groups, are generated. The benzophenone or anthraquinone groups allow photo-cross-linking, surface attachment or covalent immobilization of adjacent (bio)molecules through CHic reactions. The azide moieties either can react with available alkynes through conventional click reactions or can be activated to form nitrenes, which can also undergo CHic reactions. By choosing appropriate reaction conditions, the same polymer can be used to follow very different reaction paths, opening up a plethora of choices for the generation of functional polymer networks. In the exemplary presented case ("CHic-Click"), irradiation of the copolymers with UV-A light (λirr = 365 nm) leads to cross-linking (network formation) and surface attachment simultaneously. The azide units remain intact during this cross-linking step, and alkyne-modified (bio)molecules can be bound through click reactions. Biofunctionalization of the polymer network with alkynylated streptavidin, followed by application of biotin-conjugated antibody and a model analyte, highlights the potential of these surface architectures as a toolbox which can be adapted for diverse bioanalytical applications.

Maximizing Conversion of Surface Click Reactions for Versatile Molecular Modification on Metal Oxide Nanowires.

Click reactions (e.g., Huisgen cycloaddition) on metal oxide nanostructures offer a versatile and robust surface molecular modification for various applications because they form strong covalent bonds in a wide range of molecular substrates. This study reports a rational strategy to maximize the conversion rate of surface click reactions on single-crystalline ZnO nanowires by monitoring the reaction progress. p-Polarized multiple-angle incidence resolution spectrometry (pMAIRS) and Fourier-transformed infrared (FT-IR) spectroscopy were employed to monitor the reaction progress of an azide-terminated self-assembled monolayer (SAM) on single-crystalline ZnO nanowires. Although various reaction parameters including the concentration of Cu(I) catalysts, triazolyl ligands, solvents, and target alkynes were systematically examined for the surface click reactions, 10-30% of terminal azide on the nanowire surface remained unreacted. Temperature-dependent FT-IR measurements revealed that such unreacted residual azides deteriorate the thermal stability of the nanowire molecular layer. To overcome this observed conversion limitation of click reactions on nanostructure surfaces, we considered the steric hindrance around the closely packed SAM reaction points, then experimented with dispersing the azide moiety into a methyl-terminated SAM. The mixed-SAM method significantly improved the azide conversion rate to almost 100%. This reaction method enables the construction of spatially patterned molecular surface modifications on metal oxide nanowire arrays without detrimental unreacted azide groups.

Stereoselective and Stereospecific Triflate‐Mediated Intramolecular Schmidt Reaction: Ready Access to Alkaloid Skeletons**

AbstractThe stereoselectivity and stereospecificity of the triflate‐mediated intramolecular Schmidt reaction of substituted 3‐(1‐azidocyclohexyl)propanol derivatives leading to octahydro‐1H‐pyrrolo[1,2‐a]azepine, the structural skeleton of several important families of alkaloids such as the Stemona alkaloids, has been examined. The reaction involves an initial intramolecular SN2 reaction between the azide moiety and the triflate affording an intermediate spirocyclic aminodiazonoium salt that undergoes the expected 1,2‐shift/N2‐elimination followed by hydride‐mediated iminium salt reduction. Remarkably, chiral alcohols are converted to the azabicyclic derivative with no or limited racemization. The initial asymmetric alcohol center controls the diastereoselectivity of the whole process, leading to the formation of one out of the four possible diastereoisomers of disubstituted octahydro‐1H‐pyrrolo[1,2‐a]azepine. The origin of the stereoselectivity is rationalized based on theoretical calculations. The concise synthesis of (−)‐(cis)‐3‐propylindolizidine and (−)‐(cis)‐3‐butyllehmizidine, two alkaloids found in the venom of workers of the ant Myrmicaria melanogaster, is reported.

Stereoselective and Stereospecific Triflate-Mediated Intramolecular Schmidt Reaction: Ready Access to Alkaloid Skeletons*.

The stereoselectivity and stereospecificity of the triflate‐mediated intramolecular Schmidt reaction of substituted 3‐(1‐azidocyclohexyl)propanol derivatives leading to octahydro‐1H‐pyrrolo[1,2‐a]azepine, the structural skeleton of several important families of alkaloids such as the Stemona alkaloids, has been examined. The reaction involves an initial intramolecular SN2 reaction between the azide moiety and the triflate affording an intermediate spirocyclic aminodiazonoium salt that undergoes the expected 1,2‐shift/N2‐elimination followed by hydride‐mediated iminium salt reduction. Remarkably, chiral alcohols are converted to the azabicyclic derivative with no or limited racemization. The initial asymmetric alcohol center controls the diastereoselectivity of the whole process, leading to the formation of one out of the four possible diastereoisomers of disubstituted octahydro‐1H‐pyrrolo[1,2‐a]azepine. The origin of the stereoselectivity is rationalized based on theoretical calculations. The concise synthesis of (−)‐(cis)‐3‐propylindolizidine and (−)‐(cis)‐3‐butyllehmizidine, two alkaloids found in the venom of workers of the ant Myrmicaria melanogaster, is reported.

Efficient methods of surface functionalization of lignocellulosic waste toward surface clickability enhancement

ABSTRACT This work targets the development of a pioneering synthetic strategy to modify the surface of lignocellulosic/natural filler material abundant in date palm pedicels by incorporating azide and alkyne moieties with the aid of microwave as a heating source. The novelty of this work is originated from the fact that functionalization was achieved, in both cases, using shorter modification path within short time. The developed technique takes into consideration the environmental regulations by endorsing the use of green chemistry toward fast and simple materials synthesize that can be widely used industrially. The functionalized material can be utilized as an intermediate product for several modern applications such as click chemistry and bio-composite production. The modified materials were characterized using Fourier transform infrared, solid-state 13C nuclear magnetic resonance (ssNMR), x-ray diffraction (XRD), and thermo-gravimetric analysis (TGA). Characterization techniques provide evidence that the functional groups were successfully incorporated in the natural filler which depicts that the used functionalization technique is effective in providing a trouble-free route toward natural filler modification. Thereby, the findings of this work provide a new opportunity for using click chemistry approach to fabricate cost-effective and sustainable bio-composite materials.

Facile fabrication of polymer network using click chemistry and their computational study.

Click reaction is a very fast, high yield with no by-product, biocompatible, tolerant to surrounded medium, and very specific cycloaddition reaction between azides and alkynes to form triazole. They are widely being employed in the synthesis of various polymeric materials. Here, the design, fabrication and characterization of hydrogel prepared using click reaction have been reported. At first, telechelic acetylene precursor for click reaction is prepared from diisocyanatohexane and propargyl alcohol in the presence of triethylamine. The azide derivatives of poly(hydroxyethylmethacrylate), i.e. poly(HEMA), are successfully prepared following two different routes. In route 1, esterification of bromopropionic acid is performed with HEMA monomer using N,N′-dicyclohexylcarbodiimide/4-dimethylaminopyridine (DCC/DMAP) as a catalyst followed by replacing bromide by azide moiety. Free radical polymerization of the fabricated monomer is then performed under N2 atmosphere using azobisisobutyronitrile (AIBN) as an initiator. In route 2, polymerization of HEMA has been carried out first, then modification of the polymer with azide group via successive steps to obtain azide derivative polymer for click reaction. The hydrogel is prepared by a very fast, highly specific, and simple click reaction between azide derivative polymer and telechelic acetylene precursor using copper as a catalyst. The structures of derivatives of azide-functionalized HEMA, acetylene precursors and hydrogels are confirmed by FTIR and 1H-NMR spectroscopy. The optimized structure of each precursor is determined, and their chemical and thermodynamic parameters are computationally studied in detail.

Vitamin B12- Peptide Nucleic Acid Conjugates.

Vitamin B12 (cobalamin, Cbl) is an essential nutrient for all mammals and some bacteria. From a chemical point of view, it is a highly functionalized molecule, which enables conjugation at multiple positions and attachment of various cargoes. Both mammalian and bacterial cells have developed a specific transport pathway for the uptake of vitamin B12, and as a consequence, cobalamin is an attractive candidate for the delivery of biologically relevant molecules into cells. Indeed, hybrid molecules containing vitamin B12 in their structure have found various applications in medicinal chemistry, diagnostics, and biological sciences.Herein, we describe synthetic strategies toward the synthesis of vitamin B12 conjugates with peptide nucleic acid (PNA ) oligomers. Such short-modified oligonucleotides targeted at bacterial DNA or RNA can act as antibacterial agents if efficiently taken up by bacterial cells. The uptake of such oligonucleotides is hindered by the bacterial cell envelope, but vitamin B12 was found to efficiently deliver antisense PNA into Escherichia coli and Salmonella Typhimurium cells. This paves the way to the use of vitamin B12-PNA conjugates in antibacterial and diagnostic applications.Vitamin B12-PNA conjugates can be prepared via copper(I)-catalyzed azide-alkyne cycloaddition (CuAAC) that gives access to covalently linked hybrids or via connecting both building blocks by reduction-sensitive disulfide bridge. Both approaches require prior modification of vitamin B12 by incorporation of the azide moiety or via transformation of the native functional group into a moiety reactive toward thiols. Conjugation of vitamin B12 with PNA-tagged substrates efficiently furnishes designed conjugates.

SYNTHESIS OF 2,3-FUNCTIONALIZED QUINOLINES

Quinoline and its derivatives represent the important class of nitrogen-containing heterocycles, which are useful intermediates in organic synthesis and exhibit a wide range of biological activity. In addition, the quinoline nucleus is a part of natural alkaloids and drugs that is why the synthesis of new quinoline derivatives is an actual task.The 2-chloroquinoline-3-carbaldehyde pays particular attention among a number of quinolines, which contains a chlorine atom and an aldehyde group, which make it an universal intermediate syntone in the synthesis of various bioactive quinoline derivatives.The purpose of this work is to synthesize Schiff bases based on 2-chloroquinoline-3-carbaldehyde.It was found that the interaction of 3-formyl-2-chloroquinoline with 1-aminopropanol-2 in an alcohol medium occures with the formation of 1-((2-chloroquinolin-3-yl) methylene) amino)propan-2-ol. To determine the impact of the nature of the alkyl substituent near the amino group, the condensation reactions of 2-chloroquinoline-3-carbaldehyde with amines containing cycloheptyl and cyclohexenyl fragment were performed. As results, Schiff bases with good yields (63%, 67%) have been received. The changing the alkyl substituent on the aromatic fragment in the amine molecule can increase the yields of the target azomethines to 75-97%. The use of amines with a heterocyclic moiety in the condensation reaction does not significantly impact on the yield of imines (71-77%).For further functionalization, the interaction of 1-(2-chloroquinolin-3-yl)-N-(4-fluorobenzyl)methanimine with 1,2,3,4-tetrahydroquinoline in ethyl alcohol has been performed. It results in 1-(3,4- dihydro-2H-[1,2'-biquinolin]-3'-yl)-N-(4-fluorobenzyl)methanimine, which contains two quinoline rings in its composition. The 3-(((2-chloroquinolin-3-yl)methylene)amino)tetrahydrothiophene 1,1-dioxide was converted to 3-((tetrazolo[1,5-a]quinolin-4-ylmethylene)amino)tetrahydrothiophene 1,1 -dioxide via reacting of the corresponding imine with sodium azide in dimethyl sulfoxide.Thus, bioperspective functionalized quinolines with imine, amine and azide moieties have been synthesized.

Optimizing chemical and mechanical stability of catalytic nanofiber web for development of efficient detoxification cloths against CWAs

N–Cl functional groups have been widely utilized for antimicrobial and detoxification purpose. However, along with the high reactivity of N–Cl moiety, long term stability of N–Cl moiety under ambient condition is of special interest for final applications. Diverse organic moieties have been developed to enhance N–Cl stability, and hydantoin N–Cl groups are generally accepted as a promising candidate. Here, N–Cl functionalized electrospun nanofibers are prepared via surface functionalization method for fabrication of catalytic nanofiber mat against chemical warfare agent. Thermoplastic polyurethane (TPU) containing abundant pandent azide moiety is firstly synthesized, and nanofiber web is prepared via electrospinning. Hydantoin functional groups that are well-known moiety to stabilize N–Cl functional groups are introduced via surface click reaction. The storage stability of N–Cl groups from surface reaction is superior than that of bulk reaction with maintaining their catalytic activity for decomposition of chemical warfare agents. In order to increase mechanical properties of nanofiber web, amount of hydantoin groups on surfaces has been controlled by blending of normal TPU with azide TPU, and blended nanofiber web maintains their inherent flexibility after hydantoin functionalization and N-chlorination. Optimized blending conditions to achieve both of high N–Cl stability and enhanced catalytic activity have been traced. Surface rich N–Cl groups show better stability with maintaining their inherent catalytic activities.

Synthesis of Azido Acids and Their Application in the Preparation of Complex Peptides

AbstractAzido acids are important synthons for the synthesis of complex peptides. As a protecting group, the azide moiety is atom-efficient, easy to install and can be reduced in the presence of many other protecting groups, making it ideal for the synthesis of branched and/or cyclic peptides. α-Azido acids are less bulky than urethane-protected counterparts and react more effectively in coupling reactions of difficult-to-form peptide and ester bonds. Azido acids can also be used to form azoles on complex intermediates. This review covers the synthesis of azido acids and their application to the total synthesis of complex peptide natural products.1 Introduction2 Synthesis of α-Azido Acids2.1 From α-Amino Acids or Esters2.2 Via α-Substitution2.3 Via Electrophilic Azidation2.4 Via Condensation of N-2-Azidoacetyl-4-Phenylthiazolidin- 2-Thi one Enolates with Aldehydes and Acetals2.5 Synthesis of α,β-Unsaturated α-Azido Acids and Esters3 Synthesis of β-Azido Acids3.1 Preparation of Azidoalanine and 3-Azido-2-aminobutanoic Acids3.2 General Approaches to Preparing β-Azido Acids Other Than Azi doalanine­ and AABA4 Azido Acids in Total Synthesis4.1 α-Azido Acids4.2 β-Azido Acids and Azido Acids Containing an Azide on the Side Chain5 Conclusions

Solid‐Phase Synthesis of RNA 5′‐Azides and Their Application for Labeling, Ligation, and Cyclization Via Click Chemistry

RNAs with 5' functional groups have been gaining interest as molecular probes and reporter molecules. Copper-catalyzed azide-alkyne cycloaddition is one of the most straightforward methods to access such molecules; however, RNA functionalization with azide group has been posing a synthetic challenge. This article describes a simple and efficient protocol for azide functionalization of oligoribonucleotides 5'-end in solid-phase. An azide moiety is attached directly to the C5'-end in two steps: (i) -OH to -I conversion using methyltriphenoxyphosphonium iodide, and (ii) -I to -N3 substitution using sodium azide. The reactivity of the resulting compounds is exemplified by fluorescent labeling using both copper(I)-catalyzed (CuAAC) and strain-promoted (SPAAC) azide-alkyne cycloaddition reactions, ligation of two RNA fragments, and cyclization of short bifunctionalized oligonucleotides. The protocol makes use of oligoribonucleotides synthesized by standard phosphoramidite approach on solid support, using commercially available 2'-O-PivOM-protected monomers. Such a protection strategy eliminates the interference between the iodination reagent and silyl protecting groups (TBDMS, TOM) commonly used in RNA synthesis by phosphoramidite approach. © 2020 Wiley Periodicals LLC. Basic Protocol 1: Solid-phase synthesis of oligoribonucleotide 5'-azides Basic Protocol 2: CuAAC labeling of oligoribonucleotide 5'-azides in solution Alternate Protocol 1: CuAAC labeling of oligoribonucleotide 5'-azides on solid support Basic Protocol 3: SPAAC labeling of oligoribonucleotide 5'-azides Basic Protocol 4: CuAAC ligation of oligoribonucleotide 5'-azides Basic Protocol 5: CuAAC cyclization of oligoribonucleotide 5'-azides Support Protocol: HPLC Purification.

Biofunctional Polymer Coated Au Nanoparticles Prepared via RAFT-Assisted Encapsulating Emulsion Polymerization and Click Chemistry.

The use of reversible addition-fragmentation chain transfer (RAFT)-assisted encapsulating emulsion polymerization (REEP) has been explored to prepare diverse types of colloidal stable core–shell nanostructures. A major field of application of such nanoparticles is in emergent nanomedicines, which require effective biofunctionalization strategies, in which their response to bioanalytes needs to be firstly assessed. Herein, functional core–shell nanostructures were prepared via REEP and click chemistry. Thus, following the REEP strategy, colloidal gold nanoparticles (Au NPs, d = 15 nm) were coated with a poly(ethylene glycol) methyl ether acrylate (PEGA) macroRAFT agent containing an azide (N3) group to afford N3–macroRAFT@Au NPs. Then, chain extension was carried out from the NPs surface via REEP, at 44 °C under monomer-starved conditions, to yield N3–copolymer@Au NPs–core–shell type structures. Biotin was anchored to N3–copolymer@Au NPs via click chemistry using an alkynated biotin to yield biofunctionalized Au nanostructures. The response of the ensuing biotin–copolymer@Au NPs to avidin was followed by visible spectroscopy, and the copolymer–biotin–avidin interaction was further studied using the Langmuir–Blodgett technique. This research demonstrates that REEP is a promising strategy to prepare robust functional core–shell plasmonic nanostructures for bioapplications. Although the presence of azide moieties requires the use of low polymerization temperature, the overall strategy allows the preparation of tailor-made plasmonic nanostructures for applications of biosensors based on responsive polymer shells, such as pH, temperature, and photoluminescence quenching. Moreover, the interaction of biotin with avidin proved to be time dependent.

Diborane(4) Azides: Surprisingly Stable Sources of Transient Iminoboranes.

Herein we describe the first examples of isolable electron‐precise diboranes(4) that bear azide moieties: the acyclic 1,2‐diazido‐1,2‐bis(dimethylamino)diborane(4) and the cyclic 1,4‐diaryl‐2,3‐diazido‐1,4‐diaza‐2,3‐diborinines (aryl=mesityl, 2,6‐xylyl, 4‐tolyl). The reported examples are not only stable enough to be observed and isolated (putative transient diborane(4) azides previously reported by our group spontaneously decompose even below room temperature), but some of them are even robust enough to undergo controlled pyrolysis without explosive decomposition at temperatures well above 100 °C. In two cases, the controlled pyrolysis allows the isolation of complex diazaboretidines, which are the apparent dimerization products of endocyclic boryl‐iminoboranes.

C–H Amination Mediated by Cobalt Organoazide Adducts and the Corresponding Cobalt Nitrenoid Intermediates

Treatment of (ArL)CoBr (ArL = 5-mesityl-1,9-(2,4,6-Ph3C6H2)dipyrrin) with a stoichiometric amount of 1-azido-4-(tert-butyl)benzene N3(C6H4-p-tBu) furnished the corresponding four-coordinate organoazide-bound complex (ArL)CoBr(N3(C6H4-p-tBu)). Spectroscopic and structural characterization of the complex indicated redox innocent ligation of the organoazide. Slow expulsion of dinitrogen (N2) was observed at room temperature to afford a ligand functionalized product via a [3 + 2] annulation, which can be mediated by a high-valent nitrene intermediate such as a CoIII iminyl (ArL)CoBr(•N(C6H4-p-tBu)) or CoIV imido (ArL)CoBr(N(C6H4-p-tBu)) complex. The presence of the proposed intermediate and its viability as a nitrene group transfer reagent are supported by intermolecular C-H amination and aziridination reactivities. Unlike (ArL)CoBr(N3(C6H4-p-tBu)), a series of alkyl azide-bound CoII analogues expel N2 only above 60 °C, affording paramagnetic intermediates that convert to the corresponding Co-imine complexes via α-H-atom abstraction. The corresponding N2-released structures were observed via single-crystal-to-crystal transformation, suggesting formation of a Co-nitrenoid intermediate in solid-state. Alternatively, the alkyl azide-bound congeners supported by a more sterically accessible dipyrrinato scaffold tBuL (tBuL = 5-mesityl-(1,9-di-tert-butyl)dipyrrin) facilitate intramolecular 1,3-dipolar cycloaddition as well as C-H amination to furnish 1,2,3-dihydrotriazole and substituted pyrrolidine products, respectively. For the C-H amination, we observe that the temperature required for azide activation varies depending on the presence of weak C-H bonds, suggesting that the alkyl azide adducts serve as viable species for C-H amination when the C-H bonds are (1) proximal to the azide moiety and (2) sufficiently weak to be activated.

Eosin Y‐Catalyzed Visible‐Light‐Mediated Synthesis of 2‐Mercaptobenzothiazoles from 2‐Azidoarenediazonium Tetrafluoroborates and Carbon Disulfide

AbstractA visible‐light photocatalyzed process for the synthesis of 2‐mercaptobenzothiazoles from 2‐azidoarenediazonium tetrafluoroborates and carbon disulfide has been discovered. The reaction proceeded via single electron transfer reduction of azidoarenediazonium ion to corresponding azidoarene radical followed by carbon disulfide addition and intramolecular cyclization (with azide moiety) reactions. This method is very practical owing to the use of inexpensive eosin Y, mild reaction conditions and easy purification step thus delivering the target compounds in high yields.

Mesenchymal Stem Cells As Guideposts for Nanoparticle-Mediated Targeted Drug Delivery in Ovarian Cancer.

Nanocarriers have been extensively utilized for the systemic targeting of various solid tumors and their metastases. However, current drug delivery systems, in general, suffer from a lack of selectivity for tumor cells. Here, we develop a novel two-step targeting strategy that relies on the selective accumulation of targetable synthetic receptors (i.e., azide moieties) in tumor tissues, followed by delivery of drug-loaded nanoparticles having a high binding affinity for these receptors. Mesenchymal stem cells (MSCs) were used as vehicles for the tumor-specific accumulation of azide moieties, while dibenzyl cyclooctyne (DBCO) was used as the targeting ligand. Biodistribution and antitumor efficacy studies were performed in both orthotopic metastatic and patient-derived xenograft (PDX) tumor models of ovarian cancer. Our studies show that nanoparticles are retained in tumors at a significantly higher concentration in mice that received azide-labeled MSCs (MSC-Az). Furthermore, we observed significantly reduced tumor growth (p < 0.05) and improved survival in mice receiving MSC-Az along with paclitaxel-loaded DBCO-functionalized nanoparticles compared to controls. These studies demonstrate the feasibility of a two-step targeting strategy for efficient delivery of concentrated chemotherapy for treating solid tumors.

Universal three-dimensional crosslinker for all-photopatterned electronics

All-solution processing of large-area organic electronics requires multiple steps of patterning and stacking of various device components. Here, we report the fabrication of highly integrated arrays of polymer thin-film transistors and logic gates entirely through a series of solution processes. The fabrication is done using a three-dimensional crosslinker in tetrahedral geometry containing four photocrosslinkable azide moieties, referred to as 4Bx. 4Bx can be mixed with a variety of solution-processable electronic materials (polymer semiconductors, polymer insulators, and metal nanoparticles) and generate crosslinked network under exposure to UV. Fully crosslinked network film can be formed even at an unprecedentedly small loading, which enables preserving the inherent electrical and structural characteristics of host material. Because the crosslinked electronic component layers are strongly resistant to chemical solvents, micropatterning the layers at high resolution as well as stacking the layers on top of each other by series of solution processing steps is possible.

Chemo-selective Rh-catalysed hydrogenation of azides into amines

Rh/Al2O3 can be used as an effective chemo-selective reductive catalyst that combines the mild conditions of catalytic hydrogenation with high selectivity for azide moieties in the presence of other hydrogenolysis labile groups such as benzyl and benzyloxycarbonyl functionalities. The practicality of this strategy is exemplified with a range of azide-containing carbohydrate and amino acid derivatives.

Oxidative Fluorocyclization of Vinyl Azides Leading to 5‐Azido,5‐fluoro‐1,3‐oxolan‐2‐one

Vinyl azides have become versatile building blocks in organic synthesis. Most of their transformations usually undergo a fast release of molecular N2 to generate 2H‐aziridine and vinyl nitrene intermediates. However, retaining the azides group in the final product is quite rare and challenging. Herein, we design and validate a new alkene difunctionalization strategy that involves an oxidative fluorocyclization of vinyl azides for the synthesis of a variety of 5‐azido,5‐fluoro‐1,3‐oxolan‐2‐ones with broad substrate scope and good functional group tolerance in good to excellent yields. The in situ removal of a leaving group in this difunctionalization reaction is a key to retain azide moiety in the final product.

Copper-Free Click Chemistry-Mediated Cyclic Ligation Amplification for Highly Sensitive and Non-Label Electrochemical Detection of Gene Mutation

Herein, a new signal amplification strategy on the basis of copper-free click chemistry-mediated cyclic ligation of DNA for detecting cancer-related mutant p53 (mp53) gene with high sensitivity is described. The complementary sandwich hybridization of the target mp53 gene with the azide-modified capture probes and the dibenzocyclooctyne-conjugated and G-quadruplex containing signal probes pulls the azide and dibenzocyclooctyne moieties into close proximity, leading to copper-free click ligation of the signal probes on the sensor surface. Subsequent thermal recycling of the target gene results in the attachment of lots of signal probes on the electrode. The many G-quadruplex segments in the signal probes then bind and confine hemin within the vicinity of the electrode surface, thereby yielding substantially amplified reduction current response for detecting the mutant target mp53 sequences with a low detection limit of 7.7 fM. This sensor can also discriminate mutant and wild gene with single base mutation and can realize target gene detection in diluted human serums. Distinct from conventional copper-mediated click chemistry and ligase-based DNA ligation, our approach is copper- and enzyme-free, making our method a simple and robust signal amplification sensing means for detecting low levels of different DNA biomarkers.