Avidin Conjugates Research Articles

PD-L1 ImmunoPET on the basis of Avidin/Biotin pre-targeted cancer imaging

This study aimed to establish the radio-immune imaging protocol on the basis of Avidin/Biotin system. The programmed death-ligand 1 (PD-L1) antibody (Atezolizumab) was employed as the primary molecule in targeting PD-L1, and the two-step strategy, consisting of the first injection of Avidin-conjugated PD-L1 monoclonal antibody (Atezolizumab) and the second injection of 7.4 MBq 68Ga-Biotin with a 60 h interval, was then verified on the colon cancer-bearing mice. PET imaging was performed at 30, 90, 180 min to measure the standard uptake value and tumor to liver ratios. Cellular binding experiments and in vivo distribution showed that the conjugation of Avidin did not affect the affinity of Atezolizumab to PD-L1 antigen. Biotin was radio-labeled with 68Ga with radiolabeling efficiency of 70.5 ± 3.5% and purification was needed to increase the radiochemical purity. For PD-L1-positive tumors, SUVmax was 0.38 ± 0.06 in the Avidin-Atezolizumab pre-treated mice at 90 min; the tumor/liver ratios of pre-targeting group were 1.06 ± 0.19 and 0.97 ± 0.16 at 30 and 90 min, while the absence of pre-treatment of Avidin was of the lower ratios as 0.88 ± 0.01 and 0.54 ± 0.11 when 68Ga-Biotin served as the radiopharmaceutical as well. In conclusion, pre-targeting immunoPET strategy can elevate the target-to-nontarget ratio, decrease the blood background and shorten the interval between injection of radiopharmaceuticals and PET scan, providing a highly PD-L1-specific and sensitive imaging method for the detection of tumorous immune micro-environment.

Gold-Nanoparticle-Coated Magnetic Beads for ALP-Enzyme-Based Electrochemical Immunosensing in Human Plasma.

A simple and sensitive AuNP-coated magnetic beads (AMB)-based electrochemical biosensor platform was fabricated for bioassay. In this study, AuNP-conjugated magnetic particles were successfully prepared using biotin–streptavidin conjugation. The morphology and structure of the nanocomplex were characterized by scanning electron microscopy (SEM) with energy-dispersive X-ray analysis (EDX) and UV–visible spectroscopy. Moreover, cyclic voltammetry (CV) was used to investigate the effect of AuNP-MB on alkaline phosphatase (ALP) for electrochemical signal enhancement. An ALP-based electrochemical (EC) immunoassay was performed on the developed AuNP-MB complex with indium tin oxide (ITO) electrodes. Subsequently, the concentration of capture antibodies was well-optimized on the AMB complex via biotin–avidin conjugation. Lastly, the developed AuNP-MB immunoassay platform was verified with extracellular vesicle (EV) detection via immune response by showing the existence of EGFR proteins on glioblastoma multiforme (GBM)-derived EVs (108 particle/mL) spiked in human plasma. Therefore, the signal-enhanced ALP-based EC biosensor on AuNP-MB was favorably utilized as an immunoassay platform, revealing the potential application of biosensors in immunoassays in biological environments.

A Comparative Study on the Feasibility of Graphene Based Avidin Conjugate for Potential Curcumin Detection

In the area of interdisciplinary research, modern and creative methods of interpreting substances are still of considerable importance. Curcuma longa’ active component commonly known as diferuloylmethane is the most sorts after food preservative, medicinal spice, additive and coloring agent, which harbors a wide range of the biological spectrum. The major problem observed with this wonder drug is the low bioavailability of the drug in the gut, hence leading to further lower concentrations of the therapeutic reaching the tissues and plasma. Constituting only a minor part of its parent rhizome, curcumin is not the only compound to be offered by turmeric, but for certain ailments, the amount of curcumin required is more than others, and this higher concentration of curcumin cannot be met with a daily consumption of curcumin from the normal food diet. This very fact has led to the introduction of commercialization of supplements of curcumin as tablets and capsules. This artificial rise in curcumin levels by supplementation could have an opposite impact on the human body, as some reports have indicated. Therefore, a potential alternative, quick, economical way of sensing curcumin was proposed in the present research. The effect of protein decorated electrode in the same was studied. Before experimental implantation, the experimental feasibility of the same through docking was checked. In silico study on the possible interaction of the protein with curcumin, a protein with GO and rGO respectively using discovery studio 4 software was conducted. Experimental feasibility deals with the sensing of curcumin using electrochemical work station using avidin conjugated GO (Av-GO) and rGO (Av- rGO). The Av-GO modified electrode showed a lowest detection of 3.9nM while the Av-rGO modified electrode showed a lower detection limit of 4.9nM. These values have been the lowest using avidin that has been reported for curcumin. The concentration detected correlates to the quantity that is present in the gut physiology, hence substantiating the potential use in real time sensing of curcumin.

Directly Functionalized Cucurbit[7]uril as a Biosensor for the Selective Detection of Protein Interactions by 129 Xe hyperCEST NMR.

Advancement of hyperpolarized 129 Xe MRI technology toward clinical settings demonstrates the considerable interest in this modality for diagnostic imaging. The number of contrast agents, termed biosensors, for 129 Xe MRI that respond to specific biological targets, has grown and diversified. Directly functionalized xenon-carrying macrocycles, such as the large family of cryptophane-based biosensors, are good for localization-based imaging and provide contrast before and after binding events occur. Noncovalently functionalized constructs, such as cucurbituril- and cyclodextrin-based biosensors, benefit from commercial availability and optimal exchange dynamics for CEST imaging. In this work, we report the first directly functionalized cucurbituril used as a xenon biosensor. Biotinylated cucurbit[7]uril (btCB7) gives rise to a 129 Xe hyperCEST response at the unusual shift of δ=28 ppm when bound to its protein target with substantial CEST contrast. We posit that the observed chemical shift is due to the deformation of btCB7 upon binding to avidin, caused by proximity to the protein surface. Conformational searches and molecular dynamics (MD) simulations support this hypothesis. This construct combines the strengths of both families of biosensors, enables a multitude of biological targets through avidin conjugation, and demonstrates the advantages of functionalized cucurbituril-based biosensors.

Chlorophyll-Inspired Red-Region Fluorophores: Building Block Synthesis and Studies in Aqueous Media.

Fluorophores that absorb and emit in the red spectral region (600–700 nm) are of great interest in photochemistry and photomedicine. Eight new target chlorins (and 19 new chlorins altogether)—analogues of chlorophyll—of different polarities have been designed and synthesized for various applications; seven of the chlorins are equipped with a bioconjugatable tether. Hydrophobic or amphiphilic chlorins in a non-polar organic solvent (toluene), polar organic solvent (DMF), and aqueous or aqueous micellar media show a sharp emission band in the red region and modest fluorescence quantum yield (Φf = 0.2–0.3). A Poisson analysis implies most micelles are empty and few contain >1 chlorin. Water-soluble chlorins each bearing three PEG (oligoethyleneglycol) groups exhibit narrow emission bands (full-width-at-half maximum <25 nm). The lifetime of the lowest singlet excited state and the corresponding yields and rate constants for depopulation pathways (fluorescence, intersystem crossing, internal conversion) are generally little affected by the PEG groups or dissolution in aqueous or organic media. A set of chlorin–avidin conjugates revealed a 2-fold increase in Φf with increased average chlorin/avidin ratio (2.3–12). In summary, the chlorins of various polarities described herein are well suited as red-emitting fluorophores for applications in aqueous or organic media.

Ball with hair: modular functionalization of highly stable G-quadruplex DNA nano-scaffolds through N2-guanine modification.

Functionalized nanoparticles have seen valuable applications, particularly in the delivery of therapeutic and diagnostic agents in biological systems. However, the manufacturing of such nano-scale systems with the consistency required for biological application can be challenging, as variation in size and shape have large influences in nanoparticle behavior in vivo. We report on the development of a versatile nano-scaffold based on the modular functionalization of a DNA G-quadruplex. DNA sequences are functionalized in a modular fashion using well-established phosphoramidite chemical synthesis with nucleotides containing modification of the amino (N2) position of the guanine base. In physiological conditions, these sequences fold into well-defined G-quadruplex structures. The resulting DNA nano-scaffolds are thermally stable, consistent in size, and functionalized in a manner that allows for control over the density and relative orientation of functional chemistries on the nano-scaffold surface. Various chemistries including small modifications (N2-methyl-guanine), bulky aromatic modifications (N2-benzyl-guanine), and long chain-like modifications (N2-6-amino-hexyl-guanine) are tested and are found to be generally compatible with G-quadruplex formation. Furthermore, these modifications stabilize the G-quadruplex scaffold by 2.0–13.3 °C per modification in the melting temperature, with concurrent modifications producing extremely stable nano-scaffolds. We demonstrate the potential of this approach by functionalizing nano-scaffolds for use within the biotin–avidin conjugation approach.

Negative dielectrophoresis spectroscopy for rare analyte quantification in biological samples.

We propose the use of negative dielectrophoresis (DEP) spectroscopy as a technique to improve the detection limit of rare analytes in biological samples. We observe a significant dependence of the negative DEP force on functionalized polystyrene beads at the edges of interdigitated electrodes with respect to the frequency of the electric field. We measured this velocity of repulsion for 0% and 0.8% conjugation of avidin with biotin functionalized polystyrene beads with our automated software through real-time image processing that monitors the Rayleigh scattering from the beads. A significant difference in the velocity of the beads was observed in the presence of as little as 80 molecules of avidin per biotin functionalized bead. This technology can be applied in the detection and quantification of rare analytes that can be useful in the diagnosis and the treatment of diseases, such as cancer and myocardial infarction, with the use of polystyrene beads functionalized with antibodies for the target biomarkers.

Fabrication of FGF-2 immobilized electrospun gelatin nanofibers for tissue engineering

Conjugated gelatin nanofibers were fabricated by electrospinning, followed by a simple glutaraldehyde cross-linking procedure and avidin conjugation. Then, biotinylated growth factors were immobilized onto the surface of the fibers through avidin-biotin covalent binding. The immobilization of growth factors was confirmed through immunostaining using fluorescence microscopy and microplate spectrophotometry. Adipose derived stem cells (ASCs) were cultured to examine the effect of immobilized growth factors on cell proliferation using the cell counting Kit-8 (CCK-8) assay. Gelatin nanofibers with no growth factors attached and growth factors in suspension within media were used as controls. Growth factors were successfully immobilized onto the surface, in amounts corresponding to the concentrations applied, and increased cell proliferation to a higher extend than growth factors in suspension. Our results suggest that this controllable scaffolding strategy provides an effective system for growth factors delivery in tissues, suitable for engineering applications.

A Targeting Microbubble for Ultrasound Molecular Imaging.

RationaleMicrobubbles conjugated with targeting ligands are used as contrast agents for ultrasound molecular imaging. However, they often contain immunogenic (strept)avidin, which impedes application in humans. Although targeting bubbles not employing the biotin-(strept)avidin conjugation chemistry have been explored, only a few reached the stage of ultrasound imaging in vivo, none were reported/evaluated to show all three of the following properties desired for clinical applications: (i) low degree of non-specific bubble retention in more than one non-reticuloendothelial tissue; (ii) effective for real-time imaging; and (iii) effective for acoustic quantification of molecular targets to a high degree of quantification. Furthermore, disclosures of the compositions and methodologies enabling reproduction of the bubbles are often withheld.ObjectiveTo develop and evaluate a targeting microbubble based on maleimide-thiol conjugation chemistry for ultrasound molecular imaging.Methods and ResultsMicrobubbles with a previously unreported generic (non-targeting components) composition were grafted with anti-E-selectin F(ab’)2 using maleimide-thiol conjugation, to produce E-selectin targeting microbubbles. The resulting targeting bubbles showed high specificity to E-selectin in vitro and in vivo. Non-specific bubble retention was minimal in at least three non-reticuloendothelial tissues with inflammation (mouse heart, kidneys, cremaster). The bubbles were effective for real-time ultrasound imaging of E-selectin expression in the inflamed mouse heart and kidneys, using a clinical ultrasound scanner. The acoustic signal intensity of the targeted bubbles retained in the heart correlated strongly with the level of E-selectin expression (|r|≥0.8), demonstrating a high degree of non-invasive molecular quantification.ConclusionsTargeting microbubbles for ultrasound molecular imaging, based on maleimide-thiol conjugation chemistry and the generic composition described, may possess properties (i)–(iii) desired for clinical applications.

Bi-functionalized aptasensor for ultrasensitive detection of thrombin

A novel bi-functionalized aptasensor for thrombin detection was fabricated by using electrochemiluminescence (ECL) and electrochemical impedance spectroscopy (EIS) techniques. A thiol-terminated aptamer with 15 oligonucleotides was hybridized with its complementary oligonucleotides to form a double-stranded DNA (dsDNA). Then, the thiol-labeled dsDNA was assembled on a Au electrode via Au–S bond; the other distal of the dsDNA labeled with biotin was bound to QDs through a biotin–avidin conjugation. When thrombin is present in the detection solution, the aptamer can combine with thrombin, resulting in loss of CdSe QDs from the electrode surface and thereby decreasing the ECL intensity and increasing the impedance. The decreased ECL and increased EIS signals are logarithmically linear with respect to the concentration of thrombin. The linear range was 10−10–10−3μgmL−1 (R=0.9924) for the ECL signal and 10−10–10−1μgmL−1 (R=0.9875) for the EIS method with a common detection limit of 10−10μgmL−1 (2.7aM). In addition, the bi-functionalized aptasensor exhibited excellent selectivity, super sensitivity, a low detection limit and a wide linear range.

Electrochemical genosensor assay using lyophilized gold nanoparticles/latex microsphere label for detection of Vibrio cholerae

Vibrio cholerae is a Gram-negative bacterium that causes cholera, a diarrheal disease. Cholera is widespread in poor, under-developed or disaster-hit countries that have poor water sanitation. Hence, a rapid detection method for V. cholerae in the field under these resource-limited settings is required. In this paper, we describe the development of an electrochemical genosensor assay using lyophilized gold nanoparticles/latex microsphere (AuNPs–PSA) reporter label. The reporter label mixture was prepared by lyophilization of AuNPs–PSA–avidin conjugate with different types of stabilizers. The best stabilizer was 5% sorbitol, which was able to preserve the dried conjugate for up to 30 days. Three methods of DNA hybridization were compared and the one-step sandwich hybridization method was chosen as it was fastest and highly specific. The performance of the assay using the lyophilized reagents was comparable to the wet form for detection of 1aM to 1fM of linear target DNA. The assay was highly specific for V. cholerae, with a detection limit of 1fM of PCR products. The ability of the sensor is to detect LAMP products as low as 50ngµl−1. The novel lyophilized AuNPs–PSA–avidin reporter label with electrochemical genosensor detection could facilitate the rapid on-site detection of V. cholerae.

A luminescent cyclometalated gold(iii)-avidin conjugate with a long-lived emissive excited state that binds to proteins and DNA and possesses anti-proliferation capacity.

Here we describe a luminescent cyclometalated Au(iii)-avidin conjugate that exhibits a 520 nm emission with a lifetime of 1.8 μs in PBS solution in open air. The conjugate stains proteins and DNA and can inhibit cancer cell proliferation.

Preparation of RuBpy-doped Silica Fluorescent Nanoprobes and Their Applications to the Recognition of Liver Cancer Cells

Abstract Two different functional groups modified RuBpy-doped silica fluorescent nanoprobes Probe A and B that conjugated with avidin were prepared for the recognition of liver cancer cells. Firstly RuBpy-doped silica nanoparticles were synthesized by reverse microemulsion and then modified with different functional groups. Probe A was prepared by the conjugation of avidin with carboxyl modified nanoparticles through covalent binding using EDC/sulfo-NHS, whereas Probe B was prepared by the conjugation of avidin with the PEG linkers on the surface nanoparticles using cyanogen bromide method. Therefore, different from Probe A, Probe B was obtained by coupling avidin to the nanoparticles through long-chain PEG molecules. The two probes were incubated with liver cancer cells respectively, and microscopic fluorescence imaging showed that Probe B which contained PEG molecules was more effectively applied for the recognition of tumor marker carcinoembryonic antigen (CEA) in liver cancer cells.

Site-Specific Derivatization of Avidin Using Microbial Transglutaminase

Avidin conjugates have several important applications in biotechnology and medicine. In this work, we investigated the possibility to produce site-specific derivatives of avidin using microbial transglutaminase (TGase). TGase allows the modification of proteins at the level of Gln or Lys residues using as substrate an alkyl-amine or a Gln-mimicking moiety, respectively. The reaction is site-specific, since Gln and Lys derivatization occurs preferentially at residues embedded in flexible regions of protein substrates. An analysis of the X-ray structure of avidin allowed us to predict Gln126 and Lys127 as potential sites of TGase's attack, because these residues are located in the flexible/unfolded C-terminal region of the protein. Surprisingly, incubation of avidin with TGase in the presence of alkylamine containing substrates (dansylcadaverine, 5-hydroxytryptamine) revealed a very low level of derivatization of the Gln126 residue. Analysis of the TGase reaction on synthetic peptide analogues of the C-terminal portion of avidin indicated that the lack of reactivity of Gln126 was likely due to the fact that this residue is proximal to negatively charged carboxylate groups, thus hampering the interaction of the substrate at the negatively charged active site of TGase. On the other hand, incubation of avidin with TGase in the presence of carbobenzoxy-l-glutaminyl-glycine in order to derivatize Lys residue(s) resulted in a clean and high yield production of an avidin derivative, retaining the biotin binding properties and the quaternary structure of the native protein. Proteolytic digestion of the modified protein, followed by mass spectrometry, allowed us to identify Lys127 as the major site of reaction, together with a minor modification of Lys58. By using TGase, avidin was also conjugated via a Lys-Gln isopeptide bond to a protein containing a single reactive Gln residue, namely, Gln126 of granulocyte-macrophage colony-stimulating factor. TGase can thus be exploited for the site-specific derivatization of avidin with small molecules or proteins.

A step closer to membrane protein multiplexed nanoarrays using biotin-doped polypyrrole.

Whether for fundamental biological research or for diagnostic and drug discovery applications, protein micro- and nanoarrays are attractive technologies because of their low sample consumption, high-throughput, and multiplexing capabilities. However, the arraying platforms developed so far are still not able to handle membrane proteins, and specific methods to selectively immobilize these hydrophobic and fragile molecules are needed to understand their function and structural complexity. Here we integrate two technologies, electropolymerization and amphipols, to demonstrate the electrically addressable functionalization of micro- and nanosurfaces with membrane proteins. Gold surfaces are selectively modified by electrogeneration of a polymeric film in the presence of biotin, where avidin conjugates can then be selectively immobilized. The method is successfully applied to the preparation of protein-multiplexed arrays by sequential electropolymerization and biomolecular functionalization steps. The surface density of the proteins bound to the electrodes can be easily tuned by adjusting the amount of biotin deposited during electropolymerization. Amphipols are specially designed amphipathic polymers that provide a straightforward method to stabilize and add functionalities to membrane proteins. Exploiting the strong affinity of biotin for streptavidin, we anchor distinct membrane proteins onto different electrodes via a biotin-tagged amphipol. Antibody-recognition events demonstrate that the proteins are stably immobilized and that the electrodeposition of polypyrrole films bearing biotin units is compatible with the protein-binding activity. Since polypyrrole films show good conductivity properties, the platform described here is particularly well suited to prepare electronically transduced bionanosensors.

Biohybrid structures consisting of biotinylated glycodendrimers and proteins: influence of the biotin ligand's number and chemical nature on the biotin–avidin conjugation

We present the bioconjugation of avidin as a central and/or bridging building block with mono-, bi- and tetravalent biotinylated glycodendrimers to fabricate defined supramolecular nanostructures for future (bio)medical applications. For this purpose mono-, bi- and tetravalent biotinylated glycodendrimers, decorated with short alkyl-linked or long PEG-linked biotin ligands, were synthesized and characterized by NMR, IR and mass spectrometry and HABA displacement assay. Various techniques (UV/Vis, DLS, TEM, LILBID-MS and AF4) were used in order to obtain information about the structural properties of different conjugates of avidin and mono-, bi- and tetravalent biotinylated glycodendrimers. The biotin ligand's spacer length, its chemical structure and the degree of biotin functionalization are essential parameters in the formation of nanostructures with avidin having a controlled composition and size dimension up to 100 nm. Biohybrid structures with avidin as a central unit require monovalent glycodendrimers with PEG-linked biotin, while bi- and tetravalent glycodendrimers with short alkyl-linked biotin ligands are more efficient than their counterparts with longer PEG–biotin ligands in the fabrication of defined biohybrid structures (∅ up to 100 nm) with avidin as a bridging unit. The most dominating key issue, combined with other conjugation issues, is the optimal ligand–receptor stoichiometry to fabricate biohybrid structures with diameter of <20, <30 or up to 100 nm.

Microscopic Visualization of Metabotropic Glutamate Receptors on the Surface of Living Cells Using Bifunctional Magnetic Resonance Imaging Probes

A series of bimodal metabotropic glutamate-receptor targeted MRI contrast agents has been developed and evaluated, based on established competitive metabotropic Glu receptor subtype 5 (mGluR5) antagonists. In order to directly visualize mGluR5 binding of these agents on the surface of live astrocytes, variations in the core structure were made. A set of gadolinium conjugates containing either a cyanine dye or a fluorescein moiety was accordingly prepared, to allow visualization by optical microscopy in cellulo. In each case, surface receptor binding was compromised and cell internalization observed. Another approach, examining the location of a terbium analogue via sensitized emission, also exhibited nonspecific cell uptake in neuronal cell line models. Finally, biotin derivatives of two lead compounds were prepared, and the specificity of binding to the mGluR5 cell surface receptors was demonstrated with the aid of their fluorescently labeled avidin conjugates, using both total internal reflection fluorescence (TIRF) and confocal microscopy.

Generic Method for Attaching Biomolecules via Avidin–Biotin Complexes Immobilized on Films of Regenerated and Nanofibrillar Cellulose

We investigated the adsorption and chemical conjugation of avidin and its deglycosylated form, neutravidin, on films of regenerated and nanofibrillar cellulose. The dynamics and extent of biomolecular attachment were monitored in situ by quartz crystal microbalance microgravimetry and ex situ via surface analyses with atomic force microscopy and X-ray photoelectron spectroscopy. The installation of carboxyl groups on cellulose after modification with carboxymethylated cellulose (CMC) or TEMPO-oxidation significantly increases physisorption of avidins, which can be then covalently conjugated by using 1-ethyl-3-[3-dimethylaminopropyl]carbodiimide hydrochloride/N-hydroxysuccinimide (EDS/NHS) coupling chemistries. The developed cellulose-avidin biointerfaces are able to scavenge biotinylated molecules from solution as demonstrated by successful surface complexation of biotinylated bovine serum albumin (Biotin-BSA) and antihuman immunoglobulin G (Biotin-anti-hIgG). Finally, we show that cellulose substrates carrying immobilized anti-hIgG are effective in detecting human immunoglobulin G (hIgG) from fluid matrices.

Covalent conjugation of avidin with dye-doped silica nanopaticles and preparation of high density avidin nanoparticles as photostable bioprobes

Progress in biomedical imaging depends on the development of bioprobes with a high sensitivity and stability. Fluorescent silica nanoparticles (NPs) covalent conjugation of avidin has been proposed for cancer cells imaging by fluorescence microscopy. Uniform silica NPs were prepared using water-in-oil (W/O) microemulsion methods and primary amine groups were introduced onto the surface of the NPs by condensation of tetraethyl orthosilicate (TEOS). Optically stable organic dyes, tris(2,2'-bipyridyl) dichlororuthenium(II) hexahydrate (Rubpy), were doped inside the silica NPs. The amine functions were transferred to carboxyl groups coupled with a linker elongation. Avidin was immobilized at the surface of the NPs by covalent binding to the carboxyl linkers. The binding capacity of the avidin-covered NPs for ligand biotin was quantified by titration with biotin(5-fluorescein) conjugate to 1.25 biotin binding sites/100nm2. We used biotinylated antibody and cell recognition by fluorescence microscopy imaging technique. The lung carcinoma cells were identified easily with high efficiency using these antibody-coated NPs. By comparison with fluorescein isothiocyanate (FITC), dye-doped silica NPs display dramatically increased stability of fluorescence as well as photostability, as compared to the common organic dye, when under continuous irradiation.

Enhancement of surface ligand display on PLGA nanoparticles with amphiphilic ligand conjugates

Biodegradable polymeric nanoparticles are widely recognized as efficacious drug delivery vehicles, yet the rational engineering of nanoparticle surfaces in order to improve biodistribution, reduce clearance, and/or improve targeting remains a significant challenge. We have previously demonstrated that an amphiphilic conjugate of avidin and palmitic acid can be used to modify poly(lactic-co-glycolic acid) (PLGA) particle surfaces to display functional avidin groups, allowing for the facile attachment of biotinylated ligands for targeting or steric stabilization. Here, we hypothesized that the incorporation, density, and stability of surface-presented avidin could be modulated through varying the lipophilicity of its fatty acid conjugate partner. We tested this hypothesis by generating a set of novel conjugates incorporating avidin and common fatty acids. We found that conjugation to linoleic acid resulted in a ~ 60% increase in the incorporation of avidin on the nanoparticle surface compared to avidin–palmitic acid, which exhibited the highest avidin incorporation in previous studies. Further, the linoleic acid–avidin conjugate yielded nanoparticles with enhanced ability to bind biotinylated ligands compared to the previous method; nanoparticles modified with avidin–linoleic acid bound ~ 170% more biotin–HRP than those made with avidin–palmitic acid and ~ 1300% more than particles made without conjugated avidin. Most critically, increased ligand density on anti-CD4-targeted nanoparticles formulated with the linoleic acid–avidin conjugate resulted in a 5% increase in binding of CD4 + T cells. Thus we conclude that the novel avidin–linoleic acid conjugate facilitates enhanced ligand density on PLGA nanoparticles, resulting in functional enhancement of cellular targeting.