Average Size Research Articles

Thermal performance of ecosystems: Modeling how physiological responses to temperature scale up in communities

Understanding how ecosystems respond to their environmental temperature is a major challenge. Thermodynamic constraints on species’ metabolic rates are expected to affect ecosystem characteristics, but species interactions and interspecific variation in physiological thermal response curves (TRC) may obscure ecosystem-level responses to temperature. As a result, macroecological patterns related to temperature are still poorly understood.We investigate how physiological TRC scale up to ecosystem-level thermal responses by modifying the Tangled Nature (TaNa) model, a stochastic network model of ecology and evolution. We include new parameterizations that make reproduction, death, and mutation temperature-dependent. We find that ecosystem survival probability depends on how the minimum fitness required for species survival varies with temperature. The thermal response of ecosystem survival probability is the only ecosystem property that is sensitive to interspecific variation in TRC. Species richness scales up directly from the TRC of mutation rate, and average species population sizes are inversely related to mutation rate, with Species Abundance Distributions (SADs) exhibiting more rare species in warmer temperatures. Interactions between species are also inversely related to mutation, with positive interactions occurring more frequently in colder temperatures. The abundance of surviving ecosystems is not sensitive to temperature. This work helps clarify the specific relationships between physiological responses to temperature and ecosystem-level repercussions when species are interacting and adapting to their thermal environments.

Preparation of 1,3‐Diglyceride Microcapsules with Low Glycemic Index

AbstractA large number of animal and clinical experiments show that 1,3‐diglyceride (1,3‐DAG) can significantly ameliorate obesity by improving blood lipid and glucose metabolism. After microencapsulation, it cannot only be used to prepare full‐nutrient food that meets the nutritional requirements of specific patients, but also improve the storage stability of oils. In this study, 1,3‐DAG microcapsules are prepared by using high‐amylose corn starch, resistant dextrin, and sodium caseinate as composite wall materials, and 1,3‐DAG with a purity of 80% as core material.Firstly, the water phase and oil phase are mixed evenly, and then the uniform emulsion is prepared by two steps of high‐speed shearing and high‐pressure homogenization. The prepared emulsion is desiccated by a spray dryer to prepare microcapsules. Taking the encapsulation rate as the judging criteria, five gradients of core and wall material are designed to obtain the optimal formula.The results show that when the amount of core material is 28% and the wall material is 70%, the encapsulation rate of 99.51% is the highest. The prepared 1,3‐DAG microcapsules have water content of 1.9% and solubility of 98.05%, the average particle size is 2.921 µm. The particles are uniform and stable, with fine color and texture, and a high oil content.

Study of changes in the surface structure of tungsten irradiated by helium plasma

One of the important aspects is the interaction of plasma with the surface of a material, especially in the conditions of a fusion facility. The current work presents the preliminary results of the study of tungsten surface structure modification under helium plasma irradiation. A small-sized linear simulator KAZ-PSI with a plasma-beam setup was designed and assembled, where helium was used as a working gas. The main elements of the linear plasma simulator are an electron beam gun with a LaB6 cathode, a plasma-beam discharge chamber, an interaction chamber, a target device, and an electromagnetic system consisting of electromagnetic coils. It was revealed that under irradiation on the surface of the samples there is a relief with defective structure consisting of chaotically arranged ledges and pits of various shapes with average size (100‒600) nm and pore sizes (0.1‒1.5) μm with visible areas of flaking and sputtering. It was found that when the negative potential on the target is varied by –500V/–1000V/–1500V, the formation of dislocation with chaotic and cellular structure of tungsten with an average grain size of (1‒25) μm is observed; it was revealed that the total values of elastic and plastic components of deformation across the tungsten grain differ from each other by about 2.5 times.

Effect of injection with microelements, jasmonic and citric acid on some date palm c.v Khastawi yield traits

The study was conducted at the Ishaqi palm plant affiliated with the Department of Horticulture/Ministry of Agriculture during the growing season of 2021 on date palm trees of the Khastawi variety to study the response of the yield traits of the Khastawi date palm trees to the injection of microelements, jasmonic and citric acid. The study included three factors: The first factor is the injection of microelements with three treatments: injection with water only, symbolized by D0, iron injection at a concentration of 300 mg, and iron sulfate. Palm1 , symbolized by D1, and boron injection through boric acid at a concentration of 40 mg Palm-1 , symbolized by D2. The second factor is the treatment of injections with the Jasmonic growth regulator, which was injected three days after the injection with the microelements and with the same number of additions (0, 50, 100) micrograms. L-1 is symbolized by G0, G1, and G2 sequentially. The trees were injected with the microelements and the Jasmonic growth regulator before Immunization, after vaccination in 20 days, and after 40 days. The third factor was injection with citric acid and included three levels (0, 500, 1000) mg l-1 symbolized by S0, S1, and S2 sequentially. The results showed that the D2 treatment was significantly superior in the average diameter, length, size and weight of the fruit and the total yield, as it reached 24.86 mm, 3.46 cm, 11.10 cm, 10.07 g, 36.00 kg.palm-1 sequentially, while the comparison treatment gave the lowest average for the traits. As for the effect of jasmonic acid, the injection treatment was superior to (100 µg L-1 ). (G2) gave the highest average for the diameter, length, size, weight of the fruit, and the total yield, which reached 25.90 mm, 3.63 cm, 12.09 cm, 10.93 g, and 35.96 kg. Palm-1, respectively, while the comparison treatment gave the lowest average for the traits above as for the effect of citric acid. The treatment exceeded 1000 mg.L-1 (S2) gave the highest rate in the diameter, length, size, and weight of the fruit, and the total yield, reaching 24.84 mm, 3.49 cm, 11.13 cm, 9.04 g, and 36.30 kg. Palm-1, respectively, while the comparison treatment gave the lowest average for the traits above, as the two- and three-interactions showed. The research factors have significant differences for all the studied traits. Keywords: Trace elements, jasmonic acid, citric acid, Khastawi variety.

Towards understanding the crystallization of photosystem II: influence of poly(ethylene glycol) of various molecular sizes on the micelle formation of alkyl maltosides.

The influence of poly(ethylene glycol) (PEG) polymers H-(O-CH2-CH2)p-OH with different average molecular sizes on the micelle formation of n-alkyl-β-D-maltoside detergents with the number of carbon atoms in the alkyl chain ranging from to is investigated with the aim to learn more about the detergent behavior under conditions suitable for the crystallization of the photosynthetic pigment-protein complex photosystem II. PEG is shown to increase the critical micelle concentration (CMC) of all three detergents in the crystallization buffer in a way that the free energy of micelle formation increases linearly with the concentration of oxyethylene units (O-CH2-CH2) irrespective of the actual molecular weight of the polymer. The CMC shift is modeled by assuming for simplicity that it is dominated by the interaction between PEG and detergent monomers and is interpreted in terms of an increase of the transfer free energy of a methylene group of the alkyl chain by 0.2kJmol-1 per 1mol L-1 increase of the concentration of oxyethylene units at 298K. Implications of this effect for the solubilization and crystallization of protein-detergent complexes as well as detergent extraction from crystals are discussed.

An Integrated Deposition and Passivation Strategy for Controlled Crystallization of 2D/3D Halide Perovskite Films.

This work introduces a simplified deposition procedure for multidimensional (2D/3D) perovskite thin films, integrating a phenethylammonium chloride (PEACl)-treatment into the antisolvent step when forming the 3D perovskite. This simultaneous deposition and passivation strategy reduces the number of synthesis steps while simultaneously stabilizing the halide perovskite film and improving the photovoltaic performance of resulting solar cell devices to 20.8%. Using a combination of multimodal in situ and additional ex situ characterizations, it is demonstrated that the introduction of PEACl during the perovskite film formation slows down the crystal growth process, which leads to a larger average grain size and narrower grain size distribution, thus reducing carrier recombination at grain boundaries and improving the device's performance and stability. The data suggests that during annealing of the wet film, the PEACl diffuses to the surface of the film, forming hydrophobic (quasi-)2D structures that protect the bulk of the perovskite film from humidity-induced degradation.

Porosity and phase composition effects on SHS-NiTi structure and mechanical properties

NiTi samples with 59–70% porosity were obtained by the self-propagating high-temperature synthesis (SHS) using Ti, Ni, and NiTi powders as inert. The maximum and average pore sizes increase, while the maximum and average dimensions of the bridges decrease with porosity, controlled by adjusting the amount of inert additives, based on the surface and cross-sectional microscopy studies. The phase composition of porous NiTi was determined by X-ray diffraction. The alloy contains an austenitic B2 TiNi phase, a martensitic B19′ TiNi phase, and a secondary Ti2Ni phase. SHS-NiTi samples with different porosity were tested by uniaxial compression, revealing mechanical properties’ dependence on porosity. It is shown that with an 11% increase in the NiTi alloy porosity, the yield and compressive strength are reduced by almost a factor of 2.

Optimizing the White Light Emission of Pr3+ Activated SrCeO3 Perovskite by Controlling the Excitation Wavelength for High CRI wLED Applications.

The current research illustrates excitation energy-triggered photoluminescent characteristics of Pr3+ions in SrCeO3 providing a practical approach for developing high CRI wLED and its applications. SrCeO3: xPr3+ (x = 0, 0.005, 0.01, 0.02, 0.03 wt) perovskites synthesized by fuel excess gel combustion method generate high CRI (~98) for wLED applications. Crystalline phosphors with orthorhombic structures having space group Pnma were confirmed by XRD. The unit cell volume expansion occurred with an increase in Pr3+ concentration was verified through the Rietveld refinement technique. Surface morphology, particle distribution, and size were observed via FE-SEM imaging, and detected a well-defined regular distorted spherical structure with average grain size 0.826μm for Pr3+ doped SrCeO3. Elemental mapping and EDS analysis identified the uniform distribution and elemental purity of SrCeO3: 0.01 Pr3+. Further, the molecular vibrations and modes were analyzed from the Raman spectrum. Moreover, the average particle size assessed via TEM analysis was found to be ~83.2nm, consistent with XRD analysis. UV-visible absorption spectra for optical energy-band gap analysis showed a decrease in band gap energy with an increase in Pr3+ concentration, realizing an effective energy transfer from Ce4+ to Pr3+. PL measurements showed a huge variety of emission transitions, corresponding to excitations 290nm, 321nm, 373nm, and 449nm. The critical dopant concentration instigated by concentration quenching was 1 wt% Pr3+, ascribed to dipole-dipole interaction. The fluorescence lifetime of the optimal sample was 4.835μs. Commission International de I'Eclairage (CIE) diagram exposes the white light emanation of SrCeO3: Pr3+. Among which white light with high CRI (~98) and comparably low CCT (~6311K) was obtained for SrCeO3: 0.01 Pr3+ at 373nm excitation. The obtained results recommend that SrCeO3: Pr3+ perovskite as an efficient white phosphor for fabricating high-performance wLEDs.

The potential effects of N-Acyl homoserine lactones on aerobic sludge granulation during phenolic wastewater treatment

The formation of aerobic granular sludge (AGS) is relatively difficult during the treatment of refractory wastewater, which generally shows small granular sizes and poor stability. The formation of AGS is regulated by N-Acyl homoserine lactones (AHLs)-mediated quorum sensing (QS). However, the potential role of AHLs in AGS formation under the toxic stress of refractory pollutants and the heterogeneity in the distribution and function of AHLs across different aggregates are not well understood. This study investigated the potential effects of AHLs on the formation of AGS during phenolic wastewater treatment. The distribution and succession of AHLs across varying granular sizes and development stages of AGS were investigated. Results showed that AGS was successfully formed in 13 days with an average granular size of 335 ± 39 μm and phenol removal efficiency of >99%. The levels of AHLs initially increased and then decreased. C4-HSL and 3-oxo-C10-HSL were enriched in large granules, suggesting they may play a pivotal role in regulating the concentration and composition of extracellular polymeric substances (EPS). The content of EPS constantly increased to 149.4 mg/gVSS, and protein (PN) was enriched in small and large granules. Luteococcus was the dominant genus constituting up to 62% after the granulation process, and exhibited a strong association with C4-HSL. AHLs might also regulate the bacterial community responsible for EPS production, and pollutant removal, and facilitate the proliferation of slow-growing microorganisms, thereby enhancing the formation of AGS. The synthesis and dynamics of AHLs were mainly governed by AHLs-producing bacterial strains of Rhodobacter and Pseudomonas, and AHLs-quenching strains of Flavobacterium and Comamonas. C4-HSL and 3-oxo-C10-HSL might be the major contributors to promoting sludge granulation under phenol stress and play critical roles in large granules. These findings enhance our understanding of the roles that AHLs play in sludge granulation under toxic conditions.

Microstructure and tribological properties of copper/graphite composites with Ti3AlC2 addition prepared by rapid hot press sintering

Copper/graphite composites are widely used due to their excellent electrical, thermal, and self-lubricating properties. However, their mechanical and anti-wear properties are usually limited by brittle graphite and soft copper matrix. Enhancing the properties of composites by further introducing harder ceramic particles is an effective way. However, these particles are usually poorly wetted to metal and can easily separate from the matrix during friction, causing more severe abrasive wear. Herein, TiCx-reinforced Cu/graphite composites were prepared by rapid hot press sintering of a hybrid powder consisting of Ti3AlC2, Cu-plated graphite, and Cu powder. Al atoms diffused out of Ti3AlC2 and solid-solved into the Cu matrix during the sintering process, forming TiCx and Cu(Al) alloys. Such in situ formed TiCx particles have good interfacial bonding with the matrix. With the increase of Ti3AlC2 addition from 0 to 15 wt%, the average grain size of the composites decreased, the relative density increased, the hardness became larger, the electrical conductivity decreased, and the average coefficient of friction were all maintained at about 0.14, but the wear rate was reduced from 3.6569 × 10−4 mm3·N−1·m−1 to 9.35013 × 10−6 mm3·N−1·m−1. The in situ Ti3AlC2-derived TiCx particles improved the deformation resistance and shear resistance of the Cu/graphite composites, thus contributing to the wear resistance. This research may offer fresh perspectives on how to enhance the properties of copper/graphite composites.

Investigating the therapeutic effects and mechanisms of Carthamus tinctorius L.-derived nanovesicles in atherosclerosis treatment

BackgroundCarthamus tinctorius L., a traditional herbal medicine used for atherosclerosis (AS), lacks a clear understanding of its therapeutic mechanisms. This study aimed to investigate the therapeutic effects and mechanisms of Carthamus tinctorius L.-derived nanovesicles (CDNVs) in AS treatment.MethodsCDNVs were isolated and characterized using improved isolation methods. Transmission electron microscopy, nanoparticle tracking analysis, and protein analysis confirmed their morphology, size, and protein composition. Small RNA sequencing was performed to identify the miRNA profile of CDNVs, and bioinformatics analysis was used to determine their potential biological roles. In vivo biodistribution and toxicity studies were conducted in mice to assess the stability and safety of orally administered CDNVs. The anti-atherosclerotic effects of CDNVs were evaluated in ApoE-/- mice through plaque burden analysis. The protective effects of CDNVs on ox-LDL-treated endothelial cells were assessed through proliferation, apoptosis, reactive oxygen species activation, and monocyte adhesion assays. miRNA and mRNA sequencing of CDNV-treated endothelial cells were performed to explore their regulatory effects and potential target genes.ResultsCDNVs were successfully isolated and purified from Carthamus tinctorius L. tissue lysates. They exhibited a saucer-shaped or cup-shaped morphology, with an average particle size of 142.6 ± 0.7 nm, and expressed EV markers CD63 and TSG101. CDNVs contained proteins, small RNAs, and metabolites, including the therapeutic compound HSYA. Small RNA sequencing identified 95 miRNAs, with 10 common miRNAs accounting for 72.63% of the total miRNAs. These miRNAs targeted genes involved in cell adhesion, apoptosis, and cell proliferation, suggesting their relevance in cardiovascular disease. Orally administered CDNVs were stable in the gastrointestinal tract, absorbed into the bloodstream, and accumulated in the liver, lungs, heart, and aorta. They significantly reduced the burden of atherosclerotic plaques in ApoE-/- mice and exhibited superior effects compared to HSYA. In vitro studies demonstrated that CDNVs were taken up by HUVECs, promoted proliferation, attenuated ox-LDL-induced apoptosis and ROS activation, and reduced monocyte adhesion. CDNV treatment resulted in significant changes in miRNA and mRNA expression profiles of HUVECs, with enrichment in inflammation-related genes. CXCL12 was identified as a potential direct target of miR166a-3p.ConclusionCDNVs isolated from Carthamus tinctorius L. tissue lysates represent a promising oral therapeutic option for cardiovascular diseases. The delivery of miRNAs by CDNVs regulates inflammation-related genes, including CXCL12, in HUVECs, suggesting their potential role in modulating endothelial inflammation. These findings provide valuable insights into the therapeutic potential of CDNVs and their miRNAs in cardiovascular disease.

Atmospheric microplastic deposition associated with GDP and population growth: Insights from megacities in northern China

Microplastic (MP) pollution is evolving into one of the most pressing environmental concerns worldwide. This study assessed the impact of economic activities on atmospheric MP pollution across 17 megacities in northern China, analyzing the correlation between the deposition flux of atmospheric MPs and variables such as city population, gross domestic product (GDP), and industrial structure. The results have shown that the MP pollution is obviously impacted by human activities related to increased GDP, population, as well as tertiary service sector, in which the MP pollution shows most close relationship with the GDP growth. Polypropylene, polyamide, polyurethane, and polyethylene were identified as the primary components of atmospheric MPs. The average particle size of MPs in atmospheric dustfall is 78.3 µm, and the frequency of MP particles increases as the particle size decreases. The findings highlight the complex relationship between socio-economic development and atmospheric MP accumulation, providing essential insights for the formulation of targeted emission reduction strategies.

Zirconia Toughened Alumina Ceramics via Forming Intragranular Structure.

The distribution of second phase particles in the microstructure of composite ceramics affects the mechanical properties, and the intragranular structures often result in better properties compared to the intergranular structures. However, it is difficult to obtain composite ceramics with intragranular structure by conventional route. To produce composite ceramics with an intragranular structure in a simpler route. In this work, starting powders with different phase compositions were obtained by the co-precipitation method, and zirconia toughened alumina (ZTA) composite ceramics were prepared with these starting powders by spark plasma sintering (SPS). The results show that it is easier to fabricate ZTA composite ceramics with an intragranular structure by using composite powders containing amorphous or transition phase Al2O3 as starting materials. The phase composition of the powder prepared by the co-precipitation method after calcination at 1100 °C is θ-Al2O3 and t-ZrO2, and the average grain size after sintering at 1500 °C is 1.04 ± 0.28 µm, and the maximum Vickers hardness and fracture toughness of the specimens reach 19.37 ± 0.43 GPa and 6.18 ± 0.06 MPa·m1/2, respectively. The ZrO2 particles were the core of crystallization and grow together with the Al2O3 matrix, forming the intragranular structure of ZTA ceramics. This work may provide a new idea for preparing composite ceramics with intragranular structure.

Ursolic acid loaded tri-block copolymer nanoparticles based on triphenylphosphine for mitochondria-targeted cancer therapy

A novel biodegradable amphiphilic triblock copolymer, polyphosphate, polyethylene glycol, and polylactic acid (PAEEP-PEG-PLLA), was synthesized by twice ring-opening polymerization and triphenylphosphine (TPP) was grafted onto the block copolymer to synthesize a carrier material TPP-PAEEP-PEG-PLLA, which was identified by 1H-nuclear magnetic resonance (1H-NMR) spectroscopy. The TPP-PAEEP-PEG-PLLA nanoparticles encapsulated with ursolic acid (UA) were prepared by the emulsion-solvent evaporation method and characterized by dynamic light scattering. The mitochondrial targeting ability of fluorescently labeled nanoparticles was evaluated by laser confocal microscopy. The average particle size and surface charge of the UA -loaded nanoparticle solution were 180.07 ± 1.67 nm and +15.57 ± 1.33 mV, respectively. The biocompatibility of nanoparticles was briefly evaluated by erythrocyte hemolysis assay. In vitro cell proliferation assay and scratch migration assay were performed to compare the difference in anti-tumor effect between UA and UA nanoparticles. The results showed that TPP-modified triblock copolymers had good mitochondrial targeting and improved the low bioavailability of UA, and UA nanoparticles exhibited more pronounced anti-tumor capabilities. In summary, the results suggested that our UA nanoparticles were a promising drug-targeted delivery system for the treatment of tumors.

Experience of percutaneous closure of small to large patent ductus arteriosus with Nit-Occlud® device in a tertiary referral hospital in Colombia.

The decision to close patent ductus arteriosus should always be individualized and taken together with the child's family once the risks and benefits of both choices have been exposed. This study aims to report the experience and outcomes in patients undergoing endovascular closure of small to medium-size PDA with a Nit-Occlud® device in a tertiary referral hospital in Colombia. Longitudinal descriptive study, which included all patients under 18 years of age who underwent percutaneous ductal closure with Nit-Occlud® device between January 1, 2011, and February 1, 2023. Patients with associated complex congenital heart disease requiring surgical management, pregnant patients, and patients with incomplete data regarding studied variables were excluded from the study. Eighty-seven patients were documented, with a mean age, weight, and height at closure of 51 months, 14 kg, and 95.83 cm, respectively. About 70% of the patients (n = 61) were female, 76% were under 6-years-old and only one patient was over 15. The average size of the ductus at the pulmonary end was 2 mm. Four of the total number of patients did not achieve PDA closure during the procedure. Of the remaining 83, complete immediate closure was achieved in 81 patients. A device exchange for a larger device was required during the same procedure in one of the cases. Two patients presented residual shunt of 0.5 mm during follow-up, and one required a new procedure for device closure 10 months later. Only one device presented repeatedly embolization to the aorta, requiring surgical removal. As a technical difficulty, one device presented repeated passage into the aorta, so it was decided to remove it before releasing it to avoid complications, and given the complex anatomy of the ductus, surgical closure was indicated. Among the complications, one patient presented a hematoma of the subcutaneous tissue in the right thigh, which improved with medical management, and no deaths related to the procedure were registered. Using the Nit-Occlud® device to close small to moderate-sized ductus remains a safe and effective strategy with successful closure rates at 1-year follow-up irrespective of age, weight, height, or whether it involves a small or medium-sized duct. Despite our limitations, results concerning adverse effects are comparable to those observed in multicentric studies conducted in other regions.

Comparative Toxicity of TiO2 and Sn-Doped TiO2 Nanoparticles in Zebrafish After Acute and Chronic Exposure.

This study was conducted to assess the toxicological potential of synthesized pure and Sn-doped TiO2 NPs (Sn-TiO2 NPs) in zebrafish after acute and chronic exposure. The pure TiO2 NPs, 4%, and 8% Sn-TiO2 NPs were synthesized and characterized using X-ray diffraction, Scanning Electron Microscope, diffuse reflectance spectra, dynamic light scattering, and zeta potential analyses. The pure TiO2 NPs, 4%, and 8% Sn-TiO2 NPs were spherical with average sizes of about 40, 28, and 21 nm, respectively, indicating significant size reduction of TiO2 NPs following Sn doping. According to our results, the LC50-96h increased in the order of 8% Sn-TiO2 NPs (45 mg L-1) < 4% Sn-TiO2 NPs (80.14 mg L-1) < pure TiO2 NPs (105.47 mg L-1), respectively. Exposure of fish to Sn-TiO2 NPs after 30 days resulted in more severe histopathological alterations in gills, liver, intestine, and kidneys than pure TiO2 NPs. Furthermore, Sn-doping significantly elevated malondialdehyde levels and micronuclei frequency, indicating increased oxidative stress and genotoxicity. Expression analysis revealed altered expression of various genes, including upregulation of pro-apoptotic Bax gene and downregulation of anti-apoptotic Bcl-2 gene, suggesting potential induction of apoptosis in response to Sn-doped NPs. Additionally, antioxidant genes (Gpx, Sod, Cat, and Ucp-2) and stress response gene (Hsp70) showed altered expression, suggesting complex cellular responses to mitigate the toxic effects. Overall, this study highlights the concerning impact of Sn-doping on the toxicity of TiO2 NPs in zebrafish and emphasizes the need for further research to elucidate the exact mechanisms underlying this enhanced toxicity.

Synergistic Effect of Electrocatalyst for Enhanced Oxygen Reduction Reaction: Low Pt-Loaded CuPt Alloy Nanoparticles Supported on N-Doped Hierarchical Porous Carbon.

It is challenging to synthesize oxygen reduction reaction (ORR) electrocatalysts that are highly efficient, affordable, and stable for use in proton exchange membrane fuel cells. To address this challenge, we developed a low platinum-loading (only 6.68% wt) ORR catalyst (PtCu1-NC), comprising CuPt nanoparticles (average size: 1.51 nm) supported on the N-doped carbon substrates. PtCu1-NC possesses a high specific surface area of 662 m2 g-1 and a hierarchical porous structure, facilitating efficient mass transfer. The synergistic effect from introduced copper and the electron effect from nitrogen modify the electronic structure of platinum, effectively accelerating the ORR reaction and enhancing stability. Density functional theory calculations demonstrate the catalytic mechanism and further verify the synergistic effect. Electrochemical assessments indicate that PtCu1-NC exhibits specific activity and mass activity 5.3 and 5.6 times higher, respectively, than commercial Pt/C. The half-wave potential is 27 mV more positive than that of commercial Pt/C. The electrochemical active surface area value is 104.3 m2 g-1, surpassing that of Pt/C. Approximately 78% of current is retained after 10,000 s chronoamperometry measurement. These results highlight the effectiveness of alloying in improving the catalyst performance.

Insight into the Effects of Hydrodynamic Cavitation at Different Ionic Strengths on Physicochemical and Gel Properties of Myofibrillar Protein from Tilapia (Oreochromis niloticus).

Effects of different ionic strengths (0.2, 0.4, and 0.6 mol/L) and different hydrodynamic cavitation (HC) treatment times (0, 1, 2, 3, and 4 min) on the conformation and gel properties of tilapia myofibrillar proteins (TMP) were investigated. The results showed that the solubility of TMP was significantly enhanced (p < 0.05) with the increase in NaCl concentration, and the gel characteristics were significantly improved. After HC treatment of TMP, the average particle size was significantly reduced (p < 0.05) and solubility was significantly enhanced (p < 0.05) with the increase in treatment time, the internal hydrophobic groups and reactive sulfhydryl groups were exposed. The intrinsic fluorescence spectra showed the unfolding of the spatial tertiary structure of proteins, and the circular dichroism spectroscopy showed the significant reduction in the content of α-helix in the secondary structure of the proteins (p < 0.05). In addition, the WHC and gel strength of the TMP heat-induced gels were enhanced, which improved the microstructure of the gels, and scanning electron microscopy showed that the gel network of the TMP gels became denser and more homogeneous. Dynamic rheology results showed that HC treatment resulted in a significant increase in the final G' and G" values of TMP. In conclusion, HC treatment was able to improve the physicochemical structure and gel properties of TMP at different ionic strengths. This study presents a novel processing technique for the quality maintenance aspect of salt-reduced surimi gel products.

Genetic linkage map construction and QTL analysis for plant height in proso millet (Panicum miliaceum L.).

A genetic linkage map representing proso millet genome was constructed with SSR markers, and a major QTL corresponding to plant height was mapped on chromosome 14 of this map. Proso millet (Panicum miliaceum L.) has the lowest water requirements of all cultivated cereal crops. However, the lack of a genetic map and the paucity of genomic resources for this species have limited the utility of proso millet for detailed genetic studies and hampered genetic improvement programs. In this study, 97,317 simple sequence repeat (SSR) markers were developed based on the genome sequence of the proso millet landrace Longmi 4. Using some of these markers in conjunction with previously identified SSRs, an SSR-based linkage map for proso millet was successfully constructed using a large mapping population (316 F2 offspring). In total, 186 SSR markers were assigned to 18 linkage groups corresponding to the haploid chromosomes. The constructed map had a total length of 3033.42 centimorgan (cM) covering 78.17% of the assembled reference genome. The length of the 18 linkage groups ranged from 88.89cM (Chr. 15) to 274.82cM (Chr. 16), with an average size of 168.17cM. To our knowledge, this is the first genetic linkage map for proso millet based on SSR markers. Plant height is one of the most important traits in crop improvement. A major QTL was repeatedly detected in different environments, explaining 8.70-24.50% of the plant height variations. A candidate gene affecting auxin biosynthesis and transport, and ROS homeostasis regulation was predicted. Thus, the linkage map and QTL analysis provided herein will promote the development of gene mining and molecular breeding in proso millet.

Temperature-Dependent Swelling in Helium Ion Irradiated Vanadium

Vanadium is a typical low-activation metal and has the advantages of lower neutron irradiation activation, better mechanical properties at high temperature, and higher compatibility with the liquid lithium blanket. However, the effect of helium on the formation of irradiation defects in vanadium has not been adequately explored at low temperatures (below 723 K). Helium ion irradiations of 18 keV up to 0.54 displacement per atom were employed to study the temperature-dependent behavior of irradiation defects in vanadium at 523, 623, and 723 K. Helium bubbles were observed in vanadium under irradiations at all temperatures, but no dislocation loops were observed. With the increase of irradiation temperature, the average size of helium bubbles and swelling increased, and the density of helium bubbles decreased. It is noteworthy that the average size of helium bubbles and swelling increased significantly when the irradiation temperature increased from 623 to 723 K. In addition, pentagonal helium bubbles, helium bubbles nucleated at the grain boundary, and combinations between helium bubbles were observed.