Average Dissociation Constant Research Articles

Binding Affinity Studies of Nicotinamide N-methyltransferase and Ligands by Saturation Transfer Difference NMR.

Nicotinamide N-methyltransferase (NNMT) catalyzes the N-methylation of nicotinamide with S-adenosine-L-methionine (SAM) as the methyl donor. Abnormal expression of NNMT is associated with many diseases (such as multiple cancers and metabolic and liver diseases), making NNMT a potential therapeutic target. Limited studies concerning the enzymesubstrate/ inhibitor interactions could be found to fully understand the detailed reaction mechanism. The binding affinity and ligand binding epitopes of nicotinamide or SAH for binding NNMT and its mutants were determined using saturated transfer difference (STD) nuclear magnetic resonance (NMR) techniques combined with site-directed mutagenesis. The average dissociation constant of WT NNMT with nicotinamide and S-adenosine homocysteine (SAH) was 5.5 ± 0.9 mM and 1.2 ± 0.3 mM, respectively, while the mutants Y20F and Y20G with nicotinamide were up to nearly 4 times and 20 times that of WT and with SAH nearly 2 times and 5 times that of WT. The data suggested that WT had the highest binding affinity for nicotinamide or SAH, followed by Y20F and Y20G, which was consistent with its catalytic activity. The binding affinity of nicotinamide and SAH to NNMT and its mutants were obtained by STD NMR in this study. It was found that nicotinamide and SAH bind to WT in a particular orientation, and Y20 is critical for their binding orientation and affinity to NNMT.

Molecular Insights into a Novel Cu(I)-Sensitive ArsR/SmtB Family Repressor in Extremophile Acidithiobacillus caldus.

Acidithiobacillus caldus is a common bioleaching bacterium that is inevitably exposed to extreme copper stress in leachates. The ArsR/SmtB family of metalloregulatory repressors regulates homeostasis and resistance in bacteria by specifically responding to metals. Here, we characterized A. caldus Cu(I)-sensitive repressor (AcsR) and gained molecular insights into this new member of the ArsR/SmtB family. Transcriptional analysis indicated that the promoter (PIII) of acsR was highly active in Escherichia coli but inhibited upon AcsR binding to the PIII-acsR region. Size exclusion chromatography and circular dichroism spectra revealed that CuI-AcsR shared an identical assembly state with apo-AcsR, as a dimer with fewer α helices, more extended strands, and more β turns. Mutation of the cysteine site in AcsR did not affect its assembly state. Copper(I) titrations revealed that apo-AcsR bound two Cu(I) molecules per monomer in vitro with an average dissociation constant (KD) for bicinchoninic acid competition of 2.55 × 10-9 M. Site-directed mutation of putative Cu(I)-binding ligands in AcsR showed that replacing Cys64 with Ala reduces copper binding ability from two Cu(I) molecules per monomer to one, with an average KD of 6.05 × 10-9 M. Electrophoretic mobility shift assays revealed that apo-AcsR has high affinity for the 12-2-12 imperfect inverted repeats P2245 and P2270 in the acsR gene cluster and that Cu-loaded AcsR had lower affinity for DNA fragments than apo-AcsR. We developed a hypothetical working model of AcsR to better understand Cu resistance mechanisms in A. caldus. IMPORTANCE Copper (Cu) resistance among various microorganisms is attracting interest. The chemolithoautotrophic bacterium A. caldus, which can tolerate extreme copper stress (≥10 g/L Cu ions), is typically used to bioleach chalcopyrite (CuFeS2). Understanding of Cu resistance in A. caldus is limited due to scant investigation and the absence of efficient gene manipulation tools. Here, we characterized a new member of the ArsR/SmtB family of prokaryotic metalloregulatory transcriptional proteins that repress operons linked to stress-inducing concentrations of heavy metal ions. This protein can bind two Cu(I) molecules per monomer and negatively regulate its gene cluster. Members of the ArsR/SmtB family have not been investigated in A. caldus until now. The discovery of this novel protein enriches understanding of Cu homeostasis in A. caldus.

Insights into the Genetic Variations of Human Cytochrome P450 2C9: Structural Analysis, Characterization and Comparison.

Cytochromes P450 (CYP) are one of the major xenobiotic metabolizing enzymes with increasing importance in pharmacogenetics. The CYP2C9 enzyme is responsible for the metabolism of a wide range of clinical drugs. More than sixty genetic variations have been identified in CYP2C9 with many demonstrating reduced activity compared to the wild-type (WT) enzyme. The CYP2C9*8 allele is predominantly found in persons of African ancestry and results in altered clearance of several drug substrates of CYP2C9. The X-ray crystal structure of CYP2C9*8, which represents an amino acid variation from arginine to histidine at position 150 (R150H), was solved in complex with losartan. The overall conformation of the CYP2C9*8-losartan complex was similar to the previously solved complex with wild type (WT) protein, but it differs in the occupancy of losartan. One molecule of losartan was bound in the active site and another on the surface in an identical orientation to that observed in the WT complex. However, unlike the WT structure, the losartan in the access channel was not observed in the *8 complex. Furthermore, isothermal titration calorimetry studies illustrated weaker binding of losartan to *8 compared to WT. Interestingly, the CYP2C9*8 interaction with losartan was not as weak as the CYP2C9*3 variant, which showed up to three-fold weaker average dissociation constant compared to the WT. Taken together, the structural and solution characterization yields insights into the similarities and differences of losartan binding to CYP2C9 variants and provides a useful framework for probing the role of amino acid substitution and substrate dependent activity.

Molecular Insights into the Copper-Sensitive Operon Repressor in Acidithiobacillus caldus.

The copper-sensitive operon repressor (CsoR) family, which is the main Cu(I)-sensing family, is widely distributed and regulates regulons involved in detoxification in response to extreme copper stress (a general range of ≥3 g/liter copper ions). Here, we identified CsoR in hyper-copper-resistant Acidithiobacillus caldus (CsoRAc), an organism used in the bioleaching process of copper ores. CsoRAc possesses highly conserved Cu(I) ligands and structures within the CsoR family members. Transcriptional analysis assays indicated that the promoter (PIII) of csoR was active but weakly responsive to copper in Escherichia coli. Copper titration assays gave a stoichiometry of 0.8 mol Cu(I) per apo-CsoRAc monomer in vitro combined with atomic absorption spectroscopy analysis. CuI-CsoRAc and apo-CsoRAc share essentially identical secondary structures and assembly states, as demonstrated by circular dichroism spectra and size exclusion chromatography profiles. The average dissociation constants (KD = 2.26 × 10-18 M and 0.53 × 10-15 M) and Cu(I) binding affinity of apo-CsoRAc were estimated by bathocuproine disulfonate (BCS) and bicinchoninic acid (BCA) competition assays, respectively. Site-directed mutations of conserved Cu(I) ligands in CsoRAc did not significantly alter the secondary structure or assembly state. Competition assays showed that mutants had the same order of magnitude of Cu(I) binding affinity as apo-CsoRAc. Moreover, apo-CsoRAc could bind to the DNA fragment P08430 in vitro, although with low affinity. Finally, a working model was developed to illustrate putative copper resistance mechanisms in A. caldus. IMPORTANCE Research on copper resistance among various species has attracted considerable interest. However, due to the lack of effective and reproducible genetic tools, few studies regarding copper resistance have been reported for A. caldus. Here, we characterized a major Cu(I)-sensing family protein, CsoRAc, which binds Cu(I) with an attomolar affinity higher than that of the Cu(I)-specific chelator bathocuproine disulfonate. In particular, CsoR family proteins were identified only in A. caldus, rather than A. ferrooxidans and A. thiooxidans, which are both used for bioleaching. Meanwhile, A. caldus harbored more copper resistance determinants and a relatively full-scale regulatory system involved in copper homeostasis. These observations suggested that A. caldus may play an essential role in the application of engineered strains with higher copper resistance in the near future.

Biochemical and Biophysical Characterization of Pharmacogenetic Variants of Human Cytochrome P450 2C9

Cytochromes P450 (CYP) are a superfamily of heme-containing enzymes essential in the metabolism of various xenobiotics. The drug metabolizing CYP2C9 enzyme metabolizes up to 15-20% of the medications that include warfarin, losartan, tolbutamide, and glimepiride. Genetic variations in CYP2C9 gene that include the more prevalent *2, *3, and *8, as well as the less common *28 and *30 alleles, have resulted in reduced enzyme activity leading to altered metabolism of various drug substrates compared with the wild-type (WT). The CYP2C9*2 and *3 genetic variants represent an amino acid change from arginine to cysteine at position 144 (R144C) and isoleucine to leucine at position 159 (I359L), respectively. Whereas, the CYP2C9*8, *28 and *30 represents amino acid substitution from arginine to histidine at positions 150 (R150H), glutamine to leucine at 214 (Q214L) and alanine to threonine at 477 (A477T), respectively. These CYP2C9 variants were recombinantly expressed and purified with an aim to characterize the binding of the drug substrate losartan using enzymatic and thermodynamic approaches. The activity of the enzyme was measured in the reconstituted system containing P450 reductase and losartan by the consumption of NADPH or change in absorbance at 340 nm. The *3 variant demonstrated a significantly reduced ability to turn over the losartan substrate compared to the WT and the other variants. Furthermore, differential scanning fluorimetry confirmed lower thermal stability of the *2 and *3 variants in the presence or absence of losartan compared to the WT or *8 variant. This was consistent to the weaker binding affinity of losartan to these two variants as elucidated by isothermal titration calorimetry. The average apparent dissociation constant (KD) for losartan binding to CYP2C9*3 was more than three-fold lower than the WT enzyme. Whereas the KD value for losartan binding to CYP2C9*8 did not show any significant difference. Overall, functional characterization of these variants provide insights into the enzyme activity and binding of drug substrates to CYP2C9, and help improve our understanding of the effect of amino acid substitutions on drug metabolism.

Development of Aptamer-Based Molecular Tools for Rapid Intraoperative Diagnosis and In Vivo Imaging of Serous Ovarian Cancer.

Diagnosis and treatment of ovarian cancer are based on intraoperative pathology and debulking surgery. The development of a novel molecular tool is significant for rapid intraoperative pathologic diagnosis, which instructs the decision-making on excision surgery and effective chemotherapy. In this work, we represent a DNA aptamer named mApoc46, which is generated from cell-SELEX by targeting patient-derived primary serous ovarian cancer (pSOC) cells. An average dissociation constant (Kd) was determined to be 0.15 ± 0.05 μM by flow cytometry. The mApoc46 aptamer displays a robust specificity to pSOC cells. Labeled with FAM, mApoc46 can selectively stain living pSOC cells in 30 min without staining commercial OC cell lines and cell lines associated with other cancers. Interestingly, FAM-mApoc46 displayed superb selectivity toward high-grade serous ovarian cancer (HG-SOC) tissues in frozen sections against low-grade SOC, ovarian borderline tumor, other nonepithelial ovarian tumors, and healthy ovarian tissue. These results lead to a potential application in the identification of OCs' histological subtypes during operation. In the patient-derived tumor xenograft NCG mice model, Cy5-labeled mApoc46 was found to accumulate at the tumor area and served as an in vivo imaging probe. The mApoc46 probe shows a robust and stable performance to visualize SOC tumors in the body. Therefore, aptamer mApoc46 holds great potential in rapid intraoperative detection, pathological diagnosis, fluorescence image-guided cancer surgery, and targeted drug delivery and therapy.

Efficient and robust isolation of rabbit scFv antibodies using antigen-coupled multilamellar vesicles

We demonstrated an efficient screening method for rabbit scFv antibodies using antigen-coupled multi-lamellar vesicles (Ag-MLVs) as solid supports. Model phages displaying mouse anti-human IgG scFv at a probability of 10-4-10-5% were successfully isolated by Ag-MLVs after 3 or less rounds of biopanning, whereas they could not be isolated using conventional antigen-coated immunotubes. This screening method was applied to isolate rabbit antigen-specific scFvs from 4 different phage libraries. Biopanning procedures employing Ag-MLVs yielded positive phages in the 3rd round or earlier, and specific antigen-binding of scFvs was observed after the 1st round in two biopanning selections. The dissociation rate constants (koff) of isolated scFv clones tended to decrease with progressing biopanning rounds. The average dissociation constants (KD) of the isolated scFvs ranged between 1.7 and 87nM, whereas the lowest KD of 12 pM was recorded for anti-CRP scFv. Comprehensive characterization of 355 different clones of the isolated rabbit scFvs presented a relatively low isoelectric point, and most of these were more thermo-stable than the conventional mouse scFvs, based on their instability and aliphatic indices. These results clearly indicate the advantages and potential of a combination of rabbit scFv-displaying phage library and biopanning using Ag-MLVs for antibody discovery. In addition, the results obtained in this study support the suitability of rabbit scFvs for several applications, including the development of diagnostic agents and affinity ligands for molecular diagnosis and bioseparation.

Mechanistic modelling of ammonia emission from laying hen manure at laboratory scale

A mechanistic model was developed for estimating ammonia (NH3) emission from laying hen manure based on measurements from a laboratory-scale wind-tunnel experiment. Ammonia emissions were measured continuously for 3–6 d from manure samples under 17 different combinations of air temperatures (20.0–33.5°C) and air velocities (0.25–1.17 m s−1). The convective mass transfer coefficient, KG, which was estimated using chamber air velocity and temperature, averaged 6.81 ± 4.04 m h−1 and ranged from 0.47 to 16.76 m h−1 (R2 = 0.91). The average dissociation constant ratio α, estimated as a function of manure pH and moisture content, was 0.175 ± 0.103 (R2 = 0.81). Total ammonia nitrogen (TAN) has been reported in the literature as a key factor influencing NH3 emission from manure, however, its influence observed in these laboratory studies was statistically insignificant (p = 0.16). The model was developed using two independent groups of experimental data, one for model training, and the other for model validation. The model had adequate accuracy in estimating NH3 emission from layer manure with normalised mean squared error (NMSE) of 0.08 and R2 of 0.79. Sensitivity analyses suggested that NH3 emission was most sensitive to manure pH, followed by air temperature and air velocity. The results can serve as a basis for developing a reliable, practical and simple NH3 emission estimation model for determining compliance with NH3 emission regulations and developing effective mitigation strategies.

Experimental and modeling study of proton and copper binding properties onto fulvic acid fractions using spectroscopic techniques combined with two-dimensional correlation analysis

Fulvic acid (FA) significantly influences the bioavailability and fate of heavy metals in environments, while its acid-base characters and metal binding processes are still unclear. Here, spectroscopic techniques combined with multiple models (e.g., NICA-Donnan model) and two-dimensional correlation spectroscopy (2D COS) were applied to explore the proton and copper binding properties of FA sub-fractions (FA3-FA13). The charge densities, average contents of carboxylic and phenolic groups, average dissociation constants pKa1 and pKa2 of sub-fractions ranged 0–16 meq∙g∙C−1, 5.03–9.58 meq∙g∙C−1, 2.52–4.67 meq∙g∙C−1, 4.15–4.33 and 8.52–9.72, respectively. FA sub-fractions had a relatively narrow distribution of carboxyl group and a broad distribution of phenolic group. FA sub-fractions also exhibited roughly two phenolic hydroxyl groups per every 1–3 phenyl rings. Differential absorbance spectra (DAS) derived Gaussian bands were associated to the inter-chromophore interactions, the changes of molecular conformations and functional groups with copper addition. Differential spectra slopes (DSlope275-295&325-375) were more significant with higher copper concentration and copper amounts bonded to carboxylic groups. UV–Vis and fluorescence spectra with 2D heterospectral COS revealed the copper binding heterogeneities and sequential orders of chromophores and fluorophores, quantitatively confirming by the order of conditional stability constants (log KCu: 4.64–5.56). Salicylic-/polyhydroxyphenolic, hydroxyl and amino groups were strongly associated to the basic units for fluorophores. Sequential changes followed the order of humic-like→fulvic-like materials for FA3/FA5, humic-like→fulvic-like→tryptophan-like materials for FA7, and humic-like→tryptophan-like→fulvic-like→tyrosine-like materials for FA9/FA13. Spectroscopic techniques combined with various models (especially for 2D COS) are beneficial to elucidate the binding heterogeneity and sensitivity for metal-organic matters at the functional group level.

Cross-linking of diluted alkali-soluble pectin from apple (Malus domestica fruit) in different acid-base conditions

A diluted alkali-soluble pectin (DASP) fraction, extracted using sodium carbonate, is characterized by a low degree of methylesterification and has the ability to self-organize on mica. The aim of this study was to characterize the cross-linking process of this fraction, extracted from apples, over a wide pH range (3-11) and without the addition of salt. An FT-IR study showed an increase in the intensity of bands connected with νas and νs (COO−) and a decrease in the intensity of the band associated with ν (C=O) in the carboxyl group with increasing pH, which indicated the dissociation of the carboxyl groups of galacturonic acid units. An increase in the surface electrical charge of particles in the pH range of 3–7 confirmed this. The value of the average apparent dissociation constant (∼4.60) indicated the acidic character of the DASP fraction. An AFM study showed the morphological changes of the DASP fraction with increasing pH, which allowed for the evaluation of the cross-linking process. This fraction formed a network on mica at pH 4 and 9, while the aggregates were noted mainly at pH 11. For totally ionized carboxyl groups (pH 7), the pectin chains were separated from each other due to the electrostatic repulsion between them.

Input of different kinds of soluble pectin to cation binding properties of roots cell walls

It is widely believed that pectin are responsible for the vast majority of cation binding positions in the root cell walls. To estimate the role of particular kinds of pectin, we studied the cell wall material isolated from the roots of monocots (wheat and rye) and dicots (clover and lupine) before and after removal of different fractions of soluble pectin. Simultaneously PME activity and degree of pectin methylation were determined. From potentiometric titration curves cation exchange capacity, total surface charge and acidic strength of surface functional groups responsible for surface charging were determined. Monocots had smaller cation exchange capacity and lower pectin content than dicots. Removal of pectin induced up to 50% reduction in the cell walls surface charge. Pectin seem to have more acidic character than the other roots components that is seen from an increase in very weakly acidic groups fraction and significant decrease in the average dissociation constant of the cell walls material after pectin removal. Water soluble pectin and non-pectic soluble compounds had the dominant role in surface charging, while chelator and diluted alkali soluble pectin contributed to surface charge only at high pH's.

Biochemical and spectroscopic characterization of dinuclear Mn-sites in artificial four-helix bundle proteins

To better understand metalloproteins with Mn-clusters, we have designed artificial four-helix bundles to have one, two, or three dinuclear metal centers able to bind Mn(II). Circular dichroism measurements showed that the Mn-proteins have substantial α-helix content, and analysis of electron paramagnetic resonance spectra is consistent with the designed number of bound Mn-clusters. The Mn-proteins were shown to catalyze the conversion of hydrogen peroxide into molecular oxygen. The loss of hydrogen peroxide was dependent upon the concentration of protein with bound Mn, with the proteins containing multiple Mn-clusters showing greater activity. Using an oxygen sensor, the oxygen concentration was found to increase with a rate up to 0.4μM/min, which was dependent upon the concentrations of hydrogen peroxide and the Mn-protein. In addition, the Mn-proteins were shown to serve as electron donors to bacterial reaction centers using optical spectroscopy. Similar binding of the Mn-proteins to reaction centers was observed with an average dissociation constant of 2.3μM. The Mn-proteins with three metal centers were more effective at this electron transfer reaction than the Mn-proteins with one or two metal centers. Thus, multiple Mn-clusters can be incorporated into four-helix bundles with the capability of performing catalysis and electron transfer to a natural protein.

Molecular Aspects of a Robust Assay for Ferroxidase Function of Ceruloplasmin.

Ceruloplasmin (Cp) is one of the most complex multicopper oxidase enzymes and plays an essential role in the metabolism of iron in mammals. Ferrous ion supplied by the ferroportin exporter is converted by Cp to ferric ion that is accepted by plasma metallo-chaperone transferrin. Study of the enzyme at the atomic and molecular level has been hampered by the lack of a suitable ferrous substrate. We have developed the classic chromophoric complex FeIIHx(Tar)2 (H2Tar, 4-(2-thiazolylazo)resorcinol; x = 0-2; overall charge omitted) as a robust substrate for evaluation of the ferroxidase function of Cp and related enzymes. The catalysis can be followed conveniently in real time by monitoring the solution absorbance at 720 nm, a fingerprint of FeIIHx(Tar)2. The complex is oxidized to its ferric form FeIIIHx(Tar)2 via the overall reaction sequence FeIIHx(Tar)2 → FeII-Cp → FeIII-Cp → FeIIIHx(Tar)2: i.e., Fe(II) is transferred formally from FeIIHx(Tar)2 to the substrate docking/oxidation (SDO) site(s) in Cp, followed by oxidation to product Fe(III) that is trapped again by the ligand. Each Tar ligand in the above bis-complex coordinates the metal center in a meridional tridentate mode involving a pH-sensitive -OH group (pKa > 12), and this imposes rapid Fe(II) and Fe(III) transfer kinetics to facilitate the catalytic process. The formation constants of both the ferrous and ferric complexes at pH 7.0 were determined (log β2' = 13.6 and 21.6, respectively), as well as an average dissociation constant of the SDO site(s) in Cp (log KD' = -7.2).

A Nucleolar PUF RNA-binding Protein with Specificity for a Unique RNA Sequence

PUF proteins are a conserved group of sequence specific RNA-binding proteins that bind to RNA in a modular fashion. The RNA-binding domain of PUF proteins typically consists of eight clustered Puf repeats. Plant genomes code for large families of PUF proteins that show significant variability in their predicted Puf repeat number, organization, and amino acid sequence. Here we sought to determine whether the observed variability in the RNA-binding domains of four plant PUFs results in a preference for nonclassical PUF RNA target sequences. We report the identification of a novel RNA binding sequence for a nucleolar Arabidopsis PUF protein that contains an atypical RNA-binding domain. The Arabidopsis PUM23 (APUM23) binding sequence was 10 nucleotides in length, contained a centrally located UUGA core element, and had a preferred cytosine at nucleotide position 8. These RNA sequence characteristics differ from those of other PUF proteins, because all natural PUFs studied to date bind to RNAs that contain a conserved UGU sequence at their 5' end and lack specificity for cytosine. Gel mobility shift assays validated the identity of the APUM23 binding sequence and supported the location of 3 of the 10 predicted Puf repeats in APUM23, including the cytosine-binding repeat. The preferred 10-nucleotide sequence bound by APUM23 is present within the 18S rRNA sequence, supporting the known role of APUM23 in 18S rRNA maturation. This work also reveals that APUM23, an ortholog of yeast Nop9, could provide an advanced structural backbone for Puf repeat engineering and target-specific regulation of cellular RNAs.

High-affinity binding to staphylococcal protein A by an engineered dimeric Affibody molecule

Affibody molecules are engineered binding proteins, in which the three-helix bundle motif of the Z domain derived from protein A is used as a scaffold for sequence variation. We used phage display to select Affibody binders to staphylococcal protein A itself. The best binder, called ZpA963, binds with similar affinity and kinetics to the five homologous E, D, A, B and C domains of protein A, and to a five-domain protein A construct with an average dissociation constant, K(D), of ~20 nM. The structure of ZpA963 in complex with the Z domain shows that it interacts with a surface on Z that is identical in the five protein A domains, which explains the multi-domain affinity. This property allows for high-affinity binding by dimeric Affibody molecules that simultaneously engage two protein A domains in a complex. We studied two ZpA963 dimers in which the subunits were linked by a C-terminal disulfide in a symmetric dimer or head-to-tail in a fusion protein, respectively. The dimers both bind protein A with high affinity, very slow off-rates and with saturation-dependent kinetics that can be understood in terms of dimer binding to multiple sites. The head-to-tail (ZpA963)2htt dimer binds with an off-rate of k(off) ≤ 5 × 10(-6) s(-1) and an estimated K(D) ≤ 16 pM. The results illustrate how dimers of selected monomer binding proteins can provide an efficient route for engineering of high-affinity binders to targets that contain multiple homologous domains or repeated structural units.

Quantitative affinity electrophoresis of RNA–small molecule interactions by cross-linking the ligand to acrylamide

We show that the affinity electrophoresis analysis of RNA–small molecule interactions can be made quantifiable by cross-linking the ligand to the gel matrix. Using an RNA–aminoglycoside model system to verify our method, we attached an acryloyl chloride molecule to the aminoglycosides paromomycin and neomycin B to synthesize an acrylamide–aminoglycoside monomer. This molecule was then used as a component in gel polymerization for affinity electrophoresis, covalently attaching an aminoglycoside molecule to the gel matrix. To test RNA binding to the cross-linked aminoglycosides, we used the aminoglycoside binding RNA molecule derived from thymidylate synthase messenger RNA (mRNA) that contains a C–C mismatch. Binding is indicated by the difference in RNA mobility between gels with cross-linked ligand, with ligand embedded during polymerization, and with no ligand present. Critically, the predicted straight line relationship between the reciprocal of the relative migration of the RNA and the ligand concentration is obtained when using cross-linked aminoglycosides, whereas a straight line is not obtained using embedded aminoglycosides. Average apparent dissociation constants are determined from the slope of the line from these plots. This method allows an easy quantitative comparison between different nucleic acid molecules for a small molecule ligand.

VAPC, an Human Endogenous Inhibitor for Hepatitis C Virus (HCV) Infection, Is Intrinsically Unstructured but Forms a “Fuzzy Complex” with HCV NS5B

Nearly 200 million people are infected by hepatitis C virus (HCV) worldwide. For replicating the HCV genome, the membrane-associated machinery needs to be formed by both HCV non-structural proteins (including NS5B) and human host factors such as VAPB. Recently, the 99-residue VAPC, a splicing variant of VAPB, was demonstrated to inhibit HCV replication via binding to NS5B, thus acting as an endogenous inhibitor of HCV infection. So far, the structure of VAPC remains unknown, and its interaction with NS5B has not been biophysically characterized. In this study, we conducted extensive CD and NMR investigations on VAPC which led to several striking findings: 1) although the N-terminal 70 residues are identical in VAPC and VAPB, they constitute the characteristic β-barrel MSP fold in VAPB, while VAPC is entirely unstructured in solution, only with helical-like conformations weakly populated. 2) VAPC is indeed capable of binding to NS5B, with an average dissociation constant (Kd) of ∼20 µM. Intriguingly, VAPC remains dynamic even in the complex, suggesting that the VAPC-NS5B is a “fuzzy complex”. 3) NMR mapping revealed that the major binding region for NS5B is located over the C-terminal half of VAPC, which is composed of three discrete clusters, of which only the first contains the region identical in VAPC and VAPB. The second region containing ∼12 residues appears to play a key role in binding since mutation of 4 residues within this region leads to almost complete loss of the binding activity. 4) A 14-residue mimetic, VAPC-14 containing the second region, only has a ∼3-fold reduction of the affinity. Our study not only provides critical insights into how a human factor mediates the formation of the HCV replication machinery, but also leads to design of VAPC-14 which may be further used to explore the function of VAPC and to develop anti-HCV molecules.

Intrinsically Unstructured Domain 3 of Hepatitis C Virus NS5A Forms a “Fuzzy Complex” with VAPB-MSP Domain Which Carries ALS-Causing Mutations

Hepatitis C virus (HCV) affects nearly 200 million people worldwide and is a leading factor for serious chronic liver diseases. For replicating HCV genome, the membrane-associated replication machinery needs to be formed by both HCV non-structural proteins including NS5A and human host factors. Recently NS5A has been identified to bind ER-anchored human VAP proteins and consequently this interaction may serve as a novel target for design of anti-HCV drugs. So far no biophysical characterization of this interaction has been reported. Here, we dissected the 243-residue VAPB into 4 and 447-residue NS5A into 10 fragments, followed by CD and NMR characterization of their structural properties. Subsequently, binding interactions between these fragments have been extensively assessed by NMR HSQC titration which is very powerful in detecting even very weak binding. The studies lead to three important findings: 1). a “fuzzy complex” is formed between the intrinsically-unstructured third domain (D3) of NS5A and the well-structured MSP domain of VAPB, with an average dissociation constant (Kd) of ∼5 µM. 2). The binding-important residues on both NS5A-D3 and VAPB-MSP have been successfully mapped out, which provided experimental constraints for constructing the complex structure. In the complex, unstructured D3 binds to three surface pockets on one side of the MSP structure. Interestingly, two ALS-causing mutations T46I and P56S are also located on the D3-MSP interface. Moreover, NS5A-D3, FFAT-containing proteins and EphA4 appear to have overlapped binding interfaces on the MSP domain. 3). NS5A-D3 has been experimentally confirmed to competes with EphA4 in binding to the MSP domain, and T46I mutation of MSP dramatically abolishes its binding ability to D3. Our study not only provides essential foundation for further deciphering structure and function of the HCV replication machinery, but may also shed light on rationalizing a recent observation that a chronic HCV patient surprisingly developed ALS-like syndrome.

Evolutionary Remodeling of βγ-Crystallins for Domain Stability at Cost of Ca2+ Binding

The topologically similar βγ-crystallins that are prevalent in all kingdoms of life have evolved for high innate domain stability to perform their specialized functions. The evolution of stability and its control in βγ-crystallins that possess either a canonical (mostly from microorganisms) or degenerate (principally found in vertebrate homologues) Ca2+-binding motif is not known. Using equilibrium unfolding of βγ-crystallin domains (26 wild-type domains and their mutants) in apo- and holo-forms, we demonstrate the presence of a stability gradient across these members, which is attained by the choice of residues in the (N/D)(N/D)XX(S/T)S Ca2+-binding motif. The occurrence of a polar, hydrophobic, or Ser residue at the 1st, 3rd, or 5th position of the motif is likely linked to a higher domain stability. Partial conversion of a microbe-type domain (with a canonical Ca2+-binding motif) to a vertebrate-type domain (with a degenerate Ca2+-binding motif) by mutating serine to arginine/lysine disables the Ca2+-binding but significantly augments its stability. Conversely, stability is compromised when arginine (in a vertebrate-type disabled domain) is replaced by serine (as a microbe type). Our results suggest that such conversions were acquired as a strategy for desired stability in vertebrate members at the cost of Ca2+-binding. In a physiological context, we demonstrate that a mutation such as an arginine to serine (R77S) mutation in this motif of γ-crystallin (partial conversion to microbe-type), implicated in cataracts, decreases the domain stability. Thus, this motif acts as a "central tuning knob" for innate as well as Ca2+-induced gain in stability, incorporating a stability gradient across βγ-crystallin members critical for their specialized functions.

NBD-Labeled Phospholipid Accelerates Apolipoprotein C-II Amyloid Fibril Formation but Is Not Incorporated into Mature Fibrils

Human apolipoprotein (apo) C-II is one of several lipid-binding proteins that self-assemble into fibrils and accumulate in disease-related amyloid deposits. A general characteristic of these amyloid deposits is the presence of lipids, known to modulate individual steps in amyloid fibril formation. ApoC-II fibril formation is activated by submicellar phospholipids but inhibited by micellar lipids. We examined the mechanism for the activation by submicellar lipids using the fluorescently labeled, short-chain phospholipid 1-dodecyl-[(7-nitro-2-1,3-benzoxadiazol-4-yl)amino]-2-hydroxyglycero-3-phosphocholine (NBD-lyso-12-PC). Addition of submicellar NBD-lyso-12-PC increased the rate of fibril formation by apoC-II approximately 2-fold. Stopped flow kinetic analysis using fluorescence detection and low, non-fibril-forming concentrations of apoC-II indicated NBD-lyso-12-PC binds rapidly, on the millisecond time scale, followed by the slower formation of discrete apoC-II tetramers. Sedimentation velocity analysis showed NBD-lyso-12-PC binds to both apoC-II monomers and tetramers at approximately five sites per monomer with an average dissociation constant of approximately 10 μM. Mature apoC-II fibrils formed in the presence of NBD-lyso-12-PC were devoid of lipid, indicating a purely catalytic role for submicellar lipids in the activation of apoC-II fibril formation. These studies demonstrate the catalytic potential of small amphiphilic molecules in controlling protein folding and fibril assembly pathways.