FeCrAl alloys are being deployed increasingly for industrial applications at elevated temperatures, primarily because their environment protection derives from the formation of an alumina scale. However, such protection is limited ultimately by chemical failure of the scale resulting in catastrophic, non-protective corrosion rates. The accurate prediction of component failure, therefore, is essential for economic and safety reasons.A model for the chemical failure of alumina scales has been developed, which predicts the lifetimes of commercial FeCrAlRE alloys in oxidising environments. This model is based on the consumption of aluminium in the alloy through scale growth and also takes into account the effect of mechanical scale failure/spallation accelerating the rate of aluminium depletion – over the temperature range (1100–1400°C) this model has been shown to be applicable, when the scale formed was α-Al2O3. Its growth and failure processes are essentially similar over the range, although, of course, rates are temperature dependent.In other potential technological applications, for example automotive catalytic converters, service temperatures can be much lower, in some instances as low as 750°C, while component sections are considerably thinner than for the high temperature (≥1100°C) structural applications.At these lower temperatures scale growth mechanisms are more complex, involving the formation initially of transitional aluminas, which in some instances transform with time into the more stable α alumina. Additionally, the role of the reactive element (RE) and also of the mechanical interaction between substrate and scale can vary over the lower temperature range.Component lifetime prediction at these temperatures is vital also. So, to initiate this action, this paper will present a preliminary assessment of the ability of the existing high temperature model to predict the lifetime of FeCrAlRE alloys in oxidising environments at temperatures in the range 750–1050°C.