Automatic Classification Method Research Articles

Novel Cooperative Automatic Modulation Classification Using Vectorized Soft Decision Fusion for Wireless Sensor Networks.

Cooperative automatic modulation classification (CAMC) using a swarm of sensors is intriguing nowadays as it would be much more robust than the conventional single-sensing-node automatic modulation classification (AMC) method. We propose a novel robust CAMC approach using vectorized soft decision fusion in this work. In each sensing node, the local Hamming distances between the graph features acquired from the unknown target signal and the training modulation candidate signals are calculated and transmitted to the fusion center (FC). Then, the global CAMC decision is made by the indirect vote which is translated from each sensing node’s Hamming-distance sequence. The simulation results demonstrate that, when the signal-to-noise ratio (SNR) was given by ≥ , our proposed new CAMC scheme’s correct classification probability could reach up close to . On the other hand, our proposed new CAMC scheme could significantly outperform the single-node graph-based AMC technique and the existing decision-level CAMC method in terms of recognition accuracy, especially in the low-SNR regime.

Automatic Classification of Basic Nursing Teaching Resources Based on the Fusion of Multiple Neural Networks

Automatic classification is one of the hot topics in the field of information retrieval and natural language processing, but it still faces many problems to be solved. The classic automated classification approach has a sluggish classification speed and poor processing accuracy for resources with a large quantity of data. Based on this, an automated classification approach based on the integration of various neural networks for fundamental nursing teaching materials was presented. The automatic classification method of teaching resources was designed by extracting the characteristics of teaching resources, establishing the model of multiple neural network integration, and designing the classification index of basic nursing teaching resources. The experimental findings suggest that this technique has higher chi-square test parameters and better outcomes for the automated classification of large instructional materials than the classic rough set automatic classification method.

Diagnosis of Thyroid Nodules Based on Image Enhancement and Deep Neural Networks

The diagnosis of thyroid nodules at an early stage is a challenging task. Manual diagnosis of thyroid nodules is labor-intensive and time-consuming. Meanwhile, due to the difference of instruments and technical personnel, the original thyroid nodule ultrasound images collected are very different. In order to make better use of ultrasound image information of thyroid nodules, some image processing methods are indispensable. In this paper, we developed a method for automatic thyroid nodule classification based on image enhancement and deep neural networks. The selected image enhancement method is histogram equalization, and the neural networks have four-layer network nodes in our experiments. The dataset in this paper consists of thyroid nodule images of 508 patients. The data are divided into 80% training and 20% validation sets. A comparison result demonstrates that our method can achieve a better performance than other normal machine learning methods. The experimental results show that our method has achieved 0.901961 accuracy, 0.894737 precision, 1 recall, and 0.944444 F1-score. At the same time, we also considered the influence of network structure, activation function of network nodes, number of training iterations, and other factors on the classification results. The experimental results show that the optimal network structure is 2500-40-2-1, the optimal activation function is logistic function, and the best number of training iterations is 500.

A deep learning approach for medical waste classification

As the demand for health grows, the increase in medical waste generation is gradually outstripping the load. In this paper, we propose a deep learning approach for identification and classification of medical waste. Deep learning is currently the most popular technique in image classification, but its need for large amounts of data limits its usage. In this scenario, we propose a deep learning-based classification method, in which ResNeXt is a suitable deep neural network for practical implementation, followed by transfer learning methods to improve classification results. We pay special attention to the problem of medical waste classification, which needs to be solved urgently in the current environmental protection context. We applied the technique to 3480 images and succeeded in correctly identifying 8 kinds of medical waste with an accuracy of 97.2%; the average F1-score of five-fold cross-validation was 97.2%. This study provided a deep learning-based method for automatic detection and classification of 8 kinds of medical waste with high accuracy and average precision. We believe that the power of artificial intelligence could be harnessed in products that would facilitate medical waste classification and could become widely available throughout China.

An Intelligent Deep Learning Enabled Marine Fish Species Detection and Classification Model

In recent times, marine fish species recognition becomes an important research area to protect the ocean environment. It is a tough and time-consuming operation to manually detect marine fish species on the ocean floor. Depending on the situation, extensive sample efforts may be required. These efforts might be harmful to the marine ecosystem. Automated classification methods are capable of properly classifying these fish on a consistent basis. An increasing number of people are becoming interested in utilizing electronic monitoring and reporting with artificial intelligence for the aim of fish identification and enhancing present techniques. It is becoming more usual to use video and pictures of fish (either underwater or on ships) in fishing operations. These techniques are operational, transportable, and non-invasive, and they provide high-quality pictures at a lower cost than traditional approaches. Automated image processing techniques such as Deep Learning (DL) and Machine Learning (ML) are now available, and they may be customized to perform efficient fish species identification and segmentation. In this aspect, this paper presents an Intelligent DL based Marine Fish Species Classification (IDL-MFSC) technique. The proposed IDL-MFSC technique involves three major processes such as pre-processing, fish detection and fish classification. Primarily, Weiner filtering-based noise removal process takes place as a pre-processing step. In addition, Mask R-CNN (Mask Region Based Convolutional Neural Networks) with Residual Network as a backbone network is used for fish detection. Moreover, Optimal Deep Kernel Extreme Learning Machine (ODKELM) based classification method is employed for determining the class labels of the marine fish species in which the parameter tuning of the DKELM model takes place using Water Wave Optimization (WWO) technique. The performance of the proposed method is tested using an openly accessible Fish4Knowledge dataset. The experimental result highlights the supremacy of the IDL-MFSC technique over the recent techniques with respect to various measures.

SegNet-based first-break picking via seismic waveform classification directly from shot gathers with sparsely distributed traces

Manually picking regularly and densely distributed first breaks (FBs) are critical for shallow velocity-model building in seismic data processing. However, it is time consuming. We employ the fully-convolutional SegNet to address this issue and present a fast automatic seismic waveform classification method to pick densely-sampled FBs directly from common-shot gathers with sparsely distributed traces. Through feeding a large number of representative shot gathers with missing traces and the corresponding binary labels segmented by manually interpreted fully-sampled FBs, we can obtain a well-trained SegNet model. When any unseen gather including the one with irregular trace spacing is inputted, the SegNet can output the probability distribution of different categories for waveform classification. Then FBs can be picked by locating the boundaries between one class on post-FBs data and the other on pre-FBs background. Two land datasets with each over 2000 shots are adopted to illustrate that one well-trained 25-layer SegNet can favorably classify waveform and further pick fully-sampled FBs verified by the manually-derived ones, even when the proportion of randomly missing traces reaches 50%, 21 traces are missing consecutively, or traces are missing regularly.

Classification of objects in images with distortions based on a two-stage topological analysis

The authors propose a method for automatic classification of spatial objects in images under conditions of a limited data set. The stability of the method to distortions appearing in images due to natural phenomena and partial overlap of urban infrastructure objects is investigated. High classification accuracy, when using existing approaches, requires a large training sample, including data sets with distortions, which significantly increases computational complexity. The paper proposes a method for a two-step topological analysis of images. Topological features are initially extracted by analyzing the image in the brightness range from 0 to 255, and then from 255 to 0. These features complement each other and reflect the topological structure of the object. Under certain deformations and distortions, the object preserves its structure in the form of extracted features. The advantage of the method is a small number of patterns, which reduces the computational complexity of training compared to neural networks. The proposed method is investigated and compared with the modern neural network approach. The study was performed on a DOTA dataset (Dataset for Object deTection in Aerial images) containing images of spatial objects of several classes. In the absence of distortion in the image, the neural network approach showed a classification accuracy of over 98 %, while the proposed method achieved about 82 %. Further distortions such as 90 degree rotation, 50 % narrowing and 50 % edge truncation and their combinations were applied in the experiment. The proposed method showed its robustness and outperformed the neural network approach. In the most difficult combination of the test, the decrease in classification accuracy of the neural network was 46 %, while the described method showed 12 %. The proposed method can be applied in cases with a high probability of distortion in the images. Such distortions arise in the field of geoinformatics when analyzing objects of various scales, under different weather conditions, partial overlap of one object with another, in the presence of shadows, etc. It is possible to use the proposed method in vision systems of industrial enterprises for automatic classification of the parts that belong to superimposed objects.

Semiconductor wafer defect classification using convolution neural network: a binary case

With the multitude of steps used in semiconductor industry, automation is being practiced extensively in its manufacturing processes to guarantee quality of manufactured chips and improvement in production. At front end of line, wafer are probed and defective chips are segregated. From this data wafer bin map are generated, these show defects on the surface of wafers. If analysis of wafer bin map is done manually, this may result in incorrect categorization of defects due to human error and lack of judgement. Thus, the rationale behind this research study is to determine the scope of vision-based methods for automatic classification of wafer defects. In view of this, a classifier which detects Type A and Type B defects in wafers is proposed. It involves a Convolution Neural Network (CNN) based binary classifier. 250 Images of each class of wafer bin map dataset, is used to conduct the study on five layer CNN architecture. The proposed setup gives the test accuracy of 97.7%.

Research on UHF PD detection method based on improved DBN

With the development of power grid technology and the widespread application of gas insulator switchgear (GIS) equipment, the power supply reliability of the power system has been greatly improved, but the problem of partial discharge (PD) faults in GIS has always been prominent, seriously affecting the safe and stable operation of the power grid. How to quickly determine the type and cause of GIS discharge is the key to online PD detection. In this paper, in order to deal with the very complicated data processing of ultra-high frequency (UHF) PD, the time-consuming and low efficiency of manually judging the type of PD, a classification model of UHF PD system based on deep confidence network (DBN) is established and an automatic classification method for UHF PD based on improved DBN is proposed; the activation function Sigmoid is improved to effectively prevent the occurrence of the gradient disappearance problem; the optimized DBN parameters are used to train and classify data of different PD types. The classification accuracy rate of the test results reached 96.7%, realizing the rapid classification evaluation of UHF PD types.

Recent advances of machine vision technology in fish classification

AbstractAutomatic classification of different species of fish is important for the comprehension of marine ecology, fish behaviour analysis, aquaculture management, and fish health monitoring. In recent years, many automatic classification methods have been developed, among which machine vision-based classification methods are widely used with the advantages of being fast and non-destructive. In addition, the successful application of rapidly emerging deep learning techniques in machine vision has brought new opportunities for fish classification. This paper provides an overview of machine vision models applied in the field of fish classification, followed by a detailed discussion of specific applications of various classification methods. Furthermore, the challenges and future research directions in the field of fish classification are discussed. This paper would help researchers and practitioners to understand the applicability of machine vision in fish classification and encourage them to develop advanced algorithms and models to address the complex problems that exist in fish classification practice.

Two-Stage Deep Neural Network via Ensemble Learning for Melanoma Classification.

Melanoma is a skin disease with a high fatality rate. Early diagnosis of melanoma can effectively increase the survival rate of patients. There are three types of dermoscopy images, malignant melanoma, benign nevis, and seborrheic keratosis, so using dermoscopy images to classify melanoma is an indispensable task in diagnosis. However, early melanoma classification works can only use the low-level information of images, so the melanoma cannot be classified efficiently; the recent deep learning methods mainly depend on a single network, although it can extract high-level features, the poor scale and type of the features limited the results of the classification. Therefore, we need an automatic classification method for melanoma, which can make full use of the rich and deep feature information of images for classification. In this study, we propose an ensemble method that can integrate different types of classification networks for melanoma classification. Specifically, we first use U-net to segment the lesion area of images to generate a lesion mask, thus resize images to focus on the lesion; then, we use five excellent classification models to classify dermoscopy images, and adding squeeze-excitation block (SE block) to models to emphasize the more informative features; finally, we use our proposed new ensemble network to integrate five different classification results. The experimental results prove the validity of our results. We test our method on the ISIC 2017 challenge dataset and obtain excellent results on multiple metrics; especially, we get 0.909 on accuracy. Our classification framework can provide an efficient and accurate way for melanoma classification using dermoscopy images, laying the foundation for early diagnosis and later treatment of melanoma.

Real-time defect detection and classification on wood surfaces using deep learning

This paper proposes a novel method for automatic realtime defect detection and classification on wood surfaces. Our method uses deep convolutional neural network (CNN) based approach Faster R-CNN (Region-based CNN ) as detector and MobileNetV3 as backbone network for feature extraction. The key difference of our approach from the existing methods is that it detects knots and other type of defects efficiently and does the classification in real-time from the input video frames. Speed and accuracy is the main focus of our work. In the case of the industrial quality control and inspection such as defects detection, the task of detection and classification needs to be done in real-time on a computationally limited processing units or commodity processors. Our trained model is a light weight, and it can even be deployed on systems for example mobile and edge devices. We have pre-trained the MobileNet V3 on large image dataset for feature extraction. We use Faster R-CNN for detection and classification of defects. The system does the real-time detection and classification on an average of 37 frames per second from input video frames, using low cost and low memory GPU (Graphics Processing Unit). Our method has achieved an overall accuracy of 99% in detecting and classifying defects.

Using supervised learning techniques to automatically classify vortex-induced vibration in long-span bridges

Owing to a capacity for high flexibility and low damping, long-span bridges are subjected to vortex-induced vibrations (VIVs) under operational conditions. Long-term monitoring data with machine-learning algorithms indicate the potential for automating the VIV assessment of long-span bridges. These methods require a significant amount of labeled data, whereas obtaining such data is normally not feasible owing to the limited availability of VIV datasets. This study leverages supervised learning techniques to develop an automatic classification method for VIVs. To address manual data labeling and develop an optimum model, a three-stage strategy is presented: 1) Semi-supervised labeling, 2) deep neural network (DNN) training, and 3) identification of an optimum parameter range. First, semi-supervised labeling is employed to automatically label the dataset into either VIV or non-VIV classes. Second, a DNN model is trained using the wind and vibrational features of labeled data. Finally, the optimum parameter range is determined by analyzing the peak factor distribution, confusion matrix, and corresponding velocity–amplitude curve of the classified test datasets. An application of the model to a long-span, cable-stayed bridge is illustrated to assess the classification performance based on actual monitoring data. The DNN with the suggested labeling process demonstrates consistent and accurate detection of VIVs.

Image-based neural architecture automatic search method for hyperspectral image classification

Convolutional neural networks (CNNs) have shown excellent performance for hyperspectral image (HSI) classification due to their characteristics of both local connectivity and sharing weights. Nevertheless, with the in-depth study of network architecture, merely manual empirical design can no longer meet the current scenario needs. In addition, the existing CNN-based frameworks are heavily affected by the redundant three-dimensional cubes of the input and result in inefficient description issues of HSIs. We propose an image-based neural architecture automatic search framework (I-NAS) as an alternative to CNN. First, to alleviate the redundant spectral–spatial distribution, I-NAS feeds a full image into the framework via a label masking fashion. Second, an end-to-end cell-based structure search space is considered to enrich the feature representation. Then, it determined the optimal cells by employing a gradient descent search algorithm. Finally, the well-trained CNN architecture is automatically constructed by stacking the optimal cells. The experimental results from two real HSI datasets indicate that our proposal can provide a competitive performance in classification.

A Modified XG Boost Classifier Model for Detection of Seizures and Non-Seizures

Diagnosis of Epilepsy is immensely important but challenging process, especially while using traditional manual seizure detection methods with the help of neurologists or brain experts’ guidance which are time consuming. Thus, an automated classification method is require to quickly detect seizures and non-seizures. Therefore, a machine learning algorithm based on a modified XGboost classifier model is employed to detect seizures quickly and improve classification accuracy. A focal loss function is employed with traditional XGboost classifier model to minimize mismatch of training and testing samples and enhance efficiency of the classification model. Here, CHB-MIT SCALP Electroencephalography (EEG) dataset is utilized to test the proposed classification model. Here, data gathered for all 24 patients from CHB-MIT Database is used to analyze the performance of proposed classification model. Here, 2-class-seizure experimental results of proposed classification model are compared against several state-of-art-seizure classification models. Here, cross validation experiments determine nature of 2-class-seizure as the prediction is seizure or non-seizure. The metrics results for average sensitivity and average specificity are nearly 100%. The proposed model achieves improvement in terms of average sensitivity against the best traditional method as 0.05% and for average specificity as 1%. The proposed modified XGBoost classifier model outperforms all the state-of-art-seizure detection techniques in terms of average sensitivity, average specificity.

Association Mining of Near Misses in Hydropower Engineering Construction Based on Convolutional Neural Network Text Classification.

Accidents of various types in the construction of hydropower engineering projects occur frequently, which leads to significant numbers of casualties and economic losses. Identifying and eliminating near misses are a significant means of preventing accidents. Mining near-miss data can provide valuable information on how to mitigate and control hazards. However, most of the data generated in the construction of hydropower engineering projects are semi-structured text data without unified standard expression, so data association analysis is time-consuming and labor-intensive. Thus, an artificial intelligence (AI) automatic classification method based on a convolutional neural network (CNN) is adopted to obtain structured data on near-miss locations and near-miss types from safety records. The apriori algorithm is used to further mine the associations between “locations” and “types” by scanning structured data. The association results are visualized using a network diagram. A Sankey diagram is used to reveal the information flow of near-miss specific objects using the “location ⟶ type” strong association rule. The proposed method combines text classification, association rules, and the Sankey diagrams and provides a novel approach for mining semi-structured text. Moreover, the method is proven to be useful and efficient for exploring near-miss distribution laws in hydropower engineering construction to reduce the possibility of accidents and efficiently improve the safety level of hydropower engineering construction sites.

Methods for automatic malware analysis and classification: a survey

Methods for automatic malware analysis and classification: a survey

Primena veštačke neuralne mreže u određivanju obraza tkanja

The weave pattern (texture) of woven fabric is considered to be an important factor of the design and production of high-quality fabric. Traditionally, the recognition of woven fabric has a lot of challenges due to its manual visual inspection. The approaches based on early machine learning algorithms directly depend on handcrafted features, which are time-consuming and occurs more errors. Hence, an automated system is needed for classification of woven fabric to improve productivity. Along with the rapid development of computer vision, the automatic and efficient methods for woven fabric classification are desperately needed. The prediction of fabric weave pattern Fabric is done by acquiring the high-quality images of the fabric. Then the acquired images are subjected to weave classification algorithm. The output of the processed image is used as an input to the Artificial Neural Network (ANN) which uses back propagation algorithm to calculate the weighted factors and generates the desired classification of weave patterns as an output. In this review paper discussed about the study on the various neural network that are used for prediction of fabric weave pattern.

Improved Residual Network for Automatic Classification Grading of Lettuce Freshness

To solve the problem of the low efficiency of traditional lettuce freshness classification methods and sample damage, we proposed an automatic lettuce freshness classification method based on improved deep residuals convolutional neural network (Im-ResNet). We built an image acquisition system to obtain the freshness classification dataset of lettuce leaves. For improving the classification accuracy, we developed an image acquisition system for curating the freshness of lettuce leaves. Then, we proposed a novel method that was derived from the existing ResNet-50 (which uses ReLU activation function) known as Improved Residual Networks (Im-ResNet): the new method factored extra convolutional layer, pooling layer, fully-connected layers, and a random ReLU (RReLU) activation function. We also performed the corresponding experiments using the Im-ResNet network compared with four network architectures (AlexNet, GoogleNet, VGG16 and ResNet50). The experimental results showed that the proposed network had more significant advantages in the recognition accuracy and loss value of lettuce freshness compared with the traditional deep networks. The recognition accuracy of the validation set of the proposed model can reach to 95.60%. Different from the physical and chemical methods, our scheme can automatically and non-destructively classify the freshness of lettuce.

Deep-learning Hopping Capture Model for Automatic Modulation Classification of Wireless Communication Signals

Recent years have witnessed a surge of developments in deep learning (DL) motivated by a variety of contemporary applications. The conventional DL-based automatic modulation classification (AMC) methods are always relying on a great quan- tity of data. In this paper, we propose a DL-based AMC model with short data for spectrum sensing of wireless communication signals. First, a hopping transform unit is proposed to represent the transient variation occurred either by frequency, amplitude or phase modulations. Second, a bidirectional long short-term memory (Bi-LSTM) based hopping feature perception model, namely deep-learning hopping capture model (DHCM), is built for the AMC. A comprehensive comparison of the DHCM with other existing methods is then provided under various signal-to- noise ratios (SNRs). The experimental results demonstrate the superiority of the proposed method under short data.